Filter by
Drive Style
Drive Size
Sold As
Grip Style
Overall Length
Shaft Length
Length
Performance
Shaft Overall Width
Manufacturer
For Bit Shank Type
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Shank Type
Plain-Grip Screwdrivers
 |
Shaft | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Drive Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Material | Mfr. | Each | |||
Phillips | ||||||||||
Premium | ||||||||||
| No. 000 | Standard | 4 1/2" | 2" | 1/8" | Black-Oxide Steel | Mayhew | 6970A101 | 00000 | ||
| No. 00 | Standard | 5" | 2 1/2" | 1/8" | Black-Oxide Steel | Mayhew | 5682A77 | 0000 | ||
| No. 0 | Standard | 6 1/4" | 3" | 1/8" | Black-Oxide Steel | Mayhew | 5682A91 | 0000 | ||
| No. 0 | Long | 9 1/4" | 6" | 1/8" | Black-Oxide Steel | Mayhew | 6970A102 | 0000 | ||
| No. 1 | Stubby | 3 1/2" | 1 1/2" | 3/16" | Black-Oxide Steel | Mayhew | 5682A78 | 0000 | ||
| No. 1 | Standard | 6 3/4" | 3" | 3/16" | Black-Oxide Steel | Mayhew | 5682A27 | 0000 | ||
| No. 1 | Long | 10" | 6" | 3/16" | Black-Oxide Steel | Mayhew | 5682A79 | 0000 | ||
| No. 1 | Long | 14" | 10" | 3/16" | Black-Oxide Steel | Mayhew | 5682A92 | 0000 | ||
| No. 2 | Stubby | 3 1/2" | 1 1/2" | 1/4" | Black-Oxide Steel | Mayhew | 5682A39 | 0000 | ||
| No. 2 | Standard | 8 1/4" | 4" | 1/4" | Black-Oxide Steel | Mayhew | 5682A28 | 0000 | ||
| No. 2 | Long | 10 1/4" | 6" | 1/4" | Black-Oxide Steel | Mayhew | 5682A44 | 0000 | ||
| No. 2 | Long | 12 1/2" | 8" | 1/4" | Black-Oxide Steel | Mayhew | 5682A93 | 00000 | ||
| No. 2 | Long | 16 1/4" | 12" | 1/4" | Black-Oxide Steel | Mayhew | 5682A58 | 00000 | ||
| No. 2 | Long | 20 1/4" | 16" | 1/4" | Black-Oxide Steel | Mayhew | 5682A69 | 00000 | ||
| No. 2 | Long | 24 1/2" | 20" | 1/4" | Black-Oxide Steel | Mayhew | 6970A103 | 00000 | ||
| No. 3 | Standard | 10 3/4" | 6" | 5/16" | Black-Oxide Steel | Mayhew | 5682A29 | 0000 | ||
| No. 3 | Long | 13" | 8" | 5/16" | Black-Oxide Steel | Mayhew | 6970A104 | 00000 | ||
| No. 4 | Standard | 13 1/4" | 8" | 3/8" | Black-Oxide Steel | Mayhew | 5682A31 | 00000 | ||
Slotted | ||||||||||
Premium | ||||||||||
| 5/64" | Standard | 4 3/16" | 2" | 1/8" | Black-Oxide Steel | Mayhew | 6970A105 | 0000 | ||
| 3/32" | Standard | 5" | 2 1/2" | 1/8" | Black-Oxide Steel | Mayhew | 5682A73 | 0000 | ||
| 1/8" | Standard | 5 3/4" | 3" | 1/8" | Black-Oxide Steel | Mayhew | 5682A37 | 0000 | ||
| 1/8" | Long | 6 3/4" | 4" | 1/8" | Black-Oxide Steel | Mayhew | 5682A64 | 0000 | ||
| 1/8" | Long | 8 3/4" | 6" | 1/8" | Black-Oxide Steel | Mayhew | 5682A65 | 0000 | ||
| 1/8" | Long | 12 1/2" | 8" | 1/8" | Black-Oxide Steel | Mayhew | 6970A106 | 0000 | ||
| 3/16" | Stubby | 3 1/2" | 1 1/2" | 3/16" | Black-Oxide Steel | Mayhew | 5682A11 | 0000 | ||
| 3/16" | Standard | 7" | 3" | 3/16" | Black-Oxide Steel | Mayhew | 5682A15 | 0000 | ||
| 3/16" | Long | 8" | 4" | 3/16" | Black-Oxide Steel | Mayhew | 5682A75 | 0000 | ||
| 3/16" | Long | 9 3/4" | 6" | 3/16" | Black-Oxide Steel | Mayhew | 5682A16 | 0000 | ||
| 3/16" | Long | 11 3/4" | 8" | 3/16" | Black-Oxide Steel | Mayhew | 5682A32 | 0000 | ||
| 3/16" | Long | 14" | 10" | 3/16" | Black-Oxide Steel | Mayhew | 6970A107 | 00000 | ||
| 1/4" | Stubby | 3 1/2" | 1 1/2" | 7/16" | Black-Oxide Steel | Mayhew | 5682A74 | 0000 | ||
| 1/4" | Standard | 8 1/2" | 4" | 1/4" | Black-Oxide Steel | Mayhew | 5682A81 | 0000 | ||
| 1/4" | Long | 10 1/2" | 6" | 1/4" | Black-Oxide Steel | Mayhew | 5682A82 | 0000 | ||
| 1/4" | Long | 12 1/2" | 8" | 1/4" | Black-Oxide Steel | Mayhew | 6970A108 | 00000 | ||
| 1/4" | Long | 16 1/2" | 12" | 1/4" | Black-Oxide Steel | Mayhew | 5682A76 | 00000 | ||
| 1/4" | Long | 20 1/2" | 16" | 1/4" | Black-Oxide Steel | Mayhew | 6970A109 | 00000 | ||
| 1/4" | Long | 28 1/2" | 23 3/4" | 1/4" | Black-Oxide Steel | Mayhew | 6970A17 | 00000 | ||
| 5/16" | Standard | 11" | 6" | 5/16" | Black-Oxide Steel | Mayhew | 5682A83 | 00000 | ||
| 5/16" | Long | 13" | 8" | 5/16" | Black-Oxide Steel | Mayhew | 5682A84 | 00000 | ||
| 5/16" | Long | 15" | 10" | 5/16" | Black-Oxide Steel | Mayhew | 6970A111 | 00000 | ||
| 3/8" | Standard | 13" | 8" | 3/8" | Black-Oxide Steel | Mayhew | 5682A85 | 00000 | ||
| 3/8" | Long | 15" | 10" | 3/8" | Black-Oxide Steel | Mayhew | 5682A86 | 00000 | ||
| 3/8" | Long | 17" | 12" | 3/8" | Black-Oxide Steel | Mayhew | 5682A87 | 00000 | ||
| 5/8" | Long | 25" | 19 3/4" | 1/2" | Black-Oxide Steel | Mayhew | 6970A14 | 00000 | ||
Torx | ||||||||||
Premium | ||||||||||
| T6 | Standard | 4 1/2" | 2" | 3/16" | Black-Oxide Steel | Mayhew | 5756A32 | 00000 | ||
| T7 | Standard | 4 1/2" | 2" | 3/16" | Black-Oxide Steel | Mayhew | 5756A11 | 00000 | ||
| T8 | Standard | 5" | 2 1/2" | 3/16" | Black-Oxide Steel | Mayhew | 5756A12 | 00000 | ||
| T9 | Standard | 5" | 2 1/2" | 3/16" | Black-Oxide Steel | Mayhew | 5756A13 | 0000 | ||
| T10 | Standard | 5 1/2" | 3" | 3/16" | Black-Oxide Steel | Mayhew | 5756A14 | 00000 | ||
| T15 | Standard | 7" | 3" | 3/16" | Black-Oxide Steel | Mayhew | 5756A15 | 00000 | ||
| T20 | Standard | 7" | 3" | 3/16" | Black-Oxide Steel | Mayhew | 5756A16 | 00000 | ||
| T25 | Standard | 8" | 4" | 3/16" | Black-Oxide Steel | Mayhew | 5756A17 | 00000 | ||
| T27 | Standard | 8" | 4" | 1/4" | Black-Oxide Steel | Mayhew | 5756A18 | 00000 | ||
| T30 | Standard | 8" | 4" | 1/4" | Black-Oxide Steel | Mayhew | 5756A19 | 00000 | ||
| T40 | Standard | 10 1/8" | 5 1/8" | 5/16" | Black-Oxide Steel | Mayhew | 5756A2 | 00000 | ||
| T45 | Standard | 10 1/8" | 5 1/8" | 5/16" | Black-Oxide Steel | Mayhew | 5756A21 | 00000 | ||
| T50 | Standard | 10 1/8" | 5 1/8" | 3/8" | Black-Oxide Steel | Mayhew | 5756A22 | 00000 | ||
Drilled Spanner | ||||||||||
Premium | ||||||||||
| No. 4 | Standard | 8" | 4" | 1/4" | Steel | Allegheny Bolt & Screw | 94062A113 | 00000 | ||
| No. 6 | Standard | 8" | 4" | 1/4" | Steel | Allegheny Bolt & Screw | 94062A114 | 00000 | ||
| No. 8 | Standard | 8" | 4" | 1/4" | Steel | Allegheny Bolt & Screw | 94062A116 | 00000 | ||
| No. 10 | Standard | 8" | 4" | 1/4" | Steel | Allegheny Bolt & Screw | 94062A117 | 00000 | ||
| No. 12 | Standard | 8" | 4" | 1/4" | Steel | Allegheny Bolt & Screw | 94062A118 | 00000 | ||
| No. 14 | Standard | 8" | 4" | 5/16" | Steel | Allegheny Bolt & Screw | 94062A119 | 00000 | ||
Tamper-Resistant Torx | ||||||||||
Premium | ||||||||||
| T8 | Long | 10" | 6" | 3/16" | Black-Oxide Steel | Mayhew | 6970A112 | 00000 | ||
| T10 | Long | 10" | 6" | 3/16" | Black-Oxide Steel | Mayhew | 6970A113 | 00000 | ||
| T15 | Long | 10" | 6" | 3/16" | Black-Oxide Steel | Mayhew | 6970A114 | 00000 | ||
| T20 | Long | 10" | 6" | 3/16" | Black-Oxide Steel | Mayhew | 6970A115 | 00000 | ||
| T25 | Long | 10" | 6" | 3/16" | Black-Oxide Steel | Mayhew | 6970A116 | 00000 | ||
Square | ||||||||||
Premium | ||||||||||
| No. 0 | Standard | 6 1/4" | 3" | 1/8" | Black-Oxide Steel | Mayhew | 6970A117 | 0000 | ||
| No. 1 | Standard | 8" | 4" | 3/16" | Black-Oxide Steel | Mayhew | 6970A118 | 00000 | ||
| No. 2 | Standard | 8 1/2" | 4" | 1/4" | Black-Oxide Steel | Mayhew | 6970A119 | 00000 | ||
| No. 3 | Standard | 8 1/2" | 4" | 1/4" | Black-Oxide Steel | Mayhew | 6970A121 | 00000 | ||
| No. 4 | Standard | 9 1/2" | 5" | 5/16" | Black-Oxide Steel | Mayhew | 6970A122 | 00000 | ||
Screwdrivers
 |
 |
Grooved Tip |
A staple in any toolbox, these are your go-to screwdrivers for routine maintenance and repair. The handle is made from a combination of soft, grippy plastic for high torque and smooth, hard plastic for quick grip adjustments and high-speed turning. It's also contoured to maximize comfort and minimize hand strain, fatigue, and blisters, even with extended use.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
Stubby—An extra-short handle and shaft squeeze behind mounted equipment and inside small panels.
Standard Length—The most common screwdriver length for a specific drive size.
Long—An extended shaft turns screws in deep recesses other screwdrivers can't reach.
Grooved Tip—Bites into the screw slot for a firm hold, so you can make fast, easy turns without slippage.
Shaft | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Drive Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Tip Texture | Material | Mfr. | Each | |||
Phillips | |||||||||||
Premium | |||||||||||
| No. 0 | Standard | 6 3/8" | 2 3/8" | 1/8" | — | Chrome-Plated Steel | Williams | 7127A32 | 00000 | ||
| No. 1 | Stubby | 3" | 1" | 3/16" | — | Chrome-Plated Steel | Williams | 7127A33 | 0000 | ||
| No. 1 | Standard | 7" | 3 1/8" | 3/16" | Grooved | Chrome-Plated Steel | Wera | 55095A32 | 0000 | ||
| No. 1 | Long | 11 3/4" | 7 7/8" | 3/16" | Grooved | Chrome-Plated Steel | Wera | 55095A33 | 0000 | ||
| No. 2 | Standard | 8" | 3 15/16" | 1/4" | Grooved | Chrome-Plated Steel | Wera | 55095A35 | 00000 | ||
| No. 2 | Long | 10" | 5 7/8" | 1/4" | Grooved | Chrome-Plated Steel | Wera | 55095A36 | 00000 | ||
| No. 2 | Long | 12 11/16" | 7 7/8" | 1/4" | — | Chrome-Plated Steel | Williams | 7127A38 | 00000 | ||
| No. 3 | Standard | 10 1/4" | 6" | 5/16" | Grooved | Chrome-Plated Steel | Wera | 7359A64 | 00000 | ||
| No. 3 | Standard | 10 11/16" | 5 7/8" | 5/16" | — | Chrome-Plated Steel | Williams | 7127A39 | 00000 | ||
Slotted | |||||||||||
Premium | |||||||||||
| 3/32" | Long | 7 3/4" | 2 15/16" | 3/32" | — | Chrome-Plated Steel | Williams | 7127A11 | 0000 | ||
| 1/8" | Standard | 7 3/4" | 2 15/16" | 1/8" | — | Chrome-Plated Steel | Williams | 7127A12 | 0000 | ||
| 1/8" | Long | 9 11/16" | 4 15/16" | 1/8" | — | Chrome-Plated Steel | Williams | 7127A13 | 0000 | ||
| 9/64" | Standard | 6 3/16" | 3" | 5/32" | Grooved | Chrome-Plated Steel | Wera | 7359A38 | 0000 | ||
| 5/32" | Standard | 6 3/4" | 3 1/2" | 5/32" | Grooved | Chrome-Plated Steel | Wera | 7359A39 | 0000 | ||
| 5/32" | Standard | 8 3/4" | 3 15/16" | 5/32" | — | Chrome-Plated Steel | Williams | 7127A18 | 0000 | ||
| 5/32" | Long | 9 15/16" | 6" | 5/32" | — | Chrome-Plated Steel | Williams | 7127A14 | 0000 | ||
| 3/16" | Standard | 7 3/8" | 3 1/2" | 3/16" | Grooved | Chrome-Plated Steel | Wera | 55095A28 | 0000 | ||
| 7/32" | Stubby | 3 1/4" | 1" | 3/16" | — | Chrome-Plated Steel | Williams | 7127A44 | 00000 | ||
| 7/32" | Standard | 7 13/16" | 4" | 1/4" | Grooved | Chrome-Plated Steel | Wera | 7359A41 | 00000 | ||
| 7/32" | Standard | 8 3/4" | 3 15/16" | 7/32" | — | Chrome-Plated Steel | Williams | 7127A21 | 0000 | ||
| 1/4" | Stubby | 3 7/8" | 1" | 1/4" | — | Chrome-Plated Steel | Williams | 7127A19 | 00000 | ||
| 1/4" | Standard | 8 1/4" | 4" | 1/4" | — | Chrome-Plated Steel | Williams | 7127A27 | 00000 | ||
| 1/4" | Standard | 9" | 5" | 5/32" | Grooved | Chrome-Plated Steel | Wera | 7359A37 | 00000 | ||
| 1/4" | Standard | 9 11/16" | 4 15/16" | 1/4" | — | Chrome-Plated Steel | Williams | 7127A62 | 00000 | ||
| 1/4" | Long | 10 11/16" | 5 7/8" | 1/4" | — | Chrome-Plated Steel | Williams | 7127A63 | 00000 | ||
| 9/32" | Standard | 9" | 5" | 9/32" | Grooved | Chrome-Plated Steel | Wera | 7359A42 | 00000 | ||
| 5/16" | Standard | 10 11/16" | 5 7/8" | 5/16" | — | Chrome-Plated Steel | Williams | 7127A23 | 00000 | ||
| 5/16" | Standard | 11 11/16" | 6 7/8" | 5/16" | — | Chrome-Plated Steel | Williams | 7127A24 | 00000 | ||
| 11/32" | Standard | 10 1/4" | 6" | 3/8" | Grooved | Chrome-Plated Steel | Wera | 7359A43 | 00000 | ||
| 3/8" | Standard | 11 1/4" | 7" | 3/8" | Grooved | Chrome-Plated Steel | Wera | 7359A44 | 00000 | ||
| 3/8" | Standard | 14 1/4" | 7 7/8" | 3/8" | — | Chrome-Plated Steel | Williams | 7127A25 | 00000 | ||
Hex | |||||||||||
Premium | |||||||||||
| 2 mm | Standard | 5 3/4" | 3" | 1/8" | — | Chrome-Plated Steel | Wera | 57585A53 | 0000 | ||
| 2.5 mm | Standard | 6 3/16" | 3" | 1/8" | — | Chrome-Plated Steel | Wera | 57585A54 | 0000 | ||
| 3 mm | Standard | 6 3/16" | 3" | 5/32" | — | Chrome-Plated Steel | Wera | 57585A55 | 0000 | ||
| 4 mm | Standard | 6 13/16" | 3" | 3/16" | — | Chrome-Plated Steel | Wera | 57585A56 | 0000 | ||
| 5 mm | Standard | 7 5/16" | 3 1/16" | 1/4" | — | Chrome-Plated Steel | Wera | 57585A57 | 0000 | ||
| 6 mm | Standard | 7 5/16" | 3 1/16" | 9/32" | — | Chrome-Plated Steel | Wera | 57585A58 | 0000 | ||
| 8 mm | Standard | 8 1/2" | 3 15/16" | 3/8" | — | Chrome-Plated Steel | Wera | 57585A71 | 00000 | ||
Tamper-Resistant Torx | |||||||||||
Premium | |||||||||||
| T7 | Standard | 6 1/2" | 2 7/16" | 1/8" | — | Chrome-Plated Steel | Wiha | 83335A68 | 0000 | ||
| T8 | Standard | 6 1/2" | 2 7/16" | 1/8" | — | Chrome-Plated Steel | Wiha | 83335A69 | 0000 | ||
| T9 | Standard | 6 3/4" | 2 7/16" | 5/32" | — | Chrome-Plated Steel | Wiha | 83335A59 | 0000 | ||
| T10 | Standard | 7 1/2" | 3 1/8" | 5/32" | — | Chrome-Plated Steel | Wiha | 83335A61 | 0000 | ||
| T15 | Standard | 7 1/2" | 3 1/8" | 5/32" | — | Chrome-Plated Steel | Wiha | 83335A62 | 0000 | ||
| T20 | Standard | 8 1/4" | 3 15/16" | 5/32" | — | Chrome-Plated Steel | Wiha | 83335A63 | 00000 | ||
| T25 | Standard | 8 1/4" | 3 15/16" | 3/16" | — | Chrome-Plated Steel | Wiha | 83335A64 | 00000 | ||
| T27 | Standard | 9 1/4" | 4 1/2" | 7/32" | — | Chrome-Plated Steel | Wiha | 83335A65 | 00000 | ||
| T30 | Standard | 9 1/4" | 4 1/2" | 1/4" | — | Chrome-Plated Steel | Wiha | 83335A66 | 00000 | ||
| T40 | Standard | 10" | 5 1/8" | 9/32" | — | Chrome-Plated Steel | Wiha | 83335A67 | 00000 | ||
Torx Plus | |||||||||||
Premium | |||||||||||
| IP5 | Standard | 5 1/8" | 2 3/8" | 5/32" | — | Chrome-Plated Steel | Wera | 5259A32 | 00000 | ||
| IP6 | Standard | 6 1/2" | 2 7/16" | 1/8" | — | Chrome-Plated Steel | Wiha | 5259A11 | 0000 | ||
| IP7 | Standard | 6 1/2" | 2 7/16" | 1/8" | — | Chrome-Plated Steel | Wiha | 5259A12 | 0000 | ||
| IP8 | Standard | 6 3/4" | 2 7/16" | 5/32" | — | Chrome-Plated Steel | Wiha | 5259A13 | 0000 | ||
| IP9 | Standard | 6 3/4" | 2 7/16" | 5/32" | — | Chrome-Plated Steel | Wiha | 5259A14 | 0000 | ||
| IP10 | Standard | 7 1/2" | 3 1/8" | 5/32" | — | Chrome-Plated Steel | Wiha | 5259A15 | 0000 | ||
| IP15 | Standard | 7 1/2" | 3 1/8" | 5/32" | — | Chrome-Plated Steel | Wiha | 5259A16 | 0000 | ||
| IP20 | Standard | 8 1/4" | 3 15/16" | 3/16" | — | Chrome-Plated Steel | Wiha | 5259A17 | 0000 | ||
| IP25 | Standard | 8 1/4" | 3 15/16" | 7/32" | — | Chrome-Plated Steel | Wiha | 5259A18 | 0000 | ||
| IP30 | Standard | 9 1/4" | 4 1/2" | 9/32" | — | Chrome-Plated Steel | Wiha | 5259A21 | 00000 | ||
Square | |||||||||||
Premium | |||||||||||
| No. 00 | Standard | 5 9/16" | 2 3/8" | 1/8" | — | Chrome-Plated Steel | Wera | 5830A21 | 0000 | ||
| No. 0 | Standard | 5 9/16" | 2 3/8" | 5/32" | — | Chrome-Plated Steel | Wera | 5830A22 | 0000 | ||
| No. 1 | Standard | 8 1/4" | 3 15/16" | 5/32" | — | Chrome-Plated Steel | Wiha | 5830A12 | 0000 | ||
| No. 1 | Long | 11 3/4" | 8" | 3/16" | — | Chrome-Plated Steel | Wera | 5830A23 | 0000 | ||
| No. 2 | Stubby | 3 1/8" | 1" | 1/4" | — | Chrome-Plated Steel | Wera | 5830A28 | 0000 | ||
| No. 2 | Standard | 10 1/2" | 5 15/16" | 3/16" | — | Chrome-Plated Steel | Wiha | 5830A13 | 0000 | ||
| No. 2 | Long | 12" | 8" | 1/4" | — | Chrome-Plated Steel | Wera | 5830A24 | 00000 | ||
| No. 2 | Long | 16" | 12" | 1/4" | — | Chrome-Plated Steel | Wera | 5830A25 | 00000 | ||
| No. 3 | Standard | 10 1/2" | 5 15/16" | 1/4" | — | Chrome-Plated Steel | Wiha | 5830A14 | 0000 | ||
| No. 4 | Standard | 12 1/4" | 8" | 5/16" | — | Chrome-Plated Steel | Wera | 5830A26 | 00000 | ||
JIS | |||||||||||
Premium | |||||||||||
| No. 0 | Standard | 6" | 2 15/16" | 1/8" | — | Chrome-Plated Steel | Vessel | 53325A64 | 0000 | ||
| No. 1 | Stubby | 3" | 1" | 1/4" | — | Chrome-Plated Steel | Vessel | 53325A62 | 00000 | ||
| No. 1 | Standard | 7 5/16" | 3" | 7/32" | — | Chrome-Plated Steel | Vessel | 53325A32 | 0000 | ||
| No. 2 | Stubby | 3" | 1" | 1/4" | — | Chrome-Plated Steel | Vessel | 53325A63 | 00000 | ||
| No. 2 | Standard | 8 1/4" | 3 15/16" | 1/4" | — | Chrome-Plated Steel | Vessel | 53325A33 | 00000 | ||
| No. 3 | Standard | 11" | 5 15/16" | 5/16" | — | Chrome-Plated Steel | Vessel | 53325A34 | 00000 | ||
Pozidriv® | |||||||||||
Premium | |||||||||||
| No. 1 | Standard | 7" | 3 1/8" | 3/16" | Grooved | Chrome-Plated Steel | Wera | 7359A71 | 00000 | ||
| No. 1 | Standard | 7 1/2" | 3 1/8" | 3/16" | — | Chrome-Plated Steel | Wiha | 5682A51 | 0000 | ||
| No. 1 | Standard | 7 3/4" | 2 15/16" | 3/16" | — | Chrome-Plated Steel | Williams | 7127A51 | 0000 | ||
| No. 2 | Standard | 8 1/4" | 4" | 1/4" | Grooved | Chrome-Plated Steel | Wera | 7359A72 | 00000 | ||
| No. 2 | Standard | 8 1/2" | 3 7/8" | 1/4" | — | Chrome-Plated Steel | Wiha | 5682A94 | 00000 | ||
| No. 2 | Standard | 8 3/4" | 3 15/16" | 1/4" | — | Chrome-Plated Steel | Williams | 7127A52 | 0000 | ||
| No. 3 | Standard | 10 1/4" | 6" | 5/16" | Grooved | Chrome-Plated Steel | Wera | 7359A73 | 00000 | ||
| No. 3 | Standard | 10 5/8" | 5 15/16" | 5/16" | — | Nickel-Plated Steel | Wiha | 5682A53 | 00000 | ||
Precise-Control Screwdrivers
 |
Knurled Grip |
 |
Plain Grip |
Make fine-tuned adjustments on small, delicate components, such as electronics, miniature models, and microscopes. These screwdrivers give you better control than a standard screwdriver to avoid stripping tiny screws or cracking fragile materials. Press the end of the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips. They are also known as precision and miniature screwdrivers.
Knurled Grip—Get the best possible grip, even with wet or oily fingers.
Ceramic—Naturally nonconductive and nonmagnetic, these screwdrivers won't damage electronics or attract loose metal parts in your tool box. They also won't scratch fasteners and other components. Ceramic is brittle, however, so these screwdrivers may crack under high torque.
Screwdrivers | Replacement Tips | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Shaft | |||||||||||
Drive Size | Overall Lg. | Lg. | Overall Wd. | Grip Texture | Grip Style | Each | Each | ||||
Phillips | |||||||||||
Black-Oxide Steel | |||||||||||
| No. 000 | 4" | 1 1/4" | 3/32" | Knurled | Plain | 7026A23 | 000000 | 5341A41 | 00000 | ||
| No. 00 | 4" | 1 1/4" | 3/32" | Knurled | Plain | 7026A22 | 0000 | 5341A42 | 0000 | ||
| No. 0 | 4" | 1 1/4" | 3/32" | Knurled | Plain | 7026A18 | 0000 | 5341A43 | 0000 | ||
| No. 1 | 4" | 1 1/4" | 1/8" | Knurled | Plain | 7026A19 | 00000 | 5341A44 | 0000 | ||
Chrome-Plated Steel | |||||||||||
| No. 000 | 4 3/4" | 1 5/8" | 3/32" | — | Plain | 52985A31 | 0000 | ——— | 0 | ||
| No. 00 | 4 3/4" | 1 5/8" | 3/32" | — | Plain | 52985A17 | 0000 | ——— | 0 | ||
| No. 00 | 6" | 3" | 3/32" | — | Plain | 52985A92 | 0000 | ——— | 0 | ||
| No. 0 | 5 3/4" | 2" | 1/8" | — | Plain | 52985A18 | 0000 | ——— | 0 | ||
| No. 0 | 6 3/4" | 3" | 1/8" | — | Plain | 52985A48 | 0000 | ——— | 0 | ||
| No. 0 | 9 3/4" | 6" | 1/8" | — | Plain | 52985A93 | 0000 | ——— | 0 | ||
| No. 1 | 6 3/4" | 2 3/8" | 5/32" | — | Plain | 52985A19 | 0000 | ——— | 0 | ||
| No. 1 | 7 1/2" | 3 3/16" | 5/32" | — | Plain | 52985A49 | 0000 | ——— | 0 | ||
| No. 1 | 10 1/4" | 5 15/16" | 5/32" | — | Plain | 52985A51 | 0000 | ——— | 0 | ||
Slotted | |||||||||||
Black-Oxide Steel | |||||||||||
| 0.025" | 4" | 1 1/4" | 3/32" | Knurled | Plain | 7026A11 | 0000 | 5341A31 | 0000 | ||
| 0.040" | 4" | 1 1/4" | 3/32" | Knurled | Plain | 7026A12 | 0000 | 5341A32 | 0000 | ||
| 0.055" | 4" | 1 1/4" | 3/32" | Knurled | Plain | 7026A13 | 0000 | 5341A33 | 0000 | ||
| 0.070" | 4" | 1 1/4" | 3/32" | Knurled | Plain | 7026A14 | 0000 | 5341A34 | 0000 | ||
| 0.080" | 4" | 1 1/4" | 3/32" | Knurled | Plain | 7026A15 | 0000 | 5341A35 | 0000 | ||
| 0.100" | 4" | 1 1/4" | 3/32" | Knurled | Plain | 7026A16 | 0000 | 5341A36 | 0000 | ||
| 0.125" | 4" | 1 1/4" | 1/8" | Knurled | Plain | 7026A25 | 0000 | 5341A37 | 0000 | ||
Ceramic | |||||||||||
| 0.035" | 4 1/4" | 5/8" | 1/32" | — | Plain | 5879A21 | 00000 | ——— | 0 | ||
| 0.051" | 4 1/4" | 5/8" | 1/16" | — | Plain | 5879A22 | 00000 | ——— | 0 | ||
| 0.071" | 4 1/4" | 5/8" | 1/16" | — | Plain | 5879A23 | 00000 | ——— | 0 | ||
| 0.102" | 4 1/4" | 5/8" | 1/8" | — | Plain | 5879A24 | 00000 | ——— | 0 | ||
Chrome-Plated Steel | |||||||||||
| 0.031" | 4 3/4" | 1 5/8" | 3/32" | — | Plain | 52985A32 | 0000 | ——— | 0 | ||
| 0.039" | 4 3/4" | 1 5/8" | 3/32" | — | Plain | 52985A33 | 0000 | ——— | 0 | ||
| 0.047" | 4 3/4" | 1 5/8" | 3/32" | — | Plain | 52985A34 | 0000 | ——— | 0 | ||
| 0.063" | 4 3/4" | 1 5/8" | 3/32" | — | Plain | 52985A11 | 0000 | ——— | 0 | ||
| 0.070" | 4 3/4" | 1 5/8" | 3/32" | — | Plain | 52985A35 | 0000 | ——— | 0 | ||
| 0.079" | 4 3/4" | 1 5/8" | 3/32" | — | Plain | 52985A12 | 0000 | ——— | 0 | ||
| 0.079" | 7 1/8" | 3 15/16" | 3/32" | — | Plain | 52985A41 | 0000 | ——— | 0 | ||
| 0.094" | 5 3/4" | 2" | 1/8" | — | Plain | 52985A13 | 0000 | ——— | 0 | ||
| 0.094" | 7 3/4" | 3 15/16" | 1/8" | — | Plain | 52985A42 | 0000 | ——— | 0 | ||
| 0.094" | 9 3/4" | 6" | 3/32" | — | Plain | 52985A91 | 0000 | ——— | 0 | ||
| 0.125" | 5 3/4" | 2" | 1/8" | — | Plain | 52985A14 | 0000 | ——— | 0 | ||
| 0.125" | 8 1/4" | 3 15/16" | 1/8" | — | Plain | 52985A43 | 0000 | ——— | 0 | ||
| 0.125" | 10 1/4" | 5 15/16" | 1/8" | — | Plain | 52985A44 | 0000 | ——— | 0 | ||
| 0.141" | 6 3/4" | 2 3/8" | 1/8" | — | Plain | 52985A15 | 0000 | ——— | 0 | ||
| 0.157" | 6 3/4" | 2 3/8" | 5/32" | — | Plain | 52985A16 | 0000 | ——— | 0 | ||
| 0.157" | 8 1/4" | 3 15/16" | 5/32" | — | Plain | 52985A46 | 0000 | ——— | 0 | ||
| 0.157" | 10 1/4" | 5 15/16" | 5/32" | — | Plain | 52985A47 | 0000 | ——— | 0 | ||
Hex | |||||||||||
Black-Oxide Steel | |||||||||||
| 0.028" | 4" | 1 1/4" | 3/32" | Knurled | Plain | 7043A11 | 0000 | 5341A45 | 0000 | ||
| 0.035" | 4" | 1 1/4" | 3/32" | Knurled | Plain | 7043A12 | 0000 | 5341A46 | 0000 | ||
| 0.050" | 4" | 1 1/4" | 3/32" | Knurled | Plain | 7043A13 | 0000 | 5341A47 | 0000 | ||
| 1/16" | 4" | 1 1/4" | 3/32" | Knurled | Plain | 7043A14 | 0000 | 5341A48 | 0000 | ||
| 5/64" | 4" | 1 1/4" | 3/32" | Knurled | Plain | 7043A15 | 0000 | 5341A49 | 0000 | ||
| 3/32" | 4" | 1 1/4" | 1/8" | Knurled | Plain | 7043A18 | 0000 | 7043A78 | 0000 | ||
| 0.71 mm | 4" | 1 1/4" | 3/32" | Knurled | Plain | 7043A21 | 0000 | 7043A57 | 0000 | ||
| 0.89 mm | 4" | 1 1/4" | 3/32" | Knurled | Plain | 7043A22 | 0000 | 7043A58 | 0000 | ||
| 1.27 mm | 4" | 1 1/4" | 3/32" | Knurled | Plain | 7043A23 | 0000 | 7043A59 | 0000 | ||
| 1.5 mm | 4" | 1 1/4" | 3/32" | Knurled | Plain | 7043A24 | 0000 | 7043A61 | 0000 | ||
| 2 mm | 4" | 1 1/4" | 3/32" | Knurled | Plain | 7043A25 | 0000 | 7043A62 | 0000 | ||
| 2.5 mm | 4" | 1 1/4" | 1/8" | Knurled | Plain | 7043A26 | 0000 | 7043A63 | 0000 | ||
Chrome-Plated Steel | |||||||||||
| 0.028" | 4 3/4" | 1 5/8" | 3/32" | — | Plain | 7270A37 | 0000 | ——— | 0 | ||
| 0.035" | 4 3/4" | 1 5/8" | 3/32" | — | Plain | 7270A38 | 0000 | ——— | 0 | ||
| 0.050" | 4 3/4" | 1 5/8" | 3/32" | — | Plain | 7270A39 | 0000 | ——— | 0 | ||
| 1/16" | 5 3/4" | 2" | 3/32" | — | Plain | 7270A41 | 0000 | ——— | 0 | ||
| 5/64" | 5 3/4" | 2" | 5/64" | — | Plain | 7270A42 | 0000 | ——— | 0 | ||
| 3/32" | 6 3/4" | 2 3/8" | 3/32" | — | Plain | 7270A43 | 0000 | ——— | 0 | ||
| 7/64" | 6 3/4" | 2 3/8" | 7/64" | — | Plain | 7270A44 | 0000 | ——— | 0 | ||
| 1/8" | 6 3/4" | 2 3/8" | 1/8" | — | Plain | 7270A45 | 0000 | ——— | 0 | ||
| 9/64" | 6 3/4" | 2 3/8" | 9/64" | — | Plain | 7270A46 | 0000 | ——— | 0 | ||
| 5/32" | 6 3/4" | 2 3/8" | 5/32" | — | Plain | 7270A47 | 0000 | ——— | 0 | ||
| 1.5 mm | 5 3/4" | 2" | 3/32" | — | Plain | 52975A14 | 0000 | ——— | 0 | ||
| 2.5 mm | 6 3/4" | 2 3/8" | 3/32" | — | Plain | 52975A16 | 0000 | ——— | 0 | ||
| 3 mm | 6 3/4" | 2 3/8" | 1/8" | — | Plain | 52975A17 | 0000 | ——— | 0 | ||
| 4 mm | 6 3/4" | 2 3/8" | 3/16" | — | Plain | 52975A18 | 0000 | ——— | 0 | ||
Torx | |||||||||||
Black-Oxide Steel | |||||||||||
| T1 | 4 15/16" | 1 1/4" | 3/32" | — | Plain | 52995A22 | 00000 | ——— | 0 | ||
| T2 | 4 15/16" | 1 1/4" | 3/32" | — | Plain | 52995A24 | 00000 | ——— | 0 | ||
Chrome-Plated Steel | |||||||||||
| T3 | 4 3/4" | 1 5/8" | 1/8" | — | Plain | 52995A26 | 0000 | ——— | 0 | ||
| T4 | 4 3/4" | 1 5/8" | 1/8" | — | Plain | 52995A27 | 0000 | ——— | 0 | ||
| T5 | 4 3/4" | 1 5/8" | 1/8" | — | Plain | 52995A23 | 0000 | ——— | 0 | ||
| T6 | 4 3/4" | 1 5/8" | 1/8" | — | Plain | 52995A11 | 0000 | ——— | 0 | ||
| T7 | 4 3/4" | 1 5/8" | 1/8" | — | Plain | 52995A12 | 0000 | ——— | 0 | ||
| T8 | 4 3/4" | 1 5/8" | 1/8" | — | Plain | 52995A13 | 0000 | ——— | 0 | ||
| T9 | 5 3/4" | 2" | 1/8" | — | Plain | 52995A14 | 0000 | ——— | 0 | ||
| T10 | 5 3/4" | 2" | 1/8" | — | Plain | 52995A15 | 0000 | ——— | 0 | ||
| T15 | 6 3/4" | 2 3/8" | 1/8" | — | Plain | 52995A16 | 0000 | ——— | 0 | ||
| T20 | 6 3/4" | 2 3/8" | 5/32" | — | Plain | 52995A17 | 0000 | ——— | 0 | ||
Pozidriv® | |||||||||||
Chrome-Plated Steel | |||||||||||
| No. 0 | 5 3/4" | 2" | 1/8" | — | Plain | 2222A12 | 0000 | ——— | 0 | ||
| No. 1 | 6 3/4" | 2 3/8" | 5/32" | — | Plain | 2222A14 | 0000 | ——— | 0 | ||
Cushion-Grip Screwdrivers
 |
Shaft | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Drive Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Material | Mfr. | Each | |||
Phillips | ||||||||||
Premium | ||||||||||
| No. 0 | Standard | 5 3/4" | 3" | 1/8" | Chrome-Plated Steel | Klein Tools | 5720A45 | 00000 | ||
| No. 1 | Standard | 6 3/4" | 3" | 1/8" | Chrome-Plated Steel | Klein Tools | 5720A51 | 00000 | ||
| No. 2 | Stubby | 3 7/16" | 1 1/2" | 1/4" | Chrome-Plated Steel | Klein Tools | 5720A52 | 0000 | ||
| No. 2 | Standard | 8 1/4" | 4" | 1/4" | Chrome-Plated Steel | Klein Tools | 5720A53 | 0000 | ||
| No. 2 | Long | 11 1/4" | 7" | 1/4" | Chrome-Plated Steel | Klein Tools | 5720A46 | 00000 | ||
| No. 2 | Long | 14 1/4" | 10" | 1/4" | Chrome-Plated Steel | Klein Tools | 5720A47 | 00000 | ||
| No. 3 | Standard | 11" | 6" | 5/16" | Chrome-Plated Steel | Klein Tools | 5720A54 | 00000 | ||
Value | ||||||||||
| No. 1 | Standard | 6 3/4" | 3" | 3/16" | Chrome-Plated Steel | — | 5720A41 | 0000 | ||
| No. 2 | Stubby | 3 1/2" | 1 1/2" | 1/4" | Chrome-Plated Steel | — | 5720A39 | 0000 | ||
| No. 2 | Standard | 8 1/2" | 4" | 1/4" | Chrome-Plated Steel | — | 5720A42 | 0000 | ||
| No. 3 | Standard | 11" | 6" | 5/16" | Chrome-Plated Steel | — | 5720A43 | 00000 | ||
Slotted | ||||||||||
Premium | ||||||||||
| 1/16" | Standard | 4 3/4" | 2" | 1/8" | Chrome-Plated Steel | Klein Tools | 5720A17 | 0000 | ||
| 3/32" | Standard | 5 3/4" | 3" | 1/8" | Chrome-Plated Steel | Klein Tools | 5720A18 | 0000 | ||
| 3/32" | Long | 6 3/4" | 4" | 3/32" | Chrome-Plated Steel | Klein Tools | 5720A55 | 0000 | ||
| 1/8" | Standard | 5 3/4" | 3" | 1/8" | Chrome-Plated Steel | Klein Tools | 5720A56 | 0000 | ||
| 1/8" | Long | 6 3/4" | 4" | 1/8" | Chrome-Plated Steel | Klein Tools | 5720A19 | 0000 | ||
| 1/8" | Long | 8 3/4" | 6" | 1/8" | Chrome-Plated Steel | Klein Tools | 5720A57 | 0000 | ||
| 1/8" | Long | 10 3/4" | 8" | 1/8" | Chrome-Plated Steel | Klein Tools | 5720A58 | 00000 | ||
| 1/8" | Long | 12 3/4" | 10" | 1/8" | Chrome-Plated Steel | Klein Tools | 5720A25 | 00000 | ||
| 3/16" | Standard | 6 3/4" | 3" | 3/16" | Chrome-Plated Steel | Klein Tools | 5720A61 | 0000 | ||
| 3/16" | Long | 7 3/4" | 4" | 3/16" | Chrome-Plated Steel | Klein Tools | 5720A62 | 0000 | ||
| 3/16" | Long | 9 3/4" | 6" | 3/16" | Chrome-Plated Steel | Klein Tools | 5720A63 | 00000 | ||
| 3/16" | Long | 11 3/4" | 8" | 3/16" | Chrome-Plated Steel | Klein Tools | 5720A64 | 00000 | ||
| 3/16" | Long | 13 3/4" | 10" | 3/16" | Chrome-Plated Steel | Klein Tools | 5720A24 | 00000 | ||
| 1/4" | Standard | 8 3/8" | 4" | 1/4" | Chrome-Plated Steel | Klein Tools | 5720A65 | 00000 | ||
| 1/4" | Long | 10 1/2" | 6" | 1/4" | Chrome-Plated Steel | Klein Tools | 5720A26 | 00000 | ||
| 1/4" | Long | 12 3/8" | 8" | 1/4" | Chrome-Plated Steel | Klein Tools | 5720A75 | 00000 | ||
| 1/4" | Long | 14 3/8" | 10" | 1/4" | Chrome-Plated Steel | Klein Tools | 5720A76 | 00000 | ||
| 5/16" | Stubby | 3 7/16" | 1 1/2" | 5/16" | Chrome-Plated Steel | Klein Tools | 5720A77 | 0000 | ||
| 5/16" | Standard | 10 15/16" | 6" | 5/16" | Chrome-Plated Steel | Klein Tools | 5720A78 | 00000 | ||
| 3/8" | Standard | 13 7/16" | 8" | 3/8" | Chrome-Plated Steel | Klein Tools | 5720A79 | 00000 | ||
| 3/8" | Long | 15 1/2" | 10" | 3/8" | Chrome-Plated Steel | Klein Tools | 5720A15 | 00000 | ||
| 3/8" | Long | 17 1/2" | 12" | 3/8" | Chrome-Plated Steel | Klein Tools | 5720A16 | 00000 | ||
| 1/2" | Long | 17 1/2" | 12" | 11/16" | Chrome-Plated Steel | Klein Tools | 5720A27 | 00000 | ||
Value | ||||||||||
| 3/16" | Standard | 9 3/4" | 6" | 3/16" | Chrome-Plated Steel | — | 5720A22 | 0000 | ||
| 1/4" | Stubby | 3 1/2" | 1 1/2" | 1/4" | Chrome-Plated Steel | — | 5720A74 | 0000 | ||
| 1/4" | Standard | 8 1/2" | 4" | 1/4" | Chrome-Plated Steel | — | 5720A12 | 0000 | ||
| 5/16" | Standard | 11" | 6" | 5/16" | Chrome-Plated Steel | — | 5720A13 | 0000 | ||
| 3/8" | Standard | 13 1/2" | 8" | 3/8" | Chrome-Plated Steel | — | 5720A14 | 00000 | ||
Hex | ||||||||||
Premium | ||||||||||
| 0.050" | Standard | 4 1/8" | 2 3/8" | 1/16" | Phosphate-Coated Steel | Bondhus | 7400A11 | 0000 | ||
| 1/16" | Standard | 4 11/16" | 2 1/2" | 1/16" | Phosphate-Coated Steel | Bondhus | 7400A12 | 0000 | ||
| 5/64" | Standard | 4 13/16" | 2 5/8" | 3/32" | Phosphate-Coated Steel | Bondhus | 7400A13 | 0000 | ||
| 3/32" | Standard | 5 1/4" | 2 5/8" | 3/32" | Phosphate-Coated Steel | Bondhus | 7400A14 | 0000 | ||
| 7/64" | Standard | 5 3/8" | 3" | 1/8" | Phosphate-Coated Steel | Bondhus | 7400A15 | 0000 | ||
| 1/8" | Standard | 6 5/8" | 3 1/8" | 1/8" | Phosphate-Coated Steel | Bondhus | 7400A16 | 0000 | ||
| 9/64" | Standard | 6 3/4" | 3 1/8" | 1/8" | Phosphate-Coated Steel | Bondhus | 7400A17 | 0000 | ||
| 5/32" | Standard | 7 7/8" | 3 1/2" | 5/32" | Phosphate-Coated Steel | Bondhus | 7400A18 | 0000 | ||
| 3/16" | Standard | 8" | 3 3/4" | 3/16" | Phosphate-Coated Steel | Bondhus | 7400A19 | 0000 | ||
| 7/32" | Standard | 9" | 4 1/4" | 7/32" | Phosphate-Coated Steel | Bondhus | 7400A23 | 0000 | ||
| 1/4" | Standard | 9 1/2" | 4 11/16" | 1/4" | Phosphate-Coated Steel | Bondhus | 7400A24 | 0000 | ||
| 5/16" | Standard | 10 1/2" | 5 5/8" | 5/16" | Phosphate-Coated Steel | Bondhus | 7400A25 | 0000 | ||
| 3/8" | Standard | 11 1/4" | 6 1/2" | 3/8" | Phosphate-Coated Steel | Bondhus | 7400A26 | 0000 | ||
| 1.27 mm | Standard | 4 1/8" | 2 3/8" | 1/16" | Phosphate-Coated Steel | Bondhus | 7400A27 | 0000 | ||
| 1.5 mm | Standard | 4 3/4" | 2 1/2" | 1/16" | Phosphate-Coated Steel | Bondhus | 57585A52 | 0000 | ||
| 2 mm | Standard | 5" | 2 13/16" | 1/16" | Phosphate-Coated Steel | Bondhus | 7400A28 | 0000 | ||
| 2.5 mm | Standard | 5 1/8" | 2 11/16" | 1/8" | Phosphate-Coated Steel | Bondhus | 7400A29 | 0000 | ||
| 3 mm | Standard | 6 3/4" | 3 3/16" | 1/8" | Phosphate-Coated Steel | Bondhus | 7400A31 | 0000 | ||
| 4 mm | Standard | 8 1/16" | 3 11/16" | 3/16" | Phosphate-Coated Steel | Bondhus | 7400A32 | 0000 | ||
| 5 mm | Standard | 8 5/8" | 4 3/8" | 3/16" | Phosphate-Coated Steel | Bondhus | 7400A34 | 0000 | ||
| 6 mm | Standard | 10 1/4" | 5 3/16" | 1/4" | Phosphate-Coated Steel | Bondhus | 7400A35 | 0000 | ||
| 8 mm | Standard | 11 1/4" | 6 3/8" | 5/16" | Phosphate-Coated Steel | Bondhus | 7400A37 | 00000 | ||
| 10 mm | Standard | 12 1/8" | 7 5/16" | 3/8" | Phosphate-Coated Steel | Bondhus | 7400A38 | 00000 | ||
Torx | ||||||||||
Premium | ||||||||||
| T15 | Standard | 8 5/16" | 4" | 5/32" | Chrome-Plated Steel | Klein Tools | 5720A95 | 00000 | ||
| T20 | Standard | 8 5/16" | 4" | 5/32" | Chrome-Plated Steel | Klein Tools | 5720A96 | 00000 | ||
| T25 | Standard | 8 5/16" | 4" | 3/16" | Chrome-Plated Steel | Klein Tools | 5720A97 | 00000 | ||
| T27 | Standard | 8 5/16" | 4" | 7/32" | Chrome-Plated Steel | Klein Tools | 5720A98 | 00000 | ||
| T30 | Standard | 8 5/16" | 4" | 1/4" | Chrome-Plated Steel | Klein Tools | 5720A99 | 00000 | ||
Tamper-Resistant Hex | ||||||||||
Premium | ||||||||||
| 3/32" | Standard | 5 1/4" | 2 13/16" | 3/32" | Phosphate-Coated Steel | Bondhus | 7253A61 | 0000 | ||
| 1/8" | Standard | 6 5/8" | 3 1/8" | 1/8" | Phosphate-Coated Steel | Bondhus | 7253A62 | 0000 | ||
| 5/32" | Standard | 8" | 3 5/8" | 5/32" | Phosphate-Coated Steel | Bondhus | 7253A63 | 0000 | ||
| 3/16" | Standard | 8 1/4" | 3 11/16" | 3/16" | Phosphate-Coated Steel | Bondhus | 7253A64 | 0000 | ||
| 7/32" | Standard | 9 1/4" | 4 3/16" | 7/32" | Phosphate-Coated Steel | Bondhus | 7253A65 | 00000 | ||
| 1/4" | Standard | 9 1/2" | 4 11/16" | 1/4" | Phosphate-Coated Steel | Bondhus | 7253A66 | 00000 | ||
Square | ||||||||||
Premium | ||||||||||
| No. 0 | Standard | 7 3/4" | 4" | 1/8" | Chrome-Plated Steel | Klein Tools | 5720A87 | 00000 | ||
| No. 1 | Standard | 7 3/4" | 4" | 5/32" | Chrome-Plated Steel | Klein Tools | 5720A88 | 00000 | ||
| No. 1 | Long | 11 3/4" | 8" | 3/16" | Chrome-Plated Steel | Klein Tools | 5720A89 | 00000 | ||
| No. 2 | Standard | 8 1/4" | 4" | 3/16" | Chrome-Plated Steel | Klein Tools | 5720A91 | 0000 | ||
| No. 2 | Long | 12 1/4" | 8" | 1/4" | Chrome-Plated Steel | Klein Tools | 5720A92 | 00000 | ||
| No. 3 | Standard | 8 1/4" | 4" | 1/4" | Chrome-Plated Steel | Klein Tools | 5720A93 | 00000 | ||
| No. 3 | Long | 12 1/4" | 8" | 1/4" | Chrome-Plated Steel | Klein Tools | 5720A94 | 00000 | ||
Precise-Control Screwdriver Sets
 |  |
Knurled Grip Texture | Plain Grip |
 | |
Foam Organizers |
Make fine-tuned adjustments on a variety of small, delicate components, such as electronics, miniature models, and microscopes. These screwdriver sets give you better control than a standard screwdriver to avoid stripping tiny screws or cracking fragile materials. Press the end of the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips. They are also known as precision and miniature screwdrivers.
Knurled Grip—Get the best possible grip, even with wet or oily fingers.
Foam Organizers—Keep your tools neat and orderly in drawers, cabinets, and other low-profile spaces. The slots are a different color than the base, so you’ll notice right away if a tool is missing. For a perfect fit, these organizers are laser cut to the exact sizes of the screwdrivers in each set.
Screwdrivers | Foam Organizers | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Pieces | Includes | Grip Texture | Grip Style | Material | Container Type | Each | Each | ||||
Phillips | |||||||||||
| 4 | No. 000 Phillips Screwdriver—4" O'all Lg. No. 00 Phillips Screwdriver—4" O'all Lg. No. 0 Phillips Screwdriver—4" O'all Lg. No. 1 Phillips Screwdriver—4" O'all Lg. | Knurled | Plain | Black-Oxide Steel | Plastic Pouch | 5714A23 | 000000 | ——— | 0 | ||
| 4 | No. 000 Phillips Screwdriver—4 3/4" O'all Lg. No. 00 Phillips Screwdriver—4 3/4" O'all Lg. No. 0 Phillips Screwdriver—5 3/4" O'all Lg. No. 1 Phillips Screwdriver—6 3/4" O'all Lg. | — | Plain | Chrome-Plated Steel | — | 52985A23 | 00000 | ——— | 0 | ||
Slotted | |||||||||||
| 6 | 0.025" Slotted Screwdriver—4" O'all Lg. 0.040" Slotted Screwdriver—4" O'all Lg. 0.055" Slotted Screwdriver—4" O'all Lg. 0.070" Slotted Screwdriver—4" O'all Lg. 0.080" Slotted Screwdriver—4" O'all Lg. 0.100" Slotted Screwdriver—4" O'all Lg. | Knurled | Plain | Black-Oxide Steel | Plastic Pouch | 5714A4 | 00000 | ——— | 0 | ||
| 6 | 0.063" Slotted Screwdriver—4 3/4" O'all Lg. 0.079" Slotted Screwdriver—4 3/4" O'all Lg. 0.098" Slotted Screwdriver—5 3/4" O'all Lg. 0.125" Slotted Screwdriver—5 3/4" O'all Lg. 0.141" Slotted Screwdriver—6 3/4" O'all Lg. 0.157" Slotted Screwdriver—6 3/4" O'all Lg. | — | Plain | Chrome-Plated Steel | — | 52985A21 | 00000 | ——— | 0 | ||
Hex | |||||||||||
| 6 | 0.028" Hex Screwdriver—4" O'all Lg. 0.035" Hex Screwdriver—4" O'all Lg. 0.050" Hex Screwdriver—4" O'all Lg. 1/16" Hex Screwdriver—4" O'all Lg. 5/64" Hex Screwdriver—4" O'all Lg. 3/32" Hex Screwdriver—4" O'all Lg. | Knurled | Plain | Black-Oxide Steel | Plastic Pouch | 7043A17 | 00000 | ——— | 0 | ||
| 6 | 0.71 mm Hex Screwdriver—4" O'all Lg. 0.89 mm Hex Screwdriver—4" O'all Lg. 1.27 mm Hex Screwdriver—4" O'all Lg. 1.5 mm Hex Screwdriver—4" O'all Lg. 2 mm Hex Screwdriver—4" O'all Lg. 2.5 mm Hex Screwdriver—4" O'all Lg. | Knurled | Plain | Black-Oxide Steel | Plastic Pouch | 7043A19 | 00000 | ——— | 0 | ||
| 7 | 0.71 mm Hex Screwdriver—4 3/4" O'all Lg. 0.71 mm Hex Screwdriver—5 9/32" O'all Lg. 0.89 mm Hex Screwdriver—4 3/4" O'all Lg. 1.27 mm Hex Screwdriver—4 3/4" O'all Lg. 2 mm Hex Screwdriver—5 3/4" O'all Lg. 2.5 mm Hex Screwdriver—6 3/4" O'all Lg. 3 mm Hex Screwdriver—6 3/4" O'all Lg. | — | Plain | Chrome-Plated Steel | — | 52975A21 | 00000 | ——— | 0 | ||
| 8 | 0.028" Hex Screwdriver—4 3/4" O'all Lg. 0.035" Hex Screwdriver—4 3/4" O'all Lg. 0.050" Hex Screwdriver—4 3/4" O'all Lg. 1/16" Hex Screwdriver—5 3/4" O'all Lg. 5/64" Hex Screwdriver—5 3/4" O'all Lg. 3/32" Hex Screwdriver—6 3/4" O'all Lg. 7/64" Hex Screwdriver—6 3/4" O'all Lg. 1/8" Hex Screwdriver—6 3/4" O'all Lg. | — | Plain | Chrome-Plated Steel | — | 7270A59 | 00000 | ——— | 0 | ||
Torx | |||||||||||
| 4 | T1 Torx Screwdriver—4 15/16" O'all Lg. T2 Torx Screwdriver—4 15/16" O'all Lg. T3 Torx Screwdriver—4 15/16" O'all Lg. T4 Torx Screwdriver—4 15/16" O'all Lg. | — | Plain | Black-Oxide Steel | Plastic Pouch | 52995A31 | 00000 | ——— | 0 | ||
| 7 | T5 Torx Screwdriver—4 3/4" O'all Lg. T6 Torx Screwdriver—4 3/4" O'all Lg. T7 Torx Screwdriver—4 3/4" O'all Lg. T8 Torx Screwdriver—4 3/4" O'all Lg. T9 Torx Screwdriver—5 3/4" O'all Lg. T10 Torx Screwdriver—5 3/4" O'all Lg. T15 Torx Screwdriver—6 3/4" O'all Lg. | — | Plain | Chrome-Plated Steel | — | 52995A25 | 00000 | ——— | 0 | ||
Phillips and Slotted | |||||||||||
| 7 | 0.063" Slotted Screwdriver—4 3/4" O'all Lg. 0.079" Slotted Screwdriver—5 3/4" O'all Lg. 0.098" Slotted Screwdriver—5 3/4" O'all Lg. 0.118" Slotted Screwdriver—6 3/4" O'all Lg. No. 00 Phillips Screwdriver—4 3/4" O'all Lg. No. 0 Phillips Screwdriver—5 3/4" O'all Lg. No. 1 Phillips Screwdriver—6 3/4" O'all Lg. | — | Plain | Chrome-Plated Steel | — | 52985A22 | 00000 | 2509N2 | 000000 | ||
| 7 | 0.098" Slotted Screwdriver—5 3/4" O'all Lg. 0.098" Slotted Screwdriver—8 1/4" O'all Lg. 0.125" Slotted Screwdriver—8 1/4" O'all Lg. 0.125" Slotted Screwdriver—10 1/4" O'all Lg. 0.157" Slotted Screwdriver—8 1/4" O'all Lg. 0.157" Slotted Screwdriver—10 1/4" O'all Lg. No. 0 Phillips Screwdriver—6 3/4" O'all Lg. | — | Plain | Chrome-Plated Steel | — | 52985A52 | 00000 | ——— | 0 | ||
Phillips, Slotted, Hex, and Torx | |||||||||||
| 50 | 5 3/4" Lg. Chip Lifter Hex Screwdrivers: 0.028", 0.035", 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" Hex Screwdrivers: 1.27 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm Nutdrivers: 1.5 mm, 1.8 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm Phillips Screwdrivers: No. 000, No. 00, No. 0, No. 1 Slotted Screwdrivers: 1/32", 0.039", 3/64", 1/16", 0.070", 5/64", 3/32", 1/8", 9/64", 5/32" Torx Screwdrivers: T1, T2, T3, T4, T5, T6, T7, T8, T9, T10 | — | Plain | Chrome-Plated Steel | Metal Stand | 52985A94 | 000000 | ——— | 0 | ||
Bit Screwdrivers
 |  |  |
Bit Screwdrivers with Bit Storage in Handle | Bit Screwdrivers with Bit Storage in Handle and Removable Shaft | Bit Screwdrivers with Bit Storage in Pouch |
Shaft | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Sizes | Sizes Included | For Bit Hex Shank Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Material | Bit-Holding Mechanism | Mfr. | Each | |||
Bit Screwdrivers with Bit Storage in Handle | |||||||||||||
Premium | |||||||||||||
| 14 | Phillips: No. 0, No. 1, No. 2, No. 3 Slotted: 1/8", 5/32", 11/64", 7/32", 15/64", 1/4" Square: No. 0, No. 1, No. 2, No. 3 | 1/4" | Stubby | 3" | 9/16" | 7/16" | Steel | Ball Detent | Wiha | 7262A64 | 000000 | ||
| 26 | Phillips: No. 0, No. 1, No. 2, No. 3 Slotted: 1/8", 5/32", 11/64", 7/32", 15/64", 1/4" Torx: T6, T7, T8, T9, T10, T15, T20, T25, T27, T30 Square: No. 0, No. 1, No. 2, No. 3 Pozidriv®: No. 1, No. 2 | 1/4" | Standard | 9" | 3 1/2" | 3/8" | Steel | Magnetic Quick-Change Chuck | Wiha | 7253A57 | 00000 | ||
| 26 | Phillips: No. 1, No. 2 Slotted: 5/32", 15/64" Hex: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" Hex: 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm Torx: T8, T9, T10, T15, T20, T25, T27, T30 | 1/4" | Standard | 9" | 3 1/2" | 7/16" | Steel | Magnetic Quick-Change Chuck | Wiha | 7262A65 | 00000 | ||
| 26 | Torq-Set®: No. 6, No. 8, No. 10 Tamper-Resistant Hex: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16" Tamper-Resistant Hex: 2 mm, 2.5 mm, 3 mm, 5 mm Tamper-Resistant Torx: T7, T8, T10, T15, T20, T25, T27, T30, T40 Drilled Spanner: No. 4, No. 6, No. 8, No. 10 | 1/4" | Standard | 8 1/2" | 3 3/8" | 5/16" | Stainless Steel | Magnet | Klein Tools | 7262A49 | 00000 | ||
Bit Screwdrivers with Bit Storage in Handle and Removable Shaft | |||||||||||||
Premium | |||||||||||||
| 6 | Phillips: No. 1, No. 2, No. 3 Slotted: 3/16", 7/32", 1/4" | 1/4" | Standard | 8" | 3 1/4" | 5/8" | Nickel-Plated Steel | Quick-Change Chuck | Wera | 8343A43 | 00000 | ||
Bit Screwdrivers with Bit Storage in Pouch | |||||||||||||
Premium | |||||||||||||
| 10 | Phillips: No. 1, No. 2, No. 3 Tamper-Resistant Torx: T15, T20, T25, T30 Pozidriv®: No. 1, No. 2, No. 3 | 1/4" | Standard | 5 1/2" | 13/16" | 7/16" | Nickel-Plated Steel | Quick-Change Chuck | Wera | 7262A61 | 00000 | ||
| 16 | Phillips: No. 1, No. 2, No. 3 Slotted: 7/32" Hex: 3/32", 1/8", 5/32", 3/16" Tamper-Resistant Torx: T10, T15, T20, T25, T30 Square: No. 1, No. 2, No. 3 | 1/4" | Standard | 5 1/2" | 13/16" | 7/16" | Nickel-Plated Steel | Quick-Change Chuck | Wera | 7262A62 | 00000 | ||
| 32 | Phillips: No. 1, No. 2, No. 3 Slotted: 3/64" Torq-Set®: No. 6, No. 8, No. 10 Tamper-Resistant Hex: 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm Tamper-Resistant Torx: T8, T10, T15, T20, T25, T30, T40, T27 Pozidriv®: No. 1, No. 2; No. 3 Drilled Spanner: No. 4, No. 6, No. 8, No. 10 Tri-Wing®: No. 1, No. 2, No. 3, No. 4 | 1/4" | Standard | 5 1/2" | 13/16" | 7/16" | Nickel-Plated Steel | Quick-Change Chuck | Wera | 7262A63 | 000000 | ||
Electrical Insulating Screwdrivers
 | |
Grooved Tip |
 |  |
Slim Insulated Shaft | Standard Insulated Shaft |
Prevent a dangerous zap if you accidentally touch a live circuit. An insulated handle and shaft absorb up to 1,000 volts of electric shock to meet ASTM, EN, or IEC standards. Use these screwdrivers for everything from installing electrical panels to repairing outlets, switches, and light fixtures.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
Standard Length—The most common screwdriver length for a specific drive size.
Long—An extended shaft turns screws in deep recesses other screwdrivers can't reach.
Slim Insulated Shaft—Insulation built directly into the screwdriver shaft avoids the extra bulk of standard insulation. The slim profile fits into narrow openings and deep recesses, common on terminal blocks and small circuit breakers.
Grooved Tip—Bites into the screw slot for a firm hold, so you can make fast, easy turns without slippage.
Shaft | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Drive Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Insulated Shaft Type | Tip Texture | Material | Mfr. | Specs. Met | Each | |||
Phillips | |||||||||||||
Premium | |||||||||||||
| No. 0 | Standard | 6 3/8" | 3 1/8" | 3/16" | Standard | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A31 | 00000 | ||
| No. 1 | Standard | 7" | 3 1/8" | 3/16" | Slim | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A75 | 00000 | ||
| No. 1 | Standard | 7" | 3 1/8" | 1/4" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A32 | 00000 | ||
| No. 1 | Long | 9 3/4" | 6" | 9/32" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A252 | 00000 | ||
| No. 2 | Standard | 7 13/16" | 4" | 1/4" | Slim | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A253 | 00000 | ||
| No. 2 | Standard | 8 1/4" | 4" | 5/16" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A33 | 00000 | ||
| No. 2 | Long | 12" | 8" | 11/32" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A254 | 00000 | ||
| No. 3 | Standard | 10 1/4" | 6" | 3/8" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A34 | 00000 | ||
| No. 4 | Standard | 12 1/4" | 8" | 15/32" | Standard | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A35 | 00000 | ||
Phillips Terminal Screw | |||||||||||||
Premium | |||||||||||||
| No. 1 | Standard | 7" | 3 1/8" | 1/4" | Slim | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A77 | 00000 | ||
| No. 1 | Standard | 7" | 3 1/8" | 9/32" | Standard | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A255 | 00000 | ||
| No. 2 | Standard | 8 1/16" | 4" | 11/32" | Standard | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A256 | 00000 | ||
| No. 2 | Standard | 8 1/4" | 4" | 5/16" | Slim | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A78 | 00000 | ||
Slotted | |||||||||||||
Premium | |||||||||||||
| 3/32" | Standard | 6 3/8" | 3 1/8" | 5/32" | Standard | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A22 | 0000 | ||
| 1/8" | Standard | 7 1/8" | 4" | 5/32" | Standard | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A23 | 0000 | ||
| 9/64" | Standard | 7 1/8" | 4" | 3/16" | Slim | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A73 | 00000 | ||
| 9/64" | Standard | 7 1/8" | 4" | 9/32" | Standard | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A257 | 0000 | ||
| 5/32" | Standard | 7 13/16" | 4" | 3/16" | Slim | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A258 | 00000 | ||
| 5/32" | Standard | 7 13/16" | 4" | 1/4" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A12 | 0000 | ||
| 5/32" | Long | 9 3/4" | 6" | 9/32" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A259 | 00000 | ||
| 7/32" | Standard | 8 3/4" | 5" | 5/16" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A14 | 00000 | ||
| 7/32" | Standard | 9" | 5" | 1/4" | Slim | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A74 | 00000 | ||
| 7/32" | Long | 11 3/4" | 8" | 11/32" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A261 | 00000 | ||
| 1/4" | Standard | 10" | 6" | 5/16" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A18 | 00000 | ||
| 1/4" | Long | 12" | 8" | 11/32" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A262 | 00000 | ||
| 5/16" | Standard | 11 1/4" | 7" | 3/8" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A13 | 00000 | ||
| 5/16" | Standard | 12 5/16" | 8" | 7/16" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A263 | 00000 | ||
| 3/8" | Standard | 12 1/4" | 8" | 15/32" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A15 | 00000 | ||
Hex | |||||||||||||
Premium | |||||||||||||
| 2.5 mm | Standard | 7" | 3" | 1/4" | Standard | — | Plastic-Coated Steel | Wiha | IEC 60900, EN 60900, ASTM F1505 | 7020A79 | 00000 | ||
| 3 mm | Standard | 7" | 3" | 9/32" | Standard | — | Plastic-Coated Steel | Wiha | IEC 60900, EN 60900, ASTM F1505 | 7020A8 | 00000 | ||
| 4 mm | Standard | 7 1/4" | 3" | 1/4" | Standard | — | Plastic-Coated Steel | Wiha | IEC 60900, EN 60900, ASTM F1505 | 7020A65 | 00000 | ||
| 5 mm | Standard | 7 1/4" | 3" | 9/32" | Standard | — | Plastic-Coated Steel | Wiha | IEC 60900, EN 60900, ASTM F1505 | 7020A66 | 00000 | ||
| 6 mm | Standard | 8 1/2" | 4" | 11/32" | Standard | — | Plastic-Coated Steel | Wiha | IEC 60900, EN 60900, ASTM F1505 | 7020A67 | 00000 | ||
| 8 mm | Standard | 8 3/4" | 4" | 15/32" | Standard | — | Plastic-Coated Steel | Wiha | IEC 60900, EN 60900, ASTM F1505 | 7020A68 | 00000 | ||
Torx | |||||||||||||
Premium | |||||||||||||
| T5 | Standard | 6 5/16" | 3 1/8" | 1/4" | Standard | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A264 | 00000 | ||
| T6 | Standard | 6 5/16" | 3 1/8" | 1/4" | Standard | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A265 | 0000 | ||
| T7 | Standard | 6 5/16" | 3 1/8" | 1/4" | Standard | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A266 | 0000 | ||
| T8 | Standard | 6 5/16" | 3 1/8" | 1/4" | Standard | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A267 | 0000 | ||
| T9 | Standard | 6 5/16" | 3 1/8" | 1/4" | Standard | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A268 | 0000 | ||
| T10 | Standard | 6 5/16" | 3 1/8" | 1/4" | Standard | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A269 | 0000 | ||
| T15 | Standard | 7" | 3 1/8" | 9/32" | Standard | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A271 | 0000 | ||
| T20 | Standard | 7" | 3 1/8" | 9/32" | Standard | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A272 | 0000 | ||
| T25 | Standard | 8 1/16" | 4" | 11/32" | Standard | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A273 | 0000 | ||
| T27 | Standard | 8 1/4" | 4" | 9/32" | Standard | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A58 | 0000 | ||
| T30 | Standard | 8 1/4" | 4" | 5/16" | Standard | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A59 | 00000 | ||
| T40 | Standard | 10 1/2" | 6" | 3/8" | Standard | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A61 | 00000 | ||
Square | |||||||||||||
Premium | |||||||||||||
| No. 1 | Standard | 7" | 3 1/8" | 1/4" | Standard | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A69 | 00000 | ||
| No. 1 | Long | 9 3/4" | 6" | 9/32" | Standard | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A274 | 00000 | ||
| No. 2 | Standard | 8 1/4" | 4" | 5/16" | Standard | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A71 | 00000 | ||
| No. 2 | Long | 12" | 8" | 11/32" | Standard | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A275 | 00000 | ||
| No. 3 | Standard | 10 1/2" | 6" | 3/8" | Standard | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A72 | 00000 | ||
Pozidriv® | |||||||||||||
Premium | |||||||||||||
| No. 0 | Standard | 6 1/4" | 3 1/8" | 3/16" | Standard | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A54 | 0000 | ||
| No. 1 | Standard | 7" | 3 1/8" | 1/4" | Slim | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A55 | 00000 | ||
| No. 1 | Standard | 7" | 3 1/8" | 9/32" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A276 | 00000 | ||
| No. 2 | Standard | 8 1/16" | 4" | 11/32" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A283 | 00000 | ||
| No. 2 | Standard | 8 1/4" | 4" | 5/16" | Slim | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A56 | 00000 | ||
| No. 2 | Long | 12" | 8" | 11/32" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A277 | 00000 | ||
| No. 3 | Standard | 10 1/2" | 6" | 3/8" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A57 | 00000 | ||
| No. 4 | Standard | 12 5/16" | 8" | 15/32" | Standard | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A284 | 00000 | ||
Pozidriv® Terminal Screw | |||||||||||||
Premium | |||||||||||||
| No. 1 | Standard | 7" | 3 1/8" | 9/32" | Standard | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A278 | 00000 | ||
| No. 1 | Standard | 8" | 3 1/8" | 3/16" | Slim | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A279 | 00000 | ||
| No. 2 | Standard | 7" | 4" | 1/4" | Slim | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A282 | 00000 | ||
| No. 2 | Standard | 8 1/16" | 4" | 11/32" | Standard | — | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A281 | 00000 | ||
Cushion-Grip Screwdriver/Nutdrivers
 |  |
6 Sizes | 11 Sizes |
 |
An iconic rubberized grip ensures comfort and control as you turn screws and nuts. These screwdriver/nutdrivers come with reversible bits and shafts to turn multiple fastener sizes. Insert a bit into the shaft to drive screws or use the shaft on its own to fasten nuts. All nest together to store in the body of the tool. Also known as 6-in-1 and 11-in-1 drivers.
Premium—The best screwdrivers available, with handles that keep you comfortable during long stretches of use. They come with high-quality bits that fit snugly into fastener recesses to turn screws quickly without slipping.
Stubby—An extra-short handle and shaft squeeze behind mounted equipment and inside small panels.
Shaft | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Sizes | Sizes Included | For Bit Hex Shank Size | Relative Lg. | Bolt Clearance | Overall Lg. | Lg. | Overall Wd. | Material | Bit-Holding Mechanism | Mfr. | Each | |||
Premium | ||||||||||||||
| 6 | Phillips: No. 1, No. 2 Slotted: 3/16", 1/4" Nutdriver: 1/4", 5/16" | 1/4", 5/16" | Stubby | 3/4" | 3 3/8" | 1 1/4" | 17/32" | Chrome-Plated Steel | Ball Detent | Klein Tools | 6127A42 | 000000 | ||
| 6 | Phillips: No. 1, No. 2 Slotted: 3/16", 1/4" Nutdriver: 1/4", 5/16" | 1/4", 5/16" | Long | 2 1/8" | 9 1/8" | 4 1/8" | 7/16" | Chrome-Plated Steel | Ball Detent | Klein Tools | 9830N11 | 00000 | ||
| 11 | Phillips: No. 1, No. 2 Slotted: 3/16", 1/4" Torx: T10, T15 Square: No. 1, No. 2 Nutdriver: 1/4", 5/16", 3/8" | 1/4", 5/16" | Standard | 1 3/4" | 7" | 2 1/2" | 17/32" | Chrome-Plated Steel | Ball Detent | Klein Tools | 6127A41 | 00000 | ||
Screwdrivers for Stainless Steel Screws
 | |
Grooved Tip |
Shaft | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Drive Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Tip Texture | Material | Mfr. | Each | |||
Phillips | |||||||||||
Premium | |||||||||||
| No. 0 | Standard | 5 9/16" | 2 3/8" | 1/8" | — | Stainless Steel | Wera | 56405A51 | 000000 | ||
| No. 1 | Standard | 7" | 3 1/8" | 3/16" | Grooved | Stainless Steel | Wera | 56405A52 | 00000 | ||
| No. 2 | Standard | 8 1/4" | 4" | 1/4" | Grooved | Stainless Steel | Wera | 56405A53 | 00000 | ||
| No. 3 | Standard | 10 1/2" | 6" | 5/16" | Grooved | Stainless Steel | Wera | 56405A57 | 00000 | ||
Slotted | |||||||||||
Premium | |||||||||||
| 1/8" | Standard | 6 3/8" | 3 1/8" | 1/8" | — | Stainless Steel | Wera | 56405A41 | 00000 | ||
| 9/64" | Standard | 7 1/8" | 4" | 5/32" | — | Stainless Steel | Wera | 56405A111 | 00000 | ||
| 5/32" | Standard | 8" | 4" | 5/32" | Grooved | Stainless Steel | Wera | 56405A63 | 00000 | ||
| 7/32" | Standard | 8 3/4" | 5" | 7/32" | Grooved | Stainless Steel | Wera | 56405A62 | 00000 | ||
| 1/4" | Standard | 10" | 6" | 1/4" | Grooved | Stainless Steel | Wera | 56405A44 | 00000 | ||
| 5/16" | Standard | 11 1/4" | 7" | 5/16" | Grooved | Stainless Steel | Wera | 56405A45 | 00000 | ||
| 3/8" | Standard | 12 1/2" | 8" | 3/8" | Grooved | Stainless Steel | Wera | 56405A56 | 00000 | ||
Torx | |||||||||||
Premium | |||||||||||
| T8 | Standard | 5 1/2" | 2 3/8" | 5/32" | — | Stainless Steel | Wera | 56405A11 | 00000 | ||
| T9 | Standard | 5 1/2" | 2 3/8" | 5/32" | — | Stainless Steel | Wera | 56405A12 | 00000 | ||
| T10 | Standard | 6 1/4" | 3 1/8" | 5/32" | — | Stainless Steel | Wera | 56405A13 | 00000 | ||
| T15 | Standard | 7" | 3 1/8" | 5/32" | — | Stainless Steel | Wera | 56405A14 | 00000 | ||
| T20 | Standard | 7 7/8" | 4" | 3/16" | — | Stainless Steel | Wera | 56405A15 | 00000 | ||
| T25 | Standard | 8 1/4" | 4" | 7/32" | — | Stainless Steel | Wera | 56405A16 | 00000 | ||
| T27 | Standard | 8 3/4" | 4 9/16" | 7/32" | — | Stainless Steel | Wera | 56405A17 | 00000 | ||
| T30 | Standard | 8 3/4" | 4 9/16" | 1/4" | — | Stainless Steel | Wera | 56405A18 | 00000 | ||
| T40 | Standard | 9 3/4" | 5 3/16" | 9/32" | — | Stainless Steel | Wera | 56405A19 | 00000 | ||
Square | |||||||||||
Premium | |||||||||||
| No. 1 | Standard | 7" | 3 1/8" | 3/16" | — | Stainless Steel | Wera | 56405A2 | 00000 | ||
| No. 2 | Standard | 8 1/4" | 4" | 1/4" | — | Stainless Steel | Wera | 56405A21 | 00000 | ||
Pozidriv® | |||||||||||
Premium | |||||||||||
| No. 0 | Standard | 5 9/16" | 2 3/8" | 1/8" | — | Stainless Steel | Wera | 56405A112 | 00000 | ||
| No. 1 | Standard | 7" | 3 1/8" | 3/16" | Grooved | Stainless Steel | Wera | 56405A113 | 00000 | ||
| No. 2 | Standard | 8 1/8" | 4" | 1/4" | Grooved | Stainless Steel | Wera | 56405A114 | 00000 | ||
| No. 3 | Standard | 10 5/16" | 6" | 5/16" | Grooved | Stainless Steel | Wera | 56405A115 | 00000 | ||
Plain-Grip Screwdriver Sets
 | |
Foam Organizers |
Ideal for industrial maintenance, these no-frills screwdriver sets withstand years of heavy use in the shop and on the jobsite. The hard plastic handles won't crack or wear out from drops and scrapes. They're also easy to wipe down and won't get sticky or gummy when exposed to oils or chemicals, unlike soft handles.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
Foam Organizers—Keep your tools neat and orderly in drawers, cabinets, and other low-profile spaces. The slots are a different color than the base, so you’ll notice right away if a tool is missing. For a perfect fit, these organizers are laser cut to the exact sizes of the screwdrivers in each set.
Screwdrivers | Foam Organizers | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
No. of Pieces | Includes | Material | Mfr. | Container Type | Each | Each | ||||
Phillips | ||||||||||
Premium | ||||||||||
| 5 | No. 0 Phillips Screwdriver—6 3/4" O'all Lg. No. 1 Phillips Screwdriver—6 3/4" O'all Lg. No. 2 Phillips Screwdriver—3 1/2" O'all Lg. No. 2 Phillips Screwdriver—8 1/4" O'all Lg. No. 3 Phillips Screwdriver—10 3/4" O'all Lg. | Black-Oxide Steel | Mayhew | — | 8551A48 | 000000 | ——— | 0 | ||
Slotted | ||||||||||
Premium | ||||||||||
| 5 | 1/8" Slotted Screwdriver—4 3/4" O'all Lg. 3/16" Slotted Screwdriver—9 3/4" O'all Lg. 1/4" Slotted Screwdriver—3 1/2" O'all Lg. 1/4" Slotted Screwdriver—8 1/4" O'all Lg. 5/16" Slotted Screwdriver—10 3/4" O'all Lg. | Black-Oxide Steel | Mayhew | — | 8551A51 | 00000 | ——— | 0 | ||
| 7 | 1/8" Slotted Screwdriver—6 3/4" O'all Lg. 3/16" Slotted Screwdriver—3 1/2" O'all Lg. 3/16" Slotted Screwdriver—6 3/4" O'all Lg. 1/4" Slotted Screwdriver—3 1/2" O'all Lg. 1/4" Slotted Screwdriver—8 1/4" O'all Lg. 5/16" Slotted Screwdriver—10 3/4" O'all Lg. 3/8" Slotted Screwdriver—13 1/4" O'all Lg. | Black-Oxide Steel | Mayhew | — | 8551A52 | 00000 | ——— | 0 | ||
Torx | ||||||||||
Premium | ||||||||||
| 6 | T6 Torx Screwdriver—4 1/2" O'all Lg. T7 Torx Screwdriver—4 1/2" O'all Lg. T8 Torx Screwdriver—5" O'all Lg. T9 Torx Screwdriver—5" O'all Lg. T10 Torx Screwdriver—5 1/2" O'all Lg. T15 Torx Screwdriver—7" O'all Lg. | Black-Oxide Steel | Mayhew | Fabric Roll-Up Pouch | 5756A92 | 00000 | ——— | 0 | ||
| 6 | T10 Torx Screwdriver—5 1/2" O'all Lg. T15 Torx Screwdriver—7" O'all Lg. T20 Torx Screwdriver—7" O'all Lg. T25 Torx Screwdriver—8" O'all Lg. T27 Torx Screwdriver—8" O'all Lg. T30 Torx Screwdriver—8" O'all Lg. | Black-Oxide Steel | Mayhew | Fabric Roll-Up Pouch | 5756A45 | 00000 | ——— | 0 | ||
| 10 | T6 Torx Screwdriver—4 1/2" O'all Lg. T7 Torx Screwdriver—4 1/2" O'all Lg. T8 Torx Screwdriver—5" O'all Lg. T9 Torx Screwdriver—5" O'all Lg. T10 Torx Screwdriver—5 1/2" O'all Lg. T15 Torx Screwdriver—7" O'all Lg. T20 Torx Screwdriver—7" O'all Lg. T25 Torx Screwdriver—8" O'all Lg. T27 Torx Screwdriver—8" O'all Lg. T30 Torx Screwdriver—8" O'all Lg. | Black-Oxide Steel | Mayhew | Fabric Roll-Up Pouch | 5756A91 | 00000 | ——— | 0 | ||
| 13 | T6 Torx Screwdriver—4 1/2" O'all Lg. T7 Torx Screwdriver—4 1/2" O'all Lg. T8 Torx Screwdriver—5" O'all Lg. T9 Torx Screwdriver—5" O'all Lg. T10 Torx Screwdriver—5 1/2" O'all Lg. T15 Torx Screwdriver—7" O'all Lg. T20 Torx Screwdriver—7" O'all Lg. T25 Torx Screwdriver—8" O'all Lg. T27 Torx Screwdriver—8" O'all Lg. T30 Torx Screwdriver—8" O'all Lg. T40 Torx Screwdriver—10 1/8" O'all Lg. T45 Torx Screwdriver—10 1/8" O'all Lg. T50 Torx Screwdriver—10 1/8" O'all Lg. | Black-Oxide Steel | Mayhew | Fabric Roll-Up Pouch | 5756A71 | 000000 | ——— | 0 | ||
Drilled Spanner | ||||||||||
Premium | ||||||||||
| 3 | No. 6 Drilled Spanner Screwdriver (for 1/8" Ctr.-to-Ctr.)—8" O'all Lg. No. 8 Drilled Spanner Screwdriver (for 5/32" Ctr.-to-Ctr.)—8" O'all Lg. No. 10 Drilled Spanner Screwdriver (for 3/16" Ctr.-to-Ctr.)—8" O'all Lg. | Steel | Allegheny Bolt & Screw | Plastic Pouch | 94062A121 | 00000 | ——— | 0 | ||
| 4 | No. 6 Drilled Spanner Screwdriver (for 1/8" Ctr.-to-Ctr.)—8" O'all Lg. No. 8 Drilled Spanner Screwdriver (for 5/32" Ctr.-to-Ctr.)—8" O'all Lg. No. 10 Drilled Spanner Screwdriver (for 3/16" Ctr.-to-Ctr.)—8" O'all Lg. No. 14 Drilled Spanner Screwdriver (for 7/32" Ctr.-to-Ctr.)—8" O'all Lg. | Steel | Allegheny Bolt & Screw | — | 94062A710 | 00000 | ——— | 0 | ||
Phillips and Slotted | ||||||||||
Premium | ||||||||||
| 6 | 3/16" Slotted Screwdriver—6 3/4" O'all Lg. 3/16" Slotted Screwdriver—9 3/4" O'all Lg. 1/4" Slotted Screwdriver—8 1/4" O'all Lg. 5/16" Slotted Screwdriver—10 3/4" O'all Lg. No. 1 Phillips Screwdriver—6 3/4" O'all Lg. No. 2 Phillips Screwdriver—8 1/4" O'all Lg. | Black-Oxide Steel | Mayhew | — | 8551A26 | 00000 | 2509N1 | 000000 | ||
| 10 | 1/8" Slotted Screwdriver—4 3/4" O'all Lg. 3/16" Slotted Screwdriver—9 3/4" O'all Lg. 1/4" Slotted Screwdriver—3 1/2" O'all Lg. 1/4" Slotted Screwdriver—8 1/4" O'all Lg. 5/16" Slotted Screwdriver—10 3/4" O'all Lg. 3/8" Slotted Screwdriver—13 1/4" O'all Lg. No. 1 Phillips Screwdriver—6 3/4" O'all Lg. No. 2 Phillips Screwdriver—3 1/2" O'all Lg. No. 2 Phillips Screwdriver—8 1/4" O'all Lg. No. 3 Phillips Screwdriver—10 3/4" O'all Lg. | Black-Oxide Steel | Mayhew | — | 8551A83 | 00000 | ——— | 0 | ||
| 14 | 1/8" Slotted Screwdriver—5 1/4" O'all Lg. 1/8" Slotted Screwdriver—6 3/4" O'all Lg. 3/16" Slotted Screwdriver—7 3/4" O'all Lg. 3/16" Slotted Screwdriver—9 3/4" O'all Lg. 3/16" Slotted Screwdriver—12 3/4" O'all Lg. 1/4" Slotted Screwdriver—3 1/2" O'all Lg. 1/4" Slotted Screwdriver—8 1/4" O'all Lg. 1/4" Slotted Screwdriver—10 1/4" O'all Lg. No. 0 Phillips Screwdriver—5 1/4" O'all Lg. No. 1 Phillips Screwdriver—6 3/4" O'all Lg. No. 2 Phillips Screwdriver—3 1/2" O'all Lg. No. 2 Phillips Screwdriver—8 1/4" O'all Lg. No. 2 Phillips Screwdriver—10 1/4" O'all Lg. No. 2 Phillips Screwdriver—12 1/4" O'all Lg. | Black-Oxide Steel | Mayhew | — | 8551A71 | 00000 | ——— | 0 | ||
Screwdriver Sets
 |
Keep a selection of screwdrivers on hand to turn fasteners of any size. The handles are made from a combination of soft, grippy plastic for high torque and smooth, hard plastic for quick grip adjustments and high-speed turning. They're also contoured to maximize comfort and minimize hand strain, fatigue, and blisters, even with extended use.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
No. of Pieces | Includes | Material | Mfr. | Container Type | Each | |||
|---|---|---|---|---|---|---|---|---|
Tamper-Resistant Torx | ||||||||
Premium | ||||||||
| 6 | T10 Tamper-Resistant Torx Screwdriver—6 1/2" O'all Lg. T15 Tamper-Resistant Torx Screwdriver—7" O'all Lg. T20 Tamper-Resistant Torx Screwdriver—7 3/4" O'all Lg. T25 Tamper-Resistant Torx Screwdriver—8" O'all Lg. T30 Tamper-Resistant Torx Screwdriver—8 3/4" O'all Lg. T40 Tamper-Resistant Torx Screwdriver—9 3/4" O'all Lg. | Steel | Wera | Plastic Rack | 83335A71 | 000000 | ||
Torx Plus | ||||||||
Premium | ||||||||
| 7 | IP8 Torx Plus Screwdriver—6 3/4" O'all Lg. IP10 Torx Plus Screwdriver—7 1/2" O'all Lg. IP15 Torx Plus Screwdriver—7 1/2" O'all Lg. IP20 Torx Plus Screwdriver—8 1/4" O'all Lg. IP25 Torx Plus Screwdriver—8 1/4" O'all Lg. IP30 Torx Plus Screwdriver—9 1/4" O'all Lg. IP40 Torx Plus Screwdriver—10" O'all Lg. | Chrome-Plated Steel | Wiha | — | 5259A31 | 00000 | ||
Square | ||||||||
Premium | ||||||||
| 4 | No. 0 Square Screwdriver—7 1/2" O'all Lg. No. 1 Square Screwdriver—8 1/4" O'all Lg. No. 2 Square Screwdriver—10 1/2" O'all Lg. No. 3 Square Screwdriver—10 1/2" O'all Lg. | Chrome-Plated Steel | Wiha | — | 5830A15 | 00000 | ||
JIS | ||||||||
Premium | ||||||||
| 3 | No. 1 JIS Screwdriver—7 5/16" O'all Lg. No. 2 JIS Screwdriver—8 1/4" O'all Lg. No. 3 JIS Screwdriver—11" O'all Lg. | Chrome-Plated Steel | Vessel | — | 53325A61 | 00000 | ||
Phillips and Slotted | ||||||||
Premium | ||||||||
| 6 | 9/64" Slotted Screwdriver—6 3/16" O'all Lg. 5/32" Slotted Screwdriver—6 3/4" O'all Lg. 7/32" Slotted Screwdriver—7 13/16" O'all Lg. 1/4" Slotted Screwdriver—9" O'all Lg. No. 1 Phillips Screwdriver—7" O'all Lg. No. 2 Phillips Screwdriver—8" O'all Lg. | Chrome-Plated Steel | Wera | Plastic Rack | 7359A81 | 00000 | ||
Ball-Tip Screwdrivers
 |
 |
Turn screws even when you can't access them head on. These screwdrivers are handy in corners and underneath machinery because their ball tip can engage fasteners at an angle. While they're great for most fastening jobs, the tip makes less contact with fastener recesses than standard, straight tips and may snap off under extremely high torque.
The handle on these drivers has a rubberized, cushioned grip over a hard plastic core for comfort and control.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
Standard Length—The most common screwdriver length for a specific drive size.
Long—An extended shaft turns screws in deep recesses other screwdrivers can't reach.
Shaft | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Drive Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Max. Access Angle | Material | Mfr. | Each | |||
Hex | |||||||||||
Premium | |||||||||||
| 0.050" | Standard | 4 1/8" | 2 7/16" | 1/16" | 25° | Phosphate-Coated Steel | Bondhus | 5497A22 | 00000 | ||
| 0.050" | Long | 5 3/8" | 3 5/8" | 1/16" | 25° | Phosphate-Coated Steel | Bondhus | 5497A19 | 0000 | ||
| 1/16" | Standard | 4 3/4" | 2 1/2" | 1/16" | 25° | Phosphate-Coated Steel | Bondhus | 5497A23 | 0000 | ||
| 1/16" | Long | 6" | 3 13/16" | 1/16" | 25° | Phosphate-Coated Steel | Bondhus | 5497A21 | 0000 | ||
| 5/64" | Standard | 4 13/16" | 2 5/8" | 3/32" | 25° | Phosphate-Coated Steel | Bondhus | 5497A24 | 0000 | ||
| 5/64" | Long | 6 1/2" | 4 5/16" | 3/32" | 25° | Phosphate-Coated Steel | Bondhus | 5497A68 | 0000 | ||
| 3/32" | Standard | 5 1/4" | 2 13/16" | 3/32" | 25° | Phosphate-Coated Steel | Bondhus | 5497A25 | 0000 | ||
| 3/32" | Long | 7 1/4" | 4 13/16" | 3/32" | 25° | Phosphate-Coated Steel | Bondhus | 5497A69 | 0000 | ||
| 7/64" | Standard | 5 5/16" | 2 15/16" | 1/8" | 25° | Phosphate-Coated Steel | Bondhus | 5497A26 | 0000 | ||
| 7/64" | Long | 8 1/2" | 5 15/16" | 1/8" | 25° | Phosphate-Coated Steel | Bondhus | 5497A38 | 0000 | ||
| 1/8" | Standard | 6 5/8" | 3 1/8" | 1/8" | 25° | Phosphate-Coated Steel | Bondhus | 5497A27 | 0000 | ||
| 1/8" | Long | 10" | 6 7/16" | 1/8" | 25° | Phosphate-Coated Steel | Bondhus | 5497A39 | 0000 | ||
| 9/64" | Standard | 6 13/16" | 3 5/16" | 1/8" | 25° | Phosphate-Coated Steel | Bondhus | 5497A28 | 0000 | ||
| 9/64" | Long | 10 1/2" | 6 15/16" | 1/8" | 25° | Phosphate-Coated Steel | Bondhus | 5497A41 | 0000 | ||
| 5/32" | Standard | 7 15/16" | 3 5/8" | 5/32" | 25° | Phosphate-Coated Steel | Bondhus | 5497A29 | 0000 | ||
| 5/32" | Long | 11 3/4" | 7 7/16" | 5/32" | 25° | Phosphate-Coated Steel | Bondhus | 5497A42 | 0000 | ||
| 3/16" | Standard | 8" | 3 3/4" | 3/16" | 25° | Phosphate-Coated Steel | Bondhus | 5497A31 | 0000 | ||
| 3/16" | Long | 12 1/4" | 7 15/16" | 3/16" | 25° | Phosphate-Coated Steel | Bondhus | 5497A43 | 0000 | ||
| 7/32" | Standard | 9" | 4 1/4" | 7/32" | 25° | Phosphate-Coated Steel | Bondhus | 5497A32 | 0000 | ||
| 1/4" | Standard | 9 3/4" | 5" | 1/4" | 25° | Phosphate-Coated Steel | Bondhus | 5497A33 | 0000 | ||
| 1/4" | Long | 13 3/4" | 9" | 1/4" | 25° | Phosphate-Coated Steel | Bondhus | 5497A45 | 0000 | ||
| 5/16" | Standard | 10 1/2" | 5 5/8" | 5/16" | 25° | Phosphate-Coated Steel | Bondhus | 5497A34 | 0000 | ||
| 5/16" | Long | 14 1/4" | 9 1/2" | 5/16" | 25° | Phosphate-Coated Steel | Bondhus | 5497A46 | 0000 | ||
| 3/8" | Standard | 11 1/4" | 6 1/2" | 3/8" | 25° | Phosphate-Coated Steel | Bondhus | 5497A35 | 0000 | ||
| 7/16" | Standard | 12 1/2" | 7 5/8" | 7/16" | 25° | Phosphate-Coated Steel | Bondhus | 5497A15 | 00000 | ||
| 1/2" | Standard | 13 1/2" | 8 3/4" | 1/2" | 25° | Phosphate-Coated Steel | Bondhus | 5497A16 | 00000 | ||
| 1.27 mm | Standard | 4 1/8" | 2 7/16" | 1/16" | 25° | Phosphate-Coated Steel | Bondhus | 5497A49 | 0000 | ||
| 1.27 mm | Long | 5 3/8" | 3 5/8" | 1/16" | 25° | Phosphate-Coated Steel | Bondhus | 5497A47 | 0000 | ||
| 1.5 mm | Standard | 4 3/4" | 2 5/8" | 1/16" | 25° | Phosphate-Coated Steel | Bondhus | 5497A51 | 0000 | ||
| 1.5 mm | Long | 5 15/16" | 3 13/16" | 1/16" | 25° | Phosphate-Coated Steel | Bondhus | 5497A48 | 0000 | ||
| 2 mm | Standard | 5" | 2 13/16" | 3/32" | 25° | Phosphate-Coated Steel | Bondhus | 5497A52 | 0000 | ||
| 2 mm | Long | 6 1/4" | 4" | 3/32" | 25° | Phosphate-Coated Steel | Bondhus | 5497A67 | 0000 | ||
| 2.5 mm | Standard | 5 1/8" | 2 3/4" | 3/32" | 25° | Phosphate-Coated Steel | Bondhus | 5497A53 | 0000 | ||
| 2.5 mm | Long | 6 3/4" | 4 5/16" | 3/32" | 25° | Phosphate-Coated Steel | Bondhus | 5497A72 | 0000 | ||
| 3 mm | Standard | 6 3/4" | 3 5/16" | 1/8" | 25° | Phosphate-Coated Steel | Bondhus | 5497A54 | 0000 | ||
| 3 mm | Long | 9 3/4" | 6 1/4" | 1/8" | 25° | Phosphate-Coated Steel | Bondhus | 5497A73 | 0000 | ||
| 3.5 mm | Standard | 6 15/16" | 3 1/2" | 1/8" | 25° | Phosphate-Coated Steel | Bondhus | 5497A55 | 0000 | ||
| 3.5 mm | Long | 10" | 6 7/16" | 1/8" | 25° | Phosphate-Coated Steel | Bondhus | 5497A66 | 0000 | ||
| 4 mm | Standard | 8 1/4" | 3 3/4" | 5/32" | 25° | Phosphate-Coated Steel | Bondhus | 5497A56 | 0000 | ||
| 4 mm | Long | 11 1/2" | 7" | 5/32" | 25° | Phosphate-Coated Steel | Bondhus | 5497A74 | 0000 | ||
| 4.5 mm | Standard | 8 3/4" | 4 5/16" | 3/16" | 25° | Phosphate-Coated Steel | Bondhus | 5497A11 | 0000 | ||
| 5 mm | Standard | 8 3/4" | 4 5/16" | 3/16" | 25° | Phosphate-Coated Steel | Bondhus | 5497A58 | 0000 | ||
| 5 mm | Long | 12 1/4" | 7 13/16" | 3/16" | 25° | Phosphate-Coated Steel | Bondhus | 5497A75 | 0000 | ||
| 5.5 mm | Standard | 4 5/16" | 5" | 7/32" | 25° | Phosphate-Coated Steel | Bondhus | 5497A12 | 0000 | ||
| 6 mm | Standard | 10 1/4" | 5 7/16" | 1/4" | 25° | Phosphate-Coated Steel | Bondhus | 5497A61 | 0000 | ||
| 6 mm | Long | 13 1/2" | 8 3/4" | 1/4" | 25° | Phosphate-Coated Steel | Bondhus | 5497A76 | 0000 | ||
| 7 mm | Standard | 10 1/2" | 5 11/16" | 9/32" | 25° | Phosphate-Coated Steel | Bondhus | 5497A13 | 0000 | ||
| 8 mm | Standard | 11 1/4" | 6 7/16" | 5/16" | 25° | Phosphate-Coated Steel | Bondhus | 5497A63 | 0000 | ||
| 8 mm | Long | 14 1/4" | 9 1/4" | 5/16" | 25° | Phosphate-Coated Steel | Bondhus | 5497A77 | 0000 | ||
| 9 mm | Standard | 5 11/16" | 7" | 3/8" | 25° | Phosphate-Coated Steel | Bondhus | 5497A14 | 00000 | ||
| 10 mm | Standard | 12 1/4" | 7 5/16" | 3/8" | 25° | Phosphate-Coated Steel | Bondhus | 5497A65 | 0000 | ||
| 10 mm | Long | 15" | 10 1/4" | 3/8" | 25° | Phosphate-Coated Steel | Bondhus | 5497A78 | 00000 | ||
Torx | |||||||||||
Premium | |||||||||||
| T6 | Standard | 4 3/4" | 2 5/8" | 1/16" | 20° | Phosphate-Coated Steel | Bondhus | 37455A34 | 0000 | ||
| T7 | Standard | 4 3/4" | 2 5/8" | 3/32" | 20° | Phosphate-Coated Steel | Bondhus | 37455A35 | 0000 | ||
| T8 | Standard | 5" | 2 5/8" | 3/32" | 20° | Phosphate-Coated Steel | Bondhus | 37455A36 | 0000 | ||
| T9 | Standard | 5" | 2 5/8" | 3/32" | 20° | Phosphate-Coated Steel | Bondhus | 37455A21 | 0000 | ||
| T10 | Standard | 5 1/4" | 2 13/16" | 1/8" | 20° | Phosphate-Coated Steel | Bondhus | 37455A22 | 0000 | ||
| T15 | Standard | 6 7/16" | 2 15/16" | 1/8" | 20° | Phosphate-Coated Steel | Bondhus | 37455A23 | 0000 | ||
| T20 | Standard | 7 1/2" | 3 1/4" | 5/32" | 20° | Phosphate-Coated Steel | Bondhus | 37455A24 | 0000 | ||
| T25 | Standard | 7 3/4" | 3 7/16" | 3/16" | 20° | Phosphate-Coated Steel | Bondhus | 37455A25 | 0000 | ||
| T27 | Standard | 8 3/4" | 3 13/16" | 3/16" | 20° | Phosphate-Coated Steel | Bondhus | 37455A26 | 0000 | ||
| T30 | Standard | 9" | 4 1/4" | 7/32" | 20° | Phosphate-Coated Steel | Bondhus | 37455A27 | 0000 | ||
| T40 | Standard | 9 1/2" | 4 5/8" | 1/4" | 20° | Phosphate-Coated Steel | Bondhus | 37455A28 | 00000 | ||
| T45 | Standard | 10" | 5 1/4" | 5/16" | 20° | Phosphate-Coated Steel | Bondhus | 37455A29 | 00000 | ||
| T50 | Standard | 11" | 6" | 11/32" | 20° | Phosphate-Coated Steel | Bondhus | 37455A31 | 00000 | ||
| T55 | Standard | 11 3/4" | 6 13/16" | 7/16" | 20° | Phosphate-Coated Steel | Bondhus | 37455A32 | 00000 | ||
Square | |||||||||||
Premium | |||||||||||
| No. 0 | Standard | 7" | 3 1/2" | 1/8" | 25° | Phosphate-Coated Steel | Bondhus | 53315A11 | 0000 | ||
| No. 1 | Standard | 7 1/4" | 3 13/16" | 3/16" | 25° | Phosphate-Coated Steel | Bondhus | 53315A12 | 0000 | ||
| No. 2 | Standard | 8 1/4" | 4" | 3/16" | 25° | Phosphate-Coated Steel | Bondhus | 53315A13 | 0000 | ||
| No. 3 | Standard | 8 1/4" | 4" | 3/16" | 25° | Phosphate-Coated Steel | Bondhus | 53315A14 | 0000 | ||
| No. 4 | Standard | 8 7/8" | 4 1/2" | 3/16" | 25° | Phosphate-Coated Steel | Bondhus | 53315A15 | 0000 | ||
Cushion-Grip Screwdriver Sets
 |
Turn screws of various sizes with these iconic drivers. A rubberized, cushioned grip over a hard plastic core gives you comfort and control.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
Value—We tested tools from dozens of manufacturers to offer near-premium quality at a fraction of the cost.
No. of Pieces | Includes | Material | Mfr. | Container Type | Each | |||
|---|---|---|---|---|---|---|---|---|
Hex | ||||||||
Premium | ||||||||
| 6 | 0.050" Hex Screwdriver—4 13/16" O'all Lg. 1/16" Hex Screwdriver—5" O'all Lg. 5/64" Hex Screwdriver—5" O'all Lg. 3/32" Hex Screwdriver—6 1/4" O'all Lg. 1/8" Hex Screwdriver—6 1/2" O'all Lg. 5/32" Hex Screwdriver—8" O'all Lg. | Phosphate-Coated Steel | Bondhus | Plastic Pouch | 7400A36 | 000000 | ||
| 8 | 1.27 mm Hex Screwdriver—6 5/8" O'all Lg. 1.5 mm Hex Screwdriver—6 5/8" O'all Lg. 2 mm Hex Screwdriver—6 5/8" O'all Lg. 2.5 mm Hex Screwdriver—7 1/8" O'all Lg. 3 mm Hex Screwdriver—7 1/8" O'all Lg. 4 mm Hex Screwdriver—7 1/8" O'all Lg. 5 mm Hex Screwdriver—7 1/8" O'all Lg. 6 mm Hex Screwdriver—7 1/8" O'all Lg. | Phosphate-Coated Steel | Bondhus | Plastic Pouch | 57585A61 | 00000 | ||
| 11 | 0.050" Hex Screwdriver—4 1/8" O'all Lg. 1/16" Hex Screwdriver—4 3/4" O'all Lg. 5/64" Hex Screwdriver—4 7/8" O'all Lg. 3/32" Hex Screwdriver—5 1/4" O'all Lg. 7/64" Hex Screwdriver—5 3/8" O'all Lg. 1/8" Hex Screwdriver—6 5/8" O'all Lg. 9/64" Hex Screwdriver—6 3/4" O'all Lg. 5/32" Hex Screwdriver—8" O'all Lg. 3/16" Hex Screwdriver—8 1/4" O'all Lg. 7/32" Hex Screwdriver—9 1/4" O'all Lg. 1/4" Hex Screwdriver—9 1/2" O'all Lg. | Phosphate-Coated Steel | Bondhus | Plastic Pouch | 7400A33 | 00000 | ||
Torx | ||||||||
Premium | ||||||||
| 5 | T15 Torx Screwdriver—8 5/16" O'all Lg. T20 Torx Screwdriver—8 5/16" O'all Lg. T25 Torx Screwdriver—8 5/16" O'all Lg. T27 Torx Screwdriver—8 5/16" O'all Lg. T30 Torx Screwdriver—8 5/16" O'all Lg. | Chrome-Plated Steel | Klein Tools | — | 9572N111 | 00000 | ||
Phillips and Slotted | ||||||||
Premium | ||||||||
| 2 | 1/4" Slotted Screwdriver—8 5/16" O'all Lg. No. 2 Phillips Screwdriver—8 1/4" O'all Lg. | Chrome-Plated Steel | Klein Tools | — | 5720A111 | 00000 | ||
| 2 | 1/4" Slotted Screwdriver—14 5/16" O'all Lg. No. 2 Phillips Screwdriver—14 5/16" O'all Lg. | Chrome-Plated Steel | Klein Tools | — | 5720A112 | 00000 | ||
| 5 | 3/16" Slotted Screwdriver—9 3/4" O'all Lg. 1/4" Slotted Screwdriver—8 5/16" O'all Lg. No. 1 Phillips Screwdriver—6 3/4" O'all Lg. No. 2 Phillips Screwdriver—8 1/4" O'all Lg. No. 2 Phillips Screwdriver—9 3/4" O'all Lg. | Chrome-Plated Steel | Klein Tools | — | 5720A113 | 00000 | ||
| 6 | 3/16" Slotted Screwdriver—6 3/4" O'all Lg. 1/4" Slotted Screwdriver—8 5/16" O'all Lg. 5/16" Slotted Screwdriver—11" O'all Lg. No. 1 Phillips Screwdriver—6 3/4" O'all Lg. No. 2 Phillips Screwdriver—8 1/4" O'all Lg. No. 3 Square Screwdriver—11" O'all Lg. | Chrome-Plated Steel | Klein Tools | — | 5720A114 | 00000 | ||
| 8 | 3/16" Slotted Screwdriver—6 3/4" O'all Lg. 1/4" Slotted Screwdriver—8 11/32" O'all Lg. 5/16" Slotted Screwdriver—3 7/16" O'all Lg. 5/16" Slotted Screwdriver—10 15/16" O'all Lg. No. 1 Phillips Screwdriver—6 3/4" O'all Lg. No. 2 Phillips Screwdriver—3 7/16" O'all Lg. No. 2 Phillips Screwdriver—8 5/16" O'all Lg. No. 3 Phillips Screwdriver—11" O'all Lg. | Chrome-Plated Steel | Klein Tools | — | 5720A85 | 00000 | ||
Value | ||||||||
| 6 | 3/16" Slotted Screwdriver—6 3/4" O'all Lg. 3/16" Slotted Screwdriver—9 3/4" O'all Lg. 1/4" Slotted Screwdriver—8 1/2" O'all Lg. 5/16" Slotted Screwdriver—11" O'all Lg. No. 1 Phillips Screwdriver—6 3/4" O'all Lg. No. 2 Phillips Screwdriver—8 1/2" O'all Lg. | Chrome-Plated Steel | — | — | 5720A84 | 00000 | ||
Phillips, Slotted, and Square | ||||||||
Premium | ||||||||
| 5 | 3/16" Slotted Screwdriver—9 3/4" O'all Lg. 1/4" Slotted Screwdriver—8 5/16" O'all Lg. No. 1 Phillips Screwdriver—6 3/4" O'all Lg. No. 2 Phillips Screwdriver—8 1/4" O'all Lg. No. 2 Square Screwdriver—8 1/4" O'all Lg. | Chrome-Plated Steel | Klein Tools | — | 5720A115 | 00000 | ||
Screw-Holding Screwdrivers
|
 |  |
Sleeve | Ball Detent |
 | |
Wedge Tip |
When you've only got one free hand to fasten, reach for these screwdrivers. They're useful when working in tight spaces or above crevices that screws could slip into.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
Standard Length—The most common screwdriver length for a specific drive size.
Long—An extended shaft turns screws in deep recesses other screwdrivers can't reach.
Sleeve—Designed to hold screws firmly against the tip of the screwdriver. The spring-loaded sleeve slides over a screw head and locks it in place. Once you’ve lined up the screw, release it with a button on the shaft before tightening.
Ball Detent and Wedge Tip—Create just enough friction inside the recess to keep the screw from dropping.
Shaft | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Drive Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Max. Access Angle | Screw-Holding Mechanism | Material | Mfr. | Each | |||
Phillips | ||||||||||||
Premium | ||||||||||||
| No. 0 | Long | 8 3/4" | 5" | 7/16" | — | Sleeve | Black-Oxide Steel | Greenlee | 55505A44 | 000000 | ||
| No. 1 | Long | 8 3/4" | 5" | 7/16" | — | Sleeve | Black-Oxide Steel | Greenlee | 55505A49 | 00000 | ||
| No. 2 | Long | 11 1/2" | 7" | 9/16" | — | Sleeve | Black-Oxide Steel | Greenlee | 55505A51 | 00000 | ||
Slotted | ||||||||||||
Premium | ||||||||||||
| 1/8" | Long | 8 3/4" | 5" | 7/16" | — | Sleeve | Black-Oxide Steel | Greenlee | 55505A45 | 00000 | ||
| 3/16" | Long | 10 3/4" | 6" | 1/2" | — | Sleeve | Black-Oxide Steel | Greenlee | 55505A47 | 00000 | ||
| 1/4" | Long | 11 1/2" | 7" | 9/16" | — | Sleeve | Black-Oxide Steel | Greenlee | 55505A48 | 00000 | ||
Hex | ||||||||||||
Premium | ||||||||||||
| 0.050" | Standard | 4 1/8" | 2 3/8" | 1/16" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A25 | 0000 | ||
| 1/16" | Standard | 4 11/16" | 2 1/2" | 1/16" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A26 | 0000 | ||
| 5/64" | Standard | 4 13/16" | 2 5/8" | 5/64" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A27 | 0000 | ||
| 3/32" | Standard | 5 3/16" | 2 13/16" | 3/32" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A28 | 0000 | ||
| 7/64" | Standard | 5 5/16" | 2 7/8" | 7/64" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A29 | 0000 | ||
| 1/8" | Standard | 6 5/8" | 3 1/8" | 1/8" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A31 | 0000 | ||
| 9/64" | Standard | 6 13/16" | 3 5/16" | 9/64" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A32 | 0000 | ||
| 5/32" | Standard | 7 7/8" | 3 5/8" | 5/32" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A33 | 0000 | ||
| 3/16" | Standard | 8" | 3 11/16" | 3/16" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A34 | 0000 | ||
| 7/32" | Standard | 9" | 4 3/16" | 7/32" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A35 | 0000 | ||
| 1/4" | Standard | 9 13/16" | 4 11/16" | 1/4" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A36 | 0000 | ||
| 5/16" | Standard | 10 3/8" | 5 5/8" | 5/16" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A37 | 0000 | ||
| 3/8" | Standard | 11 5/16" | 6 1/2" | 3/8" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A38 | 00000 | ||
| 1.27 mm | Standard | 4 1/8" | 2 3/8" | 1/16" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A39 | 0000 | ||
| 1.5 mm | Standard | 4 11/16" | 2 5/8" | 1/16" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A41 | 0000 | ||
| 2 mm | Standard | 5" | 2 13/16" | 3/32" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A42 | 0000 | ||
| 2.5 mm | Standard | 5 1/8" | 2 11/16" | 3/32" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A53 | 0000 | ||
| 3 mm | Standard | 6 11/16" | 3 5/16" | 1/8" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A54 | 0000 | ||
| 4 mm | Standard | 8 1/8" | 3 11/16" | 5/32" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A55 | 0000 | ||
| 5 mm | Standard | 8 5/8" | 4 5/16" | 3/16" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A56 | 0000 | ||
| 6 mm | Standard | 10 3/16" | 5 3/8" | 1/4" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A57 | 0000 | ||
| 8 mm | Standard | 11 3/16" | 6 3/8" | 5/16" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A58 | 0000 | ||
| 10 mm | Standard | 12" | 7 5/16" | 3/8" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A59 | 00000 | ||
Torx | ||||||||||||
Premium | ||||||||||||
| T8 | Standard | 5 9/16" | 2 3/8" | 1/8" | — | Wedge Tip | Nickel-Plated Steel | Wera | 55505A11 | 0000 | ||
| T9 | Standard | 5 9/16" | 2 3/8" | 5/32" | — | Wedge Tip | Nickel-Plated Steel | Wera | 55505A12 | 0000 | ||
| T10 | Standard | 6 5/16" | 3 1/8" | 5/32" | — | Wedge Tip | Nickel-Plated Steel | Wera | 55505A13 | 0000 | ||
| T15 | Standard | 7" | 3 1/8" | 5/32" | — | Wedge Tip | Nickel-Plated Steel | Wera | 55505A14 | 0000 | ||
| T20 | Standard | 7 13/16" | 4" | 5/32" | — | Wedge Tip | Nickel-Plated Steel | Wera | 55505A15 | 0000 | ||
| T20 | Long | 15 5/8" | 12" | 5/32" | — | Wedge Tip | Nickel-Plated Steel | Wera | 55505A16 | 00000 | ||
| T25 | Standard | 8" | 4" | 3/16" | — | Wedge Tip | Nickel-Plated Steel | Wera | 55505A17 | 0000 | ||
| T25 | Long | 16" | 12" | 1/4" | — | Wedge Tip | Nickel-Plated Steel | Wera | 55505A18 | 00000 | ||
| T27 | Standard | 8 5/8" | 4 9/16" | 7/32" | — | Wedge Tip | Nickel-Plated Steel | Wera | 55505A19 | 0000 | ||
| T27 | Long | 16" | 12" | 1/4" | — | Wedge Tip | Nickel-Plated Steel | Wera | 55505A21 | 00000 | ||
| T30 | Standard | 8 5/8" | 4 9/16" | 1/4" | — | Wedge Tip | Nickel-Plated Steel | Wera | 55505A22 | 00000 | ||
| T30 | Long | 16" | 12" | 1/4" | — | Wedge Tip | Nickel-Plated Steel | Wera | 55505A23 | 00000 | ||
| T40 | Standard | 9 1/2" | 5 3/16" | 9/32" | — | Wedge Tip | Nickel-Plated Steel | Wera | 55505A24 | 00000 | ||
Screwdriver/Nutdrivers
 |  |
6 Sizes | 11 Sizes |
|
Turn screws and nuts with a single tool. These screwdriver/nutdrivers come with reversible bits and shafts to turn multiple fastener sizes. Insert a bit into the shaft to drive screws or use the shaft on its own to turn nuts. All nest together to store in the body of the tool. Also known as 6-in-1 and 11-in-1 drivers.
Premium—The best screwdrivers available, with handles that keep you comfortable during long stretches of use. They come with high-quality bits that fit snugly into fastener recesses to turn screws quickly without slipping.
Value—We tested tools from dozens of manufacturers to offer near-premium quality at a fraction of the cost.
Shaft | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Sizes | Sizes Included | For Bit Hex Shank Size | Relative Lg. | Bolt Clearance | Overall Lg. | Lg. | Overall Wd. | Material | Bit-Holding Mechanism | Mfr. | Each | |||
Premium | ||||||||||||||
| 6 | Phillips: No. 1, No. 2 Slotted: 3/16", 1/4" Nutdriver: 1/4", 5/16" | 1/4", 5/16" | Standard | 2 1/16" | 8 1/2" | 2" | 7/16" | Chrome-Plated Steel | Ball Detent | Wiha | 6127A14 | 000000 | ||
| 11 | Phillips: No. 1, No. 2 Slotted: 3/16", 1/4" Torx: T20, T25 Square: No. 1, No. 2 Nutdriver: 1/4", 5/16", 3/8" | 1/4", 5/16" | Standard | 2 1/16" | 8 1/4" | 1 13/16" | 9/16" | Chrome-Plated Steel | Ball Detent | Wiha | 6127A15 | 00000 | ||
Value | ||||||||||||||
| 6 | Phillips: No. 1, No. 2 Slotted: 3/16", 1/4" Nutdriver: 1/4", 5/16" | 1/4", 5/16" | Standard | 1 7/8" | 7 3/4" | 2 1/4" | 7/16" | Chrome-Plated Steel | Ball Detent | — | 6127A38 | 0000 | ||
Electrical Insulating Screwdriver Sets
 |
|
Slim Insulated Shaft |
 |
Standard Insulated Shaft |
Prevent a dangerous zap if you accidentally touch a live circuit. An insulated handle and shaft absorb up to 1,000 volts of electric shock to meet ASTM, EN, or IEC standards. Use these screwdriver sets for everything from installing electrical panels to repairing outlets, switches, and light fixtures.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
Slim Insulated Shaft—Insulation built directly into the screwdriver shaft avoids the extra bulk of standard insulation. The slim profile fits into narrow openings and deep recesses, common on terminal blocks and small circuit breakers.
No. of Pieces | Includes | Insulated Shaft Type | Material | Mfr. | Specs. Met | Container Type | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|
Phillips | ||||||||||
Premium | ||||||||||
| 5 | No. 0 Phillips Screwdriver—6 3/8" O'all Lg. No. 1 Phillips Screwdriver—7" O'all Lg. No. 2 Phillips Screwdriver—8 1/4" O'all Lg. No. 3 Phillips Screwdriver—10 1/4" O'all Lg. No. 4 Phillips Screwdriver—12 1/4" O'all Lg. | Standard | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | — | 7020A42 | 000000 | ||
Phillips Terminal Screw | ||||||||||
Premium | ||||||||||
| 2 | No. 1 Phillips Terminal Screw Screwdriver—7" O'all Lg. No. 2 Phillips Terminal Screw Screwdriver—8 1/16" O'all Lg. | Standard | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | — | 7020A82 | 00000 | ||
Slotted | ||||||||||
Premium | ||||||||||
| 5 | 3/32" Slotted Screwdriver—6 3/8" O'all Lg. 5/32" Slotted Screwdriver—7 13/16" O'all Lg. 7/32" Slotted Screwdriver—8 3/4" O'all Lg. 1/4" Slotted Screwdriver—10" O'all Lg. 5/16" Slotted Screwdriver—11 1/4" O'all Lg. | Standard | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | — | 7020A51 | 00000 | ||
Torx | ||||||||||
Premium | ||||||||||
| 6 | T8 Torx Screwdriver—6 5/16" O'all Lg. T9 Torx Screwdriver—6 5/16" O'all Lg. T10 Torx Screwdriver—6 5/16" O'all Lg. T15 Torx Screwdriver—7" O'all Lg. T20 Torx Screwdriver—7" O'all Lg. T25 Torx Screwdriver—8 1/16" O'all Lg. | Standard | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | — | 7020A36 | 00000 | ||
Pozidriv® Terminal Screw | ||||||||||
Premium | ||||||||||
| 2 | No. 1 Pozidriv® Terminal Screw Screwdriver—7" O'all Lg. No. 2 Pozidriv® Terminal Screw Screwdriver—8 1/16" O'all Lg. | Standard | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | — | 7020A81 | 00000 | ||
Phillips and Slotted | ||||||||||
Premium | ||||||||||
| 5 | 3/32" Slotted Screwdriver—6 5/16" O'all Lg. 7/32" Slotted Screwdriver—8 3/4" O'all Lg. 1/4" Slotted Screwdriver—10" O'all Lg. No. 1 Phillips Screwdriver—8 1/4" O'all Lg. No. 2 Phillips Screwdriver—8 1/4" O'all Lg. | Standard | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | — | 7020A53 | 00000 | ||
| 6 | 3/32" Slotted Screwdriver—6 5/16" O'all Lg. 9/64" Slotted Screwdriver— 7 1/8" O'all Lg. 5/32" Slotted Screwdriver— 7 13/16" O'all Lg. 7/32" Slotted Screwdriver— 8 3/4" O'all Lg. No. 1 Phillips Screwdriver—7" O'all Lg. No. 2 Phillips Screwdriver—8 1/16" O'all Lg. | Standard | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | Plastic Rack | 7020A37 | 00000 | ||
Phillips, Slotted, and Pozidriv® Terminal Screw | ||||||||||
Premium | ||||||||||
| 7 | 9/64" Slotted Screwdriver— 7 1/8" O'all Lg. 5/32" Slotted Screwdriver—7 1/8" O'all Lg. 7/32" Slotted Screwdriver— 8 3/4" O'all Lg. No. 1 Phillips Screwdriver—6 5/16" O'all Lg. No. 1 Pozidriv® Terminal Screw Screwdriver— 6 5/16" O'all Lg. No. 2 Phillips Screwdriver—7 13/16" O'all Lg. No. 2 Pozidriv® Terminal Screw Screwdriver— 7 13/16" O'all Lg. | Slim | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | — | 7020A38 | 00000 | ||
Phillips, Slotted, and Square | ||||||||||
Premium | ||||||||||
| 7 | 5/32" Slotted Screwdriver—8 1/4" O'all Lg. 7/32" Slotted Screwdriver—9 1/2" O'all Lg. 1/4" Slotted Screwdriver—10 3/4" O'all Lg. No. 1 Phillips Screwdriver—7 1/2" O'all Lg. No. 2 Phillips Screwdriver—8 3/4" O'all Lg. No. 2 Square Screwdriver—10 1/2" O'all Lg. Insulated Voltage Tester (Use to Check Maximum 250 Volts) | Standard | Plastic-Coated Steel | Wiha | IEC 60900, EN 60900, ASTM F1505 | — | 53285A61 | 00000 | ||
Phillips, Slotted, Torx, and Pozidriv® | ||||||||||
Premium | ||||||||||
| 11 | 3/32" Slotted Screwdriver—6 5/16" O'all Lg. 9/64" Slotted Screwdriver— 7 1/8" O'all Lg. 5/32" Slotted Screwdriver— 9 3/4" O'all Lg. 7/32" Slotted Screwdriver— 11 3/4" O'all Lg. No. 1 Phillips Screwdriver—7" O'all Lg. No. 1 Pozidriv® Screwdriver—7" O'all Lg. No. 2 Phillips Screwdriver—8 1/16" O'all Lg. No. 2 Pozidriv® Screwdriver—8 1/16" O'all Lg. T10 Torx Screwdriver—6 5/16" O'all Lg. T15 Torx Screwdriver—7" O'all Lg. T20 Torx Screwdriver—7" O'all Lg. | Slim, Standard | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | Tote | 7020A39 | 000000 | ||
Cordless Screwdrivers
 |  |  |
DeWalt Pistol Grip | Milwaukee Pistol Grip | Milwaukee Multiposition Grip |
Power through tasks that would be tedious with a manual driver. These screwdrivers tighten and loosen screws quickly and with minimal effort. They're ideal for repair shops and other high-volume jobs where efficiency is key. Charge the batteries to work in remote areas without power.
Pistol Grip—The angled handle keeps your wrist in a comfortable, natural position, reducing fatigue during lengthy projects.
Multiposition Grip—Use the pistol grip to drive screws horizontally and the straight grip to drive vertically. Screwdrivers with a straight grip squeeze into tight places, such as inside cabinets or engine compartments.
Screwdrivers | Replacement Batteries | Replacement Chargers | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Battery | ||||||||||||||||||
No. of Speeds | Max. No-Load Speed, rpm | For Bit Hex Shank Size | Mfr. | Mfr. Model No. | Wt., lb. | Voltage, V DC | Chemistry | Included | Battery Charger Included | Each | Pkg. Qty. | Pkg. | Each | |||||
Pistol Grip | ||||||||||||||||||
| Variable | 500 | 1/4" | Milwaukee | 2401-22 | 2.3 | 12 | Lithium Ion (Li-Ion) | Yes | Yes | 4443A11 | 0000000 | 1 | 29735A314 | 000000 | 4443A22 | 000000 | ||
| Variable | 1,000 | 1/4" | DeWalt | DCF610S2 | 2.2 | 12 | Lithium Ion (Li-Ion) | Yes | Yes | 6978A71 | 000000 | 1 | 6978A72 | 000000 | 29835A113 | 000000 | ||
Multiposition Grip | ||||||||||||||||||
| 2 | 200, 600 | 1/4" | Milwaukee | 2101-22 | 1.3 | 4 | Lithium Ion (Li-Ion) | Yes | Yes | 7183A45 | 000000 | 1 | 7183A47 | 00000 | 7183A46 | 00000 | ||
Quick-Drive Ratcheting Bit Screwdrivers
 |
Fastening speed that rivals a power drill—no batteries required. These screwdrivers have a unique two-piece handle with internal gears that turn screws four times faster than a standard manual screwdriver. Grip the top collar with one hand and turn the handle with the other to drive screws. Release the collar to disengage the gears and return to normal speed for greater torque and control. A built-in ratchet eliminates the need to reposition your grip with every turn. Twist the collar to change the ratcheting direction. They come with interchangeable bits to handle a range of fasteners.
Premium—The best screwdrivers available, with handles that keep you comfortable during long stretches of use. They come with high-quality bits that fit snugly into fastener recesses to turn screws quickly without slipping.
Shaft | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Sizes | Sizes Included | For Bit Hex Shank Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Material | Bit-Holding Mechanism | Mfr. | Each | |||
Bit Screwdrivers with Bit Storage in Handle | |||||||||||||
Premium | |||||||||||||
| 4 | Phillips: No. 1, No. 2 Slotted: 3/16", 1/4" | 1/4" | Standard | 9 1/4" | 2 7/8" | 3/8" | Stainless Steel | Magnet | Spec Tools | 5647A65 | 000000 | ||
Electrical Insulating Changeable-Shaft Screwdriver Sets
 |
Prevent electric shock as you drive a variety of screws. The screwdrivers in these sets include an insulated handle and interchangeable shafts that absorb up to 1,000 volts to meet IEC standards. Simply remove and replace the shaft to fasten a range of screw sizes and styles. They come with a roll-up pouch for travel.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
No. of Sizes | Sizes Included | Components Included | Relative Lg. | Overall Lg. | Material | Specs. Met | Mfr. | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
Screwdrivers in Fabric Roll-Up Pouch | |||||||||||
Premium | |||||||||||
| 6 | Phillips: No. 1, No. 2 Slotted: 3/32", 9/64", 5/32", 7/32" | 1 Screwdriver Handle 6 Shafts | Standard | 8" | Plastic-Coated Steel | IEC 60900 | Wera | 6095A13 | 000000 | ||
| 6 | Phillips: No. 1, No. 2 Slotted: 9/64", 7/32" Square: No. 1, No. 2 | 1 Screwdriver Handle 6 Shafts | Standard | 8" | Plastic-Coated Steel | IEC 60900 | Wera | 6095A14 | 00000 | ||
| 15 | Phillips: No. 1, No. 2 Slotted: 3/32", 9/64", 5/32", 7/32", 1/4" Torx: T10, T15, T20, T25 Pozidriv®: No. 1, No. 2 Pozidriv® Terminal Screw: No. 1, No. 2 | 2 Screwdriver Handles 15 Shafts | Standard | 8" | Plastic-Coated Steel | IEC 60900 | Wera | 6095A12 | 000000 | ||
Static-Control Precise-Control Screwdriver Sets
 |
Protect delicate microelectronics from harmful static shocks. Also known as ESD-safe screwdrivers, these meet IEC requirements to drain static away from your workpiece before it causes damage. Precise-control screwdrivers allow for nimble, fine-tuned adjustments. Press the end of the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips.
Warning: These screwdrivers conduct electricity. Do not use them near active power sources.
No. of Pieces | Includes | Grip Style | Material | Static Control Rating | Surface Resistivity | Specs. Met | Container Type | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
Hex | |||||||||||
| 7 | 0.7 mm Hex Screwdriver—4 23/32" O'all Lg. 0.9 mm Hex Screwdriver—4 23/32" O'all Lg. 1.3 mm Hex Screwdriver—4 23/32" O'all Lg. 1.5 mm Hex Screwdriver—5 23/32" O'all Lg. 2 mm Hex Screwdriver—5 23/32" O'all Lg. 2.5 mm Hex Screwdriver—6 11/16" O'all Lg. 3 mm Hex Screwdriver—6 11/16" O'all Lg. | Plain | Chrome-Plated Steel | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | Plastic Roll-Up Pouch | 7440A93 | 000000 | ||
Torx | |||||||||||
| 7 | T4 Torx Screwdriver—4 23/32" O'all Lg. T5 Torx Screwdriver—4 23/32" O'all Lg. T6 Torx Screwdriver—4 23/32" O'all Lg. T7 Torx Screwdriver—4 23/32" O'all Lg. T8 Torx Screwdriver—4 23/32" O'all Lg. T9 Torx Screwdriver—5 23/32" O'all Lg. T10 Torx Screwdriver—5 23/32" O'all Lg. | Plain | Chrome-Plated Steel | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | — | 7440A71 | 00000 | ||
Phillips and Slotted | |||||||||||
| 7 | 0.059" Slotted Screwdriver—4 23/32" O'all Lg. 0.079" Slotted Screwdriver—4 23/32" O'all Lg. 0.098" Slotted Screwdriver—5 23/32" O'all Lg. 0.138" Slotted Screwdriver—6 11/16" O'all Lg. No. 00 Phillips Screwdriver—4 23/32" O'all Lg. No. 0 Phillips Screwdriver—5 23/32" O'all Lg. No. 1 Phillips Screwdriver—6 11/16" O'all Lg. | Plain | Chrome-Plated Steel | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | — | 7440A41 | 00000 | ||
| 7 | 0.079" Slotted Screwdriver—10 1/4" O'all Lg. 0.098" Slotted Screwdriver—9 21/32" O'all Lg. 0.118" Slotted Screwdriver—10 1/4" O'all Lg. 0.138" Slotted Screwdriver—10 1/4" O'all Lg. 0.157" Slotted Screwdriver—10 1/4" O'all Lg. No. 0 Phillips Screwdriver—9 21/32" O'all Lg. No. 1 Phillips Screwdriver—10 1/4" O'all Lg. | Plain | Chrome-Plated Steel | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | — | 7440A73 | 00000 | ||
Phillips, Slotted, Hex, and Torx | |||||||||||
| 50 | 5 3/4" Lg. Chip Lifter Hex Screwdrivers: 1/16", 3/32", 7/64", 1/8" Hex Screwdrivers: 0.7 mm, 0.9 mm, 1.3 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm Nutdrivers: 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm, 1/8", 5/32", 3/16", 1/4" Phillips Screwdrivers: No. 000, No. 00, No. 0, No. 1 Slotted Screwdrivers: 0.031", 0.039", 0.047", 0.059", 0.079", 0.098", 0.118", 0.138", 0.157" Torx Screwdrivers: T1, T2, T3, T4, T5, T6, T7, T8, T9, T10, T15, T20 | Plain | Chrome-Plated Steel | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | Metal Stand | 7440A95 | 000000 | ||
Nonsparking Screwdrivers
 |
Shaft | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Drive Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Material | Mfr. | Certification | Each | |||
Phillips | |||||||||||
Premium | |||||||||||
| No. 0 | Standard | 6" | 2 3/8" | 1/8" | Beryllium Copper | Ampco Safety Tools | FM Approved | 6529A5 | 000000 | ||
| No. 1 | Standard | 6 1/2" | 3" | 3/16" | Beryllium Copper | Ampco Safety Tools | FM Approved | 6529A1 | 00000 | ||
| No. 2 | Standard | 7 1/2" | 4" | 1/4" | Beryllium Copper | Ampco Safety Tools | FM Approved | 6529A2 | 00000 | ||
| No. 3 | Standard | 10 1/8" | 6" | 5/16" | Beryllium Copper | Ampco Safety Tools | FM Approved | 6529A3 | 00000 | ||
| No. 4 | Standard | 13" | 8" | 3/8" | Beryllium Copper | Ampco Safety Tools | FM Approved | 6529A4 | 00000 | ||
Slotted | |||||||||||
Premium | |||||||||||
| 1/8" | Standard | 5 1/2" | 2 3/8" | 3/16" | Beryllium Copper | Ampco Safety Tools | FM Approved | 6525A31 | 00000 | ||
| 1/8" | Long | 9 1/2" | 6" | 1/4" | Beryllium Copper | Ampco Safety Tools | FM Approved | 6525A6 | 00000 | ||
| 5/32" | Standard | 6 1/2" | 2 3/4" | 3/16" | Beryllium Copper | Ampco Safety Tools | FM Approved | 6525A34 | 00000 | ||
| 5/32" | Long | 8 1/2" | 4 3/4" | 3/16" | Beryllium Copper | Ampco Safety Tools | FM Approved | 6525A35 | 00000 | ||
| 3/16" | Standard | 6 5/8" | 3 1/8" | 1/4" | Beryllium Copper | Ampco Safety Tools | FM Approved | 6525A7 | 00000 | ||
| 3/16" | Long | 9 1/2" | 5 7/8" | 3/16" | Beryllium Copper | Ampco Safety Tools | FM Approved | 6525A111 | 00000 | ||
| 3/16" | Long | 13" | 9 1/4" | 3/16" | Beryllium Copper | Ampco Safety Tools | FM Approved | 6525A36 | 00000 | ||
| 1/4" | Stubby | 5" | 1 1/2" | 1/4" | Beryllium Copper | Ampco Safety Tools | FM Approved | 6525A37 | 00000 | ||
| 1/4" | Standard | 7 5/8" | 4" | 5/16" | Beryllium Copper | Ampco Safety Tools | FM Approved | 6525A5 | 00000 | ||
| 1/4" | Long | 9 5/8" | 5 7/8" | 1/4" | Beryllium Copper | Ampco Safety Tools | FM Approved | 6525A32 | 00000 | ||
| 5/16" | Standard | 6 1/2" | 3" | 3/8" | Beryllium Copper | Ampco Safety Tools | FM Approved | 6525A1 | 00000 | ||
| 5/16" | Long | 10 1/8" | 6" | 7/16" | Beryllium Copper | Ampco Safety Tools | FM Approved | 6525A2 | 00000 | ||
| 3/8" | Standard | 13" | 8" | 1/2" | Beryllium Copper | Ampco Safety Tools | FM Approved | 6525A3 | 00000 | ||
| 3/8" | Long | 17" | 12" | 1/2" | Beryllium Copper | Ampco Safety Tools | FM Approved | 6525A4 | 00000 | ||
| 3/8" | Long | 23" | 18" | 3/8" | Beryllium Copper | Ampco Safety Tools | FM Approved | 6525A38 | 000000 | ||
Voltage-Detecting Screwdriver/Nutdrivers
 | |
Safely test for live circuits before driving screws and nuts. A detector snaps in and out of the handle of these screwdriver/nutdrivers to check for voltage without touching live wires. Light and sound indicators alert you when over 50 volts AC is detected. These tools come with reversible bits and shafts to turn multiple fastener sizes. Insert a bit into the shaft to drive screws or use the shaft on its own to turn nuts. All nest together to store in the body of the tool. Also known as 10-in-1 drivers.
Value—We tested tools from dozens of manufacturers to offer near-premium quality at a fraction of the cost.
Shaft | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Sizes | Sizes Included | For Bit Hex Shank Size | Relative Lg. | Bolt Clearance | Overall Lg. | Lg. | Overall Wd. | Material | Bit-Holding Mechanism | Each | |||
Value | |||||||||||||
| 10 | Phillips: No. 1, No. 2 Slotted: 3/16", 1/4" Torx: T10, T15 Square: No. 1, No. 2 Nutdriver: 1/4", 5/16" | 1/4", 5/16" | Standard | 1 13/16" | 9" | 3 3/8" | 1 1/4" | Plastic-Coated Steel | Ball Detent | 6127A13 | 000000 | ||
High-Visibility Screwdriver Sets
 |
 |
Bright-colored handles make the screwdrivers in these sets easy to spot in your toolbox. The unique color can also designate drivers for a specific task.
Ideal for industrial maintenance, these no-frills sets withstand years of heavy use in the shop and on the jobsite. The hard plastic handles won't crack or wear out from drops and scrapes. They're also easy to wipe down and won't get sticky or gummy when exposed to oils or chemicals, unlike soft handles.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
No. of Pieces | Includes | Material | Mfr. | Choose a Handle Color | Each | |||
|---|---|---|---|---|---|---|---|---|
Phillips | ||||||||
Premium | ||||||||
| 5 | No. 0 Phillips Screwdriver—6 1/4" O'all Lg. No. 1 Phillips Screwdriver—7" O'all Lg. No. 2 Phillips Screwdriver— 3 3/4" O'all Lg. No. 2 Phillips Screwdriver—8 1/2" O'all Lg. No. 3 Phillips Screwdriver—13" O'all Lg. | Black-Oxide Steel | Mayhew | Fluorescent Green, Fluorescent Orange | 56805A61 | 000000 | ||
Slotted | ||||||||
Premium | ||||||||
| 5 | 1/8" Slotted Screwdriver—6 1/4" O'all Lg. 3/16" Slotted Screwdriver—7" O'all Lg. 1/4" Slotted Screwdriver—3 3/4" O'all Lg. 1/4" Slotted Screwdriver—8 1/2" O'all Lg. 5/16" Slotted Screwdriver—11" O'all Lg. | Black-Oxide Steel | Mayhew | Fluorescent Green, Fluorescent Orange | 56805A62 | 00000 | ||
Torx | ||||||||
Premium | ||||||||
| 6 | T6 Torx Screwdriver—4 3/4" O'all Lg. T8 Torx Screwdriver—5 3/4" O'all Lg. T10 Torx Screwdriver—7" O'all Lg. T15 Torx Screwdriver—7" O'all Lg. T20 Torx Screwdriver—7" O'all Lg. T25 Torx Screwdriver—8" O'all Lg. | Black-Oxide Steel | Mayhew | Fluorescent Green, Fluorescent Orange | 56805A63 | 00000 | ||
Phillips and Slotted | ||||||||
Premium | ||||||||
| 7 | 3/16" Slotted Screwdriver—9 1/2" O'all Lg. 1/4" Slotted Screwdriver—8 1/4" O'all Lg. 5/16" Slotted Screwdriver—10 3/4" O'all Lg. 3/8" Slotted Screwdriver—13" O'all Lg. No. 1 Phillips Screwdriver—6 1/2" O'all Lg. No. 2 Phillips Screwdriver—8 1/4" O'all Lg. No. 3 Phillips Screwdriver—10 3/4" O'all Lg. | Black-Oxide Steel | Mayhew | Fluorescent Green, Fluorescent Orange | 56805A67 | 00000 | ||
| 11 | 1/8" Slotted Screwdriver—6 1/4" O'all Lg. 3/16" Slotted Screwdriver—7" O'all Lg. 1/4" Slotted Screwdriver—3 3/4" O'all Lg. 1/4" Slotted Screwdriver—8 1/2" O'all Lg. 5/16" Slotted Screwdriver—11" O'all Lg. 3/8" Slotted Screwdriver—13" O'all Lg. No. 0 Phillips Screwdriver—6 1/4" O'all Lg. No. 1 Phillips Screwdriver—7" O'all Lg. No. 2 Phillips Screwdriver— 3 3/4" O'all Lg. No. 2 Phillips Screwdriver—8 1/2" O'all Lg. No. 3 Phillips Screwdriver—13" O'all Lg. | Black-Oxide Steel | Mayhew | Fluorescent Green, Fluorescent Orange | 56805A64 | 00000 | ||
Strikable Screwdrivers
 |  |
Strike with Hammer | Shown Using Hex-Shaped Bolster |
 | |
Grooved Tip |
These are the toughest, most durable screwdrivers around. Whack them with a hammer to loosen stripped screws or pry off boards. Also known as demolition screwdrivers, their steel shaft extends all the way through the handle and there's a metal end cap for striking. If you need extra torque to turn a stubborn screw, grip the hex-shaped bolster at the top of the handle with a wrench.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
Standard Length—The most common screwdriver length for a specific drive size.
Long—An extended shaft turns screws in deep recesses other screwdrivers can't reach.
Grooved Tip—Bites into the screw slot for a firm hold, so you can make fast, easy turns without slippage.
Shaft | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Drive Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Tip Texture | Material | Cap Material | Mfr. | Each | |||
Phillips | ||||||||||||
Premium | ||||||||||||
| No. 1 | Standard | 7" | 3 1/8" | 3/16" | — | Nickel-Plated Steel | Steel | Wera | 7249A41 | 00000 | ||
| No. 2 | Standard | 8" | 4" | 1/4" | — | Nickel-Plated Steel | Steel | Wera | 7249A42 | 00000 | ||
| No. 3 | Standard | 10 1/4" | 6" | 5/16" | — | Nickel-Plated Steel | Steel | Wera | 7249A43 | 00000 | ||
| No. 4 | Standard | 12 1/2" | 8" | 3/8" | — | Nickel-Plated Steel | Steel | Wera | 7249A44 | 00000 | ||
Slotted | ||||||||||||
Premium | ||||||||||||
| 3/16" | Standard | 7 7/16" | 3 1/2" | 3/16" | — | Nickel-Plated Steel | Steel | Wera | 7249A32 | 0000 | ||
| 7/32" | Standard | 8 1/4" | 4" | 1/4" | — | Nickel-Plated Steel | Steel | Wera | 7249A33 | 00000 | ||
| 9/32" | Standard | 9" | 5" | 9/32" | — | Nickel-Plated Steel | Steel | Wera | 7249A34 | 00000 | ||
| 11/32" | Standard | 10 1/4" | 6" | 3/8" | — | Nickel-Plated Steel | Steel | Wera | 7249A35 | 00000 | ||
| 3/8" | Standard | 11 1/4" | 7" | 3/8" | — | Nickel-Plated Steel | Steel | Wera | 7249A36 | 00000 | ||
| 1/2" | Standard | 12 1/2" | 8" | 15/32" | — | Nickel-Plated Steel | Steel | Wera | 7249A37 | 00000 | ||
| 9/16" | Standard | 14 1/2" | 10" | 9/16" | — | Nickel-Plated Steel | Steel | Wera | 7249A38 | 00000 | ||
Torx | ||||||||||||
Premium | ||||||||||||
| T15 | Standard | 7" | 3 1/8" | 3/16" | — | Nickel-Plated Steel | Steel | Wera | 7249A72 | 0000 | ||
| T20 | Standard | 7 3/8" | 3 1/2" | 3/16" | — | Nickel-Plated Steel | Steel | Wera | 7249A73 | 0000 | ||
| T25 | Standard | 8 1/16" | 4" | 1/4" | — | Nickel-Plated Steel | Steel | Wera | 7249A74 | 00000 | ||
| T27 | Standard | 9" | 5" | 1/4" | — | Nickel-Plated Steel | Steel | Wera | 7249A75 | 00000 | ||
| T30 | Standard | 10 5/16" | 6" | 5/16" | — | Nickel-Plated Steel | Steel | Wera | 7249A76 | 00000 | ||
| T40 | Standard | 10 5/16" | 6" | 5/16" | — | Nickel-Plated Steel | Steel | Wera | 7249A77 | 00000 | ||
JIS | ||||||||||||
Premium | ||||||||||||
| No. 1 | Standard | 6 15/16" | 3" | 7/32" | Grooved | Chrome-Plated Steel | Chrome-Plated Steel | Vessel | 7249A82 | 00000 | ||
| No. 2 | Standard | 8 3/8" | 4" | 1/4" | Grooved | Chrome-Plated Steel | Chrome-Plated Steel | Vessel | 7249A83 | 00000 | ||
| No. 2 | Long | 10 3/8" | 6" | 1/4" | Grooved | Chrome-Plated Steel | Chrome-Plated Steel | Vessel | 7249A84 | 00000 | ||
| No. 3 | Standard | 10 15/16" | 6" | 5/16" | Grooved | Chrome-Plated Steel | Chrome-Plated Steel | Vessel | 7249A85 | 00000 | ||
Pozidriv® | ||||||||||||
Premium | ||||||||||||
| No. 1 | Standard | 7" | 3 1/8" | 3/16" | — | Nickel-Plated Steel | Steel | Wera | 7249A62 | 00000 | ||
| No. 2 | Standard | 8 1/16" | 4" | 1/4" | — | Nickel-Plated Steel | Steel | Wera | 7249A63 | 00000 | ||
| No. 3 | Standard | 10 5/16" | 6" | 5/16" | — | Nickel-Plated Steel | Steel | Wera | 7249A64 | 00000 | ||
| No. 4 | Standard | 12 1/2" | 8" | 3/8" | — | Nickel-Plated Steel | Steel | Wera | 7249A65 | 00000 | ||
Cordless Screwdrivers for Low Light
 |
Fasten screws in dimly-lit spaces without straining your eyes. LEDs light the tip of these screwdrivers to illuminate your work area. They are battery-powered to tighten and loosen screws quickly and with minimal effort. Snap one of the included bits into the shaft, and stow the others in the handle so you won't lose them.
Shaft | Bit | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Sizes | Sizes Included | For Bit Hex Shank Size | Overall Lg. | Material | Lg. | Overall Wd. | Material | Holding Mechanism | Grip Style | Batteries Included | Each | ||
| 6 | Phillips: No. 0, No. 1 Slotted: 1/16", 1/8" Torx: T5, T6 | 4 mm | 7 1/2" | Steel | 9/16" | 9/32" | Steel | Quick-Change Chuck | Plain | Yes | 5509A46 | 000000 | |
Electrical Insulating Bit Screwdrivers
 |
If you accidentally touch a live circuit, these bit screwdrivers prevent a dangerous zap. An insulated handle and shaft absorb up to 1,000 volts of electric shock to meet EN and IEC standards. Use these screwdrivers for everything from installing electrical panels to repairing outlets, switches, and light fixtures. Change the bit to drive a variety of screws with a single tool.
Premium—The best screwdrivers available, with handles that keep you comfortable during long stretches of use. They come with high-quality bits that fit snugly into fastener recesses to turn screws quickly without slipping.
Shaft | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Sizes | Sizes Included | For Bit Hex Shank Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Material | Bit-Holding Mechanism | Specs. Met | Mfr. | Each | |||
Bit Screwdrivers with Bit Storage in Handle | ||||||||||||||
Premium | ||||||||||||||
| 13 | Phillips: No. 0, No. 1, No. 2, No. 3 Slotted: 5/32", 7/32", 1/4" Torx: T15, T20, T25 Square: No. 1, No. 2, No. 3 | 1/4" | Standard | 9 1/8" | 3 3/8" | 0.48" | Plastic-Coated Steel | Magnet | IEC 60900, EN 60900 | Wiha | 7315A71 | 000000 | ||
Static-Control Precise-Control Screwdrivers
 |
Shaft | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Drive Size | Overall Lg. | Lg. | Overall Wd. | Grip Style | Static Control Rating | Surface Resistivity | Specs. Met | Each | |||
Phillips | |||||||||||
Chrome-Plated Steel | |||||||||||
| No. 000 | 5 5/16" | 1 5/8" | 3/32" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A72 | 000000 | ||
| No. 00 | 5 5/16" | 1 5/8" | 3/32" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A21 | 0000 | ||
| No. 0 | 5 11/16" | 2" | 1/8" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A22 | 0000 | ||
| No. 1 | 6 5/16" | 2 3/8" | 5/32" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A23 | 0000 | ||
Slotted | |||||||||||
Black-Oxide Steel | |||||||||||
| 0.025" | 4 15/16" | 1 1/4" | 3/32" | Plain | Antistatic | 1× 10^9 ohm/sq. to 1× 10^11 ohm/sq. | — | 7440A27 | 0000 | ||
| 0.040" | 4 15/16" | 1 1/4" | 3/32" | Plain | Antistatic | 1× 10^9 ohm/sq. to 1× 10^11 ohm/sq. | — | 7440A28 | 0000 | ||
| 0.055" | 4 15/16" | 1 1/4" | 3/32" | Plain | Antistatic | 1× 10^9 ohm/sq. to 1× 10^11 ohm/sq. | — | 7440A29 | 0000 | ||
Chrome-Plated Steel | |||||||||||
| 0.059" | 5 5/16" | 1 5/8" | 3/32" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A11 | 0000 | ||
| 0.079" | 5 1/2" | 1 5/8" | 3/32" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A12 | 0000 | ||
| 0.098" | 5 11/16" | 2" | 3/32" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A13 | 0000 | ||
| 0.118" | 5 11/16" | 2" | 1/8" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A14 | 0000 | ||
| 0.138" | 6 5/16" | 2 3/8" | 1/8" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A15 | 0000 | ||
| 0.157" | 6 5/16" | 2 3/8" | 5/32" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A16 | 0000 | ||
Hex | |||||||||||
Chrome-Plated Steel | |||||||||||
| 0.028" | 5 5/16" | 1 5/8" | 3/32" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A74 | 00000 | ||
| 0.035" | 5 5/16" | 1 5/8" | 3/32" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A75 | 00000 | ||
| 0.050" | 5 5/16" | 1 5/8" | 3/32" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A76 | 0000 | ||
| 1/16" | 5 11/16" | 2" | 3/32" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A77 | 0000 | ||
| 5/64" | 5 11/16" | 2" | 1/8" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A78 | 0000 | ||
| 3/32" | 6 5/16" | 2" | 1/8" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A79 | 0000 | ||
| 7/64" | 6 5/16" | 2 1/2" | 1/8" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A81 | 0000 | ||
| 1/8" | 6 5/16" | 2 1/2" | 5/32" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A82 | 0000 | ||
| 1.5 mm | 5 9/16" | 2" | 3/32" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A87 | 0000 | ||
| 2.5 mm | 6 5/16" | 2 1/2" | 1/8" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A89 | 0000 | ||
| 3 mm | 6 5/16" | 2 1/2" | 5/32" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A91 | 0000 | ||
Torx | |||||||||||
Chrome-Plated Steel | |||||||||||
| T1 | 5 5/16" | 1 5/8" | 3/32" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A51 | 00000 | ||
| T2 | 5 5/16" | 1 5/8" | 3/32" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A52 | 00000 | ||
| T3 | 5 5/16" | 1 5/8" | 3/32" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A53 | 00000 | ||
| T4 | 5 5/16" | 1 5/8" | 3/32" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A54 | 00000 | ||
| T5 | 5 5/16" | 1 5/8" | 3/32" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A55 | 00000 | ||
| T6 | 5 5/16" | 1 5/8" | 3/32" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A56 | 00000 | ||
| T7 | 5 5/16" | 1 5/8" | 3/32" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A57 | 00000 | ||
| T8 | 5 5/16" | 1 5/8" | 3/32" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A58 | 00000 | ||
| T9 | 5 11/16" | 2" | 1/8" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A59 | 00000 | ||
| T10 | 5 11/16" | 2" | 1/8" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A61 | 00000 | ||
| T15 | 6 11/16" | 2 3/8" | 5/32" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A62 | 00000 | ||
| T20 | 6 11/16" | 2 3/8" | 5/32" | Plain | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 7440A63 | 00000 | ||
Screwdriver Sets for Stainless Steel Screws
 |
No. of Pieces | Includes | Material | Mfr. | Container Type | Each | |||
|---|---|---|---|---|---|---|---|---|
Phillips and Slotted | ||||||||
Premium | ||||||||
| 6 | 1/8" Slotted Screwdriver—6 3/8" O'all Lg. 5/32" Slotted Screwdriver—8" O'all Lg. 7/32" Slotted Screwdriver—8 3/4" O'all Lg. 1/4" Slotted Screwdriver—10" O'all Lg. No. 1 Phillips Screwdriver—7" O'all Lg. No. 2 Phillips Screwdriver—8 1/4" O'all Lg. | Stainless Steel | Wera | Plastic Rack | 56405A71 | 000000 | ||
Phillips, Slotted, and Pozidriv® | ||||||||
Premium | ||||||||
| 6 | 1/8" Slotted Screwdriver—6 3/8" O'all Lg. 1/4" Slotted Screwdriver—10" O'all Lg. No. 1 Phillips Screwdriver—7" O'all Lg. No. 1 Pozidriv® Screwdriver—7" O'all Lg. No. 2 Phillips Screwdriver—8 1/8" O'all Lg. No. 2 Pozidriv® Screwdriver—8 1/8" O'all Lg. | Stainless Steel | Wera | Plastic Rack | 56405A72 | 00000 | ||
Compact Screwdrivers
Antislip-Grip Screwdrivers
 |
Shaft | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Drive Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Material | Cap Material | Mfr. | Each | |||
Phillips | |||||||||||
Premium | |||||||||||
| No. 0 | Standard | 6 7/16" | 2 3/8" | 1/8" | Chrome-Plated Steel | — | Witte | 52915A33 | 000000 | ||
| No. 1 | Standard | 7 5/16" | 3 1/8" | 3/16" | Chrome-Plated Steel | Chrome-Plated Steel | Wiha | 52915A46 | 00000 | ||
| No. 2 | Standard | 8 1/2" | 3 15/16" | 1/4" | Chrome-Plated Steel | Chrome-Plated Steel | Wiha | 52915A47 | 00000 | ||
| No. 3 | Standard | 10 3/4" | 5 15/16" | 5/16" | Chrome-Plated Steel | Chrome-Plated Steel | Wiha | 52915A48 | 00000 | ||
Slotted | |||||||||||
Premium | |||||||||||
| 1/8" | Standard | 7" | 3" | 1/8" | Chrome-Plated Steel | — | Witte | 52915A37 | 00000 | ||
| 5/32" | Standard | 7" | 3" | 1/8" | Chrome-Plated Steel | — | Witte | 52915A31 | 00000 | ||
| 3/16" | Standard | 7 15/16" | 3 5/8" | 1/4" | Chrome-Plated Steel | Chrome-Plated Steel | Wiha | 52915A41 | 00000 | ||
| 7/32" | Standard | 8 1/2" | 3 15/16" | 9/32" | Chrome-Plated Steel | Chrome-Plated Steel | Wiha | 52915A42 | 00000 | ||
| 1/4" | Standard | 9 1/2" | 5" | 5/16" | Chrome-Plated Steel | Chrome-Plated Steel | Wiha | 52915A43 | 00000 | ||
| 5/16" | Standard | 10 3/4" | 5 15/16" | 13/32" | Chrome-Plated Steel | Chrome-Plated Steel | Wiha | 52915A44 | 00000 | ||
| 3/8" | Standard | 11 3/4" | 7" | 7/16" | Chrome-Plated Steel | Chrome-Plated Steel | Wiha | 52915A45 | 00000 | ||
Torx | |||||||||||
Premium | |||||||||||
| T5 | Standard | 6 7/16" | 2 3/8" | 1/8" | Chrome-Plated Steel | — | Witte | 52915A61 | 00000 | ||
| T6 | Standard | 6 7/16" | 2 3/8" | 1/8" | Chrome-Plated Steel | — | Witte | 52915A62 | 00000 | ||
| T7 | Standard | 6 7/16" | 2 3/8" | 1/8" | Chrome-Plated Steel | — | Witte | 52915A63 | 00000 | ||
| T8 | Standard | 6 7/16" | 2 3/8" | 1/8" | Chrome-Plated Steel | — | Witte | 52915A64 | 00000 | ||
| T9 | Standard | 6 7/16" | 2 3/8" | 1/8" | Chrome-Plated Steel | — | Witte | 52915A65 | 00000 | ||
| T10 | Standard | 7 3/16" | 3 1/8" | 5/32" | Chrome-Plated Steel | — | Witte | 52915A66 | 00000 | ||
| T15 | Standard | 7 3/16" | 3 1/8" | 5/32" | Chrome-Plated Steel | — | Witte | 52915A67 | 00000 | ||
Strikable Screwdriver Sets
| |
Strike with Hammer | Shown Using Hex-Shaped Bolster |
 |
Keep on hand multiple sizes and drive styles of the toughest, most durable screwdrivers around. Whack them with a hammer to loosen stripped screws or pry off boards. Also known as demolition screwdrivers, their steel shaft extends all the way through the handle and there's a metal end cap for striking. If you need extra torque to turn a stubborn screw, grip the hex-shaped bolster at the top of the handle with a wrench.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
No. of Pieces | Includes | Material | Cap Material | Mfr. | Container Type | Each | |||
|---|---|---|---|---|---|---|---|---|---|
Torx | |||||||||
Premium | |||||||||
| 6 | T15 Torx Screwdriver—3 1/8" O'all Lg. T20 Torx Screwdriver—3 9/16" O'all Lg. T25 Torx Screwdriver—3 15/16" O'all Lg. T27 Torx Screwdriver—4 15/16" O'all Lg. T30 Torx Screwdriver—4 15/16" O'all Lg. T40 Torx Screwdriver—5 15/16" O'all Lg. | Nickel-Plated Steel | Steel | Wera | Plastic Rack | 7249A101 | 000000 | ||
Phillips and Slotted | |||||||||
Premium | |||||||||
| 6 | 9/64" Slotted Screwdriver—6 3/8" O'all Lg. 3/16" Slotted Screwdriver—7 7/16" O'all Lg. 7/32" Slotted Screwdriver—8 1/4" O'all Lg. 9/32" Slotted Screwdriver—9" O'all Lg. No. 1 Phillips Screwdriver—7" O'all Lg. No. 2 Phillips Screwdriver—8" O'all Lg. | Nickel-Plated Steel | Steel | Wera | Plastic Rack | 7249A51 | 00000 | ||
Phillips, Slotted, Torx, and Pozidriv® | |||||||||
Premium | |||||||||
| 13 | 7/64" Slotted Screwdriver—3 9/16" O'all Lg. 9/64" Slotted Screwdriver—3 1/8" O'all Lg. 7/32" Slotted Screwdriver—3 15/16" O'all Lg. 9/32" Slotted Screwdriver—4 15/16" O'all Lg. 11/32" Slotted Screwdriver—5 15/16" O'all Lg. No. 1 Phillips Screwdriver—3 1/8" O'all Lg. No. 1 Pozidriv Screwdriver—3 1/8" O'all Lg. No. 2 Phillips Screwdriver—3 15/16" O'all Lg. No. 2 Pozidriv Screwdriver—3 15/16" O'all Lg. No. 3 Phillips Screwdriver—5 7/8" O'all Lg. No. 3 Pozidriv Screwdriver—5 7/8" O'all Lg. T20 Torx Screwdriver—3 9/16" O'all Lg. T25 Torx Screwdriver—3 15/16" O'all Lg. | Nickel-Plated Steel | Steel | Wera | Plastic Rack | 7249A102 | 000000 | ||
Ratcheting Bit Screwdrivers
 |  |
Bit Screwdrivers with Bit Storage in Handle | Bit Screwdrivers with Bit Storage in Pouch |
Speed up fastening jobs without the hand strain. These screwdrivers have a built-in ratchet that eliminates the need to reposition your grip with every turn. Twist a collar on the handle or flip the lever to change the ratcheting direction. These screwdrivers come with bits to drive multiple screw styles and sizes with a single tool.
Premium—The best screwdrivers available, with handles that keep you comfortable during long stretches of use. They come with high-quality bits that fit snugly into fastener recesses to turn screws quickly without slipping.
Value—We tested tools from dozens of manufacturers to offer near-premium quality at a fraction of the cost.
Stubby—An extra-short handle and shaft squeeze behind mounted equipment and inside small panels.
Shaft | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Sizes | Sizes Included | For Bit Hex Shank Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Material | Bit-Holding Mechanism | Mfr. | Each | |||
Bit Screwdrivers with Bit Storage in Handle | |||||||||||||
Premium | |||||||||||||
| 6 | Phillips: No. 1, No. 2 Slotted: 7/32" Torx: T15, T20, T25 | 1/4" | Stubby | 1" | — | — | — | Magnet | Wera | 4057A12 | 000000 | ||
| 12 | Phillips: No. 0, No. 1, No. 2, No. 3 Slotted: 5/32", 15/64" Torx: T10, T15, T20, T25 Square: No. 1, No. 2 | 1/4" | Standard | 9 7/16" | 3" | 3/8" | Aluminum | Ball Detent | Megapro Tools | 4057A13 | 00000 | ||
Value | |||||||||||||
| 7 | Phillips: No. 1, No. 2 Slotted: 1/4", 3/16" Torx: T15 Square: No. 1, No. 2 | 1/4" | Stubby | 4 5/8" | 1 1/2" | 3/8" | Chrome-Plated Steel | Magnet | — | 52725A41 | 00000 | ||
| 10 | Phillips: No. 1, No. 2 Slotted: 3/16", 1/4" Torx: T10, T15 Square: No. 1, No. 2 Pozidriv®: No. 1, No. 2 | 1/4" | Standard | 10" | 3" | 3/8" | Chrome-Plated Steel | Magnet | — | 4057A52 | 00000 | ||
Bit Screwdrivers with Bit Storage in Pouch | |||||||||||||
Premium | |||||||||||||
| 16 | Phillips: No. 1, No. 2, No. 3 Slotted: 7/32" Hex: 3/23", 1/8", 5/32", 3/16" Tamper-Resistant Torx: T10, T15, T20, T25, T30 Square: No. 1, No. 2, No. 3 | 1/4" | Standard | 7 5/8" | 1" | 3/8" | Nickel-Plated Steel | Quick-Change Chuck | Wera | 4057A11 | 000000 | ||
Static-Control Bit Screwdrivers without Bits
 |
Fasten a variety of screws on circuit boards and other sensitive electronics, while preventing harmful static shocks. Also known as ESD-safe screwdrivers, these drain static away from your workpiece before it causes damage. Insert a bit (not included) into the bit holder to drive multiple screw styles and sizes with a single tool.
Warning: These screwdrivers conduct electricity. Do not use them near active power sources.
Premium—The best screwdrivers available, with handles that keep you comfortable during long stretches of use.
Stubby—An extra-short handle and shaft squeeze behind mounted equipment and inside small panels.
Shaft | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Bit Hex Shank Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Material | Bit-Holding Mechanism | Static Control Rating | Surface Resistivity | Mfr. | Each | |||
Premium | |||||||||||||
| 1/4" | Stubby | 2 9/16" | 3/8" | 7/16" | Nickel-Plated Steel | Retaining Ring | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | Wera | 2787N12 | 000000 | ||
| 1/4" | Standard | 4 11/16" | 13/16" | 3/8" | Nickel-Plated Steel | Quick-Change Chuck | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | Wera | 2787N11 | 00000 | ||
Offset Bit Screwdrivers
 |
Fasten screws of different sizes and styles in tight spots. The offset head reaches into engine compartments, behind pipes or wiring, and into other spaces where a standard driver won't fit. Since their head is offset, they have gears that turn the bit when you twist the handle. Steady the shaft with one hand and turn the handle with the other.
Removable Shaft—Good for powered fastening jobs. Take the shaft out of these screwdrivers and insert it into the chuck of your drill.
Premium—The best screwdrivers available, with handles that keep you comfortable during long stretches of use. They come with high-quality bits that fit snugly into fastener recesses to turn screws quickly without slipping.
Shaft | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Sizes | Sizes Included | For Bit Hex Shank Size | Relative Lg. | Overall Lg. | Offset Angle | Lg. | Overall Wd. | Material | Bit-Holding Mechanism | Mfr. | Each | |||
Bit Screwdrivers with Bit Storage in Handle and Removable Shaft | ||||||||||||||
Premium | ||||||||||||||
| 4 | Phillips: No. 1, No. 2 Slotted: 3/16", 1/4" | 1/4" | Standard | 10" | 105° | 4 3/4" | 1" | Steel | Magnet | Spec Tools | 5332A31 | 000000 | ||
Electrical Insulating Precise-Control Screwdriver Sets
 |
Safely tweak tiny screws in capacitors, terminal blocks, and other small, energized components. An insulated handle and shaft absorb up to 1,000 volts of electric shock to meet IEC, EN, or ASTM standards. Also known as precision and miniature screwdrivers, they give you better control than a standard screwdriver for nimble, fine-tuned adjustments. Press the end of the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips.
No. of Pieces | Includes | Grip Style | Material | Specs. Met | Container Type | Each | |||
|---|---|---|---|---|---|---|---|---|---|
Torx | |||||||||
| 7 | T5 Torx Screwdriver—5 1/2" O'all Lg. T6 Torx Screwdriver—5 1/2" O'all Lg. T7 Torx Screwdriver—5 1/2" O'all Lg. T8 Torx Screwdriver—6 5/16" O'all Lg. T9 Torx Screwdriver—6 5/16" O'all Lg. T10 Torx Screwdriver—6 5/16" O'all Lg. T15 Torx Screwdriver—6 7/8" O'all Lg. | Plain | Plastic-Coated Steel | IEC 60900, EN 60900 | Plastic Case | 52985A88 | 000000 | ||
Phillips and Slotted | |||||||||
| 8 | 0.059" Slotted Screwdriver—5 15/16" O'all Lg. 0.079" Slotted Screwdriver—5 15/16" O'all Lg. 0.098" Slotted Screwdriver—6 1/2" O'all Lg. 0.118" Slotted Screwdriver—6 1/2" O'all Lg. 0.138" Slotted Screwdriver—6 1/2" O'all Lg. No. 00 Phillips Screwdriver—5 15/16" O'all Lg. No. 0 Phillips Screwdriver—6 1/2" O'all Lg. No. 1 Phillips Screwdriver—6 1/2" O'all Lg. | Plain | Plastic-Coated Steel | IEC 60900, EN 60900, ASTM F1505 | — | 52985A24 | 00000 | ||
Antislip-Grip Screwdriver Sets
 |
No. of Pieces | Includes | Material | Cap Material | Mfr. | Each | |||
|---|---|---|---|---|---|---|---|---|
Torx | ||||||||
Premium | ||||||||
| 6 | T10 Torx Screwdriver—7 3/16" O'all Lg. T15 Torx Screwdriver—7 3/16" O'all Lg. T20 Torx Screwdriver—8 1/8" O'all Lg. T25 Torx Screwdriver—8 1/8" O'all Lg. T30 Torx Screwdriver—9 1/8" O'all Lg. T40 Torx Screwdriver—9 1/2" O'all Lg. | Chrome-Plated Steel | — | Witte | 52915A69 | 000000 | ||
Phillips and Slotted | ||||||||
Premium | ||||||||
| 5 | 7/32" Slotted Screwdriver—8 1/2" O'all Lg. 1/4" Slotted Screwdriver—9 1/2" O'all Lg. 5/16" Slotted Screwdriver—10 3/4" O'all Lg. No. 1 Phillips Screwdriver—7 5/16" O'all Lg. No. 2 Phillips Screwdriver—8 1/2" O'all Lg. | Chrome-Plated Steel | Chrome-Plated Steel | Wiha | 52915A51 | 00000 | ||
| 8 | 11/64" Slotted Screwdriver—7 7/8" O'all Lg. 7/32" Slotted Screwdriver—8 3/8" O'all Lg. 1/4" Slotted Screwdriver—9 3/8" O'all Lg. 5/16" Slotted Screwdriver—10 11/16" O'all Lg. 1/2" Slotted Screwdriver—11 11/16" O'all Lg. No. 1 Phillips Screwdriver—7 5/16" O'all Lg. No. 2 Phillips Screwdriver—8 3/8" O'all Lg. No. 3 Phillips Screwdriver—10 5/8" O'all Lg. | Chrome-Plated Steel | Chrome-Plated Steel | Wiha | 52915A68 | 000000 | ||
Electrical Insulating Precise-Control Screwdrivers
 |
Safely tweak tiny screws in capacitors, terminal blocks, and other small, energized components. An insulated handle and shaft absorb up to 1,000 volts of electric shock to meet IEC, EN, or ASTM standards. Also known as precision and miniature screwdrivers, they give you better control than a standard screwdriver for nimble, fine-tuned adjustments. Press the end of the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips.
Shaft | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Drive Size | Overall Lg. | Lg. | Overall Wd. | Grip Style | Specs. Met | Each | |||
Phillips | |||||||||
Plastic-Coated Steel | |||||||||
| No. 00 | 5 15/16" | 1 5/8" | 1/8" | Plain | IEC 60900, EN 60900, ASTM F1505 | 52985A76 | 000000 | ||
| No. 0 | 6 1/2" | 2 3/8" | 3/16" | Plain | IEC 60900, EN 60900, ASTM F1505 | 52985A77 | 00000 | ||
| No. 1 | 6 1/2" | 2 3/8" | 7/32" | Plain | IEC 60900, EN 60900, ASTM F1505 | 52985A78 | 00000 | ||
Slotted | |||||||||
Plastic-Coated Steel | |||||||||
| 0.059" | 5 15/16" | 1 5/8" | 1/8" | Plain | IEC 60900, EN 60900, ASTM F1505 | 52985A71 | 00000 | ||
| 0.079" | 5 15/16" | 1 5/8" | 1/8" | Plain | IEC 60900, EN 60900, ASTM F1505 | 52985A72 | 00000 | ||
| 0.098" | 6 1/2" | 2 3/8" | 5/32" | Plain | IEC 60900, EN 60900, ASTM F1505 | 52985A73 | 00000 | ||
| 0.118" | 6 1/2" | 2 3/8" | 3/16" | Plain | IEC 60900, EN 60900, ASTM F1505 | 52985A74 | 00000 | ||
| 0.138" | 6 1/2" | 2 3/8" | 3/16" | Plain | IEC 60900, EN 60900, ASTM F1505 | 52985A75 | 00000 | ||
Torx | |||||||||
Plastic-Coated Steel | |||||||||
| T5 | 5 1/2" | 1 9/16" | 3/16" | Plain | IEC 60900, EN 60900 | 52985A81 | 00000 | ||
| T6 | 5 1/2" | 1 9/16" | 3/16" | Plain | IEC 60900, EN 60900 | 52985A82 | 00000 | ||
| T7 | 5 1/2" | 1 9/16" | 3/16" | Plain | IEC 60900, EN 60900 | 52985A83 | 00000 | ||
| T8 | 6 5/16" | 2 3/8" | 3/16" | Plain | IEC 60900, EN 60900 | 52985A84 | 00000 | ||
| T9 | 6 5/16" | 2 3/8" | 3/16" | Plain | IEC 60900, EN 60900 | 52985A85 | 00000 | ||
| T10 | 6 5/16" | 2 3/8" | 3/16" | Plain | IEC 60900, EN 60900 | 52985A86 | 00000 | ||
| T15 | 6 7/8" | 3" | 7/32" | Plain | IEC 60900, EN 60900 | 52985A87 | 00000 | ||
Precise-Fit Slotted Screwdriver Sets
 |  |
Parallel Tip |
When aesthetics matter, the screwdrivers in these sets avoid slips that leave behind scuffs and scrapes. Their tips are straight for full contact with the screw slot, and they're precision ground to thousandths of an inch in thickness. Also known as hollow-ground and gunsmith screwdrivers.
Also ideal for industrial maintenance, these no-frills sets withstand years of heavy use in the shop and on the jobsite. The hard plastic handles won't crack or wear out from drops and scrapes. They're also easy to wipe down and won't get sticky or gummy when exposed to oils or chemicals, unlike soft handles.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
No. of Pieces | Includes | Material | Mfr. | Container Type | Each | |||
|---|---|---|---|---|---|---|---|---|
Slotted | ||||||||
Premium | ||||||||
| 8 | 1/8" Slotted Screwdriver (0.023" Tip Thick.)—6 3/4" O'all Lg. 11/64" Slotted Screwdriver (0.031" Tip Thick.)—7" O'all Lg. 3/16" Slotted Screwdriver (0.032" Tip Thick.)—7" O'all Lg. 3/16" Slotted Screwdriver (0.037" Tip Thick.)—7 3/8 O'all Lg. 1/4" Slotted Screwdriver (0.041" Tip Thick.)—7 1/2" O'all Lg. 5/16" Slotted Screwdriver (0.034" Tip Thick.)—7 1/2" O'all Lg. 5/16" Slotted Screwdriver (0.037" Tip Thick.)—7 1/2" O'all Lg. 5/16" Slotted Screwdriver (0.040" Tip Thick.)—7" O'all Lg. | Black-Oxide Steel | Forster Products | Plastic Pouch | 7297A33 | 000000 | ||
Compact Screwdriver Sets
 |
A scaled-down version of our standard screwdrivers, these are shorter, slimmer, and easier to carry. Sets include a secondary handle that slips over the attached handle for extra torque and a more comfortable grip.
No. of Pieces | Includes | Material | Container Type | Each | |||
|---|---|---|---|---|---|---|---|
Hex | |||||||
| 9 | 0.028" Hex Screwdriver—3 1/2" O'all Lg. 0.035" Hex Screwdriver—3 1/2" O'all Lg. 0.050" Hex Screwdriver—3 1/2" O'all Lg. 1/16" Hex Screwdriver—3 1/2" O'all Lg. 5/64" Hex Screwdriver—3 1/2" O'all Lg. 3/32" Hex Screwdriver—3 1/2" O'all Lg. 7/64" Hex Screwdriver—3 1/2" O'all Lg. 1/8" Hex Screwdriver—3 1/2" O'all Lg. Secondary Screwdriver Handle | Black-Oxide Steel | Plastic Case | 5759A12 | 000000 | ||
| 9 | 0.89 mm Hex Screwdriver—3 1/2" O'all Lg. 1.27 mm Hex Screwdriver—3 1/2" O'all Lg. 1.5 mm Hex Screwdriver—3 1/2" O'all Lg. 2 mm Hex Screwdriver—3 1/2" O'all Lg. 2.5 mm Hex Screwdriver—3 1/2" O'all Lg. 3 mm Hex Screwdriver—3 1/2" O'all Lg. 4 mm Hex Screwdriver—3 1/2" O'all Lg. 5 mm Hex Screwdriver—3 1/2" O'all Lg. Secondary Screwdriver Handle | Black-Oxide Steel | Plastic Case | 5759A13 | 00000 | ||
Phillips and Slotted | |||||||
| 9 | 3/32" Slotted Screwdriver—3 1/2" O'all Lg. 1/8" Slotted Screwdriver—3 1/2" O'all Lg. 5/32" Slotted Screwdriver—3 1/2" O'all Lg. 3/16" Slotted Screwdriver—3 1/2" O'all Lg. 1/4" Slotted Screwdriver—3 1/2" O'all Lg. Secondary Screwdriver Handle No. 0 Phillips Screwdriver—3 1/2" O'all Lg. No. 1 Phillips Screwdriver—3 1/2" O'all Lg. No. 2 Phillips Screwdriver—3 1/2" O'all Lg. | Zinc-Plated Steel | Plastic Case | 7032A11 | 00000 | ||
High-Visibility Screwdrivers
 |  |
Shaft | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Drive Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Material | Mfr. | Choose a Handle Color | Each | |||
Phillips | |||||||||||
Premium | |||||||||||
| No. 0 | Standard | 6 1/4" | 3" | 1/8" | Black-Oxide Steel | Mayhew | Fluorescent Green, Fluorescent Orange | 56805A11 | 00000 | ||
| No. 1 | Standard | 6 1/2" | 3" | 3/16" | Black-Oxide Steel | Mayhew | Fluorescent Green, Fluorescent Orange | 56805A55 | 0000 | ||
| No. 2 | Stubby | 3 3/4" | 1 1/2" | 1/4" | Black-Oxide Steel | Mayhew | Fluorescent Green, Fluorescent Orange | 56805A12 | 0000 | ||
| No. 2 | Standard | 8 1/4" | 4" | 1/4" | Black-Oxide Steel | Mayhew | Fluorescent Green, Fluorescent Orange | 56805A56 | 00000 | ||
| No. 2 | Long | 10 1/4" | 6" | 1/4" | Black-Oxide Steel | Mayhew | Fluorescent Green, Fluorescent Orange | 56805A31 | 00000 | ||
| No. 3 | Standard | 10 3/4" | 6" | 5/16" | Black-Oxide Steel | Mayhew | Fluorescent Green, Fluorescent Orange | 56805A57 | 00000 | ||
Slotted | |||||||||||
Premium | |||||||||||
| 1/8" | Standard | 6 1/4" | 3" | 1/8" | Black-Oxide Steel | Mayhew | Fluorescent Green, Fluorescent Orange | 56805A13 | 0000 | ||
| 3/16" | Standard | 6 1/2" | 3" | 3/16" | Black-Oxide Steel | Mayhew | Fluorescent Green, Fluorescent Orange | 56805A21 | 0000 | ||
| 3/16" | Long | 9 1/2" | 6" | 3/16" | Black-Oxide Steel | Mayhew | Fluorescent Green, Fluorescent Orange | 56805A22 | 00000 | ||
| 3/16" | Long | 11 1/2" | 8" | 3/16" | Black-Oxide Steel | Mayhew | Fluorescent Green | 56805A242 | 00000 | ||
| 3/16" | Long | 13 1/2" | 10" | 3/16" | Black-Oxide Steel | Mayhew | Fluorescent Green, Fluorescent Orange | 56805A25 | 00000 | ||
| 1/4" | Stubby | 3 3/4" | 1 1/2" | 1/4" | Black-Oxide Steel | Mayhew | Fluorescent Green, Fluorescent Orange | 56805A14 | 0000 | ||
| 1/4" | Standard | 8 1/4" | 4" | 1/4" | Black-Oxide Steel | Mayhew | Fluorescent Green, Fluorescent Orange | 56805A33 | 00000 | ||
| 1/4" | Long | 10 1/4" | 6" | 1/4" | Black-Oxide Steel | Mayhew | Fluorescent Green, Fluorescent Orange | 56805A28 | 00000 | ||
| 5/16" | Standard | 10 3/4" | 6" | 5/16" | Black-Oxide Steel | Mayhew | Fluorescent Green, Fluorescent Orange | 56805A34 | 00000 | ||
| 3/8" | Standard | 13" | 8" | 19/32" | Black-Oxide Steel | Mayhew | Fluorescent Green, Fluorescent Orange | 56805A35 | 00000 | ||
| 3/8" | Long | 15" | 10" | 19/32" | Black-Oxide Steel | Mayhew | Fluorescent Orange | 56805A291 | 00000 | ||
Torx | |||||||||||
Premium | |||||||||||
| T6 | Standard | 4 3/4" | 2" | 1/8" | Black-Oxide Steel | Mayhew | Fluorescent Green, Fluorescent Orange | 56805A15 | 00000 | ||
| T8 | Standard | 5 3/4" | 2 1/2" | 1/8" | Black-Oxide Steel | Mayhew | Fluorescent Green, Fluorescent Orange | 56805A16 | 00000 | ||
| T10 | Standard | 7" | 3" | 3/16" | Black-Oxide Steel | Mayhew | Fluorescent Green, Fluorescent Orange | 56805A17 | 00000 | ||
| T15 | Standard | 7" | 3" | 3/16" | Black-Oxide Steel | Mayhew | Fluorescent Green, Fluorescent Orange | 56805A18 | 00000 | ||
| T20 | Standard | 7" | 4" | 3/16" | Black-Oxide Steel | Mayhew | Fluorescent Green, Fluorescent Orange | 56805A19 | 00000 | ||
| T25 | Standard | 8" | 4" | 3/16" | Black-Oxide Steel | Mayhew | Fluorescent Green, Fluorescent Orange | 56805A32 | 00000 | ||
Ball-Tip Screwdriver Sets
|  |
Turn a variety of screws even when you can't access them head on. The screwdrivers in these sets are handy in corners and underneath machinery because their ball tip can engage fasteners at an angle. While they're great for most fastening jobs, the tips make less contact with fastener recesses than standard, straight tips and may snap off under extremely high torque.
The handles on these drivers have a rubberized, cushioned grip over a hard plastic core for comfort and control.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
No. of Pieces | Includes | Max. Access Angle | Material | Mfr. | Container Type | Each | |||
|---|---|---|---|---|---|---|---|---|---|
Hex | |||||||||
Premium | |||||||||
| 7 | 1.5 mm Hex Screwdriver—4 3/4" O'all Lg. 2 mm Hex Screwdriver—5" O'all Lg. 2.5 mm Hex Screwdriver—5 1/8" O'all Lg. 3 mm Hex Screwdriver—6 3/4" O'all Lg. 4 mm Hex Screwdriver—8 1/4" O'all Lg. 5 mm Hex Screwdriver—8 3/4" O'all Lg. 6 mm Hex Screwdriver—10 1/4" O'all Lg. | 25° | Phosphate-Coated Steel | Bondhus | Plastic Pouch | 5709A58 | 000000 | ||
| 7 | 5/64" Hex Screwdriver—4 13/16" O'all Lg. 3/32" Hex Screwdriver—5 1/4" O'all Lg. 7/64" Hex Screwdriver—5 5/16" O'all Lg. 1/8" Hex Screwdriver—6 5/8" O'all Lg. 9/64" Hex Screwdriver—6 13/16" O'all Lg. 5/32" Hex Screwdriver—7 15/16" O'all Lg. 3/16" Hex Screwdriver—8" O'all Lg. | 25° | Phosphate-Coated Steel | Bondhus | Plastic Pouch | 5709A39 | 00000 | ||
| 8 | 0.050" Hex Screwdriver—4 1/8" O'all Lg. 1/16" Hex Screwdriver—4 3/4" O'all Lg. 5/64" Hex Screwdriver—4 13/16" O'all Lg. 3/32" Hex Screwdriver—5 1/4" O'all Lg. 7/64" Hex Screwdriver—5 5/16" O'all Lg. 1/8" Hex Screwdriver—6 5/8" O'all Lg. 9/64" Hex Screwdriver—6 13/16" O'all Lg. 5/32" Hex Screwdriver—7 15/16" O'all Lg. | 25° | Phosphate-Coated Steel | Bondhus | Plastic Pouch | 5709A38 | 00000 | ||
| 8 | 7/64" Hex Screwdriver—5 5/16" O'all Lg. 1/8" Hex Screwdriver—6 5/8" O'all Lg. 9/64" Hex Screwdriver—6 13/16" O'all Lg. 5/32" Hex Screwdriver—7 15/16" O'all Lg. 3/16" Hex Screwdriver—8" O'all Lg. 7/32" Hex Screwdriver—9" O'all Lg. 1/4" Hex Screwdriver—9 3/4" O'all Lg. 5/16" Hex Screwdriver—10 1/2" O'all Lg. | 25° | Phosphate-Coated Steel | Bondhus | Plastic Pouch | 5709A41 | 00000 | ||
| 8 | 2 mm Hex Screwdriver—6 1/4" O'all Lg. 2.5 mm Hex Screwdriver—6 3/4" O'all Lg. 3 mm Hex Screwdriver—9 3/4" O'all Lg. 4 mm Hex Screwdriver—11 1/2" O'all Lg. 5 mm Hex Screwdriver—12 1/4" O'all Lg. 6 mm Hex Screwdriver—13 1/2" O'all Lg. 8 mm Hex Screwdriver—14 1/4" O'all Lg. 10 mm Hex Screwdriver—15" O'all Lg. | 25° | Phosphate-Coated Steel | Bondhus | Plastic Pouch | 5709A33 | 00000 | ||
| 9 | 1.5 mm Hex Screwdriver—4 3/4" O'all Lg. 2 mm Hex Screwdriver—5" O'all Lg. 2.5 mm Hex Screwdriver—5 1/8" O'all Lg. 3 mm Hex Screwdriver—6 3/4" O'all Lg. 4 mm Hex Screwdriver—8 1/4" O'all Lg. 5 mm Hex Screwdriver—8 3/4" O'all Lg. 6 mm Hex Screwdriver—10 1/4" O'all Lg. 8 mm Hex Screwdriver—11 1/4" O'all Lg. 10 mm Hex Screwdriver—12 1/4" O'all Lg. | 25° | Phosphate-Coated Steel | Bondhus | Plastic Pouch | 5709A32 | 00000 | ||
| 11 | 5/64" Hex Screwdriver—4 13/16" O'all Lg. 3/32" Hex Screwdriver—5 1/4" O'all Lg. 7/64" Hex Screwdriver—5 5/16" O'all Lg. 1/8" Hex Screwdriver—6 5/8" O'all Lg. 9/64" Hex Screwdriver—6 13/16" O'all Lg. 5/32" Hex Screwdriver—7 15/16" O'all Lg. 3/16" Hex Screwdriver—8" O'all Lg. 7/32" Hex Screwdriver—9" O'all Lg. 1/4" Hex Screwdriver—9 3/4" O'all Lg. 5/16" Hex Screwdriver—10 1/2" O'all Lg. 3/8" Hex Screwdriver—11 1/4" O'all Lg. | 25° | Phosphate-Coated Steel | Bondhus | Plastic Pouch | 5709A23 | 00000 | ||
| 11 | 5/64" Hex Screwdriver—6 1/2" O'all Lg. 3/32" Hex Screwdriver—7 1/4" O'all Lg. 7/64" Hex Screwdriver—8 1/2" O'all Lg. 1/8" Hex Screwdriver—10" O'all Lg. 9/64" Hex Screwdriver—10 1/2" O'all Lg. 5/32" Hex Screwdriver—11 3/4" O'all Lg. 3/16" Hex Screwdriver—12 1/4" O'all Lg. 7/32" Hex Screwdriver—13 1/4" O'all Lg. 1/4" Hex Screwdriver—13 3/4" O'all Lg. 5/16" Hex Screwdriver—14 1/4" O'all Lg. 3/8" Hex Screwdriver—14 3/4" O'all Lg. | 25° | Phosphate-Coated Steel | Bondhus | Plastic Pouch | 5709A35 | 00000 | ||
| 13 | 0.050" Hex Screwdriver—4 1/8" O'all Lg. 1/16" Hex Screwdriver—4 3/4" O'all Lg. 5/64" Hex Screwdriver—4 13/16" O'all Lg. 3/32" Hex Screwdriver—5 1/4" O'all Lg. 7/64" Hex Screwdriver—5 5/16" O'all Lg. 1/8" Hex Screwdriver—6 5/8" O'all Lg. 9/64" Hex Screwdriver—6 13/16" O'all Lg. 5/32" Hex Screwdriver—7 15/16" O'all Lg. 3/16" Hex Screwdriver—8" O'all Lg. 7/32" Hex Screwdriver—9" O'all Lg. 1/4" Hex Screwdriver—9 3/4" O'all Lg. 5/16" Hex Screwdriver—10 1/2" O'all Lg. 3/8" Hex Screwdriver—11 1/4" O'all Lg. | 25° | Phosphate-Coated Steel | Bondhus | Plastic Pouch | 5709A31 | 00000 | ||
Torx | |||||||||
Premium | |||||||||
| 8 | T9 Torx Screwdriver—5" O'all Lg. T10 Torx Screwdriver—5 1/4" O'all Lg. T15 Torx Screwdriver—6 7/16" O'all Lg. T20 Torx Screwdriver—7 1/2" O'all Lg. T25 Torx Screwdriver—7 3/4" O'all Lg. T27 Torx Screwdriver—8 3/4" O'all Lg. T30 Torx Screwdriver—9" O'all Lg. T40 Torx Screwdriver—9 1/2" O'all Lg. | 20° | Phosphate-Coated Steel | Bondhus | Plastic Pouch | 37455A33 | 00000 | ||
Square | |||||||||
Premium | |||||||||
| 4 | No. 0 Square Screwdriver—7" O'all Lg. No. 1 Square Screwdriver—7 1/4" O'all Lg. No. 2 Square Screwdriver—8 1/4" O'all Lg. No. 3 Square Screwdriver—8 1/4" O'all Lg. | 25° | Phosphate-Coated Steel | Bondhus | Plastic Pouch | 53315A21 | 00000 | ||
Adjustable-Length Screwdriver Sets
 |
Slide the shaft in or out of the handle to get the exact length you need. These sets can tackle the same variety of jobs as standard screwdriver sets, but they’re less bulky. Press down on the collar to adjust the length or swap shafts. The shafts are also reversible, so you can flip them around for a different size.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
Screwdrivers | Replacement Handles | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Sizes | Sizes Included | Relative Lg. | Overall Lg. | Material | Mfr. | Each | Each | ||||
Screwdrivers in Canvas Roll-Up Pouch | |||||||||||
Premium | |||||||||||
| 8 | Phillips: No. 1, No. 2 Slotted: 9/64", 3/16", 7/32", 17/64" Square: No. 1, No. 2 | Standard | 6 1/4" to 9 1/4" | Chrome-Plated Steel | Wiha | 2257A4 | 000000 | 2257A43 | 000000 | ||
| 10 | Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15, T20, T25, T30, T40 | Standard | 6 1/4" to 9 1/4" | Chrome-Plated Steel | Wiha | 2257A5 | 00000 | 2257A43 | 00000 | ||
| 18 | Phillips: No. 1, No. 2 Slotted: ¹¹⁄₆₄", ¼" Hex: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16" Torx: T6, T7, T8, T9, T10, T15, T20, T25 | Standard | 6 1/4" to 9 1/4" | Chrome-Plated Steel | Wiha | 2257A41 | 00000 | 2257A43 | 00000 | ||
| 28 | Phillips: No. 1, No. 2 Slotted: 9/64", 3/16", 7/32", 17/64" Hex: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16" Hex: 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15, T20, T25, T30, T40 | Standard | 6 1/4" to 9 1/4" | Chrome-Plated Steel | Wiha | 2257A6 | 000000 | 2257A43 | 00000 | ||
| 48 | Phillips: No. 0, No. 1, No. 2 Slotted: 1/8", 9/64", ¹¹⁄₆₄", 3/16", 7/32", ¼", ¹⁷⁄₆₄" Hex: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16" Hex: 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15, T20, T25, T30, T40 Square: No. 1, No. 2 Nutdriver: ¼", ⁹⁄₃₂", ⁵⁄₁₆", ¹¹⁄₃₂", ⅜", ⁷⁄₁₆", ½" Nutdriver: 5.5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm | Standard | 6 1/4" to 9 1/4" | Chrome-Plated Steel | Wiha | 2257A42 | 000000 | 2257A43 | 00000 | ||
Static-Control Screwdriver Sets
 |
Fasten screws of various sizes on circuit boards and other sensitive electronics, while preventing harmful static shocks. Also known as ESD-safe screwdrivers, these tools meet IEC requirements to drain static away from your workpiece before it causes damage.
The handles on these drivers are made from a combination of soft, grippy plastic for high torque and smooth, hard plastic for quick grip adjustments and high-speed turning. They're also contoured to maximize comfort and minimize hand strain, fatigue, and blisters, even with extended use.
Warning: These screwdrivers conduct electricity. Do not use them near active power sources.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
No. of Pieces | Includes | Material | Static Control Rating | Surface Resistivity | Mfr. | Specs. Met | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|
Torx | ||||||||||
Premium | ||||||||||
| 6 | T6 Torx Screwdriver—6 1/2" O'all Lg. T8 Torx Screwdriver—6 1/2" O'all Lg. T9 Torx Screwdriver—6 3/4" O'all Lg. T10 Torx Screwdriver—7 1/2" O'all Lg. T15 Torx Screwdriver—7 1/2" O'all Lg. T20 Torx Screwdriver—8 1/4" O'all Lg. | Chrome-Plated Steel | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | Wiha | IEC 61340-5-1 | 54445A52 | 000000 | ||
Phillips and Slotted | ||||||||||
Premium | ||||||||||
| 6 | 1/8" Slotted Screwdriver—8" O'all Lg. 5/32" Slotted Screwdriver—8 1/4" O'all Lg. 7/32" Slotted Screwdriver—9 1/4" O'all Lg. No. 0 Phillips Screwdriver—6 1/2" O'all Lg. No. 1 Phillips Screwdriver—7 1/2" O'all Lg. No. 2 Phillips Screwdriver—8 1/2" O'all Lg. | Chrome-Plated Steel | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | Wiha | IEC 61340-5-1 | 54445A51 | 00000 | ||
Precise-Fit Slotted Screwdrivers
|
Parallel Tip |
 |
When aesthetics matter, avoid screwdriver slips that leave behind scuffs and scrapes. The tip on these drivers is straight for full contact with the screw slot, and it's precision ground to thousandths of an inch in thickness. Also known as hollow-ground and gunsmith screwdrivers.
Also ideal for industrial maintenance, these no-frills screwdrivers withstand years of heavy use in the shop and on the jobsite. The hard plastic handle won't crack or wear out from drops and scrapes. It's also easy to wipe down and won't get sticky or gummy when exposed to oils or chemicals, unlike a soft handle.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
Standard Length—The most common screwdriver length for a specific drive size.
Shaft | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Drive Size | Tip Thk. | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Material | Mfr. | Each | |||
Slotted | |||||||||||
Premium | |||||||||||
| 1/8" | 0.023" | Standard | 6 3/4" | 4" | 1/8" | Black-Oxide Steel | Forster Products | 7297A11 | 000000 | ||
| 11/64" | 0.031" | Standard | 7" | 4" | 3/16" | Black-Oxide Steel | Forster Products | 7297A23 | 00000 | ||
| 3/16" | 0.032" | Standard | 7" | 4" | 3/16" | Black-Oxide Steel | Forster Products | 7297A12 | 00000 | ||
| 3/16" | 0.037" | Standard | 7" | 4" | 3/16" | Black-Oxide Steel | Forster Products | 7297A13 | 00000 | ||
| 1/4" | 0.041" | Standard | 7 3/8" | 4" | 1/4" | Black-Oxide Steel | Forster Products | 7297A14 | 00000 | ||
| 5/16" | 0.034" | Standard | 7 1/2" | 4" | 5/16" | Black-Oxide Steel | Forster Products | 7297A15 | 00000 | ||
| 5/16" | 0.037" | Standard | 7 1/2" | 4" | 5/16" | Black-Oxide Steel | Forster Products | 7297A21 | 00000 | ||
| 5/16" | 0.040" | Standard | 7 1/2" | 4" | 5/16" | Black-Oxide Steel | Forster Products | 7297A22 | 00000 | ||
Screw-Holding Precise-Control Screwdrivers
Changeable-Shaft Ceramic Adjustment Screwdrivers
 |
No. of Sizes | Sizes Included | Relative Lg. | Overall Lg. | Material | Mfr. | Each | |||
|---|---|---|---|---|---|---|---|---|---|
Premium | |||||||||
| 4 | Phillips: No. 0, 1.7 mm Slotted: 0.035", 0.071" | Standard | 6" | Ceramic | Aven Tool | 5879A45 | 000000 | ||
Precise-Control Bit Screwdrivers without Bits
Offset Ratcheting Screwdrivers
Cushion-Grip Electrical Insulating Screwdrivers
 |
|
Standard Insulated Shaft |
With an iconic cushioned grip over a hard plastic core, these screwdrivers prevent dangerous zaps around live circuits. The rubberized, insulated handle absorbs up to 1,000 volts to meet ASTM and IEC standards. Use these drivers to repair or install electrical panels, outlets, switches, and light fixtures.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
Standard Length—The most common screwdriver length for a specific drive size.
Long—An extended shaft turns screws in deep recesses other screwdrivers can't reach.
Shaft | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Drive Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Insulated Shaft Type | Material | Mfr. | Specs. Met | Each | |||
Phillips | ||||||||||||
Premium | ||||||||||||
| No. 1 | Long | 10 1/4" | 6" | 1/4" | Standard | Plastic-Coated Steel | Klein Tools | IEC 60900, ASTM F1505 | 3191N13 | 000000 | ||
| No. 2 | Standard | 8 1/4" | 4" | 5/16" | Standard | Plastic-Coated Steel | Klein Tools | IEC 60900, ASTM F1505 | 3191N14 | 00000 | ||
| No. 2 | Long | 10 1/4" | 6" | 5/16" | Standard | Plastic-Coated Steel | Klein Tools | IEC 60900, ASTM F1505 | 3191N15 | 00000 | ||
| No. 2 | Long | 24" | 20" | 1/2" | Standard | Plastic-Coated Steel | Cementex | IEC 60900, ASTM F1505 | 3191N11 | 00000 | ||
| No. 3 | Standard | 11" | 6" | 3/8" | Standard | Plastic-Coated Steel | Klein Tools | IEC 60900, ASTM F1505 | 3191N16 | 00000 | ||
Slotted | ||||||||||||
Premium | ||||||||||||
| 3/16" | Long | 10 1/4" | 6" | 1/4" | Standard | Plastic-Coated Steel | Klein Tools | IEC 60900, ASTM F1505 | 3191N17 | 00000 | ||
| 1/4" | Long | 10 1/4" | 6" | 5/16" | Standard | Plastic-Coated Steel | Klein Tools | IEC 60900, ASTM F1505 | 3191N18 | 00000 | ||
| 1/4" | Long | 24" | 20" | 1/2" | Standard | Plastic-Coated Steel | Cementex | IEC 60900, ASTM F1505 | 3191N12 | 00000 | ||
| 5/16" | Standard | 11" | 6" | 3/8" | Standard | Plastic-Coated Steel | Klein Tools | IEC 60900, ASTM F1505 | 3191N19 | 00000 | ||
Square | ||||||||||||
Premium | ||||||||||||
| No. 1 | Long | 10 1/4" | 6" | 5/16" | Standard | Plastic-Coated Steel | Klein Tools | IEC 60900, ASTM F1505 | 3191N21 | 00000 | ||
| No. 2 | Long | 10 1/4" | 6" | 5/16" | Standard | Plastic-Coated Steel | Klein Tools | IEC 60900, ASTM F1505 | 3191N22 | 00000 | ||
Bit Ratchets
 |
Retaining-Ring Bit Holder |
 |
Magnet Bit Holder |
Swing these bit ratchets like a wrench to quickly spin screws in tight or angled spots. Use them to reach screws in engine compartments and other areas with cramped overhead spaces. A built-in ratchet ensures you don’t have to lift and reposition your tool with every turn. Bits are not included.
Premium—The best screwdrivers available, with handles that keep you comfortable during long stretches of use.
Static-Control Screwdrivers
 |
Shaft | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Drive Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Material | Static Control Rating | Surface Resistivity | Mfr. | Specs. Met | Each | |||
Phillips | |||||||||||||
Premium | |||||||||||||
| No. 0 | Standard | 6 1/2" | 2 7/16" | 1/8" | Chrome-Plated Steel | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | Wiha | IEC 61340-5-1 | 54445A21 | 00000 | ||
| No. 1 | Standard | 7 1/2" | 3 1/8" | 3/16" | Chrome-Plated Steel | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | Wiha | IEC 61340-5-1 | 54445A22 | 0000 | ||
| No. 2 | Standard | 8 1/2" | 4" | 1/4" | Chrome-Plated Steel | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | Wiha | IEC 61340-5-1 | 54445A44 | 00000 | ||
Slotted | |||||||||||||
Premium | |||||||||||||
| 3/32" | Standard | 6 7/8" | 3" | 3/32" | Chrome-Plated Steel | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | Wiha | IEC 61340-5-1 | 54445A111 | 0000 | ||
| 1/8" | Standard | 8" | 3 15/16" | 1/8" | Chrome-Plated Steel | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | Wiha | IEC 61340-5-1 | 54445A11 | 0000 | ||
| 5/32" | Standard | 8 1/4" | 3 15/16" | 5/32" | Chrome-Plated Steel | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | Wiha | IEC 61340-5-1 | 54445A12 | 0000 | ||
| 7/32" | Standard | 9 1/4" | 5" | 7/32" | Chrome-Plated Steel | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | Wiha | IEC 61340-5-1 | 54445A34 | 00000 | ||
| 1/4" | Standard | 10 1/2" | 6" | 1/4" | Chrome-Plated Steel | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | Wiha | IEC 61340-5-1 | 54445A36 | 00000 | ||
Torx | |||||||||||||
Premium | |||||||||||||
| T6 | Standard | 6 7/16" | 2 3/8" | 1/8" | Chrome-Plated Steel | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | Wiha | IEC 61340-5-1 | 54445A115 | 0000 | ||
| T8 | Standard | 6 7/16" | 2 3/8" | 1/8" | Chrome-Plated Steel | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | Wiha | IEC 61340-5-1 | 54445A116 | 0000 | ||
| T9 | Standard | 6 11/16" | 2 3/8" | 5/32" | Chrome-Plated Steel | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | Wiha | IEC 61340-5-1 | 54445A117 | 0000 | ||
| T10 | Standard | 7 1/2" | 3 5/32" | 5/32" | Chrome-Plated Steel | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | Wiha | IEC 61340-5-1 | 54445A118 | 0000 | ||
| T15 | Standard | 7 1/2" | 3 5/32" | 5/32" | Chrome-Plated Steel | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | Wiha | IEC 61340-5-1 | 54445A119 | 0000 | ||
| T20 | Standard | 8 5/16" | 4" | 5/32" | Chrome-Plated Steel | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | Wiha | IEC 61340-5-1 | 54445A121 | 0000 | ||
Precise-Control Ball-Tip Screwdrivers
|  |
Shaft | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Drive Size | Overall Lg. | Lg. | Overall Wd. | Max. Access Angle | Grip Style | Each | |||
Hex | |||||||||
Chrome-Plated Steel | |||||||||
| 0.050", 1.27 mm | 4 3/4" | 1 5/8" | 1/8" | 20° | Plain | 7268A51 | 00000 | ||
| 1/16" | 5 3/4" | 2" | 1/8" | 20° | Plain | 7268A52 | 0000 | ||
| 5/64" | 5 3/4" | 2" | 1/8" | 20° | Plain | 7268A53 | 0000 | ||
| 3/32" | 5 3/4" | 2" | 1/8" | 20° | Plain | 7268A54 | 0000 | ||
| 7/64" | 6 3/4" | 2 3/8" | 5/32" | 20° | Plain | 7268A55 | 0000 | ||
| 1/8" | 6 3/4" | 2 3/8" | 5/32" | 20° | Plain | 7268A56 | 0000 | ||
| 9/64" | 6 3/4" | 2 3/8" | 5/32" | 20° | Plain | 7268A57 | 0000 | ||
| 5/32" | 6 3/4" | 2 3/8" | 3/16" | 20° | Plain | 7268A58 | 0000 | ||
| 1.5 mm | 5 3/4" | 2" | 1/8" | 20° | Plain | 55035A42 | 0000 | ||
| 2 mm | 5 3/4" | 2" | 1/8" | 20° | Plain | 55035A43 | 0000 | ||
| 2.5 mm | 6 3/4" | 2 3/8" | 1/8" | 20° | Plain | 55035A44 | 0000 | ||
| 3 mm | 6 3/4" | 2 3/8" | 5/32" | 20° | Plain | 55035A45 | 0000 | ||
Fingertip Ratcheting Bit Screwdrivers
 |  |
Don't overtighten screws—feel the resistance from fasteners in your fingertips. A ratchet built into the handle of these screwdrivers eliminates the need to release and regrip the tool between turns. Flip a lever on the handle to switch the ratcheting direction. These screwdrivers come with bits to drive multiple screw styles and sizes.
Premium—The best screwdrivers available, with handles that keep you comfortable during long stretches of use. They come with high-quality bits that fit snugly into fastener recesses to turn screws quickly without slipping.
Stubby—An extra-short handle and shaft squeeze behind mounted equipment and inside small panels.
Shaft | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Sizes | Sizes Included | For Bit Hex Shank Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Material | Bit-Holding Mechanism | Mfr. | Each | |||
Bit Screwdrivers with Bit Storage in Case | |||||||||||||
Premium | |||||||||||||
| 4 | Phillips: No. 1, No. 2 Slotted: 1/4" Square Drive: 1/4" | 1/4" | Stubby | 2 7/8" | 2 3/8" | 3/8" | Stainless Steel | Magnet | Lang Tools | 52815A22 | 000000 | ||
Nonmagnetic Screwdrivers
 |
Shaft | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Drive Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Material | Mfr. | Each | |||
Phillips | ||||||||||
Premium | ||||||||||
| No. 0 | Standard | 5 1/4" | 3" | 1/8" | Titanium | Imprex International | 54035A81 | 000000 | ||
| No. 1 | Standard | 6 1/4" | 3" | 3/16" | Titanium | Imprex International | 54035A82 | 00000 | ||
| No. 2 | Stubby | 3 1/4" | 1 1/2" | 1/4" | Titanium | Imprex International | 54035A43 | 00000 | ||
| No. 2 | Long | 9 1/4" | 6" | 1/4" | Titanium | Imprex International | 54035A83 | 00000 | ||
| No. 3 | Standard | 9 3/4" | 6" | 5/16" | Titanium | Imprex International | 54035A85 | 00000 | ||
Slotted | ||||||||||
Premium | ||||||||||
| 3/32" | Standard | 5 1/4" | 3" | 3/32" | Titanium | Imprex International | 54035A21 | 00000 | ||
| 3/32" | Long | 8 1/2" | 6" | 3/32" | Titanium | Imprex International | 54035A71 | 00000 | ||
| 1/8" | Standard | 4 1/4" | 2" | 1/8" | Titanium | Imprex International | 54035A22 | 00000 | ||
| 1/8" | Long | 8 1/2" | 6" | 1/8" | Titanium | Imprex International | 54035A72 | 00000 | ||
| 1/8" | Long | 14 1/4" | 12" | 1/8" | Titanium | Imprex International | 54035A23 | 00000 | ||
| 3/16" | Standard | 9 1/4" | 6" | 3/16" | Titanium | Imprex International | 54035A73 | 00000 | ||
| 1/4" | Stubby | 3 1/2" | 1 1/2" | 1/4" | Titanium | Imprex International | 54035A24 | 00000 | ||
| 1/4" | Standard | 8 1/4" | 5" | 1/4" | Titanium | Imprex International | 54035A74 | 00000 | ||
| 1/4" | Long | 15 1/2" | 12" | 1/4" | Titanium | Imprex International | 54035A34 | 00000 | ||
| 5/16" | Standard | 9 3/4" | 6" | 5/16" | Titanium | Imprex International | 54035A75 | 00000 | ||
| 3/8" | Standard | 13" | 9" | 3/8" | Titanium | Imprex International | 54035A77 | 00000 | ||
Hex | ||||||||||
Premium | ||||||||||
| 2 mm | Standard | 4 3/4" | 3" | 3/32" | Titanium | Imprex International | 54035A12 | 00000 | ||
| 3 mm | Standard | 5 1/4" | 3" | 5/32" | Titanium | Imprex International | 54035A13 | 00000 | ||
| 4 mm | Standard | 6 1/4" | 3" | 3/16" | Titanium | Imprex International | 54035A14 | 00000 | ||
| 5 mm | Standard | 6 1/4" | 3" | 1/4" | Titanium | Imprex International | 54035A15 | 00000 | ||
| 6 mm | Standard | 7 1/4" | 4" | 5/16" | Titanium | Imprex International | 54035A16 | 00000 | ||
| 7 mm | Standard | 7 1/4" | 4" | 3/8" | Titanium | Imprex International | 54035A17 | 000000 | ||
| 8 mm | Standard | 7 1/2" | 6" | 3/8" | Titanium | Imprex International | 54035A18 | 000000 | ||
T-Handle Ratcheting Bit Screwdrivers
 |  |
Bit Screwdrivers | Bit Screwdrivers with Bit Storage in Pouch |
Ease hand strain with smooth, steady motion and a natural grip as you turn a variety of screws. These screwdrivers have a wide T-shaped handle that keeps your wrist in a comfortable, neutral position and lets you lean into the driver. A built-in ratchet eliminates the need to reposition your grip with every turn. Twist a collar on the handle or flip the lever to change the ratcheting direction.
Premium—The best screwdrivers available, with handles that keep you comfortable during long stretches of use. They come with high-quality bits that fit snugly into fastener recesses to turn screws quickly without slipping.
Stubby—An extra-short handle and shaft squeeze behind mounted equipment and inside small panels.
Shaft | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Sizes | Sizes Included | For Bit Hex Shank Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Material | Bit-Holding Mechanism | Mfr. | Each | |||
Bit Screwdrivers | |||||||||||||
Premium | |||||||||||||
| 1 | Phillips: No. 2 | 1/4" | Stubby | 3 7/8" | 2" | 3/8" | Stainless Steel | Magnet | Williams | 6541A11 | 000000 | ||
| 1 | Phillips: No. 2 | 1/4" | Standard | 5 13/16" | 3 7/8" | 3/8" | Stainless Steel | Magnet | Williams | 6541A12 | 00000 | ||
| 1 | Phillips: No. 2 | 1/4" | Long | 9 3/4" | 7 7/8" | 3/8" | Stainless Steel | Magnet | Williams | 6541A13 | 00000 | ||
Bit Screwdrivers with Bit Storage in Pouch | |||||||||||||
Premium | |||||||||||||
| 16 | Phillips: No. 2, No. 3 Slotted: 7/32" Hex: 1/8", 5/32", 3/16", 7/32", 1/4" Torx: T10, T15, T20, T25, T30, T40 Square: No. 2, No. 3 | 1/4" | Standard | 5 3/4" | 1 3/4" | 3/8" | Nickel-Plated Steel | Quick-Change Chuck | Wera | 9863N22 | 000000 | ||
Screw-Holding Precise-Control Screwdriver Sets
 |
Keep even the smallest screws from falling into cracks. A magnet at the tip grips fasteners tightly, so you don't have to fumble with your fingers. These sets are perfect for delicate tasks that require nimble, fine-tuned adjustments. Push the end of the handle to open the jaws, then release to lock the jaws around the screw head.
Knurled Grip—Get the best possible grip, even with wet or oily fingers.
No. of Pieces | Includes | Screw-Holding Mechanism | Grip Texture | Grip Style | Material | Container Type | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|
Phillips | ||||||||||
| 5 | Screwdriver Handle No. 000 Phillips Shaft—4" O'all Lg. No. 00 Phillips Shaft—4" O'all Lg. No. 0 Phillips Shaft—4" O'all Lg. No. 1 Phillips Shaft—4" O'all Lg. | Magnet | Knurled | Plain | Black-Oxide Steel | Plastic Pouch | 8550A63 | 000000 | ||
Slotted | ||||||||||
| 7 | 0.025" Slotted Shaft—4" O'all Lg. 0.040" Slotted Shaft—4" O'all Lg. 0.055" Slotted Shaft—4" O'all Lg. 0.070" Slotted Shaft—4" O'all Lg. 0.080" Slotted Shaft—4" O'all Lg. 0.100" Slotted Shaft—4" O'all Lg. Screwdriver Handle | Magnet | Knurled | Plain | Black-Oxide Steel | Plastic Pouch | 8550A62 | 00000 | ||
Phillips and Slotted | ||||||||||
| 6 | 0.055" Slotted Shaft—4" O'all Lg. 0.070" Slotted Shaft—4" O'all Lg. 0.100" Slotted Shaft—4" O'all Lg. Screwdriver Handle No. 0 Phillips Shaft—4" O'all Lg. No. 1 Phillips Shaft—4" O'all Lg. | Magnet | Knurled | Plain | Black-Oxide Steel | Plastic Pouch | 8550A54 | 00000 | ||
Wire-Forming Screwdrivers
 |
 |
Why waste time shaping wire by hand? When you turn these screwdrivers, a built-in stud bends the wire into a loop that fits terminals and switches perfectly.
These iconic drivers have a rubberized, cushioned grip over a hard plastic core for comfort and control.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
Standard Length—The most common screwdriver length for a specific drive size.
Long—An extended shaft turns screws in deep recesses other screwdrivers can't reach.
Shaft | For Wire | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Drive Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Gauge | Dia. | Material | Mfr. | Each | |||
Phillips | ||||||||||||
Premium | ||||||||||||
| No. 2 | Standard | 8 1/4" | 4" | 1/4" | 14, 12, 10 | 0.064" to 0.102" | Chrome-Plated Steel | Klein Tools | 5354A16 | 000000 | ||
Slotted | ||||||||||||
Premium | ||||||||||||
| 1/4" | Standard | 8 1/2" | 4" | 1/4" | 14, 12, 10 | 0.064" to 0.102" | Chrome-Plated Steel | Klein Tools | 5354A13 | 00000 | ||
| 1/4" | Long | 10 1/2" | 6" | 1/4" | 14, 12, 10 | 0.064" to 0.102" | Chrome-Plated Steel | Klein Tools | 5354A14 | 00000 | ||
Flexible Bit Screwdrivers
 |
A flexible shaft bends around obstacles to access screws in hard-to-reach places. These screwdrivers snake into compact machinery where a rigid tool won't fit. Attach a bit (not included) to drive a variety of screws with a single tool.
Premium—The best screwdrivers available, with handles that keep you comfortable during long stretches of use.
Quick-Change Chuck—Holds bits more securely than a magnet, so they don't accidently slip off. Pull back the chuck to insert a bit; push the chuck forward to lock the bit in place.
Precise-Control Ball-Tip Screwdriver Sets
|  |
Turn a variety of screws at an angle in small, tightly-packed equipment, such as control panels. These screwdrivers have a ball tip that engages the drive with less contact than a straight tip. Also known as precision and miniature screwdrivers, they allow for nimble, fine-tuned adjustments. Press the end of the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips.
No. of Pieces | Includes | Max. Access Angle | Grip Style | Material | Each | |||
|---|---|---|---|---|---|---|---|---|
Hex | ||||||||
| 5 | 1.35 mm Hex Screwdriver—4 3/4" O'all Lg. 1.5 mm Hex Screwdriver—5 3/4" O'all Lg. 2 mm Hex Screwdriver—5 3/4" O'all Lg. 2.5 mm Hex Screwdriver—6 3/4" O'all Lg. 3 mm Hex Screwdriver—6 3/4" O'all Lg. | 20° | Plain | Chrome-Plated Steel | 55035A55 | 000000 | ||
| 8 | 0.050" Hex Screwdriver—4 3/4" O'all Lg. 1/16" Hex Screwdriver—5 3/4" O'all Lg. 5/64" Hex Screwdriver—5 3/4" O'all Lg. 3/32" Hex Screwdriver—5 3/4" O'all Lg. 7/64" Hex Screwdriver—6 3/4" O'all Lg. 1/8" Hex Screwdriver—6 3/4" O'all Lg. 9/64" Hex Screwdriver—6 3/4" O'all Lg. 5/32" Hex Screwdriver—6 3/4" O'all Lg. | 20° | Plain | Chrome-Plated Steel | 7268A66 | 00000 | ||
Nonsparking Screwdriver Sets
 |
Made of beryllium copper that is Factory Mutual (FM) approved, the screwdrivers in these sets won't create sparks when scraped, struck, or dropped. They help you meet OSHA requirements when fastening screws in hazardous environments where flammable liquid, dust, or gas could be lurking. Use them everywhere from oil and gas refineries to paper mills.
These no-frills sets are ideal for industrial maintenance, withstanding years of heavy use in the shop and on the jobsite. The hard plastic handles won't crack or wear out from drops and scrapes. They're also easy to wipe down and won't get sticky or gummy when exposed to oils or chemicals, unlike soft handles.
Warning: Do not use these screwdrivers in direct contact with acetylene.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
No. of Pieces | Includes | Material | Mfr. | Certification | Container Type | Each | |||
|---|---|---|---|---|---|---|---|---|---|
Phillips and Slotted | |||||||||
Premium | |||||||||
| 4 | 5/16" Slotted Screwdriver—6 1/2" O'all Lg. 5/16" Slotted Screwdriver—10 1/4" O'all Lg. 3/8" Slotted Screwdriver—13" O'all Lg. No. 2 Phillips Screwdriver—7 1/2" O'all Lg. | Beryllium Copper | Ampco Safety Tools | FM Approved | Canvas Roll-Up Pouch | 6525A21 | 0000000 | ||
| 6 | 5/16" Slotted Screwdriver—6 1/2" O'all Lg. 5/16" Slotted Screwdriver—10 1/4" O'all Lg. 3/8" Slotted Screwdriver—13" O'all Lg. No. 1 Phillips Screwdriver—6 1/2" O'all Lg. No. 2 Phillips Screwdriver—7 1/2" O'all Lg. No. 3 Phillips Screwdriver—10 1/4" O'all Lg. | Beryllium Copper | Ampco Safety Tools | FM Approved | Canvas Roll-Up Pouch | 6525A22 | 000000 | ||
Screw-Holding Screwdriver Sets
|  |  |
Ball Detent | Wedge Tip |
No. of Pieces | Includes | Max. Access Angle | Screw-Holding Mechanism | Material | Mfr. | Container Type | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|
Hex | ||||||||||
Premium | ||||||||||
| 6 | 1.5 mm Hex Screwdriver—4 11/16" O'all Lg. 2 mm Hex Screwdriver—5" O'all Lg. 2.5 mm Hex Screwdriver—5 1/8" O'all Lg. 3 mm Hex Screwdriver—6 11/16" O'all Lg. 4 mm Hex Screwdriver—8 1/8" O'all Lg. 5 mm Hex Screwdriver—8 5/8" O'all Lg. | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | Plastic Pouch | 9694N15 | 000000 | ||
| 8 | 0.050" Hex Screwdriver—4 1/8" O'all Lg. 1/16" Hex Screwdriver—4 11/16" O'all Lg. 5/64" Hex Screwdriver—4 13/16" O'all Lg. 3/32" Hex Screwdriver—5 3/16" O'all Lg. 7/64" Hex Screwdriver—5 5/16" O'all Lg. 1/8" Hex Screwdriver—6 5/8" O'all Lg. 9/64" Hex Screwdriver—6 13/16" O'all Lg. 5/32" Hex Screwdriver—7 7/8" O'all Lg. | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | Plastic Pouch | 9694N14 | 00000 | ||
| 9 | 1.5 mm Hex Screwdriver—4 3/4" O'all Lg. 2 mm Hex Screwdriver—5" O'all Lg. 2.5 mm Hex Screwdriver—5 1/8" O'all Lg. 3 mm Hex Screwdriver—6 3/4" O'all Lg. 4 mm Hex Screwdriver—8 1/4" O'all Lg. 5 mm Hex Screwdriver—8 3/4" O'all Lg. 6 mm Hex Screwdriver—10 1/4" O'all Lg. 8 mm Hex Screwdriver—11 1/4" O'all Lg. 10 mm Hex Screwdriver—12 1/4" O'all Lg. | 20° | Ball Detent | Phosphate-Coated Steel | Bondhus | Plastic Pouch | 5691A1 | 00000 | ||
| 13 | 0.050" Hex Screwdriver—4 1/8" O'all Lg. 1/16" Hex Screwdriver—4 3/4" O'all Lg. 5/64" Hex Screwdriver—4 7/8" O'all Lg. 3/32" Hex Screwdriver—5 1/4" O'all Lg. 7/64" Hex Screwdriver—5 3/8" O'all Lg. 1/8" Hex Screwdriver—6 5/8" O'all Lg. 9/64" Hex Screwdriver—6 7/8" O'all Lg. 5/32" Hex Screwdriver—8" O'all Lg. 3/16" Hex Screwdriver—8" O'all Lg. 7/32" Hex Screwdriver—9" O'all Lg. 1/4" Hex Screwdriver—10" O'all Lg. 5/16" Hex Screwdriver—10 1/2" O'all Lg. 3/8" Hex Screwdriver—11 1/2" O'all Lg. | 20° | Ball Detent | Phosphate-Coated Steel | Bondhus | Plastic Pouch | 5691A2 | 00000 | ||
Torx | ||||||||||
Premium | ||||||||||
| 4 | T20 Torx Screwdriver—15 5/8" O'all Lg. T25 Torx Screwdriver—16" O'all Lg. T27 Torx Screwdriver—16" O'all Lg. T30 Torx Screwdriver—16" O'all Lg. | — | Wedge Tip | Nickel-Plated Steel | Wera | Plastic Rack | 9694N11 | 00000 | ||
| 6 | T10 Torx Screwdriver—6 5/16" O'all Lg. T15 Torx Screwdriver—7" O'all Lg. T20 Torx Screwdriver—7 13/16" O'all Lg. T25 Torx Screwdriver—8" O'all Lg. T30 Torx Screwdriver—8 5/8" O'all Lg. T40 Torx Screwdriver—9 1/2" O'all Lg. | — | Wedge Tip | Nickel-Plated Steel | Wera | Plastic Rack | 9694N12 | 00000 | ||
| 7 | T8 Torx Screwdriver—5 9/16" O'all Lg. T10 Torx Screwdriver—6 5/16" O'all Lg. T15 Torx Screwdriver—7" O'all Lg. T20 Torx Screwdriver—7 13/16" O'all Lg. T25 Torx Screwdriver—8" O'all Lg. T27 Torx Screwdriver—16" O'all Lg. T30 Torx Screwdriver—8 5/8" O'all Lg. | — | Wedge Tip | Nickel-Plated Steel | Wera | Plastic Rack | 9694N13 | 00000 | ||
Air-Powered Screwdrivers
 |
Connect these tools to your shop air to quickly install and remove fasteners. With fewer moving parts than battery-powered screwdrivers, these are less likely to overheat when used continuously. They also operate at higher speeds than battery-powered screwdrivers, so they're great for production lines and other high-volume jobs when you're on a time crunch.
Pistol Grip—The angled handle keeps your wrist in a comfortable, natural position, reducing fatigue during lengthy projects.
Direct Drive—These screwdrivers will spin as long as you press the trigger. They don't have any built-in mechanism for preventing overtightening or limiting torque, so they're best for jobs where speed matters more than precision. You don't have to push on the screw to turn the bit, so they're often used to fasten compressible materials.
Positive-Clutch Drive—Designed to prevent overtightening, these screwdrivers are best for jobs that require consistent torque, such as electronics. Pull the trigger and push on the screw to start turning the bit. They'll stop automatically when they reach the max torque.
Air Inlet | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Speeds | Max. No-Load Speed, rpm | For Bit Hex Shank Size | Recommended Operating Air Pressure, psi | Average Air Consumption @ Pressure | Pipe Size | Thread Type | Gender | For Air Hose ID | Wt., lb. | Each | |||
Pistol Grip | |||||||||||||
Direct Drive | |||||||||||||
| 1 | 2,200 | 1/4" | 90 | 2.5 ft³/min @ 90 psi | 1/4 | NPT | Female | 3/8" | 2.3 | 5767A78 | 0000000 | ||
| Variable | 1,800 | 1/4" | 90 | 4 ft³/min @ 90 psi | 1/4 | NPT | Female | 3/8" | 2.3 | 57555A21 | 000000 | ||
Positive-Clutch Drive | |||||||||||||
| Variable | 1,800 | 1/4" | 90 | 4 ft³/min @ 90 psi | 1/4 | NPT | Female | 3/8" | 2.9 | 57485A11 | 000000 | ||
Depth-Limiting Cordless Screwdrivers
 |
Adjust the nosepiece on these screwdrivers to stop screws from sinking too deep. They're perfect for wood, fiberboard, drywall, and other soft materials that may crack if you overdrive the fastener. Power screwdrivers tighten and loosen screws quickly to tackle tasks that would be tedious with a manual driver. Charge the batteries to work in remote areas without power.
Pistol Grip—The angled handle keeps your wrist in a comfortable, natural position, reducing fatigue during lengthy projects.
Screwdrivers | Replacement Batteries | Replacement Chargers | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Battery | |||||||||||||||||
No. of Speeds | Max. No-Load Speed, rpm | For Bit Hex Shank Size | Mfr. | Mfr. Model No. | Wt., lb. | Voltage, V DC | Chemistry | Included | Battery Charger Included | Each | Each | Each | |||||
Pistol Grip | |||||||||||||||||
| Variable | 4,800 | 1/4" | DeWalt | DCF630D2 | 2.2 | 20 | Lithium Ion (Li-Ion) | Yes | Yes | 5687A71 | 0000000 | 29835A4 | 0000000 | 29835A113 | 0000000 | ||
Robot-Ready Collaborative Screwdrivers
 |
 |
Turn your robot into an automated screwdriving system that can handle nearly any fastening task without complicated programming. These screwdrivers work with screws of most head types, drive styles, materials, and sizes. They’re able to turn six perfectly torqued screws per minute. Since they’re ESD safe, you can use them with sensitive electronic components.
They come with a controller that makes programming simple. Use your computer’s web browser to connect to the controller, then use the step-by-step interface to select the screw type, depth, torque, and other settings for each job. Store up to 300 programs to quickly switch from job to job.
Real-time monitoring and data recording ensures each screw is installed correctly before moving to the next. This also means you can view your operation live or review it later.
To help you meet ISO/TS 15066 standards for working near robots, these screwdrivers include built-in safety features. A shield covers the screws and bits to protect you from moving parts. If anything hits the screwdriver, a safety sensor halts operations. Plus, sound and light indicate the screwdriver’s status to everyone in the area.
A complete system requires a screwdriver and at least one screw feeder. All screwdrivers have a built-in magnet to pick up steel and other magnetic screws, but you’ll need a vacuum generator kit to pick up nonmagnetic screws. Add a bit changing station for complex tasks that require screws with different drive styles or sizes.
Screwdrivers
 |
These screwdrivers come with everything you need to get started, including a mount for the end of your robot arm, an assortment of bit sleeves for different screw sizes, a controller, and all the cords you need to hook them up to your robot. The controller plugs into a standard outlet for power. Route the cords along your robot arm with the included hook and loop straps.
They are UR+ certified, so they’ve been tested to work seamlessly with your Universal Robots (UR) arm. They come with a URCap plug-in, so you can easily control them with your teach pendant. You’ll need to connect them to the safety I/O terminals and Ethernet port on your robot controller. If using these screwdrivers with a different collaborative robot, such as FANUC CRX, you’ll need to connect them to 8 digital inputs and 8 digital outputs on your robot controller. This allows you to define and control up to 32 actions—more than enough for most screwdriving tasks.
For Screw | For Bit | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Torque Range | Max. Rotation Speed, rpm | Size | Head Type | Max. Lg. | Hex Shank Size | Max. Lg. | Bolt Circle Dia. (Mounting Pattern Compatibility) | Each | ||
| 1.8 in·lbf to 29 in·lbf 0.2 N-m to 3.3 N-m | 730 | No. 2 to No. 10 M2 to M5 | Rounded, Socket, Flat | 1 1/8", 35 mm | 1/4" | 2" | 50 mm (ISO 50) | 9056N11 | 0000000000 | |
| 4.4 in·lbf to 44 in·lbf 0.5 N-m to 5 N-m | 510 | No. 2 to No. 10 M2 to M5 | Rounded, Socket, Flat | 1 1/8", 35 mm | 1/4" | 2" | 50 mm (ISO 50) | 9056N12 | 000000000 | |
| 17.7 in·lbf to 106 in·lbf 2 N-m to 12 N-m | 180 | No. 10 to 5/16" M5 to M8 | Rounded, Socket, Flat | 1 1/8", 35 mm | 1/4" | 2" | 50 mm (ISO 50) | 9056N13 | 000000000 | |
Vacuum Generator Kits
 |
Connect these kits to your compressed air supply to create the suction needed to pick up stainless steel, plastic, and other nonmagnetic screws. They can also pick up magnetic screws. You’ll need to connect the vacuum generator to a digital output on your robot controller to toggle suction on and off. You’ll need another digital input to monitor vacuum levels and confirm that a screw has been picked up.
Intake | Vacuum | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Max. Vacuum @ Temp. | Max. Flow Rate, ft³/min | Operating Pressure, psi | Connection | For Tube OD, mm | Connection | For Tube OD, mm | Includes | Each | ||
| 27.5 in. Hg @ 72° F | 0.74 | 55 | Push to Connect | 6 | Push to Connect | 6 | Vacuum Generator 2 Signal Cords (1.5-ft. Long) 2 Push-to-Connect Fittings 6 mm OD Plastic Tubing (13-ft. Long) Silencer | 9056N14 | 0000000 | |
Screw Feeders
 |
These screw feeders present each screw headfirst, so it’s easy for these screwdrivers to pick them up. They’re ready to use right out of the box—just pour your screws into the hopper. They’re durable enough to hold up to extensive use without jamming. You can integrate them with your robot to send a signal when the next screw is ready.
For Screw | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Size | Head Dia. | Head Ht. | Lg. | Head Type | Screw Pick-Up Rate, per sec. | Voltage, V AC | Each | ||
| No. 000, M1 | 0.071" to 0.177" 1.8 mm to 4.5 mm | 0.014" to 0.039" 0.35 mm to 1 mm | 0.063" to 0.394" 1.6 mm to 10 mm | Rounded, Socket, Hex | 1 | 100 to 240 | 5931A125 | 0000000 | |
| No. 00, M1.2 | 0.071" to 0.177" 1.8 mm to 4.5 mm | 0.014" to 0.039" 0.35 mm to 1 mm | 0.075" to 0.394" 1.9 mm to 10 mm | Rounded, Socket, Hex | 1 | 100 to 240 | 5931A126 | 000000 | |
| No. 00, No. 0, M1.4 | 0.079" to 0.177" 2 mm to 4.5 mm | 0.014" to 0.039" 0.35 mm to 1 mm | 0.087" to 0.394" 2.2 mm to 10 mm | Rounded, Socket, Hex | 1 | 100 to 240 | 5931A127 | 000000 | |
| No. 0, No. 1, M1.7 | 0.079" to 0.177" 2 mm to 4.5 mm | 0.014" to 0.039" 0.35 mm to 1 mm | 0.106" to 0.394" 2.7 mm to 10 mm | Rounded, Socket, Hex | 1 | 100 to 240 | 5931A128 | 000000 | |
| No. 1, M2 | 0.118" to 0.138" 3 mm to 3.5 mm | 0.02" to 0.217" 0.5 mm to 5.5 mm | 0.126" to 0.708" 3.2 mm to 18 mm | Rounded, Socket, Hex | 1 | 100 to 240 | 5931A129 | 00000000 | |
| No. 2, M2.3 | 0.13" to 0.157" 3.3 mm to 4 mm | 0.02" to 0.217" 0.5 mm to 5.5 mm | 0.146" to 0.708" 3.7 mm to 18 mm | Rounded, Socket, Hex | 1 | 100 to 240 | 5931A131 | 00000000 | |
| No. 3, M2.6 | 0.142" to 0.177" 3.6 mm to 4.5 mm | 0.02" to 0.217" 0.5 mm to 5.5 mm | 0.165" to 0.708" 4.2 mm to 18 mm | Rounded, Socket, Hex | 1 | 100 to 240 | 5931A132 | 00000000 | |
| No. 4, M3 | 0.157" to 0.217" 4 mm to 5.5 mm | 0.02" to 0.217" 0.5 mm to 5.5 mm | 0.189" to 0.708" 4.8 mm to 18 mm | Rounded, Socket, Hex | 1 | 100 to 240 | 5931A133 | 00000000 | |
| No. 6, M3.5 | 0.189" to 0.315" 4.8 mm to 8 mm | 0.02" to 0.315" 0.5 mm to 8 mm | 0.22" to 0.708" 5.6 mm to 18 mm | Rounded, Socket, Hex | 1 | 100 to 240 | 5931A134 | 00000000 | |
| No. 7, No. 8, M4 | 0.213" to 0.315" 5.4 mm to 8 mm | 0.02" to 0.315" 0.5 mm to 8 mm | 0.252" to 0.708" 6.4 mm to 18 mm | Rounded, Socket, Hex | 1 | 100 to 240 | 5931A135 | 00000000 | |
| No. 10, M5 | 0.244" to 0.394" 6.2 mm to 10 mm | 0.02" to 0.315" 0.5 mm to 8 mm | 0.315" to 0.708" 8 mm to 18 mm | Rounded, Socket, Hex | 1 | 100 to 240 | 5931A136 | 00000000 | |
Bit Changing Stations
 |
Equip your robot arm to swap bits on its own. These stations hold up to three bits—add more stations if you need more bits. They come with a variety of bit sleeves to fit different screw sizes. Simply mount them to a flat surface with the included fasteners.
For Bit | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For No. of Bits | Hex Shank Size | Max. Lg. | Wd. | Dp. | Mounting Fasteners Included | Includes | Each | ||
| 3 | 1/4" | 2" | 6 5/8" | 2 3/8" | Yes | 6 Bit Sleeve Holders (2 each: for .094" & .125" Shaft Diameters, for .156" & .172" Shaft Diameters, for .203" and .234" Shaft Diameters) 6 Bit Sleeves for Magnetic Screws 6 Bit Sleeves for Nonmagnetic Screws | 9056N15 | 0000000 | |
Antislip-Grip Bit Screwdrivers
 |
Switch out bits to drive a variety of screws with a firm grip, even with greasy or oily hands. These screwdrivers have a microfiber-like textured handle that improves your grip. They are ideal for machinists, maintenance technicians, and anyone working in dirty environments. Bits for different screw sizes and drives are not included.
Premium—The best screwdrivers available, with handles that keep you comfortable during long stretches of use.
Shaft | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
For Bit Hex Shank Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Material | Bit-Holding Mechanism | Mfr. | Each | |||
Premium | |||||||||||
| 1/4" | Standard | 9 5/8" | 4 7/8" | 1/4" | Chrome-Plated Steel | Magnet | Wiha | 9980N11 | 000000 | ||
Ball-Handle Screwdriver Sets
 |
No. of Pieces | Includes | Material | Mfr. | Each | |||
|---|---|---|---|---|---|---|---|
Phillips and Slotted | |||||||
Premium | |||||||
| 4 | 3/16" Slotted Screwdriver—6 1/8" O'all Lg. 1/4" Slotted Screwdriver—7 7/8" O'all Lg. No. 1 Phillips Screwdriver—6 1/8" O'all Lg. No. 2 Phillips Screwdriver—7 7/8" O'all Lg. | Chrome-Plated Steel | Vessel | 9573N111 | 000000 | ||
Bit Screwdrivers for Stainless Steel Screws
 |
Swap out a pile of drivers for one handle and bits that keep your stainless steel screws looking brand new. Unlike conventional steel bits, the stainless steel bits that come with these screwdrivers won't leave steel particles in screw heads that can rust and cause orange streaks when wet. Their superior corrosion resistance allows them to withstand marine environments and exposure to chemicals.
Premium—The best screwdrivers available, with handles that keep you comfortable during long stretches of use. They come with high-quality bits that fit snugly into fastener recesses to turn screws quickly without slipping.
Bit | Shaft | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Sizes | Sizes Included | Material | Holding Mechanism | For Bit Hex Shank Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Material | Mfr. | Each | |||
Bit Screwdrivers with Bit Storage in Pouch | ||||||||||||||
Premium | ||||||||||||||
| 16 | Phillips: No. 1, No. 2, No. 3 Slotted: 7/32" Hex: 3/32", 1/8", 5/32", 3/16" Tamper-Resistant Torx: T10, T15, T20, T25, T30 Square: No. 1, No. 2, No. 3 | Stainless Steel | Quick-Change Chuck | 1/4" | Standard | 7 5/8" | 13/16" | 7/16" | Stainless Steel | Wera | 9742N11 | 000000 | ||
Crank-Handle Bit Screwdrivers
 |
Crank through fastening jobs without straining your wrist. These screwdrivers have a free-spinning handle and offset shaft to make repetitive screw turning less tiring. They are a good choice for quickly driving long threaded screws. You can turn both Phillips and slotted screws with one tool using the reversible bit. The cushioned rubber grip on these screwdrivers gives you comfort and control as you fasten.
Premium—The best screwdrivers available, with handles that keep you comfortable during long stretches of use. They come with high-quality bits that fit snugly into fastener recesses to turn screws quickly without slipping.
Shaft | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Sizes | Sizes Included | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Material | Bit-Holding Mechanism | Mfr. | Each | |||
Premium | ||||||||||||
| 2 | Phillips: No. 2 Slotted: 3/16" | Standard | 9 3/4" | 6" | 3/8" | Steel | Ball Detent | Klein Tools | 9846N11 | 000000 | ||
Quick-Drive Bit Screwdrivers
 |
Power drill speed with all the control of a hand screwdriver. Thanks to their two-piece handle and internal gears, every full twist of the handle spins the bit four times. When you need more torque and control, press the button at the end of the handle to disengage the quick-drive gears and turn screws normally. These screwdrivers come with interchangeable bits for multiple screw sizes and types, all stored in a pouch.
Premium—The best screwdrivers available, with handles that keep you comfortable during long stretches of use. They come with high-quality bits that fit snugly into fastener recesses to turn screws quickly without slipping.
Shaft | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Sizes | Sizes Included | For Bit Hex Shank Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Material | Bit-Holding Mechanism | Mfr. | Each | |||
Bit Screwdrivers with Bit Storage in Pouch | |||||||||||||
Premium | |||||||||||||
| 18 | Phillips: No. 1, No. 2, No. 3 Slotted: 5/32", 7/32", 1/4" Hex: 3/32", 1/8", 5/32", 3/16" Torx: T10, T15, T20, T25, T30 Square: No. 1, No. 2, No. 3 | 1/4" | Standard | 9 1/4" | 1 1/16" | 3/8" | Nickel-Plated Steel | Quick-Change Chuck | Wera | 9867N11 | 0000000 | ||
Static-Control Precise-Control Bit Screwdrivers
 |
Prevent harmful shocks as you adjust a variety of screws on circuit boards and other sensitive electronics. These screwdrivers drain static away from your workpiece before it causes damage. They’re also known as ESD-safe screwdrivers. They give you more control than standard screwdrivers to avoid stripping tiny screws or cracking delicate materials. Press your palm against the end of the handle as you rotate the shaft with your fingertips.
Warning: These screwdrivers conduct electricity. Do not use them near active power sources.
Premium—The best screwdrivers available, with handles that keep you comfortable during long stretches of use. They come with high-quality bits that fit snugly into fastener recesses to turn screws quickly without slipping.
Shaft | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Sizes | Sizes Included | Components Included | For Bit Hex Shank Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Material | Bit-Holding Mechanism | Static Control Rating | Surface Resistivity | Mfr. | Each | |||
Bit Screwdrivers with Bit Storage in Case | ||||||||||||||||
Premium | ||||||||||||||||
| 32 | Phillips: No. 000, No. 00 (2), No. 0, No. 1 Slotted: 0.031", 0.059", 0.079", 0.098", 0.118", 0.138" Hex: 1/16", 5/32", 5/64", 1/8" Hex: 0.9 mm, 1.3 mm, 1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm Torx: T2, T3, T4, T6, T8 Pentalobe: PL1, PL2, PL3, PL4, PL5, PL6 Y-Type: No. 000 | Bit Screwdriver for 4 mm Bits 3.9" Lg. Extension iPhone Standoff Bit | 4 mm | Standard | 8 1/4" | 4" | 9/32" | Chrome-Plated Steel | Magnet | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | Wiha | 9906N11 | 000000 | ||
T-Handle Bit Screwdrivers
 |
Apply more torque with less effort than a standard screwdriver. These screwdrivers have a wide T-shaped handle that keeps your wrist in a comfortable, neutral position and lets you lean into the driver. Use the bit holder at the end of the shaft for a long reach. Or use them like an L-key for extra leverage—there's a bit holder in the handle too. Swap out the bit (not included) to drive multiple screw sizes and styles.
Premium—The best screwdrivers available, with handles that keep you comfortable during long stretches of use.
Shaft | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
For Bit Hex Shank Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Material | Bit-Holding Mechanism | Mfr. | Each | |||
Premium | |||||||||||
| 1/4" | Standard | 7 3/16" | 5 7/8" | 3/8" | Chrome-Plated Steel | Magnet | Wiha | 9861N11 | 000000 | ||
Cushion-Grip Electrical Insulating Screwdriver Sets
 |
With an iconic cushioned grip over a hard plastic core, these screwdrivers prevent dangerous zaps around live circuits. The rubberized, insulated handle absorbs up to 1,000 volts to meet ASTM and IEC standards. Use these drivers to repair or install electrical panels, outlets, switches, and light fixtures.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
No. of Pieces | Includes | Insulated Shaft Type | Material | Mfr. | Specs. Met | Each | |||
|---|---|---|---|---|---|---|---|---|---|
Phillips, Slotted, and Square | |||||||||
Premium | |||||||||
| 3 | 1/4" Slotted Screwdriver—8 5/16" O'all Lg. No. 2 Phillips Screwdriver—8 5/16" O'all Lg. No. 2 Square Screwdriver—8 5/16" O'all Lg. | Standard | Plastic-Coated Steel | Klein Tools | IEC 60900, ASTM F1505 | 9570N11 | 000000 | ||
| 6 | 3/16" Slotted Screwdriver—10 5/16" O'all Lg. 1/4" Slotted Screwdriver—8 5/16" O'all Lg. No. 1 Phillips Screwdriver—10 5/16" O'all Lg. No. 2 Phillips Screwdriver—8 5/16" O'all Lg. No. 2 Phillips Screwdriver—10 5/16" O'all Lg. No. 2 Square Screwdriver—10 5/16" O'all Lg. | Standard | Plastic-Coated Steel | Klein Tools | IEC 60900, ASTM F1505 | 9570N12 | 00000 | ||
Precise-Control Bit Screwdrivers
 |
Make fine adjustments to a wide range of screws in electronics, miniature models, and more. These screwdrivers give you more control than standard screwdrivers, so you can avoid stripping tiny screws or cracking delicate materials. They’re also known as miniature screwdrivers. Press your palm against the end of the handle as you rotate the shaft with your fingertips.
All components come in a carrying case with a magnetic locking lid. The underside of the lid has a raised grid pattern, so you can use it to organize your screws while you work.
Premium—The best screwdrivers available, with handles that keep you comfortable during long stretches of use. They come with high-quality bits that fit snugly into fastener recesses to turn screws quickly without slipping.
Shaft | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Sizes | Sizes Included | Components Included | For Bit Hex Shank Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Material | Bit-Holding Mechanism | Mfr. | Each | |||
Bit Screwdrivers with Bit Storage in Case | ||||||||||||||
Premium | ||||||||||||||
| 59 | Phillips: No. 000, No. 00, No. 0, No. 1, No. 2 Slotted: 0.039", 0.059", 0.079", 0.098", 0.118", 0.157" Hex: 0.7 mm, 0.9 mm, 1.3 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm Torx: T2, T3, T4, T5 Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15, T20, T25 Pentalobe: PL2, PL5, PL6 JIS: No. 000, No. 00, No. 0, No. 1 Y-Type: No. 000, No. 00, No. 0, No. 1 Square: No. 1, No. 2 Gamebit: 3.8 mm, 4.5 mm Drilled Spanner: No. 6, No. 8 Triangle: 2 mm, 3 mm Nutdriver: 2.5 mm, 3 mm, 3.5 mm, 4 mm, 5 mm, 5.5 mm | Bit Screwdriver for 4 mm Bits 1/4" × 4 mm Hex Shank Adapter 6" Lg. Flexible Extension iPhone Standoff Bit Oval Drive Bit SIM Card Ejector Bit Magnetic Retriever Bit | 4 mm | Standard | 4 1/2" | 13/16" | 1/4" | Aluminum | Magnet | iFixIt | 9749N11 | 000000 | ||
| 102 | Phillips: No. 000, No. 00, No. 0 Phillips: No. 1, No. 2, No. 3 Slotted: 0.039", 0.059", 0.079", 0.098", 0.118", 0.138" Slotted: 0.157", 0.197", 0.236", 0.276", 0.315" Hex: 0.7 mm, 0.9 mm, 1.3 mm, 1.5 mm Torx: T2, T3, T4, T5 Torq-Set®: No. 6, No. 8, No. 10 Tamper-Resistant Hex: 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" Tamper-Resistant Hex: 2 mm, 2.5 mm, 3 mm, 3.5 mm Tamper-Resistant Hex: 4 mm, 5 mm, 6 mm, 7 mm, 8mm Tamper-Resistant Torx: T6, T7, T8 Tamper-Resistant Torx: T9, T10, T15, T20, T25, T27, T30, T35, T40 Pentalobe: PL2, PL5, PL6 JIS: No. 000, No. 00, No. 0, No. 1 Y-Type: No. 000, No. 00, No. 0, No. 1 Square: No. 0, No. 1, No. 2, No. 3 Pozidriv®: No. 0, No. 1, No. 2, No. 3 Gamebit: 3.8 mm, 4.5 mm Drilled Spanner: No. 4, No. 6 Drilled Spanner: No. 8, No. 10, No. 12 Triple Square: M5, M6, M8 Tri-Wing®: No. 1, No. 2, No. 3, No. 4 Triangle: 2 mm, 2.2 mm, 2.6 mm, 3 mm Clutch: No. 1, No. 2, No. 3 Nutdriver: 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm | Bit Screwdriver for 4 mm Bits Bit Screwdriver for 1/4" Bits 1/4" × 4 mm Hex Shank Adapter 1/4" Hex Shank × 1/4" Square Drive Adapter 1/4" Driver × 3/8" Square Drive Adapter 1/4" Square Drive × 1/4" Hex Shank Adapter iPhone Standoff Bit Oval Drive Bit SIM Card Ejector Bit Magnetic Retriever Bit Schrader Valve Core Bit Eyebolt and Hook Drive Bit | 1/4", 4 mm | Standard | 4 1/2" | 13/16" | 1/4" | Aluminum | Magnet | iFixIt | 9749N12 | 00000 | ||
Static-Control Bit Screwdrivers
 |
Swap out bits to fasten a variety of screws on circuit boards and other sensitive electronics while preventing harmful static shocks. Also known as ESD-safe screwdrivers, they drain static away from your workpiece before it causes damage.
Warning: These screwdrivers conduct electricity. Do not use them near active power sources.
Premium—The best screwdrivers available, with handles that keep you comfortable during long stretches of use. They come with high-quality bits that fit snugly into fastener recesses to turn screws quickly without slipping.
Stubby—An extra-short handle and shaft squeeze behind mounted equipment and inside small panels.
Shaft | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Sizes | Sizes Included | For Bit Hex Shank Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Material | Bit-Holding Mechanism | Static Control Rating | Surface Resistivity | Mfr. | Each | |||
Bit Screwdrivers with Bit Storage in Pouch | |||||||||||||||
Premium | |||||||||||||||
| 9 | Phillips: No. 00, No. 0, No. 1, No. 2 Slotted: 1/8", 3/16", 7/32", 1/2", 5/16" | 1/4" | Stubby | 3 1/8" | 3/8" | 7/16" | Nickel-Plated Steel | Magnet | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | Wera | 9875N11 | 000000 | ||
| 16 | Phillips: No. 1, No. 2, No. 3 Slotted: 7/32" Hex: 3 mm, 4 mm, 5 mm, 6 mm Tamper-Resistant Torx: T10, T15, T20, T25, T30 Pozidriv®: No. 1, No. 2, No. 3 | 1/4" | Standard | 7 3/4" | 13/16" | 3/8" | Nickel-Plated Steel | Quick-Change Chuck | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | Wera | 9875N12 | 00000 | ||
Bit Screwdrivers without Bits
 |
Instead of lugging several drivers, swap your bits in and out of these screwdrivers to turn a variety of screws.
Premium—The best screwdrivers available, with handles that keep you comfortable during long stretches of use.
Stubby—An extra-short handle and shaft squeeze behind mounted equipment and inside small panels.
Shaft | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
For Bit Hex Shank Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Material | Bit-Holding Mechanism | Mfr. | Each | |||
Premium | |||||||||||
| 1/4" | Stubby | 2 1/2" | 3/8" | 7/16" | Nickel-Plated Steel | Magnet | Wera | 9844N11 | 000000 | ||
| 1/4" | Standard | 9 1/8" | 4 3/4" | 7/16" | Nickel-Plated Steel | Retaining Ring | Wera | 9844N12 | 00000 | ||
| 1/4" | Long | 15 11/16" | 11 13/16" | 3/8" | Chrome-Plated Steel | Magnet | Wiha | 9844N13 | 00000 | ||
Ball-Handle Screwdrivers
 |
Shaft | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Drive Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Material | Mfr. | Each | |||
Phillips | ||||||||||
Premium | ||||||||||
| No. 1 | Standard | 6 1/8" | 3" | 7/32" | Chrome-Plated Steel | Vessel | 9576N11 | 00000 | ||
| No. 2 | Standard | 7 7/8" | 4" | 1/4" | Chrome-Plated Steel | Vessel | 9576N12 | 0000 | ||
| No. 3 | Standard | 9 13/16" | 6" | 1/4" | Chrome-Plated Steel | Vessel | 9576N13 | 00000 | ||
Slotted | ||||||||||
Premium | ||||||||||
| 7/32" | Standard | 6 1/8" | 3" | 7/32" | Chrome-Plated Steel | Vessel | 9576N14 | 0000 | ||
| 1/4" | Standard | 7 7/8" | 4" | 1/4" | Chrome-Plated Steel | Vessel | 9576N15 | 0000 | ||
| 5/16" | Standard | 9 13/16" | 6" | 5/16" | Chrome-Plated Steel | Vessel | 9576N16 | 00000 | ||
Electrical Insulating Screwdrivers for Stainless Steel Screws
 |
|
Grooved Tip |
|
Standard Insulated Shaft |
Prevent a dangerous zap if you accidentally touch a live circuit while turning stainless steel screws. These screwdrivers have an insulated handle and shaft that absorb up to 1,000 volts of electric shock to meet ASTM, EN, or IEC standards. Unlike steel drivers, these stainless steel tools won’t shed steel particles that can cause screw heads to rust or develop orange streaks. They also resist corrosion, so they’re often used on equipment near chemicals or saltwater.
The handle is made from a combination of soft, grippy plastic for high torque and smooth, hard plastic for quick grip adjustments and high-speed turning. It's also contoured to maximize comfort and minimize hand strain, fatigue, and blisters, even with extended use.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
Standard Length—The most common screwdriver length for a specific drive size.
Grooved Tip—Bites into the screw slot for a firm hold, so you can make fast, easy turns without slippage.
Shaft | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Drive Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Insulated Shaft Type | Tip Texture | Material | Mfr. | Specs. Met | Each | |||
Phillips | |||||||||||||
Premium | |||||||||||||
| No. 1 | Standard | 7" | 3 1/8" | 1/4" | Standard | Grooved | Stainless Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 9602N11 | 000000 | ||
| No. 2 | Standard | 8 1/16" | 4" | 5/16" | Standard | Grooved | Stainless Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 9602N12 | 00000 | ||
Slotted | |||||||||||||
Premium | |||||||||||||
| 1/8" | Standard | 6 5/16" | 3 1/8" | 1/8" | Standard | Grooved | Stainless Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 9602N13 | 0000 | ||
| 9/64" | Standard | 7 1/8" | 4" | 1/8" | Standard | Grooved | Stainless Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 9602N14 | 0000 | ||
| 5/32" | Standard | 7 13/16" | 4" | 5/32" | Standard | Grooved | Stainless Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 9602N15 | 00000 | ||
| 7/32" | Standard | 8 3/4" | 5" | 7/32" | Standard | Grooved | Stainless Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 9602N16 | 00000 | ||
Adjustable-Length Hex Screwdrivers
 |
Slide the shaft in or out of the handle to adjust the reach. Also known as handy-hex screwdrivers, these screwdrivers are often used to install Hi-Lok fasteners. The contoured handle makes them easier to grip than L-keys. Use the thumbscrew to secure the shaft at your desired length.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
Standard Length—The most common screwdriver length for a specific drive size.
Screwdrivers | Replacement Shafts | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shaft | ||||||||||||
Drive Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Material | Mfr. | Each | Each | ||||
Hex | ||||||||||||
Premium | ||||||||||||
| 0.028" | Standard | 3 11/16" to 5 5/8" | 3/16" to 2 1/8" | 1/32" | Phosphate-Coated Steel | Bondhus | 9574N11 | 000000 | 9574N21 | 00000 | ||
| 0.035" | Standard | 3 11/16" to 5 5/8" | 3/16" to 2 1/8" | 1/32" | Phosphate-Coated Steel | Bondhus | 9574N12 | 00000 | 9574N22 | 0000 | ||
| 0.050" | Standard | 3 11/16" to 5 5/8" | 3/16" to 2 1/8" | 3/64" | Phosphate-Coated Steel | Bondhus | 9574N13 | 00000 | 9574N23 | 0000 | ||
| 1/16" | Standard | 3 11/16" to 5 13/16" | 3/16" to 2 5/16" | 1/16" | Phosphate-Coated Steel | Bondhus | 9574N14 | 00000 | 9574N24 | 0000 | ||
| 5/64" | Standard | 3 11/16" to 6" | 3/16" to 2 1/2" | 5/64" | Phosphate-Coated Steel | Bondhus | 9574N15 | 00000 | 9574N25 | 0000 | ||
| 3/32" | Standard | 3 11/16" to 7" | 3/16" to 3 1/2" | 3/32" | Phosphate-Coated Steel | Bondhus | 9574N16 | 00000 | 9574N26 | 0000 | ||
| 7/64" | Standard | 3 11/16" to 7 5/16" | 3/16" to 3 13/16" | 7/64" | Phosphate-Coated Steel | Bondhus | 9574N17 | 00000 | 9574N27 | 0000 | ||
| 1/8" | Standard | 3 11/16" to 7 1/2" | 3/16" to 4" | 1/8" | Phosphate-Coated Steel | Bondhus | 9574N18 | 00000 | 9574N28 | 0000 | ||
| 9/64" | Standard | 3 11/16" to 7 13/16" | 3/16" to 4 5/16" | 9/64" | Phosphate-Coated Steel | Bondhus | 9574N19 | 00000 | 9574N29 | 0000 | ||
