5862K13 | Neodymium Magnet

Filter by

Shape

System of Measurement

Thickness

Direction of Magnetization

Mount Type

Maximum Pull

Magnetic Pull Rating

Magnet Grade

Length

Width

Thread Size

Material

Finish

Hole Diameter

Screw Size

Mounting Hole Style

Maximum Temperature

Performance

Electrically Insulating

Color

Flux Density

RoHS

Compliant with Exemptions

REACH

Compliant

Not Compliant

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

Compliant

Exempt

Not Compliant

Export Control Classification Number (ECCN)

1,428 Products

About Magnets

Choose a magnet with the right strength, material, and temperature resistance for your application.

Neodymium Disc Magnets

Unmatched strength in a compact shape. These magnets have the highest strength-to-size ratio of any magnet, delivering powerful pull force even in tight spaces. Their flat, round shape creates a strong, even pull across surfaces for reliable holding power. However, they may lose magnetic strength at high temperatures. Also known as rare earth magnets.

Warning: Maximum pull ratings are based on direct contact with rust-free, unpainted iron surfaces. Variations in material condition will significantly reduce these ratings. Do not use for lifting over people.

Standard Magnets


Magnetized Through Thickness	Magnetized Through Diameter

N35SH and N38SH—These magnets are less likely than other grades to lose magnetic strength when exposed to temperatures up to 300°F.

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

Magnetized Through Diameter—Magnetized outward from the center, these magnets generate a circular magnetic field. This makes them best for sensors and motors where rotational symmetry and precise angles are key.

Nickel Plated—With a nickel-plated finish, these magnets stand up to solvents, salt water, and chemicals better than uncoated neodymium. The plating may wear off over time, so these are not recommended for applications with a lot of friction or wear.

Uncoated—Apply whatever finish best guards against rust and wear in your environment. If left uncoated, expect corrosion and less durability.

								Each
	OD	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Direction of Magnetization	Finish		1-49	50-Up
0.04" Thick



		0.1"	0.2	130	N52	Through Thickness	Nickel Plated	5862K425	00000	00000


		0.1"	0.3	300	N38SH	Through Thickness	Nickel Plated	5862K74	0000	0000
		1/8"	0.3	175	N52	Through Thickness	Nickel Plated	5862K401	0000	0000
		1/8"	0.4	300	N38SH	Through Thickness	Nickel Plated	5862K77	0000	0000
		5/32"	0.4	175	N52	Through Thickness	Nickel Plated	5862K402	0000	0000
		5/32"	0.7	300	N35SH	Through Thickness	Nickel Plated	5862K23	0000	0000


		1/16" Thick



				1/16"	0.1	175	N52	Through Thickness	Nickel Plated	5862K137	0000	0000


				1/16"	0.9	175	N52	Through Diameter	Nickel Plated	5862K409	0000	0000
				5/64"	0.2	175	N52	Through Thickness	Nickel Plated	5862K403	0000	0000
				5/64"	0.4	300	N38SH	Through Thickness	Nickel Plated	5862K72	0000	0000
				0.1"	0.4	130	N52	Through Thickness	Nickel Plated	5862K426	0000	0000
				0.1"	0.5	300	N38SH	Through Thickness	Nickel Plated	5862K75	0000	0000
				0.118"	0.5	300	N35SH	Through Thickness	Nickel Plated	5862K21	0000	0000
				1/8"	0.33	175	N52	Through Diameter	Nickel Plated	5862K411	0000	0000
				1/8"	0.5	175	N52	Through Thickness	Nickel Plated	5862K138	0000	0000
				1/8"	0.6	300	N35SH	Through Thickness	Nickel Plated	5862K13	0000	0000
				Neodymium Magnet, High-Temperature, 0.06" Thick, 1/8" OD Product Detail QuantityEachIn stock Select a compatible file type: Parasolid
				3/16"	0.38	175	N52	Through Diameter	Nickel Plated	5862K412	0000	0000


				3/16"	0.9	170	N35	Through Thickness	Uncoated	5862K962	0000	0000
				3/16"	0.9	175	N52	Through Thickness	Nickel Plated	5862K139	0000	0000
				1/4"	0.54	175	N52	Through Diameter	Nickel Plated	5862K413	0000	0000
				1/4"	1.3	300	N38SH	Through Thickness	Nickel Plated	5862K79	0000	0000
				1/4"	1.4	175	N52	Through Thickness	Nickel Plated	5862K141	0000	0000
				5/16"	2	175	N52	Through Thickness	Nickel Plated	5862K142	0000	0000
				5/16"	2.1	130	N52	Through Diameter	Nickel Plated	5862K429	0000	0000
				3/8"	0.63	175	N52	Through Diameter	Nickel Plated	5862K414	0000	0000
				3/8"	1.5	300	N35SH	Through Thickness	Uncoated	5862K46	0000	0000
				3/8"	2.6	175	N52	Through Thickness	Nickel Plated	5862K143	0000	0000


				7/16"	3.1	175	N52	Through Thickness	Nickel Plated	5862K144	0000	0000
				1/2"	1.2	300	N35SH	Through Thickness	Uncoated	5862K48	0000	0000
				1/2"	3.8	175	N52	Through Thickness	Nickel Plated	5862K145	0000	0000
				1/2"	3.9	130	N52	Through Diameter	Nickel Plated	5862K431	0000	0000
				9/16"	4.3	175	N52	Through Thickness	Nickel Plated	5862K146	0000	0000
				5/8"	4.9	175	N52	Through Thickness	Nickel Plated	5862K147	0000	0000
				11/16"	6	175	N52	Through Thickness	Nickel Plated	5862K148	0000	0000
				3/4"	3	300	N38SH	Through Thickness	Nickel Plated	5862K892	0000	0000
				3/4"	6	175	N52	Through Thickness	Nickel Plated	5862K149	0000	0000
				13/16"	6	175	N52	Through Thickness	Nickel Plated	5862K151	0000	0000


				7/8"	7	175	N52	Through Thickness	Nickel Plated	5862K152	0000	0000
				15/16"	8	175	N52	Through Thickness	Nickel Plated	5862K153	0000	0000
				1"	8	175	N52	Through Thickness	Nickel Plated	5862K154	0000	0000


				0.08" Thick



	5/16"				2.5	175	N52	Through Thickness	Nickel Plated	5862K404	0000	0000


	0.32"				2.2	300	N38SH	Through Thickness	Nickel Plated	5862K83	0000	0000


	0.1" Thick



						1/8"	0.7	175	N52	Through Thickness	Nickel Plated	5862K405	0000	0000


		1/8"				0.7	300	N35SH	Through Thickness	Nickel Plated	5862K25	0000	0000
		1/8"	0.7			300	N35SH	Through Thickness	Uncoated	5862K24	0000	0000
		1/4"	1.8			300	N35SH	Through Thickness	Nickel Plated	58605K31	0000	0000
		1/4"	1.8			300	N35SH	Through Thickness	Uncoated	5862K52	0000	0000
		1/4"	2.1			175	N52	Through Thickness	Nickel Plated	5862K406	0000	0000
		3/8"	2.8			300	N35SH	Through Thickness	Nickel Plated	5862K27	0000	0000
		3/8"	2.8			300	N35SH	Through Thickness	Uncoated	5862K26	0000	0000
		3/8"	3.8			175	N52	Through Thickness	Nickel Plated	5862K407	0000	0000
		3/4"	5			300	N35SH	Through Thickness	Nickel Plated	5862K31	00000	0000
		3/4"	5			300	N35SH	Through Thickness	Uncoated	5862K3	00000	00000


		3/4"	9			175	N52	Through Thickness	Nickel Plated	5862K408	0000	0000


		1/8" Thick



						1/16"	0.1	175	N45	Through Diameter	Nickel Plated	5862K201	0000	0000


						1/16"	0.1	175	N52	Through Thickness	Nickel Plated	5862K155	0000	0000
						1/16"	0.6	300	N35SH	Through Thickness	Nickel Plated	5862K11	0000	0000
						1/8"	0.7	175	N45	Through Diameter	Nickel Plated	5862K202	0000	0000
						1/8"	0.7	300	N35SH	Through Thickness	Nickel Plated	5862K61	0000	0000
						1/8"	0.7	300	N35SH	Through Thickness	Uncoated	5862K51	0000	0000
						1/8"	0.8	175	N52	Through Thickness	Nickel Plated	5862K101	0000	0000
						3/16"	0.87	175	N52	Through Diameter	Nickel Plated	5862K415	0000	0000
						3/16"	1.6	175	N52	Through Thickness	Nickel Plated	5862K102	0000	0000
						1/4"	2.1	300	N35SH	Through Thickness	Nickel Plated	58605K33	0000	0000
						1/4"	2.5	175	N45	Through Diameter	Nickel Plated	5862K203	0000	0000


						1/4"	2.8	175	N52	Through Thickness	Nickel Plated	5862K103	0000	0000
						5/16"	1.57	175	N52	Through Diameter	Nickel Plated	5862K416	0000	0000
						5/16"	4.1	175	N52	Through Thickness	Nickel Plated	5862K156	0000	0000
						3/8"	3	300	N35SH	Through Thickness	Nickel Plated	5862K96	0000	0000
						3/8"	3	300	N35SH	Through Thickness	Uncoated	5862K95	0000	0000
						3/8"	4.7	175	N45	Through Diameter	Nickel Plated	5862K204	0000	0000
						3/8"	5	175	N52	Through Thickness	Nickel Plated	5862K104	0000	0000
						7/16"	7	175	N52	Through Thickness	Nickel Plated	5862K157	0000	0000
						1/2"	4	170	N35	Through Thickness	Uncoated	5862K971	0000	0000
						1/2"	7	175	N45	Through Diameter	Nickel Plated	5862K205	0000	0000


						1/2"	8	175	N52	Through Thickness	Nickel Plated	5862K105	0000	0000
						9/16"	9	175	N52	Through Thickness	Nickel Plated	5862K158	0000	0000
						5/8"	9	175	N45	Through Diameter	Nickel Plated	5862K206	0000	0000
5/8"						10	175	N52	Through Thickness	Nickel Plated	5862K159	0000	0000
5/8"				10		300	N38SH	Through Thickness	Nickel Plated	5862K86	0000	0000
11/16"				11		175	N52	Through Thickness	Nickel Plated	5862K161	0000	0000
3/4"				8		300	N38SH	Through Thickness	Nickel Plated	5862K893	00000	0000
3/4"				11		175	N45	Through Diameter	Nickel Plated	5862K207	0000	0000
3/4"				12		175	N52	Through Thickness	Nickel Plated	5862K106	0000	0000
13/16"				13		175	N52	Through Thickness	Nickel Plated	5862K162	0000	0000


7/8"	9			300		N38SH	Through Thickness	Nickel Plated	5862K896	00000	00000
7/8"	12			175		N45	Through Diameter	Nickel Plated	5862K208	00000	0000
7/8"	14			175	N52	Through Thickness	Nickel Plated	5862K163	0000	0000
15/16"	15			175	N52	Through Thickness	Nickel Plated	5862K164	0000	0000
1"	10			300	N35SH	Through Thickness	Nickel Plated	58605K83	00000	00000
1"	10			300	N35SH	Through Thickness	Uncoated	58605K43	00000	00000
1"	14			175	N45	Through Diameter	Nickel Plated	5862K209	00000	0000
1"	16			175	N52	Through Thickness	Nickel Plated	5862K107	0000	0000
1 1/8"	18			175	N52	Through Thickness	Nickel Plated	5862K258	00000	0000
1 1/4"	20			175	N52	Through Thickness	Nickel Plated	5862K259	00000	00000


1 3/8"	23			175	N52	Through Thickness	Nickel Plated	5862K261	00000	00000
1 1/2"	25			175	N52	Through Thickness	Nickel Plated	5862K262	00000	00000
1 3/4"	30			175	N52	Through Thickness	Nickel Plated	5862K264	00000	00000
1 7/8"	33			175	N52	Through Thickness	Nickel Plated	5862K265	00000	00000
2"	19			300	N35SH	Through Thickness	Nickel Plated	5862K41	00000	00000
2"	19			300	N35SH	Through Thickness	Uncoated	5862K4	00000	00000
2"	35			175	N52	Through Thickness	Nickel Plated	5862K266	00000	00000
2 1/4"	40			175	N52	Through Thickness	Nickel Plated	5862K267	00000	00000
2 1/2"	44			175	N52	Through Thickness	Nickel Plated	5862K268	00000	00000
2 3/4"	48			175	N52	Through Thickness	Nickel Plated	5862K269	00000	00000

3"	50	175	N52	Through Thickness	Nickel Plated	5862K271	000000	00000

3/16" Thick



		1/16"	0.1	175	N52	Through Thickness	Nickel Plated	5862K165	0000	0000


		1/8"	0.67	175	N52	Through Diameter	Nickel Plated	5862K417	0000	0000
		1/8"	0.9	175	N52	Through Thickness	Nickel Plated	5862K166	0000	0000
		3/16"	1.35	175	N52	Through Diameter	Nickel Plated	5862K418	0000	0000
		3/16"	2.2	175	N52	Through Thickness	Nickel Plated	5862K108	0000	0000
		1/4"	1.94	175	N52	Through Diameter	Nickel Plated	5862K419	0000	0000
		1/4"	3.7	175	N52	Through Thickness	Nickel Plated	5862K109	0000	0000
		5/16"	5	175	N52	Through Thickness	Nickel Plated	5862K167	0000	0000
		3/8"	2.8	175	N52	Through Diameter	Nickel Plated	5862K421	0000	0000
		3/8"	7	175	N52	Through Thickness	Nickel Plated	5862K111	0000	0000
		7/16"	9	175	N52	Through Thickness	Nickel Plated	5862K168	0000	0000


		1/2"	3.37	175	N52	Through Diameter	Nickel Plated	5862K422	0000	0000
		1/2"	5	300	N35SH	Through Thickness	Nickel Plated	5862K63	00000	0000
		1/2"	5	300	N35SH	Through Thickness	Uncoated	5862K53	00000	0000
		1/2"	11	175	N52	Through Thickness	Nickel Plated	5862K112	0000	0000
		9/16"	13	175	N52	Through Thickness	Nickel Plated	5862K169	0000	0000
		5/8"	16	175	N52	Through Thickness	Nickel Plated	5862K171	0000	0000
		11/16"	17	175	N52	Through Thickness	Nickel Plated	5862K172	0000	0000
		3/4"	10	170	N35	Through Thickness	Uncoated	5862K973	00000	00000
		3/4"	19	175	N52	Through Thickness	Nickel Plated	5862K173	0000	0000
		13/16"	22	175	N52	Through Thickness	Nickel Plated	5862K174	0000	0000


		7/8"	24	175	N52	Through Thickness	Nickel Plated	5862K175	0000	0000
		15/16"	26	175	N52	Through Thickness	Nickel Plated	5862K176	0000	0000
		1"	28	175	N52	Through Thickness	Nickel Plated	5862K113	0000	0000
		1 1/8"	31	175	N52	Through Thickness	Nickel Plated	5862K272	00000	00000
		1 1/4"	33	175	N52	Through Thickness	Nickel Plated	5862K273	00000	00000
		1 3/8"	36	175	N52	Through Thickness	Nickel Plated	5862K274	00000	00000
		1 1/2"	36	175	N52	Through Thickness	Nickel Plated	5862K275	00000	00000
		1 5/8"	39	175	N52	Through Thickness	Nickel Plated	5862K276	00000	00000
		1 3/4"	40	175	N52	Through Thickness	Nickel Plated	5862K277	00000	00000
		1 7/8"	43	175	N52	Through Thickness	Nickel Plated	5862K278	00000	00000


		2"	45	175	N52	Through Thickness	Nickel Plated	5862K279	00000	00000


		1/4" Thick



				1/16"	0.1	175	N52	Through Thickness	Nickel Plated	5862K177	0000	0000


				1/16"	0.2	175	N45	Through Diameter	Nickel Plated	5862K211	0000	0000
				1/8"	0.9	175	N45	Through Diameter	Nickel Plated	5862K212	0000	0000
				1/8"	1	175	N52	Through Thickness	Nickel Plated	5862K114	0000	0000
				3/16"	1.8	175	N52	Through Diameter	Nickel Plated	5862K423	0000	0000
				3/16"	2.4	175	N52	Through Thickness	Nickel Plated	5862K115	0000	0000
				3/16"	3	170	N35	Through Thickness	Uncoated	5862K964	0000	0000
				1/4"	2.5	300	N35SH	Through Thickness	Nickel Plated	58605K75	0000	0000
				1/4"	2.5	300	N35SH	Through Thickness	Uncoated	58605K35	0000	0000
				1/4"	3.6	175	N45	Through Diameter	Nickel Plated	5862K213	0000	0000
				1/4"	4.1	175	N52	Through Thickness	Nickel Plated	5862K116	0000	0000


5/16"				6	175	N52	Through Thickness	Nickel Plated	5862K178	0000	0000
0.32"	4			300	N35SH	Through Thickness	Uncoated	5862K44	0000	0000
3/8"	5			300	N35SH	Through Thickness	Nickel Plated	5862K65	0000	0000
3/8"	5			300	N35SH	Through Thickness	Uncoated	5862K55	0000	0000
3/8"	7			175	N45	Through Diameter	Nickel Plated	5862K214	0000	0000
3/8"	8			175	N52	Through Thickness	Nickel Plated	5862K117	0000	0000
7/16"	11			175	N52	Through Thickness	Nickel Plated	5862K179	0000	0000
1/2"	7			300	N35SH	Through Thickness	Nickel Plated	58605K77	00000	00000
1/2"	7			300	N35SH	Through Thickness	Uncoated	58605K37	00000	00000
1/2"	12			175	N45	Through Diameter	Nickel Plated	5862K215	0000	0000


1/2"	13			175	N52	Through Thickness	Nickel Plated	5862K118	0000	0000
9/16"	16			175	N52	Through Thickness	Nickel Plated	5862K181	0000	0000
5/8"	13			300	N38SH	Through Thickness	Nickel Plated	5862K87	00000	00000
5/8"	16			175	N45	Through Diameter	Nickel Plated	5862K216	00000	0000
5/8"	19			175	N52	Through Thickness	Nickel Plated	5862K119	0000	0000
11/16"	21			175	N52	Through Thickness	Nickel Plated	5862K182	0000	0000
3/4"	14			300	N35SH	Through Thickness	Nickel Plated	5862K92	00000	00000
3/4"	14			300	N35SH	Through Thickness	Uncoated	5862K91	00000	00000
3/4"	20			175	N45	Through Diameter	Nickel Plated	5862K217	00000	0000
3/4"	23			175	N52	Through Thickness	Nickel Plated	5862K121	0000	0000


13/16"	22			175	N52	Through Thickness	Nickel Plated	5862K281	00000	00000
7/8"	19			300	N38SH	Through Thickness	Nickel Plated	5862K897	00000	00000
7/8"	22			175	N52	Through Thickness	Nickel Plated	5862K252	00000	0000
7/8"	25			175	N45	Through Diameter	Nickel Plated	5862K218	00000	00000
15/16"	31			175	N52	Through Thickness	Nickel Plated	5862K282	00000	00000
1"	14			300	N35SH	Through Thickness	Uncoated	58605K45	00000	00000
1"	19			300	N35SH	Through Thickness	Nickel Plated	58605K85	00000	00000
1"	29			175	N45	Through Diameter	Nickel Plated	5862K219	00000	00000
1"	38			175	N52	Through Thickness	Nickel Plated	5862K253	00000	00000
1 1/8"	37			175	N52	Through Thickness	Nickel Plated	5862K283	00000	00000


1 1/4"	38			175	N52	Through Thickness	Nickel Plated	5862K284	00000	00000
1 3/8"	40			175	N52	Through Thickness	Nickel Plated	5862K285	00000	00000
1 1/2"	29			300	N35SH	Through Thickness	Nickel Plated	5862K15	00000	00000
1 1/2"	42			175	N52	Through Thickness	Nickel Plated	5862K286	00000	00000
1 5/8"	45			175	N52	Through Thickness	Nickel Plated	5862K287	00000	00000
1 3/4"	50			175	N52	Through Thickness	Nickel Plated	5862K288	00000	00000
1 7/8"	53			175	N52	Through Thickness	Nickel Plated	5862K289	00000	00000
2"	35			300	N35SH	Through Thickness	Nickel Plated	5862K43	000000	00000
2"	35			300	N35SH	Through Thickness	Uncoated	5862K42	000000	00000
2"	55			175	N52	Through Thickness	Nickel Plated	5862K291	00000	00000

2 1/4"	61	175	N52	Through Thickness	Nickel Plated	5862K292	00000	00000
2 3/4"	74	175	N52	Through Thickness	Nickel Plated	5862K294	000000	00000
3"	50	300	N35SH	Through Thickness	Nickel Plated	58605K87	000000	000000
3"	50	300	N35SH	Through Thickness	Uncoated	58605K47	000000	000000
3"	81	175	N52	Through Thickness	Nickel Plated	5862K295	000000	000000

3/8" Thick



		1/16"	0.2	175	N52	Through Thickness	Nickel Plated	5862K183	0000	0000


		1/8"	1	175	N52	Through Thickness	Nickel Plated	5862K122	0000	0000
		1/8"	1.1	130	N52	Through Diameter	Nickel Plated	5862K432	0000	0000
		3/16"	2.4	175	N52	Through Thickness	Nickel Plated	5862K184	0000	0000
		3/16"	2.5	130	N52	Through Diameter	Nickel Plated	5862K433	0000	0000
		1/4"	3.73	175	N52	Through Diameter	Nickel Plated	5862K424	0000	0000
		1/4"	4.4	175	N52	Through Thickness	Nickel Plated	5862K185	0000	0000
		5/16"	7	175	N52	Through Thickness	Nickel Plated	5862K186	0000	0000
		3/8"	10	170	N35	Through Thickness	Uncoated	5862K966	00000	00000
		3/8"	10	175	N52	Through Thickness	Nickel Plated	5862K123	0000	0000
		7/16"	13	175	N52	Through Thickness	Nickel Plated	5862K187	0000	0000


		1/2"	14	300	N35SH	Through Thickness	Nickel Plated	5862K94	00000	00000
		1/2"	14	300	N35SH	Through Thickness	Uncoated	5862K93	00000	00000
		1/2"	17	175	N52	Through Thickness	Nickel Plated	5862K124	0000	0000
		9/16"	20	175	N52	Through Thickness	Nickel Plated	5862K296	00000	0000
		5/8"	24	175	N52	Through Thickness	Nickel Plated	5862K297	0000	0000
		11/16"	27	175	N52	Through Thickness	Nickel Plated	5862K298	00000	0000
		3/4"	30	175	N52	Through Thickness	Nickel Plated	5862K299	00000	0000
		13/16"	35	175	N52	Through Thickness	Nickel Plated	5862K301	00000	00000
		7/8"	15	300	N35SH	Through Thickness	Uncoated	58605K41	00000	00000
		7/8"	39	175	N52	Through Thickness	Nickel Plated	5862K302	00000	00000


		15/16"	43	175	N52	Through Thickness	Nickel Plated	5862K303	00000	00000
		1"	47	175	N52	Through Thickness	Nickel Plated	5862K304	00000	00000
		1 1/8"	53	175	N52	Through Thickness	Nickel Plated	5862K305	00000	00000
		1 1/4"	60	175	N52	Through Thickness	Nickel Plated	5862K306	00000	00000
		1 3/8"	66	175	N52	Through Thickness	Nickel Plated	5862K307	00000	00000
		1 1/2"	40	300	N35SH	Through Thickness	Nickel Plated	5862K17	00000	00000
		1 1/2"	72	175	N52	Through Thickness	Nickel Plated	5862K308	00000	00000
		1 5/8"	67	175	N52	Through Thickness	Nickel Plated	5862K309	00000	00000
		1 7/8"	96	175	N52	Through Thickness	Nickel Plated	5862K312	00000	00000
		2"	97	175	N52	Through Thickness	Nickel Plated	5862K313	00000	00000


		1/2" Thick



				1/16"	0.2	175	N52	Through Thickness	Nickel Plated	5862K188	0000	0000


				1/8"	1	175	N52	Through Thickness	Nickel Plated	5862K125	0000	0000
				3/16"	2.5	175	N52	Through Thickness	Nickel Plated	5862K126	0000	0000
				1/4"	4.7	175	N52	Through Thickness	Nickel Plated	5862K127	0000	0000
				5/16"	8	175	N52	Through Thickness	Nickel Plated	5862K189	0000	0000
				3/8"	11	175	N52	Through Thickness	Nickel Plated	5862K128	0000	0000
				7/16"	14	175	N52	Through Thickness	Nickel Plated	5862K191	0000	0000
				1/2"	18	175	N52	Through Thickness	Nickel Plated	5862K129	0000	0000
				1/2"	19	300	N35SH	Through Thickness	Nickel Plated	5862K29	00000	00000
				1/2"	19	300	N35SH	Through Thickness	Uncoated	5862K28	00000	00000
				9/16"	23	175	N52	Through Thickness	Nickel Plated	5862K314	00000	00000


				5/8"	24	175	N52	Through Thickness	Nickel Plated	5862K254	00000	00000
				5/8"	27	300	N38SH	Through Thickness	Nickel Plated	5862K88	00000	00000
				11/16"	31	175	N52	Through Thickness	Nickel Plated	5862K315	00000	00000
3/4"				28	300	N35SH	Through Thickness	Nickel Plated	5862K33	00000	00000
3/4"	28			300	N35SH	Through Thickness	Uncoated	5862K32	00000	00000
3/4"	36			175	N52	Through Thickness	Nickel Plated	5862K255	00000	00000
13/16"	40			175	N52	Through Thickness	Nickel Plated	5862K316	00000	00000
7/8"	39			175	N52	Through Thickness	Nickel Plated	5862K256	00000	00000
15/16"	50			175	N52	Through Thickness	Nickel Plated	5862K317	00000	00000
1"	35			300	N35SH	Through Thickness	Nickel Plated	5862K39	000000	00000


1"	35			300	N35SH	Through Thickness	Uncoated	5862K38	000000	00000
1"	54			175	N52	Through Thickness	Nickel Plated	5862K257	00000	00000
1 1/8"	67			175	N52	Through Thickness	Nickel Plated	5862K318	00000	00000
1 1/4"	76			175	N52	Through Thickness	Nickel Plated	5862K319	00000	00000
1 3/8"	84			175	N52	Through Thickness	Nickel Plated	5862K321	00000	00000
1 1/2"	55			300	N35SH	Through Thickness	Nickel Plated	5862K19	000000	00000
1 1/2"	89			175	N52	Through Thickness	Nickel Plated	5862K322	00000	00000
1 5/8"	98			175	N52	Through Thickness	Nickel Plated	5862K323	00000	00000
1 3/4"	105			175	N52	Through Thickness	Nickel Plated	5862K324	00000	00000
1 7/8"	111			175	N52	Through Thickness	Nickel Plated	5862K325	000000	00000


2"	130			175	N52	Through Thickness	Nickel Plated	5862K326	000000	00000
2 1/2"	157			175	N52	Through Thickness	Nickel Plated	5862K328	000000	000000
2 3/4"	171			175	N52	Through Thickness	Nickel Plated	5862K329	000000	000000
3"	184			175	N52	Through Thickness	Nickel Plated	5862K331	000000	000000


3/4" Thick



				1/4"	5	175	N52	Through Thickness	Nickel Plated	5862K131	0000	0000


				3/8"	11	175	N52	Through Thickness	Nickel Plated	5862K192	0000	0000
				1/2"	19	175	N52	Through Thickness	Nickel Plated	5862K132	0000	0000
				1/2"	32	300	N38SH	Through Thickness	Nickel Plated	5862K84	00000	0000
				5/8"	31	175	N52	Through Thickness	Nickel Plated	5862K332	00000	00000
				3/4"	40	175	N52	Through Thickness	Nickel Plated	5862K333	00000	00000
				1"	69	175	N52	Through Thickness	Nickel Plated	5862K335	00000	00000
				1 1/2"	115	175	N52	Through Thickness	Nickel Plated	5862K336	000000	00000
				3"	353	175	N52	Through Thickness	Nickel Plated	5862K339	000000	000000


		1" Thick



				1/4"	5	175	N52	Through Thickness	Nickel Plated	5862K133	0000	0000


				3/8"	11	175	N52	Through Thickness	Nickel Plated	5862K134	0000	0000
				3/8"	29	170	N35	Through Thickness	Uncoated	5862K968	00000	00000
				1/2"	21	175	N52	Through Thickness	Nickel Plated	5862K135	00000	0000
				5/8"	33	175	N52	Through Thickness	Nickel Plated	5862K341	00000	00000
				3/4"	45	175	N52	Through Thickness	Nickel Plated	5862K342	00000	00000
				7/8"	58	175	N52	Through Thickness	Nickel Plated	5862K343	00000	00000
				1"	76	175	N52	Through Thickness	Nickel Plated	5862K344	00000	00000
				1 1/2"	150	175	N52	Through Thickness	Nickel Plated	5862K136	00000	00000
				2"	258	175	N52	Through Thickness	Nickel Plated	5862K193	000000	00000
				2 1/2"	376	175	N52	Through Thickness	Nickel Plated	5862K194	000000	000000


				3"	495	175	N52	Through Thickness	Nickel Plated	5862K195	000000	000000


				2" Thick



						19/64"	7	130	N52	Through Thickness	Nickel Plated	5862K427	00000	00000


						4" Thick



								1/4"	5	130	N52	Through Thickness	Nickel Plated	5862K428	00000	00000

Magnets With Adhesive Back


	Magnetized Through Thickness	Adhesive on North Pole	Adhesive on South Pole

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

										North Pole			South Pole
						Adhesive					Each			Each
	OD	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Direction of Magnetization	Material	Mfr.	Mfr. Model	Finish		1-49	50-Up		1-49	50-Up
1/16" Thick



		3/16"	0.9	170	N35	Through Thickness	Acrylic Plastic	—	—	Nickel Plated	7048T37	00000	00000	7048T38	00000	00000


		3/8"	2.5	175	N52	Through Thickness	—	3M	Very High Bond	Nickel Plated	7048T65	0000	0000	7048T59	0000	0000
		1/2"	3.4	170	N45	Through Thickness	—	3M	Very High Bond	Nickel Plated	7048T15	0000	0000	7048T16	0000	0000
		1/2"	3.6	175	N52	Through Thickness	—	3M	Very High Bond	Nickel Plated	7048T56	0000	0000	7048T61	0000	0000
		3/4"	4.5	170	N45	Through Thickness	—	3M	Very High Bond	Nickel Plated	7048T17	0000	0000	7048T18	0000	0000
		3/4"	6	175	N52	Through Thickness	—	3M	Very High Bond	Nickel Plated	7048T57	0000	0000	7048T62	0000	0000


		0.08" Thick



				1"	6	170	N35	Through Thickness	—	3M	Very High Bond	Nickel Plated	7048T19	00000	0000	7048T21	00000	0000


				1"	11	175	N52	Through Thickness	—	3M	Very High Bond	Nickel Plated	7048T58	0000	0000	7048T63	0000	0000


				0.1" Thick



						1/4"	1.9	170	N35	Through Thickness	Acrylic Plastic	—	—	Nickel Plated	7048T35	0000	0000	7048T36	0000	0000


						3/8"	2.9	170	N35	Through Thickness	Acrylic Plastic	—	—	Nickel Plated	7048T42	0000	0000	7048T43	0000	0000
						1/2"	4.6	175	N52	Through Thickness	Acrylic Plastic	—	—	Nickel Plated	7048T66	0000	0000	7048T67	0000	0000


						0.118" Thick



								5/16"	2.9	170	N35	Through Thickness	Acrylic Plastic	—	—	Nickel Plated	7048T39	0000	0000	7048T41	0000	0000


								15/32"	4	170	N35	Through Thickness	Acrylic Plastic	—	—	Nickel Plated	7048T44	0000	0000	7048T45	0000	0000
								45/64"	6	170	N35	Through Thickness	Acrylic Plastic	—	—	Nickel Plated	7048T51	00000	00000	7048T52	00000	00000


								1/8" Thick



										1/2"	4	170	N35	Through Thickness	Acrylic Plastic	—	—	Nickel Plated	7048T46	00000	0000	7048T47	00000	0000


										3/16" Thick



												3/4"	10	170	N35	Through Thickness	Acrylic Plastic	—	—	Nickel Plated	7048T53	00000	00000	7048T54	00000	00000


												1/4" Thick



														1/2"	9	170	N35	Through Thickness	Acrylic Plastic	—	—	Nickel Plated	7048T48	00000	00000	7048T49	00000	00000

Magnets With Unthreaded Hole


	Magnetized Through Thickness	Magnetized Through Diameter

N35SH and N38SH—These magnets are less likely than other grades to lose magnetic strength when exposed to temperatures up to 300°F.

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

										Each
	OD	Hole Dia.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Direction of Magnetization	Mounting Hole Style	Finish		1-49	50-Up
1/16" Thick



		3/8"	1/8"	1.5	300	N35SH	Through Thickness	Straight	Nickel Plated	3360K81	00000	00000


		0.1" Thick



				1/4"	1/8"	1.3	300	N38SH	Through Thickness	Straight	Nickel Plated	3360K11	0000	0000


				3/8"	1/8"	2.2	300	N38SH	Through Thickness	Straight	Nickel Plated	3360K7	0000	0000
				1/2"	1/8"	3	300	N38SH	Through Thickness	Straight	Nickel Plated	3360K72	0000	0000
				1/2"	0.2"	3	300	N38SH	Through Thickness	Straight	Nickel Plated	3360K31	0000	0000
				1"	1/8"	7	300	N38SH	Through Thickness	Straight	Nickel Plated	3360K75	0000	0000
				1"	1/4"	6	300	N38SH	Through Thickness	Straight	Nickel Plated	3360K77	00000	00000
				1"	1/2"	7	300	N38SH	Through Thickness	Straight	Nickel Plated	3360K51	00000	00000


				1/8" Thick



						1/4"	0.103"	3.5	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K223	0000	0000


						1/4"	0.107"	1.2	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K931	0000	0000
						1/4"	1/8"	1.5	175	N45	Through Thickness	Straight	Nickel Plated	3360K847	0000	0000
						1/4"	1/8"	2.6	175	N45	Through Diameter	Straight	Nickel Plated	3360K827	0000	0000
						3/8"	1/8"	3.8	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K919	0000	0000
						3/8"	1/8"	4	175	N45	Through Thickness	Straight	Nickel Plated	3360K848	0000	0000
						3/8"	1/8"	4.2	175	N45	Through Diameter	Straight	Nickel Plated	3360K828	0000	0000
						3/8"	1/8"	4.5	210	N35	Through Thickness	Countersunk	Nickel Plated	5862K921	0000	0000
						3/8"	0.135"	2.5	170	N35	Through Thickness	Countersunk	Nickel Plated	5862K12	0000	0000
						1/2"	1/8"	6	175	N45	Through Thickness	Straight	Nickel Plated	3360K849	0000	0000
						1/2"	1/8"	6	175	N45	Through Diameter	Straight	Nickel Plated	3360K829	0000	0000


						1/2"	0.135"	5.72	170	N35	Through Thickness	Countersunk	Nickel Plated	5862K14	0000	0000
						1/2"	0.136"	5.5	175	N42	Through Thickness	Countersunk	Nickel Plated	5862K922	0000	0000
						1/2"	0.153"	6	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K224	0000	0000
						5/8"	1/8"	8	175	N45	Through Thickness	Straight	Nickel Plated	3360K851	0000	0000
						5/8"	1/8"	8	175	N45	Through Diameter	Straight	Nickel Plated	3360K831	0000	0000
						5/8"	0.134"	6.8	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K924	0000	0000
						5/8"	0.165"	6.5	170	N35	Through Thickness	Countersunk	Nickel Plated	5862K16	0000	0000
						5/8"	0.17"	7.1	175	N42	Through Thickness	Countersunk	Nickel Plated	5862K923	0000	0000
						3/4"	1/8"	10	175	N45	Through Thickness	Straight	Nickel Plated	3360K852	0000	0000
						3/4"	1/8"	10	175	N45	Through Diameter	Straight	Nickel Plated	3360K832	0000	0000


						3/4"	0.188"	6.94	170	N35	Through Thickness	Countersunk	Nickel Plated	5862K18	00000	00000
						3/4"	0.283"	9	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K225	0000	0000
						7/8"	1/8"	11.5	175	N45	Through Thickness	Straight	Nickel Plated	3360K853	0000	0000
						7/8"	1/8"	11.5	175	N45	Through Diameter	Straight	Nickel Plated	3360K833	00000	0000
						7/8"	0.188"	8.11	170	N35	Through Thickness	Countersunk	Nickel Plated	5862K34	00000	00000
						1"	1/4"	13	175	N45	Through Thickness	Straight	Nickel Plated	3360K854	00000	0000
						1"	1/4"	13	175	N45	Through Diameter	Straight	Nickel Plated	3360K834	00000	0000


						3/16" Thick



3/4"	0.154"							14.7	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K925	0000	0000


1"	0.211"							22	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K229	00000	00000
1"	0.213"							16.4	170	N35	Through Thickness	Countersunk	Nickel Plated	5862K35	00000	00000
1"	0.275"							22	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K226	00000	00000


1/4" Thick



		1/4"	1/8"					2.3	300	N38SH	Through Thickness	Straight	Nickel Plated	3360K21	0000	0000


		1/4"	1/8"					2.5	175	N45	Through Thickness	Straight	Nickel Plated	3360K855	0000	0000
		1/4"	1/8"					2.5	175	N45	Through Diameter	Straight	Nickel Plated	3360K835	0000	0000
		3/8"	1/8"					5	300	N38SH	Through Thickness	Straight	Nickel Plated	3360K71	0000	0000
		3/8"	1/8"					6	175	N45	Through Thickness	Straight	Nickel Plated	3360K856	0000	0000
		3/8"	1/8"					6.5	175	N45	Through Diameter	Straight	Nickel Plated	3360K836	0000	0000
		1/2"	1/8"					8	300	N38SH	Through Thickness	Straight	Nickel Plated	3360K73	0000	0000
		1/2"	1/8"					11	175	N45	Through Thickness	Straight	Nickel Plated	3360K857	0000	0000
		1/2"	1/8"	11				175	N45	Through Diameter	Straight	Nickel Plated	3360K837	0000	0000
		1/2"	0.135"	11	175			N45	Through Thickness	Countersunk	Nickel Plated	5862K227	0000	0000
		1/2"	0.2"	8	300			N38SH	Through Thickness	Straight	Nickel Plated	3360K41	00000	00000


		5/8"	1/8"	15.5	175			N45	Through Thickness	Straight	Nickel Plated	3360K858	0000	0000
		5/8"	1/8"	15.5	175			N45	Through Diameter	Straight	Nickel Plated	3360K838	00000	0000
		3/4"	1/8"	19.5	175			N45	Through Thickness	Straight	Nickel Plated	3360K859	0000	0000
		3/4"	1/8"	19.5	175			N45	Through Diameter	Straight	Nickel Plated	3360K839	00000	0000
		3/4"	0.166"	18	175			N45	Through Thickness	Countersunk	Nickel Plated	5862K228	0000	0000
		7/8"	1/8"	24	175			N45	Through Thickness	Straight	Nickel Plated	3360K861	00000	0000
		7/8"	1/8"	24	175			N45	Through Diameter	Straight	Nickel Plated	3360K841	00000	00000
		7/8"	0.177"	22	175			N45	Through Thickness	Countersunk	Nickel Plated	5862K926	00000	0000
		1"	1/8"	19	300			N38SH	Through Thickness	Straight	Nickel Plated	3360K76	00000	00000
		1"	0.217"	27	175			N45	Through Thickness	Countersunk	Nickel Plated	5862K927	00000	00000


		1"	1/4"	16	300			N38SH	Through Thickness	Straight	Nickel Plated	3360K78	00000	00000
		1"	1/4"	27.5	175			N45	Through Thickness	Straight	Nickel Plated	3360K862	00000	00000
		1"	1/4"	27.5	175			N45	Through Diameter	Straight	Nickel Plated	3360K842	00000	00000
		1"	1/2"	20	300			N38SH	Through Thickness	Straight	Nickel Plated	3360K61	00000	00000
		1 1/4"	0.194"	30.5	175			N45	Through Thickness	Countersunk	Nickel Plated	5862K932	00000	00000
		1 1/4"	0.217"	30	175			N45	Through Thickness	Countersunk	Nickel Plated	5862K928	00000	00000


		3/8" Thick



				1 1/2"	0.211"			56	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K933	00000	00000


				1 1/2"	0.266"			55.2	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K929	00000	00000


				1/2" Thick



								1/2"	1/8"	14.4	175	N45	Through Thickness	Straight	Nickel Plated	3360K863	0000	0000


						1/2"		1/8"	14.5	175	N45	Through Diameter	Straight	Nickel Plated	3360K843	00000	0000
						1/2"	1/8"	16	300	N38SH	Through Thickness	Straight	Nickel Plated	3360K74	00000	00000
						3/4"	0.213"	23	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K231	00000	00000
						1"	0.212"	43	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K232	00000	00000
						1"	1/2"	21	300	N38SH	Through Thickness	Straight	Nickel Plated	3360K79	00000	00000
						2"	0.281"	96.5	175	N45	Through Thickness	Countersunk	Nickel Plated	5862K934	00000	00000


						3/4" Thick



						1"	1/2"	32	300	N38SH	Through Thickness	Straight	Nickel Plated	3360K8	00000	00000


						1" Thick



								1/2"	1/4"	13	175	N45	Through Thickness	Straight	Nickel Plated	3360K864	00000	00000


								1/2"	1/4"	13	175	N45	Through Diameter	Straight	Nickel Plated	3360K844	00000	00000


								1 1/2" Thick



										1/2"	1/4"	13.5	175	N45	Through Thickness	Straight	Nickel Plated	3360K865	00000	00000


										1/2"	1/4"	13.5	175	N45	Through Diameter	Straight	Nickel Plated	3360K845	00000	00000


										2" Thick



												1/2"	1/4"	13.6	175	N45	Through Diameter	Straight	Nickel Plated	3360K846	00000	00000


												1/2"	1/4"	13.7	175	N45	Through Thickness	Straight	Nickel Plated	3360K866	00000	00000

Threaded Encased Neodymium Disc Magnets


1	2	3	4

5	6	7

Magnetized

Through

Thickness

Magnetized

Through

Diameter

Thread powerful and durable magnets into position, then readjust if needed. A protective case shields these from the elements as well as cracks and chips when handling, mounting, or sweeping them. With the highest strength-to-size ratio of any magnet, they deliver powerful pull force even in tight spaces.

Magnets With Threaded Hole


1	2	3


Magnetized Through Thickness	Magnetized Through Diameter

Internally threaded for secure mounting with screws or bolts.

Steel Case—Maximizes holding power by concentrating magnetic force.

Zinc-Plated Steel Case—Withstands occasional exposure to moisture.

Aluminum Case—Lightweight and corrosion-resistant, this case is best for applications with weight limitations. However, the magnetic strength is lower than steel.

Magnetized Through Thickness—Magnetized from one flat face to the other, these magnets deliver a concentrated magnetic force. They’re best for direct contact with flat surfaces.

									Thread			Each
	Style	Thk.	OD	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Direction of Magnetization	Mounting Hole Style	Size	Dp.		1-49	50-Up
Steel Case



		1	1/2"	3/8"	6	170	N35	Through Thickness	Straight	8-32	0.1"	5679K11	000000	000000


		1	1/2"	1/2"	16	170	N35	Through Thickness	Straight	10-32	0.12"	5679K13	00000	00000
		1	1/2"	3/4"	40	170	N35	Through Thickness	Straight	10-32	0.15"	5679K15	00000	00000
		1	1/2"	1"	90	170	N35	Through Thickness	Straight	1/4"-20	0.15"	5679K17	00000	00000
		1	1/2"	1 1/4"	130	170	N35	Through Thickness	Straight	5/16"-18	0.15"	5679K21	00000	00000


		Zinc-Plated Steel Case



				2	13/64"	5/8"	18	175	N42	Through Thickness	Straight	8-32	0.27"	5679K53	0000	0000


				2	9/32"	51/64"	28	175	N42	Through Thickness	Straight	8-32	0.27"	5679K54	0000	0000
				2	5/16"	0.984", 63/64"	55	175	N42	Through Thickness	Straight	10-24	0.3"	5679K55	0000	0000
				2	5/16"	1 17/64"	75	175	N42	Through Thickness	Straight	1/4"-20	0.35"	5679K56	0000	0000
				2	5/16"	1 27/64"	100	175	N42	Through Thickness	Straight	1/4"-20	0.38"	5679K57	0000	0000
				2	23/64"	1 21/32"	150	175	N42	Through Thickness	Straight	5/16"-18	0.44"	5679K58	00000	0000
				2	29/64"	1 57/64"	175	175	N42	Through Thickness	Straight	5/16"-18	0.44"	5679K59	00000	00000
				2	4.5 mm	6 mm	1	175	—	Through Thickness	Straight	M3 × 0.5 mm	7 mm	5679K88	0000	0000
				2	4.5 mm	8 mm	2.5	175	—	Through Thickness	Straight	M3 × 0.5 mm	7 mm	5679K89	0000	0000
				2	4.5 mm	10 mm	5.5	175	—	Through Thickness	Straight	M3 × 0.5 mm	7 mm	5679K91	0000	0000
				2	4.5 mm	13 mm	13	175	—	Through Thickness	Straight	M3 × 0.5 mm	7 mm	5679K92	0000	0000


				2	4.5 mm	16 mm	20.5	175	—	Through Thickness	Straight	M4 × 0.7 mm	7 mm	5679K93	0000	0000
				2	6 mm	20 mm	30.5	175	—	Through Thickness	Straight	M4 × 0.7 mm	7 mm	5679K94	0000	0000
				2	7 mm	25 mm	44	175	—	Through Thickness	Straight	M4 × 0.7 mm	7 mm	5679K95	0000	0000
				2	7 mm	32 mm	77	175	—	Through Thickness	Straight	M5 × 0.8 mm	8.5 mm	5679K96	00000	00000
				3	7 mm	32 mm	70	170	—	Through Thickness	Straight	M5 × 0.8 mm	5.5 mm	5679K27	00000	00000
				3	8 mm	40 mm	110	170	—	Through Thickness	Straight	M5 × 0.8 mm	10.5 mm	5679K28	00000	00000


				Aluminum Case



						1	29/64"	1/2"	5.5	170	N38	Through Diameter	Straight	M5 × 0.8 mm	0.23"	5867K31	00000	00000


						1	1/2"	1/4"	0.5	170	N35	Through Thickness	Straight	6-32	1/4"	5867K21	00000	0000
						1	1/2"	3/8"	2.6	170	N35	Through Thickness	Straight	8-32	1/4"	5867K22	00000	0000
						1	1/2"	1/2"	5	170	N35	Through Thickness	Straight	10-24	1/4"	5867K23	00000	00000
						1	1/2"	5/8"	8	170	N35	Through Thickness	Straight	10-24	1/4"	5867K24	00000	00000
						1	1/2"	3/4"	12	170	N35	Through Thickness	Straight	10-24	1/4"	5867K25	00000	00000
						1	1/2"	1"	15	170	N35	Through Thickness	Straight	1/4"-20	1/4"	5867K26	00000	00000
						1	39/64"	5/8"	17.5	170	N38	Through Diameter	Straight	M6 × 1 mm	0.23"	5867K32	00000	00000
						1	25/32"	7/8"	35	170	N38	Through Diameter	Straight	M6 × 1 mm	0.23"	5867K33	00000	00000
						1	63/64"	63/64"	55	170	N38	Through Diameter	Straight	M6 × 1 mm	0.23"	5867K34	00000	00000
						1	1 3/16"	3/4"	35	170	N35	Through Diameter	Straight	1/4"-20	1/4"	5867K82	00000	00000


						1	1 5/16"	1"	85	170	N35	Through Diameter	Straight	1/4"-20	5/16"	5867K83	00000	00000
						1	2 1/16"	1 1/2"	200	170	N35	Through Diameter	Straight	5/16"-18	5/16"	5867K87	000000	000000
						1	2 7/16"	2"	340	170	N35	Through Diameter	Straight	3/8"-16	5/16"	5867K89	000000	000000

Magnets With Threaded Stud


4	5	6	7

Screw into tapped holes for secure mounting that’s also removable.

Zinc-Plated Steel Case—Withstands occasional exposure to moisture.

	Style	Thk.	OD	Overall Ht.	Max. Pull, lbf	Max. Temp., ° F	Magnet Grade	Thread Size	Choose a Stud Length	Pkg. Qty.		Pkg.
Zinc-Plated Steel Case



		4	13/64"	5/8"	1/2"	18	175	N42	8-32	0.3"	1	3506K61	00000


		4	9/32"	51/64"	0.576"	28	175	N42	8-32	0.3"	1	3506K62	0000
		4	5/16"	63/64"	0.615"	55	175	N42	10-24	3/8"	1	3506K63	0000
		4	5/16"	1 17/64"	0.685"	75	175	N42	1/4"-20	3/8"	1	3506K64	0000
		4	5/16"	1 27/64"	0.815"	100	175	N42	1/4"-20	1/2"	1	3506K65	00000
		4	23/64"	1 21/32"	0.856"	150	175	N42	5/16"-18	1/2"	1	3506K66	00000
		4	29/64"	1 57/64"	0.953"	175	175	N42	5/16"-18	1/2"	1	3506K67	00000
		4	4.5 mm	10 mm	12.5 mm	5	175	Not Rated	M4 × 0.7 mm	8 mm	1	1079N511	0000
		4	4.5 mm	13 mm	12.5 mm	13	175	Not Rated	M5 × 0.8 mm	8 mm	1	1079N512	0000
		4	4.5 mm	16 mm	12.5 mm	21	175	Not Rated	M6 × 1 mm	8 mm	1	1079N513	00000
		4	6 mm	20 mm	16 mm	31	175	Not Rated	M6 × 1 mm	10 mm	1	1079N514	00000


		4	7 mm	25 mm	17 mm	44	175	Not Rated	M6 × 1 mm	10 mm	1	1079N515	00000
		4	7 mm	32 mm	17 mm	78	175	Not Rated	M6 × 1 mm	10 mm	1	1079N516	00000
		4	9 mm	40 mm	20 mm	100	175	N35	M6 × 1 mm	11 mm	1	3506K71	00000
		5	4 mm	10 mm	—	5	170	Not Rated	M6 × 1 mm	12 mm, 16 mm, 20 mm, 25 mm, 30 mm	1	1079N41	00000
		5	4 mm	10 mm	16 mm	5	170	Not Rated	M6 × 1 mm	12 mm, 16 mm, 20 mm, 25 mm, 30 mm	1	1079N27	00000
		5	4 mm	10 mm	20 mm	5	170	Not Rated	M6 × 1 mm	12 mm, 16 mm, 20 mm, 25 mm, 30 mm	1	1079N28	00000
		5	4 mm	10 mm	24 mm	5	170	Not Rated	M6 × 1 mm	12 mm, 16 mm, 20 mm, 25 mm, 30 mm	1	1079N29	00000
		5	4 mm	10 mm	29 mm	5	170	Not Rated	M6 × 1 mm	12 mm, 16 mm, 20 mm, 25 mm, 30 mm	1	1079N31	00000
		5	4 mm	10 mm	34 mm	5	170	Not Rated	M6 × 1 mm	12 mm, 16 mm, 20 mm, 25 mm, 30 mm	1	1079N32	00000
		5	5.3 mm	13 mm	—	11	170	Not Rated	M8 × 1.25 mm	16 mm, 20 mm, 25 mm, 30 mm, 40 mm	1	1079N42	00000


		5	5.3 mm	13 mm	21 mm	11	170	Not Rated	M8 × 1.25 mm	16 mm, 20 mm, 25 mm, 30 mm, 40 mm	1	1079N33	00000
		5	5.3 mm	13 mm	25 mm	11	170	Not Rated	M8 × 1.25 mm	16 mm, 20 mm, 25 mm, 30 mm, 40 mm	1	1079N34	00000
		5	5.3 mm	13 mm	30 mm	11	170	Not Rated	M8 × 1.25 mm	16 mm, 20 mm, 25 mm, 30 mm, 40 mm	1	1079N35	00000
		5	5.3 mm	13 mm	35 mm	11	170	Not Rated	M8 × 1.25 mm	16 mm, 20 mm, 25 mm, 30 mm, 40 mm	1	1079N36	00000
		5	5.3 mm	13 mm	45 mm	11	170	Not Rated	M8 × 1.25 mm	16 mm, 20 mm, 25 mm, 30 mm, 40 mm	1	1079N37	00000
		5	6.4 mm	17 mm	—	16	170	Not Rated	M10 × 1.5 mm	20 mm, 25 mm, 30 mm, 40 mm, 50 mm	1	1079N43	00000
		5	6.4 mm	17 mm	26 mm	16	170	Not Rated	M10 × 1.5 mm	20 mm, 25 mm, 30 mm, 40 mm, 50 mm	1	1079N11	00000
		5	6.4 mm	17 mm	31 mm	16	170	Not Rated	M10 × 1.5 mm	20 mm, 25 mm, 30 mm, 40 mm, 50 mm	1	1079N12	00000
		5	6.4 mm	17 mm	36 mm	16	170	Not Rated	M10 × 1.5 mm	20 mm, 25 mm, 30 mm, 40 mm, 50 mm	1	1079N13	00000
		5	6.4 mm	17 mm	46 mm	16	170	Not Rated	M10 × 1.5 mm	20 mm, 25 mm, 30 mm, 40 mm, 50 mm	1	1079N14	00000


		5	6.4 mm	17 mm	56 mm	16	170	Not Rated	M10 × 1.5 mm	20 mm, 25 mm, 30 mm, 40 mm, 50 mm	1	1079N15	00000
		5	7.5 mm	19 mm	—	24	170	Not Rated	M12 × 1.75 mm	25 mm, 30 mm, 40 mm, 50 mm, 60 mm	1	1079N44	00000
		5	7.5 mm	19 mm	33 mm	24	170	Not Rated	M12 × 1.75 mm	25 mm, 30 mm, 40 mm, 50 mm, 60 mm	1	1079N16	00000
		5	7.5 mm	19 mm	38 mm	24	170	Not Rated	M12 × 1.75 mm	25 mm, 30 mm, 40 mm, 50 mm, 60 mm	1	1079N17	00000
		5	7.5 mm	19 mm	48 mm	24	170	Not Rated	M12 × 1.75 mm	25 mm, 30 mm, 40 mm, 50 mm, 60 mm	1	1079N18	00000
		5	7.5 mm	19 mm	58 mm	24	170	Not Rated	M12 × 1.75 mm	25 mm, 30 mm, 40 mm, 50 mm, 60 mm	1	1079N19	00000
		5	7.5 mm	19 mm	68 mm	24	170	Not Rated	M12 × 1.75 mm	25 mm, 30 mm, 40 mm, 50 mm, 60 mm	1	1079N21	00000
		5	10 mm	24 mm	—	32	170	Not Rated	M16 × 2 mm	30 mm, 40 mm, 50 mm, 60 mm, 80 mm	1	1079N45	00000
		5	10 mm	24 mm	40 mm	32	170	Not Rated	M16 × 2 mm	30 mm, 40 mm, 50 mm, 60 mm, 80 mm	1	1079N22	00000
		5	10 mm	24 mm	50 mm	32	170	Not Rated	M16 × 2 mm	30 mm, 40 mm, 50 mm, 60 mm, 80 mm	1	1079N23	00000


		5	10 mm	24 mm	60 mm	32	170	Not Rated	M16 × 2 mm	30 mm, 40 mm, 50 mm, 60 mm, 80 mm	1	1079N24	00000
		5	10 mm	24 mm	70 mm	32	170	Not Rated	M16 × 2 mm	30 mm, 40 mm, 50 mm, 60 mm, 80 mm	1	1079N25	00000
		5	10 mm	24 mm	90 mm	32	170	Not Rated	M16 × 2 mm	30 mm, 40 mm, 50 mm, 60 mm, 80 mm	1	1079N26	00000
		6	1/4"	1/2"	—	6	170	N35	—	—	1	3506K23	0000
		6	1/4"	5/8"	—	16	170	N35	—	—	1	3506K25	0000
		6	1/4"	3/4"	—	16	170	N35	—	—	1	3506K53	0000
		6	17/64"	1"	—	26	170	N35	—	—	1	3506K51	0000
		6	17/64"	1 1/8"	—	30	170	N35	—	—	1	3506K29	00000
		6	17/64"	1 1/2"	—	35	170	N35	—	—	1	3506K52	00000
		6	9/32"	7/8"	—	23	170	N35	—	—	1	3506K27	0000

7	0.337"	15/32"	—	4.4	180	N42	—	0.394"	2	3506K34	0000
7	25/64"	19/32"	—	4.4	180	N42	—	0.453"	2	3506K38	00000