6384K343 | Steel Ball Bearing

Filter by

System of Measurement

Shaft Diameter

Bearing Seal Type

Width

Ball Bearing Profile

Bearing Trade Number

Cage Material

Bearing Construction

Material

For Load Direction

Combined Radial and Thrust

Combined Radial, Thrust, and Moment

Ball Material

For Housing ID

Inner Ring Type

Maximum Rotation Speed

Shaft Mount Type

ABEC Rating

Shaft Type

Dynamic Radial Load Capacity

Less than 1,000 lb.

1,000 lb. to 9,999 lb.

10,000 lb. to 19,999 lb.

20,000 lb. to 29,999 lb.

30,000 lb. or greater

RoHS

REACH

Export Control Classification Number (ECCN)

1C998

1C999

EAR99

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

Lubrication

2,160 Products

Flanged Ball Bearings

Install these bearings inside a housing and they won't budge. The flange presses against the housing wall, so vibration and other sudden forces parallel to the shaft (thrust loads) won't knock them off-kilter.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Shielded—The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

Corrosion-Resistant 440C Stainless Steel—Combine the strength of steel with the corrosion resistance of stainless steel. These bearings won't degrade from water or mild chemicals, such as the ammonia in cleaning solutions. However, they'll weaken when exposed to salt water and harsh chemicals, such as bleach.

Extended Inner Ring—Connect to mating parts without the need for a spacer. The inner ring juts out farther than the outer ring, so shaft collars and other objects won't touch the bearing's moving parts.

ABEC Rating—Bearings with an ABEC rating meet industry tolerance standards established by the Annular Bearing Engineers Committee (ABEC). They're rated on a scale from 1 to 9. The higher the rating, the tighter the tolerance. Bearings rated ABEC 1 or 3 are precise enough for most applications. If your application consistently runs at high speeds or requires high accuracy, consider bearings rated ABEC 5 or higher, since they generate less friction and heat.

				Flange					Temp. Range, ° F
	For Shaft Dia.	For Housing ID	Wd.	OD	Thk.	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Inner Ring Type	Bearing Trade No.		Each
Open







				Steel

				1/4"	11/16"	1/4"	0.807"	0.05"	Not Rated	330	1,200	-20	250	Extended	—	6383K213	00000


				1/4"	7/8"	1/4"	1"	0.05"	Not Rated	400	1,200	-20	250	Extended	—	6383K214	0000
				5/16"	7/8"	1/4"	1"	0.05"	Not Rated	420	1,200	-20	250	Extended	—	6383K215	0000
				3/8"	1 1/16"	3/8"	1.182"	0.06"	Not Rated	630	1,200	-20	250	Extended	—	6383K227	0000
				3/8"	1 1/8"	3/8"	1.25"	0.06"	Not Rated	630	1,200	-20	250	Extended	—	6383K232	0000
				7/16"	1 1/16"	3/8"	1.182"	0.06"	Not Rated	630	1,200	-20	250	Extended	—	6383K224	0000
				1/2"	1 1/8"	3/8"	1.25"	0.06"	Not Rated	310	1,000	-20	250	Extended	—	6383K234	00000
				1/2"	1 3/8"	7/16"	1.5"	0.06"	Not Rated	450	1,000	-20	250	Extended	—	6383K241	00000
				1/2"	1 1/2"	5/8"	1.625"	0.06"	Not Rated	1,300	1,200	-20	250	Extended	—	6383K245	00000
				1/2"	1 3/4"	9/16"	1.875"	0.06"	Not Rated	1,400	1,200	-20	250	Extended	—	6383K253	00000
				5/8"	1 3/8"	7/16"	1.5"	0.06"	Not Rated	450	1,000	-20	250	Extended	—	6383K244	00000


				5/8"	1 1/2"	7/16"	1.625"	0.06"	Not Rated	1,300	1,200	-20	250	Extended	—	6383K247	00000
				3/4"	1 3/4"	9/16"	1.875"	0.06"	Not Rated	1,550	1,200	-20	250	Extended	—	6383K251	00000
				1"	2"	1/2"	2.125"	0.06"	Not Rated	820	1,000	-20	250	Extended	—	6383K257	00000
				1.5 mm	4 mm	1.2 mm	5 mm	0.4 mm	3	20	120,000	-50	300	Standard	681	57155K411	00000
				3 mm	6 mm	2 mm	7.2 mm	0.6 mm	3	40	96,000	-50	300	Standard	63	57155K424	0000
				3 mm	10 mm	4 mm	11.5 mm	1 mm	3	140	78,000	-50	300	Standard	623	57155K435	00000
				4 mm	7 mm	2 mm	8.2 mm	0.6 mm	3	60	82,000	-50	300	Standard	74	57155K437	00000
				4 mm	8 mm	2 mm	9.2 mm	0.6 mm	3	80	79,000	-50	300	Standard	84	57155K439	00000
				4 mm	10 mm	3 mm	11.2 mm	0.6 mm	3	150	70,000	-50	300	Standard	104	57155K444	00000
				4 mm	12 mm	4 mm	13.5 mm	1 mm	3	210	67,000	-50	300	Standard	604	57155K448	00000


				5 mm	8 mm	2 mm	9.2 mm	0.6 mm	3	60	74,000	-50	300	Standard	85	57155K455	00000
				5 mm	9 mm	2.5 mm	10.2 mm	0.6 mm	3	90	71,000	-50	300	Standard	95	57155K457	00000
				5 mm	10 mm	3 mm	11.2 mm	0.6 mm	3	90	71,000	-50	300	Standard	105	57155K459	00000
				5 mm	11 mm	3 mm	12.5 mm	0.8 mm	3	160	64,000	-50	300	Standard	685	57155K462	00000
				5 mm	14 mm	5 mm	16 mm	1 mm	3	290	56,000	-50	300	Standard	605	57155K466	00000
				5 mm	16 mm	5 mm	18 mm	1 mm	3	380	52,000	-50	300	Standard	625	57155K468	00000
				5 mm	19 mm	6 mm	22 mm	1.5 mm	3	520	45,000	-50	300	Standard	635	57155K471	00000
				6 mm	10 mm	2.5 mm	11.2 mm	0.6 mm	3	110	64,000	-50	300	Standard	106	57155K472	00000
				6 mm	13 mm	3.5 mm	15 mm	1 mm	3	240	56,000	-50	300	Standard	686	57155K476	00000
				6 mm	15 mm	5 mm	17 mm	1.2 mm	3	300	54,000	-50	300	Standard	696	57155K478	00000


				6 mm	17 mm	6 mm	19 mm	1.2 mm	3	500	49,000	-50	300	Standard	606	57155K481	00000
				6 mm	19 mm	6 mm	22 mm	1.5 mm	3	520	45,000	-50	300	Standard	626	57155K483	00000
				7 mm	11 mm	2.5 mm	12.2 mm	0.6 mm	3	100	59,000	-50	300	Standard	117	57155K485	00000
				8 mm	14 mm	3.5 mm	15.6 mm	0.8 mm	3	180	50,000	-50	300	Standard	148	57155K496	0000
				8 mm	16 mm	4 mm	18 mm	1 mm	3	280	47,000	-50	300	Standard	688	57155K498	00000
				8 mm	19 mm	6 mm	22 mm	1.5 mm	3	500	44,000	-50	300	Standard	698	57155K511	00000
				8 mm	22 mm	7 mm	25 mm	1.5 mm	3	740	39,000	-50	300	Standard	608	57155K513	00000
				9 mm	20 mm	6 mm	23 mm	1.5 mm	3	550	42,000	-50	300	Standard	699	57155K516	00000
				9 mm	24 mm	7 mm	27 mm	1.5 mm	3	750	36,000	-50	300	Standard	609	57155K518	00000
				10 mm	15 mm	3 mm	16.5 mm	0.8 mm	1	190	17,000	-50	280	Standard	6700	4390N111	00000


				10 mm	19 mm	5 mm	21 mm	1 mm	1	380	40,000	-50	280	Standard	6800	4390N113	00000
				10 mm	19 mm	7 mm	21 mm	1.5 mm	1	380	40,000	-50	280	Standard	63800	4390N115	00000
				10 mm	22 mm	6 mm	25 mm	1.5 mm	1	600	37,000	-50	280	Standard	6900	4390N117	00000
				12 mm	18 mm	4 mm	19.5 mm	0.8 mm	1	205	15,000	-50	280	Standard	6701	4390N119	00000
12 mm				21 mm	5 mm	23 mm	1.1 mm	1	430	36,000	-50	280	Standard	6801	4390N122	00000
12 mm	21 mm			7 mm	23 mm	1.5 mm	1	430	36,000	-50	280	Standard	63801	4390N124	00000
12 mm	24 mm			6 mm	26.5 mm	1.5 mm	1	640	33,000	-50	280	Standard	6901	4390N125	00000
15 mm	21 mm			4 mm	22.5 mm	0.8 mm	1	210	13,000	-50	280	Standard	6702	4390N127	00000
15 mm	24 mm			5 mm	26 mm	1.1 mm	1	460	31,000	-50	280	Standard	6802	4390N129	00000
17 mm	23 mm	4 mm		24.5 mm	0.8 mm	1	220	11,000	-50	280	Standard	6703	4390N135	00000
17 mm	30 mm	7 mm	32.5 mm	1.5 mm	1	1,000	26,000	-50	280	Standard	6903	4390N137	00000
20 mm	27 mm	4 mm	28.5 mm	0.8 mm	1	225	10,000	-50	280	Standard	6704	4390N138	00000
20 mm	32 mm	7 mm	35 mm	1.5 mm	1	900	25,000	-50	280	Standard	6804	4390N139	00000
25 mm	32 mm	4 mm	34 mm	1 mm	1	245	8,000	-50	280	Standard	6705	4390N142	00000
30 mm	37 mm	4 mm	39 mm	1 mm	1	250	7,000	-50	280	Standard	6706	4390N145	00000



		Corrosion-Resistant 440C Stainless Steel

		3/64"	5/32"	1/16"	0.203"	0.01"	5	30	120,000	-65	250	Standard	R0	57155K201	0000


		5/64"	1/4"	3/32"	0.296"	0.02"	5	70	80,000	-65	250	Standard	R1-4	57155K202	0000
		3/32"	3/16"	1/16"	0.234"	0.02"	5	40	95,000	-65	250	Standard	R133	57155K203	0000
		3/32"	5/16"	7/64"	0.359"	0.02"	5	120	71,000	-65	250	Standard	R1-5	57155K204	0000
		1/8"	1/4"	3/32"	0.296"	0.02"	5	60	80,000	-65	250	Standard	R144	57155K205	0000
		1/8"	5/16"	7/64"	0.359"	0.02"	5	120	71,000	-65	250	Standard	R2-5	57155K206	0000
		1/8"	3/8"	5/32"	0.44"	0.03"	5	140	67,000	-65	250	Standard	R2	57155K207	0000
		5/32"	5/16"	7/64"	0.359"	0.02"	5	80	63,000	-65	250	Standard	R155	57155K208	0000
		3/16"	5/16"	7/64"	0.359"	0.02"	5	80	63,000	-65	250	Standard	R156	57155K209	0000
		3/16"	3/8"	1/8"	0.422"	0.02"	5	160	60,000	-65	250	Standard	R166	57155K301	0000
		3/16"	1/2"	5/32"	0.565"	0.04"	5	290	50,000	-65	250	Standard	R3	57155K302	0000


		1/4"	3/8"	1/8"	0.422"	0.02"	5	80	56,000	-65	250	Standard	R168	57155K303	0000
		1/4"	1/2"	1/8"	0.547"	0.02"	5	240	50,000	-65	250	Standard	R188	57155K304	0000
		1/4"	5/8"	0.196"	0.69"	0.04"	5	330	45,000	-65	250	Standard	R4	57155K305	0000
		5/16"	1/2"	5/32"	0.547"	0.03"	5	120	48,000	-65	250	Standard	R1810	57155K306	0000
		1.5 mm	4 mm	1.2 mm	5 mm	0.4 mm	3	20	120,000	-50	300	Standard	681	57155K412	00000
		2 mm	5 mm	1.5 mm	6.1 mm	0.5 mm	3	30	110,000	-50	300	Standard	682	57155K414	00000
		2 mm	5 mm	2 mm	6.2 mm	0.6 mm	3	30	110,000	-50	300	Standard	52	57155K416	00000
		2 mm	6 mm	2.5 mm	7.2 mm	0.6 mm	3	60	100,000	-50	300	Standard	62	57155K421	00000
		3 mm	6 mm	2 mm	7.2 mm	0.6 mm	3	30	96,000	-50	300	Standard	63	57155K425	00000
		3 mm	7 mm	2 mm	8.1 mm	0.5 mm	3	50	88,000	-50	300	Standard	683	57155K427	00000


		3 mm	8 mm	3 mm	9.5 mm	0.7 mm	3	100	82,000	-50	300	Standard	693	57155K429	00000
		3 mm	10 mm	4 mm	11.5 mm	1 mm	3	110	78,000	-50	300	Standard	623	57155K436	00000
		4 mm	7 mm	2 mm	8.2 mm	0.6 mm	3	50	82,000	-50	300	Standard	74	57155K438	00000
		4 mm	8 mm	2 mm	9.2 mm	0.6 mm	3	70	79,000	-50	300	Standard	84	57155K441	00000
		4 mm	9 mm	2.5 mm	10.3 mm	0.6 mm	3	120	75,000	-50	300	Standard	684	57155K443	00000
		4 mm	12 mm	4 mm	13.5 mm	1 mm	3	170	67,000	-50	300	Standard	604	57155K449	00000
		4 mm	13 mm	5 mm	15 mm	1 mm	3	230	60,000	-50	300	Standard	624	57155K452	00000
		5 mm	8 mm	2 mm	9.2 mm	0.6 mm	3	50	74,000	-50	300	Standard	85	57155K456	00000
		5 mm	9 mm	2.5 mm	10.2 mm	0.6 mm	3	70	71,000	-50	300	Standard	95	57155K458	00000
		5 mm	10 mm	3 mm	11.2 mm	0.6 mm	3	70	71,000	-50	300	Standard	105	57155K461	00000


		5 mm	11 mm	3 mm	12.5 mm	0.8 mm	3	120	64,000	-50	300	Standard	685	57155K463	00000
		5 mm	13 mm	4 mm	15 mm	1 mm	3	190	59,000	-50	300	Standard	695	57155K465	00000
		5 mm	14 mm	5 mm	16 mm	1 mm	3	230	56,000	-50	300	Standard	605	57155K467	00000
		5 mm	16 mm	5 mm	18 mm	1 mm	3	310	52,000	-50	300	Standard	625	57155K469	00000
		6 mm	10 mm	2.5 mm	11.2 mm	0.6 mm	3	120	64,000	-50	300	Standard	106	57155K473	00000
		6 mm	12 mm	3 mm	13.2 mm	0.6 mm	3	120	59,000	-50	300	Standard	126	57155K475	00000
		6 mm	15 mm	5 mm	17 mm	1.2 mm	3	240	54,000	-50	300	Standard	696	57155K479	00000
		6 mm	17 mm	6 mm	19 mm	1.2 mm	3	400	49,000	-50	300	Standard	606	57155K482	00000
		6 mm	19 mm	6 mm	22 mm	1.5 mm	3	410	45,000	-50	300	Standard	626	57155K484	00000
		7 mm	11 mm	2.5 mm	12.2 mm	0.6 mm	3	80	59,000	-50	300	Standard	117	57155K486	00000


		8 mm	14 mm	3.5 mm	15.6 mm	0.8 mm	3	140	50,000	-50	300	Standard	148	57155K497	00000
		8 mm	16 mm	4 mm	18 mm	1 mm	3	220	47,000	-50	300	Standard	688	57155K499	00000
		8 mm	19 mm	6 mm	22 mm	1.5 mm	3	400	44,000	-50	300	Standard	698	57155K512	00000
		8 mm	22 mm	7 mm	25 mm	1.5 mm	3	590	39,000	-50	300	Standard	608	57155K514	00000
		9 mm	17 mm	4 mm	19 mm	1 mm	3	230	44,000	-50	300	Standard	689	57155K515	00000
		10 mm	15 mm	3 mm	16.5 mm	0.8 mm	1	150	17,000	-50	280	Standard	6700	4390N112	00000
		10 mm	19 mm	5 mm	21 mm	1 mm	1	300	40,000	-50	280	Standard	6800	4390N114	00000
		15 mm	21 mm	4 mm	22.5 mm	0.8 mm	1	165	13,000	-50	280	Standard	6702	4390N128	00000
		15 mm	28 mm	7 mm	30.5 mm	1.5 mm	1	770	29,000	-50	280	Standard	6902	4390N134	00000


Shielded







				Steel

				2 mm	5 mm	2.5 mm	6.2 mm	0.6 mm	3	30	94,000	-50	300	Standard	52-2Z	57155K527	00000


				2.5 mm	6 mm	2.6 mm	7.1 mm	0.8 mm	3	40	81,000	-50	300	Standard	682-2Z	57155K535	00000
				3 mm	6 mm	2.5 mm	7.2 mm	0.6 mm	3	40	81,000	-50	300	Standard	63-2Z	57155K537	00000
				3 mm	8 mm	4 mm	9.5 mm	0.9 mm	3	120	70,000	-50	300	Standard	693-2Z	57155K542	00000
				3 mm	9 mm	5 mm	10.5 mm	1 mm	3	120	66,000	-50	300	Standard	603-2Z	57155K546	00000
				4 mm	7 mm	2.5 mm	8.2 mm	0.6 mm	3	60	71,000	-50	300	Standard	74-2Z	57155K551	00000
				4 mm	8 mm	3 mm	9.2 mm	0.6 mm	3	80	67,000	-50	300	Standard	84-2Z	57155K553	00000
				4 mm	10 mm	4 mm	11.2 mm	0.8 mm	3	150	59,000	-50	300	Standard	104-2Z	57155K555	00000
				4 mm	11 mm	4 mm	12.5 mm	1 mm	3	210	57,000	-50	300	Standard	694-2Z	57155K557	00000
				4 mm	16 mm	5 mm	18 mm	1 mm	3	300	46,000	-50	300	Standard	634-2Z	57155K564	00000
				5 mm	8 mm	2.5 mm	9.2 mm	0.6 mm	3	60	63,000	-50	300	Standard	85-2Z	57155K566	00000


				5 mm	9 mm	3 mm	10.2 mm	0.6 mm	3	90	60,000	-50	300	Standard	95-2Z	57155K643	00000
				5 mm	10 mm	4 mm	11.2 mm	0.8 mm	3	90	60,000	-50	300	Standard	105-2Z	57155K568	00000
				5 mm	11 mm	4 mm	12.6 mm	0.8 mm	3	160	54,000	-50	300	Standard	115-2Z	57155K571	00000
				5 mm	11 mm	5 mm	12.5 mm	1 mm	3	160	54,000	-50	300	Standard	685-2Z	57155K573	00000
				5 mm	13 mm	4 mm	15 mm	1 mm	3	240	50,000	-50	300	Standard	695-2Z	57155K575	00000
				5 mm	14 mm	5 mm	16 mm	1 mm	3	290	48,000	-50	300	Standard	605-2Z	57155K577	00000
				5 mm	16 mm	5 mm	18 mm	1 mm	3	380	44,000	-50	300	Standard	625-2Z	57155K579	00000
				6 mm	10 mm	3 mm	11.2 mm	0.6 mm	3	110	55,000	-50	300	Standard	106-2Z	57155K584	00000
				6 mm	13 mm	5 mm	15 mm	1.1 mm	3	240	48,000	-50	300	Standard	686-2Z	57155K588	00000
				6 mm	15 mm	5 mm	17 mm	1.2 mm	3	300	46,000	-50	300	Standard	696-2Z	57155K591	00000


				6 mm	17 mm	6 mm	19 mm	1.2 mm	3	500	42,000	-50	300	Standard	606-2Z	57155K593	00000
				6 mm	19 mm	6 mm	22 mm	1.5 mm	3	520	38,000	-50	300	Standard	626-2Z	57155K595	00000
				7 mm	19 mm	6 mm	22 mm	1.5 mm	3	520	38,000	-50	300	Standard	607-2Z	57155K616	00000
				8 mm	12 mm	3.5 mm	13.2 mm	0.8 mm	3	120	46,000	-50	300	Standard	128-2Z	57155K621	00000
				8 mm	14 mm	4 mm	15.6 mm	0.8 mm	3	180	42,000	-50	300	Standard	148-2Z	57155K623	00000
				8 mm	16 mm	5 mm	18 mm	1.1 mm	3	280	40,000	-50	300	Standard	688-2Z	57155K625	00000
				8 mm	19 mm	6 mm	22 mm	1.5 mm	3	500	37,000	-50	300	Standard	698-2Z	57155K627	00000
				8 mm	22 mm	7 mm	25 mm	1.5 mm	3	740	33,000	-50	300	Standard	608-2Z	57155K629	00000
				9 mm	20 mm	6 mm	23 mm	1.5 mm	3	550	35,000	-50	300	Standard	699-2Z	57155K634	00000
				9 mm	24 mm	7 mm	27 mm	1.5 mm	3	750	30,000	-50	300	Standard	609-2Z	57155K636	00000


				10 mm	15 mm	4 mm	16.5 mm	0.8 mm	1	190	15,000	-50	300	Standard	6700-2Z	4390N148	00000
				10 mm	19 mm	5 mm	21 mm	1 mm	1	380	34,000	-50	300	Standard	6800-2Z	4390N151	00000
				10 mm	22 mm	6 mm	25 mm	1.5 mm	1	600	31,000	-50	300	Standard	6900-2Z	4390N155	00000
				12 mm	18 mm	4 mm	19.5 mm	0.8 mm	1	200	13,000	-50	300	Standard	6701-2Z	4390N157	00000
				12 mm	21 mm	5 mm	23 mm	1.1 mm	1	430	30,000	-50	300	Standard	6801-2Z	4390N159	00000
				12 mm	21 mm	7 mm	23 mm	1.5 mm	1	430	30,000	-50	300	Standard	63801-2Z	4390N162	00000
				12 mm	24 mm	6 mm	26.5 mm	1.5 mm	1	640	28,000	-50	300	Standard	6901-2Z	4390N163	00000
				15 mm	21 mm	4 mm	22.5 mm	0.8 mm	1	210	11,000	-50	300	Standard	6702-2Z	4390N165	00000
				15 mm	24 mm	5 mm	26 mm	1.1 mm	1	460	26,000	-50	300	Standard	6802-2Z	4390N166	00000
				15 mm	24 mm	7 mm	26 mm	1.5 mm	1	460	26,000	-50	300	Standard	63802-2Z	4390N168	00000


				15 mm	28 mm	7 mm	30.5 mm	1.5 mm	1	970	24,000	-50	300	Standard	6902-2Z	4390N169	00000
				17 mm	23 mm	4 mm	24.5 mm	0.8 mm	1	220	9,500	-50	300	Standard	6703-2Z	4390N172	00000
				17 mm	26 mm	5 mm	28 mm	1.1 mm	1	500	24,000	-50	300	Standard	6803-2Z	4390N173	00000
				17 mm	30 mm	7 mm	32.5 mm	1.5 mm	1	1,000	22,000	-50	300	Standard	6903-2Z	4390N174	00000
20 mm				27 mm	4 mm	28.5 mm	0.8 mm	1	225	8,500	-50	300	Standard	6704-2Z	4390N175	00000
20 mm	32 mm			7 mm	35 mm	1.5 mm	1	900	21,000	-50	300	Standard	6804-2Z	4390N176	00000
20 mm	37 mm			9 mm	40 mm	2 mm	1	1,400	19,000	-50	300	Standard	6904-2Z	4390N177	00000
25 mm	37 mm			7 mm	40 mm	1.5 mm	1	960	18,000	-50	300	Standard	6805-2Z	4390N178	00000
25 mm	42 mm			9 mm	45 mm	2 mm	1	1,550	16,000	-50	300	Standard	6905-2Z	4390N179	00000
30 mm	42 mm	7 mm		45 mm	1.5 mm	1	1,000	15,000	-50	300	Standard	6806-2Z	4390N181	00000
30 mm	47 mm	9 mm	50 mm	2 mm	1	1,600	14,000	-50	300	Standard	6906-2Z	4390N182	00000



		Corrosion-Resistant 440C Stainless Steel

		3/64"	5/32"	3/32"	0.203"	0.03"	5	30	120,000	-65	250	Standard	R0-2Z	57155K307	00000


		3/64"	5/32"	3/32"	0.203"	0.03"	5	30	120,000	-65	250	Extended	R0-2Z	57155K18	00000
		5/64"	1/4"	9/64"	0.296"	0.03"	5	70	80,000	-65	250	Standard	R1-4-2Z	57155K309	00000
		5/64"	1/4"	9/64"	0.296"	0.03"	5	70	80,000	-65	250	Extended	R1-4-2Z	57155K326	0000
		3/32"	3/16"	3/32"	0.234"	0.03"	5	30	95,000	-65	250	Standard	R133-2Z	57155K311	0000
		3/32"	3/16"	3/32"	0.234"	0.03"	5	30	95,000	-65	250	Extended	R133-2Z	57155K327	00000
		3/32"	5/16"	9/64"	0.359"	0.03"	5	120	71,000	-65	250	Standard	R1-5-2Z	57155K312	00000
		3/32"	5/16"	9/64"	0.359"	0.03"	5	120	71,000	-65	250	Extended	R1-5-2Z	57155K328	00000
		1/8"	1/4"	7/64"	0.296"	0.03"	5	60	80,000	-65	250	Standard	R144-2Z	57155K313	0000
		1/8"	1/4"	7/64"	0.296"	0.03"	5	60	80,000	-65	250	Extended	R144-2Z	57155K329	0000
		1/8"	5/16"	9/64"	0.359"	0.03"	5	120	71,000	-65	250	Standard	R2-5-2Z	57155K314	0000


		1/8"	5/16"	9/64"	0.359"	0.03"	5	120	71,000	-65	250	Extended	R2-5-2Z	57155K331	0000
		1/8"	3/8"	9/64"	0.422"	0.03"	5	140	63,000	-65	250	Standard	R2-6-2Z	57155K315	0000
		1/8"	3/8"	9/64"	0.422"	0.03"	5	140	63,000	-65	250	Extended	R2-6-2Z	57155K332	0000
		1/8"	3/8"	5/32"	0.44"	0.03"	5	140	67,000	-65	250	Standard	R2-2Z	57155K316	0000
		5/32"	5/16"	1/8"	0.359"	0.04"	5	80	63,000	-65	250	Standard	R155-2Z	57155K317	0000
		5/32"	5/16"	1/8"	0.359"	0.04"	5	80	63,000	-65	250	Extended	R155-2Z	57155K2	00000
		3/16"	5/16"	1/8"	0.359"	0.04"	5	80	63,000	-65	250	Standard	R156-2Z	57155K318	0000
		3/16"	5/16"	1/8"	0.359"	0.04"	5	80	63,000	-65	250	Extended	R156-2Z	57155K334	0000
		3/16"	3/8"	1/8"	0.422"	0.03"	5	160	60,000	-65	250	Standard	R166-2Z	57155K319	0000
		3/16"	3/8"	1/8"	0.422"	0.03"	5	160	60,000	-65	250	Extended	R166-2Z	57155K335	0000


		3/16"	1/2"	0.196"	0.565"	0.04"	5	290	50,000	-65	250	Standard	R3-2Z	57155K321	0000
		1/4"	3/8"	1/8"	0.422"	0.04"	5	80	56,000	-65	250	Standard	R168-2Z	57155K322	0000
		1/4"	3/8"	1/8"	0.422"	0.04"	5	80	56,000	-65	250	Extended	R168-2Z	57155K336	0000
		1/4"	1/2"	3/16"	0.547"	0.05"	5	240	50,000	-65	250	Standard	R188-2Z	57155K323	0000
		1/4"	1/2"	3/16"	0.547"	0.05"	5	240	50,000	-65	250	Extended	R188-2Z	57155K337	0000
		1/4"	5/8"	0.196"	0.69"	0.04"	5	330	45,000	-65	250	Standard	R4-2Z	57155K324	0000
		5/16"	1/2"	5/32"	0.547"	0.03"	5	120	48,000	-65	250	Standard	R1810-2Z	57155K325	0000
		5/16"	1/2"	5/32"	0.547"	0.03"	5	120	48,000	-65	250	Extended	R1810-2Z	57155K338	0000
		1.5 mm	4 mm	2 mm	5 mm	0.6 mm	3	20	100,000	-50	300	Standard	681-2Z	57155K519	00000
		2 mm	5 mm	2.3 mm	6.1 mm	0.6 mm	3	30	94,000	-50	300	Standard	682-2Z	57155K526	00000


		2 mm	5 mm	2.5 mm	6.2 mm	0.6 mm	3	30	94,000	-50	300	Standard	52-2Z	57155K528	00000
		2 mm	6 mm	3 mm	7.5 mm	0.8 mm	3	60	86,000	-50	300	Standard	692-2Z	57155K531	00000
		3 mm	6 mm	2.5 mm	7.2 mm	0.6 mm	3	30	81,000	-50	300	Standard	63-2Z	57155K538	00000
		3 mm	7 mm	3 mm	8.1 mm	0.8 mm	3	50	74,000	-50	300	Standard	683-2Z	57155K541	00000
		3 mm	8 mm	4 mm	9.5 mm	0.9 mm	3	100	70,000	-50	300	Standard	693-2Z	57155K543	00000
		3 mm	10 mm	4 mm	11.5 mm	1 mm	3	120	66,000	-50	300	Standard	623-2Z	57155K549	00000
		4 mm	7 mm	2.5 mm	8.2 mm	0.6 mm	3	40	71,000	-50	300	Standard	74-2Z	57155K552	00000
		4 mm	8 mm	3 mm	9.2 mm	0.6 mm	3	70	67,000	-50	300	Standard	84-2Z	57155K554	00000
		4 mm	10 mm	4 mm	11.6 mm	0.8 mm	5	130	56,000	-65	250	Standard	104-2Z	7804K129	0000
		4 mm	11 mm	4 mm	12.5 mm	1 mm	3	180	57,000	-50	300	Standard	694-2Z	57155K558	00000


		4 mm	12 mm	4 mm	13.5 mm	1 mm	3	180	57,000	-50	300	Standard	604-2Z	57155K561	00000
		4 mm	13 mm	5 mm	15 mm	1 mm	3	240	51,000	-50	300	Standard	624-2Z	57155K563	00000
		4 mm	16 mm	5 mm	18 mm	1 mm	3	250	46,000	-50	300	Standard	634-2Z	57155K565	00000
		5 mm	8 mm	2.5 mm	9.2 mm	0.6 mm	3	50	63,000	-50	300	Standard	85-2Z	57155K567	00000
		5 mm	9 mm	3 mm	10.2 mm	0.6 mm	5	95	60,000	-65	250	Standard	95-2Z	7804K135	0000
		5 mm	10 mm	4 mm	11.2 mm	0.8 mm	3	70	60,000	-50	300	Standard	105-2Z	57155K569	00000
		5 mm	10 mm	4 mm	11.6 mm	0.8 mm	5	95	60,000	-65	250	Standard	105-2Z	7804K136	0000
		5 mm	11 mm	5 mm	12.5 mm	1 mm	3	120	54,000	-50	300	Standard	685-2Z	57155K574	00000
		5 mm	13 mm	4 mm	15 mm	1 mm	3	190	50,000	-50	300	Standard	695-2Z	57155K576	00000
5 mm		13 mm	4 mm	15 mm	1 mm	5	240	50,000	-65	250	Standard	695-2Z	7804K138	0000
5 mm	14 mm	5 mm	16 mm	1 mm	3	230	48,000	-50	300	Standard	605-2Z	57155K578	00000
5 mm	16 mm	5 mm	18 mm	1 mm	3	310	44,000	-50	300	Standard	625-2Z	57155K581	00000
5 mm	19 mm	6 mm	22 mm	1.5 mm	3	410	38,000	-50	300	Standard	635-2Z	57155K583	00000
6 mm	10 mm	3 mm	11.2 mm	0.6 mm	3	80	55,000	-50	300	Standard	106-2Z	57155K585	00000
6 mm	10 mm	3 mm	11.2 mm	0.6 mm	5	110	53,000	-65	250	Standard	106-2Z	7804K141	00000
6 mm	12 mm	4 mm	13.6 mm	0.8 mm	3	120	50,000	-50	300	Standard	126-2Z	57155K587	00000
6 mm	12 mm	4 mm	13.6 mm	0.8 mm	5	160	50,000	-65	250	Standard	126-2Z	7804K142	0000
6 mm	13 mm	5 mm	15 mm	1.1 mm	3	190	48,000	-50	300	Standard	686-2Z	57155K589	00000
6 mm	13 mm	5 mm	15 mm	1.1 mm	5	240	48,000	-65	250	Standard	686-2Z	7804K143	0000
6 mm	15 mm	5 mm	17 mm	1.2 mm	3	240	46,000	-50	300	Standard	696-2Z	57155K592	00000
6 mm	17 mm	6 mm	19 mm	1.2 mm	3	400	42,000	-50	300	Standard	606-2Z	57155K594	00000
6 mm	19 mm	6 mm	22 mm	1.5 mm	3	410	38,000	-50	300	Standard	626-2Z	57155K596	00000
7 mm	11 mm	3 mm	12.2 mm	0.6 mm	5	100	50,000	-65	250	Standard	117-2Z	7804K157	00000
7 mm	14 mm	5 mm	16 mm	1.1 mm	3	210	44,000	-50	300	Standard	687-2Z	57155K613	00000
8 mm	12 mm	3.5 mm	13.2 mm	0.8 mm	3	90	46,000	-50	300	Standard	128-2Z	57155K622	00000
8 mm	12 mm	3.5 mm	13.6 mm	0.8 mm	5	120	48,000	-65	250	Standard	128-2Z	7804K145	0000
8 mm	14 mm	4 mm	15.6 mm	0.8 mm	3	140	42,000	-50	300	Standard	148-2Z	57155K624	00000
8 mm	14 mm	4 mm	15.6 mm	0.8 mm	5	180	45,000	-65	250	Standard	148-2Z	7804K146	0000
8 mm	16 mm	5 mm	18 mm	1.1 mm	3	220	40,000	-50	300	Standard	688-2Z	57155K626	00000
8 mm	16 mm	5 mm	18 mm	1.1 mm	5	280	43,000	-65	250	Standard	688-2Z	7804K147	0000
8 mm	19 mm	6 mm	22 mm	1.5 mm	3	400	37,000	-50	300	Standard	698-2Z	57155K628	00000
8 mm	22 mm	7 mm	25 mm	1.5 mm	3	590	33,000	-50	300	Standard	608-2Z	57155K631	00000
9 mm	17 mm	5 mm	19 mm	1.1 mm	3	230	37,000	-50	300	Standard	689-2Z	57155K633	00000
9 mm	17 mm	5 mm	19 mm	1.1 mm	5	290	43,000	-65	250	Standard	689-2Z	7804K148	00000
9 mm	20 mm	6 mm	23 mm	1.5 mm	3	440	35,000	-50	300	Standard	699-2Z	57155K635	00000
10 mm	15 mm	4 mm	16.5 mm	0.8 mm	1	150	15,000	-50	300	Standard	6700-2Z	4390N149	00000
10 mm	19 mm	5 mm	21 mm	1 mm	1	300	34,000	-50	300	Standard	6800-2Z	4390N152	00000
10 mm	19 mm	7 mm	21 mm	1.5 mm	1	300	34,000	-50	300	Standard	63800-2Z	4390N154	00000
10 mm	22 mm	6 mm	25 mm	1.5 mm	1	480	31,000	-50	300	Standard	6900-2Z	4390N156	00000
12 mm	18 mm	4 mm	19.5 mm	0.8 mm	1	165	13,000	-50	300	Standard	6701-2Z	4390N158	00000
12 mm	21 mm	5 mm	23 mm	1.1 mm	1	340	30,000	-50	300	Standard	6801-2Z	4390N161	00000
12 mm	24 mm	6 mm	26.5 mm	1.5 mm	1	510	28,000	-50	300	Standard	6901-2Z	4390N164	00000
15 mm	24 mm	5 mm	26 mm	1.1 mm	1	370	26,000	-50	300	Standard	6802-2Z	4390N167	00000
15 mm	28 mm	7 mm	30.5 mm	1.5 mm	1	770	24,000	-50	300	Standard	6902-2Z	4390N171	00000

Sealed







				Steel

				1/4"	11/16"	5/16"	0.813"	0.06"	Not Rated	250	2,500	-20	250	Extended	—	6384K342	00000


				5/16"	7/8"	11/32"	1"	0.06"	Not Rated	320	2,500	-20	250	Extended	—	6384K343	00000
				Steel Ball Bearing, Flanged, Sealed, for 5/16" Shaft Diameter and 7/8" Housing ID Product Detail QuantityEachIn stock Select a compatible file type: Parasolid Compatible Products for This Ball Bearing
				3/8"	7/8"	11/32"	1"	0.06"	Not Rated	320	2,500	-20	250	Extended	—	6384K344	00000
				3/8"	29/32"	11/32"	1"	0.06"	Not Rated	350	2,500	-20	250	Extended	—	6384K346	00000
				3/8"	1 1/8"	3/8"	1.25"	0.06"	Not Rated	600	2,500	-20	250	Extended	—	6384K348	00000
				1/2"	1 1/8"	3/8"	1.25"	0.06"	Not Rated	310	1,000	-20	250	Extended	—	6384K361	00000
				1/2"	1 3/8"	7/16"	1.5"	0.06"	Not Rated	450	1,000	-20	250	Extended	—	6384K363	00000
				5/8"	1 3/8"	7/16"	1.5"	0.06"	Not Rated	450	1,000	-20	250	Extended	—	6384K365	00000
				3/4"	1 5/8"	1/2"	1.75"	0.06"	Not Rated	1,300	2,500	-20	250	Extended	—	6384K367	00000
				3/4"	1 3/4"	1/2"	1.875"	0.06"	Not Rated	1,300	2,500	-20	250	Extended	—	6384K369	00000
				3/4"	2"	9/16"	2.125"	0.06"	Not Rated	1,450	2,500	-20	250	Extended	—	6384K374	00000


				1"	2"	1/2"	2.125"	0.06"	Not Rated	820	1,000	-20	250	Extended	—	6384K373	00000