5819K139 | Encased Ceramic Magnet

Filter by

Shape

System of Measurement

Thickness

Direction of Magnetization

Maximum Pull

Mount Type

Magnetic Pull Rating

Magnet Grade

Length

Thread Size

Width

Material

Finish

Hole Diameter

Screw Size

Mounting Hole Style

Maximum Temperature

Color

Flux Density

Sets of Poles

RoHS

Compliant

Compliant with Exemptions

REACH

Compliant

Not Compliant

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

Compliant

Exempt

Not Compliant

Export Control Classification Number (ECCN)

1,429 Products

About Magnets

Choose a magnet with the right strength, material, and temperature resistance for your application.

Neodymium Disc Magnets

Unmatched strength in a compact shape. These magnets have the highest strength-to-size ratio of any magnet, delivering powerful pull force even in tight spaces. Their flat, round shape creates a strong, even pull across surfaces for reliable holding power. However, they may lose magnetic strength at high temperatures. Also known as rare earth magnets.

Warning: Maximum pull ratings are based on direct contact with rust-free, unpainted iron surfaces. Variations in material condition will significantly reduce these ratings. Do not use for lifting over people.

Standard Magnets


Magnetized Through Thickness	Magnetized Through Diameter

N35SH and N38SH—These magnets are less likely than other grades to lose magnetic strength when exposed to temperatures up to 300°F.

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

Magnetized Through Diameter—Magnetized outward from the center, these magnets generate a circular magnetic field. This makes them best for sensors and motors where rotational symmetry and precise angles are key.

Nickel Plated—With a nickel-plated finish, these magnets stand up to solvents, salt water, and chemicals better than uncoated neodymium. The plating may wear off over time, so these are not recommended for applications with a lot of friction or wear.

Uncoated—Apply whatever finish best guards against rust and wear in your environment. If left uncoated, expect corrosion and less durability.

								Each
	OD	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Direction of Magnetization	Finish		1-49	50-Up
0.04" Thick



		0.1"	0.2	130	N52	Through Thickness	Nickel Plated	5862K425	00000	00000


		0.1"	0.3	300	N38SH	Through Thickness	Nickel Plated	5862K74	0000	0000
		1/8"	0.3	175	N52	Through Thickness	Nickel Plated	5862K401	0000	0000
		1/8"	0.4	300	N38SH	Through Thickness	Nickel Plated	5862K77	0000	0000
		5/32"	0.4	175	N52	Through Thickness	Nickel Plated	5862K402	0000	0000
		5/32"	0.7	300	N35SH	Through Thickness	Nickel Plated	5862K23	0000	0000


		1/16" Thick



				1/16"	0.1	175	N52	Through Thickness	Nickel Plated	5862K137	0000	0000


				1/16"	0.9	175	N52	Through Diameter	Nickel Plated	5862K409	0000	0000
				5/64"	0.2	175	N52	Through Thickness	Nickel Plated	5862K403	0000	0000
				5/64"	0.4	300	N38SH	Through Thickness	Nickel Plated	5862K72	0000	0000
				0.1"	0.4	130	N52	Through Thickness	Nickel Plated	5862K426	0000	0000
				0.1"	0.5	300	N38SH	Through Thickness	Nickel Plated	5862K75	0000	0000
				0.118"	0.5	300	N35SH	Through Thickness	Nickel Plated	5862K21	0000	0000
				1/8"	0.33	175	N52	Through Diameter	Nickel Plated	5862K411	0000	0000
				1/8"	0.5	175	N52	Through Thickness	Nickel Plated	5862K138	0000	0000
				1/8"	0.6	300	N35SH	Through Thickness	Nickel Plated	5862K13	0000	0000
				3/16"	0.38	175	N52	Through Diameter	Nickel Plated	5862K412	0000	0000


				3/16"	0.9	170	N35	Through Thickness	Uncoated	5862K962	0000	0000
				3/16"	0.9	175	N52	Through Thickness	Nickel Plated	5862K139	0000	0000
				1/4"	0.54	175	N52	Through Diameter	Nickel Plated	5862K413	0000	0000
				1/4"	1.3	300	N38SH	Through Thickness	Nickel Plated	5862K79	0000	0000
				1/4"	1.4	175	N52	Through Thickness	Nickel Plated	5862K141	0000	0000
				5/16"	2	175	N52	Through Thickness	Nickel Plated	5862K142	0000	0000
				5/16"	2.1	130	N52	Through Diameter	Nickel Plated	5862K429	0000	0000
				3/8"	0.63	175	N52	Through Diameter	Nickel Plated	5862K414	0000	0000
				3/8"	1.5	300	N35SH	Through Thickness	Uncoated	5862K46	0000	0000
				3/8"	2.6	175	N52	Through Thickness	Nickel Plated	5862K143	0000	0000


				7/16"	3.1	175	N52	Through Thickness	Nickel Plated	5862K144	0000	0000
				1/2"	1.2	300	N35SH	Through Thickness	Uncoated	5862K48	0000	0000
				1/2"	3.8	175	N52	Through Thickness	Nickel Plated	5862K145	0000	0000
				1/2"	3.9	130	N52	Through Diameter	Nickel Plated	5862K431	0000	0000
				9/16"	4.3	175	N52	Through Thickness	Nickel Plated	5862K146	0000	0000
				5/8"	4.9	175	N52	Through Thickness	Nickel Plated	5862K147	0000	0000
				11/16"	6	175	N52	Through Thickness	Nickel Plated	5862K148	0000	0000
				3/4"	3	300	N38SH	Through Thickness	Nickel Plated	5862K892	0000	0000
				3/4"	6	175	N52	Through Thickness	Nickel Plated	5862K149	0000	0000
				13/16"	6	175	N52	Through Thickness	Nickel Plated	5862K151	0000	0000


				7/8"	7	175	N52	Through Thickness	Nickel Plated	5862K152	0000	0000
				15/16"	8	175	N52	Through Thickness	Nickel Plated	5862K153	0000	0000
				1"	8	175	N52	Through Thickness	Nickel Plated	5862K154	0000	0000


				0.08" Thick



5/16"	2.5					175	N52	Through Thickness	Nickel Plated	5862K404	0000	0000


0.32"	2.2					300	N38SH	Through Thickness	Nickel Plated	5862K83	0000	0000


0.1" Thick



						1/8"	0.7	175	N52	Through Thickness	Nickel Plated	5862K405	0000	0000


						1/8"	0.7	300	N35SH	Through Thickness	Nickel Plated	5862K25	0000	0000
		1/8"				0.7	300	N35SH	Through Thickness	Uncoated	5862K24	0000	0000
		1/4"	1.8			300	N35SH	Through Thickness	Nickel Plated	58605K31	0000	0000
		1/4"	1.8			300	N35SH	Through Thickness	Uncoated	5862K52	0000	0000
		1/4"	2.1			175	N52	Through Thickness	Nickel Plated	5862K406	0000	0000
		3/8"	2.8			300	N35SH	Through Thickness	Nickel Plated	5862K27	0000	0000
		3/8"	2.8			300	N35SH	Through Thickness	Uncoated	5862K26	0000	0000
		3/8"	3.8			175	N52	Through Thickness	Nickel Plated	5862K407	0000	0000
		3/4"	5			300	N35SH	Through Thickness	Nickel Plated	5862K31	00000	0000
		3/4"	5			300	N35SH	Through Thickness	Uncoated	5862K3	00000	00000


		3/4"	9			175	N52	Through Thickness	Nickel Plated	5862K408	0000	0000


		1/8" Thick



						1/16"	0.1	175	N45	Through Diameter	Nickel Plated	5862K201	0000	0000


						1/16"	0.1	175	N52	Through Thickness	Nickel Plated	5862K155	0000	0000
						1/16"	0.6	300	N35SH	Through Thickness	Nickel Plated	5862K11	0000	0000
						1/8"	0.7	175	N45	Through Diameter	Nickel Plated	5862K202	0000	0000
						1/8"	0.7	300	N35SH	Through Thickness	Nickel Plated	5862K61	0000	0000
						1/8"	0.7	300	N35SH	Through Thickness	Uncoated	5862K51	0000	0000
						1/8"	0.8	175	N52	Through Thickness	Nickel Plated	5862K101	0000	0000
						3/16"	0.87	175	N52	Through Diameter	Nickel Plated	5862K415	0000	0000
						3/16"	1.6	175	N52	Through Thickness	Nickel Plated	5862K102	0000	0000
						1/4"	2.1	300	N35SH	Through Thickness	Nickel Plated	58605K33	0000	0000
						1/4"	2.5	175	N45	Through Diameter	Nickel Plated	5862K203	0000	0000


						1/4"	2.8	175	N52	Through Thickness	Nickel Plated	5862K103	0000	0000
						5/16"	1.57	175	N52	Through Diameter	Nickel Plated	5862K416	0000	0000
						5/16"	4.1	175	N52	Through Thickness	Nickel Plated	5862K156	0000	0000
						3/8"	3	300	N35SH	Through Thickness	Nickel Plated	5862K96	0000	0000
						3/8"	3	300	N35SH	Through Thickness	Uncoated	5862K95	0000	0000
						3/8"	4.7	175	N45	Through Diameter	Nickel Plated	5862K204	0000	0000
						3/8"	5	175	N52	Through Thickness	Nickel Plated	5862K104	0000	0000
						7/16"	7	175	N52	Through Thickness	Nickel Plated	5862K157	0000	0000
						1/2"	4	170	N35	Through Thickness	Uncoated	5862K971	0000	0000
						1/2"	7	175	N45	Through Diameter	Nickel Plated	5862K205	0000	0000


						1/2"	8	175	N52	Through Thickness	Nickel Plated	5862K105	0000	0000
						9/16"	9	175	N52	Through Thickness	Nickel Plated	5862K158	0000	0000
						5/8"	9	175	N45	Through Diameter	Nickel Plated	5862K206	0000	0000
						5/8"	10	175	N52	Through Thickness	Nickel Plated	5862K159	0000	0000
				5/8"		10	300	N38SH	Through Thickness	Nickel Plated	5862K86	0000	0000
				11/16"	11	175	N52	Through Thickness	Nickel Plated	5862K161	0000	0000
				3/4"	8	300	N38SH	Through Thickness	Nickel Plated	5862K893	00000	0000
				3/4"	11	175	N45	Through Diameter	Nickel Plated	5862K207	0000	0000
				3/4"	12	175	N52	Through Thickness	Nickel Plated	5862K106	0000	0000
				13/16"	13	175	N52	Through Thickness	Nickel Plated	5862K162	0000	0000


7/8"				9	300	N38SH	Through Thickness	Nickel Plated	5862K896	00000	00000
7/8"	12			175	N45	Through Diameter	Nickel Plated	5862K208	00000	0000
7/8"	14			175	N52	Through Thickness	Nickel Plated	5862K163	0000	0000
15/16"	15			175	N52	Through Thickness	Nickel Plated	5862K164	0000	0000
1"	10			300	N35SH	Through Thickness	Nickel Plated	58605K83	00000	00000
1"	10			300	N35SH	Through Thickness	Uncoated	58605K43	00000	00000
1"	14			175	N45	Through Diameter	Nickel Plated	5862K209	00000	0000
1"	16			175	N52	Through Thickness	Nickel Plated	5862K107	0000	0000
1 1/8"	18			175	N52	Through Thickness	Nickel Plated	5862K258	00000	0000
1 1/4"	20			175	N52	Through Thickness	Nickel Plated	5862K259	00000	00000


1 3/8"	23			175	N52	Through Thickness	Nickel Plated	5862K261	00000	00000
1 1/2"	25			175	N52	Through Thickness	Nickel Plated	5862K262	00000	00000
1 3/4"	30			175	N52	Through Thickness	Nickel Plated	5862K264	00000	00000
1 7/8"	33			175	N52	Through Thickness	Nickel Plated	5862K265	00000	00000
2"	19			300	N35SH	Through Thickness	Nickel Plated	5862K41	00000	00000
2"	19			300	N35SH	Through Thickness	Uncoated	5862K4	00000	00000
2"	35			175	N52	Through Thickness	Nickel Plated	5862K266	00000	00000
2 1/4"	40			175	N52	Through Thickness	Nickel Plated	5862K267	00000	00000
2 1/2"	44			175	N52	Through Thickness	Nickel Plated	5862K268	00000	00000
2 3/4"	48			175	N52	Through Thickness	Nickel Plated	5862K269	00000	00000

3"	50	175	N52	Through Thickness	Nickel Plated	5862K271	000000	00000

3/16" Thick



		1/16"	0.1	175	N52	Through Thickness	Nickel Plated	5862K165	0000	0000


		1/8"	0.67	175	N52	Through Diameter	Nickel Plated	5862K417	0000	0000
		1/8"	0.9	175	N52	Through Thickness	Nickel Plated	5862K166	0000	0000
		3/16"	1.35	175	N52	Through Diameter	Nickel Plated	5862K418	0000	0000
		3/16"	2.2	175	N52	Through Thickness	Nickel Plated	5862K108	0000	0000
		1/4"	1.94	175	N52	Through Diameter	Nickel Plated	5862K419	0000	0000
		1/4"	3.7	175	N52	Through Thickness	Nickel Plated	5862K109	0000	0000
		5/16"	5	175	N52	Through Thickness	Nickel Plated	5862K167	0000	0000
		3/8"	2.8	175	N52	Through Diameter	Nickel Plated	5862K421	0000	0000
		3/8"	7	175	N52	Through Thickness	Nickel Plated	5862K111	0000	0000
		7/16"	9	175	N52	Through Thickness	Nickel Plated	5862K168	0000	0000


		1/2"	3.37	175	N52	Through Diameter	Nickel Plated	5862K422	0000	0000
		1/2"	5	300	N35SH	Through Thickness	Nickel Plated	5862K63	00000	0000
		1/2"	5	300	N35SH	Through Thickness	Uncoated	5862K53	00000	0000
		1/2"	11	175	N52	Through Thickness	Nickel Plated	5862K112	0000	0000
		9/16"	13	175	N52	Through Thickness	Nickel Plated	5862K169	0000	0000
		5/8"	16	175	N52	Through Thickness	Nickel Plated	5862K171	0000	0000
		11/16"	17	175	N52	Through Thickness	Nickel Plated	5862K172	0000	0000
		3/4"	10	170	N35	Through Thickness	Uncoated	5862K973	00000	00000
		3/4"	19	175	N52	Through Thickness	Nickel Plated	5862K173	0000	0000
		13/16"	22	175	N52	Through Thickness	Nickel Plated	5862K174	0000	0000


		7/8"	24	175	N52	Through Thickness	Nickel Plated	5862K175	0000	0000
		15/16"	26	175	N52	Through Thickness	Nickel Plated	5862K176	0000	0000
		1"	28	175	N52	Through Thickness	Nickel Plated	5862K113	0000	0000
		1 1/8"	31	175	N52	Through Thickness	Nickel Plated	5862K272	00000	00000
		1 1/4"	33	175	N52	Through Thickness	Nickel Plated	5862K273	00000	00000
		1 3/8"	36	175	N52	Through Thickness	Nickel Plated	5862K274	00000	00000
		1 1/2"	36	175	N52	Through Thickness	Nickel Plated	5862K275	00000	00000
		1 5/8"	39	175	N52	Through Thickness	Nickel Plated	5862K276	00000	00000
		1 3/4"	40	175	N52	Through Thickness	Nickel Plated	5862K277	00000	00000
		1 7/8"	43	175	N52	Through Thickness	Nickel Plated	5862K278	00000	00000


		2"	45	175	N52	Through Thickness	Nickel Plated	5862K279	00000	00000


		1/4" Thick



				1/16"	0.1	175	N52	Through Thickness	Nickel Plated	5862K177	0000	0000


				1/16"	0.2	175	N45	Through Diameter	Nickel Plated	5862K211	0000	0000
				1/8"	0.9	175	N45	Through Diameter	Nickel Plated	5862K212	0000	0000
				1/8"	1	175	N52	Through Thickness	Nickel Plated	5862K114	0000	0000
				3/16"	1.8	175	N52	Through Diameter	Nickel Plated	5862K423	0000	0000
				3/16"	2.4	175	N52	Through Thickness	Nickel Plated	5862K115	0000	0000
				3/16"	3	170	N35	Through Thickness	Uncoated	5862K964	0000	0000
				1/4"	2.5	300	N35SH	Through Thickness	Nickel Plated	58605K75	0000	0000
				1/4"	2.5	300	N35SH	Through Thickness	Uncoated	58605K35	0000	0000
				1/4"	3.6	175	N45	Through Diameter	Nickel Plated	5862K213	0000	0000
				1/4"	4.1	175	N52	Through Thickness	Nickel Plated	5862K116	0000	0000


5/16"				6	175	N52	Through Thickness	Nickel Plated	5862K178	0000	0000
0.32"	4			300	N35SH	Through Thickness	Uncoated	5862K44	0000	0000
3/8"	5			300	N35SH	Through Thickness	Nickel Plated	5862K65	0000	0000
3/8"	5			300	N35SH	Through Thickness	Uncoated	5862K55	0000	0000
3/8"	7			175	N45	Through Diameter	Nickel Plated	5862K214	0000	0000
3/8"	8			175	N52	Through Thickness	Nickel Plated	5862K117	0000	0000
7/16"	11			175	N52	Through Thickness	Nickel Plated	5862K179	0000	0000
1/2"	7			300	N35SH	Through Thickness	Nickel Plated	58605K77	00000	00000
1/2"	7			300	N35SH	Through Thickness	Uncoated	58605K37	00000	00000
1/2"	12			175	N45	Through Diameter	Nickel Plated	5862K215	0000	0000


1/2"	13			175	N52	Through Thickness	Nickel Plated	5862K118	0000	0000
9/16"	16			175	N52	Through Thickness	Nickel Plated	5862K181	0000	0000
5/8"	13			300	N38SH	Through Thickness	Nickel Plated	5862K87	00000	00000
5/8"	16			175	N45	Through Diameter	Nickel Plated	5862K216	00000	0000
5/8"	19			175	N52	Through Thickness	Nickel Plated	5862K119	0000	0000
11/16"	21			175	N52	Through Thickness	Nickel Plated	5862K182	0000	0000
3/4"	14			300	N35SH	Through Thickness	Nickel Plated	5862K92	00000	00000
3/4"	14			300	N35SH	Through Thickness	Uncoated	5862K91	00000	00000
3/4"	20			175	N45	Through Diameter	Nickel Plated	5862K217	00000	0000
3/4"	23			175	N52	Through Thickness	Nickel Plated	5862K121	0000	0000


13/16"	22			175	N52	Through Thickness	Nickel Plated	5862K281	00000	00000
7/8"	19			300	N38SH	Through Thickness	Nickel Plated	5862K897	00000	00000
7/8"	22			175	N52	Through Thickness	Nickel Plated	5862K252	00000	0000
7/8"	25			175	N45	Through Diameter	Nickel Plated	5862K218	00000	00000
15/16"	31			175	N52	Through Thickness	Nickel Plated	5862K282	00000	00000
1"	14			300	N35SH	Through Thickness	Uncoated	58605K45	00000	00000
1"	19			300	N35SH	Through Thickness	Nickel Plated	58605K85	00000	00000
1"	29			175	N45	Through Diameter	Nickel Plated	5862K219	00000	00000
1"	38			175	N52	Through Thickness	Nickel Plated	5862K253	00000	00000
1 1/8"	37			175	N52	Through Thickness	Nickel Plated	5862K283	00000	00000


1 1/4"	38			175	N52	Through Thickness	Nickel Plated	5862K284	00000	00000
1 3/8"	40			175	N52	Through Thickness	Nickel Plated	5862K285	00000	00000
1 1/2"	29			300	N35SH	Through Thickness	Nickel Plated	5862K15	00000	00000
1 1/2"	42			175	N52	Through Thickness	Nickel Plated	5862K286	00000	00000
1 5/8"	45			175	N52	Through Thickness	Nickel Plated	5862K287	00000	00000
1 3/4"	50			175	N52	Through Thickness	Nickel Plated	5862K288	00000	00000
1 7/8"	53			175	N52	Through Thickness	Nickel Plated	5862K289	00000	00000
2"	35			300	N35SH	Through Thickness	Nickel Plated	5862K43	000000	00000
2"	35			300	N35SH	Through Thickness	Uncoated	5862K42	000000	00000
2"	55			175	N52	Through Thickness	Nickel Plated	5862K291	00000	00000

2 1/4"	61	175	N52	Through Thickness	Nickel Plated	5862K292	00000	00000
2 1/2"	68	175	N52	Through Thickness	Nickel Plated	5862K293	000000	00000
2 3/4"	74	175	N52	Through Thickness	Nickel Plated	5862K294	000000	00000
3"	50	300	N35SH	Through Thickness	Nickel Plated	58605K87	000000	000000
3"	50	300	N35SH	Through Thickness	Uncoated	58605K47	000000	000000
3"	81	175	N52	Through Thickness	Nickel Plated	5862K295	000000	000000

3/8" Thick



		1/16"	0.2	175	N52	Through Thickness	Nickel Plated	5862K183	0000	0000


		1/8"	1	175	N52	Through Thickness	Nickel Plated	5862K122	0000	0000
		1/8"	1.1	130	N52	Through Diameter	Nickel Plated	5862K432	0000	0000
		3/16"	2.4	175	N52	Through Thickness	Nickel Plated	5862K184	0000	0000
		3/16"	2.5	130	N52	Through Diameter	Nickel Plated	5862K433	0000	0000
		1/4"	3.73	175	N52	Through Diameter	Nickel Plated	5862K424	0000	0000
		1/4"	4.4	175	N52	Through Thickness	Nickel Plated	5862K185	0000	0000
		5/16"	7	175	N52	Through Thickness	Nickel Plated	5862K186	0000	0000
		3/8"	10	170	N35	Through Thickness	Uncoated	5862K966	00000	00000
		3/8"	10	175	N52	Through Thickness	Nickel Plated	5862K123	0000	0000
		7/16"	13	175	N52	Through Thickness	Nickel Plated	5862K187	0000	0000


		1/2"	14	300	N35SH	Through Thickness	Nickel Plated	5862K94	00000	00000
		1/2"	14	300	N35SH	Through Thickness	Uncoated	5862K93	00000	00000
		1/2"	17	175	N52	Through Thickness	Nickel Plated	5862K124	0000	0000
		9/16"	20	175	N52	Through Thickness	Nickel Plated	5862K296	00000	0000
		5/8"	24	175	N52	Through Thickness	Nickel Plated	5862K297	0000	0000
		11/16"	27	175	N52	Through Thickness	Nickel Plated	5862K298	00000	0000
		3/4"	30	175	N52	Through Thickness	Nickel Plated	5862K299	00000	0000
		13/16"	35	175	N52	Through Thickness	Nickel Plated	5862K301	00000	00000
		7/8"	15	300	N35SH	Through Thickness	Uncoated	58605K41	00000	00000
		7/8"	39	175	N52	Through Thickness	Nickel Plated	5862K302	00000	00000


		15/16"	43	175	N52	Through Thickness	Nickel Plated	5862K303	00000	00000
		1"	47	175	N52	Through Thickness	Nickel Plated	5862K304	00000	00000
		1 1/8"	53	175	N52	Through Thickness	Nickel Plated	5862K305	00000	00000
		1 1/4"	60	175	N52	Through Thickness	Nickel Plated	5862K306	00000	00000
		1 3/8"	66	175	N52	Through Thickness	Nickel Plated	5862K307	00000	00000
		1 1/2"	40	300	N35SH	Through Thickness	Nickel Plated	5862K17	00000	00000
		1 1/2"	72	175	N52	Through Thickness	Nickel Plated	5862K308	00000	00000
		1 5/8"	67	175	N52	Through Thickness	Nickel Plated	5862K309	00000	00000
		1 7/8"	96	175	N52	Through Thickness	Nickel Plated	5862K312	00000	00000
		2"	97	175	N52	Through Thickness	Nickel Plated	5862K313	00000	00000


		1/2" Thick



				1/16"	0.2	175	N52	Through Thickness	Nickel Plated	5862K188	0000	0000


				1/8"	1	175	N52	Through Thickness	Nickel Plated	5862K125	0000	0000
				3/16"	2.5	175	N52	Through Thickness	Nickel Plated	5862K126	0000	0000
				1/4"	4.7	175	N52	Through Thickness	Nickel Plated	5862K127	0000	0000
				5/16"	8	175	N52	Through Thickness	Nickel Plated	5862K189	0000	0000
				3/8"	11	175	N52	Through Thickness	Nickel Plated	5862K128	0000	0000
				7/16"	14	175	N52	Through Thickness	Nickel Plated	5862K191	0000	0000
				1/2"	18	175	N52	Through Thickness	Nickel Plated	5862K129	0000	0000
				1/2"	19	300	N35SH	Through Thickness	Nickel Plated	5862K29	00000	00000
				1/2"	19	300	N35SH	Through Thickness	Uncoated	5862K28	00000	00000
				9/16"	23	175	N52	Through Thickness	Nickel Plated	5862K314	00000	00000


				5/8"	24	175	N52	Through Thickness	Nickel Plated	5862K254	00000	00000
				5/8"	27	300	N38SH	Through Thickness	Nickel Plated	5862K88	00000	00000
				11/16"	31	175	N52	Through Thickness	Nickel Plated	5862K315	00000	00000
3/4"				28	300	N35SH	Through Thickness	Nickel Plated	5862K33	00000	00000
3/4"	28			300	N35SH	Through Thickness	Uncoated	5862K32	00000	00000
3/4"	36			175	N52	Through Thickness	Nickel Plated	5862K255	00000	00000
13/16"	40			175	N52	Through Thickness	Nickel Plated	5862K316	00000	00000
7/8"	39			175	N52	Through Thickness	Nickel Plated	5862K256	00000	00000
15/16"	50			175	N52	Through Thickness	Nickel Plated	5862K317	00000	00000
1"	35			300	N35SH	Through Thickness	Nickel Plated	5862K39	000000	00000


1"	35			300	N35SH	Through Thickness	Uncoated	5862K38	000000	00000
1"	54			175	N52	Through Thickness	Nickel Plated	5862K257	00000	00000
1 1/8"	67			175	N52	Through Thickness	Nickel Plated	5862K318	00000	00000
1 1/4"	76			175	N52	Through Thickness	Nickel Plated	5862K319	00000	00000
1 3/8"	84			175	N52	Through Thickness	Nickel Plated	5862K321	00000	00000
1 1/2"	55			300	N35SH	Through Thickness	Nickel Plated	5862K19	000000	00000
1 1/2"	89			175	N52	Through Thickness	Nickel Plated	5862K322	00000	00000
1 5/8"	98			175	N52	Through Thickness	Nickel Plated	5862K323	00000	00000
1 3/4"	105			175	N52	Through Thickness	Nickel Plated	5862K324	00000	00000
1 7/8"	111			175	N52	Through Thickness	Nickel Plated	5862K325	000000	00000


2"	130			175	N52	Through Thickness	Nickel Plated	5862K326	000000	00000
2 1/2"	157			175	N52	Through Thickness	Nickel Plated	5862K328	000000	000000
2 3/4"	171			175	N52	Through Thickness	Nickel Plated	5862K329	000000	000000
3"	184			175	N52	Through Thickness	Nickel Plated	5862K331	000000	000000


3/4" Thick



				1/4"	5	175	N52	Through Thickness	Nickel Plated	5862K131	0000	0000


				3/8"	11	175	N52	Through Thickness	Nickel Plated	5862K192	0000	0000
				1/2"	19	175	N52	Through Thickness	Nickel Plated	5862K132	0000	0000
				1/2"	32	300	N38SH	Through Thickness	Nickel Plated	5862K84	00000	0000
				5/8"	31	175	N52	Through Thickness	Nickel Plated	5862K332	00000	00000
				3/4"	40	175	N52	Through Thickness	Nickel Plated	5862K333	00000	00000
				1"	69	175	N52	Through Thickness	Nickel Plated	5862K335	00000	00000
				1 1/2"	115	175	N52	Through Thickness	Nickel Plated	5862K336	000000	00000
				3"	353	175	N52	Through Thickness	Nickel Plated	5862K339	000000	000000


		1" Thick



				1/4"	5	175	N52	Through Thickness	Nickel Plated	5862K133	0000	0000


				3/8"	11	175	N52	Through Thickness	Nickel Plated	5862K134	0000	0000
				3/8"	29	170	N35	Through Thickness	Uncoated	5862K968	00000	00000
				1/2"	21	175	N52	Through Thickness	Nickel Plated	5862K135	00000	0000
				5/8"	33	175	N52	Through Thickness	Nickel Plated	5862K341	00000	00000
				3/4"	45	175	N52	Through Thickness	Nickel Plated	5862K342	00000	00000
				7/8"	58	175	N52	Through Thickness	Nickel Plated	5862K343	00000	00000
				1"	76	175	N52	Through Thickness	Nickel Plated	5862K344	00000	00000
				1 1/2"	150	175	N52	Through Thickness	Nickel Plated	5862K136	00000	00000
				2"	258	175	N52	Through Thickness	Nickel Plated	5862K193	000000	00000
				2 1/2"	376	175	N52	Through Thickness	Nickel Plated	5862K194	000000	000000


				3"	495	175	N52	Through Thickness	Nickel Plated	5862K195	000000	000000


				2" Thick



						19/64"	7	130	N52	Through Thickness	Nickel Plated	5862K427	00000	00000


						4" Thick



								1/4"	5	130	N52	Through Thickness	Nickel Plated	5862K428	00000	00000

Magnets With Adhesive Back


	Magnetized Through Thickness	Adhesive on North Pole	Adhesive on South Pole

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

										North Pole			South Pole
						Adhesive					Each			Each
	OD	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Direction of Magnetization	Material	Mfr.	Mfr. Model	Finish		1-49	50-Up		1-49	50-Up
1/16" Thick



		3/16"	0.9	170	N35	Through Thickness	Acrylic Plastic	—	—	Nickel Plated	7048T37	00000	00000	7048T38	00000	00000


		3/8"	2.5	175	N52	Through Thickness	—	3M	Very High Bond	Nickel Plated	7048T65	0000	0000	7048T59	0000	0000
		1/2"	3.4	170	N45	Through Thickness	—	3M	Very High Bond	Nickel Plated	7048T15	0000	0000	7048T16	0000	0000
		1/2"	3.6	175	N52	Through Thickness	—	3M	Very High Bond	Nickel Plated	7048T56	0000	0000	7048T61	0000	0000
		3/4"	4.5	170	N45	Through Thickness	—	3M	Very High Bond	Nickel Plated	7048T17	0000	0000	7048T18	0000	0000
		3/4"	6	175	N52	Through Thickness	—	3M	Very High Bond	Nickel Plated	7048T57	0000	0000	7048T62	0000	0000


		0.08" Thick



				1"	6	170	N35	Through Thickness	—	3M	Very High Bond	Nickel Plated	7048T19	00000	0000	7048T21	00000	0000


				1"	11	175	N52	Through Thickness	—	3M	Very High Bond	Nickel Plated	7048T58	0000	0000	7048T63	0000	0000


				0.1" Thick



						1/4"	1.9	170	N35	Through Thickness	Acrylic Plastic	—	—	Nickel Plated	7048T35	0000	0000	7048T36	0000	0000


						3/8"	2.9	170	N35	Through Thickness	Acrylic Plastic	—	—	Nickel Plated	7048T42	0000	0000	7048T43	0000	0000
						1/2"	4.6	175	N52	Through Thickness	Acrylic Plastic	—	—	Nickel Plated	7048T66	0000	0000	7048T67	0000	0000


						0.118" Thick



								5/16"	2.9	170	N35	Through Thickness	Acrylic Plastic	—	—	Nickel Plated	7048T39	0000	0000	7048T41	0000	0000


								15/32"	4	170	N35	Through Thickness	Acrylic Plastic	—	—	Nickel Plated	7048T44	0000	0000	7048T45	0000	0000
								45/64"	6	170	N35	Through Thickness	Acrylic Plastic	—	—	Nickel Plated	7048T51	00000	00000	7048T52	00000	00000


								1/8" Thick



										1/2"	4	170	N35	Through Thickness	Acrylic Plastic	—	—	Nickel Plated	7048T46	00000	0000	7048T47	00000	0000


										3/16" Thick



												3/4"	10	170	N35	Through Thickness	Acrylic Plastic	—	—	Nickel Plated	7048T53	00000	00000	7048T54	00000	00000


												1/4" Thick



														1/2"	9	170	N35	Through Thickness	Acrylic Plastic	—	—	Nickel Plated	7048T48	00000	00000	7048T49	00000	00000

Magnets With Unthreaded Hole


	Magnetized Through Thickness	Magnetized Through Diameter

N35SH and N38SH—These magnets are less likely than other grades to lose magnetic strength when exposed to temperatures up to 300°F.

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

										Each
	OD	Hole Dia.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Direction of Magnetization	Mounting Hole Style	Finish		1-49	50-Up
1/16" Thick



		3/8"	1/8"	1.5	300	N35SH	Through Thickness	Straight	Nickel Plated	3360K81	00000	00000


		0.1" Thick



				1/4"	1/8"	1.3	300	N38SH	Through Thickness	Straight	Nickel Plated	3360K11	0000	0000


				3/8"	1/8"	2.2	300	N38SH	Through Thickness	Straight	Nickel Plated	3360K7	0000	0000
				1/2"	1/8"	3	300	N38SH	Through Thickness	Straight	Nickel Plated	3360K72	0000	0000
				1/2"	0.2"	3	300	N38SH	Through Thickness	Straight	Nickel Plated	3360K31	0000	0000
				1"	1/8"	7	300	N38SH	Through Thickness	Straight	Nickel Plated	3360K75	0000	0000
				1"	1/4"	6	300	N38SH	Through Thickness	Straight	Nickel Plated	3360K77	00000	00000
				1"	1/2"	7	300	N38SH	Through Thickness	Straight	Nickel Plated	3360K51	00000	00000


				1/8" Thick



						1/4"	0.103"	3.5	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K223	0000	0000


						1/4"	0.107"	1.2	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K931	0000	0000
						1/4"	1/8"	1.5	175	N45	Through Thickness	Straight	Nickel Plated	3360K847	0000	0000
						1/4"	1/8"	2.6	175	N45	Through Diameter	Straight	Nickel Plated	3360K827	0000	0000
						3/8"	1/8"	3.8	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K919	0000	0000
						3/8"	1/8"	4	175	N45	Through Thickness	Straight	Nickel Plated	3360K848	0000	0000
						3/8"	1/8"	4.2	175	N45	Through Diameter	Straight	Nickel Plated	3360K828	0000	0000
						3/8"	1/8"	4.5	210	N35	Through Thickness	Countersunk	Nickel Plated	5862K921	0000	0000
						3/8"	0.135"	2.5	170	N35	Through Thickness	Countersunk	Nickel Plated	5862K12	0000	0000
						1/2"	1/8"	6	175	N45	Through Thickness	Straight	Nickel Plated	3360K849	0000	0000
						1/2"	1/8"	6	175	N45	Through Diameter	Straight	Nickel Plated	3360K829	0000	0000


						1/2"	0.135"	5.72	170	N35	Through Thickness	Countersunk	Nickel Plated	5862K14	0000	0000
						1/2"	0.136"	5.5	175	N42	Through Thickness	Countersunk	Nickel Plated	5862K922	0000	0000
						1/2"	0.153"	6	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K224	0000	0000
						5/8"	1/8"	8	175	N45	Through Thickness	Straight	Nickel Plated	3360K851	0000	0000
						5/8"	1/8"	8	175	N45	Through Diameter	Straight	Nickel Plated	3360K831	0000	0000
						5/8"	0.134"	6.8	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K924	0000	0000
						5/8"	0.165"	6.5	170	N35	Through Thickness	Countersunk	Nickel Plated	5862K16	0000	0000
						5/8"	0.17"	7.1	175	N42	Through Thickness	Countersunk	Nickel Plated	5862K923	0000	0000
						3/4"	1/8"	10	175	N45	Through Thickness	Straight	Nickel Plated	3360K852	0000	0000
						3/4"	1/8"	10	175	N45	Through Diameter	Straight	Nickel Plated	3360K832	0000	0000


						3/4"	0.188"	6.94	170	N35	Through Thickness	Countersunk	Nickel Plated	5862K18	00000	00000
						3/4"	0.283"	9	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K225	0000	0000
						7/8"	1/8"	11.5	175	N45	Through Thickness	Straight	Nickel Plated	3360K853	0000	0000
						7/8"	1/8"	11.5	175	N45	Through Diameter	Straight	Nickel Plated	3360K833	00000	0000
						7/8"	0.188"	8.11	170	N35	Through Thickness	Countersunk	Nickel Plated	5862K34	00000	00000
						1"	1/4"	13	175	N45	Through Thickness	Straight	Nickel Plated	3360K854	00000	0000
						1"	1/4"	13	175	N45	Through Diameter	Straight	Nickel Plated	3360K834	00000	0000


						3/16" Thick



3/4"	0.154"							14.7	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K925	0000	0000


1"	0.211"							22	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K229	00000	00000
1"	0.213"							16.4	170	N35	Through Thickness	Countersunk	Nickel Plated	5862K35	00000	00000
1"	0.275"							22	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K226	00000	00000


1/4" Thick



		1/4"	1/8"					2.3	300	N38SH	Through Thickness	Straight	Nickel Plated	3360K21	0000	0000


		1/4"	1/8"					2.5	175	N45	Through Thickness	Straight	Nickel Plated	3360K855	0000	0000
		1/4"	1/8"					2.5	175	N45	Through Diameter	Straight	Nickel Plated	3360K835	0000	0000
		3/8"	1/8"					5	300	N38SH	Through Thickness	Straight	Nickel Plated	3360K71	0000	0000
		3/8"	1/8"					6	175	N45	Through Thickness	Straight	Nickel Plated	3360K856	0000	0000
		3/8"	1/8"					6.5	175	N45	Through Diameter	Straight	Nickel Plated	3360K836	0000	0000
		1/2"	1/8"					8	300	N38SH	Through Thickness	Straight	Nickel Plated	3360K73	0000	0000
		1/2"	1/8"					11	175	N45	Through Thickness	Straight	Nickel Plated	3360K857	0000	0000
		1/2"	1/8"	11				175	N45	Through Diameter	Straight	Nickel Plated	3360K837	0000	0000
		1/2"	0.135"	11	175			N45	Through Thickness	Countersunk	Nickel Plated	5862K227	0000	0000
		1/2"	0.2"	8	300			N38SH	Through Thickness	Straight	Nickel Plated	3360K41	00000	00000


		5/8"	1/8"	15.5	175			N45	Through Thickness	Straight	Nickel Plated	3360K858	0000	0000
		5/8"	1/8"	15.5	175			N45	Through Diameter	Straight	Nickel Plated	3360K838	00000	0000
		3/4"	1/8"	19.5	175			N45	Through Thickness	Straight	Nickel Plated	3360K859	0000	0000
		3/4"	1/8"	19.5	175			N45	Through Diameter	Straight	Nickel Plated	3360K839	00000	0000
		3/4"	0.166"	18	175			N45	Through Thickness	Countersunk	Nickel Plated	5862K228	0000	0000
		7/8"	1/8"	24	175			N45	Through Thickness	Straight	Nickel Plated	3360K861	00000	0000
		7/8"	1/8"	24	175			N45	Through Diameter	Straight	Nickel Plated	3360K841	00000	00000
		7/8"	0.177"	22	175			N45	Through Thickness	Countersunk	Nickel Plated	5862K926	00000	0000
		1"	1/8"	19	300			N38SH	Through Thickness	Straight	Nickel Plated	3360K76	00000	00000
		1"	0.217"	27	175			N45	Through Thickness	Countersunk	Nickel Plated	5862K927	00000	00000


		1"	1/4"	16	300			N38SH	Through Thickness	Straight	Nickel Plated	3360K78	00000	00000
		1"	1/4"	27.5	175			N45	Through Thickness	Straight	Nickel Plated	3360K862	00000	00000
		1"	1/4"	27.5	175			N45	Through Diameter	Straight	Nickel Plated	3360K842	00000	00000
		1"	1/2"	20	300			N38SH	Through Thickness	Straight	Nickel Plated	3360K61	00000	00000
		1 1/4"	0.194"	30.5	175			N45	Through Thickness	Countersunk	Nickel Plated	5862K932	00000	00000
		1 1/4"	0.217"	30	175			N45	Through Thickness	Countersunk	Nickel Plated	5862K928	00000	00000


		3/8" Thick



				1 1/2"	0.211"			56	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K933	00000	00000


				1 1/2"	0.266"			55.2	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K929	00000	00000


				1/2" Thick



								1/2"	1/8"	14.4	175	N45	Through Thickness	Straight	Nickel Plated	3360K863	0000	0000


						1/2"		1/8"	14.5	175	N45	Through Diameter	Straight	Nickel Plated	3360K843	00000	0000
						1/2"	1/8"	16	300	N38SH	Through Thickness	Straight	Nickel Plated	3360K74	00000	00000
						3/4"	0.213"	23	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K231	00000	00000
						1"	0.212"	43	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K232	00000	00000
						1"	1/2"	21	300	N38SH	Through Thickness	Straight	Nickel Plated	3360K79	00000	00000
						2"	0.281"	96.5	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K934	00000	00000


						3/4" Thick



						1"	1/2"	32	300	N38SH	Through Thickness	Straight	Nickel Plated	3360K8	00000	00000


						1" Thick



								1/2"	1/4"	13	175	N45	Through Thickness	Straight	Nickel Plated	3360K864	00000	00000


								1/2"	1/4"	13	175	N45	Through Diameter	Straight	Nickel Plated	3360K844	00000	00000


								1 1/2" Thick



										1/2"	1/4"	13.5	175	N45	Through Thickness	Straight	Nickel Plated	3360K865	00000	00000


										1/2"	1/4"	13.5	175	N45	Through Diameter	Straight	Nickel Plated	3360K845	00000	00000


										2" Thick



												1/2"	1/4"	13.6	175	N45	Through Diameter	Straight	Nickel Plated	3360K846	00000	00000


												1/2"	1/4"	13.7	175	N45	Through Thickness	Straight	Nickel Plated	3360K866	00000	00000

Threaded Encased Neodymium Disc Magnets


1	2	3	4

5	6	7

Magnetized

Through

Thickness

Magnetized

Through

Diameter

Thread powerful and durable magnets into position, then readjust if needed. A protective case shields these from the elements as well as cracks and chips when handling, mounting, or sweeping them. With the highest strength-to-size ratio of any magnet, they deliver powerful pull force even in tight spaces.

Magnets With Threaded Hole


1	2	3


Magnetized Through Thickness	Magnetized Through Diameter

Internally threaded for secure mounting with screws or bolts.

Steel Case—Maximizes holding power by concentrating magnetic force.

Zinc-Plated Steel Case—Withstands occasional exposure to moisture.

Aluminum Case—Lightweight and corrosion-resistant, this case is best for applications with weight limitations. However, the magnetic strength is lower than steel.

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

									Thread			Each
	Style	Thk.	OD	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Direction of Magnetization	Mounting Hole Style	Size	Dp.		1-49	50-Up
Steel Case



		1	1/2"	3/8"	6	170	N35	Through Thickness	Straight	8-32	0.1"	5679K11	000000	000000


		1	1/2"	1/2"	16	170	N35	Through Thickness	Straight	10-32	0.12"	5679K13	00000	00000
		1	1/2"	3/4"	40	170	N35	Through Thickness	Straight	10-32	0.15"	5679K15	00000	00000
		1	1/2"	1"	90	170	N35	Through Thickness	Straight	1/4"-20	0.15"	5679K17	00000	00000
		1	1/2"	1 1/4"	130	170	N35	Through Thickness	Straight	5/16"-18	0.15"	5679K21	00000	00000


		Zinc-Plated Steel Case



				2	13/64"	5/8"	18	175	N42	Through Thickness	Straight	8-32	0.27"	5679K53	0000	0000


				2	9/32"	51/64"	28	175	N42	Through Thickness	Straight	8-32	0.27"	5679K54	0000	0000
				2	5/16"	0.984", 63/64"	55	175	N42	Through Thickness	Straight	10-24	0.3"	5679K55	0000	0000
				2	5/16"	1 17/64"	75	175	N42	Through Thickness	Straight	1/4"-20	0.35"	5679K56	0000	0000
				2	5/16"	1 27/64"	100	175	N42	Through Thickness	Straight	1/4"-20	0.38"	5679K57	0000	0000
				2	23/64"	1 21/32"	150	175	N42	Through Thickness	Straight	5/16"-18	0.44"	5679K58	00000	0000
				2	29/64"	1 57/64"	175	175	N42	Through Thickness	Straight	5/16"-18	0.44"	5679K59	00000	00000
				2	4.5 mm	6 mm	1	175	—	Through Thickness	Straight	M3 × 0.5 mm	7 mm	5679K88	0000	0000
				2	4.5 mm	8 mm	2.5	175	—	Through Thickness	Straight	M3 × 0.5 mm	7 mm	5679K89	0000	0000
				2	4.5 mm	10 mm	5.5	175	—	Through Thickness	Straight	M3 × 0.5 mm	7 mm	5679K91	0000	0000
				2	4.5 mm	13 mm	13	175	—	Through Thickness	Straight	M3 × 0.5 mm	7 mm	5679K92	0000	0000


				2	4.5 mm	16 mm	20.5	175	—	Through Thickness	Straight	M4 × 0.7 mm	7 mm	5679K93	0000	0000
				2	6 mm	20 mm	30.5	175	—	Through Thickness	Straight	M4 × 0.7 mm	7 mm	5679K94	0000	0000
				2	7 mm	25 mm	44	175	—	Through Thickness	Straight	M4 × 0.7 mm	7 mm	5679K95	0000	0000
				2	7 mm	32 mm	77	175	—	Through Thickness	Straight	M5 × 0.8 mm	8.5 mm	5679K96	00000	00000
				3	7 mm	32 mm	70	170	—	Through Thickness	Straight	M5 × 0.8 mm	5.5 mm	5679K27	00000	00000
				3	8 mm	40 mm	110	170	—	Through Thickness	Straight	M5 × 0.8 mm	10.5 mm	5679K28	00000	00000


				Aluminum Case



						1	29/64"	1/2"	5.5	170	N38	Through Diameter	Straight	M5 × 0.8 mm	0.23"	5867K31	00000	00000


						1	1/2"	1/4"	0.5	170	N35	Through Thickness	Straight	6-32	1/4"	5867K21	00000	0000
						1	1/2"	3/8"	2.6	170	N35	Through Thickness	Straight	8-32	1/4"	5867K22	00000	0000
						1	1/2"	1/2"	5	170	N35	Through Thickness	Straight	10-24	1/4"	5867K23	00000	00000
						1	1/2"	5/8"	8	170	N35	Through Thickness	Straight	10-24	1/4"	5867K24	00000	00000
						1	1/2"	3/4"	12	170	N35	Through Thickness	Straight	10-24	1/4"	5867K25	00000	00000
						1	1/2"	1"	15	170	N35	Through Thickness	Straight	1/4"-20	1/4"	5867K26	00000	00000
						1	39/64"	5/8"	17.5	170	N38	Through Diameter	Straight	M6 × 1 mm	0.23"	5867K32	00000	00000
						1	25/32"	7/8"	35	170	N38	Through Diameter	Straight	M6 × 1 mm	0.23"	5867K33	00000	00000
						1	63/64"	63/64"	55	170	N38	Through Diameter	Straight	M6 × 1 mm	0.23"	5867K34	00000	00000
						1	1 3/16"	3/4"	35	170	N35	Through Diameter	Straight	1/4"-20	1/4"	5867K82	00000	00000


						1	1 5/16"	1"	85	170	N35	Through Diameter	Straight	1/4"-20	5/16"	5867K83	00000	00000
						1	2 1/16"	1 1/2"	200	170	N35	Through Diameter	Straight	5/16"-18	5/16"	5867K87	000000	000000
						1	2 7/16"	2"	340	170	N35	Through Diameter	Straight	3/8"-16	5/16"	5867K89	000000	000000

Magnets With Threaded Stud


4	5	6	7

Screw into tapped holes for secure mounting that’s also removable.

Zinc-Plated Steel Case—Withstands occasional exposure to moisture.

	Style	Thk.	OD	Overall Ht.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Thread Size	Choose a Stud Length	Pkg. Qty.		Pkg.
Zinc-Plated Steel Case



		4	13/64"	5/8"	1/2"	18	175	N42	8-32	0.3"	1	3506K61	00000


		4	9/32"	51/64"	0.576"	28	175	N42	8-32	0.3"	1	3506K62	0000
		4	5/16"	63/64"	0.615"	55	175	N42	10-24	3/8"	1	3506K63	0000
		4	5/16"	1 17/64"	0.685"	75	175	N42	1/4"-20	3/8"	1	3506K64	0000
		4	5/16"	1 27/64"	0.815"	100	175	N42	1/4"-20	1/2"	1	3506K65	00000
		4	23/64"	1 21/32"	0.856"	150	175	N42	5/16"-18	1/2"	1	3506K66	00000
		4	29/64"	1 57/64"	0.953"	175	175	N42	5/16"-18	1/2"	1	3506K67	00000
		4	4.5 mm	10 mm	12.5 mm	5	175	Not Rated	M4 × 0.7 mm	8 mm	1	1079N511	0000
		4	4.5 mm	13 mm	12.5 mm	13	175	Not Rated	M5 × 0.8 mm	8 mm	1	1079N512	0000
		4	4.5 mm	16 mm	12.5 mm	21	175	Not Rated	M6 × 1 mm	8 mm	1	1079N513	00000
		4	6 mm	20 mm	16 mm	31	175	Not Rated	M6 × 1 mm	10 mm	1	1079N514	00000


		4	7 mm	25 mm	17 mm	44	175	Not Rated	M6 × 1 mm	10 mm	1	1079N515	00000
		4	7 mm	32 mm	17 mm	78	175	Not Rated	M6 × 1 mm	10 mm	1	1079N516	00000
		4	9 mm	40 mm	20 mm	100	175	N35	M6 × 1 mm	11 mm	1	3506K71	00000
		5	4 mm	10 mm	—	5	170	Not Rated	M6 × 1 mm	12 mm, 16 mm, 20 mm, 25 mm, 30 mm	1	1079N41	00000
		5	4 mm	10 mm	16 mm	5	170	Not Rated	M6 × 1 mm	12 mm, 16 mm, 20 mm, 25 mm, 30 mm	1	1079N27	00000
		5	4 mm	10 mm	20 mm	5	170	Not Rated	M6 × 1 mm	12 mm, 16 mm, 20 mm, 25 mm, 30 mm	1	1079N28	00000
		5	4 mm	10 mm	24 mm	5	170	Not Rated	M6 × 1 mm	12 mm, 16 mm, 20 mm, 25 mm, 30 mm	1	1079N29	00000
		5	4 mm	10 mm	29 mm	5	170	Not Rated	M6 × 1 mm	12 mm, 16 mm, 20 mm, 25 mm, 30 mm	1	1079N31	00000
		5	4 mm	10 mm	34 mm	5	170	Not Rated	M6 × 1 mm	12 mm, 16 mm, 20 mm, 25 mm, 30 mm	1	1079N32	00000
		5	5.3 mm	13 mm	—	11	170	Not Rated	M8 × 1.25 mm	16 mm, 20 mm, 25 mm, 30 mm, 40 mm	1	1079N42	00000


		5	5.3 mm	13 mm	21 mm	11	170	Not Rated	M8 × 1.25 mm	16 mm, 20 mm, 25 mm, 30 mm, 40 mm	1	1079N33	00000
		5	5.3 mm	13 mm	25 mm	11	170	Not Rated	M8 × 1.25 mm	16 mm, 20 mm, 25 mm, 30 mm, 40 mm	1	1079N34	00000
		5	5.3 mm	13 mm	30 mm	11	170	Not Rated	M8 × 1.25 mm	16 mm, 20 mm, 25 mm, 30 mm, 40 mm	1	1079N35	00000
		5	5.3 mm	13 mm	35 mm	11	170	Not Rated	M8 × 1.25 mm	16 mm, 20 mm, 25 mm, 30 mm, 40 mm	1	1079N36	00000
		5	5.3 mm	13 mm	45 mm	11	170	Not Rated	M8 × 1.25 mm	16 mm, 20 mm, 25 mm, 30 mm, 40 mm	1	1079N37	00000
		5	6.4 mm	17 mm	—	16	170	Not Rated	M10 × 1.5 mm	20 mm, 25 mm, 30 mm, 40 mm, 50 mm	1	1079N43	00000
		5	6.4 mm	17 mm	26 mm	16	170	Not Rated	M10 × 1.5 mm	20 mm, 25 mm, 30 mm, 40 mm, 50 mm	1	1079N11	00000
		5	6.4 mm	17 mm	31 mm	16	170	Not Rated	M10 × 1.5 mm	20 mm, 25 mm, 30 mm, 40 mm, 50 mm	1	1079N12	00000
		5	6.4 mm	17 mm	36 mm	16	170	Not Rated	M10 × 1.5 mm	20 mm, 25 mm, 30 mm, 40 mm, 50 mm	1	1079N13	00000
		5	6.4 mm	17 mm	46 mm	16	170	Not Rated	M10 × 1.5 mm	20 mm, 25 mm, 30 mm, 40 mm, 50 mm	1	1079N14	00000


		5	6.4 mm	17 mm	56 mm	16	170	Not Rated	M10 × 1.5 mm	20 mm, 25 mm, 30 mm, 40 mm, 50 mm	1	1079N15	00000
		5	7.5 mm	19 mm	—	24	170	Not Rated	M12 × 1.75 mm	25 mm, 30 mm, 40 mm, 50 mm, 60 mm	1	1079N44	00000
		5	7.5 mm	19 mm	33 mm	24	170	Not Rated	M12 × 1.75 mm	25 mm, 30 mm, 40 mm, 50 mm, 60 mm	1	1079N16	00000
		5	7.5 mm	19 mm	38 mm	24	170	Not Rated	M12 × 1.75 mm	25 mm, 30 mm, 40 mm, 50 mm, 60 mm	1	1079N17	00000
		5	7.5 mm	19 mm	48 mm	24	170	Not Rated	M12 × 1.75 mm	25 mm, 30 mm, 40 mm, 50 mm, 60 mm	1	1079N18	00000
		5	7.5 mm	19 mm	58 mm	24	170	Not Rated	M12 × 1.75 mm	25 mm, 30 mm, 40 mm, 50 mm, 60 mm	1	1079N19	00000
		5	7.5 mm	19 mm	68 mm	24	170	Not Rated	M12 × 1.75 mm	25 mm, 30 mm, 40 mm, 50 mm, 60 mm	1	1079N21	00000
		5	10 mm	24 mm	—	32	170	Not Rated	M16 × 2 mm	30 mm, 40 mm, 50 mm, 60 mm, 80 mm	1	1079N45	00000
		5	10 mm	24 mm	40 mm	32	170	Not Rated	M16 × 2 mm	30 mm, 40 mm, 50 mm, 60 mm, 80 mm	1	1079N22	00000
		5	10 mm	24 mm	50 mm	32	170	Not Rated	M16 × 2 mm	30 mm, 40 mm, 50 mm, 60 mm, 80 mm	1	1079N23	00000


		5	10 mm	24 mm	60 mm	32	170	Not Rated	M16 × 2 mm	30 mm, 40 mm, 50 mm, 60 mm, 80 mm	1	1079N24	00000
		5	10 mm	24 mm	70 mm	32	170	Not Rated	M16 × 2 mm	30 mm, 40 mm, 50 mm, 60 mm, 80 mm	1	1079N25	00000
		5	10 mm	24 mm	90 mm	32	170	Not Rated	M16 × 2 mm	30 mm, 40 mm, 50 mm, 60 mm, 80 mm	1	1079N26	00000
		6	1/4"	1/2"	—	6	170	N35	—	—	1	3506K23	0000
		6	1/4"	5/8"	—	16	170	N35	—	—	1	3506K25	0000
		6	1/4"	3/4"	—	16	170	N35	—	—	1	3506K53	0000
		6	17/64"	1"	—	26	170	N35	—	—	1	3506K51	0000
		6	17/64"	1 1/8"	—	30	170	N35	—	—	1	3506K29	00000
		6	17/64"	1 1/2"	—	35	170	N35	—	—	1	3506K52	00000
		6	9/32"	7/8"	—	23	170	N35	—	—	1	3506K27	0000

7	0.337"	15/32"	—	4.4	180	N42	—	0.394"	2	3506K34	0000
7	25/64"	19/32"	—	4.4	180	N42	—	0.453"	2	3506K38	00000

Neodymium Rectangle Magnets

Unmatched strength in a compact shape. These magnets have the highest strength-to-size ratio of any magnet, delivering powerful pull force even in tight spaces. Their flat, rectangular shape creates a strong, even pull across surfaces and fits easily into slots or grooves. However, they may lose magnetic strength at high temperatures. Also known as rare earth magnets.

Standard Magnets


	Magnetized Through Thickness

N38SH—These magnets are less likely than other grades to lose magnetic strength when exposed to temperatures up to 300°F.

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

Uncoated—Apply whatever finish best guards against rust and wear in your environment. If left uncoated, expect corrosion and less durability.

									Each
	Wd.	Lg.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Direction of Magnetization	Finish		1-49	50-Up
0.1" Thick



		1/4"	1/4"	1.7	300	N38SH	Through Thickness	Nickel Plated	5848K51	00000	00000


		1/4"	1/4"	1.7	300	N38SH	Through Thickness	Uncoated	5848K31	0000	0000
		1/4"	5/8"	3	300	N38SH	Through Thickness	Nickel Plated	5848K78	0000	0000
		1/4"	5/8"	3	300	N38SH	Through Thickness	Uncoated	5848K77	0000	0000
		1/4"	3/4"	3	300	N38SH	Through Thickness	Nickel Plated	5848K82	0000	0000
		1/4"	3/4"	3	300	N38SH	Through Thickness	Uncoated	5848K81	0000	0000
		1/4"	1"	4	300	N38SH	Through Thickness	Nickel Plated	5848K68	0000	0000
		1/4"	1"	4	300	N38SH	Through Thickness	Uncoated	5848K67	0000	0000
		1/4"	2"	6	300	N38SH	Through Thickness	Nickel Plated	5848K74	00000	0000
		1/4"	2"	6	300	N38SH	Through Thickness	Uncoated	5848K73	00000	0000
		3/8"	3/8"	3	300	N38SH	Through Thickness	Nickel Plated	5848K14	0000	0000


		3/8"	3/8"	3	300	N38SH	Through Thickness	Uncoated	5848K13	0000	0000
		1/2"	1/2"	4	300	N38SH	Through Thickness	Nickel Plated	5848K18	0000	0000
		1/2"	1/2"	4	300	N38SH	Through Thickness	Uncoated	5848K17	0000	0000
		5/8"	5/8"	5	300	N38SH	Through Thickness	Nickel Plated	5848K24	0000	0000
		5/8"	5/8"	5	300	N38SH	Through Thickness	Uncoated	5848K23	0000	0000
		3/4"	3/4"	6	300	N38SH	Through Thickness	Nickel Plated	5848K28	00000	00000
		3/4"	3/4"	6	300	N38SH	Through Thickness	Uncoated	5848K27	00000	00000
		1"	1"	8	300	N38SH	Through Thickness	Nickel Plated	5848K66	00000	00000
		1"	1"	8	300	N38SH	Through Thickness	Uncoated	5848K65	00000	00000


		1/8" Thick



				1/8"	1/8"	1.5	300	N38SH	Through Thickness	Nickel Plated	5848K41	0000	0000


				1/4"	1/4"	2.7	300	N38SH	Through Thickness	Nickel Plated	5848K12	0000	0000
				1/4"	1/4"	2.7	300	N38SH	Through Thickness	Uncoated	5848K11	0000	0000
				3/8"	3/8"	4	300	N38SH	Through Thickness	Nickel Plated	5848K16	0000	0000
				3/8"	3/8"	4	300	N38SH	Through Thickness	Uncoated	5848K15	0000	0000
				5/8"	5/8"	6	300	N38SH	Through Thickness	Nickel Plated	5848K26	00000	0000
				5/8"	5/8"	6	300	N38SH	Through Thickness	Uncoated	5848K25	00000	0000
				3/4"	3/4"	8	300	N38SH	Through Thickness	Nickel Plated	5848K62	00000	00000
				3/4"	3/4"	8	300	N38SH	Through Thickness	Uncoated	5848K61	00000	0000


				0.21" Thick



						1/2"	1/2"	7	300	N38SH	Through Thickness	Nickel Plated	5848K52	0000	0000


						1/2"	1/2"	7	300	N38SH	Through Thickness	Uncoated	5848K32	0000	0000


						1/4" Thick



								1/4"	1/4"	4.4	175	N45	Through Thickness	Nickel Plated	5848K91	0000	0000


								1/4"	3/4"	9	300	N38SH	Through Thickness	Nickel Plated	5848K84	00000	00000
1/4"								3/4"	9	300	N38SH	Through Thickness	Uncoated	5848K83	0000	0000
1/4"	1"							10	300	N38SH	Through Thickness	Nickel Plated	5848K72	00000	0000
1/4"	1"							10	300	N38SH	Through Thickness	Uncoated	5848K71	0000	0000
1/4"	2"							15	300	N38SH	Through Thickness	Nickel Plated	5848K76	00000	00000
1/4"	2"							15	300	N38SH	Through Thickness	Uncoated	5848K75	00000	00000
1/2"	1/2"							10	300	N38SH	Through Thickness	Nickel Plated	5848K22	00000	00000
1/2"	1/2"							10	300	N38SH	Through Thickness	Uncoated	5848K21	0000	0000


0.32" Thick



								3/4"	3/4"	16	300	N38SH	Through Thickness	Nickel Plated	5848K53	00000	00000


								3/4"	3/4"	16	300	N38SH	Through Thickness	Uncoated	5848K33	00000	00000


								3/8" Thick



										7/8"	1 7/8"	69	175	N52	Through Thickness	Nickel Plated	5848K42	00000	00000


										1"	1"	23	300	N38SH	Through Thickness	Nickel Plated	58585K31	00000	00000
										1"	1"	23	300	N38SH	Through Thickness	Uncoated	58585K61	00000	00000


										1/2" Thick



										1/2"	1/2"	20	175	N45	Through Thickness	Nickel Plated	5848K92	00000	00000


										1"	2"	96	175	N52	Through Thickness	Nickel Plated	5848K43	00000	00000
										2"	2"	65	300	N38SH	Through Thickness	Nickel Plated	5848K54	000000	00000
										2"	2"	65	300	N38SH	Through Thickness	Uncoated	5848K34	000000	00000
										2"	3"	171	175	N52	Through Thickness	Nickel Plated	5848K44	000000	000000


										3/4" Thick



												1"	2"	132	175	N52	Through Thickness	Nickel Plated	5848K45	00000	00000


				1" Thick



												1/2"	2"	94	175	N52	Through Thickness	Nickel Plated	5848K46	00000	00000


												1"	1"	77	175	N45	Through Thickness	Nickel Plated	5848K93	00000	00000
												2"	2"	75	300	N38SH	Through Thickness	Nickel Plated	58585K41	000000	000000
						2"						2"	75	300	N38SH	Through Thickness	Uncoated	58585K71	000000	000000

Magnets With Adhesive Back


	Magnetized Through Thickness

Adhesive on

North Pole

Adhesive on

South Pole

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

											North Pole			South Pole
							Adhesive					Each			Each
	Wd.	Lg.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Direction of Magnetization	Material	Mfr.	Mfr. Model	Finish		1-49	50-Up		1-49	50-Up
0.055" Thick



		3/8"	1/2"	3.1	175	N52	Through Thickness	Acrylic Plastic	—	—	Nickel Plated	7048T68	00000	00000	———	0	0


		1/2"	3/4"	4.7	175	N52	Through Thickness	Acrylic Plastic	—	—	Nickel Plated	7048T75	0000	0000	7048T74	00000	00000
		1/2"	1"	4.1	170	N45	Through Thickness	—	3M	Very High Bond	Nickel Plated	7048T12	0000	0000	7048T11	0000	0000
		3/4"	1"	6	175	N52	Through Thickness	Acrylic Plastic	—	—	Nickel Plated	7048T7	00000	0000	———	0	0


		5/64" Thick



				5/32"	15/32"	1.7	170	N35	Through Thickness	Acrylic Plastic	—	—	Nickel Plated	7048T22	0000	0000	7048T23	0000	0000


				0.1" Thick



						1/8"	1/4"	1.6	170	N35	Through Thickness	Acrylic Plastic	—	—	Nickel Plated	7048T31	0000	0000	7048T32	0000	0000


						1/4"	1/4"	2.2	170	N35	Through Thickness	Acrylic Plastic	—	—	Nickel Plated	7048T24	0000	0000	7048T25	0000	0000
						3/8"	1/2"	5	175	N52	Through Thickness	Acrylic Plastic	—	—	Nickel Plated	7048T71	0000	0000	———	0	0
						1/2"	1/2"	4	170	N35	Through Thickness	Acrylic Plastic	—	—	Nickel Plated	7048T26	00000	0000	7048T27	00000	0000


						0.118" Thick



								5/16"	19/32"	7	175	N52	Through Thickness	Acrylic Plastic	—	—	Nickel Plated	7048T72	0000	0000	———	0	0


								1/8" Thick



										1/2"	1"	12	175	N52	Through Thickness	Acrylic Plastic	—	—	Nickel Plated	7048T73	0000	0000	———	0	0


										3/16" Thick



												3/16"	3/8"	4	170	N35	Through Thickness	Acrylic Plastic	—	—	Nickel Plated	7048T33	0000	0000	7048T34	0000	0000


												3/4"	3/4"	12	170	N35	Through Thickness	Acrylic Plastic	—	—	Nickel Plated	7048T28	00000	00000	7048T29	00000	00000

Magnets With Unthreaded Hole


	Magnetized Through Thickness	Magnetized Through Length

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

Magnetized Through Length—Magnetized end to end, these magnets channel magnetic energy on the longest axis. This orientation creates deep field penetration and directional pull.

											Each
	Wd.	Hole Dia.	Lg.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Direction of Magnetization	Mounting Hole Style	Finish		1-49	50-Up
1/8" Thick



		1/2"	0.149"	1/2"	8	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K233	00000	00000


		1/2"	0.17"	3/4"	7.4	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K935	0000	0000
		1/2"	0.17"	1"	9.2	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K937	0000	0000
		1/2"	0.202"	2"	13	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K248	00000	00000
		1/2"	0.203"	1"	10	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K245	0000	0000
		3/4"	0.205"	3/4"	12	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K234	0000	0000
		1"	0.275"	1"	16	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K235	00000	00000


		3/16" Thick



				1/2"	0.135"	1/2"	9	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K236	0000	0000


				3/4"	0.167"	3/4"	15	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K237	00000	0000
				1"	0.2"	1"	20	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K238	00000	00000


				1/4" Thick



						1/4"	0.06"	1/4"	4.4	175	N45	Through Thickness	Straight	Nickel Plated	3360K824	0000	0000


						1/4"	0.06"	1/4"	4.4	175	N45	Through Length	Straight	Nickel Plated	3360K821	0000	0000
						1/2"	0.166"	1"	19	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K246	00000	00000
						1/2"	0.167"	1/2"	10	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K239	0000	0000
						1/2"	0.168"	2"	30	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K249	00000	00000
						1/2"	0.17"	3/4"	14	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K936	0000	0000
						1/2"	0.17"	1 1/2"	24	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K938	00000	00000
						1/2"	0.17"	2"	28	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K939	00000	00000
						3/4"	0.168"	3/4"	21	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K241	00000	00000
						1"	0.189"	1"	40	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K242	00000	00000
						1"	0.194"	2"	34.3	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K941	00000	00000


						1/2" Thick



								1/2"	0.16"	1/2"	15	175	N45	Through Thickness	Counterbored	Nickel Plated	5862K221	00000	00000


								1/2"	0.163"	1"	29	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K247	00000	00000
								1/2"	0.166"	2"	52	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K251	00000	00000
								1/2"	3/16"	1/2"	20	175	N45	Through Thickness	Straight	Nickel Plated	3360K825	00000	00000
								1/2"	3/16"	1/2"	20	175	N45	Through Length	Straight	Nickel Plated	3360K822	00000	0000
								3/4"	0.166"	3/4"	25	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K243	00000	00000
								1"	0.194"	1"	53	175	N45	Through Thickness	Counterbored	Nickel Plated	5862K222	00000	00000
								1"	0.194"	2"	74	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K942	00000	00000
								1"	0.214"	1"	53	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K244	00000	00000


								3/4" Thick



3/4"	3/16"									3/4"	43	175	N45	Through Thickness	Straight	Nickel Plated	3360K826	00000	00000


3/4"	3/16"									3/4"	43	175	N45	Through Length	Straight	Nickel Plated	3360K823	00000	00000

Encased Neodymium Disc Magnets


1	2	3	4	5

Powerful performance with built-in durability. A protective case shields these magnets from the elements as well as cracks and chips when handling, mounting, or sweeping them. With the highest strength-to-size ratio of any magnet, these deliver powerful pull force even in tight spaces.

Magnets With Unthreaded Hole


1	2

3

Zinc-Plated Steel Case—Withstands occasional exposure to moisture.

Chrome-Plated Steel Case—The bright, shiny finish resists salt water and chemicals better than other finishes and is less likely to wear off.

Nickel-Plated Steel Case—Offers similar corrosion resistance to chrome plating to withstand salt water and chemicals. However, nickel is more likely to wear off over time.

Aluminum Case—Lightweight and corrosion-resistant, this case is best for applications with weight limitations. However, the magnetic strength is lower than steel.

											Each
	Style	Thk.	OD	Hole Dia.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Mounting Hole Style	For Screw Size		1-49	50-Up
Zinc-Plated Steel Case



		1	11/64"	5/8"	0.138"	16.5	175	N35	Countersunk	M3	5679K97	00000	00000


		1	3/16"	5/8"	0.136"	11	170	N42	Countersunk	No. 5	5679K12	0000	0000
		1	15/64"	0.79"	0.177"	23	175	N35	Countersunk	M4	5679K98	0000	0000
		1	1/4"	3/4"	11/64"	15	170	N42	Countersunk	No. 8	5679K14	0000	0000
		1	1/4"	1"	0.194"	29	170	N42	Countersunk	No. 8	5679K16	0000	0000
		1	9/32"	63/64"	0.177"	35	175	N35	Countersunk	M4	5679K99	0000	0000
		1	9/32"	1 17/64"	0.217"	68	175	N35	Countersunk	M5	5679K115	0000	0000
		1	5/16"	1 9/16"	0.217"	110	175	N35	Countersunk	M5	5679K116	00000	00000
		1	3/8"	1 1/4"	0.221"	45	170	N42	Countersunk	No. 10	5679K18	0000	0000
		1	3/8"	1 1/2"	0.221"	70	170	N42	Countersunk	No. 10	5679K26	0000	0000
		1	3/8"	1 3/4"	9/32"	95	170	N42	Countersunk	1/4"	5679K22	00000	0000


		1	1/2"	2"	9/32"	130	170	N42	Countersunk	1/4"	5679K23	00000	00000
		1	1/2"	4 29/32"	1/2"	270	170	N35	Straight	1/2"	7061T17	000000	00000
		1	5/8"	2 1/2"	13/32"	200	170	N42	Countersunk	3/8"	5679K24	00000	00000
		1	3/4"	3"	13/32"	280	170	N42	Countersunk	3/8"	5679K25	00000	00000
		2	5/16"	2 1/32"	3/16"	95	170	N35	Straight	No. 8	5752K21	00000	00000
		2	3/8"	2 5/8"	9/32"	200	170	N35	Straight	1/4"	5752K25	00000	00000


		Chrome-Plated Steel Case



				1	3/16"	1 13/64"	1/8"	40	170	N35	Straight	No. 4	7061T11	00000	0000


				1	17/64"	25/32"	0.176"	13	170	N35	Straight	No. 5	7061T667	0000	0000
				1	17/64"	1 7/16"	0.192"	65	170	N35	Straight	No. 8	7061T12	00000	00000
				1	19/64"	2 3/64"	0.193"	90	170	N35	Straight	No. 8	7061T13	00000	00000
				1	5/16"	63/64"	0.216"	30	170	N35	Straight	No. 8	7061T675	0000	0000
				1	5/16"	1 17/64"	0.217"	55	170	N35	Countersunk	No. 3	7061T682	0000	0000
				1	11/32"	2 3/8"	17/64"	110	170	N35	Straight	1/4"	7061T14	00000	00000
				1	3/8"	2 5/8"	9/32"	140	170	N35	Straight	1/4"	7061T15	00000	00000
				1	27/64"	3 13/64"	0.28"	195	170	N35	Straight	1/4"	7061T725	00000	00000
				1	1/2"	4 29/32"	1/2"	300	170	N35	Straight	3/8"	7061T951	00000	00000
				2	13/64"	1 1/4"	0.138"	40	175	N35	Straight	No. 5	5679K44	00000	0000


				2	9/32"	1 29/64"	0.197"	60	175	N42	Straight	No. 8	5679K45	00000	00000
				2	21/64"	2 3/64"	0.197"	110	175	N35	Straight	No. 8	5679K46	00000	00000
				2	13/32"	2 21/32"	0.275"	220	175	N40	Straight	1/4"	5679K47	00000	00000


				Nickel-Plated Steel Case



						1	0.275"	0.79"	0.177"	23	180	N52	Straight	No. 8	5679K365	0000	0000


						1	9/32"	1 13/32"	0.188"	51	180	N52	Straight	No. 10	5679K528	00000	00000


						Aluminum Case



3								1/2"	2"	9/32"	90	170	N35	Countersunk	1/4"	5867K91	00000	00000


3	1"							2"	9/32"	120	170	N35	Countersunk	1/4"	5867K92	00000	00000
3	1"							2 1/2"	9/32"	180	170	N35	Countersunk	1/4"	5867K93	00000	00000
3	1"							3"	9/32"	290	170	N35	Countersunk	1/4"	5867K94	00000	00000

Press Fit Magnets

Press magnets into drilled holes for flush mounting. Friction holds them in place, so there's no need for screws or adhesives.

Zinc-Plated Steel Case—Withstands occasional exposure to moisture.

Plastic Case—Lightweight, nonconductive, and naturally rust resistant.

	Thk.	OD	Max. Pull, lbf	Exposed Pole	Max. Temp., ° F	Magnet Grade	Pkg. Qty.		Pkg.
Zinc-Plated Steel Case



	4	0.337"	15/32"	4.4	North Pole	180	N42	1	3506K36	00000


	4	0.337"	15/32"	4.4	South Pole	180	N42	1	3506K37	0000
	5	1/4"	3/8"	2	—	170	N35	1	3506K21	0000


	Plastic Case



			5	0.413"	19/32"	4.4	—	180	N42	2	3506K35	0000

Encased Ceramic Disc Magnets


1	2	3	4

Our most economical magnets with built-in durability. A protective case shields them from cracks and chips caused by bumps and drops. Ceramic magnets deliver a cost-effective balance of corrosion and temperature resistance. However, they are not as strong as rare earth magnets.

Warning: Maximum pull ratings are based on direct contact with rust-free, unpainted iron surfaces. Variations in material condition will significantly reduce holding strength. Do not use for lifting over people.

Standard Magnets

Aluminum Case—Lightweight and corrosion-resistant, this case is best for applications with weight limitations. However, the magnetic strength is lower than steel.

	Thk.	OD	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade		Each
Aluminum Case



	1	1/2"	1/4"	0.4	175	C8	5703K47	00000


	1	1/2"	1/2"	2.2	175	C8	5703K32	0000
	1	1"	1/2"	3	175	C8	5703K18	00000
	1	1"	5/8"	5	175	C8	5703K41	00000
	1	1"	5/8"	7	175	C8	5735K12	00000
	1	1"	3/4"	15	175	C8	5735K62	00000
	1	1 1/4"	3/4"	10	175	C8	5703K42	00000
	1	1 1/4"	1 1/4"	50	175	C8	5735K65	00000

Magnets With Unthreaded Hole


2	3

Zinc-Plated Steel Case—Withstands occasional exposure to moisture.

Chrome-Plated Steel Case—The bright, shiny finish resists salt water and chemicals better than other finishes and is less likely to wear off.

Stainless Steel Case—Our most corrosion-resistant case withstands exposure to chemicals. However, it's not as strong as steel.

Anodized Aluminum Case—The anodized finish adds an extra layer of corrosion resistance.

	Thk.	OD	Hole Dia.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Mounting Hole Style	For Screw Size		Each
Zinc-Plated Steel Case



	2	3/16"	1 15/64"	5/32"	15	245	C8	Straight	No. 6	5685K31	00000


	2	15/64"	0.79"	0.165"	5	245	C5	Countersunk	No. 6	5685K51	0000
	2	9/32"	1 13/32"	3/16"	25	245	C8	Straight	No. 8	5685K26	0000
	2	5/16"	1 9/16"	0.217"	19	245	C5	Countersunk	No. 12	5685K52	0000
	2	5/16"	2 1/32"	3/16"	42	245	C8	Straight	No. 8	5685K32	0000
	2	3/8"	2 5/8"	9/32"	80	245	C8	Straight	1/4"	5685K28	0000
	2	3/8"	2 7/8"	9/32"	112	245	C8	Straight	1/4"	5685K33	0000
	2	7/16"	3 3/16"	9/32"	140	245	C8	Straight	1/4"	5685K39	0000
	2	1/2"	4 29/32"	1/2"	170	245	C8	Straight	1/2"	5685K35	00000
	2	33/64"	3 7/8"	3/8"	147	245	C8	Straight	5/16"	5685K83	00000
	2	5 mm	16 mm	4 mm	3	245	—	Countersunk	M3	5685K61	0000


	2	6 mm	20 mm	4 mm	6	245	—	Countersunk	M3	5685K62	0000
	2	7 mm	25 mm	6 mm	8	245	—	Countersunk	M5	5685K63	0000
	2	7 mm	32 mm	6 mm	16	245	—	Countersunk	M5	5685K64	0000
	2	8 mm	40 mm	6 mm	20	245	—	Countersunk	M5	5685K65	0000
	2	10 mm	50 mm	9 mm	40	245	—	Straight	M8	5685K66	0000
	2	14 mm	63 mm	7 mm	65	245	—	Straight	M6	5685K67	00000
	2	18 mm	80 mm	7 mm	120	245	—	Straight	M6	5685K68	00000
	2	22 mm	100 mm	11 mm	150	245	—	Straight	M10	5685K69	00000
	3	3/16"	1 15/64"	0.138"	15	245	C8	Straight	No. 6	5819K31	0000
	3	5/16"	2 1/32"	0.19"	42	245	C8	Straight	No. 10	5819K33	0000


	3	3/8"	2 5/8"	1/4"	80	245	C8	Straight	1/4"	5819K35	00000
	3	7/16"	3 3/16"	1/4"	140	245	C8	Straight	1/4"	5819K37	00000
	3	1/2"	4 29/32"	1/2"	170	245	C8	Straight	3/8"	5819K43	00000


	Chrome-Plated Steel Case



			2	11/64"	1 13/64"	1/8"	4	170	C5	Straight	No. 5	5685K41	0000


			2	19/64"	1 45/64"	0.153"	12	170	C5	Straight	No. 6	5685K42	0000
			2	5/16"	2 3/16"	13/64"	30	170	C5	Straight	No. 10	5685K45	0000
			2	11/32"	2 3/8"	13/64"	45	170	C5	Straight	No. 10	5685K43	0000
			2	3/8"	2 51/64"	1/4"	75	170	C5	Straight	1/4"	5685K46	0000
			2	33/64"	3 55/64"	3/8"	110	170	C5	Straight	3/8"	5685K44	00000
			3	19/64"	2 1/32"	3/16"	35	170	C5	Straight	No. 8	5685K82	0000
			3	33/64"	3 3/8"	3/8"	120	170	C5	Straight	5/16"	5685K81	00000


			Stainless Steel Case



					2	6 mm	20 mm	4 mm	4	425	—	Countersunk	M3	5685K71	0000


					2	7 mm	25 mm	6 mm	6	425	—	Countersunk	M5	5685K72	0000
					2	7 mm	32 mm	6 mm	13	425	—	Countersunk	M5	5685K73	0000
					2	8 mm	40 mm	6 mm	16	425	—	Countersunk	M5	5685K74	0000
					2	10 mm	50 mm	9 mm	32	425	—	Straight	M8	5685K75	00000
					2	14 mm	63 mm	7 mm	50	425	—	Straight	M6	5685K76	00000


Anodized Aluminum Case



					1	1/2"	3"	1/4"	24	180	C8	Straight	1/4"	5782K71	00000

Magnets With Mounting Plate

Add a magnetic surface anywhere. Install the mounting plate, then screw on the magnet.

Chrome-Plated Steel Case—The bright, shiny finish resists salt water and chemicals better than other finishes and is less likely to wear off.

									Mounting
	Style	Thk.	OD	Hole Dia.	Max. Pull, lbf	Max. Temp.	Mounting Hole Style	Thread Size	Plate Material	Hole Dia.	Plate Thk.		Each
Chrome-Plated Steel Case



		4	0.73"	2 5/64"	0.275"	4.5	Not Rated	Straight	1/4"-20	Plastic	0.085"	0.35"	1046A5	000000

Threaded Encased Ceramic Disc Magnets


1	2	3

Thread our most economical magnets into position, then readjust if needed. With built-in durability, a protective case shields these from cracks and chips caused by bumps and drops. Ceramic magnets deliver a cost-effective balance of corrosion and temperature resistance. However, they are not as strong as rare earth magnets.

Magnets With Threaded Hole


1	2

Internally threaded for secure mounting with screws or bolts.

Zinc-Plated Steel Case—Withstands occasional exposure to moisture.

Aluminum Case—Lightweight and corrosion-resistant, this case is best for applications with weight limitations. However, the magnetic strength is lower than steel.

										Thread
	Style	Thk.	OD	Post Lg., mm	Overall Lg., mm	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Mounting Hole Style	Size	Dp.		Each
Zinc-Plated Steel Case



		1	4.5 mm	10 mm	7	11.5	0.5	245	C5	Straight	M3 × 0.5 mm	7 mm	5819K55	00000


		1	4.5 mm	13 mm	7	11.5	2	245	C5	Straight	M3 × 0.5 mm	7 mm	5819K56	0000
		1	4.5 mm	16 mm	7	11.5	3.5	245	C5	Straight	M3 × 0.5 mm	7 mm	5819K57	0000
		1	6.1 mm	20 mm	6.9	13	6	175	C8	Straight	M3 × 0.5 mm	6.9 mm	5819K51	0000
		1	7 mm	25 mm	8	15	8.5	245	C5	Straight	M4 × 0.7 mm	8 mm	5819K58	0000
		1	7.1 mm	32 mm	7.9	15	18	175	C8	Straight	M4 × 0.7 mm	7.9 mm	5819K52	0000
		1	7.7 mm	36 mm	8.3	16	22	245	C5	Straight	M4 × 0.7 mm	8.3 mm	5819K59	0000
		1	7.9 mm	40 mm	9.1	17	28	175	C8	Straight	M4 × 0.7 mm	8.6 mm	5819K53	0000
		1	9 mm	47 mm	8	17	39	245	C5	Straight	M4 × 0.7 mm	8 mm	5819K61	00000
		1	10 mm	50 mm	12	22	48	245	C5	Straight	M6 × 1 mm	12 mm	5819K62	00000
		1	10.4 mm	57 mm	8.6	19	60	175	C8	Straight	M4 × 0.7 mm	8.1 mm	5819K54	0000


		1	14 mm	63 mm	16	30	77	245	C5	Straight	M8 × 1.25 mm	16 mm	5819K63	00000
		1	18 mm	80 mm	16	34	132	245	C5	Straight	M10 × 1.5 mm	16 mm	5819K64	00000
		1	20 mm	90 mm	20	40	154	245	C5	Straight	M10 × 1.5 mm	20 mm	5819K65	00000
		1	22 mm	100 mm	20	42	198	245	C5	Straight	M12 × 1.75 mm	20 mm	5819K66	00000
		1	26 mm	125 mm	24	50	286	245	C5	Straight	M14 × 2 mm	24 mm	5819K67	00000


		Aluminum Case



				2	1/2"	5/8"	—	—	3	175	C8	Straight	8-32	3/16"	5703K54	0000


				2	1/2"	3/4"	—	—	4	175	C8	Straight	10-32	3/16"	5703K55	0000
				2	1"	5/8"	—	—	8	175	C8	Straight	8-32	3/16"	5703K48	0000
				2	1"	5/8"	—	—	14	175	C8	Straight	8-32	3/16"	5735K71	00000
				2	1"	3/4"	—	—	17	175	C8	Straight	10-32	3/16"	5703K51	0000
				2	1"	3/4"	—	—	23	175	C8	Straight	10-32	3/16"	5735K72	00000
				2	1"	1"	—	—	23	175	C8	Straight	1/4"-20	1/4"	5703K52	00000
				2	1"	1"	—	—	40	175	C8	Straight	1/4"-20	1/4"	5735K73	00000
				2	1 1/4"	1 1/4"	—	—	40	175	C8	Straight	1/4"-20	1/4"	5703K53	00000

Magnets With Threaded Stud

Image of Product. 3. Front orientation. Magnets. Encased, Ferrite Ceramic, Disc, Threaded-Stud Mount, Style 3.

Screw into tapped holes for secure mounting that’s also removable.

Zinc-Plated Steel Case—Withstands occasional exposure to moisture.

Nickel-Plated Steel Case—Offers similar corrosion resistance to chrome plating to withstand salt water and chemicals. However, nickel is more likely to wear off over time.

Powder-Coated Steel Case—The coating creates a corrosion-resistant barrier for outdoor applications.

	Thk.	OD	Stud Lg.	Overall Lg.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Thread Size		Each
Zinc-Plated Steel Case



	3	3/16"	2 1/4"	1"	1 3/16"	5	300	C8	5/16"-18	5819K41	000000


	Nickel-Plated Steel Case



			3	5/16"	63/64"	0.413"	47/64"	8	120	C8	10-24	5819K111	0000


			3	5/16"	1 17/64"	0.413"	47/64"	13	120	C8	1/4"-20	5819K115	0000
			3	5/16"	1 27/64"	0.55"	55/64"	20	120	C8	1/4"-20	5819K119	0000
			3	23/64"	1 21/32"	1/2"	55/64"	25	120	C8	5/16"-18	5819K124	0000
			3	29/64"	1 57/64"	1/2"	61/64"	35	120	C8	5/16"-18	5819K128	0000
			3	1/2"	2"	1/2"	1"	55	120	C8	1/4"-20	5819K133	00000
			3	5/8"	2 1/2"	0.846"	1 15/32"	68	120	C8	3/8"-16	5819K137	00000
			3	49/64"	3"	0.87"	1 5/8"	130	120	C8	3/8"-16	5819K142	00000
			3	8 mm	25 mm	8 mm	16 mm	8	120	C8	M5 × 0.8 mm	5819K113	0000
			3	8 mm	32 mm	10 mm	18 mm	13	120	C8	M6 × 1 mm	5819K117	0000
			3	8 mm	36 mm	10 mm	18 mm	20	120	C8	M6 × 1 mm	5819K122	0000


			3	9 mm	42 mm	10 mm	19 mm	25	120	C8	M6 × 1 mm	5819K126	0000
			3	11.5 mm	48 mm	10 mm	21.5 mm	35	120	C8	M8 × 1.25 mm	5819K131	0000
			3	13 mm	50.8 mm	10 mm	23 mm	55	120	C8	M8 × 1.25 mm	5819K135	00000
			3	16 mm	63.5 mm	11.5 mm	27.5 mm	68	120	C8	M8 × 1.25 mm	5819K139	00000
			Encased Ceramic Magnet, Threaded Stud, Nickel-Plated Steel Case, 16mm Thick, 63.5mm OD Product Detail QuantityEachIn stock Select a compatible file type: Parasolid
			3	19 mm	76.2 mm	15 mm	34 mm	130	120	C8	M10 × 1.5 mm	5819K144	00000


			Powder-Coated Steel Case



					3	5/16"	63/64"	0.413"	47/64"	4	120	C8	10-24	5819K112	0000


					3	5/16"	1 17/64"	0.413"	47/64"	9	120	C8	1/4"-20	5819K116	0000
					3	23/64"	1 21/32"	1/2"	55/64"	21	120	C8	5/16"-18	5819K125	0000
					3	29/64"	1 57/64"	1/2"	61/64"	29	120	C8	5/16"-18	5819K129	0000
					3	1/2"	2"	1/2"	1"	48	120	C8	1/4"-20	5819K134	00000
					3	5/8"	2 1/2"	0.846"	1 15/32"	60	120	C8	3/8"-16	5819K138	00000
					3	49/64"	3"	0.87"	1 5/8"	110	120	C8	3/8"-16	5819K143	00000
					3	8 mm	25 mm	8 mm	16 mm	4	120	C8	M5 × 0.8 mm	5819K114	0000
					3	8 mm	32 mm	10 mm	18 mm	9	120	C8	M6 × 1 mm	5819K118	0000
					3	9 mm	42 mm	10 mm	19 mm	21	120	C8	M6 × 1 mm	5819K127	0000
					3	11.5 mm	48 mm	10 mm	21.5 mm	29	120	C8	M8 × 1.25 mm	5819K132	0000


					3	13 mm	50.8 mm	10 mm	23 mm	48	120	C8	M8 × 1.25 mm	5819K136	00000
					3	16 mm	63.5 mm	11.5 mm	27.5 mm	60	120	C8	M8 × 1.25 mm	5819K141	00000
					3	19 mm	76.2 mm	15 mm	34 mm	110	120	C8	M10 × 1.5 mm	5819K145	00000

Nonmarring Threaded Encased Neodymium Disc Magnets

Thread magnets into position and readjust them without marking surfaces. The rubber-coated case protects metal housings and control panels from scratches and adds friction for a tight grip. It also shields the magnets from cracks and chips caused by drops and bumps. With the highest strength-to-size ratio of any magnet, these deliver powerful pull force even in tight spaces.

Warning: Maximum pull ratings are based on direct contact with rust-free, unpainted iron plate. Variations in material condition will significantly reduce these ratings. Do not use for lifting over people.

Magnets With Threaded Hole


Disc	Magnetized Through Thickness

Internally threaded for secure mounting with screws or bolts.

Zinc-Plated Steel Case—Withstands occasional exposure to moisture.

Nickel-Plated Steel Case—Offers similar corrosion resistance to chrome plating to withstand salt water and chemicals. However, nickel is more likely to wear off over time.

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

								Thread				Each
	Thk.	OD	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Direction of Magnetization	Cover Material	Size	Dp.	Color		1-49	50-Up
Zinc-Plated Steel Case



		15/64"	1 7/32"	20	170	N48	Through Thickness	Rubber	M5 × 0.8 mm	0.157"	Black	7132T31	000000	000000


		21/64"	1 9/64"	24	170	N48	Through Thickness	Rubber	M5 × 0.8 mm	0.315"	Black	7132T34	00000	00000
		21/64"	1 27/64"	46	170	N48	Through Thickness	Rubber	M6 × 1 mm	0.315"	Black	7132T33	00000	00000
		3/8"	1 49/64"	68	170	N48	Through Thickness	Rubber	M6 × 1 mm	0.354"	Black	7132T32	00000	00000


		Nickel-Plated Steel Case



				15/64"	7/8"	11	170	N42	Through Thickness	Rubber	M4 × 0.7 mm	0.197"	Black	7132T27	00000	00000


				15/64"	1 11/16"	20	170	N35	Through Thickness	Rubber	M4 × 0.7 mm	0.197"	Black	7132T21	00000	00000
				5/16"	2 9/16"	32	170	N35	Through Thickness	Rubber	M5 × 0.8 mm	0.236"	Black	7132T22	00000	00000
				21/64"	3 1/2"	100	170	N35	Through Thickness	Rubber	M6 × 1 mm	0.276"	Black	7132T23	00000	00000

Magnets With Threaded Stud

Image of Product. Front orientation. Magnets. Disc, Encased, Neodymium, Nonmarring, Threaded-Stud Mount.

Screw into tapped holes for secure mounting that’s also removable.

Zinc-Plated Steel Case—Withstands occasional exposure to moisture.

Nickel-Plated Steel Case—Offers similar corrosion resistance to chrome plating to withstand salt water and chemicals. However, nickel is more likely to wear off over time.

											Each
	Thk.	OD	Stud Lg.	Overall Ht.	Max. Pull, lbf	Max. Temp., ° F	Cover Material	Thread Size	Color		1-49	50-Up
Zinc-Plated Steel Case



		6 mm	31 mm	12 mm	18 mm	20	170	Rubber	M5 × 0.8 mm	Black	7132T52	000000	000000


		10.5 mm	50 mm	20 mm	31 mm	101	170	Rubber	M6 × 1 mm	Black	7132T53	00000	00000
		11.5 mm	64 mm	20 mm	32 mm	202	170	Rubber	M8 × 1.25 mm	Black	7132T54	000000	00000


		Nickel-Plated Steel Case



				15/64"	1 11/16"	1"	1.24"	20	170	Rubber	1/4"-20	Black	7132T24	00000	00000


				5/16"	2 9/16"	1"	1 5/16"	32	170	Rubber	1/4"-20	Black	7132T25	00000	00000
				21/64"	3 1/2"	1"	1 21/64"	100	170	Rubber	1/4"-20	Black	7132T26	00000	00000
				6 mm	22 mm	7 mm	13 mm	11	170	Rubber	M4 × 0.7 mm	Black	7132T213	00000	00000

Multipole Neodymium Disc Magnets

Grip thin metal surfaces where standard magnets fail to hold. These magnets have multiple small poles that generate a shallow, concentrated magnetic field only near the surface. This makes them less likely to accidentally stick to nearby objects. They're often used to mount sensors on thin-walled enclosures or control panels. With the highest strength-to-size ratio of any magnet, these deliver powerful pull force even in tight spaces. Also known as Polymagnets®.

Standard Magnets


	Magnetized Through Thickness

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

								Each
	OD	Max. Pull, lbf	Sets of Poles	Max. Temp., ° F	Magnet Grade	Direction of Magnetization		1-49	50-Up
1/16" Thick



		1/2"	4.9	5	180	N52	Through Thickness	2494N37	00000	00000


		3/4"	15	14	180	N42	Through Thickness	2494N54	0000	0000
		1"	17	13	180	N42	Through Thickness	2494N5	0000	0000


		1/8" Thick



				1/2"	8	8	180	N35	Through Thickness	2494N9	0000	0000


				1/2"	9	8	180	N42	Through Thickness	2494N1	0000	0000
				3/4"	18	12	180	N42	Through Thickness	2494N4	0000	0000
				1"	37	22	180	N42	Through Thickness	2494N56	0000	0000
				1 1/2"	77	37	180	N42	Through Thickness	2494N8	00000	00000


				3/16" Thick



						1/2"	9	8	180	N35	Through Thickness	2494N11	0000	0000


						1/2"	11	8	180	N42	Through Thickness	2494N2	0000	0000
						1"	38	13	180	N42	Through Thickness	2494N7	00000	0000

Magnets With Adhesive Back


	Magnetized Through Thickness

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

							Adhesive			Each
	OD	Max. Pull, lbf	Sets of Poles	Max. Temp., ° F	Magnet Grade	Direction of Magnetization	Mfr.	Mfr. Model		1-49	50-Up
1/16" Thick



		1/2"	4.9	5	180	N52	Through Thickness	3M	Very High Bond	2494N35	00000	00000


		3/4"	15	13	180	N42	Through Thickness	3M	Very High Bond	2494N36	0000	0000
		1"	17	13	180	N42	Through Thickness	3M	Very High Bond	2494N25	0000	0000


		1/8" Thick



				1"	37	13	180	N42	Through Thickness	3M	Very High Bond	2494N26	00000	0000


				1 1/2"	77	37	180	N42	Through Thickness	3M	Very High Bond	2494N28	00000	00000


				3/16" Thick



						1"	38	13	180	N42	Through Thickness	3M	Very High Bond	2494N27	00000	00000

Magnets With Adhesive Back and Unthreaded Hole


	Magnetized Through Thickness

Stick in place for fast, tool-free mounting where drilling isn’t practical. The adhesive holds tight without scratching surfaces. For added holding power, mount with pins, bolts, or rivets. There's no need for threading.

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

								Adhesive				Each
	OD	Hole Dia.	Max. Pull, lbf	Sets of Poles	Max. Temp., ° F	Magnet Grade	Direction of Magnetization	Mfr.	Mfr. Model	Mounting Hole Style		1-49	50-Up
1/8" Thick



		1"	0.19"	33	10	180	N42	Through Thickness	3M	Very High Bond	Straight	2494N45	000000	00000


		1 1/2"	1/8"	67	36	180	N42	Through Thickness	3M	Very High Bond	Straight	2494N46	00000	00000

Magnets With Unthreaded Hole


	Magnetized Through Thickness

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

											Each
	OD	Hole Dia.	Max. Pull, lbf	Sets of Poles	Max. Temp., ° F	Magnet Grade	Direction of Magnetization	Mounting Hole Style	For Screw Size		1-49	50-Up
1/8" Thick



		3/4"	1/8"	16	12	180	N42	Through Thickness	Straight	—	2494N12	00000	00000


		3/4"	0.186"	11	6	180	N42	Through Thickness	Countersunk	No. 8	2494N13	0000	0000
		7/8"	0.186"	14	6	180	N42	Through Thickness	Countersunk	No. 8	2494N41	0000	0000
		1"	0.186"	17	12	180	N42	Through Thickness	Countersunk	No. 8	2494N14	00000	00000
		1"	0.19"	33	21	180	N42	Through Thickness	Straight	—	2494N55	0000	0000
		1 1/4"	0.186"	42	6	180	N42	Through Thickness	Countersunk	No. 8	2494N42	00000	00000
		1 1/2"	1/8"	67	37	180	N42	Through Thickness	Straight	—	2494N16	00000	00000


		3/16" Thick



				2"	7/8"	119	86	180	N42	Through Thickness	Straight	—	2494N17	00000	00000

Easy On/Off Neodymium Magnets

Turn magnetic force on or off with a simple twist. These magnets grip firmly and release quickly, making them best for fixtures, positioning tasks, and quick-change setups. With the highest strength-to-size ratio of any magnet, these deliver a powerful and even pull force across surfaces.

Standard Magnets

Nickel-Plated Steel Case—Offers similar corrosion resistance to chrome plating to withstand salt water and chemicals. However, nickel is more likely to wear off over time.

	Lg.	Ht.	Overall Ht.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade		Each
Nickel-Plated Steel Case



	7/8"	1 1/8"	1 1/4"	2 1/8"	95	180	N45	9649T11	000000


	1 1/4"	1 5/8"	1 1/4"	2 1/8"	150	180	N45	9649T12	00000

Magnets With Unthreaded Hole


Knob Actuator	Handle Actuator

Zinc-Plated Steel Case—Withstands occasional exposure to moisture.

Nickel-Plated Steel Case—Offers similar corrosion resistance to chrome plating to withstand salt water and chemicals. However, nickel is more likely to wear off over time.

Knob Actuator—The knob has a wide grip for extra leverage.

									Mounting					Knob Actuator		Handle Actuator
	Wd.	Lg.	Ht.	Overall Ht.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Flange Material	Hole Dia.	Flange Lg.	Flange Wd.	Flange Ht.	No. of Mounting Holes		Each		Each
Zinc-Plated Steel Case



		5/8"	1"	1 1/8"	1 7/8"	55	175	N35	Aluminum	3/16"	1 9/16"	1"	3/8"	2	9649T122	000000	———	0


		1 5/8"	2 1/4"	1 1/2"	3 1/8"	215	175	N35	Aluminum	1/4"	3 7/16"	2 3/8"	3/4"	2	9649T121	000000	———	0


		Nickel-Plated Steel Case



				7/8"	1 1/8"	1 1/4"	2 1/4"	95	180	N45	Aluminum	3/16"	2 1/4"	7/8"	1/2"	2	———	0	9649T13	000000


				1 1/4"	1 5/8"	1 1/4"	2 1/4"	150	180	N45	Aluminum	3/16"	2 5/8"	1 1/4"	1/2"	2	———	0	9649T14	00000

Magnets With Threaded Hole

Image of Product. Front orientation. Magnets. Easy On/Off Neodymium Magnets, Threaded-Hole Mount.

Internally threaded for secure mounting with screws or bolts.

Steel Case—Maximizes holding power by concentrating magnetic force.

								Thread
	Wd.	Lg.	Ht.	Overall Ht.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Size	Dp.	No. of Mounting Holes		Each
Steel Case



		1 1/2"	1 3/4"	1 3/4"	3 1/8"	150	175	N35	8-32	5/16"	12	9649T16	0000000


		2 1/2"	3"	2 3/4"	4 7/8"	450	175	N35	1/4"-20	1/2"	14	9649T17	000000
		4"	4 1/4"	3"	5 1/8"	1,000	175	N35	3/8"-16	5/8"	14	9649T18	000000

Ceramic Disc Magnets

Our most economical magnets cut costs, not reliability. They stay strong in temperatures up to 400° F and resist some corrosion. They’re also nonconductive to prevent short circuits in DC motors, transformers, and speakers. However, they are not as strong as rare earth magnets.

Standard Magnets

Magnetized

Through

Thickness

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

	OD	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Direction of Magnetization		Each
1/8" Thick



		5/16"	0.2	400	C5	Through Thickness	5857K17	00000


		9/16"	0.4	400	C5	Through Thickness	5857K25	0000


		1/4" Thick



				11/32"	0.5	400	C5	Through Thickness	5857K23	0000


				1/2"	0.3	400	C1	Through Thickness	5857K11	0000
				45/64"	1	400	C5	Through Thickness	5857K26	0000
				1 3/64"	0.5	400	C1	Through Thickness	5857K12	0000
				2 13/32"	0.5	400	C1	Through Thickness	5857K14	0000


				9/32" Thick



						1/4"	0.4	400	C5	Through Thickness	5857K16	0000


						3/8" Thick



								5/8"	1.3	400	C5	Through Thickness	5857K18	0000


								3/4"	1.6	400	C8	Through Thickness	5857K27	0000


								13/32" Thick



										3/8"	0.9	400	C5	Through Thickness	5857K24	0000


										1/2" Thick



												3"	8	400	C5	Through Thickness	5857K21	00000


												5/8" Thick



														1"	3	400	C5	Through Thickness	5857K28	0000


														3/4" Thick



2"																8	400	C5	Through Thickness	5857K19	00000


3"	12															400	C5	Through Thickness	5857K22	00000


1" Thick



																7/8"	4	400	C8	Through Thickness	5857K15	0000

Magnets With Unthreaded Hole


	Magnetized Through Thickness

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

	Hole Dia.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Direction of Magnetization	Mounting Hole Style		Each
0.118" Thick



	11/16"	19/64"	0.4	400	C8	Through Thickness	Straight	5856K11	00000


	1/8" Thick



			1/2"	3/16"	0.1	400	C1	Through Thickness	Straight	5856K1	0000


			3/16" Thick



					1 1/4"	3/8"	1	400	C5	Through Thickness	Straight	5856K12	0000


					15/64" Thick



							1 1/8"	3/8"	0.6	400	C1	Through Thickness	Straight	5856K3	0000


							1/4" Thick



									3/4"	17/64"	0.3	400	C1	Through Thickness	Straight	5856K2	0000


									1 3/64"	0.597"	0.7	400	C1	Through Thickness	Straight	5856K4	0000
									1 45/64"	0.705"	0.7	400	C1	Through Thickness	Straight	5856K8	0000


									9/32" Thick



											2 3/8"	1"	3	400	C5	Through Thickness	Straight	5856K14	0000


											19/64" Thick



													2 1/32"	0.705"	1.7	400	C1	Through Thickness	Straight	5856K7	0000


													5/16" Thick



															1 49/64"	0.866"	2.5	400	C5	Through Thickness	Straight	5856K13	0000


															21/64" Thick



																	2 51/64"	1 13/64"	4	400	C5	Through Thickness	Straight	5856K15	0000


13/32" Thick



																	4 35/64"	1 3/4"	9	400	C5	Through Thickness	Straight	5856K17	00000


	27/64" Thick



																	3 3/8"	1.28"	7	400	C5	Through Thickness	Straight	5856K16	00000


			7/16" Thick



																	1 15/64"	0.885"	0.6	400	C1	Through Thickness	Straight	5856K5	0000


																	35/64" Thick



																	5 17/64"	2.21"	17	400	C5	Through Thickness	Straight	5856K18	00000

Encased Ceramic Rectangle Magnets


1	2

3	4

Standard Magnets


1	2	3

Steel Case—Maximizes holding power by concentrating magnetic force.

Aluminum Case—Lightweight and corrosion-resistant, this case is best for applications with weight limitations. However, the magnetic strength is lower than steel.

Plastic Case—Lightweight, nonconductive, and naturally rust resistant.

	Thk.	Wd.	Lg.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade		Each
Steel Case



	1	1/8"	33/64"	1"	2.2	175	C8	57005K91	00000


	1	3/16"	15/32"	1 21/32"	4	175	C8	57005K93	0000
	1	3/16"	33/64"	1"	3	175	C8	57005K92	0000


	Aluminum Case



			2	1 1/4"	1 1/4"	4 1/2"	75	180	C8	5740K14	00000


			2	1 1/4"	1 1/4"	4 1/2"	110	180	C8	5740K21	00000
			2	1 1/4"	1 7/8"	4 1/2"	150	180	C8	5740K24	00000
			2	1 1/4"	2 1/2"	4 1/2"	230	180	C8	5740K33	00000


			Plastic Case



					3	1 1/4"	1"	4 1/2"	45	300	C8	5740K11	00000


					3	1 1/4"	1"	4 1/2"	55	300	C8	5740K13	00000
					3	1 1/4"	1"	4 1/2"	65	300	C8	5740K12	00000

Magnets With Unthreaded Hole

Steel Case—Maximizes holding power by concentrating magnetic force.

Zinc-Plated Steel Case—Withstands occasional exposure to moisture.

Nickel-Plated Steel Case—Offers similar corrosion resistance to chrome plating to withstand salt water and chemicals. However, nickel is more likely to wear off over time.

Cadmium-Plated Steel Case—More rust resistant than zinc-plated steel for use in wet and outdoor environments.

Stainless Steel Case—Our most corrosion-resistant case withstands exposure to chemicals. However, it's not as strong as steel.

	Style	Thk.	Wd.	Lg.	Hole Dia.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Mounting Hole Style	For Screw Size		Each
Steel Case



		1	1/4"	7/8"	1"	1/8"	7	175	C8	Straight	No. 4	57005K21	00000


		2	5/16"	13/16"	1"	3/16"	8	175	C8	Straight	No. 8	57005K22	0000
		2	5/8"	1"	2"	3/16"	45	175	C8	Straight	No. 8	57005K23	0000
		3	5/16"	15/16"	2 5/8"	5/32"	6	175	C8	Straight	No. 6	57005K24	0000
		3	1 3/8"	7/8"	3 1/4"	9/32"	40	600	C5	Straight	1/4"	57005K31	00000
		3	1 3/8"	7/8"	5 1/4"	9/32"	65	600	C5	Straight	1/4"	57005K33	00000
		3	1 3/8"	1 1/4"	3 1/4"	9/32"	55	600	C5	Straight	1/4"	57005K57	00000
		3	1 3/8"	1 1/4"	5 1/4"	9/32"	120	600	C5	Straight	1/4"	57005K34	00000
		3	2 1/8"	1 7/8"	5 1/4"	9/32"	250	600	C5	Straight	1/4"	57005K38	00000


		Zinc-Plated Steel Case



				2	13/32"	1"	1 1/4"	0.14"	15	170	—	Straight	No. 6	57005K37	0000


				3	3/8"	1 3/8"	5 1/2"	9/32"	46	170	C5	Straight	1/4"	57005K61	0000
				3	7/16"	1 33/64"	6"	1/4"	100	170	—	Straight	1/4"	57005K52	00000
				3	29/64"	1 3/64"	8"	0.435"	60	170	—	Straight	3/8"	57005K53	00000
				3	29/64"	1 1/2"	3"	3/16"	45	170	C8	Straight	No. 8	57005K87	0000
				3	29/64"	1 1/2"	8"	3/16"	120	170	C8	Straight	No. 8	57005K88	00000
				3	29/64"	1 1/2"	12"	3/16"	180	170	C8	Straight	No. 8	57005K89	00000
				3	15/32"	1 3/64"	2 45/64"	0.192"	25	170	—	Straight	No. 8	57005K51	0000
				3	1/2"	1 3/8"	5 1/2"	9/32"	53	170	C5	Straight	1/4"	57005K62	00000
				3	5/8"	1 1/2"	12"	9/32"	119	170	C5	Straight	1/4"	57005K63	00000
				3	5/8"	1 23/32"	12"	1/4"	150	170	—	Straight	1/4"	57005K54	00000


				3	5/8"	2"	12"	9/32"	123	170	C5	Straight	1/4"	57005K64	00000
				3	5/8"	2 1/2"	12"	9/32"	128	170	C5	Straight	1/4"	57005K65	00000
				4	1"	1 5/8"	2"	7/32"	35	170	C8	Straight	No. 10	57005K27	00000


				Nickel-Plated Steel Case



						3	9/16"	1"	4 1/2"	9/32"	40	175	C5	Straight	1/4"	57005K41	0000


						3	9/16"	1"	6 1/2"	9/32"	55	175	C5	Straight	1/4"	57005K42	00000
						3	9/16"	1"	12 1/2"	9/32"	120	175	C5	Straight	1/4"	57005K43	00000


						Cadmium-Plated Steel Case



								3	1/2"	1 3/16"	2 3/4"	3/16"	35	175	C8	Straight	No. 8	57005K25	0000


								Stainless Steel Case



										3	3/8"	1 3/8"	3 1/4"	0.28"	25	300	C8	Straight	1/4"	57005K98	00000


3	9/16"									1 3/8"	3 1/4"	0.28"	31	300	C8	Straight	1/4"	57005K99	00000

Ceramic Rectangle Magnets

Magnetized

Through

Thickness

Standard Magnets

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

	Wd.	Lg.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Direction of Magnetization		Each
1/8" Thick



		1"	2"	0.9	400	C8	Through Thickness	5738K52	00000


		3/16" Thick



				1"	2"	1.7	400	C8	Through Thickness	5738K53	0000


				1/4" Thick



						1/4"	1 1/4"	2	400	C5	Through Thickness	5738K78	0000


						1/4"	3"	1.4	400	C5	Through Thickness	5738K62	0000
						3/8"	3/4"	1.5	400	C5	Through Thickness	5738K73	0000
						3/8"	1 1/2"	1.2	400	C5	Through Thickness	5738K61	0000
						1/2"	1"	1	400	C1	Through Thickness	5738K75	0000
						3/4"	3/4"	2.1	400	C5	Through Thickness	5738K74	0000
						1"	2"	5	400	C8	Through Thickness	5738K32	0000
						2"	3"	3	400	C5	Through Thickness	5738K63	0000
						4"	4"	7	400	C8	Through Thickness	5738K67	00000


						3/8" Thick



								7/8"	1 7/8"	6	400	C8	Through Thickness	5738K31	0000


								1/2" Thick



										1/2"	1/2"	1.6	400	C5	Through Thickness	5738K76	0000


										1"	2"	7	400	C8	Through Thickness	5738K33	0000
										1"	6"	7	400	C5	Through Thickness	5738K64	00000
										2"	3"	13	400	C8	Through Thickness	5738K68	0000
										4"	6"	23	400	C8	Through Thickness	5738K69	00000


										3/4" Thick



												1"	2"	9	400	C8	Through Thickness	5738K34	0000


												1"	10 1/2"	21	400	C8	Through Thickness	5738K54	00000


												1" Thick



1/2"														2"	6	400	C8	Through Thickness	5738K55	0000


1"	1"													6	400	C5	Through Thickness	5738K77	0000
1"	2"													11	400	C8	Through Thickness	5738K35	0000
1 1/4"	2"													11	400	C8	Through Thickness	5738K56	0000
1 1/2"	2"													13	400	C8	Through Thickness	5738K57	0000
2"	2"	15												400	C8	Through Thickness	5738K36	0000
2"	3"	24	400											C5	Through Thickness	5738K66	00000
2"	6"	21	400											C5	Through Thickness	5738K65	00000
2"	10 1/2"	35	400											C8	Through Thickness	5738K58	00000
3"	6"	48	400											C8	Through Thickness	5738K71	00000
4"	6"	35	400											C8	Through Thickness	5738K51	00000

Flexible Cut-to-Size Ceramic Rectangle Magnets

Bend these nonconductive magnets around corners or stretch them over uneven surfaces where rigid magnets can’t grip. All are bonded to rubber for flexibility. Use scissors to cut them into custom shapes and sizes.

Standard Magnets

Holding Power on One

Face

Holding Power on Two

Faces

	Wd.	Max. Pull	No. of Faces with Holding Power	Max. Temp., ° F	Choose a Length, ft.		Per Ft.
0.01" Thick



		24 3/8"	36 psf	1	150	5, 10, 20, 50	5756K12	00000


		1/64" Thick



				24 3/8"	Not Rated	1	150	1, 3, 5, 10, 20, 50	5756K31	0000


				0.02" Thick



						24 3/8"	Not Rated	1	150	5, 10, 20, 50	5756K32	0000


						0.025" Thick



								24 3/8"	Not Rated	1	150	1, 2, 3, 4, 5, 6, 10, 20, 25, 50	5756K33	0000


								1/32" Thick



										1/4"	1.4 lbf/ft	1	150	5, 10, 20, 50, 100	5759K11	0000


										1/4"	2 lbf/ft	1	150	5, 10, 20, 50, 100	5769K63	0000
										3/8"	2 lbf/ft	1	150	5, 10, 20, 50, 100	5759K13	0000
										3/8"	2.8 lbf/ft	1	150	5, 10, 20, 50, 100	5769K65	0000
										3/4"	Not Rated	1	150	5, 10, 20, 50, 100	5699K24	0000
										1"	6 lbf/ft	2	150	5, 10, 20, 50, 100	4774K34	0000
										1"	Not Rated	1	150	5, 10, 20, 50, 100, 200	5699K16	0000
										1 1/2"	Not Rated	1	150	5, 10, 20, 50, 100	5699K26	0000
										2"	13 lbf/ft	2	150	5, 10, 20, 50, 100	4774K36	0000
										2"	16 lbf/ft	2	150	5, 10, 20, 50, 100	4774K45	0000
										2"	Not Rated	1	150	5, 10, 20, 50, 100	5699K55	0000


										3"	Not Rated	1	150	5, 10, 20, 50, 100	5699K29	0000
										4"	26 lbf/ft	1	150	5, 10, 20, 50, 100	5759K15	0000
										4"	35 lbf/ft	1	150	5, 10, 20, 50, 100	5769K67	0000
										24 3/8"	Not Rated	1	150	1, 2, 3, 4, 5, 6, 8, 10, 12, 20, 25, 50	5756K35	0000


										1/16" Thick



												1/4"	2.7 lbf/ft	1	150	5, 10, 20, 50, 100	5759K17	0000


												1/4"	3.9 lbf/ft	1	150	5, 10, 20, 50, 100	5769K69	0000
												3/8"	4 lbf/ft	1	150	5, 10, 20, 50, 100	5759K19	0000
												1/2"	9 lbf/ft	1	150	5, 10, 20, 50, 100	5769K21	0000
												1"	13 lbf/ft	2	150	5, 10, 20, 50, 100	4774K38	0000
												1"	16 lbf/ft	2	150	5, 10, 20, 50, 100	4774K47	0000
1"												18 lbf/ft	1	150	5, 10, 20, 50, 100	5769K41	0000
1"	Not Rated											1	150	5, 10, 20, 50, 100	5699K17	0000
1 1/2"	Not Rated											1	150	5, 10, 20, 50, 100	5699K27	0000
2"	26 lbf/ft											2	150	5, 10, 20, 50, 100	4774K41	0000
2"	Not Rated											1	150	5, 10, 20, 50, 100	5699K62	0000


3"	45 lbf/ft	2										150	5, 10, 20, 50, 100	4774K29	0000
3"	50 lbf/ft	1	150									5, 10, 20, 50, 100	5769K51	0000
3"	Not Rated	2	150									5, 10, 20, 50, 100	4774K24	0000
4"	50 lbf/ft	1	150									5, 20, 50, 100	5759K22	0000
4"	70 lbf/ft	1	150									5, 10, 20, 50, 100	5769K76	0000
24 3/8"	Not Rated	1	150									1, 2, 3, 4, 5, 6, 8, 10, 20, 25, 30, 50	5756K36	00000


1/8" Thick



		1/4"	3 lbf/ft	1	150							5, 10, 20, 50, 100	5759K34	0000


		1/4"	4 lbf/ft	1	150	5, 10, 20, 50, 100						5769K78	0000
		3/8"	4 lbf/ft	1	150	5, 10, 20, 50, 100	5759K37					0000
		1/2"	12 lbf/ft	1	150	5, 10, 20, 50, 100	5769K22					0000
		1/2"	Not Rated	1	150	5, 10, 20, 100	5699K11					0000
		3/4"	12 lbf/ft	1	150	5, 10, 20, 50, 100	5699K41					0000
		3/4"	18 lbf/ft	1	150	5, 10, 20, 50, 100	5769K32					0000
		1"	24 lbf/ft	1	150	5, 10, 20, 50, 100	5769K42	0000
		1"	Not Rated	1	150	5, 10, 20, 50, 100	5699K12	0000
		1 1/2"	31 lbf/ft	1	150	5, 10, 20, 50, 100	5769K45	0000
		1 1/2"	Not Rated	1	150	5, 10, 20, 100	5699K42	0000


		2"	Not Rated	1	150	5, 10, 20, 50, 100	5699K68	0000
		3"	70 lbf/ft	1	150	5, 10, 20, 50	5769K52	0000
		3"	Not Rated	1	150	5, 10, 20, 50, 100	5699K49	0000
		4"	55 lbf/ft	1	150	5, 10, 20, 50, 100	5759K43	0000
		4"	80 lbf/ft	1	150	5, 10, 20, 50, 100	5769K86	00000


		3/16" Thick



				61/64"	25 lbf/ft	1	150	5, 10, 20, 50, 100	5769K49			0000


				61/64"	Not Rated	1	150	5, 10, 20, 100	5699K13			0000
				1 1/2"	35 lbf/ft	1	150	5, 10, 20, 50, 100	5769K54			0000
				3"	65 lbf/ft	2	150	5, 10, 20, 50, 100	4774K32			00000
				3"	Not Rated	2	150	5, 10, 20, 50	4774K26			0000


				1/4" Thick



						5/8"	14 lbf/ft	1	150	5, 10, 20, 50, 100	5769K56	0000


						5/8"	Not Rated	1	150	5, 10, 20, 50, 100	5699K73	0000
						2"	50 lbf/ft	1	150	5, 10, 20, 50, 100	5769K58	00000
						2"	Not Rated	1	150	5, 10, 20, 50	5699K74	0000

Magnets With Adhesive Back

Holding Power on One

Face

Holding Power on Two

Faces

	Wd.	Max. Pull	No. of Faces with Holding Power	Max. Temp., ° F	Adhesive Material	Choose a Length, ft.		Per Ft.
1/64" Thick



		24 3/8"	36 psf	1	150	Rubber	1, 5, 10, 20, 50	5756K11	00000


		24 3/8"	Not Rated	1	150	Rubber	1, 2, 3, 5, 10, 20, 50	5756K51	0000


		0.02" Thick



				24 3/8"	Not Rated	1	150	Rubber	1, 5, 10, 20, 50	5756K52	0000


				1/32" Thick



						1/4"	1.4 lbf/ft	1	150	Acrylic Plastic	5, 10, 20, 50, 100	5759K12	0000


						1/4"	2 lbf/ft	1	150	Acrylic Plastic	5, 10, 20, 50, 100	5769K64	0000
						3/8"	2.8 lbf/ft	1	150	Acrylic Plastic	5, 10, 20, 50, 100	5769K66	0000
						1/2"	Not Rated	1	150	Rubber	5, 10, 20, 50, 100, 200	5759K26	0000
						3/4"	Not Rated	1	150	Rubber	5, 10, 20, 50, 100	5759K36	0000
						1"	6 lbf/ft	2	150	Acrylic Plastic	5, 10, 20, 50, 100	4774K35	0000
						1"	8 lbf/ft	2	150	Acrylic Plastic	5, 10, 20, 50, 100	4774K44	0000
						1"	Not Rated	1	150	Rubber	5, 10, 20, 50, 100, 200	5759K28	0000
						1 1/2"	Not Rated	1	150	Rubber	5, 10, 20, 50, 100, 200	5759K38	0000
						2"	13 lbf/ft	2	150	Acrylic Plastic	5, 10, 20, 50, 100	4774K37	0000
						2"	16 lbf/ft	2	150	Acrylic Plastic	5, 10, 20, 50, 100	4774K46	0000


						2"	Not Rated	1	150	Rubber	5, 10, 20, 50, 100	5759K75	0000
						3"	Not Rated	1	150	Rubber	5, 10, 20, 50, 100, 200	5759K39	0000
						4"	26 lbf/ft	1	150	Acrylic Plastic	5, 10, 20, 50, 100	5759K16	0000
						4"	35 lbf/ft	1	150	Acrylic Plastic	5, 10, 20, 50, 100	5769K68	0000
						24 3/8"	Not Rated	1	150	Rubber	1, 2, 3, 4, 5, 6, 10, 20, 25, 50	5756K55	0000


						1/16" Thick



								1/4"	2.7 lbf/ft	1	150	Acrylic Plastic	5, 10, 20, 50, 100	5759K18	0000


								1/4"	3.9 lbf/ft	1	150	Acrylic Plastic	5, 10, 20, 50, 100	5769K73	0000
								3/8"	4 lbf/ft	1	150	Acrylic Plastic	5, 10, 20, 50, 100	5759K21	0000
								3/8"	5 lbf/ft	1	150	Acrylic Plastic	5, 10, 20, 50, 100	5769K75	0000
								1/2"	9 lbf/ft	1	150	Rubber	5, 10, 20, 50, 100	5769K61	0000
								1/2"	Not Rated	1	150	Rubber	5, 10, 20, 50, 100	5759K27	0000
								3/4"	13 lbf/ft	1	150	Rubber	5, 10, 20, 50, 100	5769K71	0000
								3/4"	Not Rated	1	150	Rubber	5, 10, 20, 50, 100	5759K47	0000
								1"	13 lbf/ft	2	150	Acrylic Plastic	5, 10, 20, 50, 100	4774K39	0000
								1"	18 lbf/ft	1	150	Rubber	5, 10, 20, 50, 100	5769K81	0000
								1"	Not Rated	1	150	Rubber	5, 10, 20, 50, 100	5759K29	0000


								1 1/2"	Not Rated	1	150	Rubber	5, 10, 20, 50, 100	5759K49	0000
								2"	26 lbf/ft	2	150	Acrylic Plastic	5, 10, 20, 50, 100	4774K42	0000
								2"	32 lbf/ft	2	150	Acrylic Plastic	5, 10, 20, 50, 100	4774K51	0000
2"								35 lbf/ft	1	150	Acrylic Plastic	5, 10, 20, 50, 100	5769K44	0000
2"	Not Rated							1	150	Rubber	5, 10, 20, 50, 100	5759K82	0000
3"	27 lbf/ft							2	150	Acrylic Plastic	5, 10, 20, 50, 100	4774K27	0000
3"	45 lbf/ft							2	150	Acrylic Plastic	5, 10, 20, 50, 100	4774K31	00000
3"	50 lbf/ft							1	150	Rubber	5, 10, 20, 50, 100	5769K91	0000
3"	Not Rated							1	150	Rubber	5, 10, 20, 50, 100	5759K59	0000
4"	50 lbf/ft							1	150	Acrylic Plastic	5, 10, 20, 50, 100	5759K33	0000


4"	70 lbf/ft							1	150	Acrylic Plastic	5, 10, 20, 50, 100	5769K77	00000
24 3/8"	Not Rated	1						150	Rubber	1, 2, 3, 4, 5, 6, 10, 20, 50	5756K56	00000


1/8" Thick



		1/4"	3 lbf/ft					1	150	Acrylic Plastic	5, 10, 20, 50, 100	5759K35	0000


		1/4"	4 lbf/ft	1	150			Acrylic Plastic	5, 10, 20, 50, 100	5769K79	0000
		1/2"	12 lbf/ft	1	150			Rubber	5, 10, 20, 50	5769K62	0000
		3/4"	18 lbf/ft	1	150			Rubber	5, 10, 20, 50	5769K72	0000
		3/4"	Not Rated	1	150			Rubber	5, 10, 20, 100	5759K63	0000
		1"	24 lbf/ft	1	150			Rubber	5, 10, 20, 50	5769K82	0000
		1"	Not Rated	1	150			Rubber	5, 10, 20, 50, 100	5759K24	0000
		1 1/2"	31 lbf/ft	1	150			Acrylic Plastic	5, 10, 20, 50, 100	5769K46	0000
		1 1/2"	Not Rated	1	150			Rubber	5, 10, 20, 50, 100	5759K64	0000
		2"	40 lbf/ft	1	150			Acrylic Plastic	5, 10, 20, 50, 100	5769K48	00000
		2"	Not Rated	1	150			Rubber	5, 10, 20, 50, 100	5759K88	0000


		3"	70 lbf/ft	1	150			Rubber	5, 10, 20, 50	5769K92	0000
		3"	Not Rated	1	150			Rubber	5, 10, 20, 100	5759K69	0000
		4"	55 lbf/ft	1	150			Acrylic Plastic	5, 10, 20, 50, 100	5759K44	00000
		4"	80 lbf/ft	1	150			Acrylic Plastic	5, 10, 20, 50, 100	5769K87	00000


		3/16" Thick



				61/64"	25 lbf/ft			1	150	Acrylic Plastic	5, 10, 20, 50, 100	5769K53	0000


				61/64"	Not Rated	1		150	Rubber	5, 10, 20, 50, 100	5759K25	0000
				1 1/2"	35 lbf/ft	1	150	Acrylic Plastic	5, 10, 20, 50, 100	5769K55	00000
				1 1/2"	Not Rated	1	150	Rubber	5, 10, 20, 50, 100	5759K92	0000
				3"	65 lbf/ft	2	150	Acrylic Plastic	5, 10, 20, 50, 100	4774K33	00000


				1/4" Thick



						5/8"	14 lbf/ft	1	150	Acrylic Plastic	5, 10, 20, 50, 100	5769K57	00000


						5/8"	Not Rated	1	150	Rubber	5, 10, 20, 50, 100	5759K93	0000
						2"	50 lbf/ft	1	150	Acrylic Plastic	5, 10, 20, 50, 100	5769K59	00000
						2"	Not Rated	1	150	Rubber	5, 10, 20, 50	5759K94	0000

Alnico U Magnets


1	2

3	Magnetized Through Length

Hold or lift metal parts with confidence. The U-shape brings the north and south poles close together, creating a dense magnetic field for powerful pull force. These heat-resistant magnets won’t melt, deform, or lose magnetic strength in temperatures up to 970° F. Also known as horseshoe magnets.

Standard Magnets


1	Magnetized Through Length

Magnetized Through Length—Magnetized end to end, these magnets channel magnetic energy on the longest axis. This orientation creates deep field penetration and directional pull.

	Wd.	Opening Wd.	Wd. at Poles	Lg.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Direction of Magnetization		Each
1/4" Thick



	1	1 7/64"	13/32"	47/64"	1 1/8"	6	970	Alnico 5	Through Length	5842K11	000000


	19/64" Thick



			1	1 1/8"	1/4"	29/32"	1"	2.2	970	Alnico 5	Through Length	5841K11	0000


			1	1 1/8"	1/4"	29/32"	1"	5	970	Alnico 5	Through Length	5841K22	00000


			7/16" Thick



					1	1 1/2"	3/8"	1 1/4"	1 1/4"	9	970	Alnico 5	Through Length	5842K12	00000


					5/8" Thick



							1	1 13/16"	3/8"	1 5/8"	1 9/16"	22	970	Alnico 5	Through Length	5842K13	000000


							3/4" Thick



									1	3"	1"	2 1/2"	2 1/2"	60	970	Alnico 5	Through Length	5842K19	000000


									1 1/4" Thick



											1	5"	1 1/2"	4"	4 1/8"	210	970	Alnico 5	Through Length	5842K22	000000

Magnets With Unthreaded Hole


2	3	Magnetized Through Length

Magnetized Through Length—Magnetized end to end, these magnets channel magnetic energy on the longest axis. This orientation creates deep field penetration and directional pull.

	Wd.	Opening Wd.	Wd. at Poles	Hole Dia.	Lg.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Direction of Magnetization	Mounting Hole Style		Each
3/4" Thick



	3	1 1/8"	9/16"	1 1/16"	3/16"	3/4"	13	970	Alnico 5	Through Length	Straight	5841K12	000000


	25/32" Thick



			3	1 3/16"	0.59"	1 3/16"	0.197"	25/32"	9	970	Alnico 5	Through Length	Straight	5841K33	00000


			15/16" Thick



					2	2 3/16"	1 3/16"	2 3/16"	3/16"	1 13/16"	32	970	Alnico 5	Through Length	Straight	5841K15	00000


					2	2 7/16"	1 3/16"	2 7/16"	1/4"	2"	35	970	Alnico 5	Through Length	Straight	5841K16	00000
					2	2 5/8"	1 3/8"	2 5/8"	1/4"	2 1/4"	40	970	Alnico 5	Through Length	Straight	5841K17	00000
					2	3"	1 1/2"	3"	1/4"	2 1/2"	50	970	Alnico 5	Through Length	Straight	5841K18	00000


					63/64" Thick



							3	1 37/64"	0.787"	1 37/64"	0.197"	63/64"	19	970	Alnico 5	Through Length	Straight	5841K44	00000


							1" Thick



									2	3"	1 3/4"	3"	3/16"	1 11/16"	55	970	Alnico 5	Through Length	Straight	5842K18	00000


									3	1 1/2"	3/4"	1 3/8"	3/16"	1"	22	970	Alnico 5	Through Length	Straight	5841K13	00000


									1 1/8" Thick



											3	1 3/4"	7/8"	1 1/2"	3/16"	1 1/8"	30	970	Alnico 5	Through Length	Straight	5841K14	00000


											1 3/16" Thick



													3	1 49/64"	29/32"	1 49/64"	0.197"	1 3/16"	25	970	Alnico 5	Through Length	Straight	5841K55	00000


													1 7/8" Thick



															3	2 1/2"	1 3/8"	2 1/2"	1/4"	1 13/16"	70	970	Alnico 5	Through Length	Straight	5841K19	000000

Alnico Disc Magnets

Our most heat-resistant magnets won’t melt, deform, or lose magnetic strength in temperatures up to 1020° F. Use them in everything from magnetos and flow meters to fixturing tools. However, their magnetic hold isn't as strong as neodymium magnets.

Standard Magnets

Magnetized

Through

Thickness

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Direction of Magnetization		Each
1/8" Thick



	1/8"	0.06	970	Alnico 8	Through Thickness	57295K71	00000


	1/4" Thick



			1/8"	0.2	970	Alnico 8	Through Thickness	57295K82	0000


			1/4"	0.3	970	Alnico 8	Through Thickness	57295K73	0000
			3/8"	0.3	970	Alnico 8	Through Thickness	57295K75	0000
			1/2"	0.4	970	Alnico 8	Through Thickness	57295K77	0000


			1/2" Thick



					1/4"	1	970	Alnico 8	Through Thickness	57295K74	0000


					1" Thick



							19/64"	1.1	1,020	Alnico 5	Through Thickness	5852K31	0000


							2" Thick



									19/64"	1.5	1,020	Alnico 5	Through Thickness	5852K32	0000


									3" Thick



											19/64"	1.5	1,020	Alnico 5	Through Thickness	5852K33	0000


											4" Thick



													1/8"	0.3	1,020	Alnico 5	Through Thickness	5852K11	0000


													1/8"	0.4	1,020	Alnico 8	Through Thickness	57305K64	00000
													1/4"	1.5	1,020	Alnico 8	Through Thickness	57305K68	00000
													19/64"	1.9	1,020	Alnico 5	Through Thickness	5852K34	0000
													3/8"	1.4	1,020	Alnico 8	Through Thickness	57305K72	00000
													5/8"	7	1,020	Alnico 8	Through Thickness	57305K74	000000


													5" Thick



3/16"															0.7	1,020	Alnico 5	Through Thickness	5852K12	0000


6" Thick



															1/4"	1.4	1,020	Alnico 5	Through Thickness	5852K13	00000


	19/64"	2.2													1,020	Alnico 5	Through Thickness	5852K35	00000


	8" Thick



															19/64"	2.2	1,020	Alnico 5	Through Thickness	5852K14	00000


															3/8"	3	1,020	Alnico 5	Through Thickness	5852K15	00000
			1/2"												4	1,020	Alnico 5	Through Thickness	5852K16	00000

Magnets With Unthreaded Hole


	Magnetized Through Thickness

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

	Hole Dia.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Direction of Magnetization	Mounting Hole Style		Each
1/8" Thick



	3/8"	3/32"	0.4	970	Alnico 8	Through Thickness	Straight	57335K62	000000


	9/64" Thick



			17/32"	1/4"	0.1	970	Alnico 8	Through Thickness	Straight	57335K64	0000


			7/32" Thick



					1 9/32"	0.532"	0.3	970	Alnico 8	Through Thickness	Straight	57335K68	00000


					17/64" Thick



							29/32"	0.475"	0.8	970	Alnico 8	Through Thickness	Straight	57335K66	00000


							1/2" Thick



									1"	3/4"	1.3	970	Alnico 5	Through Thickness	Straight	5704K14	00000


									3/4" Thick



											1 1/2"	1 1/8"	3	970	Alnico 5	Through Thickness	Straight	5704K16	00000


											1" Thick



													2"	1 1/2"	6	970	Alnico 5	Through Thickness	Straight	5704K18	00000


													1 1/4" Thick



															2 1/2"	1 7/8"	8	970	Alnico 5	Through Thickness	Straight	5704K19	00000


															1 1/2" Thick



																	3"	2 1/4"	14	970	Alnico 5	Through Thickness	Straight	5704K21	000000

Nonmarring Encased Neodymium Disc Magnets

These safeguarded magnets grip surfaces without marking them. The rubber-coated case protects metal housings and control panels from scratches and adds friction for a tight grip. It also shields the magnet from cracks and chips caused by drops and bumps. With the highest strength-to-size ratio of any magnet, these deliver powerful pull force even in tight spaces.

Magnets With Unthreaded Hole

Zinc-Plated Steel Case—Withstands occasional exposure to moisture.

Chrome-Plated Steel Case—The bright, shiny finish resists salt water and chemicals better than other finishes and is less likely to wear off.

											Each
	Thk.	OD	Hole Dia.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Cover Material	For Screw Size	Choose a Color		1-49	50-Up
Zinc-Plated Steel Case



		6 mm	22 mm	4 mm	7	175	—	Rubber	M3	Black, White	5679K111	000000	000000


		6 mm	31 mm	6 mm	16	175	—	Rubber	M5	Black, White	5679K112	00000	00000
		7.5 mm	57 mm	8 mm	39	175	—	Rubber	M7	Black, White	5679K113	00000	00000
		8.5 mm	66 mm	5.5 mm	47	175	—	Rubber	M5	Black, White	5679K114	00000	00000


		Chrome-Plated Steel Case



				13/64"	1 1/4"	0.138"	16	175	N35	Rubber	No. 5	Silver	5679K48	0000	0000


				9/32"	1 29/64"	0.197"	20	175	N42	Rubber	No. 8	Silver	5679K49	0000	0000
				21/64"	2 3/64"	0.197"	55	175	N40	Rubber	No. 8	Silver	5679K51	00000	00000
				11/32"	2 3/8"	0.197"	63	160	N35	Silicone Rubber	No. 8	Black	5679K85	00000	00000
				13/32"	2 21/32"	0.275"	70	175	N40	Rubber	1/4"	Silver	5679K52	00000	00000
				7/16"	3 3/16"	0.27"	75	160	N35	Silicone Rubber	1/4"	Black	5679K86	00000	00000
				33/64"	3 7/8"	0.378"	90	160	N35	Silicone Rubber	3/8"	Black	5679K87	00000	00000

Neodymium Ball Magnets

Attract metal from all angles. These magnets create an even magnetic field around the sphere. They’re often used in rotating assemblies and sensor-calibration systems where full magnetic exposure is a must. With the highest strength-to-size ratio of any magnet, these deliver powerful pull force even in tight spaces.

Standard Magnets


	Magnetized Through Thickness

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force.

							Each
OD	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Direction of Magnetization	Finish		1-49	50-Up



	1/8"	0.5	175	N52	Through Thickness	Nickel Plated	3945K31	00000	00000


	3/16"	1.1	175	N52	Through Thickness	Nickel Plated	3945K32	0000	0000
	1/4"	1	170	N35	Through Thickness	Nickel Plated	3945K2	0000	0000
	1/2"	2	170	N35	Through Thickness	Nickel Plated	3945K3	00000	0000
	3/4"	4	170	N35	Through Thickness	Nickel Plated	3945K4	00000	00000
	1"	28	175	N35	Through Thickness	Nickel Plated	3945K11	00000	00000

Alnico Rectangle Magnets

Magnetized

Through

Length

Standard Magnets

Magnetized Through Length—Magnetized end to end, these magnets channel magnetic energy on the longest axis. This orientation creates deep field penetration and directional pull.

	Lg.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Direction of Magnetization		Each
1/8" Thick



	1/8"	3/8"	0.3	1,020	Alnico 8	Through Length	57315K41	00000


	1/4"	1/2"	0.6	1,020	Alnico 8	Through Length	57315K45	0000
	3/8"	4"	1.7	1,020	Alnico 5	Through Length	5851K11	0000
	1/2"	4"	1.7	1,020	Alnico 5	Through Length	5851K12	0000


	3/16" Thick



			3/8"	4"	1.7	1,020	Alnico 5	Through Length	5851K13	0000


			1/4" Thick



					1/4"	4"	1.6	1,020	Alnico 8	Through Length	57315K47	00000


					1/4"	6"	1.2	1,020	Alnico 5	Through Length	5851K14	00000
					1/2"	6"	1.9	1,020	Alnico 5	Through Length	5851K16	00000


					3/8" Thick



							3/8"	6"	2.8	1,020	Alnico 5	Through Length	5851K15	00000


							1/2" Thick



									1/2"	6"	5	1,020	Alnico 5	Through Length	5851K19	00000


									3/4"	6"	11	1,020	Alnico 5	Through Length	5851K18	00000
									1"	6"	13	1,020	Alnico 5	Through Length	5851K21	00000


									3/4" Thick



											3/4"	6"	15	1,020	Alnico 5	Through Length	5851K22	00000


											1" Thick



													1"	6"	19	1,020	Alnico 5	Through Length	5851K23	000000

Machinable Neodymium Disc Magnets

Cut, drill, or shape to your exact needs. These magnets are bonded with epoxy, making them soft enough to machine with carbide tooling while preserving their magnetic strength.

Standard Magnets

Magnetized

Through

Thickness

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

							Each
	OD	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Direction of Magnetization		1-49	50-Up
5/64" Thick



		13/64"	0.3	300	N10SH	Through Thickness	5902K47	00000	00000


		15/64"	0.3	300	N10SH	Through Thickness	5902K52	0000	0000


		0.118" Thick



				21/64"	0.7	300	N10SH	Through Thickness	5902K55	0000	0000


				19/32"	1.3	300	N10SH	Through Thickness	5902K61	0000	0000


				1/8" Thick



						1/4"	0.7	180	N10	Through Thickness	5902K11	0000	0000


						1/2"	1.4	180	N10	Through Thickness	5902K14	0000	0000
						1"	2.9	180	N10	Through Thickness	5902K18	00000	00000


						9/64" Thick



								0.118"	0.3	300	N10SH	Through Thickness	5902K43	0000	0000


								5/32" Thick



										13/64"	0.6	300	N10SH	Through Thickness	5902K48	0000	0000


										15/64"	0.7	300	N10SH	Through Thickness	5902K53	0000	0000


										3/16" Thick



												3/4"	3	180	N10	Through Thickness	5902K16	00000	00000


												0.2" Thick



														5/64"	0.3	300	N10SH	Through Thickness	5902K41	0000	0000


														25/64"	1.4	300	N10SH	Through Thickness	5902K56	0000	0000
														31/64"	1.8	300	N10SH	Through Thickness	5902K58	0000	0000
														19/32"	2.1	300	N10SH	Through Thickness	5902K62	00000	0000
51/64"														2.9	300	N10SH	Through Thickness	5902K65	00000	00000
63/64"	3													300	N10SH	Through Thickness	5902K68	00000	00000


1/4" Thick



														1/4"	1.4	180	N10	Through Thickness	5902K12	0000	0000


		3/8"												2.2	180	N10	Through Thickness	5902K13	0000	0000
		1/2"	2.9											180	N10	Through Thickness	5902K15	00000	0000
		3/4"	4											180	N10	Through Thickness	5902K17	00000	00000
		1"	5											180	N10	Through Thickness	5902K19	00000	00000


		0.276" Thick



														0.118"	0.6	300	N10SH	Through Thickness	5902K44	0000	0000


				5/32"	0.8									300	N10SH	Through Thickness	5902K45	0000	0000
				13/64"	1									300	N10SH	Through Thickness	5902K49	0000	0000


				0.303" Thick



														19/32"	3	300	N10SH	Through Thickness	5902K63	00000	00000


						51/64"	4							300	N10SH	Through Thickness	5902K66	00000	00000


						25/64" Thick



								5/64"	0.6					300	N10SH	Through Thickness	5902K42	0000	0000


								5/32"	1.1					300	N10SH	Through Thickness	5902K46	0000	0000
								13/64"	1.4					300	N10SH	Through Thickness	5902K51	0000	0000
								15/64"	1.7					300	N10SH	Through Thickness	5902K54	0000	0000
								25/64"	2.9					300	N10SH	Through Thickness	5902K57	0000	0000
								31/64"	3					300	N10SH	Through Thickness	5902K59	00000	00000
								19/32"	4					300	N10SH	Through Thickness	5902K64	00000	00000
								51/64"	5	300	N10SH			Through Thickness	5902K67	00000	00000
								63/64"	7	300	N10SH			Through Thickness	5902K69	00000	00000


								1/2" Thick



										1"	11	180	N10	Through Thickness	5902K21	00000	00000

Magnets With Unthreaded Hole


	Magnetized Through Thickness

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

									Each
	OD	Hole Dia.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Direction of Magnetization	Mounting Hole Style		1-49	50-Up
0.197" Thick



		1.023"	0.866"	0.6	300	N10SH	Through Thickness	Straight	5901K71	000000	00000


		1.181"	0.63"	2	300	N10SH	Through Thickness	Straight	5901K73	00000	00000
		1 3/8"	0.811"	2	300	N10SH	Through Thickness	Straight	5901K75	00000	00000


		25/64" Thick



				1.023"	0.866"	1.1	300	N10SH	Through Thickness	Straight	5901K72	00000	00000


				1.181"	0.63"	4	300	N10SH	Through Thickness	Straight	5901K74	00000	00000
				1 3/8"	0.811"	4	300	N10SH	Through Thickness	Straight	5901K76	00000	00000

Flexible Neodymium Rectangle Magnets

Bend around corners or stretch over uneven surfaces where rigid magnets can’t grip. All are bonded to rubber for flexibility. They also deliver a stronger magnetic hold than our flexible ceramic magnets. Use scissors to cut them into custom shapes and sizes.

Standard Magnets

Holding Power on One

Face

Holding Power on Two

Faces

					6" Long		12" Long		24" Long		6 ft. Long
	Wd.	Max. Pull	No. of Faces with Holding Power	Max. Temp., ° F		Each		Each		Each		Each
1/32" Thick



		1/2"	Not Rated	1	170	3651K801	00000	3651K802	000000	3651K803	000000	3651K804	000000


		1/2"	Not Rated	2	170	3651K827	0000	3651K828	00000	3651K829	00000	3651K83	00000
		1"	Not Rated	1	170	3651K805	00000	3651K806	00000	3651K807	00000	3651K808	00000
		1"	Not Rated	2	170	3651K831	00000	3651K832	00000	———	0	3651K834	00000
		2"	Not Rated	1	170	3651K809	00000	3651K81	00000	3651K811	00000	3651K812	000000
		3"	Not Rated	1	170	3651K813	00000	3651K814	00000	———	0	3651K816	000000


		1/16" Thick



				1/2"	Not Rated	1	170	3651K817	0000	3651K818	00000	3651K819	00000	3651K82	00000


				1/2"	Not Rated	2	170	3651K835	00000	3651K836	00000	3651K837	00000	3651K838	00000
				1"	Not Rated	1	170	3651K821	00000	3651K8	00000	3651K822	00000	3651K823	000000
				1"	Not Rated	2	170	3651K839	00000	3651K84	00000	3651K841	00000	3651K842	000000
				2"	Not Rated	1	170	3651K824	00000	3651K3	00000	3651K825	000000	3651K826	000000


				1/8" Thick



						1/2"	Not Rated	2	170	3651K843	00000	3651K4	00000	3651K844	00000	———	0


						1"	Not Rated	2	170	3651K845	00000	3651K7	00000	3651K846	000000	———	0

Magnets With Adhesive Back

Holding Power on One

Face

Holding Power on Two

Faces

					6" Long		12" Long		24" Long		6 ft. Long
	Wd.	Max. Pull	No. of Faces with Holding Power	Max. Temp., ° F		Each		Each		Each		Each
1/32" Thick



		1/2"	Not Rated	1	170	3651K847	00000	3651K851	000000	3651K855	000000	3651K859	000000


		1/2"	Not Rated	2	170	3651K875	0000	3651K877	00000	3651K879	00000	3651K881	00000
		1"	Not Rated	1	170	3651K848	00000	3651K852	00000	3651K856	00000	3651K86	000000
		1"	Not Rated	2	170	3651K876	00000	3651K878	00000	3651K88	00000	3651K882	000000
		2"	Not Rated	1	170	3651K849	00000	3651K853	00000	3651K857	00000	3651K861	000000
		3"	Not Rated	1	170	3651K85	00000	3651K854	00000	3651K858	000000	3651K862	000000


		1/16" Thick



				1/2"	Not Rated	1	170	3651K863	00000	3651K866	00000	3651K869	00000	3651K872	00000


				1/2"	Not Rated	2	170	3651K883	00000	3651K885	00000	3651K887	00000	3651K889	00000
				1"	Not Rated	1	170	3651K864	00000	3651K867	00000	3651K87	00000	3651K873	000000
				1"	Not Rated	2	170	3651K884	00000	3651K886	00000	3651K901	00000	3651K89	000000
				2"	Not Rated	1	170	3651K865	00000	3651K868	00000	3651K871	000000	3651K874	000000


				1/8" Thick



						1/2"	Not Rated	2	170	3651K891	00000	3651K893	00000	3651K895	00000	———	0


						1"	Not Rated	2	170	3651K892	00000	3651K894	00000	3651K896	000000	———	0

Samarium-Cobalt Disc Magnets

Magnetized

Through

Thickness

When your application calls for heat and corrosion resistance, these compact magnets deliver. They won’t melt, deform, or lose magnetic strength in temperatures up to 570° F. Plus, they stand up to moisture and mild chemicals. They’re often used in high-temperature environments with corrosive liquids, such as for sensors and rotary encoders in drill systems. Also known as rare earth magnets.

Standard Magnets

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Direction of Magnetization		Each
1/16" Thick



	3/16"	0.5	480	SmCo 18 (1:5)	Through Thickness	5716K69	00000


	0.1" Thick



			1/4"	1	480	SmCo 20 (1:5)	Through Thickness	5716K63	0000


			1/8" Thick



					1/8"	0.3	480	SmCo 20 (1:5)	Through Thickness	5716K61	0000


					0.18" Thick



							5/8"	5	480	SmCo 18 (1:5)	Through Thickness	5716K71	0000


							3/16" Thick



									1/2"	4	480	SmCo 20 (1:5)	Through Thickness	5716K66	0000


									1/2"	5	570	SmCo 24 (2:17)	Through Thickness	5768K22	0000


									13/64" Thick



											5/16"	2.3	480	SmCo 20 (1:5)	Through Thickness	5716K72	0000


											3/8"	3	480	SmCo 20 (1:5)	Through Thickness	5716K73	0000


											9/32" Thick



													3/4"	8	480	SmCo 20 (1:5)	Through Thickness	5716K67	00000


													3/4"	10	570	SmCo 24 (2:17)	Through Thickness	5768K23	00000


													3/8" Thick



															1"	14	480	SmCo 20 (1:5)	Through Thickness	5716K68	00000


1"															16	570	SmCo 24 (2:17)	Through Thickness	5768K24	00000

Nonmarring Encased Neodymium Rectangle Magnets

Magnets With Unthreaded Hole

Steel Case—Maximizes holding power by concentrating magnetic force.

Chrome-Plated Steel Case—The bright, shiny finish resists salt water and chemicals better than other finishes and is less likely to wear off.

										Each
	Thk.	Hole Dia.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Cover Material	For Screw Size	Color		1-49	50-Up
Steel Case



		1/4"	0.129"	17	160	N52	Silicone Rubber	No. 5	Black	5679K81	00000	00000


		1/4"	0.255"	30	160	N52	Silicone Rubber	1/4"	Black	5679K82	00000	00000
		1/4"	0.255"	34	160	N52	Silicone Rubber	1/4"	Black	5679K83	00000	00000
		1/4"	0.255"	37	160	N52	Silicone Rubber	1/4"	Black	5679K84	00000	00000


		Chrome-Plated Steel Case



				1/4"	0.129"	14	175	N45	Rubber	No. 5	Black	5679K41	0000	0000


				1/4"	0.15"	27	175	N45	Rubber	No. 6	Black	5679K42	00000	00000
				1/4"	0.177"	41	175	N45	Rubber	No. 8	Black	5679K43	00000	00000

Self-Aligning Neodymium Disc Paired Magnets

Align metal parts consistently without using mechanical guides. These magnet pairs automatically center as they pull together, holding components in the same position every time. Often used to align lenses and sensors, they eliminate the need for recalibration. With the highest strength-to-size ratio of any magnet, these deliver powerful pull force even in tight spaces. Also known as Polymagnets®.

Standard Magnets

						Each
	OD	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade		1-49	50-Up
1/8" Thick



		1"	32	180	N42	2520N333	000000	000000

Magnets With Adhesive Back

					Adhesive			Each
	OD	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Mfr.	Mfr. Model		1-49	50-Up
1/8" Thick



		1"	32	180	N42	3M	Very High Bond	2520N353	000000	000000

Magnets With Unthreaded Hole

									Each
	OD	Hole Dia.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Mounting Hole Style	For Screw Size		1-49	50-Up
1/8" Thick



		1"	0.19"	22	180	N42	Countersunk	No. 8	2520N343	000000	000000

Threaded Encased Alnico Disc Magnets

Thread long-lasting, heat-resistant magnets into position, then readjust if needed. They won't melt, deform, or lose magnetic strength in temperatures up to 420° F. A built-in case shields these from cracks and chips caused by drops and bumps.

Magnets With Threaded Hole

Image of Product. Front orientation. Magnets. Disc, Alnico, Encased, Threaded-Hole Mount.

Internally threaded for secure mounting with screws or bolts.

Steel Case—Maximizes holding power by concentrating magnetic force.

					Thread
	OD	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Size	Dp.		Each
Steel Case







				1/2" Thick

				1/4"	0.2	420	Alnico 5	6-32	0.188"	5736K15	000000


				3/8"	1.4	420	Alnico 5	6-32	0.188"	5736K2	00000
				1/2"	2.5	420	Alnico 5	6-32	0.188"	5736K41	00000
				5/8"	2.3	420	Alnico 5	10-24	0.188"	5736K42	00000
				3/4"	5	420	Alnico 5	10-24	0.188"	5736K51	00000
				1"	7	420	Alnico 5	1/4"-20	0.188"	5736K61	00000
				1 1/4"	6	420	Alnico 5	1/4"-20	0.188"	5736K7	00000




						5/8" Thick

						11/16"	5	420	Alnico 5	10-32	0.16"	56905K81	0000




								3/4" Thick

								1/4"	0.3	420	Alnico 5	6-32	0.188"	5736K17	00000


								3/8"	1.5	420	Alnico 5	6-32	0.188"	5736K21	00000
								1/2"	3	420	Alnico 5	6-32	0.188"	5736K39	00000
								5/8"	4	420	Alnico 5	10-24	0.188"	5736K43	00000
								3/4"	9	420	Alnico 5	10-24	0.188"	5736K52	00000
								13/16"	8	420	Alnico 5	10-32	0.19"	56905K82	00000
								1"	14	420	Alnico 5	1/4"-20	0.188"	5736K62	00000
								1 1/4"	15	420	Alnico 5	1/4"-20	0.188"	5736K71	00000




										1" Thick

										1/4"	0.4	420	Alnico 5	6-32	0.188"	5736K16	00000


										3/8"	1.7	420	Alnico 5	6-32	0.188"	5736K24	00000
										1/2"	3	420	Alnico 5	6-32	0.188"	5736K4	00000
										5/8"	4	420	Alnico 5	10-24	0.188"	5736K44	00000
										3/4"	9	420	Alnico 5	10-24	0.188"	5736K5	00000
										1"	16	420	Alnico 5	1/4"-20	0.188"	5736K66	00000
										1 1/16"	13	420	Alnico 5	10-32	1/4"	56905K83	00000
										1 1/4"	22	420	Alnico 5	1/4"-20	0.188"	5736K74	00000




												1 3/16" Thick

												1 3/8"	32	420	Alnico 5	10-32	0.3"	56905K84	00000




												1 1/4" Thick

		1 1/4"	25									420	Alnico 5	1/4"-20	0.188"	5736K75	00000

Flexible Ceramic Rectangle Magnets

Standard Magnets

Holding Power on One

Face

Holding Power on Two

Faces

	Max. Pull, lbf	No. of Faces with Holding Power	Max. Temp., ° F	Lg.	Pkg. Qty.		Pkg.
1/64" Thick



	2"	2	1	150	3 1/2"	1	5775K81	00000


	0.02" Thick



			2"	3	1	150	4"	1	5775K82	0000


			3"	6	1	150	5"	1	5775K83	0000
			5"	17	1	150	8"	1	5775K84	0000
			7"	29	1	150	10"	1	5775K85	0000


			1/32" Thick



					9"	Not Rated	2	250	24"	1	7301T19	00000


					12"	85	1	150	12"	1	5775K86	0000
					12"	128	1	150	18"	1	5775K87	00000
					12"	170	1	150	24"	1	5775K88	00000
					12"	Not Rated	2	150	24"	1	3327K5	0000


					1/16" Thick



							9"	160	2	250	12"	1	7301T11	00000


							9"	320	2	250	24"	1	7301T15	00000
							12"	Not Rated	1	150	24"	1	1834K1	00000
							12"	Not Rated	2	150	24"	1	3327K3	00000


							1/8" Thick



									9"	160	2	250	12"	1	7301T12	00000


									9"	320	2	250	24"	1	7301T16	00000


									3/16" Thick



											9"	Not Rated	2	250	12"	1	7301T13	00000


											9"	Not Rated	2	250	24"	1	7301T17	00000


											1/4" Thick



											9"	Not Rated	2	250	12"	1	7301T14	00000


											9"	Not Rated	2	250	24"	1	7301T18	00000

Magnets With Adhesive Back

Holding Power on One

Face

Holding Power on Two

Faces

	Max. Pull, lbf	No. of Faces with Holding Power	Max. Temp., ° F	Lg.	Pkg. Qty.		Pkg.
1/64" Thick



	2"	2	1	150	3 1/2"	10	5775K2	00000


	0.02" Thick



			2"	3	1	150	4"	1	5775K11	0000


			3"	6	1	150	5"	1	5775K21	0000
			5"	17	1	150	8"	1	5775K4	0000
			7"	29	1	150	10"	1	5775K6	0000


			1/32" Thick



					9"	Not Rated	2	250	24"	1	7301T29	00000


					12"	85	1	150	12"	1	5775K8	0000
					12"	128	1	150	18"	1	5775K15	0000
					12"	160	2	150	24"	1	5775K89	00000
					12"	170	1	150	24"	1	5775K17	0000


					1/16" Thick



							9"	160	2	250	12"	1	7301T21	00000


							9"	320	2	250	24"	1	7301T25	00000
							12"	200	2	150	24"	1	5775K91	00000
							12"	Not Rated	1	150	24"	1	1834K2	00000


							1/8" Thick



									9"	160	2	250	12"	1	7301T22	00000


									9"	320	2	250	24"	1	7301T26	00000


									3/16" Thick



											3/4"	Not Rated	1	150	3/4"	6	58145K73	0000


											1"	Not Rated	1	150	1"	4	58145K75	0000
											9"	Not Rated	2	250	12"	1	7301T23	00000
											9"	Not Rated	2	250	24"	1	7301T27	00000


1/4" Thick



											9"	Not Rated	2	250	12"	1	7301T24	00000


	9"										Not Rated	2	250	24"	1	7301T28	00000

Nonmarring Threaded Encased Neodymium Rectangle Magnets

Thread rectangular magnets into position without marking surfaces, then readjust if needed. Their rubber-coated case protects metal housings and control panels from scratches and adds friction for a tight grip. It also shields the magnets from cracks and chips caused by drops any bumps. With the highest strength-to-size ratio of any magnet, these deliver powerful pull force even in tight spaces.

Magnets With Threaded Hole


	Magnetized Through Thickness

Internally threaded for secure mounting with screws or bolts.

Steel Case—Maximizes holding power by concentrating magnetic force.

Zinc-Plated Steel Case—Withstands occasional exposure to moisture.

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

							Thread				Each
	Thk.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Direction of Magnetization	Cover Material	Size	Dp.	Color		1-49	50-Up
Steel Case



		13/16"	750	170	N48	Through Thickness	Rubber	M8 × 1 mm M6 × 1 mm	0.63" 0.63"	Black	7132T51	0000000	0000000


		Zinc-Plated Steel Case



				43/64"	157	170	N48	Through Thickness	Rubber	M6 × 1 mm	0.551"	Black	7132T41	000000	00000

Magnets With Threaded Stud

Screw into tapped holes for secure mounting that’s also removable.

Zinc-Plated Steel Case—Withstands occasional exposure to moisture.

										Each
	Thk., mm	Stud Lg., mm	Overall Ht., mm	Max. Pull, lbf	Max. Temp., ° F	Cover Material	Thread Size	Color		1-49	50-Up
Zinc-Plated Steel Case



		27.5	26	54	670	170	Rubber	M10 × 1.5 mm	Black	7132T55	0000000	0000000


		35	30	65	787	170	Rubber	M10 × 1.5 mm	Black	7132T56	000000	000000

Encased Samarium-Cobalt Disc Magnets

Smooth

Knurled


Magnetized Through Thickness	Magnetized Through Diameter

Keep these compact magnets safe and sound in temperatures up to 390° F. A built-in case shields them from cracks and chips caused by drops and bumps. All stand up to moisture and mild chemicals.

Nickel-Plated Iron Case—Concentrates and focuses the magnetic field to maximize holding strength. The nickel-plated finish adds a layer for corrosion resistance. However, the plating may wear off over time.

Brass Case—Concentrates and focuses the magnetic field to maximize holding strength. Softer than other metals, brass is less likely to scratch or damage surrounding components.

Zinc-Plated Steel Case—Withstands occasional exposure to moisture.

Knurled Surface—Get the best possible grip.

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

							Smooth Surface		Knurled Surface
	Thk.	OD	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Direction of Magnetization		Each		Each
Nickel-Plated Iron Case



		5/16"	25/64"	0.9	300	SmCo 28 (2:17)	Through Thickness	57325K81	000000	57325K22	000000


		5/16"	45/64"	9	300	SmCo 28 (2:17)	Through Thickness	57325K86	00000	57325K24	00000
		25/64"	63/64"	17	300	SmCo 28 (2:17)	Through Thickness	57325K93	00000	57325K26	00000


		Brass Case



				25/32"	15/64"	1.8	390	SmCo 16 (1:5)	Through Diameter	57325K11	0000	———	0


				25/32"	5/16"	4.8	390	SmCo 16 (1:5)	Through Diameter	57325K12	0000	———	0
				25/32"	25/64"	8.8	390	SmCo 16 (1:5)	Through Diameter	57325K13	00000	———	0
				25/32"	33/64"	13.2	390	SmCo 16 (1:5)	Through Diameter	57325K14	00000	———	0
				25/32"	5/8"	27.5	390	SmCo 16 (1:5)	Through Diameter	57325K15	00000	———	0
				63/64"	51/64"	50	390	SmCo 16 (1:5)	Through Diameter	57325K16	00000	———	0


				Zinc-Plated Steel Case



						11/64"	15/64"	1.1	390	SmCo 16 (1:5)	Through Thickness	57325K31	0000	———	0


						11/64"	5/16"	2.4	390	SmCo 16 (1:5)	Through Thickness	57325K32	00000	———	0
						11/64"	25/64"	4.4	390	SmCo 16 (1:5)	Through Thickness	57325K33	00000	———	0
						11/64"	33/64"	8.8	390	SmCo 16 (1:5)	Through Thickness	57325K34	00000	———	0
						11/64"	5/8"	13.2	390	SmCo 16 (1:5)	Through Thickness	57325K35	00000	———	0
						15/64"	51/64"	19.5	390	SmCo 16 (1:5)	Through Thickness	57325K36	00000	———	0

Multipole Neodymium Rectangle Magnets

Standard Magnets


	Magnetized Through Thickness

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

									Each
	Wd.	Lg.	Max. Pull, lbf	Sets of Poles	Max. Temp., ° F	Magnet Grade	Direction of Magnetization		1-49	50-Up
1/8" Thick



		1/2"	1/2"	13	5	180	N42	Through Thickness	2494N19	00000	00000


		1/2"	1"	17	11	180	N42	Through Thickness	2494N21	0000	0000
		1"	1"	40	25	180	N42	Through Thickness	2494N18	00000	0000
		1 1/2"	1 1/2"	86	45	180	N42	Through Thickness	2494N24	00000	00000


		3/16" Thick



				1"	1 1/2"	62	35	180	N35	Through Thickness	2494N22	00000	00000


				1"	1 1/2"	65	35	180	N42	Through Thickness	2494N23	00000	00000

Magnets With Adhesive Back


	Magnetized Through Thickness	Adhesive on South Pole

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

								Adhesive			Each
	Wd.	Lg.	Max. Pull, lbf	Sets of Poles	Max. Temp., ° F	Magnet Grade	Direction of Magnetization	Mfr.	Mfr. Model		1-49	50-Up
1/8" Thick



		1/2"	1/2"	13	5	180	N42	Through Thickness	3M	Very High Bond	2494N29	00000	00000


		1/2"	1"	17	11	180	N42	Through Thickness	3M	Very High Bond	2494N31	0000	0000
		1"	1"	40	25	180	N42	Through Thickness	3M	Very High Bond	2494N32	00000	00000
		1 1/2"	1 1/2"	86	45	180	N42	Through Thickness	3M	Very High Bond	2494N33	00000	00000


		3/16" Thick



				1"	1 1/2"	65	35	180	N42	Through Thickness	3M	Very High Bond	2494N34	00000	00000

Magnets With Unthreaded Hole


	Magnetized Through Thickness

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

												Each
	Wd.	Lg.	Hole Dia.	Max. Pull, lbf	Sets of Poles	Max. Temp., ° F	Magnet Grade	Direction of Magnetization	Mounting Hole Style	For Screw Size		1-49	50-Up
1/8" Thick



		1"	1"	0.0196"	26	21	180	N42	Through Thickness	Countersunk	No. 8	2494N53	000000	000000


		1"	1 1/2"	0.184"	45	31	180	N42	Through Thickness	Countersunk	No. 8	2494N44	00000	00000

Alnico Button Magnets

Clamp, hold, and position metal parts. These magnets have both north and south poles on the same face for strong, flush contact. A slot and mounting hole help you mount them in jigs and fixtures. Although not as strong as U-shaped magnets, button magnets have a flat base for stable clamping. They won’t melt, deform, or lose magnetic strength in temperatures up to 970° F.

Magnets With Unthreaded Hole

	Hole Dia.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Mounting Hole Style		Each
3/8" Thick



	1/2"	11/64"	1.5	970	Alnico 5	Straight	5688K51	00000


	1/2" Thick



			3/4"	3/16"	4	970	Alnico 5	Straight	5688K52	0000


			3/4"	7/32"	4	970	Alnico 5	Straight	5850K1	0000


			5/8" Thick



					1"	3/16"	7	970	Alnico 5	Straight	5688K53	0000


					3/4" Thick



							1 1/4"	3/16"	14	970	Alnico 5	Straight	5688K34	00000


							7/8" Thick



									1 1/2"	1/4"	18	970	Alnico 5	Straight	5688K35	00000


									1" Thick



											7/8"	1/4"	9	970	Alnico 5	Straight	5850K3	0000


											1 1/4"	9/32"	10	970	Alnico 5	Straight	5688K54	00000


											1 3/4" Thick



													1 1/2"	3/8"	35	970	Alnico 5	Straight	5850K7	00000

Nonmarring Neodymium Disc Magnets

Protect mounting surfaces while maintaining a strong grip. The rubber coating on these magnets prevents scratches and adds friction for a secure hold. Use them to mount sensors and tools on machinery or apply temporary signs to control panels. With the highest strength-to-size ratio of any magnet, these deliver powerful pull force even in tight spaces.

Standard Magnets


	Magnetized Through Thickness

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

									Each
	OD	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Direction of Magnetization	Cover Material	Choose a Color		1-49	50-Up
5/32" Thick



		3/4"	5	175	N48	Through Thickness	Rubber	Black, Green, Red, Yellow	2389N2	000000	00000


		3/16" Thick



				1"	8	175	N48	Through Thickness	Rubber	Black, Green, Red, Yellow	2389N4	00000	00000

Alnico Rotor Magnets

Achieve reliable rotation in motors, turbine generators, and other electromechanical systems. These magnets mount on shafts to create a uniform magnetic field around the axis. They won’t melt, deform, or lose magnetic strength in temperatures up to 970° F.

	Hole Dia.	Max. Pull, lbf	Max. Temp., ° F	Sets of Poles	Magnet Grade	Mounting Hole Style		Each
3/4" Thick



	1"	1/4"	16	970	2	Alnico 5	Straight	5850K2	000000


	1 1/4"	1/4"	25	970	3	Alnico 5	Straight	5850K4	00000


	7/8" Thick



			1 1/2"	3/8"	30	970	3	Alnico 5	Straight	5850K5	00000


			1 1/4" Thick



					2"	1/2"	75	970	4	Alnico 5	Straight	5850K29	00000

Encased Alnico Disc Magnets

Heat-resistant magnets that last. A built-in case shields them from cracks and chips caused by drops and bumps. These magnets won’t melt, deform, or lose magnetic strength in temperatures up to 420° F.

Magnets With Unthreaded Hole

Steel Case—Maximizes holding power by concentrating magnetic force.

	Max. Temp., ° F	Magnet Grade	For Screw Size		Each
Steel Case







	19/64" Thick

	3/4"	0.146"	6	420	Alnico 5	No. 6	56905K96	00000




			11/32" Thick

			1 1/8"	0.189"	11	420	Alnico 5	No. 8	56905K97	00000




					13/32" Thick

					1 1/2"	0.217"	28	420	Alnico 5	No. 10	56905K98	00000

Stepped Neodymium Disc Magnets

Prevent rotation and misalignment in your assemblies. The stepped profile locks components together with tongue-and-groove alignment for a secure, twist-proof hold. With the highest strength-to-size ratio of any magnet, these deliver powerful pull force even in tight spaces.

Press Fit Magnets


Stepped In	Stepped Out	Magnetized Through Thickness

Press magnets into drilled holes for flush mounting. Friction holds them in place, so there's no need for screws or adhesives.

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

		Stepped							Each
	OD	Dp.	Thk.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Direction of Magnetization		1-49	50-Up
Stepped In







				1/4" Thick

				1/2"	0.031"	0.094"	11	175	N45	Through Thickness	2463N107	00000	00000




						3/8" Thick

						3/4"	1/16"	1/8"	23	175	N45	Through Thickness	2463N108	00000	00000


						Stepped Out







										1/4" Thick

										1/2"	0.031"	0.094"	13	175	N45	Through Thickness	2463N109	0000	0000




												3/8" Thick

												3/4"	1/16"	0.188"	31	175	N45	Through Thickness	2463N11	00000	00000

Machinable Neodymium Rectangle Magnets

Cut, drill, or shape to your exact needs. These magnets are bonded with epoxy, making them soft enough to machine with carbide tooling while preserving their magnetic strength.

Standard Magnets


	Magnetized Through Thickness

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

								Each
	Wd.	Lg.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Direction of Magnetization		1-49	50-Up
5/64" Thick



		25/64"	1 31/32"	1.5	300	N10SH	Through Thickness	5903K67	000000	000000


		1 3/16"	1 3/16"	2	300	N10SH	Through Thickness	5903K64	00000	00000


		1/8" Thick



				1/2"	1/2"	1.6	180	N10	Through Thickness	5903K54	0000	0000


				1"	1"	3	180	N10	Through Thickness	5903K53	00000	0000


				0.15" Thick



						19/64"	13/16"	1.5	300	N10SH	Through Thickness	5903K62	0000	0000


						0.2" Thick



								0.2"	25/64"	1.1	300	N10SH	Through Thickness	5903K61	0000	0000


								25/64"	1 31/32"	3	300	N10SH	Through Thickness	5903K68	00000	00000
								1 3/16"	1 3/16"	4	300	N10SH	Through Thickness	5903K65	00000	00000


								1/4" Thick



										1/2"	1/2"	3	180	N10	Through Thickness	5903K55	00000	00000


										3/4"	3/4"	4	180	N10	Through Thickness	5903K56	00000	00000
										1"	1"	6	180	N10	Through Thickness	5903K51	00000	00000
										1 1/2"	1 1/2"	9	180	N10	Through Thickness	5903K57	00000	00000
										1 31/32"	1 31/32"	10	300	N10SH	Through Thickness	5903K72	00000	00000


										17/64" Thick



												19/64"	13/16"	2.8	300	N10SH	Through Thickness	5903K63	00000	00000


												3/8" Thick



														1"	1"	9	180	N10	Through Thickness	5903K52	00000	00000


25/64" Thick



														25/64"	1 31/32"	7	300	N10SH	Through Thickness	5903K69	00000	00000


														1 3/16"	1 3/16"	9	300	N10SH	Through Thickness	5903K66	00000	00000


														15/32" Thick



														25/64"	1 31/32"	8	300	N10SH	Through Thickness	5903K71	00000	00000


														1/2" Thick



				1 31/32"												1 31/32"	20	300	N10SH	Through Thickness	5903K73	000000	00000


				3/4" Thick



																1 31/32"	1 31/32"	30	300	N10SH	Through Thickness	5903K74	000000	000000


						1" Thick



																1 31/32"	1 31/32"	40	300	N10SH	Through Thickness	5903K75	000000	000000

Samarium-Cobalt Rectangle Magnets

Standard Magnets


	Magnetized Through Thickness

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

	Lg.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Direction of Magnetization		Each
0.1" Thick



	1/4"	1/4"	1	480	SmCo 20 (1:5)	Through Thickness	5715K32	00000


	1/4"	1/4"	1.5	570	SmCo 24 (2:17)	Through Thickness	5767K51	0000


	3/16" Thick



			1 1/2"	1"	18	570	SmCo 26 (2:17)	Through Thickness	5767K61	00000


			0.21" Thick



					1/2"	1/2"	5	480	SmCo 20 (1:5)	Through Thickness	5715K34	00000


					1/2"	1/2"	6	570	SmCo 24 (2:17)	Through Thickness	5767K52	00000


					0.32" Thick



							3/4"	3/4"	9	480	SmCo 20 (1:5)	Through Thickness	5715K36	00000


							3/4"	3/4"	10	570	SmCo 24 (2:17)	Through Thickness	5767K53	00000


							27/64" Thick



									1"	1"	16	480	SmCo 20 (1:5)	Through Thickness	5715K37	00000


									1"	1"	17	570	SmCo 24 (2:17)	Through Thickness	5767K54	00000


									1/2" Thick



											2"	1"	54	570	SmCo 26 (2:17)	Through Thickness	5767K62	00000


											2"	2"	65	480	SmCo 20 (1:5)	Through Thickness	5715K38	000000
											2"	2"	70	570	SmCo 24 (2:17)	Through Thickness	5767K56	000000

Alnico U-Channel Magnets

Mount flush in everything from tool holders to fixture plates. These magnets are encased in a channel that concentrates the magnetic field on one side, creating a strong hold on flat surfaces. They're also heat resistant, so they won’t melt, deform, or lose magnetic strength in temperatures up to 1020° F.

Standard Magnets


	Magnetized Through Length

Magnetized Through Length—Magnetized end to end, these magnets channel magnetic energy on the longest axis. This orientation creates deep field penetration and directional pull.

	U-Channel Wd.	Lg.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Direction of Magnetization		Each
5/16" Thick



	1/2"	3/16"	5"	11	1,020	Alnico 5	Through Length	5695K14	000000


	3/8" Thick



			5/8"	1/4"	5"	16	1,020	Alnico 5	Through Length	5695K16	00000


			1/2" Thick



					3/4"	1/4"	6"	34	1,020	Alnico 5	Through Length	5695K18	00000


					5/8" Thick



							1"	3/8"	6"	40	1,020	Alnico 5	Through Length	5695K22	000000


							3/4" Thick



									1 1/4"	7/16"	6"	60	1,020	Alnico 5	Through Length	5695K24	000000


									7/8" Thick



											1 1/2"	1/2"	6"	60	1,020	Alnico 5	Through Length	5695K26	000000

Stepped Neodymium Rectangle Magnets

Press Fit Magnets


Stepped In	Stepped Out	Magnetized Through Thickness

Press magnets into drilled holes for flush mounting. Friction holds them in place, so there's no need for screws or adhesives.

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

			Stepped							Each
	Wd.	Lg.	Dp.	Thk.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Direction of Magnetization		1-49	50-Up
Stepped In







				1/4" Thick

				1/2"	1/2"	0.047"	0.094"	15	175	N45	Through Thickness	2463N101	00000	00000


				1/2"	1"	0.047"	0.094"	21	175	N45	Through Thickness	2463N103	00000	00000


				Stepped Out







								1/4" Thick

								1/2"	1/2"	0.047"	0.094"	13	175	N45	Through Thickness	2463N104	0000	0000


								1/2"	3/4"	0.047"	0.094"	17	175	N45	Through Thickness	2463N105	00000	0000
								1/2"	1"	0.047"	0.094"	20	175	N45	Through Thickness	2463N106	00000	00000

Flexible Ceramic Disc Magnets


Magnetized Through Thickness	Magnetized Through Diameter

Stretch these nonconductive magnets over uneven surfaces where rigid magnets can’t grip. All are bonded to rubber for flexibility.

Standard Magnets

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

	Max. Pull, lbf	No. of Faces with Holding Power	Max. Temp., ° F	Direction of Magnetization	Pkg. Qty.		Pkg.
3/16" Thick



	3/4"	Not Rated	2	150	Through Thickness	8	58145K83	00000


	1"	0.6	2	150	Through Diameter	6	58145K85	0000

Encased Neodymium Rectangle Magnets with Polished Cover

Often chosen for their bright, polished appearance, these magnets offer more than good looks. All have a smooth cover that won’t trap dirt, grease, and grime. Plus, their case shields the magnet from cracks and chips caused by drops or bumps. With the highest strength-to-size ratio of any magnet, these deliver powerful pull force even in tight spaces. A striking plate is included.

Magnets With Unthreaded Hole

Image of Product. Front orientation. Magnets. Encased Neodymium Rectangle Magnets with Polished Cover.

Plastic Case—Lightweight, nonconductive, and naturally rust resistant.

											Brass Cover		Chrome-Plated Brass Cover		Nickel-Plated Brass Cover
	Thk.	Wd.	Lg.	Hole Dia.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	No. of Mounting Holes	For Screw Size	Includes		Each		Each		Each
Plastic Case



		0.65"	0.433"	1 21/32"	0.11"	11	180	N42	3	No. 2	Strike Plate	3506K31	000000	3506K32	000000	3506K33	000000

Twist Release Neodymium Disc Paired Magnets

Release magnetic holding force with a simple twist. These paired magnets lock together securely and disengage smoothly when rotated, eliminating the need for tools or latches. Use them in modular assemblies, sensor mounts, and quick-change systems where repeatable alignment and easy disassembly are key. With the highest strength-to-size ratio of any magnet, these deliver powerful pull force even in tight spaces. Also known as Polymagnets®.

Standard Magnets


	120° Release Increments	180° Release Increments

						Each
	OD	Max. Pull, lbf	Release Increments	Max. Temp., ° F		1-49	50-Up
1/8" Thick



		1"	15	120°	180	2518N111	000000	000000


		1"	19	180°	180	2518N121	00000	00000

Magnets With Adhesive Back


	120° Release Increments	180° Release Increments

					Adhesive			Each
	OD	Max. Pull, lbf	Release Increments	Max. Temp., ° F	Mfr.	Mfr. Model		1-49	50-Up
1/8" Thick



		1"	15	120°	180	3M	Very High Bond	2518N151	000000	000000


		1"	19	180°	180	3M	Very High Bond	2518N161	00000	00000

Magnets With Unthreaded Hole


	120° Release Increments	180° Release Increments

									Each
	OD	Hole Dia.	Max. Pull, lbf	Release Increments	Max. Temp., ° F	Mounting Hole Style	For Screw Size		1-49	50-Up
1/8" Thick



		1"	0.19"	12	120°	180	Countersunk	No. 8	2518N131	000000	000000


		1"	0.19"	14	180°	180	Countersunk	No. 8	2518N141	00000	00000

Multiposition Neodymium Disc Paired Magnets

Snap and lock parts at multiple positions. These magnets have more than one fixed alignment. They’re magnetized in a circular pattern with alternating north and south poles, so they snap together at specific increments. Use them in fixtures, inspection stations, and laser-alignment systems to reposition parts without mechanical detents. With the highest strength-to-size ratio of any magnet, these deliver powerful pull force even in tight spaces. Also known as Polymagnets®.

Standard Magnets


	90° Rotation Increments	120° Rotation Increments

							Each
	OD	Max. Pull, lbf	Rotation Increments	Max. Temp., ° F	Magnet Grade		1-49	50-Up
1/8" Thick



		1"	16	90°	180	N42	2519N222	000000	000000


		1"	20	120°	180	N42	2519N232	00000	00000

Magnets With Adhesive Back


	90° Rotation Increments	120° Rotation Increments

						Adhesive			Each
	OD	Max. Pull, lbf	Rotation Increments	Max. Temp., ° F	Magnet Grade	Mfr.	Mfr. Model		1-49	50-Up
1/8" Thick



		1"	16	90°	180	N42	3M	Very High Bond	2519N262	000000	000000


		1"	20	120°	180	N42	3M	Very High Bond	2519N272	00000	00000

Magnets With Unthreaded Hole


	90° Rotation Increments	120° Rotation Increments

										Each
	OD	Hole Dia.	Max. Pull, lbf	Rotation Increments	Max. Temp., ° F	Magnet Grade	Mounting Hole Style	For Screw Size		1-49	50-Up
1/8" Thick



		1"	0.19"	12	90°	180	N42	Countersunk	No. 8	2519N242	000000	000000


		1"	0.19"	16	120°	180	N42	Countersunk	No. 8	2519N252	00000	00000

Nonmarring Encased Ceramic Rectangle Magnets

These safeguarded, economical magnets grip surfaces without marking them. The rubber-coated case protects metal housings and control panels from scratches and adds friction for a tight grip. It also shields the magnet from the elements as well as cracks and chips caused by drops and bumps. Ceramic magnets deliver a cost-effective balance of corrosion and temperature resistance. However, they are not as strong as rare earth magnets.

Standard Magnets

Plastic Case—Lightweight, nonconductive, and naturally rust resistant.

	Wd.	Lg.	Max. Pull, lbf	Max. Temp., ° F	Sets of Poles	Magnet Grade		Each
Plastic Case



	15/64"	51/64"	1 49/64"	5	175	2	C8	57005K95	00000


	15/64"	51/64"	2 23/64"	6	175	2	C8	57005K96	0000

Nonmarring Encased Ceramic Disc Magnets

Plastic Case—Lightweight, nonconductive, and naturally rust resistant.

	Thk.	OD	Max. Pull, lbf	Max. Temp., ° F	Sets of Poles	Magnet Grade		Each
Plastic Case



	1	15/64"	1"	2.8	175	1	C8	57005K84	00000


	2	29/64"	1 1/2"	6	175	1	C8	57005K85	0000