60715K55 | One-Piece Thrust Ball Bearing

Filter by

System of Measurement

Shaft Diameter

Thickness

Material

Bearing Type

Lubrication

Dynamic Thrust Load Capacity

Less than 1,000 lb.

1,000 lb. to 9,999 lb.

10,000 lb. to 19,999 lb.

20,000 lb. to 29,999 lb.

30,000 lb. or greater

Bearing Seal Type

Cage Material

Static Thrust Load Capacity

Less than 10,000 lb.

10,000 lb. to 19,999 lb.

20,000 lb. to 99,999 lb.

100,000 lb. to 199,999 lb.

200,000 lb. or greater

Performance

Dynamic Thrust Load Capacity @ Speed

Maximum Rotation Speed

Maximum Temperature

Ball Material

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

RoHS

REACH

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

Minimum Temperature

Lubricant

Washer Material

Color

1,170 Products

Bearing Type

Plain

With no moving parts, the plainest type of bearing

844 products

Roller

Support high loads with a row of long rollers

180 products

Bearing Type

Ball

A row of balls rolls nearly friction-free for smooth motion

146 products

Environment

Food and Beverage

Meet NSF or FDA standards for food processing

75 products

Needle-Roller Thrust Bearings


Bearings	Washers

Small but mighty, our thinnest rolling thrust bearings slot into tight spaces and spin at whirring speeds. Their long, slender rollers support thrust loads and reduce friction in everything from machine tool spindles to gearboxes.

A cage holds the rollers in place. You can install these bearings without washers between hardened, ground surfaces for the thinnest profile. If you’re working with unhardened, unground surfaces, you’ll need two washers for the rollers to run on. This three-piece design is easy to lubricate, but the oil will attract dust and grime since it’s exposed.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

	Thrust Bearings										Thin Washers			Thick Washers
	For Shaft Dia.	OD	Thk.	Cage Material	Dynamic Thrust Load Cap., lb.	Max. Rotation Speed, rpm	Temp. Range, ° F	Specs. Met		Each	Thk.		Each	Thk.		Each
Steel



		1/4"	11/16"	5/64"	Steel	1,350	20,000	0 to 240	—	5909K23	00000	0.032"	5909K231	00000	0.095"	5909K987	00000


		5/16"	3/4"	5/64"	Steel	1,150	24,000	0 to 240	—	5909K24	0000	0.032"	5909K241	0000	1/16"	5909K978	0000
		3/8"	13/16"	5/64"	Steel	1,600	16,000	0 to 240	—	5909K25	0000	0.032"	5909K251	0000	0.063"	5909K988	0000
		1/2"	15/16"	5/64"	Steel	1,900	13,000	0 to 240	—	5909K31	0000	0.032"	5909K44	0000	0.063"	5909K989	0000
		9/16"	1"	5/64"	Steel	1,700	18,000	0 to 240	—	5909K951	0000	1/32"	5909K971	0000	1/16"	5909K979	0000
		5/8"	1 1/8"	5/64"	Steel	2,150	11,000	0 to 240	—	5909K32	0000	0.032"	5909K45	0000	0.063"	5909K992	0000
		3/4"	1 1/4"	5/64"	Steel	2,400	9,500	0 to 240	—	5909K33	0000	0.032"	5909K46	0000	0.126"	5909K59	0000
		7/8"	1 7/16"	5/64"	Steel	2,900	8,000	0 to 240	—	5909K34	0000	0.032"	5909K47	0000	0.126"	5909K61	0000
		7/8"	1 11/16"	5/64"	Steel	4,400	7,500	0 to 240	—	5909K35	0000	0.032"	5909K48	0000	—	———	0
		1"	1 9/16"	5/64"	Steel	3,150	7,500	0 to 240	—	5909K36	0000	0.032"	5909K49	0000	0.126"	5909K63	0000
		1 1/16"	1 5/8"	5/64"	Steel	3,400	8,400	0 to 240	—	5909K968	0000	—	———	0	—	———	0


		1 1/8"	1 3/4"	5/64"	Steel	3,850	6,500	0 to 240	—	5909K37	0000	0.032"	5909K51	0000	0.126"	5909K64	0000
		1 1/4"	1 15/16"	5/64"	Steel	4,500	6,000	0 to 240	—	5909K38	0000	0.032"	5909K52	0000	0.126"	5909K65	0000
		1 3/8"	2 1/16"	5/64"	Steel	4,600	5,500	0 to 240	—	5909K39	0000	0.032"	5909K53	0000	0.126"	5909K66	00000
		1 1/2"	2 3/16"	5/64"	Steel	4,850	5,000	0 to 240	—	5909K41	0000	0.032"	5909K54	0000	0.126"	5909K67	0000
		1 3/4"	2 1/2"	5/64"	Steel	5,600	4,400	0 to 240	—	5909K42	0000	0.032"	5909K55	0000	0.126"	5909K995	0000
		2"	2 3/4"	5/64"	Steel	5,800	4,000	0 to 240	—	5909K43	0000	0.032"	5909K56	0000	0.126"	5909K69	00000
		2 1/8"	2 7/8"	5/64"	Steel	5,450	5,800	0 to 240	—	5909K952	0000	1/32"	5909K972	0000	1/16"	5909K981	00000
		2 1/4"	3"	5/64"	Steel	5,550	5,600	0 to 240	—	5909K26	00000	0.032"	5909K261	0000	0.126"	5909K262	0000
		2 1/2"	3 1/4"	5/64"	Steel	6,200	3,300	0 to 240	—	5909K27	00000	0.032"	5909K271	0000	—	———	0
		2 3/4"	3 5/8"	1/8"	Steel	10,700	4,600	0 to 240	—	5909K954	00000	1/32"	5909K974	0000	1/16"	5909K983	00000


		3"	3 3/4"	5/64"	Steel	6,600	2,800	0 to 240	—	5909K28	00000	0.032"	5909K281	00000	0.126"	5909K282	00000
		3 1/4"	4 1/8"	1/8"	Steel	11,600	4,000	0 to 240	—	5909K955	00000	1/32"	5909K975	00000	1/8"	5909K984	00000
		3 3/4"	4 5/8"	1/8"	Steel	12,600	3,500	0 to 240	—	5909K956	00000	1/32"	5909K976	00000	1/16"	5909K985	00000
		4 1/8"	5 1/16"	1/8"	Steel	14,300	3,200	0 to 240	—	5909K957	000000	1/32"	5909K977	00000	3/32"	5909K986	00000
		4 mm	14 mm	2 mm	Nylon	1,000	21,000	0 to 240	DIN 5405-2	5909K1	0000	1 mm	5909K291	0000	—	———	0
		5 mm	15 mm	2 mm	Nylon	1,050	21,000	0 to 240	DIN 5405-2	5909K2	0000	1 mm	5909K292	0000	—	———	0
		6 mm	19 mm	2 mm	Nylon	1,500	19,000	0 to 240	DIN 5405-2	5909K29	0000	1 mm	5909K293	0000	2.75 mm	5909K294	00000
		8 mm	21 mm	2 mm	Nylon	1,750	18,000	0 to 240	DIN 5405-2	5909K3	0000	1 mm	5909K295	0000	2.75 mm	5909K296	00000
		10 mm	24 mm	2 mm	Steel	2,050	17,000	0 to 240	DIN 5405-2	5909K11	0000	1 mm	5909K71	0000	2.75 mm	5909K83	00000
		12 mm	26 mm	2 mm	Steel	2,200	15,000	0 to 240	DIN 5405-2	5909K12	0000	1 mm	5909K72	0000	2.75 mm	5909K84	0000


		15 mm	28 mm	2 mm	Steel	2,550	13,000	0 to 240	DIN 5405-2	5909K13	0000	1 mm	5909K73	0000	2.75 mm	5909K85	0000
		17 mm	30 mm	2 mm	Steel	2,700	12,000	0 to 240	DIN 5405-2	5909K14	0000	1 mm	5909K74	0000	2.75 mm	5909K86	00000
		18 mm	31 mm	2 mm	Steel	2,140	10,000	0 to 240	—	5909K95	00000	1 mm	5909K96	0000	—	———	0
		20 mm	35 mm	2 mm	Steel	2,950	10,000	0 to 240	DIN 5405-2	5909K15	0000	1 mm	5909K75	0000	2.75 mm	5909K87	00000
		25 mm	42 mm	2 mm	Steel	3,300	8,500	0 to 240	DIN 5405-2	5909K16	0000	1 mm	5909K76	0000	3 mm	5909K88	00000
		30 mm	47 mm	2 mm	Steel	3,650	7,500	0 to 240	DIN 5405-2	5909K17	0000	1 mm	5909K77	0000	3 mm	5909K89	00000
		35 mm	52 mm	2 mm	Steel	4,000	6,500	0 to 240	DIN 5405-2	5909K18	0000	1 mm	5909K78	0000	3.5 mm	5909K91	00000
		40 mm	60 mm	3 mm	Steel	6,300	6,000	0 to 240	DIN 5405-2	5909K4	00000	1 mm	5909K297	0000	3.5 mm	5909K298	00000
		45 mm	65 mm	3 mm	Steel	6,700	5,000	0 to 240	DIN 5405-2	5909K19	00000	1 mm	5909K79	0000	4 mm	5909K92	00000
		50 mm	70 mm	3 mm	Steel	7,200	4,800	0 to 240	DIN 5405-2	5909K21	00000	1 mm	5909K81	0000	4 mm	5909K93	00000


		55 mm	78 mm	3 mm	Steel	8,500	4,300	0 to 240	DIN 5405-2	5909K22	00000	1 mm	5909K82	0000	5 mm	5909K94	00000
		60 mm	85 mm	3 mm	Steel	10,000	4,000	0 to 240	DIN 5405-2	5909K5	00000	1 mm	5909K299	0000	4.75 mm	5909K581	00000
		65 mm	90 mm	3 mm	Steel	10,400	3,700	0 to 240	DIN 5405-2	5909K58	00000	1 mm	5909K582	0000	5.25 mm	5909K583	00000
		70 mm	95 mm	4 mm	Steel	12,100	3,500	0 to 240	DIN 5405-2	5909K6	00000	1 mm	5909K584	0000	5.25 mm	5909K585	00000
		75 mm	100 mm	4 mm	Steel	12,400	3,300	0 to 240	DIN 5405-2	5909K7	00000	1 mm	5909K586	00000	5.75 mm	5909K587	00000
		80 mm	105 mm	4 mm	Steel	12,500	3,100	0 to 240	DIN 5405-2	5909K8	00000	1 mm	5909K588	00000	5.75 mm	5909K589	00000
		85 mm	110 mm	4 mm	Steel	13,000	2,950	0 to 240	DIN 5405-3, ISO 303	5909K958	00000	1 mm	5909K996	00000	5.75 mm	5909K116	00000
		90 mm	120 mm	4 mm	Steel	16,400	2,700	0 to 240	DIN 5405-3, ISO 303	5909K959	00000	1 mm	5909K997	00000	—	———	0
		100 mm	135 mm	4 mm	Steel	20,400	2,420	0 to 240	DIN 5405-3, ISO 303	5909K961	00000	1 mm	5909K998	00000	—	———	0
		110 mm	145 mm	4 mm	Steel	21,800	2,230	0 to 240	DIN 5405-3, ISO 303	5909K962	000000	1 mm	5909K123	00000	—	———	0

120 mm	155 mm	4 mm	Steel	22,900	2,070	0 to 240	DIN 5405-3, ISO 303	5909K963	000000	1 mm	5909K111	00000	—	———	0
130 mm	170 mm	5 mm	Steel	29,900	1,900	0 to 240	DIN 5405-3, ISO 303	5909K964	000000	1 mm	5909K112	00000	—	———	0
140 mm	180 mm	5 mm	Steel	31,000	1,780	0 to 240	DIN 5405-3, ISO 303	5909K965	000000	1 mm	5909K113	00000	—	———	0
150 mm	190 mm	5 mm	Steel	32,100	1,680	0 to 240	DIN 5405-3, ISO 303	5909K966	000000	1 mm	5909K114	000000	—	———	0
160 mm	200 mm	5 mm	Steel	33,200	1,590	0 to 240	DIN 5405-3, ISO 303	5909K967	000000	1 mm	5909K115	000000	—	———	0

Thrust Ball Bearings

For silky-smooth motion, the balls inside these bearings roll nearly friction-free. You'll often find them at the end of a shaft or between a stationary and rotating surface, such as on a propeller or rotary table.

These bearings come as three separate pieces—one cage and two washers. The cage holds the balls in place, while the washers create a surface for the balls to roll on. This design is easy to lubricate, but the oil will attract dust and grime since it's exposed.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

Stainless Steel—These bearings won't degrade from water or mild chemicals, such as the ammonia in cleaning solutions. However, they're not as strong as steel bearings.

	For Shaft Dia.	OD	Thk.	Cage Material	Dynamic Thrust Load Cap., lb.	Max. Rotation Speed, rpm	Temp. Range, ° F	Includes		Each
Steel



		1/8"	7/16"	0.193"	Nylon	120	5,000	-40 to 220	Two Washers	6655K11	00000


		3/16"	1/2"	0.193"	Nylon	125	5,000	-40 to 220	Two Washers	6655K12	0000
		1/4"	9/16"	0.193"	Nylon	130	5,000	-40 to 220	Two Washers	6655K13	0000
		5/16"	5/8"	0.193"	Nylon	135	5,000	-40 to 220	Two Washers	6655K14	0000
		3/8"	13/16"	0.249"	Nylon	175	5,000	-40 to 220	Two Washers	6655K15	0000
		7/16"	7/8"	0.249"	Nylon	190	5,000	-40 to 220	Two Washers	6655K16	0000
		1/2"	15/16"	0.249"	Nylon	200	5,000	-40 to 220	Two Washers	6655K17	0000
		5/8"	1 1/8"	0.342"	Nylon	250	5,000	-40 to 220	Two Washers	6655K18	0000
		3/4"	1 1/4"	0.342"	Nylon	290	5,000	-40 to 220	Two Washers	6655K19	0000
		7/8"	1 3/8"	0.342"	Nylon	320	5,000	-40 to 220	Two Washers	6655K21	0000
		1"	1 5/8"	0.437"	Nylon	450	5,000	-40 to 220	Two Washers	6655K22	00000


		1 1/8"	1 3/4"	0.437"	Nylon	500	5,000	-40 to 220	Two Washers	6655K23	00000
		1 1/4"	1 7/8"	0.437"	Nylon	540	5,000	-40 to 220	Two Washers	6655K24	00000
		1 1/2"	2 1/8"	0.437"	Nylon	520	5,000	-40 to 220	Two Washers	6655K25	00000
		3 mm	8 mm	3.5 mm	Bronze	130	12,000	-60 to 250	Two Washers	7806K53	0000
		4 mm	9 mm	4 mm	Bronze	160	12,000	-60 to 250	Two Washers	7806K54	0000
		4 mm	9 mm	4.13 mm	Nylon	50	5,000	-40 to 220	Two Washers	6655K47	0000
		4 mm	10 mm	4 mm	Bronze	120	12,000	-60 to 250	Two Washers	7806K55	0000
		5 mm	12 mm	4 mm	Bronze	140	12,000	-60 to 250	Two Washers	7806K57	0000
		5 mm	12 mm	4.92 mm	Nylon	125	5,000	-40 to 220	Two Washers	6655K51	0000
		6 mm	12 mm	4.5 mm	Bronze	270	11,500	-60 to 250	Two Washers	7806K58	0000


		6 mm	14 mm	4.92 mm	Nylon	130	5,000	-40 to 220	Two Washers	6655K52	0000
		6 mm	14 mm	5 mm	Bronze	280	11,500	-60 to 250	Two Washers	7806K59	0000
		7 mm	17 mm	4.92 mm	Nylon	135	5,000	-40 to 220	Two Washers	6655K53	0000
		7 mm	17 mm	6 mm	Bronze	410	11,000	-60 to 250	Two Washers	7806K62	00000
		8 mm	16 mm	4.92 mm	Nylon	135	5,000	-40 to 220	Two Washers	6655K54	0000
		8 mm	16 mm	5 mm	Bronze	600	10,000	-60 to 250	Two Washers	7806K63	0000
		9 mm	17 mm	5 mm	Bronze	570	9,000	-60 to 250	Two Washers	7806K64	0000
		9 mm	20 mm	7 mm	Bronze	520	8,000	-60 to 250	Two Washers	7806K65	0000
		10 mm	21 mm	6.35 mm	Nylon	175	5,000	-40 to 220	Two Washers	6655K55	0000
		10 mm	24 mm	9 mm	Nylon	2,200	9,500	-40 to 250	Two Washers	7806K712	00000


		10 mm	26 mm	12 mm	Nylon	2,600	11,000	-40 to 240	Two Washers	6681K11	00000
		12 mm	24 mm	6.35 mm	Nylon	200	5,000	-40 to 220	Two Washers	6655K56	0000
		12 mm	26 mm	9 mm	Nylon	2,300	9,200	-40 to 250	Two Washers	7806K713	00000
		12 mm	28 mm	11 mm	Nylon	2,950	5,600	-40 to 250	Two Washers	6655K46	00000
		12 mm	28 mm	12 mm	Steel	2,100	9,500	-40 to 240	Two Washers	6681K12	00000
		15 mm	28 mm	9 mm	Nylon	2,300	8,800	-40 to 250	Two Washers	7806K714	00000
		15 mm	31 mm	12 mm	Steel	2,300	8,500	-40 to 240	Two Washers	6681K13	00000
		16 mm	28 mm	8.74 mm	Nylon	250	5,000	-40 to 220	Two Washers	6655K57	0000
		17 mm	30 mm	9 mm	Nylon	2,400	8,500	-40 to 250	Two Washers	7806K715	00000
		17 mm	35 mm	12 mm	Nylon	3,800	6,800	-40 to 250	Two Washers	7806K754	00000


		18 mm	35 mm	12 mm	Steel	3,350	7,500	-40 to 240	Two Washers	6681K14	00000
		19 mm	32 mm	8.74 mm	Nylon	290	5,000	-40 to 220	Two Washers	6655K58	0000
		20 mm	35 mm	10 mm	Nylon	3,100	7,500	-40 to 250	Two Washers	7806K716	00000
		20 mm	37 mm	12 mm	Steel	3,350	7,500	-40 to 240	Two Washers	6681K15	00000
		20 mm	40 mm	14 mm	Nylon	5,000	5,900	-40 to 250	Two Washers	7806K755	00000
		25 mm	41 mm	11.11 mm	Nylon	450	5,000	-40 to 220	Two Washers	6655K59	00000
		25 mm	42 mm	11 mm	Nylon	4,400	6,500	-40 to 250	Two Washers	7806K717	00000
		25 mm	45 mm	14 mm	Steel	5,000	5,500	-40 to 240	Two Washers	6681K16	00000
		25 mm	47 mm	15 mm	Nylon	6,200	5,300	-40 to 250	Two Washers	7806K756	00000
		25 mm	52 mm	18 mm	Steel	7,900	4,600	-40 to 250	Two Washers	7806K789	00000

28 mm	44 mm	11.11 mm	Nylon	500	5,000	-40 to 220	Two Washers	6655K61	00000
30 mm	47 mm	11 mm	Nylon	4,500	6,200	-40 to 250	Two Washers	7806K718	00000
30 mm	52 mm	16 mm	Nylon	6,500	4,900	-40 to 250	Two Washers	7806K757	00000
30 mm	60 mm	21 mm	Steel	9,600	3,900	-40 to 250	Two Washers	7806K791	00000
35 mm	52 mm	12 mm	Nylon	4,500	5,600	-40 to 250	Two Washers	7806K719	00000
35 mm	55 mm	16 mm	Steel	6,600	3,300	-40 to 240	Two Washers	6681K23	00000
35 mm	62 mm	18 mm	Nylon	8,700	4,200	-40 to 250	Two Washers	7806K758	00000
40 mm	60 mm	16 mm	Steel	5,650	4,000	-40 to 240	Two Washers	6681K18	00000
40 mm	68 mm	19 mm	Steel	10,500	3,900	-40 to 250	Two Washers	7806K759	00000
45 mm	68 mm	16 mm	Steel	6,500	3,600	-40 to 240	Two Washers	6681K19	00000
45 mm	73 mm	20 mm	Steel	10,600	3,700	-40 to 250	Two Washers	7806K761	00000
50 mm	70 mm	14 mm	Steel	6,400	4,500	-40 to 250	Two Washers	7806K721	00000
50 mm	74 mm	18 mm	Nylon	8,300	3,200	-40 to 240	Two Washers	6681K25	00000
50 mm	78 mm	22 mm	Steel	10,900	3,400	-40 to 250	Two Washers	7806K762	000000
55 mm	78 mm	18 mm	Steel	8,900	2,600	-40 to 240	Two Washers	6681K24	000000
55 mm	90 mm	25 mm	Steel	15,600	3,000	-40 to 250	Two Washers	7806K763	000000
60 mm	85 mm	17 mm	Steel	9,300	3,700	-40 to 250	Two Washers	7806K722	000000
65 mm	90 mm	18 mm	Steel	9,300	3,500	-40 to 250	Two Washers	7806K723	000000
70 mm	95 mm	18 mm	Steel	9,600	3,400	-40 to 250	Two Washers	7806K724	000000
75 mm	100 mm	19 mm	Steel	10,000	3,200	-40 to 250	Two Washers	7806K725	000000
80 mm	105 mm	19 mm	Steel	10,000	3,100	-40 to 250	Two Washers	7806K726	000000
100 mm	135 mm	25 mm	Steel	19,100	2,400	-40 to 250	Two Washers	7806K729	000000
120 mm	155 mm	25 mm	Steel	20,000	2,200	-40 to 250	Two Washers	7806K732	000000

Stainless Steel



		1/8"	7/16"	0.193"	Nylon	80	5,000	-40 to 220	Two Washers	6655K31	0000


		3/16"	1/2"	0.193"	Nylon	85	5,000	-40 to 220	Two Washers	6655K32	0000
		1/4"	9/16"	0.193"	Nylon	90	5,000	-40 to 220	Two Washers	6655K33	0000
		5/16"	5/8"	0.193"	Nylon	95	5,000	-40 to 220	Two Washers	6655K34	0000
		3/8"	13/16"	0.249"	Nylon	120	5,000	-40 to 220	Two Washers	6655K35	0000
		7/16"	7/8"	0.249"	Nylon	130	5,000	-40 to 220	Two Washers	6655K36	0000
		1/2"	15/16"	0.249"	Nylon	140	5,000	-40 to 220	Two Washers	6655K37	0000
		9/16"	1"	0.249"	Nylon	145	5,000	-40 to 220	Two Washers	6655K82	0000
		5/8"	1 1/8"	0.342"	Nylon	175	5,000	-40 to 220	Two Washers	6655K38	0000
		3/4"	1 1/4"	0.342"	Nylon	205	5,000	-40 to 220	Two Washers	6655K39	0000
		7/8"	1 3/8"	0.342"	Nylon	195	5,000	-40 to 220	Two Washers	6655K41	00000


		1"	1 5/8"	0.437"	Nylon	320	5,000	-40 to 220	Two Washers	6655K42	00000
		1 1/8"	1 3/4"	0.437"	Nylon	350	5,000	-40 to 220	Two Washers	6655K43	00000
		1 1/4"	1 7/8"	0.437"	Nylon	380	5,000	-40 to 220	Two Washers	6655K44	00000
		1 1/2"	2 1/8"	0.437"	Nylon	360	5,000	-40 to 220	Two Washers	6655K45	00000
		4 mm	9 mm	4.13 mm	Nylon	35	5,000	-40 to 220	Two Washers	6655K91	0000
		5 mm	12 mm	4.92 mm	Nylon	85	5,000	-40 to 220	Two Washers	6655K71	0000
		6 mm	14 mm	4.92 mm	Nylon	90	5,000	-40 to 220	Two Washers	6655K72	0000
		7 mm	17 mm	4.92 mm	Nylon	95	5,000	-40 to 220	Two Washers	6655K73	0000
		8 mm	16 mm	4.92 mm	Nylon	95	5,000	-40 to 220	Two Washers	6655K74	0000
		10 mm	21 mm	6.35 mm	Nylon	120	5,000	-40 to 220	Two Washers	6655K75	0000


		12 mm	24 mm	6.35 mm	Nylon	140	5,000	-40 to 220	Two Washers	6655K76	0000
		16 mm	28 mm	8.69 mm	Nylon	175	5,000	-40 to 220	Two Washers	6655K77	0000
		19 mm	32 mm	8.69 mm	Nylon	205	5,000	-40 to 220	Two Washers	6655K78	00000
		25 mm	41 mm	11.11 mm	Nylon	320	5,000	-40 to 220	Two Washers	6655K79	00000
		28 mm	44 mm	11.11 mm	Nylon	350	5,000	-40 to 220	Two Washers	6655K81	00000

Oil-Embedded Thrust Bearings

Our simplest-to-use thrust bearings, with no moving parts and no need to lubricate. Their porous surface releases oil over time, so you can install and forget them. While they run in most conditions, oil may drip away if temperatures climb too high. For extremely hot environments, consider graphite-lubricated bearings. All are fabricated, lubricated, and inspected in the U.S.

841 Bearing Bronze—A balance of strength and speed makes these bearings a good choice for most applications. Also known as SAE 841 bearing bronze.

High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they run at slower speeds. The increased iron content also makes them appear silver.

Extreme-Load Heat-Treated Iron Copper—Our strongest oil-embedded thrust bearings. They're heat treated to form a uniform internal grain that makes them stronger than 863 iron copper. As a result, they're often used to support extreme loads in earth-moving equipment and railroad applications. The increased iron content also makes them appear silver.

Mineral Oil Base—Mineral oil consistently lubricates at most temperatures but doesn’t last as long as synthetic oil.

Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away if the bearing heats up.

	For Shaft Dia.	OD	Thk.	Dynamic Thrust Load Cap. @ Speed	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze



		3/16"	3/8"	1/16"	340 lb. @ 120 rpm	Synthetic Oil	-35 to 300	5906K614	000000


		1/4"	7/16"	1/16"	200 lb. @ 120 rpm	Synthetic Oil	-35 to 300	5906K561	0000
		1/4"	1/2"	1/16"	290 lb. @ 120 rpm	Synthetic Oil	-35 to 300	5906K562	0000
		1/4"	5/8"	1/16"	510 lb. @ 120 rpm	Synthetic Oil	-35 to 300	5906K531	0000
		5/16"	5/8"	1/16"	460 lb. @ 120 rpm	Synthetic Oil	-35 to 300	5906K563	0000
		5/16"	3/4"	1/16"	730 lb. @ 120 rpm	Synthetic Oil	-35 to 300	5906K564	0000
		3/8"	5/8"	1/16"	390 lb. @ 120 rpm	Synthetic Oil	-35 to 300	5906K565	0000
		3/8"	3/4"	1/32"	650 lb. @ 120 rpm	Synthetic Oil	-35 to 300	5906K601	0000
		3/8"	3/4"	1/16"	660 lb. @ 120 rpm	Synthetic Oil	-35 to 300	5906K511	0000
		3/8"	3/4"	1/8"	660 lb. @ 120 rpm	Synthetic Oil	-35 to 300	5906K533	0000
		7/16"	3/4"	1/16"	580 lb. @ 120 rpm	Synthetic Oil	-35 to 300	5906K566	0000


		1/2"	3/4"	1/16"	490 lb. @ 120 rpm	Synthetic Oil	-35 to 300	5906K512	0000
		1/2"	7/8"	3/16"	730 lb. @ 120 rpm	Synthetic Oil	-35 to 300	5906K411	0000
		1/2"	1"	1/16"	930 lb. @ 120 rpm	Synthetic Oil	-35 to 300	5906K513	0000
		1/2"	1"	3/32"	930 lb. @ 120 rpm	Synthetic Oil	-35 to 300	5906K535	0000
		1/2"	1"	1/8"	930 lb. @ 120 rpm	Synthetic Oil	-35 to 300	5906K514	0000
		9/16"	1 1/4"	1/16"	1,950 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K537	0000
		9/16"	1 1/4"	1/8"	1,950 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K539	0000
		5/8"	1"	1/16"	950 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K515	0000
		5/8"	1"	1/8"	950 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K516	0000
		5/8"	1 3/16"	1/16"	1,600 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K541	0000


		5/8"	1 3/16"	3/32"	1,600 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K543	0000
		5/8"	1 3/16"	1/8"	1,600 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K545	0000
		5/8"	1 1/4"	1/16"	1,800 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K547	0000
		5/8"	1 1/4"	1/8"	1,800 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K602	0000
		5/8"	1 1/2"	1/16"	2,900 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K567	0000
		5/8"	1 1/2"	1/8"	2,900 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K568	0000
		11/16"	1 1/4"	1/8"	2,100 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K615	00000
		3/4"	1 1/4"	1/16"	1,550 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K517	0000
		3/4"	1 1/4"	1/8"	1,550 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K518	0000
		3/4"	1 3/8"	1/16"	2,050 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K603	0000


		3/4"	1 3/8"	1/8"	2,050 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K519	0000
		3/4"	1 3/8"	1/4"	2,050 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K569	0000
		3/4"	1 9/16"	3/32"	2,950 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K549	0000
		3/4"	1 3/4"	1/8"	3,550 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K521	0000
		13/16"	1 1/2"	1/8"	2,600 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K616	00000
		7/8"	1 1/2"	1/16"	2,300 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K551	0000
		7/8"	1 1/2"	1/8"	2,300 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K522	0000
		7/8"	2"	1/8"	4,000 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K571	0000
		15/16"	1 1/2"	1/8"	2,200 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K617	00000
		1"	1 1/2"	1/16"	1,950 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K412	0000


		1"	1 1/2"	1/8"	1,950 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K523	0000
		1"	1 1/2"	3/16"	1,950 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K604	0000
		1"	1 5/8"	1/16"	2,450 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K605	0000
		1"	1 5/8"	1/8"	2,450 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K606	0000
		1"	1 5/8"	1/4"	2,500 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K572	0000
		1"	1 3/4"	1/16"	2,900 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K573	0000
		1"	1 3/4"	1/8"	2,900 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K574	0000
		1"	2"	1/8"	3,750 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K524	0000
		1"	2"	3/16"	3,750 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K555	0000
		1"	2 7/8"	1/8"	6,300 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K415	00000

1 1/16"	2 3/8"	1/16"	7,050 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K575	0000
1 1/16"	2 3/8"	1/8"	7,050 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K607	00000
1 1/8"	1 7/8"	1/8"	3,500 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K576	0000
1 3/16"	2"	1/8"	4,050 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K577	00000
1 1/4"	1 11/16"	1/8"	2,000 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K578	0000
1 1/4"	2"	1/16"	3,800 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K553	0000
1 1/4"	2"	1/8"	3,800 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K525	0000
1 1/4"	2 3/8"	1/16"	6,400 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K579	0000
1 1/4"	2 3/8"	1/8"	6,400 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K581	0000
1 1/4"	3 5/16"	1/16"	14,200 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K608	00000
1 1/4"	3 5/16"	1/8"	14,200 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K609	00000
1 3/8"	1 15/16"	1/8"	2,900 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K582	0000
1 7/16"	2 1/2"	1/8"	6,550 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K583	00000
1 1/2"	2"	1/8"	2,700 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K584	00000
1 1/2"	2 1/2"	1/8"	6,250 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K526	0000
1 1/2"	3 1/2"	3/16"	14,250 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K527	00000
1 9/16"	2 7/16"	1/8"	5,450 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K585	00000
1 5/8"	2 1/2"	1/8"	7,000 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K618	00000
1 3/4"	2 7/16"	1/8"	4,500 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K414	0000
1 3/4"	2 5/8"	1/8"	6,000 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K413	0000
1 15/16"	2 5/8"	1/8"	4,850 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K611	0000
2"	3"	1/8"	7,850 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K528	0000
2"	3"	3/16"	7,800 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K612	00000
2"	3"	1/4"	7,850 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K586	00000
2"	3 5/8"	3/16"	12,450 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K613	00000
2"	4"	1/8"	15,000 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K587	00000
2"	4"	1/4"	15,000 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K588	00000
2 1/16"	4"	1/8"	14,200 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K619	00000
2 1/8"	4"	1/8"	14,000 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K62	00000
2 1/4"	4 1/2"	1/8"	16,500 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K621	00000
2 1/2"	3 1/4"	1/8"	6,600 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K589	00000
2 3/4"	3 7/8"	1/4"	9,600 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K591	00000
3"	4 1/2"	1/8"	12,000 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K622	00000
3 1/4"	4 1/2"	1/8"	10,500 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K623	00000
3 1/2"	5"	1/8"	12,500 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K624	00000
3 3/4"	5"	1/8"	10,500 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K625	00000
4"	5 1/2"	1/8"	12,500 lb. @ 30 rpm	Synthetic Oil	-35 to 300	5906K626	00000
3 mm	6 mm	1.5 mm	210 lb. @ 120 rpm	Synthetic Oil	-35 to 300	2011N36	0000
4 mm	8 mm	1.5 mm	280 lb. @ 120 rpm	Synthetic Oil	-35 to 300	2011N137	0000
5 mm	10 mm	1.5 mm	360 lb. @ 120 rpm	Synthetic Oil	-35 to 300	2011N138	0000
6 mm	12 mm	1.5 mm	260 lb. @ 120 rpm	Synthetic Oil	-35 to 300	2011N111	0000
7 mm	14 mm	1.5 mm	500 lb. @ 120 rpm	Synthetic Oil	-35 to 300	2011N139	0000
8 mm	16 mm	1.5 mm	460 lb. @ 120 rpm	Synthetic Oil	-35 to 300	2011N112	0000
9 mm	18 mm	1.5 mm	650 lb. @ 120 rpm	Synthetic Oil	-35 to 300	2011N141	0000
10 mm	18 mm	1.5 mm	540 lb. @ 120 rpm	Synthetic Oil	-35 to 300	2011N113	0000
10 mm	18 mm	2 mm	540 lb. @ 120 rpm	Synthetic Oil	-35 to 300	2011N114	0000
12 mm	24 mm	2 mm	880 lb. @ 120 rpm	Synthetic Oil	-35 to 300	2011N115	0000
12 mm	24 mm	3 mm	880 lb. @ 120 rpm	Synthetic Oil	-35 to 300	2011N116	0000
14 mm	28 mm	2 mm	1,400 lb. @ 60 rpm	Synthetic Oil	-35 to 300	2011N117	0000
15 mm	30 mm	2 mm	1,600 lb. @ 60 rpm	Synthetic Oil	-35 to 300	2011N118	0000
15 mm	30 mm	3 mm	1,600 lb. @ 60 rpm	Synthetic Oil	-35 to 300	2011N119	0000
16 mm	32 mm	2 mm	1,850 lb. @ 60 rpm	Synthetic Oil	-35 to 300	2011N121	0000
16 mm	32 mm	3 mm	1,850 lb. @ 60 rpm	Synthetic Oil	-35 to 300	2011N122	0000
16 mm	32 mm	4 mm	1,850 lb. @ 60 rpm	Synthetic Oil	-35 to 300	2011N135	0000
18 mm	36 mm	2 mm	2,350 lb. @ 60 rpm	Synthetic Oil	-35 to 300	2011N123	0000
18 mm	36 mm	3 mm	2,350 lb. @ 60 rpm	Synthetic Oil	-35 to 300	2011N124	0000
20 mm	40 mm	2 mm	2,900 lb. @ 60 rpm	Synthetic Oil	-35 to 300	2011N125	0000
20 mm	40 mm	3 mm	2,900 lb. @ 60 rpm	Synthetic Oil	-35 to 300	2011N126	0000
24 mm	48 mm	3 mm	3,500 lb. @ 60 rpm	Synthetic Oil	-35 to 300	2011N127	0000
24 mm	48 mm	4 mm	3,500 lb. @ 60 rpm	Synthetic Oil	-35 to 300	2011N128	0000
25 mm	50 mm	3 mm	3,650 lb. @ 60 rpm	Synthetic Oil	-35 to 300	2011N129	0000
25 mm	50 mm	4 mm	3,650 lb. @ 60 rpm	Synthetic Oil	-35 to 300	2011N131	00000
30 mm	60 mm	4 mm	6,550 lb. @ 30 rpm	Synthetic Oil	-35 to 300	2011N132	00000
30 mm	60 mm	5 mm	6,550 lb. @ 30 rpm	Synthetic Oil	-35 to 300	2011N133	00000
35 mm	60 mm	4 mm	3,800 lb. @ 60 rpm	Synthetic Oil	-35 to 300	2011N142	00000
40 mm	60 mm	4 mm	4,850 lb. @ 30 rpm	Synthetic Oil	-35 to 300	2011N134	00000
45 mm	65 mm	4 mm	3,200 lb. @ 60 rpm	Synthetic Oil	-35 to 300	2011N143	00000
50 mm	75 mm	5 mm	3,200 lb. @ 60 rpm	Synthetic Oil	-35 to 300	2011N144	00000
60 mm	90 mm	5 mm	9,500 lb. @ 30 rpm	Synthetic Oil	-35 to 300	2011N145	00000

High-Load 863 Iron Copper



		1/4"	5/8"	1/16"	450 lb. @ 120 rpm	Synthetic Oil	-15 to 300	2879T1	0000


		3/8"	3/4"	1/16"	490 lb. @ 120 rpm	Synthetic Oil	-15 to 300	2879T2	0000
		3/8"	3/4"	1/8"	490 lb. @ 120 rpm	Synthetic Oil	-15 to 300	2879T3	0000
		1/2"	3/4"	1/16"	360 lb. @ 120 rpm	Synthetic Oil	-15 to 300	2879T19	0000
		1/2"	7/8"	3/16"	510 lb. @ 120 rpm	Synthetic Oil	-15 to 300	2879T21	0000
		1/2"	1"	1/16"	650 lb. @ 120 rpm	Synthetic Oil	-15 to 300	2879T4	0000
		1/2"	1"	3/32"	650 lb. @ 120 rpm	Synthetic Oil	-15 to 300	2879T18	0000
		1/2"	1"	1/8"	650 lb. @ 120 rpm	Synthetic Oil	-15 to 300	2879T5	0000
		9/16"	1 1/4"	1/16"	1,700 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2879T37	0000
		9/16"	1 1/4"	1/8"	1,700 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2879T38	0000
		5/8"	1"	1/16"	1,050 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2879T29	0000


		5/8"	1"	1/8"	1,050 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2879T6	0000
		5/8"	1 3/16"	1/16"	1,500 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2879T32	0000
		5/8"	1 3/16"	3/32"	1,500 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2879T34	0000
		5/8"	1 3/16"	1/8"	1,500 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2879T33	0000
		5/8"	1 1/4"	1/16"	1,600 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2879T31	0000
		3/4"	1 1/4"	1/16"	1,400 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2879T7	0000
		3/4"	1 1/4"	1/8"	1,400 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2879T8	0000
		3/4"	1 3/8"	1/8"	1,650 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2879T27	0000
		3/4"	1 9/16"	3/32"	2,100 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2879T28	0000
		3/4"	1 3/4"	1/8"	2,500 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2879T9	0000


		7/8"	1 1/2"	1/16"	1,700 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2879T35	0000
		7/8"	1 1/2"	1/8"	1,700 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2879T36	0000
		1"	1 1/2"	1/16"	1,450 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2879T15	0000
		1"	1 1/2"	1/8"	1,450 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2879T11	0000
		1"	2"	1/8"	2,600 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2879T12	0000
		1"	2"	3/16"	2,600 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2879T16	0000
		1"	2 7/8"	1/8"	4,400 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2879T17	0000
		1 1/4"	2"	1/16"	4,250 lb. @ 30 rpm	Synthetic Oil	-15 to 300	2879T23	0000
		1 1/4"	2"	1/8"	4,250 lb. @ 30 rpm	Synthetic Oil	-15 to 300	2879T13	0000
		1 1/2"	2 1/2"	1/8"	5,600 lb. @ 30 rpm	Synthetic Oil	-15 to 300	2879T14	0000


		1 1/2"	3 1/2"	3/16"	10,000 lb. @ 30 rpm	Synthetic Oil	-15 to 300	2879T22	00000
		1 3/4"	2 7/16"	1/8"	4,100 lb. @ 30 rpm	Synthetic Oil	-15 to 300	2879T25	0000
		1 3/4"	2 5/8"	1/8"	5,100 lb. @ 30 rpm	Synthetic Oil	-15 to 300	2879T24	0000
		2"	3"	1/8"	5,800 lb. @ 30 rpm	Synthetic Oil	-15 to 300	2879T26	0000
		6 mm	12 mm	1.5 mm	310 lb. @ 120 rpm	Synthetic Oil	-15 to 300	5230N111	0000
		8 mm	16 mm	1.5 mm	410 lb. @ 120 rpm	Synthetic Oil	-15 to 300	5230N112	0000
		10 mm	18 mm	1.5 mm	420 lb. @ 120 rpm	Synthetic Oil	-15 to 300	5230N114	0000
		10 mm	18 mm	2 mm	420 lb. @ 120 rpm	Synthetic Oil	-15 to 300	5230N113	0000
		12 mm	24 mm	2 mm	620 lb. @ 120 rpm	Synthetic Oil	-15 to 300	5230N115	0000
		12 mm	24 mm	3 mm	620 lb. @ 120 rpm	Synthetic Oil	-15 to 300	5230N116	0000


		15 mm	30 mm	3 mm	1,550 lb. @ 60 rpm	Synthetic Oil	-15 to 300	5230N119	0000
		16 mm	32 mm	2 mm	1,650 lb. @ 60 rpm	Synthetic Oil	-15 to 300	5230N121	0000
		20 mm	40 mm	2 mm	2,050 lb. @ 60 rpm	Synthetic Oil	-15 to 300	5230N125	0000
		20 mm	40 mm	3 mm	2,050 lb. @ 60 rpm	Synthetic Oil	-15 to 300	5230N126	0000
		30 mm	60 mm	4 mm	6,200 lb. @ 30 rpm	Synthetic Oil	-15 to 300	5230N132	00000
		30 mm	60 mm	5 mm	6,200 lb. @ 30 rpm	Synthetic Oil	-15 to 300	5230N133	00000
		40 mm	60 mm	4 mm	4,550 lb. @ 30 rpm	Synthetic Oil	-15 to 300	5230N134	00000


		Extreme-Load Heat-Treated Iron Copper



		1/4"	5/8"	1/16"	980 lb. @ 120 rpm	Mineral Oil	-11 to 400	3750K1	0000


		3/8"	3/4"	1/16"	1,050 lb. @ 120 rpm	Mineral Oil	-11 to 400	3750K2	0000
		3/8"	3/4"	1/8"	1,050 lb. @ 120 rpm	Mineral Oil	-11 to 400	3750K3	0000
		1/2"	3/4"	1/16"	780 lb. @ 120 rpm	Mineral Oil	-11 to 400	3750K4	0000
		1/2"	1"	1/16"	1,400 lb. @ 120 rpm	Mineral Oil	-11 to 400	3750K5	0000
		1/2"	1"	3/32"	1,400 lb. @ 120 rpm	Mineral Oil	-11 to 400	3750K6	0000
		1/2"	1"	1/8"	1,400 lb. @ 120 rpm	Mineral Oil	-11 to 400	3750K7	0000
		9/16"	1 1/4"	1/16"	3,700 lb. @ 60 rpm	Mineral Oil	-11 to 400	3750K8	0000
		9/16"	1 1/4"	1/8"	3,700 lb. @ 60 rpm	Mineral Oil	-11 to 400	3750K9	0000
		5/8"	1"	1/16"	2,250 lb. @ 60 rpm	Mineral Oil	-11 to 400	3750K11	0000
		5/8"	1"	1/8"	2,250 lb. @ 60 rpm	Mineral Oil	-11 to 400	3750K12	0000


		5/8"	1 3/16"	1/16"	3,200 lb. @ 60 rpm	Mineral Oil	-11 to 400	3750K13	0000
		5/8"	1 3/16"	3/32"	3,200 lb. @ 60 rpm	Mineral Oil	-11 to 400	3750K14	0000
		5/8"	1 3/16"	1/8"	3,200 lb. @ 60 rpm	Mineral Oil	-11 to 400	3750K15	0000
		5/8"	1 1/4"	1/16"	3,500 lb. @ 60 rpm	Mineral Oil	-11 to 400	3750K16	0000
		3/4"	1 1/4"	1/16"	3,000 lb. @ 60 rpm	Mineral Oil	-11 to 400	3750K17	0000
		3/4"	1 1/4"	1/8"	3,000 lb. @ 60 rpm	Mineral Oil	-11 to 400	3750K18	0000
		3/4"	1 3/8"	1/8"	3,600 lb. @ 60 rpm	Mineral Oil	-11 to 400	3750K19	0000
		3/4"	1 9/16"	3/32"	4,500 lb. @ 60 rpm	Mineral Oil	-11 to 400	3750K21	0000
		3/4"	1 3/4"	1/8"	5,350 lb. @ 60 rpm	Mineral Oil	-11 to 400	3750K22	0000
		7/8"	1 1/2"	1/16"	3,700 lb. @ 60 rpm	Mineral Oil	-11 to 400	3750K23	0000


		7/8"	1 1/2"	1/8"	3,700 lb. @ 60 rpm	Mineral Oil	-11 to 400	3750K24	0000
		1"	1 1/2"	1/16"	3,100 lb. @ 60 rpm	Mineral Oil	-11 to 400	3750K25	0000
		1"	1 1/2"	1/8"	3,100 lb. @ 60 rpm	Mineral Oil	-11 to 400	3750K26	0000
		1"	2"	1/8"	5,600 lb. @ 60 rpm	Mineral Oil	-11 to 400	3750K27	0000
		1 1/4"	2"	1/16"	9,100 lb. @ 30 rpm	Mineral Oil	-11 to 400	3750K28	0000
		1 1/4"	2"	1/8"	9,100 lb. @ 30 rpm	Mineral Oil	-11 to 400	3750K29	0000
		1 1/2"	2 1/2"	1/8"	12,000 lb. @ 30 rpm	Mineral Oil	-11 to 400	3750K31	0000
		1 1/2"	3 9/16"	9/32"	21,950 lb. @ 30 rpm	Mineral Oil	-11 to 400	3750K32	00000
		1 3/4"	2 5/8"	1/8"	10,900 lb. @ 30 rpm	Mineral Oil	-11 to 400	3750K33	0000
		2"	3"	1/8"	12,500 lb. @ 30 rpm	Mineral Oil	-11 to 400	3750K34	0000


		12 mm	24 mm	2 mm	1,300 lb. @ 120 rpm	Mineral Oil	-11 to 400	3750K35	00000
		12 mm	24 mm	3 mm	1,300 lb. @ 120 rpm	Mineral Oil	-11 to 400	3750K36	00000
		15 mm	30 mm	2 mm	3,300 lb. @ 60 rpm	Mineral Oil	-11 to 400	3750K38	00000
		16 mm	32 mm	2 mm	3,500 lb. @ 60 rpm	Mineral Oil	-11 to 400	3750K56	00000
		20 mm	40 mm	3 mm	4,400 lb. @ 60 rpm	Mineral Oil	-11 to 400	3750K47	00000
		40 mm	60 mm	4 mm	9,800 lb. @ 30 rpm	Mineral Oil	-11 to 400	3750K55	00000

One-Piece Thrust Ball Bearings

No need to assemble cages and washers—these thrust ball bearings come as one piece for easy installation. The balls spin inside a raceway instead of a cage, so there's room for more balls to support higher loads than three-piece bearings. An outer band holds the balls inside the raceway, keeping lubricant in and dirt out.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

	OD	Thk.	Cage Material	Dynamic Thrust Load Cap., lb.	Max. Rotation Speed, rpm	Temp. Range, ° F		Each
Steel



	5/16"	11/16"	5/16"	Steel	600	1,500	-40 to 245	60715K111	000000


	3/8"	1 3/16"	1/2"	Steel	1,700	1,500	-40 to 245	60715K112	00000
	1/2"	1 7/32"	9/16"	Steel	3,850	7,000	-40 to 245	60715K11	00000
	9/16"	1 7/32"	9/16"	Steel	3,850	7,000	-40 to 245	60715K35	00000
	5/8"	1 11/32"	9/16"	Steel	4,100	6,000	-40 to 245	60715K12	00000
	11/16"	1 11/32"	9/16"	Steel	4,100	6,000	-40 to 245	60715K36	00000
	3/4"	1 15/32"	9/16"	Steel	4,250	5,500	-40 to 245	60715K13	00000
	13/16"	1 15/32"	9/16"	Steel	4,250	5,500	-40 to 245	60715K37	00000
	7/8"	1 27/32"	5/8"	Steel	6,600	4,100	-40 to 245	60715K14	00000
	15/16"	1 27/32"	5/8"	Steel	6,600	4,100	-40 to 245	60715K38	00000
	1"	1 31/32"	5/8"	Steel	6,700	3,800	-40 to 245	60715K15	00000


	1 1/16"	1 31/32"	5/8"	Steel	6,700	3,800	-40 to 245	60715K39	00000
	1 1/8"	2 3/32"	5/8"	Steel	6,900	3,600	-40 to 245	60715K16	00000
	1 3/16"	2 3/32"	5/8"	Steel	6,900	3,600	-40 to 245	60715K41	00000
	1 1/4"	2 11/32"	5/8"	Steel	7,200	3,200	-40 to 245	60715K27	00000
	1 3/8"	2 15/32"	5/8"	Steel	7,300	3,000	-40 to 245	60715K28	00000
	1 7/16"	2 15/32"	5/8"	Steel	7,300	3,000	-40 to 245	60715K43	00000
	1 1/2"	2 19/32"	5/8"	Steel	7,700	2,800	-40 to 245	60715K29	00000
	1 9/16"	2 19/32"	5/8"	Steel	7,700	2,800	-40 to 245	60715K44	00000
	1 5/8"	2 31/32"	13/16"	Steel	10,300	2,400	-40 to 245	60715K31	00000
	1 11/16"	2 31/32"	13/16"	Steel	10,300	2,400	-40 to 245	60715K45	00000


	1 3/4"	3 3/32"	13/16"	Steel	10,600	2,300	-40 to 245	60715K32	00000
	1 13/16"	3 3/32"	13/16"	Steel	10,600	2,300	-40 to 245	60715K46	00000
	1 7/8"	3 7/32"	13/16"	Steel	10,800	2,200	-40 to 245	60715K33	00000
	1 15/16"	3 7/32"	13/16"	Steel	10,800	2,200	-40 to 245	60715K47	00000
	2"	3 11/32"	13/16"	Steel	10,800	2,100	-40 to 245	60715K34	00000
	2 1/16"	3 11/32"	13/16"	Steel	10,800	2,100	-40 to 245	60715K48	00000
	2 1/8"	3 19/32"	13/16"	Steel	11,100	2,000	-40 to 245	60715K49	000000
	2 1/4"	3 23/32"	13/16"	Steel	11,200	1,900	-40 to 245	60715K51	00000
	2 1/2"	3 31/32"	13/16"	Steel	11,500	1,800	-40 to 245	60715K52	00000
	2 3/4"	4 15/32"	1"	Steel	18,200	1,600	-40 to 245	60715K53	000000


	3 1/4"	4 31/32"	1"	Steel	18,800	1,500	-40 to 245	60715K54	000000
	3 1/2"	5 7/32"	1"	Steel	19,200	1,400	-40 to 245	60715K55	000000
	One-Piece Thrust Ball Bearing, Shielded, for 3-1/2" Shaft Diameter, 5-7/32" OD Product Detail QuantityEachIn stock Select a compatible file type: Parasolid Compatible Products for This Thrust Bearing

Dry-Running Thrust Bearings

Made of naturally slippery plastic so there's no lubricant to maintain or make a mess. These bearings are ideal for spic-and-span spaces since oil won't drip off, wash out, or collect dust over time. They'll also never rust.

Nylon—A balance of wear resistance and slipperiness. These bearings are best for dry environments since they swell and weaken when exposed to moisture.

Moisture-Resistant Acetal—Won't warp or swell from water or humidity.

Moisture-Resistant Plastic Blend—Similar to acetal, these bearings won't warp or swell from water or humidity.

Ultra-Chemical-Resistant PTFE—The most chemical-resistant bearings we offer. PTFE is immune to harsh chemicals, including all strong acids and bases. It's also one of the slipperiest types of plastic, but it's not very strong.

High-Load PEEK—Our strongest all-plastic bearings. PEEK also resists a range of harsh chemicals, including most acids and bases.

High-Load Moisture-Resistant Rulon LR—Similar to acetal, these bearings won’t swell from water or humidity, plus they support higher loads.

Ultra-Low-Friction Rulon J—These bearings glide effortlessly on machines with frequent starts and stops, such as conveyors. They're also stronger than PTFE bearings.

	For Shaft Dia.	OD	Thk.	Dynamic Thrust Load Cap. @ Speed	Color	Temp. Range, ° F		Each
Nylon



		3/16"	3/8"	1/16"	20 lb. @ 120 rpm	White	-20 to 210	2797T101	00000


		1/4"	7/16"	1/16"	20 lb. @ 120 rpm	White	-20 to 210	2797T102	0000
		1/4"	1/2"	1/16"	27 lb. @ 120 rpm	White	-20 to 210	2797T103	0000
		1/4"	5/8"	1/16"	39 lb. @ 120 rpm	White	-20 to 210	2797T1	0000
		5/16"	5/8"	1/16"	34 lb. @ 120 rpm	White	-20 to 210	2797T104	0000
		5/16"	3/4"	1/16"	45 lb. @ 120 rpm	White	-20 to 210	2797T105	0000
		3/8"	5/8"	1/16"	29 lb. @ 120 rpm	White	-20 to 210	2797T106	0000
		3/8"	3/4"	1/32"	41 lb. @ 120 rpm	White	-20 to 210	2797T107	0000
		3/8"	3/4"	1/16"	42 lb. @ 120 rpm	White	-20 to 210	2797T2	0000
		3/8"	3/4"	1/8"	41 lb. @ 120 rpm	White	-20 to 210	2797T108	0000
		7/16"	3/4"	1/16"	36 lb. @ 120 rpm	White	-20 to 210	2797T109	0000


		1/2"	3/4"	1/16"	30 lb. @ 120 rpm	White	-20 to 210	2797T111	0000
		1/2"	7/8"	3/16"	43 lb. @ 120 rpm	White	-20 to 210	2797T112	0000
		1/2"	1"	1/16"	55 lb. @ 120 rpm	White	-20 to 210	2797T3	0000
		1/2"	1"	3/32"	110 lb. @ 60 rpm	White	-20 to 210	2797T113	0000
		1/2"	1"	1/8"	110 lb. @ 60 rpm	White	-20 to 210	2797T114	0000
		5/8"	1"	1/16"	90 lb. @ 60 rpm	White	-20 to 210	2797T115	0000
		5/8"	1"	1/8"	90 lb. @ 60 rpm	White	-20 to 210	2797T116	0000
		3/4"	1 1/4"	1/16"	115 lb. @ 60 rpm	White	-20 to 210	2797T117	00000
		3/4"	1 1/4"	1/8"	115 lb. @ 60 rpm	White	-20 to 210	2797T118	00000
		3/4"	1 3/8"	1/8"	140 lb. @ 60 rpm	White	-20 to 210	2797T4	00000


		3/4"	1 3/4"	1/8"	210 lb. @ 60 rpm	White	-20 to 210	2797T119	00000
		7/8"	1 1/2"	1/8"	145 lb. @ 60 rpm	White	-20 to 210	2797T121	00000
		1"	1 1/2"	1/8"	120 lb. @ 60 rpm	White	-20 to 210	2797T122	00000
		1"	2"	1/8"	225 lb. @ 60 rpm	White	-20 to 210	2797T5	00000
		1 1/4"	2"	1/8"	180 lb. @ 30 rpm	White	-20 to 210	2797T123	00000
		1 1/2"	3"	1/8"	670 lb. @ 30 rpm	White	-20 to 210	2797T6	00000
		1 3/4"	2 5/8"	1/8"	300 lb. @ 30 rpm	White	-20 to 210	2797T124	00000
		2"	3"	1/8"	240 lb. @ 30 rpm	White	-20 to 210	2797T125	00000
		6 mm	12 mm	1.5 mm	26 lb. @ 120 rpm	White	-20 to 210	2797T126	0000
		8 mm	16 mm	1.5 mm	35 lb. @ 120 rpm	White	-20 to 210	2797T127	0000


		10 mm	18 mm	1.5 mm	36 lb. @ 120 rpm	White	-20 to 210	2797T128	0000
		12 mm	24 mm	2 mm	105 lb. @ 60 rpm	White	-20 to 210	2797T129	0000
		16 mm	32 mm	2 mm	140 lb. @ 60 rpm	White	-20 to 210	2797T131	00000
		20 mm	40 mm	2 mm	175 lb. @ 60 rpm	White	-20 to 210	2797T132	00000


		Moisture-Resistant Acetal



				3/16"	3/8"	1/16"	18 lb. @ 120 rpm	White	-40 to 180	2795T201	0000


				1/4"	7/16"	1/16"	19 lb. @ 120 rpm	White	-40 to 180	2795T202	0000
				1/4"	1/2"	1/16"	24 lb. @ 120 rpm	White	-40 to 180	2795T203	0000
				1/4"	5/8"	1/16"	35 lb. @ 120 rpm	White	-40 to 180	2795T11	0000
				5/16"	5/8"	1/16"	31 lb. @ 120 rpm	White	-40 to 180	2795T204	0000
				5/16"	3/4"	1/16"	41 lb. @ 120 rpm	White	-40 to 180	2795T205	0000
				3/8"	5/8"	1/16"	26 lb. @ 120 rpm	White	-40 to 180	2795T206	0000
				3/8"	3/4"	1/32"	37 lb. @ 120 rpm	White	-40 to 180	2795T207	0000
				3/8"	3/4"	1/16"	37 lb. @ 120 rpm	White	-40 to 180	2795T12	0000
				3/8"	3/4"	1/8"	37 lb. @ 120 rpm	White	-40 to 180	2795T208	0000
7/16"				3/4"	1/16"	33 lb. @ 120 rpm	White	-40 to 180	2795T209	0000


1/2"	3/4"			1/16"	27 lb. @ 120 rpm	White	-40 to 180	2795T211	0000
1/2"	7/8"			3/16"	38 lb. @ 120 rpm	White	-40 to 180	2795T212	0000
1/2"	1"			1/16"	50 lb. @ 120 rpm	White	-40 to 180	2795T13	0000
1/2"	1"			3/32"	49 lb. @ 60 rpm	White	-40 to 180	2795T213	0000
1/2"	1"			1/8"	49 lb. @ 60 rpm	White	-40 to 180	2795T214	0000
5/8"	1"			1/16"	40 lb. @ 60 rpm	White	-40 to 180	2795T215	0000
5/8"	1"			1/8"	40 lb. @ 60 rpm	White	-40 to 180	2795T216	0000
3/4"	1 1/4"			1/16"	53 lb. @ 60 rpm	White	-40 to 180	2795T217	00000
3/4"	1 1/4"			1/8"	53 lb. @ 60 rpm	White	-40 to 180	2795T218	00000
3/4"	1 3/8"			1/8"	130 lb. @ 60 rpm	White	-40 to 180	2795T14	00000


3/4"	1 3/4"			1/8"	95 lb. @ 60 rpm	White	-40 to 180	2795T219	00000
7/8"	1 1/2"			1/8"	65 lb. @ 60 rpm	White	-40 to 180	2795T221	00000
1"	1 1/2"			1/8"	55 lb. @ 60 rpm	White	-40 to 180	2795T222	00000
1"	2"			1/8"	200 lb. @ 60 rpm	White	-40 to 180	2795T15	00000
1 1/4"	2"			1/8"	320 lb. @ 30 rpm	White	-40 to 180	2795T223	00000
1 1/2"	3"			1/8"	600 lb. @ 30 rpm	White	-40 to 180	2795T16	00000
1 3/4"	2 5/8"			1/8"	380 lb. @ 30 rpm	White	-40 to 180	2795T224	00000
2"	3"			1/8"	440 lb. @ 30 rpm	White	-40 to 180	2795T225	00000
6 mm	12 mm			1.5 mm	21 lb. @ 120 rpm	White	-40 to 180	2795T226	0000
8 mm	16 mm			1.5 mm	31 lb. @ 120 rpm	White	-40 to 180	2795T227	0000


10 mm	18 mm			1.5 mm	33 lb. @ 120 rpm	White	-40 to 180	2795T228	0000
12 mm	24 mm			2 mm	46 lb. @ 120 rpm	White	-40 to 180	2795T229	0000
16 mm	32 mm			2 mm	125 lb. @ 60 rpm	White	-40 to 180	2795T231	00000
20 mm	40 mm			2 mm	155 lb. @ 60 rpm	White	-40 to 180	2795T232	00000


Moisture-Resistant Plastic Blend



				3/8"	5/8"	0.04"	21 lb. @ 120 rpm	Gray	-40 to 260	8920N11	0000


				1/2"	7/8"	0.0585"	43 lb. @ 120 rpm	Gray	-40 to 260	8920N12	0000
				5/8"	1 1/8"	0.0585"	70 lb. @ 60 rpm	Gray	-40 to 260	8920N13	0000
				3/4"	1 1/4"	0.0585"	80 lb. @ 60 rpm	Gray	-40 to 260	8920N14	0000
				7/8"	1 1/2"	0.0585"	125 lb. @ 60 rpm	Gray	-40 to 260	8920N15	0000
				1"	1 3/4"	0.0585"	170 lb. @ 60 rpm	Gray	-40 to 260	8920N16	0000
				1 1/4"	2 1/8"	0.0585"	250 lb. @ 30 rpm	Gray	-40 to 260	8920N17	0000
				1 1/2"	2 1/2"	0.0585"	330 lb. @ 30 rpm	Gray	-40 to 260	8920N18	00000
				1 3/4"	2 3/4"	0.0585"	380 lb. @ 30 rpm	Gray	-40 to 260	8920N19	00000
				2"	3"	0.0895"	420 lb. @ 30 rpm	Gray	-40 to 260	8920N21	00000
				4 mm	8 mm	0.5 mm	6 lb. @ 120 rpm	Gray	-40 to 260	8920N22	0000


		4 mm	9 mm	0.6 mm	8.5 lb. @ 120 rpm	Gray	-40 to 260	8920N23	0000
		4 mm	10 mm	0.5 mm	11 lb. @ 120 rpm	Gray	-40 to 260	8920N24	0000
		4 mm	11 mm	0.5 mm	13 lb. @ 120 rpm	Gray	-40 to 260	8920N25	0000
		5 mm	9.5 mm	0.6 mm	8.5 lb. @ 120 rpm	Gray	-40 to 260	8920N26	0000
		5 mm	12 mm	1 mm	15 lb. @ 120 rpm	Gray	-40 to 260	8920N27	0000
		6 mm	11 mm	1 mm	11 lb. @ 120 rpm	Gray	-40 to 260	8920N28	0000
		6 mm	12 mm	1.5 mm	14 lb. @ 120 rpm	Gray	-40 to 260	8920N29	0000
		6 mm	15 mm	1.5 mm	24 lb. @ 120 rpm	Gray	-40 to 260	8920N31	0000
		6 mm	20 mm	1.5 mm	47 lb. @ 120 rpm	Gray	-40 to 260	8920N32	0000
		7 mm	12 mm	0.5 mm	12 lb. @ 120 rpm	Gray	-40 to 260	8920N33	0000


		8 mm	15 mm	0.5 mm	21 lb. @ 120 rpm	Gray	-40 to 260	8920N35	0000
		8 mm	15 mm	1.5 mm	21 lb. @ 120 rpm	Gray	-40 to 260	8920N36	0000
		8 mm	18 mm	1.5 mm	34 lb. @ 120 rpm	Gray	-40 to 260	8920N37	0000
		8 mm	18 mm	2 mm	34 lb. @ 120 rpm	Gray	-40 to 260	8920N38	0000
		8 mm	25 mm	1.5 mm	70 lb. @ 120 rpm	Gray	-40 to 260	8920N39	0000
		9 mm	18 mm	1.5 mm	31 lb. @ 120 rpm	Gray	-40 to 260	8920N41	0000
		10 mm	17.8 mm	0.5 mm	28 lb. @ 120 rpm	Gray	-40 to 260	8920N43	0000
		10 mm	18 mm	1 mm	29 lb. @ 120 rpm	Gray	-40 to 260	8920N44	0000
		10 mm	18 mm	1.5 mm	29 lb. @ 120 rpm	Gray	-40 to 260	8920N45	0000
		10 mm	18 mm	2 mm	29 lb. @ 120 rpm	Gray	-40 to 260	8920N46	0000


		10 mm	20 mm	1.5 mm	39 lb. @ 120 rpm	Gray	-40 to 260	8920N47	0000
		11 mm	15 mm	1 mm	13 lb. @ 120 rpm	Gray	-40 to 260	8920N48	0000
		11 mm	27 mm	0.5 mm	75 lb. @ 120 rpm	Gray	-40 to 260	8920N49	0000
		12 mm	20 mm	0.5 mm	33 lb. @ 120 rpm	Gray	-40 to 260	8920N51	0000
		12 mm	20 mm	1 mm	33 lb. @ 120 rpm	Gray	-40 to 260	8920N52	0000
		12 mm	24 mm	1.5 mm	55 lb. @ 120 rpm	Gray	-40 to 260	8920N53	0000
		12.2 mm	30 mm	1.5 mm	95 lb. @ 120 rpm	Gray	-40 to 260	8920N54	0000
		14 mm	22 mm	1 mm	37 lb. @ 60 rpm	Gray	-40 to 260	8920N56	0000
		14 mm	26 mm	1.5 mm	60 lb. @ 60 rpm	Gray	-40 to 260	8920N57	0000
		15 mm	19 mm	0.8 mm	17 lb. @ 60 rpm	Gray	-40 to 260	8920N58	0000


		15 mm	22 mm	0.8 mm	34 lb. @ 60 rpm	Gray	-40 to 260	8920N59	0000
		15 mm	24 mm	1.5 mm	46 lb. @ 60 rpm	Gray	-40 to 260	8920N61	0000
		16 mm	28 mm	1 mm	65 lb. @ 60 rpm	Gray	-40 to 260	8920N63	0000
		18 mm	32 mm	1.5 mm	90 lb. @ 60 rpm	Gray	-40 to 260	8920N64	0000
		20 mm	36 mm	1.5 mm	115 lb. @ 60 rpm	Gray	-40 to 260	8920N65	0000
		22 mm	30 mm	1.5 mm	50 lb. @ 60 rpm	Gray	-40 to 260	8920N66	0000
		22 mm	38 mm	1.5 mm	125 lb. @ 60 rpm	Gray	-40 to 260	8920N67	0000
		26 mm	44 mm	1.5 mm	165 lb. @ 30 rpm	Gray	-40 to 260	8920N69	0000
		28 mm	48 mm	1.5 mm	195 lb. @ 30 rpm	Gray	-40 to 260	8920N71	0000
		32 mm	54 mm	1.5 mm	245 lb. @ 30 rpm	Gray	-40 to 260	8920N72	0000

40 mm	60 mm	3.5 mm	260 lb. @ 30 rpm	Gray	-40 to 260	8920N74	00000
48 mm	60 mm	2 mm	170 lb. @ 30 rpm	Gray	-40 to 260	8920N77	00000
78 mm	114 mm	1.5 mm	900 lb. @ 30 rpm	Gray	-40 to 260	8920N83	00000

Ultra-Chemical-Resistant PTFE



		1/4"	5/8"	1/16"	13 lb. @ 120 rpm	White	-350 to 500	2796T11	0000


		3/8"	3/4"	1/16"	14 lb. @ 120 rpm	White	-350 to 500	2796T12	0000
		1/2"	1"	1/16"	18 lb. @ 120 rpm	White	-350 to 500	2796T13	0000
		3/4"	1 3/8"	1/8"	48 lb. @ 60 rpm	White	-350 to 500	2796T14	00000
		1"	2"	1/8"	75 lb. @ 60 rpm	White	-350 to 500	2796T15	00000
		1 1/2"	3"	1/8"	225 lb. @ 30 rpm	White	-350 to 500	2796T16	00000
		6 mm	11.8 mm	1.5 mm	2 lb. @ 120 rpm	White	-450 to 500	2796T17	00000
		8 mm	15.8 mm	1.5 mm	3.5 lb. @ 120 rpm	White	-450 to 500	2796T18	00000
		10 mm	17.8 mm	1.5 mm	4.5 lb. @ 120 rpm	White	-450 to 500	2796T19	00000
		10 mm	17.8 mm	2 mm	4.5 lb. @ 120 rpm	White	-450 to 500	2796T21	00000
		12 mm	23.7 mm	2 mm	9 lb. @ 120 rpm	White	-450 to 500	2796T22	00000


		12 mm	23.7 mm	3 mm	9 lb. @ 120 rpm	White	-450 to 500	2796T23	00000
		14 mm	27.7 mm	2 mm	12 lb. @ 60 rpm	White	-450 to 500	2796T24	00000
		15 mm	30.7 mm	2 mm	15 lb. @ 60 rpm	White	-450 to 500	2796T25	00000
		16 mm	31.6 mm	2 mm	16 lb. @ 60 rpm	White	-450 to 500	2796T27	00000
		16 mm	31.6 mm	3 mm	16 lb. @ 60 rpm	White	-450 to 500	2796T28	00000
		16 mm	31.6 mm	4 mm	16 lb. @ 60 rpm	White	-450 to 500	2796T29	00000
		20 mm	39.6 mm	2 mm	25 lb. @ 60 rpm	White	-450 to 500	2796T33	00000
		20 mm	39.6 mm	3 mm	25 lb. @ 60 rpm	White	-450 to 500	2796T34	00000


		High-Load PEEK



				1/4"	5/8"	1/16"	320 lb. @ 120 rpm	Black	-40 to 500	1252N1	0000


				3/8"	3/4"	1/16"	350 lb. @ 120 rpm	Black	-40 to 500	1252N2	0000
				1/2"	1"	1/16"	460 lb. @ 120 rpm	Black	-40 to 500	1252N3	00000
				3/4"	1 3/8"	1/8"	1,200 lb. @ 60 rpm	Black	-40 to 500	1252N4	00000
				1"	2"	1/8"	1,850 lb. @ 60 rpm	Black	-40 to 500	1252N5	00000


				High-Load Moisture-Resistant Rulon LR



						1/4"	5/8"	1/16"	130 lb. @ 120 rpm	Maroon	-400 to 550	7532K11	0000


						3/8"	3/4"	1/16"	140 lb. @ 120 rpm	Maroon	-400 to 550	7532K12	0000
						3/8"	3/4"	1/8"	135 lb. @ 120 rpm	Maroon	-400 to 550	7532K51	0000
						1/2"	3/4"	1/16"	100 lb. @ 120 rpm	Maroon	-400 to 550	7532K52	0000
						1/2"	1"	1/16"	185 lb. @ 120 rpm	Maroon	-400 to 550	7532K13	0000
						1/2"	1"	3/32"	185 lb. @ 120 rpm	Maroon	-400 to 550	7532K53	00000
						1/2"	1"	1/8"	185 lb. @ 120 rpm	Maroon	-400 to 550	7532K54	00000
						5/8"	1"	1/16"	300 lb. @ 60 rpm	Maroon	-400 to 550	7532K55	00000
						5/8"	1"	1/8"	300 lb. @ 60 rpm	Maroon	-400 to 550	7532K56	00000
						5/8"	1 3/16"	1/8"	420 lb. @ 60 rpm	Maroon	-400 to 550	7532K57	00000
						5/8"	1 1/4"	1/16"	460 lb. @ 60 rpm	Maroon	-400 to 550	7532K58	00000


						3/4"	1 1/4"	1/16"	390 lb. @ 60 rpm	Maroon	-400 to 550	7532K59	00000
						3/4"	1 1/4"	1/8"	390 lb. @ 60 rpm	Maroon	-400 to 550	7532K61	00000
						3/4"	1 3/8"	1/8"	480 lb. @ 60 rpm	Maroon	-400 to 550	7532K14	00000
						3/4"	1 3/4"	1/8"	710 lb. @ 60 rpm	Maroon	-400 to 550	7532K63	00000
1"						1 1/2"	1/16"	410 lb. @ 60 rpm	Maroon	-400 to 550	7532K66	00000
1"	1 1/2"					1/8"	410 lb. @ 60 rpm	Maroon	-400 to 550	7532K67	00000
1"	2"					1/8"	750 lb. @ 60 rpm	Maroon	-400 to 550	7532K15	00000
1 1/4"	2"					1/16"	1,200 lb. @ 30 rpm	Maroon	-400 to 550	7532K68	00000
1 1/4"	2"					1/8"	1,200 lb. @ 30 rpm	Maroon	-400 to 550	7532K69	00000
1 1/2"	3"					1/8"	2,250 lb. @ 30 rpm	Maroon	-400 to 550	7532K16	00000


2"	3"					1/8"	1,650 lb. @ 30 rpm	Maroon	-400 to 550	7532K72	000000
6 mm	12.8 mm					0.8 mm	95 lb. @ 120 rpm	Maroon	-400 to 550	7532K81	0000
8 mm	14.8 mm					0.8 mm	100 lb. @ 120 rpm	Maroon	-400 to 550	7532K82	0000
10 mm	19.8 mm					0.8 mm	140 lb. @ 120 rpm	Maroon	-400 to 550	7532K83	0000
12 mm	24.7 mm					0.8 mm	180 lb. @ 120 rpm	Maroon	-400 to 550	7532K84	00000


Ultra-Low-Friction Rulon J



						1/4"	5/8"	1/16"	95 lb. @ 120 rpm	Gold	-400 to 550	7488K11	0000


						3/8"	3/4"	1/16"	105 lb. @ 120 rpm	Gold	-400 to 550	7488K12	0000
						1/2"	1"	1/16"	140 lb. @ 120 rpm	Gold	-400 to 550	7488K13	0000
						3/4"	1 3/8"	1/8"	360 lb. @ 60 rpm	Gold	-400 to 550	7488K14	00000
						1"	2"	1/8"	560 lb. @ 60 rpm	Gold	-400 to 550	7488K15	00000
						1 1/2"	3"	1/8"	1,650 lb. @ 30 rpm	Gold	-400 to 550	7488K16	00000
						6 mm	11.8 mm	1.5 mm	60 lb. @ 120 rpm	Gold	-400 to 550	7488K17	00000
						8 mm	15.8 mm	1.5 mm	85 lb. @ 120 rpm	Gold	-400 to 550	7488K18	00000
						10 mm	17.8 mm	1.5 mm	85 lb. @ 120 rpm	Gold	-400 to 550	7488K19	00000
		10 mm				17.8 mm	2 mm	85 lb. @ 120 rpm	Gold	-400 to 550	7488K21	00000
		12 mm	23.7 mm			2 mm	125 lb. @ 120 rpm	Gold	-400 to 550	7488K22	00000

Ultra-Low-Friction Oil-Embedded Thrust Bearings

Our slipperiest metal thrust bearings glide on machines with frequent starts and stops, such as conveyors. Their oil contains nonstick PTFE particles that reduce wear and heat, extending the life of your equipment. All are fabricated, lubricated, and inspected in the U.S.

841 Bearing Bronze—A balance of strength and speed makes these bearings a good choice for most applications. Also known as SAE 841 bearing bronze.

	For Shaft Dia.	OD	Thk.	Dynamic Thrust Load Cap. @ Speed	Base Oil	Lubricant Additive	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



		3/16"	3/8"	1/16"	160 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K101	000000


		1/4"	7/16"	1/16"	200 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K102	0000
		1/4"	1/2"	1/16"	290 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K103	0000
		1/4"	5/8"	1/16"	510 lb. @ 120 rpm	Synthetic Oil	PTFE	-35 to 270	—	7421K1	0000
		5/16"	5/8"	1/16"	460 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K104	0000
		5/16"	3/4"	1/16"	730 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K105	0000
		3/8"	5/8"	1/16"	390 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K106	0000
		3/8"	3/4"	1/32"	650 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K107	0000
		3/8"	3/4"	1/16"	660 lb. @ 120 rpm	Synthetic Oil	PTFE	-35 to 270	—	7421K2	0000
		3/8"	3/4"	1/8"	660 lb. @ 120 rpm	Synthetic Oil	PTFE	-35 to 270	—	7421K3	0000
		7/16"	3/4"	1/16"	580 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K108	0000


		1/2"	3/4"	1/16"	490 lb. @ 120 rpm	Synthetic Oil	PTFE	-35 to 270	—	7421K4	0000
		1/2"	7/8"	3/16"	730 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K109	0000
		1/2"	1"	1/16"	930 lb. @ 120 rpm	Synthetic Oil	PTFE	-35 to 270	—	7421K5	0000
		1/2"	1"	3/32"	930 lb. @ 120 rpm	Synthetic Oil	PTFE	-35 to 270	—	7421K6	0000
		1/2"	1"	1/8"	930 lb. @ 120 rpm	Synthetic Oil	PTFE	-35 to 270	—	7421K7	0000
		9/16"	1 1/4"	1/16"	1,950 lb. @ 60 rpm	Synthetic Oil	PTFE	-35 to 270	—	7421K8	0000
		9/16"	1 1/4"	1/8"	1,950 lb. @ 60 rpm	Synthetic Oil	PTFE	-35 to 270	—	7421K9	0000
		5/8"	1"	1/16"	950 lb. @ 60 rpm	Synthetic Oil	PTFE	-35 to 270	—	7421K11	0000
		5/8"	1"	1/8"	950 lb. @ 60 rpm	Synthetic Oil	PTFE	-35 to 270	—	7421K12	0000
		5/8"	1 3/16"	1/16"	1,600 lb. @ 60 rpm	Synthetic Oil	PTFE	-35 to 270	—	7421K13	0000


		5/8"	1 3/16"	3/32"	1,600 lb. @ 60 rpm	Synthetic Oil	PTFE	-35 to 270	—	7421K14	0000
		5/8"	1 3/16"	1/8"	1,600 lb. @ 60 rpm	Synthetic Oil	PTFE	-35 to 270	—	7421K15	0000
		5/8"	1 1/4"	1/16"	1,800 lb. @ 60 rpm	Synthetic Oil	PTFE	-35 to 270	—	7421K16	0000
		5/8"	1 1/4"	1/8"	1,800 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K111	0000
		5/8"	1 1/2"	1/16"	2,900 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K112	0000
		5/8"	1 1/2"	1/8"	2,900 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K113	00000
		3/4"	1 1/4"	1/16"	1,550 lb. @ 60 rpm	Synthetic Oil	PTFE	-35 to 270	—	7421K17	0000
		3/4"	1 1/4"	1/8"	1,550 lb. @ 60 rpm	Synthetic Oil	PTFE	-35 to 270	—	7421K18	0000
		3/4"	1 3/8"	1/16"	2,050 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K114	0000
		3/4"	1 3/8"	1/8"	2,050 lb. @ 60 rpm	Synthetic Oil	PTFE	-35 to 270	—	7421K19	0000


		3/4"	1 3/8"	1/4"	2,050 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K115	00000
		3/4"	1 9/16"	3/32"	2,950 lb. @ 60 rpm	Synthetic Oil	PTFE	-35 to 270	—	7421K21	0000
		3/4"	1 3/4"	1/8"	3,550 lb. @ 60 rpm	Synthetic Oil	PTFE	-35 to 270	—	7421K22	0000
		7/8"	1 1/2"	1/16"	2,300 lb. @ 60 rpm	Synthetic Oil	PTFE	-35 to 270	—	7421K23	0000
		7/8"	1 1/2"	1/8"	2,300 lb. @ 60 rpm	Synthetic Oil	PTFE	-35 to 270	—	7421K24	0000
		7/8"	2"	1/8"	4,000 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K116	00000
		1"	1 1/2"	1/16"	1,950 lb. @ 60 rpm	Synthetic Oil	PTFE	-35 to 270	—	7421K25	0000
		1"	1 1/2"	1/8"	1,950 lb. @ 60 rpm	Synthetic Oil	PTFE	-35 to 270	—	7421K26	0000
		1"	1 1/2"	3/16"	1,950 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K117	0000
		1"	1 5/8"	1/16"	2,450 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K118	0000


		1"	1 5/8"	1/8"	2,450 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K119	0000
		1"	1 5/8"	1/4"	2,450 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K121	00000
		1"	1 3/4"	1/16"	2,900 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K122	0000
		1"	1 3/4"	1/8"	2,900 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K123	00000
		1"	2"	1/8"	3,750 lb. @ 60 rpm	Synthetic Oil	PTFE	-35 to 270	—	7421K27	0000
		1"	2"	3/16"	3,750 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K124	00000
		1"	2 7/8"	1/8"	6,300 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K125	00000
		1 1/16"	2 3/8"	1/16"	7,050 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K126	00000
		1 1/16"	2 3/8"	1/8"	7,050 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K127	00000
		1 1/8"	1 7/8"	1/8"	3,500 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K128	00000

1 1/4"	1 11/16"	1/8"	2,000 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K129	00000
1 1/4"	2"	1/16"	3,800 lb. @ 30 rpm	Synthetic Oil	PTFE	-35 to 270	—	7421K28	0000
1 1/4"	2"	1/8"	3,800 lb. @ 30 rpm	Synthetic Oil	PTFE	-35 to 270	—	7421K29	0000
1 1/4"	2 3/8"	1/8"	6,400 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K131	00000
1 3/8"	1 15/16"	1/8"	2,900 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K132	00000
1 1/2"	2"	1/8"	2,700 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K133	00000
1 1/2"	2 1/2"	1/8"	6,250 lb. @ 30 rpm	Synthetic Oil	PTFE	-35 to 270	—	7421K31	0000
1 1/2"	3 1/2"	3/16"	14,250 lb. @ 30 rpm	Synthetic Oil	PTFE	-35 to 270	—	7421K32	00000
1 3/4"	2 5/8"	1/8"	6,000 lb. @ 30 rpm	Synthetic Oil	PTFE	-35 to 270	—	7421K33	0000
2"	3"	1/8"	7,850 lb. @ 30 rpm	Synthetic Oil	PTFE	-35 to 270	—	7421K34	0000
2 1/4"	4 1/2"	1/8"	16,500 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K134	00000
2 1/2"	3 1/4"	1/8"	6,600 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K135	00000
2 3/4"	3 7/8"	1/4"	9,800 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K136	00000
3"	4 1/2"	1/8"	12,200 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K137	00000
6 mm	12 mm	1.5 mm	260 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K42	0000
8 mm	16 mm	1.5 mm	460 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K43	0000
10 mm	18 mm	1.5 mm	540 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K45	0000
10 mm	18 mm	2 mm	540 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K44	0000
12 mm	24 mm	2 mm	880 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K46	0000
12 mm	24 mm	3 mm	880 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K47	0000
14 mm	28 mm	2 mm	1,400 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K48	0000
15 mm	30 mm	2 mm	1,600 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K49	0000
15 mm	30 mm	3 mm	1,600 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K51	0000
16 mm	32 mm	2 mm	1,850 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K52	0000
16 mm	32 mm	3 mm	1,850 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K53	0000
18 mm	36 mm	2 mm	2,350 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K54	0000
18 mm	36 mm	3 mm	2,350 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K55	0000
20 mm	40 mm	2 mm	2,900 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K56	0000
20 mm	40 mm	3 mm	2,900 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K57	0000
24 mm	48 mm	3 mm	3,500 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K58	0000
24 mm	48 mm	4 mm	3,500 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K59	00000
25 mm	50 mm	3 mm	3,650 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K61	0000
25 mm	50 mm	4 mm	3,650 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K62	00000
30 mm	60 mm	4 mm	6,550 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K63	00000
30 mm	60 mm	5 mm	6,550 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K64	00000
35 mm	60 mm	4 mm	7,700 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K138	00000
40 mm	60 mm	4 mm	4,850 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	7421K65	00000

High-Load 863 Iron Copper



		3/16"	3/8"	1/16"	240 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N111	00000


		1/4"	1/2"	1/16"	320 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N112	0000
		1/4"	5/8"	1/16"	450 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N113	0000
		5/16"	5/8"	1/16"	400 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N114	0000
		5/16"	3/4"	1/16"	530 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N115	0000
		3/8"	5/8"	1/16"	330 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N116	0000
		3/8"	3/4"	1/32"	470 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N117	0000
		3/8"	3/4"	1/16"	470 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N118	0000
		3/8"	3/4"	1/8"	470 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N119	0000
		7/16"	3/4"	1/16"	420 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N121	0000
		1/2"	3/4"	1/16"	350 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N122	0000


		1/2"	7/8"	3/16"	500 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N123	0000
		1/2"	1"	1/16"	1,300 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N124	0000
		1/2"	1"	3/32"	1,300 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N125	0000
		1/2"	1"	1/8"	1,300 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N126	0000
		9/16"	1 1/4"	1/16"	1,700 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N127	0000
		9/16"	1 1/4"	1/8"	1,700 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N128	0000
		5/8"	1"	1/16"	1,050 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N129	0000
		5/8"	1"	1/8"	1,050 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N131	0000
		5/8"	1 3/16"	1/8"	1,480 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N132	0000
		5/8"	1 1/4"	1/16"	1,600 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N133	0000


		5/8"	1 1/4"	1/8"	1,600 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N134	0000
		5/8"	1 1/2"	1/8"	2,100 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N135	0000
		11/16"	1 1/4"	1/16"	1,500 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N136	00000
		3/4"	1 1/4"	1/16"	1,380 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N137	0000
		3/4"	1 1/4"	1/8"	1,380 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N138	0000
		3/4"	1 3/8"	1/16"	1,650 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N139	0000
		3/4"	1 3/8"	1/8"	1,650 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N141	0000
		3/4"	1 3/8"	1/4"	1,650 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N142	0000
		3/4"	1 9/16"	3/32"	2,100 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N143	0000
		3/4"	1 3/4"	1/8"	2,450 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N144	0000


		13/16"	1 1/4"	1/8"	1,850 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N145	00000
		7/8"	1 1/2"	1/16"	1,700 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N146	0000
		7/8"	1 1/2"	1/8"	1,700 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N147	0000
		15/16"	1 1/8"	1/8"	1,550 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N148	00000
		1"	1 1/2"	1/16"	1,430 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N149	0000
		1"	1 1/2"	1/8"	1,430 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N151	0000
		1"	1 3/4"	1/16"	2,000 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N152	0000
		1"	1 3/4"	1/8"	2,000 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N153	0000
		1"	2"	1/8"	5,200 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N154	0000
		1"	2"	3/16"	5,200 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N155	0000


		1"	2 7/8"	1/8"	8,700 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N156	00000
		1 1/8"	1 7/8"	1/8"	4,100 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N157	00000
		1 1/4"	2"	1/16"	4,200 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N158	0000
		1 1/4"	2"	1/8"	4,200 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N159	0000
		1 1/4"	2 3/8"	1/8"	5,900 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N161	0000
		1 1/2"	2"	1/8"	3,000 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N162	0000
		1 1/2"	2 1/2"	1/8"	5,500 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N163	00000
		1 1/2"	3 1/2"	3/16"	7,800 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N164	00000
		1 3/4"	2 5/8"	1/8"	5,000 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N165	00000
		2"	3"	1/8"	5,700 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N166	0000

2"	4"	1/8"	10,000 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N167	00000
2 1/4"	4"	1/8"	10,400 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N168	00000
2 1/2"	3 1/4"	1/8"	4,500 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N169	00000
2 3/4"	3 7/8"	1/4"	6,600 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N171	00000
3"	4"	1/8"	6,000 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N172	00000
3 mm	6 mm	1.5 mm	125 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N173	00000
4 mm	8 mm	1.5 mm	200 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N174	00000
5 mm	10 mm	1.5 mm	250 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N175	00000
6 mm	12 mm	1.5 mm	310 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N11	0000
8 mm	16 mm	1.5 mm	410 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N12	0000
10 mm	18 mm	1.5 mm	420 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N14	0000
10 mm	18 mm	2 mm	420 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N13	0000
12 mm	24 mm	2 mm	620 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N15	0000
12 mm	24 mm	3 mm	620 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N16	0000
14 mm	28 mm	2 mm	1,400 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N17	0000
16 mm	32 mm	2 mm	1,650 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N21	0000
16 mm	32 mm	3 mm	1,650 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N22	0000
20 mm	40 mm	2 mm	2,050 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N25	0000
20 mm	40 mm	3 mm	2,050 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N26	0000
25 mm	50 mm	4 mm	2,550 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N31	00000
30 mm	60 mm	4 mm	6,200 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N32	00000
40 mm	60 mm	4 mm	4,550 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	—	7380N34	00000

Thrust Bearings

With no moving parts, these bearings are the plainest way to support thrust loads while reducing friction. They don't come with lubricant, so you can choose the oil that's best for your application. Make sure to mount them where they're easy to access, since you'll need to replenish the oil frequently. All are fabricated and inspected in the U.S.

High-Load 932 Bearing Bronze—Cast from an alloy of leaded tin bronze for uniform rigidity and strength. Also known as 660 leaded bronze.

High-Load Chemical-Resistant 954 Bearing Bronze—The addition of iron and aluminum makes these bearings strong and exceptionally chemical resistant. You'll find them in demanding environments, such as salt mines. Also known as aluminum bronze.

	For Shaft Dia.	OD	Thk.	Dynamic Thrust Load Cap. @ Speed	Temp. Range, ° F		Each
High-Load 932 Bearing Bronze



		1/4"	7/16"	1/16"	Not Rated	-350 to 450	7814K421	00000


		1/4"	1/2"	1/16"	Not Rated	-350 to 450	7814K422	0000
		1/4"	5/8"	1/16"	980 lb. @ 120 rpm	-350 to 450	7814K11	0000
		5/16"	5/8"	1/16"	Not Rated	-350 to 450	7814K423	0000
		5/16"	3/4"	1/16"	Not Rated	-350 to 450	7814K424	0000
		3/8"	5/8"	1/16"	Not Rated	-350 to 450	7814K425	0000
		3/8"	3/4"	1/16"	1,050 lb. @ 120 rpm	-350 to 450	7814K12	0000
		3/8"	3/4"	1/8"	1,050 lb. @ 120 rpm	-350 to 450	7814K13	0000
		7/16"	3/4"	1/16"	Not Rated	-350 to 450	7814K426	0000
		1/2"	3/4"	1/16"	780 lb. @ 120 rpm	-350 to 450	7814K14	0000
		1/2"	7/8"	3/16"	1,100 lb. @ 120 rpm	-350 to 450	7814K1	00000


		1/2"	1"	1/16"	1,400 lb. @ 120 rpm	-350 to 450	7814K15	0000
		1/2"	1"	3/32"	1,400 lb. @ 120 rpm	-350 to 450	7814K16	0000
		1/2"	1"	1/8"	1,400 lb. @ 120 rpm	-350 to 450	7814K17	0000
		9/16"	1 1/4"	1/16"	3,700 lb. @ 60 rpm	-350 to 450	7814K2	00000
		9/16"	1 1/4"	1/8"	3,700 lb. @ 60 rpm	-350 to 450	7814K3	00000
		5/8"	1"	1/16"	1,900 lb. @ 60 rpm	-350 to 450	7814K21	0000
		5/8"	1"	1/8"	1,900 lb. @ 60 rpm	-350 to 450	7814K22	0000
		5/8"	1 3/16"	1/16"	3,200 lb. @ 60 rpm	-350 to 450	7814K23	0000
		5/8"	1 3/16"	3/32"	3,200 lb. @ 60 rpm	-350 to 450	7814K24	0000
		5/8"	1 3/16"	1/8"	3,200 lb. @ 60 rpm	-350 to 450	7814K25	0000


		5/8"	1 1/4"	1/16"	3,500 lb. @ 60 rpm	-350 to 450	7814K26	0000
		5/8"	1 1/4"	1/8"	Not Rated	-350 to 450	7814K427	0000
		5/8"	1 1/2"	1/16"	Not Rated	-350 to 450	7814K428	0000
		5/8"	1 1/2"	1/8"	Not Rated	-350 to 450	7814K429	0000
		3/4"	1 1/4"	1/16"	3,000 lb. @ 60 rpm	-350 to 450	7814K27	0000
		3/4"	1 1/4"	1/8"	3,000 lb. @ 60 rpm	-350 to 450	7814K28	0000
		3/4"	1 3/8"	1/16"	Not Rated	-350 to 450	7814K43	0000
		3/4"	1 3/8"	1/8"	3,600 lb. @ 60 rpm	-350 to 450	7814K29	0000
		3/4"	1 3/8"	1/4"	Not Rated	-350 to 450	7814K431	0000
		3/4"	1 9/16"	3/32"	4,500 lb. @ 60 rpm	-350 to 450	7814K31	0000


		3/4"	1 3/4"	1/8"	5,350 lb. @ 60 rpm	-350 to 450	7814K32	0000
		7/8"	1 1/2"	1/16"	3,700 lb. @ 60 rpm	-350 to 450	7814K33	0000
		7/8"	1 1/2"	1/8"	3,700 lb. @ 60 rpm	-350 to 450	7814K34	0000
		7/8"	2"	1/8"	Not Rated	-350 to 450	7814K432	0000
		1"	1 1/2"	1/16"	3,100 lb. @ 60 rpm	-350 to 450	7814K4	00000
		1"	1 1/2"	1/8"	3,100 lb. @ 60 rpm	-350 to 450	7814K35	0000
		1"	1 1/2"	3/16"	3,100 lb. @ 60 rpm	-350 to 450	7814K47	0000
		1"	1 5/8"	1/16"	3,750 lb. @ 60 rpm	-350 to 450	7814K48	0000
		1"	1 5/8"	1/4"	Not Rated	-350 to 450	7814K433	0000
		1"	1 3/4"	1/16"	Not Rated	-350 to 450	7814K434	0000


		1"	1 3/4"	1/8"	Not Rated	-350 to 450	7814K435	0000
		1"	2"	1/8"	5,600 lb. @ 60 rpm	-350 to 450	7814K36	0000
		1"	2"	3/16"	Not Rated	-350 to 450	7814K436	0000
		1"	2 7/8"	1/8"	9,450 lb. @ 60 rpm	-350 to 450	7814K5	00000
		1 3/16"	2"	1/8"	Not Rated	-350 to 450	7814K437	0000
		1 1/4"	1 11/16"	1/8"	Not Rated	-350 to 450	7814K438	0000
		1 1/4"	2"	1/16"	7,650 lb. @ 30 rpm	-350 to 450	7814K37	0000
		1 1/4"	2"	1/8"	7,650 lb. @ 30 rpm	-350 to 450	7814K38	0000
		1 1/4"	2 3/8"	1/16"	Not Rated	-350 to 450	7814K439	0000
		1 1/4"	2 3/8"	1/8"	Not Rated	-350 to 450	7814K44	0000

1 1/2"	2"	1/8"	Not Rated	-350 to 450	7814K441	0000
1 1/2"	2 1/2"	1/8"	12,000 lb. @ 30 rpm	-350 to 450	7814K39	0000
1 1/2"	3 1/2"	3/16"	21,400 lb. @ 30 rpm	-350 to 450	7814K6	00000
1 3/4"	2 7/16"	1/8"	8,850 lb. @ 30 rpm	-350 to 450	7814K7	00000
1 3/4"	2 5/8"	1/8"	10,900 lb. @ 30 rpm	-350 to 450	7814K8	00000
2"	3"	1/8"	12,500 lb. @ 30 rpm	-350 to 450	7814K42	0000
2"	3"	3/16"	Not Rated	-350 to 450	7814K442	00000
2"	3"	1/4"	Not Rated	-350 to 450	7814K443	00000
2"	4"	1/8"	Not Rated	-350 to 450	7814K444	00000
2"	4"	1/4"	Not Rated	-350 to 450	7814K445	00000
2 1/2"	3 1/4"	1/8"	Not Rated	-350 to 450	7814K446	00000
6 mm	12 mm	1.5 mm	Not Rated	-350 to 450	7814K447	0000
8 mm	16 mm	1.5 mm	Not Rated	-350 to 450	7814K448	0000
10 mm	18 mm	1.5 mm	Not Rated	-350 to 450	7814K449	0000
10 mm	18 mm	2 mm	Not Rated	-350 to 450	7814K45	0000
12 mm	24 mm	2 mm	Not Rated	-350 to 450	7814K451	0000
12 mm	24 mm	3 mm	Not Rated	-350 to 450	7814K452	0000
14 mm	28 mm	2 mm	Not Rated	-350 to 450	7814K453	0000
15 mm	30 mm	2 mm	Not Rated	-350 to 450	7814K454	0000
15 mm	30 mm	3 mm	Not Rated	-350 to 450	7814K455	0000
16 mm	32 mm	2 mm	Not Rated	-350 to 450	7814K456	0000
16 mm	32 mm	3 mm	Not Rated	-350 to 450	7814K457	0000
20 mm	40 mm	2 mm	Not Rated	-350 to 450	7814K458	0000
20 mm	40 mm	3 mm	Not Rated	-350 to 450	7814K459	0000
25 mm	50 mm	3 mm	Not Rated	-350 to 450	7814K46	0000
30 mm	60 mm	4 mm	Not Rated	-350 to 450	7814K461	0000

High-Load Chemical-Resistant 954 Bearing Bronze



		1/4"	5/8"	1/16"	1,150 lb. @ 120 rpm	-350 to 500	2872T1	00000


		3/8"	3/4"	1/16"	1,450 lb. @ 120 rpm	-350 to 500	2872T2	0000
		3/8"	3/4"	1/8"	1,450 lb. @ 120 rpm	-350 to 500	2872T3	00000
		1/2"	3/4"	1/16"	1,100 lb. @ 120 rpm	-350 to 500	2872T15	00000
		1/2"	7/8"	3/16"	1,800 lb. @ 120 rpm	-350 to 500	2872T16	00000
		1/2"	1"	1/16"	2,300 lb. @ 120 rpm	-350 to 500	2872T4	0000
		1/2"	1"	3/32"	2,300 lb. @ 120 rpm	-350 to 500	2872T17	00000
		1/2"	1"	1/8"	2,300 lb. @ 120 rpm	-350 to 500	2872T5	0000
		9/16"	1 1/4"	1/8"	4,400 lb. @ 60 rpm	-350 to 500	2872T19	00000
		5/8"	1"	1/16"	2,150 lb. @ 60 rpm	-350 to 500	2872T21	00000
		5/8"	1"	1/8"	2,150 lb. @ 60 rpm	-350 to 500	2872T6	00000


		5/8"	1 3/16"	1/16"	3,600 lb. @ 60 rpm	-350 to 500	2872T22	00000
		5/8"	1 3/16"	3/32"	3,600 lb. @ 60 rpm	-350 to 500	2872T23	00000
		5/8"	1 3/16"	1/8"	3,600 lb. @ 60 rpm	-350 to 500	2872T24	00000
		5/8"	1 1/4"	1/16"	4,100 lb. @ 60 rpm	-350 to 500	2872T25	00000
		3/4"	1 1/4"	1/16"	3,500 lb. @ 60 rpm	-350 to 500	2872T7	00000
		3/4"	1 1/4"	1/8"	3,500 lb. @ 60 rpm	-350 to 500	2872T8	0000
		3/4"	1 3/8"	1/8"	4,650 lb. @ 60 rpm	-350 to 500	2872T26	00000
		3/4"	1 9/16"	3/32"	6,600 lb. @ 60 rpm	-350 to 500	2872T27	00000
		3/4"	1 3/4"	1/8"	8,800 lb. @ 60 rpm	-350 to 500	2872T9	00000
		7/8"	1 1/2"	1/16"	5,200 lb. @ 60 rpm	-350 to 500	2872T28	00000


		7/8"	1 1/2"	1/8"	5,200 lb. @ 60 rpm	-350 to 500	2872T29	00000
		1"	1 1/2"	1/16"	4,400 lb. @ 60 rpm	-350 to 500	2872T31	00000
		1"	1 1/2"	1/8"	4,400 lb. @ 60 rpm	-350 to 500	2872T11	0000
		1"	2"	1/8"	9,350 lb. @ 60 rpm	-350 to 500	2872T12	00000
		1"	2 7/8"	1/8"	15,750 lb. @ 60 rpm	-350 to 500	2872T32	00000
		1 1/4"	2"	1/8"	8,600 lb. @ 30 rpm	-350 to 500	2872T13	00000
		1 1/2"	2 1/2"	1/8"	14,100 lb. @ 30 rpm	-350 to 500	2872T14	00000
		1 1/2"	3 1/2"	3/16"	35,300 lb. @ 30 rpm	-350 to 500	2872T33	00000
		1 3/4"	2 7/16"	1/8"	10,150 lb. @ 30 rpm	-350 to 500	2872T34	00000
		1 3/4"	2 5/8"	1/8"	13,500 lb. @ 30 rpm	-350 to 500	2872T35	00000


		2"	3"	1/8"	17,650 lb. @ 30 rpm	-350 to 500	2872T36	00000
		6 mm	16 mm	2 mm	Not Rated	-350 to 500	2872T37	0000
		10 mm	20 mm	2 mm	Not Rated	-350 to 500	2872T38	0000
		10 mm	20 mm	3 mm	Not Rated	-350 to 500	2872T39	0000
		12 mm	20 mm	2 mm	Not Rated	-350 to 500	2872T42	0000
		12 mm	25 mm	3 mm	Not Rated	-350 to 500	2872T45	0000
		14 mm	30 mm	3 mm	Not Rated	-350 to 500	2872T47	0000
		16 mm	25 mm	2 mm	Not Rated	-350 to 500	2872T48	0000
		16 mm	25 mm	3 mm	Not Rated	-350 to 500	2872T49	0000
		16 mm	30 mm	2 mm	Not Rated	-350 to 500	2872T51	0000


		16 mm	30 mm	3 mm	Not Rated	-350 to 500	2872T52	0000
		20 mm	30 mm	2 mm	Not Rated	-350 to 500	2872T53	0000
		20 mm	30 mm	3 mm	Not Rated	-350 to 500	2872T54	0000
		20 mm	35 mm	3 mm	Not Rated	-350 to 500	2872T55	00000
		20 mm	45 mm	3 mm	Not Rated	-350 to 500	2872T57	00000
		22 mm	40 mm	2 mm	Not Rated	-350 to 500	2872T58	0000
		25 mm	40 mm	2 mm	Not Rated	-350 to 500	2872T61	0000
		25 mm	40 mm	3 mm	Not Rated	-350 to 500	2872T62	0000
		30 mm	50 mm	3 mm	Not Rated	-350 to 500	2872T65	00000
		40 mm	90 mm	5 mm	Not Rated	-350 to 500	2872T67	00000

45 mm	60 mm	3 mm	Not Rated	-350 to 500	2872T68	00000
45 mm	65 mm	3 mm	Not Rated	-350 to 500	2872T69	00000
50 mm	75 mm	3 mm	Not Rated	-350 to 500	2872T71	00000

High-Load Cylindrical-Roller Thrust Bearings

Thick, pop-can-shaped rollers balance strength and speed. These bearings reduce friction and support heavier loads than ball or needle-roller thrust bearings.

They come as three separate pieces—one cage and two washers. The cage holds the rollers in place, while the washers create a surface for the rollers to run on. This design is easy to lubricate, but the oil will attract dust and grime since it’s exposed.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

	OD, mm	Thk., mm	Cage Material	Dynamic Thrust Load Cap., lb.	Max. Rotation Speed, rpm	Temp. Range, ° F	Includes		Each
Steel



	15	28	9	Nylon	3,200	13,400	-25 to 245	Two Washers	4300N11	0000000


	17	30	9	Nylon	3,550	12,300	-25 to 245	Two Washers	4300N12	000000
	20	35	10	Nylon	5,550	10,500	-25 to 245	Two Washers	4300N13	000000
	25	42	11	Nylon	7,400	8,600	-25 to 245	Two Washers	4300N14	000000
	30	47	11	Nylon	7,950	7,500	-25 to 245	Two Washers	4300N15	000000
	35	52	12	Nylon	8,750	6,600	-25 to 245	Two Washers	4300N16	000000
	40	60	13	Nylon	12,550	5,900	-25 to 245	Two Washers	4300N17	000000
	45	65	14	Nylon	13,250	5,200	-25 to 245	Two Washers	4300N18	000000
	50	70	14	Nylon	13,900	4,900	-25 to 245	Two Washers	4300N19	000000
	55	78	16	Nylon	20,200	4,350	-25 to 245	Two Washers	4300N21	000000
	60	85	17	Nylon	23,150	3,950	-25 to 245	Two Washers	4300N22	000000


	65	90	18	Nylon	24,050	3,700	-25 to 245	Two Washers	4300N23	000000
	70	95	18	Nylon	24,950	3,500	-25 to 245	Two Washers	4300N24	000000

Extreme-Load Tapered-Roller Thrust Bearings

With thick, tapered rollers, these thrust bearings are the strongest we offer. The rollers spin inside a raceway instead of a cage, so there’s room for more rollers to support higher loads than three-piece designs. You’ll often find them on crane hooks and kingpins that connect semi-trailers to semi-tractors. However, they rotate at a fraction of the speed of other roller thrust bearings.

Since they come as one piece, you don’t need to assemble cages and washers to install. An outer band holds the rollers inside the raceway, keeping lubricant in and dirt out.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Sealed—The best choice for dirty environments. In addition to a band, these bearings also have a rubber seal to block dust from creeping in and wearing down the rollers. However, they retain the most heat since air can’t flow through.

	Dynamic Thrust Load Cap., lb.	Max. Rotation Speed, rpm	Temp. Range, ° F		Each
Steel







	Open

	1 1/4"	2.198"	0.625"	12,000	10	0 to 150	2291N101	000000


	1 1/4"	2.635"	0.7658"	18,300	10	0 to 150	2291N103	00000
	1 3/8"	2.323"	0.656"	14,500	10	0 to 150	2291N104	00000
	1 1/2"	2.604"	0.765"	20,300	10	0 to 150	2291N106	00000
	1 5/8"	2.869"	0.8438"	20,500	10	0 to 150	2291N108	00000
	1 13/16"	3.276"	0.9375"	28,400	10	0 to 150	2291N111	00000
	2"	2.948"	0.625"	13,300	10	0 to 150	2291N115	000000
	2 1/16"	3.682"	1.062"	37,500	10	0 to 150	2291N116	000000




			Sealed

			1 1/4"	2.29"	0.677"	12,000	10	0 to 150	2291N102	00000


			1 3/8"	2.398"	0.656"	14,500	10	0 to 150	2291N105	00000
			1 1/2"	2.705"	0.815"	20,300	10	0 to 150	2291N107	00000
			1 5/8"	2.98"	0.8438"	20,500	10	0 to 150	2291N109	00000
			1 13/16"	3.455"	0.99"	28,400	10	0 to 150	2291N112	00000
			2 1/16"	3.823"	1.121"	37,500	10	0 to 150	2291N117	000000

Tight-Clearance Thrust Ball Bearings

Save space around your shaft—set the end of your shaft vertically on top of these bearings instead of inserting it through. They work similar to miniature turntables, so you can even use them to precisely rotate equipment. Fastened by a center rivet, these bearings don’t require you to assemble cages and washers like three-piece designs. They have thick washers, deeply grooved raceways, and oversized balls to support higher loads than bearings of the same size. The balls are exposed, which makes them easy to lubricate, but the oil may attract dust and grime.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

	OD	Thk.	Dynamic Thrust Load Cap., lb.	Max. Rotation Speed, rpm	Temp. Range, ° F		Each
Steel



	3/8"	3/8"	1/4"	400	1,500	-40 to 250	7809K311	000000


	1/2"	1/2"	5/16"	700	1,500	-40 to 250	7809K32	00000
	5/8"	5/8"	7/16"	1,150	1,500	-40 to 250	7809K33	00000
	11/16"	11/16"	1/2"	1,300	1,500	-40 to 250	7809K341	00000
	3/4"	3/4"	9/16"	1,700	1,500	-40 to 250	7809K351	00000
	13/16"	13/16"	5/8"	2,150	1,500	-40 to 250	7809K411	00000
	7/8"	7/8"	11/16"	2,150	1,500	-40 to 250	7809K421	00000
	15/16"	15/16"	3/4"	2,600	1,500	-40 to 250	7809K43	00000
	1"	1"	3/4"	3,050	1,500	-40 to 250	7809K44	00000
	1 1/8"	1 1/8"	7/8"	3,650	1,500	-40 to 250	7809K45	00000
	1 3/16"	1 3/16"	15/16"	4,300	1,500	-40 to 250	7809K51	00000


	1 7/16"	1 7/16"	1 3/16"	5,700	1,500	-40 to 250	7809K52	00000
	1 11/16"	1 11/16"	1 1/4"	7,550	1,500	-40 to 250	7809K53	00000

Dry-Running Metal-Reinforced Plastic Thrust Bearings

Combine naturally slippery PTFE with the strength of metal. These bearings don't need lubricant, so there's no oil to maintain, drip off, or attract dust. Backed with steel, they're as strong as other all-metal thrust bearings. However, they're best for dry environments since moisture will cause the steel to rust.

	OD	Thk.	Dynamic Thrust Load Cap. @ Speed	Temp. Range, ° F		Each
Steel-Backed PTFE



	1/2"	7/8"	1/16"	1,500 lb. @ 120 rpm	-320 to 530	1262N21	00000


	9/16"	1"	1/16"	3,450 lb. @ 60 rpm	-320 to 530	1262N22	0000
	5/8"	1 1/8"	1/16"	3,950 lb. @ 60 rpm	-320 to 530	1262N23	0000
	11/16"	1 3/16"	1/16"	4,000 lb. @ 60 rpm	-320 to 530	1262N24	0000
	3/4"	1 1/4"	1/16"	4,050 lb. @ 60 rpm	-320 to 530	1262N25	0000
	13/16"	1 3/8"	1/16"	4,550 lb. @ 60 rpm	-320 to 530	1262N26	0000
	7/8"	1 1/2"	1/16"	5,000 lb. @ 60 rpm	-320 to 530	1262N27	0000
	15/16"	1 5/8"	1/16"	5,500 lb. @ 60 rpm	-320 to 530	1262N28	0000
	1"	1 3/4"	1/16"	6,000 lb. @ 60 rpm	-320 to 530	1262N29	0000
	1 1/8"	2"	1/16"	13,900 lb. @ 30 rpm	-320 to 530	1262N31	0000
	1 1/4"	2 1/8"	1/16"	14,150 lb. @ 30 rpm	-320 to 530	1262N32	0000


	1 3/8"	2 1/4"	1/16"	14,350 lb. @ 30 rpm	-320 to 530	1262N33	0000
	1 1/2"	2 1/2"	1/16"	16,300 lb. @ 30 rpm	-320 to 530	1262N34	0000
	1 5/8"	2 5/8"	1/16"	16,500 lb. @ 30 rpm	-320 to 530	1262N35	0000
	1 3/4"	2 3/4"	1/16"	16,650 lb. @ 30 rpm	-320 to 530	1262N36	0000
	2"	3"	3/32"	17,000 lb. @ 30 rpm	-320 to 530	1262N37	0000
	2 1/8"	3 1/8"	3/32"	17,100 lb. @ 30 rpm	-320 to 530	1262N38	00000
	2 1/4"	3 1/4"	3/32"	17,250 lb. @ 30 rpm	-320 to 530	1262N39	00000
	10 mm	20 mm	1.5 mm	730 lb. @ 120 rpm	-320 to 530	1262N11	0000
	12 mm	24 mm	1.5 mm	880 lb. @ 120 rpm	-320 to 530	1262N12	0000
	18 mm	32 mm	1.5 mm	2,150 lb. @ 60 rpm	-320 to 530	1262N13	0000


	20 mm	36 mm	1.5 mm	2,400 lb. @ 60 rpm	-320 to 530	1262N14	0000
	26 mm	44 mm	1.5 mm	5,600 lb. @ 30 rpm	-320 to 530	1262N15	00000
	28 mm	48 mm	1.5 mm	6,200 lb. @ 30 rpm	-320 to 530	1262N16	00000
	42 mm	66 mm	1.5 mm	7,700 lb. @ 30 rpm	-320 to 530	1262N19	00000

High-Temperature Graphite-Lubricated Thrust Bearings

Keep parts spinning in temperatures as hot as 750° F. Lubricated with graphite, these bearings stay slippery where oil would burn off or solidify. You can install and forget them since the lubricant lasts forever. All are fabricated, lubricated, and inspected in the U.S.

841 Bearing Bronze—A balance of strength and speed makes these bearings a good choice for most applications. Also known as SAE 841 bearing bronze.

High-Load 932 Bearing Bronze—Cast from an alloy of leaded tin bronze for uniform rigidity and strength. Also known as 660 leaded bronze.

Extreme-Temperature Chemical-Resistant Graphalloy—From the freezer to the furnace, these bearings glide in extreme temperatures where other bearings grind and fail. They withstand strong acids and bases found in cleaning fluids. They even work underwater without swelling or warping.

	For Shaft Dia.	OD	Thk.	Dynamic Thrust Load Cap. @ Speed	Temp. Range, ° F		Each
841 Bearing Bronze



		1/4"	5/8"	1/16"	410 lb. @ 120 rpm	-50 to 700	7447K1	00000


		3/8"	3/4"	1/16"	530 lb. @ 120 rpm	-50 to 700	7447K2	0000
		3/8"	3/4"	1/8"	530 lb. @ 120 rpm	-50 to 700	7447K3	0000
		1/2"	3/4"	1/16"	390 lb. @ 120 rpm	-50 to 700	7447K4	0000
		1/2"	1"	1/16"	750 lb. @ 120 rpm	-50 to 700	7447K5	0000
		1/2"	1"	3/32"	750 lb. @ 120 rpm	-50 to 700	7447K6	0000
		1/2"	1"	1/8"	750 lb. @ 120 rpm	-50 to 700	7447K7	0000
		9/16"	1 1/4"	1/16"	1,550 lb. @ 60 rpm	-50 to 700	7447K8	0000
		9/16"	1 1/4"	1/8"	1,550 lb. @ 60 rpm	-50 to 700	7447K9	0000
		5/8"	1"	1/16"	760 lb. @ 60 rpm	-50 to 700	7447K11	0000
		5/8"	1"	1/8"	760 lb. @ 60 rpm	-50 to 700	7447K12	0000


		5/8"	1 3/16"	1/16"	1,250 lb. @ 60 rpm	-50 to 700	7447K13	0000
		5/8"	1 3/16"	3/32"	1,250 lb. @ 60 rpm	-50 to 700	7447K14	0000
		5/8"	1 3/16"	1/8"	1,250 lb. @ 60 rpm	-50 to 700	7447K15	0000
		5/8"	1 1/4"	1/16"	1,450 lb. @ 60 rpm	-50 to 700	7447K16	0000
		3/4"	1 1/4"	1/16"	1,250 lb. @ 60 rpm	-50 to 700	7447K17	0000
		3/4"	1 1/4"	1/8"	1,250 lb. @ 60 rpm	-50 to 700	7447K18	0000
		3/4"	1 3/8"	1/8"	1,650 lb. @ 60 rpm	-50 to 700	7447K19	0000
		3/4"	1 9/16"	3/32"	2,350 lb. @ 60 rpm	-50 to 700	7447K21	0000
		3/4"	1 3/4"	1/8"	2,850 lb. @ 60 rpm	-50 to 700	7447K22	0000
		7/8"	1 1/2"	1/16"	1,850 lb. @ 60 rpm	-50 to 700	7447K23	0000


		7/8"	1 1/2"	1/8"	1,850 lb. @ 60 rpm	-50 to 700	7447K24	0000
		1"	1 1/2"	1/16"	1,550 lb. @ 60 rpm	-50 to 700	7447K25	0000
		1"	1 1/2"	1/8"	1,550 lb. @ 60 rpm	-50 to 700	7447K26	0000
		1"	2"	1/8"	3,000 lb. @ 60 rpm	-50 to 700	7447K27	0000
		1 1/4"	2"	1/16"	3,050 lb. @ 30 rpm	-50 to 700	7447K28	0000
		1 1/4"	2"	1/8"	3,050 lb. @ 30 rpm	-50 to 700	7447K29	0000
		1 1/2"	2 1/2"	1/8"	5,000 lb. @ 30 rpm	-50 to 700	7447K31	0000
		1 1/2"	3 1/2"	3/16"	11,400 lb. @ 30 rpm	-50 to 700	7447K32	00000
		1 3/4"	2 5/8"	1/8"	4,800 lb. @ 30 rpm	-50 to 700	7447K33	0000
		2"	3"	1/8"	6,250 lb. @ 30 rpm	-50 to 700	7447K34	0000


		High-Load 932 Bearing Bronze



				1/2"	1"	1/16"	1,050 lb. @ 120 rpm	-350 to 450	2855T1	00000


				1/2"	1"	1/8"	1,050 lb. @ 120 rpm	-350 to 450	2855T2	00000
				5/8"	1"	1/8"	1,650 lb. @ 60 rpm	-350 to 450	2855T3	00000
				3/4"	1 1/4"	1/16"	2,200 lb. @ 60 rpm	-350 to 450	2855T4	00000
				3/4"	1 1/4"	1/8"	2,200 lb. @ 60 rpm	-350 to 450	2855T5	00000
				3/4"	1 3/4"	1/8"	4,000 lb. @ 60 rpm	-350 to 450	2855T6	00000
				1"	1 1/2"	1/8"	2,300 lb. @ 60 rpm	-350 to 450	2855T7	00000
				1"	2"	1/8"	4,200 lb. @ 60 rpm	-350 to 450	2855T8	00000
				1 1/4"	2"	1/8"	6,700 lb. @ 30 rpm	-350 to 450	2855T9	00000
				1 1/2"	2 1/2"	1/8"	8,950 lb. @ 30 rpm	-350 to 450	2855T11	00000
				12 mm	25 mm	2 mm	1,050 lb. @ 120 rpm	-350 to 450	2855T111	00000


				16 mm	25 mm	3 mm	1,550 lb. @ 60 rpm	-350 to 450	2855T113	00000
				20 mm	45 mm	3 mm	3,950 lb. @ 60 rpm	-350 to 450	2855T116	00000
				25 mm	40 mm	3 mm	2,650 lb. @ 60 rpm	-350 to 450	2855T117	00000
25 mm				50 mm	3 mm	4,100 lb. @ 60 rpm	-350 to 450	2855T118	00000
30 mm	50 mm			3 mm	6,800 lb. @ 30 rpm	-350 to 450	2855T119	00000


Extreme-Temperature Chemical-Resistant Graphalloy



				1 1/2"	2 15/16"	23/64"	1,500 lb. @ 48 rpm	-450 to 750	4457N11	000000


				1 3/4"	3 7/16"	23/64"	2,000 lb. @ 48 rpm	-450 to 750	4457N12	000000
				1 15/16"	3 7/16"	31/64"	2,000 lb. @ 36 rpm	-450 to 750	4457N13	000000
				2"	3 7/16"	31/64"	2,000 lb. @ 36 rpm	-450 to 750	4457N14	000000
				2 1/4"	3 15/16"	31/64"	2,500 lb. @ 36 rpm	-450 to 750	4457N15	000000
				2 1/2"	4 7/16"	31/64"	3,000 lb. @ 36 rpm	-450 to 750	4457N16	000000
				2 3/4"	5 7/16"	31/64"	5,000 lb. @ 24 rpm	-450 to 750	4457N17	000000
				3"	5 15/16"	31/64"	6,000 lb. @ 24 rpm	-450 to 750	4457N18	000000
				3 1/2"	6 7/16"	31/64"	7,000 lb. @ 24 rpm	-450 to 750	4457N19	000000

Dry-Running Thrust Bearings for Food and Beverage

Made of slippery, FDA-compliant plastic, these bearings are safe to directly touch food. Install them right inside food-processing equipment, such as mixers and fillers. They won’t impart odors, tastes, or harmful impurities, plus there’s no lubricant that could drip off or wash out. With no lubricant to replenish, these bearings also reduce maintenance and downtime.

Moisture-Resistant UHMW Polyethylene—Virtually nonabsorbent, these bearings keep their shape after washdowns. However, they won't stand up to high-temperature treatments such as steam cleaning.

Ultra-Low-Friction Rulon 641—Get effortless motion with strength surpassing UHMW polyethylene. Rulon 641 bearings can also operate from cryogenic to oven-like temperatures.

	OD	Thk.	Dynamic Thrust Load Cap. @ Speed	Color	Temp. Range, ° F	Specs. Met		Each
Moisture-Resistant UHMW Polyethylene



	1/4"	5/8"	1/16"	26 lb. @ 120 rpm	White	-100 to 180	FDA Compliant 21 CFR 177.1520, NSF/ANSI 2	2866T11	00000


	3/8"	3/4"	1/16"	28 lb. @ 120 rpm	White	-100 to 180	FDA Compliant 21 CFR 177.1520, NSF/ANSI 2	2866T12	0000
	1/2"	1"	1/16"	37 lb. @ 120 rpm	White	-100 to 180	FDA Compliant 21 CFR 177.1520, NSF/ANSI 2	2866T13	0000
	3/4"	1 3/8"	1/8"	95 lb. @ 60 rpm	White	-100 to 180	FDA Compliant 21 CFR 177.1520, NSF/ANSI 2	2866T14	0000
	1"	2"	1/8"	150 lb. @ 60 rpm	White	-100 to 180	FDA Compliant 21 CFR 177.1520, NSF/ANSI 2	2866T15	00000
	1 1/2"	3"	1/8"	450 lb. @ 30 rpm	White	-100 to 180	FDA Compliant 21 CFR 177.1520, NSF/ANSI 2	2866T16	00000


	Ultra-Low-Friction Rulon 641



			1/4"	3/8"	1/16"	50 lb. @ 120 rpm	White	-400 to 550	FDA Compliant 21 CFR 177.1550, USP Class VI	7493K47	00000


			1/4"	5/8"	1/16"	130 lb. @ 120 rpm	White	-400 to 550	FDA Compliant 21 CFR 177.1550, USP Class VI	7493K11	0000
			3/8"	3/4"	1/16"	140 lb. @ 120 rpm	White	-400 to 550	FDA Compliant 21 CFR 177.1550, USP Class VI	7493K12	0000
			1/2"	1"	1/16"	185 lb. @ 120 rpm	White	-400 to 550	FDA Compliant 21 CFR 177.1550, USP Class VI	7493K13	00000
			3/4"	1 3/8"	1/8"	480 lb. @ 60 rpm	White	-400 to 550	FDA Compliant 21 CFR 177.1550, USP Class VI	7493K14	00000
			1"	2"	1/8"	750 lb. @ 60 rpm	White	-400 to 550	FDA Compliant 21 CFR 177.1550, USP Class VI	7493K15	00000
			1 1/2"	3"	1/8"	2,250 lb. @ 30 rpm	White	-400 to 550	FDA Compliant 21 CFR 177.1550, USP Class VI	7493K16	00000
			6 mm	11.8 mm	1.5 mm	80 lb. @ 120 rpm	White	-400 to 550	FDA Compliant 21 CFR 177.1550, USP Class VI	7493K17	00000
			6 mm	12.8 mm	0.8 mm	95 lb. @ 120 rpm	White	-400 to 550	FDA Compliant 21 CFR 177.1550, USP Class VI	7493K48	00000
			8 mm	14.8 mm	0.8 mm	100 lb. @ 120 rpm	White	-400 to 550	FDA Compliant 21 CFR 177.1550, USP Class VI	7493K51	00000
			8 mm	15.8 mm	1.5 mm	110 lb. @ 120 rpm	White	-400 to 550	FDA Compliant 21 CFR 177.1550, USP Class VI	7493K18	00000


			10 mm	17.8 mm	1.5 mm	115 lb. @ 120 rpm	White	-400 to 550	FDA Compliant 21 CFR 177.1550, USP Class VI	7493K19	00000
			10 mm	17.8 mm	2 mm	115 lb. @ 120 rpm	White	-400 to 550	FDA Compliant 21 CFR 177.1550, USP Class VI	7493K21	00000
			12 mm	23.7 mm	2 mm	170 lb. @ 120 rpm	White	-400 to 550	FDA Compliant 21 CFR 177.1550, USP Class VI	7493K22	00000
			12 mm	23.7 mm	3 mm	170 lb. @ 120 rpm	White	-400 to 550	FDA Compliant 21 CFR 177.1550, USP Class VI	7493K23	00000

Oil-Embedded Thrust Bearings for Food and Beverage

Infused with food-grade oil, these bearings are safe for incidental contact with food. The oil is odorless, colorless, and tasteless, so they're common on food production and packaging lines. You can install and forget them since their porous surface releases oil over time. All are fabricated, lubricated, and inspected in the U.S.

If you need a bearing rated for direct contact with food, consider dry-running thrust bearings for food and beverage.

841 Bearing Bronze—A balance of strength and speed makes these bearings a good choice for most applications. Also known as SAE 841 bearing bronze.

	For Shaft Dia.	OD	Thk.	Dynamic Thrust Load Cap. @ Speed	Base Oil	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



		1/4"	5/8"	1/16"	510 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5429T7	00000


		3/8"	3/4"	1/16"	660 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5429T13	0000
		1/2"	3/4"	1/16"	490 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5429T6	0000
		1/2"	1"	1/16"	930 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5429T4	0000
		5/8"	1"	1/16"	950 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5429T15	0000
		5/8"	1"	1/8"	950 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5429T16	0000
		3/4"	1 1/4"	1/16"	1,550 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5429T9	0000
		3/4"	1 3/4"	1/8"	3,550 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5429T12	0000
		1"	1 1/2"	1/8"	1,950 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5429T2	0000
		1"	2"	1/8"	3,750 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5429T3	0000
		6 mm	12 mm	1.5 mm	260 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5429T211	0000


		8 mm	16 mm	1.5 mm	460 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5429T212	0000
		10 mm	18 mm	2 mm	540 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5429T213	0000
		12 mm	24 mm	2 mm	880 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5429T215	0000
		12 mm	24 mm	3 mm	880 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5429T216	0000
		14 mm	28 mm	2 mm	1,400 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5429T217	0000
		15 mm	30 mm	2 mm	1,600 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5429T218	0000
		16 mm	32 mm	3 mm	1,850 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5429T222	00000
		18 mm	36 mm	2 mm	2,350 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5429T223	0000
		20 mm	40 mm	2 mm	2,900 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5429T225	00000
		20 mm	40 mm	3 mm	2,900 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5429T226	00000


		24 mm	48 mm	3 mm	3,500 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5429T227	00000
		24 mm	48 mm	4 mm	3,500 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5429T228	00000
		25 mm	50 mm	3 mm	3,650 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5429T229	00000
		30 mm	60 mm	5 mm	6,550 lb. @ 30 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5429T233	00000
		40 mm	60 mm	4 mm	4,850 lb. @ 30 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5429T234	00000


		High-Load 863 Iron Copper



				1/4"	5/8"	1/16"	450 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5435T7	0000


				3/8"	3/4"	1/16"	490 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5435T13	0000
				1/2"	3/4"	1/16"	650 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5435T6	0000
				1/2"	1"	1/16"	650 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5435T4	0000
				1/2"	1"	1/8"	650 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5435T5	0000
				5/8"	1"	1/16"	1,050 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5435T15	0000
				5/8"	1"	1/8"	1,050 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5435T16	0000
				3/4"	1 1/4"	1/16"	1,400 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5435T9	0000
				3/4"	1 3/4"	1/8"	2,500 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5435T12	0000
				1"	1 1/2"	1/8"	1,450 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5435T2	0000
				1"	2"	1/8"	2,600 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5435T3	0000


				1 1/4"	2"	1/8"	4,250 lb. @ 30 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5435T8	0000
				1 1/2"	2"	1/8"	5,600 lb. @ 30 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5435T101	0000
				1 3/4"	2 5/8"	1/8"	5,100 lb. @ 30 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5435T102	0000
				2"	3"	1/8"	5,800 lb. @ 30 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5435T103	0000
				6 mm	12 mm	1.5 mm	310 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5371N111	0000
				8 mm	16 mm	1.5 mm	410 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5371N112	0000
				10 mm	18 mm	1.5 mm	420 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5371N114	0000
				10 mm	18 mm	2 mm	420 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5371N113	0000
12 mm				24 mm	2 mm	620 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5371N115	0000
12 mm	24 mm			3 mm	620 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5371N116	0000


14 mm	28 mm			2 mm	1,400 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5371N117	0000
18 mm	36 mm			3 mm	1,850 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5371N124	0000
20 mm	40 mm			3 mm	2,050 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5371N126	00000
24 mm	48 mm			3 mm	2,450 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5371N127	00000
25 mm	50 mm			3 mm	2,550 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5371N129	00000

Made-to-Order Oil-Embedded Thrust Bearings

When you can't find the perfect fit, send us the dimensions and we'll have a bearing made for you. These bearings are our simplest to use, with no moving parts and no need to lubricate. Their porous surface releases oil over time, so you can install and forget them.

To Order: Please specify ID, OD, and thickness. The difference between the ID and OD must be at least 0.25".

841 Bearing Bronze—A balance of strength and speed makes these bearings a good choice for most applications. Also known as SAE 841 bearing bronze.

	Choose an OD	Choose a Thickness	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze



	0.125" to 0.499"	0.500" to 0.749"	0.063" to 0.250"	Synthetic Oil	-35 to 300	5906K1	000000


	0.500" to 2.250"	0.750" to 2.500"	0.063" to 0.250"	Synthetic Oil	-35 to 300	5906K2	000000


	High-Load 863 Iron Copper



			0.125" to 0.499"	0.500" to 0.749"	0.063" to 0.250"	Synthetic Oil	-15 to 300	2879T91	00000


			0.500" to 2.250"	0.750" to 2.500"	0.063" to 0.250"	Synthetic Oil	-15 to 300	2879T92	000000

Made-to-Order Oil-Embedded Thrust Bearings for Food and Beverage

Get the perfect fit for your food plant—just send us the dimensions. Infused with food-grade oil, these bearings are safe for incidental contact with food. The oil is odorless, colorless, and tasteless, so they're common on food production and packaging lines. You can install and forget them since their porous surface releases oil over time.

To Order: Please specify ID, OD, and thickness. The difference between the ID and OD must be at least 0.25".

841 Bearing Bronze—A balance of strength and speed makes these bearings a good choice for most applications. Also known as SAE 841 bearing bronze.

	Choose an OD	Choose a Thickness	Base Oil	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



	0.125" to 0.499"	0.500" to 0.749"	0.063" to 0.250"	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5429T61	000000


	0.500" to 2.250"	0.750" to 2.500"	0.063" to 0.250"	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5429T62	000000

Made-to-Order Ultra-Low-Friction Oil-Embedded Thrust Bearings

Our slipperiest metal thrust bearings in whatever size you need—just send us the dimensions. Their oil contains nonstick PTFE particles that reduce wear and heat, extending the life of your equipment. You'll often find them on machines with frequent starts and stops, such as conveyors.

To Order: Please specify ID, OD, and thickness. The difference between the ID and OD must be at least 0.25".

841 Bearing Bronze—A balance of strength and speed makes these bearings a good choice for most applications. Also known as SAE 841 bearing bronze.

	Choose an OD	Choose a Thickness	Base Oil	Lubricant Additive	Temp. Range, ° F		Each
841 Bearing Bronze



	0.125" to 0.499"	0.500" to 0.749"	0.063" to 0.250"	Synthetic Oil	PTFE	-60 to 300	7421K35	000000


	0.500" to 2.250"	0.750" to 2.500"	0.063" to 0.250"	Synthetic Oil	PTFE	-60 to 300	7421K36	000000

Bearing Type

Bearing Type

Environment

Needle-Roller Thrust Bearings

Thrust Ball Bearings

Oil-Embedded Thrust Bearings

One-Piece Thrust Ball Bearings

Compatible Products for This Thrust Bearing

Dry-Running Thrust Bearings

Ultra-Low-Friction Oil-Embedded Thrust Bearings

Thrust Bearings

High-Load Cylindrical-Roller Thrust Bearings

Extreme-Load Tapered-Roller Thrust Bearings

Tight-Clearance Thrust Ball Bearings

Dry-Running Metal-Reinforced Plastic Thrust Bearings

High-Temperature Graphite-Lubricated Thrust Bearings

Dry-Running Thrust Bearings for Food and Beverage

Oil-Embedded Thrust Bearings for Food and Beverage

Made-to-Order Oil-Embedded Thrust Bearings

Made-to-Order Oil-Embedded Thrust Bearings for Food and Beverage

Made-to-Order Ultra-Low-Friction Oil-Embedded Thrust Bearings