8184A15 | Precision File for Stainless Steel

Filter by

Shape

For Use On

Length

Grit Rating

File Shape

Width

Face Tooth Style

Single Cut with Chip Breaker

Sold As

File Type

Diameter

File Pattern

Flexibility

File Cut Number

Number of Pieces

Edge Tooth Style

Material

Ceramic/Diamond Blend

Handle Material

Abrasive Material

Ceramic/Diamond Blend

Face Shape

REACH

DFARS Specialty Metals

Exempt

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

RoHS

Compliant

Compliant with Exemptions

Not Compliant

Export Control Classification Number (ECCN)

Container Type

Pouch with Zipper Closure

665 Products

Rectangular Files


	Double-Cut Face	Single-Cut Face	Single-Cut Face with Chip Breaker

Files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Straight Rectangle

Straight files are also known as hand files.

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

Without Teeth—Edges without teeth protect adjacent surfaces when filing. Single-cut tapered files without teeth on the edges are often used to shape material on a lathe. Also known as lathe files.

						For Coarse Finish		For Medium Finish		For Fine Finish
	Lg.	Wd.	Thk.	Edge Tooth Style	For Use On		Each		Each		Each
Double Cut Flat Face







				Rigid

				6"	9/16"	1/8"	Flat Without Teeth × Flat Double Cut	Steel, Iron	4254A6	000000	4254A7	000000	4254A8	000000


				8"	3/4"	3/16"	Flat Without Teeth × Flat Double Cut	Steel, Iron	4254A9	00000	4254A11	00000	4254A12	00000
				10"	15/16"	3/16"	Flat Without Teeth × Flat Double Cut	Steel, Iron	4254A13	00000	4254A21	00000	4254A26	00000
				12"	1 1/8"	1/4"	Flat Without Teeth × Flat Double Cut	Steel, Iron	4254A27	00000	4254A28	00000	4254A29	00000

Tapered Rectangle

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal. Double-cut tapered files are also known as flat files.

Single-Cut Face—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

Single-Cut Face with Chip Breaker—Speed up reaching a fine finish. They remove material as quickly as double-cut files while leaving behind a smooth finish at the same time. They have single-cut teeth divided by diagonal cutting edges that act as chip breakers—the chip breakers rough the surface while the single-cut teeth smooth it.

Single-Cut Edge—Single-cut tapered files with teeth on the edges are often used to sharpen milling and circular saws. Also known as mill files.

Black Oxide—Black-oxide finish resists rust and clogging.

							For Coarse Finish		For Medium Finish		For Fine Finish
	Lg.	Wd.	Thk.	Edge Tooth Style	Finish	For Use On		Each		Each		Each
Double Cut Flat Face







				Rigid

				4"	7/16"	1/16"	Flat Single Cut × Flat Single Cut	—	Steel, Iron	4219A11	000000	———	0	4219A31	000000


				4"	1/2"	1/8"	Flat Single Cut × Flat Single Cut	—	Steel, Iron	———	0	4219A19	00000	———	0
				6"	9/16"	1/8"	Flat Single Cut × Flat Single Cut	—	Steel, Iron	4219A12	00000	4219A22	00000	4219A32	00000
				6"	9/16"	1/8"	Flat Single Cut × Flat Single Cut	Black Oxide	Steel, Iron	42605A31	0000	———	0	42605A36	00000
				8"	11/16"	1/8"	Flat Single Cut × Flat Single Cut	—	Steel, Iron	4219A13	00000	4219A23	00000	4219A33	00000
				8"	3/4"	1/8"	Flat Single Cut × Flat Single Cut	Black Oxide	Steel, Iron	42605A32	00000	———	0	42605A37	00000
				10"	7/8"	1/8"	Flat Single Cut × Flat Single Cut	—	Steel, Iron	4219A14	00000	4219A24	00000	4219A34	00000
				10"	15/16"	3/16"	Flat Single Cut × Flat Single Cut	Black Oxide	Steel, Iron	42605A33	00000	———	0	42605A38	00000
				12"	1 1/8"	3/16"	Flat Single Cut × Flat Single Cut	—	Steel, Iron	4219A15	00000	4219A25	00000	4219A35	00000
				12"	1 1/8"	3/16"	Flat Single Cut × Flat Single Cut	Black Oxide	Steel, Iron	42605A34	00000	———	0	42605A39	00000
				14"	1 5/16"	1/4"	Flat Single Cut × Flat Single Cut	—	Steel, Iron	4219A16	00000	———	0	4219A36	00000


				14"	1 5/16"	1/4"	Flat Single Cut × Flat Single Cut	Black Oxide	Steel, Iron	42605A35	00000	———	0	———	0
				14"	1 3/8"	5/16"	Flat Single Cut × Flat Single Cut	—	Steel, Iron	———	0	4219A26	00000	———	0
				16"	1 1/2"	1/4"	Flat Single Cut × Flat Single Cut	—	Steel, Iron	4219A37	00000	———	0	———	0


				Single Cut Flat Face







								Rigid

								4"	7/16"	1/16"	Flat Single Cut × Flat Single Cut	—	Steel, Iron	4225A11	0000	———	0	4225A31	00000


								6"	9/16"	1/8"	Flat Single Cut × Flat Single Cut	—	Steel, Iron	4225A12	0000	4225A22	00000	4225A32	00000
								6"	9/16"	1/8"	Flat Single Cut × Flat Single Cut	Black Oxide	Steel, Iron	42605A62	0000	42605A67	0000	42605A71	0000
								8"	11/16"	1/8"	Flat Single Cut × Flat Single Cut	—	Steel, Iron	4225A13	0000	4225A23	00000	4225A33	00000
								8"	3/4"	1/8"	Flat Single Cut × Flat Single Cut	Black Oxide	Steel, Iron	42605A63	0000	42605A68	00000	42605A72	00000
								10"	7/8"	1/8"	Flat Single Cut × Flat Single Cut	—	Steel, Iron	4225A14	00000	4225A24	00000	4225A34	00000
								10"	15/16"	3/16"	Flat Single Cut × Flat Single Cut	Black Oxide	Steel, Iron	42605A64	0000	42605A69	00000	42605A73	00000
								10"	1"	3/16"	Flat Without Teeth × Flat Without Teeth	—	Steel, Iron	4223A1	00000	———	0	4223A4	00000
								12"	1 1/8"	3/16"	Flat Single Cut × Flat Single Cut	—	Steel, Iron	4225A15	00000	4225A25	00000	4225A35	00000
								12"	1 1/8"	3/16"	Flat Single Cut × Flat Single Cut	Black Oxide	Steel, Iron	42605A65	00000	———	0	42605A111	00000
								12"	1 1/8"	1/4"	Flat Without Teeth × Flat Without Teeth	—	Steel, Iron	4223A2	00000	———	0	4223A5	00000


								14"	1 5/16"	1/4"	Flat Without Teeth × Flat Without Teeth	—	Steel, Iron	———	0	———	0	4225A111	00000
								14"	1 5/16"	1/4"	Flat Single Cut × Flat Single Cut	—	Steel, Iron	4225A16	00000	4225A39	00000	4225A36	00000
								14"	1 5/16"	1/4"	Flat Single Cut × Flat Single Cut	Black Oxide	Steel, Iron	42605A66	00000	———	0	———	0
								16"	1 1/2"	1/4"	Flat Single Cut × Flat Single Cut	—	Steel, Iron	4225A37	00000	———	0	———	0


								Single Cut Flat Face with Chip Breaker







										Rigid

		8"	3/4"							3/16"	Flat Single Cut × Flat Single Cut	—	Steel, Iron	———	0	———	0	4224A11	00000


		10"	15/16"							3/16"	Flat Single Cut × Flat Single Cut	—	Steel, Iron	———	0	———	0	4224A12	00000
		12"	1 1/8"							1/4"	Flat Single Cut × Flat Single Cut	—	Steel, Iron	———	0	———	0	4224A13	00000
		14"	1 3/8"							5/16"	Flat Single Cut × Flat Single Cut	—	Steel, Iron	———	0	———	0	4224A14	00000

Thin-Tapered Rectangle

Thin-Tapered

Rectangle

Thin tapered files taper more extremely toward the point than tapered files. They are often used to make notches in keys. Also known as warding files.

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

Single-Cut Edge—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

						For Coarse Finish		For Medium Finish		For Fine Finish
	Lg.	Wd.	Thk.	Edge Tooth Style	For Use On		Each		Each		Each
Double Cut Flat Face







				Rigid

				4"	7/16"	1/16"	Flat Single Cut × Flat Single Cut	Steel, Iron	4230A11	000000	4230A21	000000	4230A31	000000


				6"	5/8"	1/16"	Flat Single Cut × Flat Single Cut	Steel, Iron	4230A12	00000	4230A22	00000	4230A32	00000
				8"	3/4"	1/16"	Flat Single Cut × Flat Single Cut	Steel, Iron	4230A13	00000	4230A23	00000	4230A33	00000

File Sets

Keep multiple files on hand for workpieces of different shapes and sizes.

All sets include American-pattern files, also known as machinists' files.

Don't see the set you need? Create your own with a tool roll and individual files.

3 Pieces


	Rectangle

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

Single-Cut Face—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

Painted Steel Handle—Files with painted steel handles have a single-piece construction.

Rubber Handle—Files with rubber handles have a cushioned, comfortable grip.

Black Oxide—Files with a black-oxide finish resist rust and clogging.

	Wd.	Face Tooth Style	File Pattern	Handle Material	Finish	Container Type	For Use On		Each
Rectangle—For Coarse and Fine Finish



	10"	15/16"	Double Cut, Single Cut, Single Cut with Chip Breaker	American	Painted Steel	—	Canvas Roll-Up Pouch	Steel, Iron	9768N11	000000


	10"	1"	Double Cut, Single Cut, Single Cut with Chip Breaker	American	Rubber	Black Oxide	Canvas Roll-Up Pouch	Steel, Iron	9768N12	00000
	13 1/2"	15/16"	Double Cut, Single Cut, Single Cut with Chip Breaker	American	Painted Steel	Black Oxide	Canvas Roll-Up Pouch	Steel, Iron	42405A46	00000

5 Pieces


Rectangle	Half Round

Round	Triangle

Square

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

Single-Cut Face—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

Rubber Handle—Files with rubber handles have a cushioned, comfortable grip.

Wood Handle—Files with wood handles have a durable grip that's shaped to fit comfortably in your hand.

Black Oxide—Files with a black-oxide finish resist rust and clogging.

	Wd.	Face Tooth Style	File Pattern	Handle Material	Finish	Container Type	For Use On		Each
Rectangle, Half Round, and Triangle—For Coarse and Fine Finish



	6", 8", 10"	5/16", 11/16", 15/16", 1"	Double Cut, Single Cut	American	Rubber	—	Plastic Pouch	Steel, Iron	8181A21	000000


	Rectangle, Half Round, Round, and Square—For Coarse and Fine Finish



			8"	5/16", 13/16"	Double Cut, Single Cut, Single Cut with Chip Breaker	American	Rubber	—	Canvas Roll-Up Pouch	Steel, Iron	9768N13	00000


			8"	5/16", 13/16"	Double Cut, Single Cut, Single Cut with Chip Breaker	American	Rubber	Black Oxide	Canvas Roll-Up Pouch	Steel, Iron	42605A81	00000
			8"	5/16", 3/4", 13/16"	Double Cut, Single Cut, Single Cut with Chip Breaker	American	Wood	—	Canvas Roll-Up Pouch	Steel, Iron	8181A12	00000
			10"	3/8", 15/16", 1"	Double Cut, Single Cut, Single Cut with Chip Breaker	American	Rubber	—	Canvas Roll-Up Pouch	Steel, Iron	9768N14	00000

6 Pieces


Rectangle	Half Round

Round	Triangle

Square

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

Single-Cut Face—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

Wood Handle—Files with wood handles have a durable grip that's shaped to fit comfortably in your hand.

Length—For files without handles, length does not include the tang.

	Wd.	Face Tooth Style	File Pattern	Handle Material	Container Type	For Use On		Each
Rectangle and Half Round—For Coarse, Medium, and Fine Finish



	10"	15/16", 1"	Double Cut	American	Wood	Canvas Roll-Up Pouch	Steel, Iron	42415A41	0000000


	Rectangle, Half Round, Round, Triangle, and Square—For Medium Finish



			4"	3/16", 7/16", 1/2"	Double Cut	American	Wood	Metal Case	Steel, Iron	8171A11	00000


			Rectangle, Half Round, Round, Triangle, and Square—For Fine Finish



					4"	3/16", 1/4", 7/16", 1/2"	Double Cut, Single Cut	American	—	Canvas Roll-Up Pouch	Steel, Iron	8192A11	00000


					4"	3/16", 1/4", 7/16", 1/2"	Double Cut, Single Cut	American	Wood	Canvas Roll-Up Pouch	Steel, Iron	8192A12	00000

7 Pieces

Rectangle

Round

Tear Drop

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

Swiss—Swiss-pattern files create more consistent finishes than American-pattern files. They have a round or tear drop shape.

Length—For files without handles, length does not include the tang.

	Wd.	Face Tooth Style	File Pattern	Container Type	For Use On		Each
Rectangle, Round, and Tear Drop—For Coarse, Fine, and Extra Fine Finish



	6"	15/64", 3/8", 5/8"	Double Cut	American, Swiss	Canvas Roll-Up Pouch	Steel, Iron	8194A113	0000000

9 Pieces


Rectangle	Half Round

Round	Triangle

Square	Tear Drop

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

Single-Cut Face—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

Swiss—Swiss-pattern files create more consistent finishes than American-pattern files. They have a round or tear drop shape.

Rubber Handle—Files with rubber handles have a cushioned, comfortable grip.

Wood Handle—Files with wood handles have a durable grip that's shaped to fit comfortably in your hand.

Black Oxide—Files with a black-oxide finish resist rust and clogging.

Length—For files without handles, length does not include the tang.

	Wd.	Face Tooth Style	File Pattern	Handle Material	Finish	Container Type	For Use On		Each
Rectangle, Half Round, Round, and Triangle—For Coarse and Fine Finish



	6", 10"	3/8", 15/16", 1"	Double Cut, Single Cut, Single Cut with Chip Breaker	American	Rubber	Black Oxide	Canvas Roll-Up Pouch	Steel, Iron	42605A82	0000000


	Rectangle, Half Round, Round, Triangle, and Square—For Coarse and Fine Finish



			7", 10"	3/8", 15/16", 1", 1 11/16"	Double Cut, Single Cut	American	—	—	Canvas Roll-Up Pouch	Steel, Iron	8173A11	000000


			7", 10"	3/8", 15/16", 1", 1 11/16"	Double Cut, Single Cut	American	Wood	—	Canvas Roll-Up Pouch	Steel, Iron	8173A12	000000


			Rectangle, Round, and Tear Drop—For Coarse, Medium, Fine, and Extra Fine Finish



					4", 6"	15/64", 3/8", 15/32", 5/8"	Double Cut	American, Swiss	—	—	Canvas Roll-Up Pouch	Steel, Iron	8194A112	000000

10 Pieces


Rectangle	Half Round

Round	Square

Knife

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

Wood Handle—Files with wood handles have a durable grip that's shaped to fit comfortably in your hand.

	Wd.	Face Tooth Style	File Pattern	Handle Material	Container Type	For Use On		Each
Rectangle, Half Round, Round, Square, and Knife—For Coarse and Medium Finish



	6", 10"	3/8", 5/8", 15/16", 1"	Double Cut	American	Wood	Canvas Roll-Up Pouch	Steel, Iron	42415A43	0000000

13 Pieces


Rectangle	Half Round

Round	Triangle

Square

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

Single-Cut Face—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

Wood Handle—Files with wood handles have a durable grip that's shaped to fit comfortably in your hand.

Length—For files without handles, length does not include the tang.

	Wd.	Face Tooth Style	File Pattern	Handle Material	Container Type	For Use On		Each
Rectangle, Half Round, Round, Triangle, and Square—For Coarse, Medium, and Fine Finish



	8", 10"	3/8", 1/2", 15/16", 1"	Double Cut, Single Cut	American	—	Canvas Roll-Up Pouch	Steel, Iron	8176A11	0000000


	8", 10"	3/8", 1/2", 15/16", 1"	Double Cut, Single Cut	American	Wood	Canvas Roll-Up Pouch	Steel, Iron	8176A12	000000

Half-Round Files


	Single-Cut Face	Double-Cut Face

Use on concave, convex, and flat surfaces. These files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Straight Half Round

Single-Cut Face—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

Black Oxide—Black-oxide finish resists rust and clogging.

						For Coarse Finish		For Medium Finish		For Fine Finish
	Lg.	Wd.	Thk.	Finish	For Use On		Each		Each		Each
Double Cut Round Face × Double Cut Flat Face







				Rigid

				4"	7/16"	1/8"	—	Steel, Iron	4221A11	000000	———	0	———	0


				6 3/32"	9/16"	1/8"	Black Oxide	Steel, Iron	42605A41	00000	———	0	42605A46	000000
				8"	3/4"	3/16"	—	Steel, Iron	4221A13	00000	———	0	———	0
				8"	3/4"	3/16"	Black Oxide	Steel, Iron	———	0	———	0	42605A47	00000
				8 1/8"	3/4"	3/16"	Black Oxide	Steel, Iron	42605A42	00000	———	0	———	0
				10"	15/16"	1/4"	—	Steel, Iron	4221A14	00000	4221A24	000000	———	0
				10"	15/16"	1/4"	Black Oxide	Steel, Iron	42605A43	00000	———	0	42605A48	00000
				12"	1 1/8"	5/16"	—	Steel, Iron	4221A15	00000	4221A25	00000	———	0
				12"	1 1/8"	5/16"	Black Oxide	Steel, Iron	42605A44	00000	———	0	———	0
				14"	1 5/16"	5/16"	—	Steel, Iron	4221A16	00000	———	0	———	0
				14 1/4"	1 1/4"	3/8"	Black Oxide	Steel, Iron	42605A45	00000	———	0	———	0


				16"	1 1/2"	3/8"	—	Steel, Iron	4221A37	00000	———	0	———	0


				Single Cut Round Face × Double Cut Flat Face







								Rigid

								4"	7/16"	1/8"	—	Steel, Iron	———	0	———	0	4221A31	00000


								6"	9/16"	1/8"	—	Steel, Iron	———	0	4221A22	00000	4221A32	00000
								8"	3/4"	3/16"	—	Steel, Iron	———	0	———	0	4221A33	00000
								10"	15/16"	1/4"	—	Steel, Iron	———	0	———	0	4221A34	00000
								12"	1 1/8"	5/16"	—	Steel, Iron	———	0	———	0	4221A35	00000


								Single Cut Round Face × Single Cut Flat Face







												Rigid

												14"	1 5/16"	5/16"	—	Steel, Iron	4221A17	00000	———	0	———	0

Tapered Half Round

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

					For Medium Finish
	Lg.	Wd.	Thk.	For Use On		Each
Double Cut Round Face × Double Cut Flat Face







				Rigid

				4"	7/16"	1/8"	Steel, Iron	4221A21	000000


				14"	1 5/16"	7/16"	Steel, Iron	4221A26	00000

Precision Rectangular Files


	Double-Cut Face	Single-Cut Edge

Made to exacting measurements to ensure smoothness, these files are used for finishing delicate and intricate parts. They do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Straight Rectangle

Straight files are also known as pillar files.

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

Without Teeth—Edges without teeth protect adjacent surfaces when filing.

						For Coarse Finish (No. 00)		For Medium Finish (No. 0)		For Fine Finish (No. 1)		For Fine Finish (No. 2)		For Extra Fine Finish (No. 4)
	Lg.	Wd.	Thk.	Edge Tooth Style	For Use On		Each		Each		Each		Each		Each
Double Cut Flat Face







				Rigid

				4"	3/8"	3/32"	Flat Without Teeth	Steel, Iron	4251A18	000000	4251A19	000000	———	0	———	0	———	0


				4"	3/8"	7/64"	Flat Without Teeth	Steel, Iron	———	0	———	0	———	0	4251A22	000000	4251A23	000000
				6"	31/64"	11/64"	Flat Without Teeth	Steel, Iron	4251A26	00000	———	0	———	0	4251A29	00000	4251A31	00000
				6"	33/64"	5/32"	Flat Without Teeth	Steel, Iron	———	0	4251A27	00000	———	0	———	0	———	0
				8"	19/32"	13/64"	Flat Without Teeth	Steel, Iron	4251A34	00000	4251A35	00000	4251A36	000000	4251A37	00000	4251A38	00000
				10"	45/64"	15/64"	Flat Without Teeth	Steel, Iron	4251A41	00000	4251A42	00000	———	0	———	0	———	0
				12"	3/4"	1/4"	Flat Without Teeth	Steel, Iron	4251A43	00000	4251A44	00000	———	0	———	0	———	0

Thin-Tapered Rectangle

Thin-Tapered

Rectangle

Thin tapered files taper extremely toward the point to fit tight spaces. Also known as warding files.

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

Single-Cut Edge—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

						For Coarse Finish (No. 00)		For Medium Finish (No. 0)		For Fine Finish (No. 2)		For Extra Fine Finish (No. 4)
	Lg.	Wd.	Thk.	Edge Tooth Style	For Use On		Each		Each		Each		Each
Double Cut Flat Face







				Rigid

				4"	31/64"	3/64"	Flat Single Cut	Steel, Iron	4259A15	000000	4259A16	000000	———	0	4259A31	000000


				4"	33/64"	3/32"	Flat Single Cut	Steel, Iron	———	0	———	0	4259A17	000000	———	0
				6"	5/8"	5/64"	Flat Single Cut	Steel, Iron	4259A18	00000	4259A32	00000	4259A33	00000	4259A34	00000
				8"	7/8"	11/64"	Flat Single Cut	Steel, Iron	4259A35	00000	4259A24	00000	4259A25	00000	———	0

Needle Files

The small tip allows precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Straight Rectangle

Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

Single Cut—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

						For Medium Finish (No. 0)		For Fine Finish (No. 2)		For Extra Fine Finish (No. 4)
	Lg.	Wd.	Thk.	Edge Tooth Style	For Use On		Each		Each		Each
Double Cut







				Rigid

				3 1/4"	0.213"	0.047"	Single Cut	Steel, Iron	4261A57	000000	4261A58	000000	4261A59	000000

Tapered Rectangle

Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

Single Cut—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

						For Medium Finish (No. 0)		For Fine Finish (No. 2)		For Extra Fine Finish (No. 4)
	Lg.	Wd.	Thk.	Edge Tooth Style	For Use On		Each		Each		Each
Double Cut







				Rigid

				3 1/4"	0.215"	0.047"	Single Cut	Steel, Iron	4261A35	000000	4261A36	000000	———	0


				3 1/2"	0.215"	0.047"	Single Cut	Steel, Iron	———	0	———	0	4261A37	000000

Tapered Half Round

Half-round files can be used on concave, convex, and flat surfaces.

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

					For Medium Finish (No. 0)		For Fine Finish (No. 2)		For Extra Fine Finish (No. 4)
	Lg.	Wd.	Thk.	For Use On		Each		Each		Each
Double Cut Round Face × Double Cut Flat Face







				Rigid

				3 1/4"	0.22"	0.069"	Steel, Iron	4261A31	000000	4261A32	000000	4261A33	000000

Tapered Round

Round files are good for filing holes and concave surfaces.

Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

				For Medium Finish (No. 0)		For Fine Finish (No. 2)		For Extra Fine Finish (No. 4)
	Lg.	Dia.	For Use On		Each		Each		Each
Double Cut







				Rigid

				3 1/4"	0.115"	Steel, Iron	4261A26	000000	4261A27	000000	4261A28	000000

Tapered Triangle

Triangular files have three filing surfaces to work in spots others can't.

Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

				For Medium Finish (No. 0)		For Fine Finish (No. 2)		For Extra Fine Finish (No. 4)
	Lg.	Wd.	For Use On		Each		Each		Each
Double Cut







				Rigid

				2 1/4"	0.083"	Steel, Iron	———	0	———	0	4261A55	000000


				3 1/4"	0.154"	Steel, Iron	4261A53	000000	4261A54	000000	———	0

Tapered Square

Square files are good for slots, keyways, grooves, and corners.

Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

				For Medium Finish (No. 0)		For Fine Finish (No. 2)		For Extra Fine Finish (No. 4)
	Lg.	Wd.	For Use On		Each		Each		Each
Double Cut







				Rigid

				3"	0.094"	Steel, Iron	———	0	———	0	4261A51	000000


				3 1/4"	0.094"	Steel, Iron	———	0	4261A49	000000	———	0
				3 1/2"	0.094"	Steel, Iron	4261A48	000000	———	0	———	0

Tapered Knife

Knife files get into tight angles, corners, and slots.

Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

Single-Cut Edge—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

						For Medium Finish (No. 0)		For Extra Fine Finish (No. 4)
	Lg.	Wd.	Thk.	Edge Tooth Style	For Use On		Each		Each
Double Cut







				Rigid

				3"	0.213"	0.059"	Single Cut Knife Edge × Thick Edge Without Teeth	Steel, Iron	———	0	4261A46	000000


				3 1/4"	0.213"	0.059"	Single Cut Knife Edge × Thick Edge Without Teeth	Steel, Iron	4261A44	000000	———	0

Tapered Barrette

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

					For Medium Finish (No. 0)		For Extra Fine Finish (No. 4)
	Lg.	Wd.	Thk.	For Use On		Each		Each
Double Cut × Without Teeth × Without Teeth







				Rigid

				3"	0.201"	0.071"	Steel, Iron	———	0	4261A64	000000


				3 1/4"	0.201"	0.071"	Steel, Iron	4261A62	000000	———	0

Tapered Crossing

Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

					For Extra Fine Finish (No. 4)
	Lg.	Wd.	Thk.	For Use On		Each
Double Cut







				Rigid

				3 1/2"	0.201"	0.079"	Steel, Iron	4261A42	000000

Straight Joint

Double-Cut Edge—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

						For Medium Finish (No. 0)		For Fine Finish (No. 2)		For Extra Fine Finish (No. 4)
	Lg.	Wd.	Thk.	Edge Tooth Style	For Use On		Each		Each		Each
Without Teeth







				Rigid

				3"	0.209"	0.051"	Double Cut × Double Cut	Steel, Iron	4261A66	000000	4261A67	000000	4261A68	000000

Straight Slitting

Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

					For Medium Finish (No. 0)		For Fine Finish (No. 2)		For Extra Fine Finish (No. 4)
	Lg.	Wd.	Thk.	For Use On		Each		Each		Each
Double Cut







				Rigid

				3"	0.236"	0.086"	Steel, Iron	———	0	4261A74	000000	4261A73	000000


				3 1/4"	0.236"	0.086"	Steel, Iron	4261A71	000000	———	0	———	0

Tapered Marking

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

					For Medium Finish (No. 0)		For Fine Finish (No. 2)		For Extra Fine Finish (No. 4)
	Lg.	Wd.	Thk.	For Use On		Each		Each		Each
Double Cut × None







				Rigid

				3"	0.209"	0.071"	Steel, Iron	4261A75	000000	4261A76	000000	4261A77	000000

Diamond Needle Files

The hardest files available, these are the longest lasting and strong enough to file hard materials. The small tip allows precise work in tight spots.

Straight Rectangle

1.563" Diamond Surface Length—Files with 1.563" diamond surface length are also known as escapement files.

					For Coarse Finish (80 to 100 Grit)		For Medium Finish (120 to 150 Grit)		For Fine Finish (150 to 180 Grit)
Diamond Surface Lg.	Lg.	Wd.	Thk.	For Use On		Each		Each		Each







			Rigid

			1.563"	5 1/2"	0.154"	0.043"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Bricks	4252A36	000000	4252A35	000000	4252A34	000000


			2.75"	5 1/2"	0.201"	0.055"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Bricks	4279A18	00000	4279A9	00000	4279A1	00000

Thin-Tapered Rectangle

Thin-Tapered

Rectangle

					For Coarse Finish (80 to 100 Grit)		For Medium Finish (120 to 150 Grit)		For Fine Finish (150 to 180 Grit)
Diamond Surface Lg.	Lg.	Wd.	Thk.	For Use On		Each		Each		Each







			Rigid

			2.75"	5 1/2"	0.205"	0.055"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Bricks	4279A43	000000	4279A42	000000	4279A41	000000

Tapered Half Round

Tapered Half

Round

Half-round files can be used on concave, convex, and flat surfaces.

1.563" Diamond Surface Length—Files with 1.563" diamond surface length are also known as escapement files.

					For Coarse Finish (80 to 100 Grit)		For Medium Finish (120 to 150 Grit)		For Fine Finish (150 to 180 Grit)
Diamond Surface Lg.	Lg.	Wd.	Thk.	For Use On		Each		Each		Each







			Rigid

			1.563"	5 1/2"	0.169"	0.071"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Bricks	4252A56	000000	4252A55	000000	4252A54	000000


			2.75"	5 1/2"	0.213"	0.075"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Bricks	4279A19	00000	4279A12	00000	4279A2	00000

Tapered Round

Round files are good for filing holes and concave surfaces.

1.563" Diamond Surface Length—Files with 1.563" diamond surface length are also known as escapement files.

				For Coarse Finish (80 to 100 Grit)		For Medium Finish (120 to 150 Grit)		For Fine Finish (150 to 180 Grit)
Diamond Surface Lg.	Lg.	Dia.	For Use On		Each		Each		Each







			Rigid

			1.563"	5 1/2"	0.067"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Bricks	4252A26	000000	4252A25	000000	4252A24	000000


			2.75"	5 1/2"	0.118"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Bricks	4279A22	00000	4279A15	00000	4279A5	00000

Tapered Triangle

Triangular files have three filing surfaces to work in spots others can't.

1.563" Diamond Surface Length—Files with 1.563" diamond surface length are also known as escapement files.

				For Coarse Finish (80 to 100 Grit)		For Medium Finish (120 to 150 Grit)		For Fine Finish (150 to 180 Grit)
Diamond Surface Lg.	Lg.	Wd.	For Use On		Each		Each		Each







			Rigid

			1.563"	5 1/2"	0.122"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Bricks	4252A46	000000	4252A45	000000	4252A44	000000


			2.75"	5 1/2"	0.154"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Bricks	4279A21	00000	4279A13	00000	4279A3	00000

Tapered Square

Square files are good for slots, keyways, grooves, and corners.

1.563" Diamond Surface Length—Files with 1.563" diamond surface length are also known as escapement files.

				For Coarse Finish (80 to 100 Grit)		For Medium Finish (120 to 150 Grit)		For Fine Finish (150 to 180 Grit)
Diamond Surface Lg.	Lg.	Wd.	For Use On		Each		Each		Each







			Rigid

			1.563"	5 1/2"	0.079"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Bricks	4252A66	000000	4252A65	000000	4252A64	000000

Tapered Knife

Knife files get into tight angles, corners, and slots.

					For Coarse Finish (80 to 100 Grit)		For Medium Finish (120 to 150 Grit)		For Fine Finish (150 to 180 Grit)
Diamond Surface Lg.	Lg.	Wd.	Thk.	For Use On		Each		Each		Each







			Rigid

			2.75"	5 1/2"	0.213"	0.063"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Bricks	4279A23	000000	4279A16	000000	4279A6	000000

Tapered Barrette

1.563" Diamond Surface Length—Files with 1.563" diamond surface length are also known as escapement files.

					For Coarse Finish (80 to 100 Grit)		For Medium Finish (120 to 150 Grit)		For Fine Finish (150 to 180 Grit)
Diamond Surface Lg.	Lg.	Wd.	Thk.	For Use On		Each		Each		Each







			Rigid

			1.563"	5 1/2"	0.154"	0.055"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Bricks	4252A86	000000	4252A85	000000	4252A84	000000


			2.75"	5 1/2"	0.197"	0.067"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Bricks	4279A39	00000	4279A38	00000	4279A37	00000

Tapered Crossing

1.563" Diamond Surface Length—Files with 1.563" diamond surface length are also known as escapement files.

					For Coarse Finish (80 to 100 Grit)		For Medium Finish (120 to 150 Grit)		For Fine Finish (150 to 180 Grit)
Diamond Surface Lg.	Lg.	Wd.	Thk.	For Use On		Each		Each		Each







			Rigid

			1.563"	5 1/2"	0.165"	0.071"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Bricks	4252A76	000000	4252A75	000000	4252A74	000000

Rectangular Diamond Files

Diamond abrasive makes these the hardest, strongest, and longest-lasting files available. Use them to shape and smooth titanium and other tough materials.

Straight Rectangle


1 1/2" Diamond Surface Length	1 13/16" Diamond Surface Length	4 5/16" Diamond Surface Length

Smooth Edge—Smooth faces and edges won’t scratch nearby surfaces when you’re filing.

							For Coarse Finish (80 to 100 Grit)			For Medium Finish (120 to 150 Grit)			For Fine Finish (150 to 180 Grit)
	Diamond Surface Lg.	Face Shape (File Type)	Edge Shape (Edge Texture)	Lg.	Wd.	For Use On	Thk.		Each	Thk.		Each	Thk.		Each
Rigid



		1 1/2"	Flat (Abrasive Grit) × Flat (Abrasive Grit)	Flat (Abrasive) × Flat (Abrasive)	6"	1/4"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Glass, Carbide, Carbon Fiber, Graphite	1/8"	8168A61	000000	1/8"	8168A51	000000	1/8"	8168A42	000000


		1 1/2"	Flat (Abrasive Grit) × Flat (Abrasive Grit)	Flat (Abrasive) × Flat (Abrasive)	6"	3/8"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Glass, Carbide, Carbon Fiber, Graphite	1/8"	8168A62	00000	1/8"	8168A52	00000	1/8"	8168A43	00000
		1 13/16"	Flat (Abrasive Grit) × Flat (Abrasive Grit)	Flat (Abrasive) × Flat (Abrasive)	3 3/8"	1/16"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Glass, Carbide, Carbon Fiber, Graphite	1/16"	9712N14	00000	1/16"	9712N15	00000	1/16"	9712N16	00000
		1 13/16"	Flat (Abrasive Grit) × Flat (Abrasive Grit)	Flat (Smooth) × Flat (Smooth)	3 3/8"	1/16"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Glass, Carbide, Carbon Fiber, Graphite	—	———	0	—	———	0	1/16"	9712N13	00000
		1 13/16"	Flat (Abrasive Grit) × Flat (Smooth)	Flat (Smooth) × Flat (Smooth)	3 3/8"	1/16"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Glass, Carbide, Carbon Fiber, Graphite	1/16"	9712N11	00000	1/16"	9712N12	00000	—	———	0
		4 5/16"	Flat (Abrasive Grit) × Flat (Abrasive Grit)	Flat (Abrasive) × Flat (Abrasive)	8 1/2"	7/16"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Glass, Carbide, Carbon Fiber, Graphite	1/8"	4243A24	00000	1/8"	4243A22	00000	1/8"	4243A25	00000

Precision File Sets

Made to exacting measurements, the files in these sets give you precise control over how much material you remove. Also known as Swiss-pattern files, they create more consistent finishes than American-pattern files. Use them for smoothing intricate parts and other applications where accuracy is key. All files are double cut, which means their surface has two sets of diagonal teeth. They remove material more quickly than single cut files, but you’ll need to use heavier pressure.

5 Pieces


Straight Rectangle	Half Round

Round	Tapered Triangle

Tapered Square

File Cut No.	Includes	File Shape	Handle Material	Container Type	For Use On		Each
00	One Coarse-Finish Rectangular File with Double-Cut Faces—8 1/2" Lg. One Coarse-Finish Tapered Half-Round File with Double-Cut Faces—8 1/2" Lg. One Coarse-Finish Tapered Round File with Double-Cut Face—8 1/2" Lg. One Coarse-Finish Tapered Triangular File with Double-Cut Faces—8 1/2" Lg. One Coarse-Finish Tapered Square File with Double-Cut Faces—8 1/2" Lg.	Straight Rectangle Taper Half Round Tapered Round Tapered Triangle Tapered Square	Steel	Plastic Pouch	Steel, Iron	8194A11	000000
1	One Fine-Finish Rectangular File with Double-Cut Faces—8 1/2" Lg. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—8 1/2" Lg. One Fine-Finish Tapered Round File with Double-Cut Face—8 1/2" Lg. One Fine-Finish Tapered Triangular File with Double-Cut Faces—8 1/2" Lg. One Fine-Finish Tapered Square File with Double-Cut Faces—8 1/2" Lg.	Straight Rectangle Taper Half Round Tapered Round Tapered Triangle Tapered Square	Steel	Plastic Pouch	Steel, Iron	8194A12	00000

6 Pieces


Straight Rectangle	Thin-Tapered Rectangle	Half Round

Round	Straight Triangle	Straight Square

Straight Knife

File Cut No.	Includes	File Shape	Container Type	For Use On		Each
0	One Medium-Finish Rectangular File with Double-Cut Faces—4" Lg. One Medium-Finish Thin-Tapered Rectangular File with Double-Cut Faces—4" Lg. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—4" Lg. One Medium-Finish Tapered Round File with Double-Cut Face—4" Lg. One Medium-Finish Triangular File with Double-Cut Faces—4" Lg. One Medium-Finish Square File with Double-Cut Faces—4" Lg.	Straight Rectangle Thin-Tapered Rectangle Tapered Half Round Tapered Round Straight Triangle Straight Square	—	Steel, Iron	8194A111	0000000
0	One Medium-Finish Rectangular File with Double-Cut Faces—6" Lg. One Medium-Finish Thin-Tapered Rectangular File with Double-Cut Faces—6" Lg. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6" Lg. One Medium-Finish Tapered Round File with Double-Cut Face—6" Lg. One Medium-Finish Triangular File with Double-Cut Faces—6" Lg. One Medium-Finish Knife File with Double-Cut Faces—6" Lg.	Straight Rectangle Thin-Tapered Rectangle Tapered Half Round Tapered Round Straight Triangle Straight Knife	Plastic Pouch	Steel, Iron	42365A21	000000
2	One Fine-Finish Rectangular File with Double-Cut Faces—6" Lg. One Fine-Finish Thin-Tapered Rectangular File with Double-Cut Faces—6" Lg. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6" Lg. One Fine-Finish Tapered Round File with Double-Cut Face—6" Lg. One Fine-Finish Triangular File with Double-Cut Faces—6" Lg. One Fine-Finish Knife File with Double-Cut Faces—6" Lg.	Straight Rectangle Thin-Tapered Rectangle Tapered Half Round Tapered Round Straight Triangle Straight Knife	Plastic Pouch	Steel, Iron	42365A22	000000
4	One Extra Fine-Finish Rectangular File with Double-Cut Faces—6" Lg. One Extra Fine-Finish Thin-Tapered Rectangular File with Double-Cut Faces—6" Lg. One Extra Fine-Finish Tapered Half-Round File with Double-Cut Faces—6" Lg. One Extra Fine-Finish Tapered Round File with Double-Cut Face—6" Lg. One Extra Fine-Finish Triangular File with Double-Cut Faces—6" Lg. One Extra Fine-Finish Knife File with Double-Cut Faces—6" Lg.	Straight Rectangle Thin-Tapered Rectangle Tapered Half Round Tapered Round Straight Triangle Straight Knife	Plastic Pouch	Steel, Iron	42365A23	000000

Round Files

Good for filing holes and concave surfaces, these are also known as rat-tail files. Files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Tapered Round

Single Cut

Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

Single Cut—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

Black Oxide—Black-oxide finish resists rust and clogging.

				For Coarse Finish			For Medium Finish			For Fine Finish
	Lg.	Finish	For Use On	Dia.		Each	Dia.		Each	Dia.		Each
Double Cut







				Rigid

				6"	Black Oxide	Steel, Iron	7/32"	42605A53	00000	—	———	0	7/32"	42605A57	00000


				8"	Black Oxide	Steel, Iron	5/16"	42605A54	0000	—	———	0	5/16"	42605A58	00000
				10"	Black Oxide	Steel, Iron	3/8"	42605A55	00000	—	———	0	—	———	0
				12"	Black Oxide	Steel, Iron	1/2"	42605A56	00000	—	———	0	—	———	0
				14"	—	Steel, Iron	—	———	0	5/8"	4233A29	000000	5/8"	4233A31	00000


				Single Cut







								Rigid

								4"	—	Steel, Iron	1/8"	4233A11	0000	5/32"	4233A17	0000	1/8"	4233A24	00000


								6"	—	Steel, Iron	1/4"	4233A12	0000	1/4"	4233A18	00000	1/4"	4233A25	00000
								8"	—	Steel, Iron	5/16"	4233A13	00000	5/16"	4233A19	00000	5/16"	4233A26	00000
								10"	—	Steel, Iron	3/8"	4233A14	00000	3/8"	4233A21	00000	3/8"	4233A27	00000
								12"	—	Steel, Iron	1/2"	4233A15	00000	1/2"	4233A22	00000	1/2"	4233A28	00000

Integrated-Handle Rectangular Files

No need for a separate handle—these files have one built in. Length does not include the handle.

Straight Rectangle


Straight Rectangle	Double-Cut Face	Single-Cut Face	Single-Cut Face with Chip Breaker

Straight files are also known as hand files. Files with steel handles have a single-piece construction.

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

Single-Cut Face—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

Without Teeth—Edges without teeth protect adjacent surfaces when filing.

Black Oxide—Files with a black-oxide finish resist rust and clogging.

								For Coarse Finish		For Fine Finish
	Lg.	Wd.	Thk.	Edge Tooth Style	Finish	Handle Material	For Use On		Each		Each
Double Cut Flat Face × Double Cut Flat Face







				Rigid

				10"	15/16"	3/16"	Flat Single Cut × Flat Single Cut	—	Painted Steel	Steel, Iron	42405A513	000000	———	0


				10"	15/16"	3/16"	Flat Single Cut × Flat Single Cut	Black Oxide	Painted Steel	Steel, Iron	42405A42	00000	———	0


				Double Cut Flat Face × Single Cut Flat Face







								Rigid

								8"	15/16"	3/16"	Flat Without Teeth × Flat Without Teeth	—	Steel	Steel, Iron	42405A527	00000	———	0


								8"	15/16"	3/16"	Flat Single Cut × Flat Without Teeth	—	Steel	Steel, Iron	42405A528	00000	———	0
								8"	15/16"	3/16"	Flat Single Cut × Flat Without Teeth	Black Oxide	Painted Steel	Steel, Iron	42405A45	00000	———	0
								10"	15/16"	3/16"	Flat Single Cut × Flat Without Teeth	—	Painted Steel	Steel, Iron	42405A511	00000	———	0
								10"	15/16"	3/16"	Flat Single Cut × Flat Without Teeth	Black Oxide	Painted Steel	Steel, Iron	42405A44	00000	———	0
								12"	1 3/16"	3/16"	Flat Single Cut × Flat Without Teeth	—	Steel	Steel, Iron	42405A529	00000	———	0


								Single Cut Flat Face × Single Cut Flat Face







												Rigid

												10"	15/16"	3/16"	Flat Single Cut × Flat Single Cut	—	Painted Steel	Steel, Iron	42405A512	00000	———	0


												10"	15/16"	3/16"	Flat Single Cut × Flat Single Cut	Black Oxide	Painted Steel	Steel, Iron	42405A43	00000	———	0


												Single Cut Flat Face with Chip Breaker × Single Cut Flat Face with Chip Breaker







																Rigid

																10"	15/16"	3/16"	Flat Single Cut × Flat Single Cut	—	Painted Steel	Steel, Iron	———	0	42405A514	000000


10"																15/16"	3/16"	Flat Single Cut × Flat Single Cut	Black Oxide	Painted Steel	Steel, Iron	———	0	42405A41	00000

Tapered Rectangle


Tapered Rectangle	Double-Cut Face	Single-Cut Face

Files with rubber-coated plastic handles have a cushioned, comfortable grip.

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal. Double-cut tapered files are also known as flat files.

Single-Cut Face—Single-cut tapered files with teeth on the edges are often used to sharpen milling and circular saws. Also known as mill files.

Single-Cut Edge—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

Black Oxide—Files with a black-oxide finish resist rust and clogging.

								For Coarse Finish		For Medium Finish		For Fine Finish
	Lg.	Wd.	Thk.	Edge Tooth Style	Finish	Handle Material	For Use On		Each		Each		Each
Double Cut Flat Face × Double Cut Flat Face







				Rigid

				10"	15/16"	3/16"	Flat Single Cut × Flat Single Cut	—	Rubber-Coated Plastic	Steel, Iron	42405A522	000000	42405A523	000000	42405A524	000000


				10"	15/16"	3/16"	Flat Single Cut × Flat Single Cut	Black Oxide	Rubber-Coated Plastic	Steel, Iron	42405A516	00000	———	0	42405A517	00000


				Single Cut Flat Face × Single Cut Flat Face







								Rigid

								8"	13/16"	3/16"	Flat Single Cut × Flat Single Cut	—	Rubber-Coated Plastic	Steel, Iron	42405A521	00000	———	0	———	0


								8"	13/16"	3/16"	Flat Single Cut × Flat Single Cut	Black Oxide	Rubber-Coated Plastic	Steel, Iron	42405A515	00000	———	0	———	0
								10"	15/16"	3/16"	Flat Single Cut × Flat Single Cut	—	Rubber-Coated Plastic	Steel, Iron	42405A525	00000	———	0	42405A526	00000
								10"	15/16"	3/16"	Flat Single Cut × Flat Single Cut	Black Oxide	Rubber-Coated Plastic	Steel, Iron	42405A518	00000	———	0	42405A519	00000

Triangular Files

With three filing surfaces, these files work in spots others can't. They do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Tapered Triangle

Single Cut

Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

Single Cut—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and file between saw teeth.

Black Oxide—Black-oxide finish resists rust and clogging.

						For Coarse Finish		For Medium Finish		For Fine Finish
	Lg.	Wd.	For Saw Blade Teeth per In.	Finish	For Use On		Each		Each		Each
Double Cut







				Rigid

				6"	7/16"	—	Black Oxide	Steel, Iron	42605A59	000000	———	0	———	0


				6"	1/2"	—	—	Steel, Iron	4234A11	00000	4234A15	00000	4234A18	000000
				8"	1/2"	—	Black Oxide	Steel, Iron	42605A61	00000	———	0	———	0
				8"	5/8"	—	—	Steel, Iron	4234A12	00000	4234A16	00000	4234A19	00000
				10"	3/4"	—	—	Steel, Iron	4234A13	00000	4234A17	00000	4234A29	00000


				Single Cut







								Rigid

								4"	3/16"	8 to 14	—	Steel, Iron	———	0	———	0	4229A17	0000


								4"	1/4"	5 to 11	—	Steel, Iron	———	0	———	0	4229A11	0000
								5"	3/16"	12 to 16	—	Steel, Iron	———	0	———	0	4229A25	0000
								5"	1/4"	5 to 11	—	Steel, Iron	———	0	———	0	4229A12	0000
								6"	1/4"	8 to 14	—	Steel, Iron	———	0	———	0	4229A21	0000
								6"	1/4"	12 to 16	—	Steel, Iron	———	0	———	0	4229A26	0000
								6"	5/16"	5 to 11	—	Steel, Iron	———	0	———	0	4229A13	0000
								7"	3/8"	5 to 11	—	Steel, Iron	———	0	———	0	4229A14	0000
								7"	3/8"	8 to 14	—	Steel, Iron	———	0	———	0	4229A22	0000
								8"	3/8"	8 to 12	—	Steel, Iron	———	0	———	0	4229A23	0000
								8"	3/8"	12 to 16	—	Steel, Iron	———	0	———	0	4229A28	0000


								8"	1/2"	5 to 11	—	Steel, Iron	———	0	———	0	4229A15	00000

Square Files

File slots, keyways, grooves, and corners with these four-sided tools. They have two sets of diagonal teeth. Files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Tapered Square

				For Coarse Finish		For Medium Finish		For Fine Finish
	Lg.	Wd.	For Use On		Each		Each		Each
Double Cut







				Rigid

				4"	5/32"	Steel, Iron	4235A11	000000	4235A17	00000	4235A24	000000


				6"	1/4"	Steel, Iron	4235A12	00000	4235A18	0000	4235A25	00000
				8"	5/16"	Steel, Iron	4235A13	00000	4235A19	0000	4235A26	00000
				10"	3/8"	Steel, Iron	4235A14	00000	4235A21	00000	4235A27	00000
				12"	1/2"	Steel, Iron	4235A15	00000	4235A22	00000	4235A28	00000
				14"	5/8"	Steel, Iron	4235A29	00000	———	0	4235A31	00000

Diamond File Sets

The hardest files available, these are the longest lasting and strong enough to file hard materials.

5 Piece Set for Coarse Finish

Image of Product. Front orientation. Files. Diamond File Sets, 5 Pieces.


Rectangle	Half Round

Round	Triangle

Square

Includes	File Shape	For Use On		Each
One Coarse-Finish Rectangular File with 4.328" Lg. Diamond Surface—8.625" Lg. × 0.409" Wd. × 0.11" Thick. One Coarse-Finish Tapered Half-Round File with 4.328" Lg. Diamond Surface—8.625" Lg. × 0.496" Wd. × 0.154" Thick. One Coarse-Finish Tapered Round File with 4.328" Lg. Diamond Surface—8.625" Lg. × 0.268" Dia. One Coarse-Finish Tapered Triangular File with 4.328" Lg. Diamond Surface—8.625" Lg. × 0.382" Wd. One Coarse-Finish Tapered Square File with 4.328" Lg. Diamond Surface—8.625" Lg. × 0.24" Wd.	Straight Rectangle Taper Half Round Tapered Round Tapered Triangle Tapered Square	Titanium, Hardened Steel, Tool Steel, Nickel, Stone, Glass, Carbide, Carbon Fiber, Graphite	4243A72	0000000

5 Piece Set for Medium Finish


Rectangle	Half Round

Round	Triangle

Square

Includes	File Shape	For Use On		Each
One Medium-Finish Rectangular File with 4.328" Lg. Diamond Surface—8.625" Lg. × 0.409" Wd. × 0.11" Thick. One Medium-Finish Tapered Half-Round File with 4.328" Lg. Diamond Surface—8.625" Lg. × 0.496" Wd. × 0.154" Thick. One Medium-Finish Tapered Round File with 4.328" Lg. Diamond Surface—8.625" Lg. × 0.268" Dia. One Medium-Finish Tapered Triangular File with 4.328" Lg. Diamond Surface—8.625" Lg. × 0.382" Wd. One Medium-Finish Tapered Square File with 4.328" Lg. Diamond Surface—8.625" Lg. × 0.24" Wd.	Straight Rectangle Taper Half Round Tapered Round Tapered Triangle Tapered Square	Titanium, Hardened Steel, Tool Steel, Nickel, Stone, Glass, Carbide, Carbon Fiber, Graphite	4243A71	0000000

5 Piece Set for Fine Finish


Rectangle	Half Round

Round	Triangle

Square

Includes	File Shape	For Use On		Each
One Fine-Finish Rectangular File with 4.328" Lg. Diamond Surface—8.625" Lg. × 0.409" Wd. × 0.11" Thick. One Fine-Finish Tapered Half-Round File with 4.328" Lg. Diamond Surface—8.625" Lg. × 0.496" Wd. × 0.154" Thick. One Fine-Finish Tapered Round File with 4.328" Lg. Diamond Surface—8.625" Lg. × 0.268" Dia. One Fine-Finish Tapered Triangular File with 4.328" Lg. Diamond Surface—8.625" Lg. × 0.382" Wd. One Fine-Finish Tapered Square File with 4.328" Lg. Diamond Surface—8.625" Lg. × 0.24" Wd.	Straight Rectangle Taper Half Round Tapered Round Tapered Triangle Tapered Square	Titanium, Hardened Steel, Tool Steel, Nickel, Stone, Glass, Carbide, Carbon Fiber, Graphite	4243A73	0000000

6 Piece Set for Coarse Finish

Image of Product. Front orientation. Files. Diamond File Sets, 6 Pieces.


Rectangle	Round

Triangle	Square

Point

Includes	File Shape	For Use On		Each
One Coarse-Finish Rectangular File with 1.5" Lg. Diamond Surface—6" Lg. × 0.25" Wd. × 0.125" Thick. One Coarse-Finish Rectangular File with 1.5" Lg. Diamond Surface—6" Lg. × 0.375" Wd. × 0.125" Thick. One Coarse-Finish Round File with 1.5" Lg. Diamond Surface—6" Lg. × 0.125" Dia. One Coarse-Finish Triangular File with 1.5" Lg. Diamond Surface—6" Lg. × 0.125" Wd. One Coarse-Finish Square File with 1.5" Lg. Diamond Surface—6" Lg. × 0.125" Wd. One Coarse-Finish Tapered Point File with 0.5"-0.875" Lg. Diamond Surface—6" Lg. × 0.125" Wd.	Straight Rectangle Straight Round Straight Triangle Straight Square Tapered Point	Titanium, Hardened Steel, Tool Steel, Nickel, Stone, Glass, Carbide, Carbon Fiber, Graphite	8168A68	0000000

6 Piece Set for Medium Finish


Rectangle	Round

Triangle	Square

Point

Includes	File Shape	For Use On		Each
One Medium-Finish Rectangular File with 1.5" Lg. Diamond Surface—6" Lg. × 0.25" Wd. × 0.125" Thick. One Medium-Finish Rectangular File with 1.5" Lg. Diamond Surface—6" Lg. × 0.375" Wd. × 0.125" Thick. One Medium-Finish Round File with 1.5" Lg. Diamond Surface—6" Lg. × 0.125" Dia. One Medium-Finish Triangular File with 1.5" Lg. Diamond Surface—6" Lg. × 0.125" Wd. One Medium-Finish Square File with 1.5" Lg. Diamond Surface—6" Lg. × 0.125" Wd. One Medium-Finish Tapered Point File with 0.5"-0.875" Lg. Diamond Surface—6" Lg. × 0.125" Wd.	Straight Rectangle Straight Round Straight Triangle Straight Square Tapered Point	Titanium, Hardened Steel, Tool Steel, Nickel, Stone, Glass, Carbide, Carbon Fiber, Graphite	8168A57	0000000

6 Piece Set for Fine Finish


Rectangle	Round

Triangle	Square

Point

Includes	File Shape	For Use On		Each
One Fine-Finish Rectangular File with 1.5" Lg. Diamond Surface—6" Lg. × 0.25" Wd. × 0.125" Thick. One Fine-Finish Rectangular File with 1.5" Lg. Diamond Surface—6" Lg. × 0.375" Wd. × 0.125" Thick. One Fine-Finish Round File with 1.5" Lg. Diamond Surface—6" Lg. × 0.125" Dia. One Fine-Finish Triangular File with 1.5" Lg. Diamond Surface—6" Lg. × 0.125" Wd. One Fine-Finish Square File with 1.5" Lg. Diamond Surface—6" Lg. × 0.125" Wd. One Fine-Finish Tapered Point File with 0.5"-0.875" Lg. Diamond Surface—6" Lg. × 0.125" Wd.	Straight Rectangle Straight Round Straight Triangle Straight Square Tapered Point	Titanium, Hardened Steel, Tool Steel, Nickel, Stone, Glass, Carbide, Carbon Fiber, Graphite	8168A47	0000000

Rectangular Files for Aluminum and Soft Metal

The specially designed teeth resist clogging on soft metals. These files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Tapered Rectangle

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

Single-Cut Edge—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

						For Fine Finish
	Lg.	Wd.	Thk.	Edge Tooth Style	For Use On		Each
Double Cut Flat Face







				Rigid

				8"	3/4"	3/16"	Flat Single Cut	Aluminum, Brass, Bronze, Copper	4218A12	000000


				10"	15/16"	1/4"	Flat Single Cut	Aluminum, Brass, Bronze, Copper	4218A13	00000
				12"	1 1/8"	1/4"	Flat Single Cut	Aluminum, Brass, Bronze, Copper	4218A14	00000

Detail Files

Reach into the smallest holes, grooves, and slots to perform detailed work. These tools have a file at each end and a smooth portion in the middle for a comfortable grip. Also known as riffler files.

Detail


1	4	5	6

7	8	9	11

12	15	16	18

Trade Number							For Medium Finish (No. 0)		For Fine Finish (No. 2)
Nicholson	Simonds	Grobet	Lg.	Dia.	Wd.	For Use On		Each		Each







			Rigid

			1	DSR-1	541	6"	0.124"	—	Steel, Iron	4278A24	000000	4278A25	000000


			4	DSR-4	529	6"	—	0.163"	Steel, Iron	4278A27	00000	4278A28	00000
			5	DSR-5	525	6"	—	0.076"	Steel, Iron	4278A31	00000	4278A32	00000
			6	DSR-6	526	6"	—	0.053"	Steel, Iron	4278A34	00000	4278A35	00000
			7	DSR-7	533	6"	—	0.2"	Steel, Iron	4278A37	00000	4278A38	00000
			8	DSR-8	532	6"	—	0.173"	Steel, Iron	4278A41	00000	4278A42	00000
			9	DSR-9	542	6"	0.128"	—	Steel, Iron	4278A44	00000	4278A45	00000
			11	DSR-11	531	6"	—	0.189"	Steel, Iron	4278A47	00000	4278A48	00000
			12	DSR-12	527	6"	—	0.059"	Steel, Iron	4278A51	00000	4278A52	00000
			15	DSR-15	537	6"	—	0.077"	Steel, Iron	4278A54	00000	4278A55	00000
			16	DSR-16	539	6"	—	0.152"	Steel, Iron	4278A57	00000	4278A58	00000


			18	DSR-18	536	6"	—	0.14"	Steel, Iron	4278A61	00000	4278A62	00000

Integrated-Handle Rectangular Diamond Files

The plastic handle provides a comfortable grip. Diamond is the hardest, longest-lasting abrasive available and strong enough to file hard materials.

Straight Rectangle

						For Coarse/Medium Finish (100 Grit)
	Diamond Surface Lg.	Lg.	Wd.	Handle Material	For Use On	Thk.		Each
Rigid



		7.125"	12 1/2"	7/8"	Plastic	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Bricks	7/32"	42345A12	0000000

Economy Needle File Sets

These files are for infrequent use. The small tips allow precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length includes the tang.

6 Pieces—5 1/2" Long


Straight Rectangle	Tapered Rectangle

Half Round	Round

Triangle	Square

File Cut No.	Includes	File Shape	For Use On		Each
0	One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square	Steel, Iron	8174A52	00000
2	One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square	Steel, Iron	8174A53	0000
4	One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square	Steel, Iron	8174A54	0000

6 Pieces—6 1/4" Long


Straight Rectangle	Tapered Rectangle

Half Round	Round

Triangle	Square

File Cut No.	Includes	File Shape	For Use On		Each
0	One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square	Steel, Iron	8174A55	00000
2	One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square	Steel, Iron	8174A56	0000
4	One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square	Steel, Iron	8174A57	0000

12 Pieces—5 1/2" Long

Image of Product. Front orientation. Files. Economy Needle File Sets, 12 Pieces.


Straight Rectangle	Tapered Rectangle	Half Round	Round

Triangle	Square	Knife	Barrette

Crossing	Joint	Marking	Slitting

File Cut No.	Includes	File Shape	For Use On		Each
0	One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.202" Wd. × 0.067" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. One Medium-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Steel, Iron	8174A41	000000
2	One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. One Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Steel, Iron	8174A42	00000
4	One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Steel, Iron	8174A51	00000

12 Pieces—6 1/4" Long


Straight Rectangle	Tapered Rectangle	Half Round	Round

Triangle	Square	Knife	Barrette

Crossing	Joint	Marking	Slitting

File Cut No.	Includes	File Shape	For Use On		Each
0	One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. One Medium-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Steel, Iron	8174A45	000000
2	One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. One Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Steel, Iron	8174A46	00000
4	One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg.×0.213" Wd.×0.059" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Steel, Iron	8174A47	00000

Flexible Diamond Needle Files

Wire-thin and easy to bend, these files reach tight spots in delicate workpieces, yet they're strong enough to shape hard metal, such as titanium. They're made of diamond—the hardest, longest-lasting abrasive available.

Straight Round

			For Fine Finish (150 to 180 Grit)			For Extra Fine Finish (240 to 320 Grit)			For Extra Fine Finish (500 to 600 Grit)
Diamond Surface Lg.	Lg.	For Use On	Dia.		Each	Dia.		Each	Dia.		Each







			Flexible

			2.756"	5 1/8"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Bricks	0.024"	1055N15	000000	0.02"	1055N14	000000	0.016"	1055N13	000000


			2.756"	5 1/8"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Bricks	0.028"	1055N16	00000	—	———	0	—	———	0
			2.756"	5 1/8"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Bricks	0.031"	1055N17	00000	—	———	0	—	———	0
			2.756"	5 1/8"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Bricks	0.039"	1055N18	00000	—	———	0	—	———	0
			2.756"	5 1/8"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Bricks	0.059"	1055N19	00000	—	———	0	—	———	0
			2.756"	5 1/8"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Bricks	0.079"	1055N21	00000	—	———	0	—	———	0

Knife Files

Get into tight angles, corners, and slots. These files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Tapered Knife

Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

Single-Cut Edge—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

Without Teeth—Edges without teeth protect adjacent surfaces when filing.

Black Oxide—Black-oxide finish resists rust and clogging.

							For Coarse Finish		For Medium Finish		For Fine Finish
	Lg.	Wd.	Thk.	Edge Tooth Style	Finish	For Use On		Each		Each		Each
Double Cut







				Rigid

				4"	1/2"	1/8"	Single Cut Knife Edge × Thick Edge Without Teeth	—	Steel, Iron	4236A11	000000	4236A15	000000	4236A19	000000


				6"	11/16"	1/8"	Single Cut Knife Edge × Thick Edge Without Teeth	—	Steel, Iron	4236A12	00000	4236A16	00000	4236A21	00000
				7 3/4"	11/16"	3/16"	Single Cut Knife Edge × Thick Edge Without Teeth	Black Oxide	Steel, Iron	42605A49	00000	———	0	———	0
				8"	13/16"	3/16"	Single Cut Knife Edge × Thick Edge Without Teeth	—	Steel, Iron	4236A13	00000	4236A17	00000	4236A22	00000
				10"	13/16"	3/16"	Single Cut Knife Edge × Thick Edge Without Teeth	Black Oxide	Steel, Iron	42605A51	00000	———	0	———	0
				10"	1"	1/4"	Single Cut Knife Edge × Thick Edge Without Teeth	—	Steel, Iron	4236A14	00000	4236A18	00000	4236A23	00000
				12"	1 1/4"	1/4"	Single Cut Knife Edge × Thick Edge Without Teeth	—	Steel, Iron	4236A25	00000	———	0	———	0

Round Diamond Files

Good for filing holes and concave surfaces. Diamond is the hardest, longest-lasting abrasive available and strong enough to file hard materials.

Straight Round


Straight Round	1.5" Diamond Surface Length

					For Coarse Finish (80 to 100 Grit)		For Medium Finish (120 to 150 Grit)		For Fine Finish (150 to 180 Grit)
	Diamond Surface Lg.	Lg.	Dia.	For Use On		Each		Each		Each
Rigid



		1.5"	6"	1/8"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Glass, Carbide, Carbon Fiber, Graphite	8168A63	000000	8168A53	000000	8168A44	000000

Tapered Round


Tapered Round	1.772" Diamond Surface Length	4.33" Diamond Surface Length

					For Coarse Finish (80 to 100 Grit)		For Medium Finish (120 to 150 Grit)		For Fine Finish (150 to 180 Grit)
	Diamond Surface Lg.	Lg.	Dia.	For Use On		Each		Each		Each
Rigid



		1.772"	3 3/8"	0.118"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Glass, Carbide, Carbon Fiber, Graphite	4243A123	000000	4243A122	000000	4243A121	000000


		4.33"	8 1/2"	0.268"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Glass, Carbide, Carbon Fiber, Graphite	4243A44	00000	4243A42	00000	4243A45	00000

Nonsparking Rectangular Files


	Double-Cut Face

Made from beryllium copper, these files won’t create sparks as you smooth and shape workpieces. They’re also nonmagnetic. They help you meet OSHA requirements for using nonsparking tools in areas where flammable vapor or combustible residue are present. These files have two sets of diagonal teeth for rapid material removal. The handle is coated in rubber to cushion your grip. Length does not include the handle.

Straight Rectangle

Image of Specification. Front orientation. Rectangle. Nonsparking Rectangular Files, Straight File.

Straight Rectangle

								For Coarse Finish
	Lg.	Wd.	Thk.	Edge Tooth Style	Material	Handle Material	For Use On		Each
Double Cut Flat Face







				Rigid

				8"	3/4"	1/4"	Flat Without Teeth	Beryllium Copper	Rubber-Coated Plastic	Steel, Iron	9759N101	0000000

Rectangular Files for Stainless Steel

File stainless steel with little to no clogging. These corrosion-resistant files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Straight Rectangle

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

Single-Cut Edge—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

Without Teeth—Edges without teeth protect adjacent surfaces when filing.

						For Coarse Finish		For Medium Finish		For Fine Finish
	Lg.	Wd.	Thk.	Edge Tooth Style	For Use On		Each		Each		Each
Double Cut Flat Face







				Rigid

				6"	3/4"	3/16"	Flat Single Cut × Flat Without Teeth	Stainless Steel	8248A11	000000	8248A12	000000	———	0


				8"	7/8"	3/16"	Flat Single Cut × Flat Without Teeth	Stainless Steel	8248A13	00000	8248A14	00000	8248A15	000000

Precision Triangular Files

Made to exacting measurements to ensure smoothness, these files are used for finishing delicate and intricate parts. They have three filing surfaces with two sets of diagonal teeth to work in spots others can't. Files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Tapered Triangle

			For Coarse Finish (No. 00)			For Medium Finish (No. 0)			For Fine Finish (No. 1)			For Fine Finish (No. 2)
	Lg.	For Use On	Wd.		Each	Wd.		Each	Wd.		Each	Wd.		Each
Double Cut







				Rigid

				4"	Steel, Iron	9/32"	4258A17	000000	15/64"	4258A18	000000	—	———	0	15/64"	4258A21	000000


				6"	Steel, Iron	3/8"	4258A24	00000	23/64"	4258A25	00000	23/64"	4258A26	000000	3/8"	4258A27	00000
				8"	Steel, Iron	1/2"	4258A31	00000	33/64"	4258A32	00000	33/64"	4258A33	00000	33/64"	4258A34	00000

Scratch-Free Rectangular Files

Curved rows of teeth on both faces clear chips and create a scratch-free finish. The edges don’t have teeth, protecting adjacent surfaces when filing. Also known as auto-body and milled-tooth files. They do not include a handle.

Straight Rectangle


Rigid	Flexible	Curved Face

Rigid—Rigid files have a tang that fits into a handle. Length does not include the tang.

Flexible—Flexible files bend to access hard-to-reach spots. They don’t have a tang and can be used with a two-hand holder (sold separately).

	Files							Two-Hand Holders
						For Fine Finish
	Lg.	Wd.	Thk.	Edge Tooth Style	For Use On		Each		Each
Curved Flat Face







				Rigid

				8"	13/16"	11/64"	Flat Without Teeth	Steel, Iron	4282A11	000000	———	0


				10"	1"	7/32"	Flat Without Teeth	Steel, Iron	4282A12	00000	———	0
				12"	1 9/64"	17/64"	Flat Without Teeth	Steel, Iron	4282A13	00000	———	0
				14"	1 11/32"	19/64"	Flat Without Teeth	Steel, Iron	4282A14	00000	———	0




						Flexible

						12"	1 1/8"	3/16"	Flat Without Teeth	Steel, Iron	4283A14	00000	4316A18	000000


						14"	1 3/8"	3/16"	Flat Without Teeth	Steel, Iron	4283A16	00000	4316A18	00000

Half-Round Files for Stainless Steel

File concave, convex, and flat surfaces with little to no clogging. These corrosion-resistant files have two sets of diagonal teeth. They do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Tapered Half Round

					For Medium Finish		For Fine Finish
	Lg.	Wd.	Thk.	For Use On		Each		Each
Double Cut Round Face × Double Cut Flat Face







				Rigid

				6"	5/8"	5/32"	Stainless Steel	8248A16	000000	———	0


				8"	3/4"	7/32"	Stainless Steel	———	0	8248A17	000000

Precision Round Files

Made to exacting measurements to ensure smoothness, these files are used for finishing delicate and intricate parts. They’re good for filing holes and concave surfaces and have two sets of diagonal teeth. Also known as rat-tail files. They do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Tapered Round

			For Coarse Finish (No. 00)			For Medium Finish (No. 0)			For Fine Finish (No. 1)			For Fine Finish (No. 2)			For Extra Fine Finish (No. 4)
	Lg.	For Use On	Dia.		Each	Dia.		Each	Dia.		Each	Dia.		Each	Dia.		Each
Double Cut







				Rigid

				4"	Steel, Iron	—	———	0	—	———	0	1/8"	4256A43	000000	5/32"	4256A22	000000	5/32"	4256A24	000000


				6"	Steel, Iron	—	———	0	3/16"	4256A27	000000	15/64"	4256A28	00000	3/16"	4256A29	00000	15/64"	4256A32	00000
				8"	Steel, Iron	5/16"	4256A41	000000	5/16"	4256A35	00000	—	———	0	—	———	0	—	———	0

Half-Round Rasps


Style A	Style B


Rasp Face	Double Cut	Single Cut

Use on concave, convex, and flat surfaces. These rasps have sharp individual teeth that quickly remove large amounts of soft, clog-prone materials.

Style A


Rasp Face	Single Cut

Style A rasps do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Single Cut—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

						For Coarse Finish
	Lg.	Wd.	Thk.	Edge Tooth Style	For Use On		Each
Rasp Round Face × Rasp Flat Face







				Rigid

				8"	3/4"	3/16"	Single Cut	Brass, Bronze, Copper, Plastic, Rubber, Wood, Leather	4239A12	000000


				10"	15/16"	1/4"	Single Cut	Brass, Bronze, Copper, Plastic, Rubber, Wood, Leather	4239A14	00000
				10"	1 1/8"	3/16"	Single Cut	Brass, Bronze, Copper, Plastic, Rubber, Wood, Leather	4239A18	00000
				12"	1 1/8"	5/16"	Single Cut	Brass, Bronze, Copper, Plastic, Rubber, Wood, Leather	4239A16	00000
				12"	1 5/16"	1/4"	Single Cut	Brass, Bronze, Copper, Plastic, Rubber, Wood, Leather	4239A19	00000

Style B


	Rasp Face	Double Cut

Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

						For Coarse Finish
	Lg.	Wd.	Thk.	Edge Tooth Style	For Use On		Each
Rasp × Double Cut Round Face × Rasp × Double Cut Flat Face







				Rigid

				8"	7/8"	3/16"	Without Teeth	Brass, Bronze, Copper, Plastic, Rubber, Wood, Leather	4263A1	000000


				10"	1 1/16"	3/8"	Without Teeth	Brass, Bronze, Copper, Plastic, Rubber, Wood, Leather	4263A3	00000

Needle File Sets

The files in these sets have small tips for precise work in tight spots. They stand up to frequent use. All are Swiss pattern, so they’re made to exacting measurements to give you control over how much material you remove. They produce more consistent finishes than American-pattern files. File length does not include the length of the tang or handle.

6 Piece Sets with Rubber-Coated Plastic Handle


Straight Rectangle	Tapered Rectangle

Half Round	Round

Triangle	Square

Files with rubber-coated plastic handles are cushioned and comfortable to hold. Each handle has a hole so you can hang the file.

Double-Cut Face—Double-cut files have two sets of diagonal teeth. They remove material more quickly than single-cut files, but you’ll need to use heavier pressure.

	Includes	File Shape	Face Tooth Style	Container Type	For Use On		Each
5 1/2" Long



	2	One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.21" Wd. × 0.058" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.21" Wd. × 0.06" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.21" Wd. × 0.075" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.117" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.15" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.11" Wd.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square	Double Cut	Plastic Case	Steel, Iron	4261A13	000000

12 Piece Sets without Handle


Straight Rectangle	Tapered Rectangle	Half Round	Round

Triangle	Square	Knife	Barrette

Crossing	Joint	Marking	Slitting

Files without handles have a tang, so you can choose your own handle.

Double-Cut Face—Double-cut files have two sets of diagonal teeth. They remove material more quickly than single-cut files, but you’ll need to use heavier pressure.

	Includes	File Shape	Face Tooth Style	Container Type	For Use On		Each
4" Long



	0	One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.129" Wd. × 0.028" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.135" Wd. × 0.039" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—4" Lg. × 0.149" Wd. × 0.053" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—4" Lg. × 0.071" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—4" Lg. × 0.108" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—4" Lg. × 0.069" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—4" Lg. × 0.148" Wd. × 0.052" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—4" Lg. × 0.155" Wd. × 0.053" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—4" Lg. × 0.133" Wd. × 0.053" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—4" Lg. × 0.153" Wd. × 0.040" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—4" Lg. × 0.140" Wd. × 0.044" Thick. One Medium-Finish Slitting File with Double-Cut Faces—4" Lg. × 0.182" Wd. × 0.059" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut	Plastic Pouch	Steel, Iron	4261A11	0000000


	2	One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.129" Wd. × 0.028" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.135" Wd. × 0.039" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—4" Lg. × 0.149" Wd. × 0.053" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—4" Lg. × 0.071" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—4" Lg. × 0.108" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—4" Lg. × 0.069" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—4" Lg.×0.148" Wd.×0.052" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—4" Lg. × 0.155" Wd. × 0.053" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—4" Lg. × 0.133" Wd. × 0.053" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—4" Lg. × 0.153" Wd. × 0.040" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—4" Lg. × 0.140" Wd. × 0.044" Thick. One Fine-Finish Slitting File with Double-Cut Faces—4" Lg. × 0.182" Wd. × 0.059" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut	Plastic Pouch	Steel, Iron	4261A12	000000


	5 1/2" Long



			0	One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.202" Wd. × 0.067" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. One Medium-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut	Plastic Pouch	Steel, Iron	4261A16	000000


			2	One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. One Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut	Plastic Pouch	Steel, Iron	4261A17	000000
			4	One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut	Plastic Pouch	Steel, Iron	4261A18	000000


			6 1/4" Long



					0	One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. One Medium-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut	Plastic Pouch	Steel, Iron	4261A22	000000


					2	One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. One Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut	Plastic Pouch	Steel, Iron	4261A23	000000
					4	One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg.×0.213" Wd.×0.059" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut	Plastic Pouch	Steel, Iron	4261A24	000000
					6	One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg.×0.213" Wd.×0.059" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut	Plastic Pouch	Steel, Iron	4261A25	000000

12 Piece Sets with Rubber-Coated Plastic Handle


Straight Rectangle	Tapered Rectangle	Half Round	Round

Triangle	Square	Knife	Barrette

Crossing	Joint	Marking	Slitting

Files with rubber-coated plastic handles are cushioned and comfortable to hold. Each handle has a hole so you can hang the file.

Double-Cut Face—Double-cut files have two sets of diagonal teeth. They remove material more quickly than single-cut files, but you’ll need to use heavier pressure.

Single-Cut Face—Single-cut files are often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

	Includes	File Shape	Face Tooth Style	Container Type	For Use On		Each
5 1/2" Long



	0	One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.23" Wd. × 0.055" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.25" Wd. × 0.054" Thick. One Medium-Finish Tapered Round File with Single Face—5 1/2" Lg. × 0.124" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.12" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.1" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.197" Wd. × 0.078" Thick One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.21" Wd. × 0.087" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.17" Wd. × 0.095" Thick. One Medium-Finish Joint File with Plain Faces and Single-Cut Edges—5 1/2" Lg. × 0.236" Wd. × 0.049" Thick. One Medium-Finish Tapered Marking File with Plain Face and Single-Cut Face—5 1/2" Lg. × 0.193" Wd. × 0.073" Thick. One Medium-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.21" Wd. × 0.09" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.195" Wd. × 0.078" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut, Single Cut	Pouch with Zipper Closure	Steel, Iron	4261A14	0000000


	2	One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.23" Wd. × 0.055" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.25" Wd. × 0.054" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.195" Wd. × 0.078" Thick. One Fine-Finish Tapered Round File with Single Face—5 1/2" Lg. × 0.124" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.12" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.1" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.197" Wd. × 0.078" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.21" Wd. × 0.087" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.17" Wd. × 0.095" Thick. One Fine-Finish Joint File with Plain Faces and Single-Cut Edges—5 1/2" Lg. × 0.236" Wd. × 0.049" Thick. One Fine-Finish Tapered Marking File with Plain Face and Single-Cut Face—5 1/2" Lg. × 0.193" Wd. × 0.073" Thick. One Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.21" Wd. × 0.09" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut, Single Cut	Pouch with Zipper Closure	Steel, Iron	4261A15	000000
	4	One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.23" Wd. × 0.055" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.25" Wd. × 0.054" Thick. One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.195" Wd. × 0.078" Thick. One Extra-Fine-Finish Tapered Round File with Single Face—5 1/2" Lg. × 0.124" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.12" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.1" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.197" Wd. × 0.078" T One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.21" Wd. × 0.087" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.17" Wd. × 0.095" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Single-Cut Edges—5 1/2" Lg. × 0.236" Wd. × 0.049" Thick. One Extra-Fine-Finish Tapered Marking File with Plain Face and Single-Cut Face—5 1/2" Lg. × 0.193" Wd. × 0.073" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.21" Wd. × 0.09" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut, Single Cut	Pouch with Zipper Closure	Steel, Iron	4261A21	000000


	6 1/4" Long



			0	One Medium-Finish Rectangular File with Double-Cut Faces—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.27" Wd. × 0.042" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.197" Wd. × 0.07" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.12" Dia. One Medium-Finish Tapered Triangular File with Single-Cut Faces—6 1/4" Lg. × 0.13" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.098" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.2" Wd. × 0.073" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.19" Wd. × 0.09" Thick. One Medium-Finish Joint File with Plain Faces and Single-Cut Edges—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick. One Medium-Finish Tapered Marking File with Plain Face and Single-Cut Face—6 1/4" Lg. × 0.198" Wd. × 0.073" Thick. One Medium-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut, Single Cut	Pouch with Zipper Closure	Steel, Iron	4261A311	000000


			2	One Fine-Finish Rectangular File with Double-Cut Faces—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.27" Wd. × 0.042" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.197" Wd. × 0.07" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.12" Dia. One Fine-Finish Tapered Triangular File with Single-Cut Faces—6 1/4" Lg. × 0.13" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.098" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.2" Wd. × 0.073" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.19" Wd. × 0.09" Thick. One Fine-Finish Joint File with Plain Faces and Single-Cut Edges—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick. One Fine-Finish Tapered Marking File with Plain Face and Single-Cut Face—6 1/4" Lg. × 0.198" Wd. × 0.073" Thick. One Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut, Single Cut	Pouch with Zipper Closure	Steel, Iron	4261A312	000000
			4	One Extra-Fine-Finish Rectangular File with Double-Cut Faces—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.27" Wd. × 0.042" Thick. One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.197" Wd. × 0.07" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.12" Dia. One Extra-Fine-Finish Tapered Triangular File with Single-Cut Faces—6 1/4" Lg. × 0.13" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.098" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.2" Wd. × 0.073" Thi One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.19" Wd. × 0.09" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Single-Cut Edges—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick. One Extra-Fine-Finish Tapered Marking File with Plain Face and Single-Cut Face—6 1/4" Lg. × 0.198" Wd. × 0.073" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut, Single Cut	Pouch with Zipper Closure	Steel, Iron	4261A313	000000

Precision Half-Round Files

Made to exacting measurements to ensure smoothness, these files are used for finishing delicate and intricate parts. The half-round shape is good for concave, convex, and flat surfaces. The faces have two sets of diagonal teeth. Files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Tapered Half Round

					For Coarse Finish (No. 00)		For Medium Finish (No. 0)		For Fine Finish (No. 1)		For Fine Finish (No. 2)		For Extra Fine Finish (No. 3)		For Extra Fine Finish (No. 4)
	Lg.	Wd.	Thk.	For Use On		Each		Each		Each		Each		Each		Each
Double Cut Round Face × Double Cut Flat Face







				Rigid

				4"	15/32"	9/64"	Steel, Iron	4248A21	000000	4248A22	000000	———	0	4248A23	000000	———	0	4248A25	000000


				6"	19/32"	3/16"	Steel, Iron	4248A26	00000	———	0	4248A28	000000	4248A29	00000	4248A31	000000	4248A32	00000
				8"	13/16"	15/64"	Steel, Iron	———	0	———	0	4248A36	00000	4248A37	00000	———	0	———	0
				8"	53/64"	15/64"	Steel, Iron	4248A34	000000	———	0	———	0	———	0	———	0	———	0

Thin-Face Diamond File Sets

Thinner than standard diamond files, these are good for reaching into small slots and narrow spaces. Diamond is the hardest, longest-lasting abrasive available and strong enough to file hard materials.

5 Pieces

Image of Product. Front orientation. Files. Thin-Face Diamond File Sets.

0.984" Diamond

Surface Lg.

0.591" Diamond

Surface Lg.

Includes	For Use On		Each
One Medium-Finish Rectangular File with 0.591" Sq. Diamond Surface—0.047" Thick. One Medium-Finish Rectangular File with 0.984" Sq. Diamond Surface—0.047" Thick. One Fine-Finish Rectangular File with 0.591" Sq. Diamond Surface—0.039" Thick. One Fine-Finish Rectangular File with 0.984" Sq. Diamond Surface—0.039" Thick. One File Holder with a Plastic Handle	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Glass, Carbide, Carbon Fiber, Graphite	8142A31	0000000

Flexible Rectangular Diamond Files

Flex these files over curves or bend them into slots and grooves. They’re coated with diamond abrasive, which is harder and lasts longer than any other abrasive. Use them to shape and smooth titanium, stone, and other hard materials.

Straight Rectangle

						For Medium Finish (100 to 120 Grit)		For Fine Finish (180 to 220 Grit)		For Extra Fine Finish (320 to 400 Grit)
	Diamond Surface Lg.	Lg.	Wd.	Thk.	For Use On		Each		Each		Each
Flexible



		3.465"	6 3/4"	0.551"	0.067"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Glass, Carbide, Carbon Fiber, Graphite	1055N12	000000	1055N11	000000	1055N22	000000

Diamond Needle File Sets

The hardest files available, these are the longest lasting and strong enough to file hard materials. The small tips allow precise work in tight spots.

6 Piece Set for Coarse Finish


Rectangle	Half Round	Round

Triangle	Square	Crossing

Includes	File Shape	For Use On		Each
One Coarse-Finish Rectangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.201" Wd. × 0.055" Thick. One Coarse-Finish Tapered Half-Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.213" Wd. × 0.075" Thick. One Coarse-Finish Tapered Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.118" Dia. One Coarse-Finish Tapered Triangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.154" Wd. One Coarse-Finish Tapered Square File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.098" Wd. One Coarse-Finish Tapered Crossing File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.185" Wd. × 0.087" Thick.	Straight Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Crossing	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Bricks	4330A13	0000000

6 Piece Set for Medium Finish


Rectangle	Half Round	Round

Triangle	Square	Crossing

Includes	File Shape	For Use On		Each
One Medium-Finish Rectangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.201" Wd. × 0.055" Thick. One Medium-Finish Tapered Half-Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.213" Wd. × 0.075" Thick. One Medium-Finish Tapered Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.118" Dia. One Medium-Finish Tapered Triangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.154" Wd. One Medium-Finish Tapered Square File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.098" Wd. One Medium-Finish Tapered Crossing File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.185" Wd. × 0.087" Thick.	Straight Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Crossing	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Bricks	4330A12	0000000

6 Piece Set for Fine Finish


Rectangle	Half Round	Round

Triangle	Square	Crossing

Includes	File Shape	For Use On		Each
One Fine-Finish Rectangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.201" Wd. × 0.055" Thick. One Fine-Finish Tapered Half-Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.213" Wd. × 0.075" Thick. One Fine-Finish Tapered Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.118" Dia. One Fine-Finish Tapered Triangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.154" Wd. One Fine-Finish Tapered Square File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.098" Wd. One Fine-Finish Tapered Crossing File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.185" Wd. × 0.087" Thick.	Straight Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Crossing	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Bricks	4330A11	0000000

6 Piece Set for Coarse, Medium, and Fine Finish


Rectangle	Round

Includes	File Shape	For Use On		Each
One Coarse-Finish Rectangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.201" Wd. × 0.055" Thick. One Coarse-Finish Tapered Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.118" Dia. One Medium-Finish Rectangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.201" Wd. × 0.055" Thick. One Medium-Finish Tapered Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.118" Dia. One Fine-Finish Rectangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.201" Wd. × 0.055" Thick. One Fine-Finish Tapered Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.118" Dia.	Straight Rectangle Tapered Round	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Bricks	4330A14	0000000

Carbide Needle Files

Second only to diamond in hardness, these files last 100 times longer than standard files. The small tip allows precise work in tight spots.

Straight Rectangle

				For Extra Fine Finish (280 Grit)
Lg.	Wd.	Thk.	For Use On		Each







			Rigid

			5 1/2"	0.236"	0.083"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Bricks	4288A13	000000


			7 1/8"	0.394"	0.108"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Bricks	4288A23	00000

Tapered Round

Round files are good for filing holes and concave surfaces.

		For Extra Fine Finish (280 Grit)
Lg.	For Use On	Dia.		Each







			Rigid

			5 1/2"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Bricks	0.128"	4288A15	000000


			7 1/8"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Bricks	0.217"	4288A25	00000

Tapered Triangle

Triangular files have three filing surfaces to work in spots others can't.

				For Extra Fine Finish (280 Grit)
Lg.	Wd.	Thk.	For Use On		Each







			Rigid

			5 1/2"	0.167"	0.167"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Bricks	4288A14	000000


			7 1/8"	0.276"	0.276"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Bricks	4288A24	00000

Tapered Square

Square files are good for slots, keyways, grooves, and corners.

				For Extra Fine Finish (280 Grit)
Lg.	Wd.	Thk.	For Use On		Each







			Rigid

			5 1/2"	0.128"	0.128"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Bricks	4288A11	000000


			7 1/8"	0.197"	0.197"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Bricks	4288A21	00000

Tapered Knife

Knife files get into tight angles, corners, and slots.

				For Extra Fine Finish (280 Grit)
Lg.	Wd.	Thk.	For Use On		Each







			Rigid

			5 1/2"	0.207"	0.089"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Bricks	4288A12	000000


			7 1/8"	0.354"	0.128"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Bricks	4288A22	00000

Triangular Diamond Files

With three filing surfaces, these files work in spots others can't. Diamond is the hardest, longest-lasting abrasive available and strong enough to file hard materials.

Straight Triangle


Straight Triangle	1.5" Diamond Surface Length

					For Coarse Finish (80 to 100 Grit)		For Medium Finish (120 to 150 Grit)		For Fine Finish (150 to 180 Grit)
	Diamond Surface Lg.	Lg.	Wd.	For Use On		Each		Each		Each
Rigid



		1.5"	6"	1/8"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Glass, Carbide, Carbon Fiber, Graphite	8168A45	000000	8168A64	000000	8168A54	000000

Tapered Triangle


Tapered Triangle	4.328" Diamond Surface Length

					For Coarse Finish (80 to 100 Grit)		For Medium Finish (120 to 150 Grit)		For Fine Finish (150 to 180 Grit)
	Diamond Surface Lg.	Lg.	Wd.	For Use On		Each		Each		Each
Rigid



		4.328"	8 5/8"	0.382"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Glass, Carbide, Carbon Fiber, Graphite	4243A64	000000	4243A62	000000	4243A65	000000

Half-Round Diamond Files

Use these files on concave, convex, and flat surfaces. They have diamond abrasive, which is harder and lasts longer than any other abrasive, so you can file titanium and other hard materials.

Tapered Half Round

Smooth File—Flat smooth faces won’t scratch nearby surfaces when you’re filing.

						For Coarse Finish (80 to 100 Grit)			For Medium Finish (120 to 150 Grit)			For Fine Finish (150 to 180 Grit)
	Diamond Surface Lg.	Face Shape (File Type)	Lg.	Wd.	For Use On	Thk.		Each	Thk.		Each	Thk.		Each
Rigid



		1.772"	Round (Abrasive Grit) × Flat (Abrasive Grit)	3 3/8"	0.201"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Glass, Carbide, Carbon Fiber, Graphite	0.083"	4243A214	000000	0.083"	4243A213	000000	0.083"	4243A212	000000


		1.772"	Round (Abrasive Grit) × Flat (Smooth)	3 3/8"	0.201"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Glass, Carbide, Carbon Fiber, Graphite	—	———	0	0.075"	4243A211	00000	—	———	0
		4.33"	Round (Abrasive Grit) × Flat (Abrasive Grit)	8 1/2"	0.496"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Glass, Carbide, Carbon Fiber, Graphite	0.154"	4243A34	00000	0.154"	4243A32	00000	0.154"	4243A35	00000

Needle Files for Stainless Steel

Remove material from stainless steel with little to no clogging. These files a have small tip that’s ideal for filing in slots, grooves, and other tight spots on intricate parts. And with a Swiss cut pattern, they’ll file with precision—they’re made to more exact measurements than files with an American cut pattern. Since they’re double cut with two sets of diagonal teeth, you can put more pressure on them than single-cut files for quicker filing. All files resist corrosion.

These files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Straight Rectangle

						For Medium Finish (No. 0)		For Fine Finish (No. 2)
	Lg.	Wd.	Thk.	Edge Tooth Style	For Use On		Each		Each
Double Cut







				Rigid

				3 1/2"	15/64"	1/16"	Double Cut	Stainless Steel	9815N111	000000	9815N112	000000

Tapered Half Round

Half-round files can be used on concave, convex, and flat surfaces.

						For Medium Finish (No. 0)		For Fine Finish (No. 2)
	Lg.	Wd.	Thk.	Edge Tooth Style	For Use On		Each		Each
Double Cut Round Face × Double Cut Flat Face







				Rigid

				3 1/2"	15/64"	5/64"	Double Cut × Double Cut	Stainless Steel	9815N113	000000	9815N114	000000

Tapered Round

Round files are good for filing holes and concave surfaces.

				For Medium Finish (No. 0)		For Fine Finish (No. 2)
	Lg.	Dia.	For Use On		Each		Each
Double Cut







				Rigid

				3 1/2"	9/64"	Stainless Steel	9815N115	000000	9815N116	000000

Tapered Triangle

Triangular files have three filing surfaces to work in spots others can't.

					For Medium Finish (No. 0)		For Fine Finish (No. 2)
	Lg.	Wd.	Edge Tooth Style	For Use On		Each		Each
Double Cut







				Rigid

				3 1/2"	5/32"	Double Cut	Stainless Steel	9815N117	000000	9815N118	000000

Integrated-Handle Half-Round Files

No separate handle needed—these files shape concave, convex, and flat surfaces right out of the box. The handle is rubber coated for a comfortable grip. Since they’re double cut with two sets of diagonal teeth, you can put more pressure on them than single-cut files for quicker filing. Length does not include the handle.

Straight Half Round

Black Oxide—Files with a black-oxide finish resist rust and clogging.

							For Coarse Finish		For Medium Finish		For Fine Finish
	Lg.	Wd.	Thk.	Finish	Handle Material	For Use On		Each		Each		Each
Double Cut Round Face × Double Cut Flat Face







				Rigid

				8"	13/16"	1/4"	—	Rubber-Coated Plastic	Steel, Iron	9710N104	000000	———	0	———	0


				8"	13/16"	1/4"	Black Oxide	Rubber-Coated Plastic	Steel, Iron	9710N101	00000	———	0	———	0
				10"	15/16"	1/4"	—	Rubber-Coated Plastic	Steel, Iron	9710N105	00000	9710N106	000000	9710N107	000000
				10"	15/16"	1/4"	Black Oxide	Rubber-Coated Plastic	Steel, Iron	9710N102	00000	———	0	9710N103	00000

Half-Round Files for Aluminum and Soft Metal

Use on concave, convex, and flat surfaces. These files have two sets of diagonal teeth that are specially designed to resist clogging on soft metals. They do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Tapered Half Round

					For Fine Finish
	Lg.	Wd.	Thk.	For Use On		Each
Double Cut Round Face × Double Cut Flat Face







				Rigid

				8"	3/4"	3/16"	Aluminum, Brass, Bronze, Copper	4218A16	000000


				10"	15/16"	1/4"	Aluminum, Brass, Bronze, Copper	4218A17	00000
				12"	1 1/8"	5/16"	Aluminum, Brass, Bronze, Copper	4218A18	00000

Square Diamond Files

File slots, keyways, grooves, and corners. Diamond is the hardest, longest-lasting abrasive available and strong enough to file hard materials.

Straight Square


Straight Square	1.5" Diamond Surface Length

					For Coarse Finish (80 to 100 Grit)		For Medium Finish (120 to 150 Grit)		For Fine Finish (150 to 180 Grit)
	Diamond Surface Lg.	Lg.	Wd.	For Use On		Each		Each		Each
Rigid



		1.5"	6"	1/8"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Glass, Carbide, Carbon Fiber, Graphite	8168A65	000000	8168A49	000000	8168A41	000000

Tapered Square


Tapered Square	4.328" Diamond Surface Length

					For Coarse Finish (80 to 100 Grit)		For Medium Finish (120 to 150 Grit)		For Fine Finish (150 to 180 Grit)
	Diamond Surface Lg.	Lg.	Wd.	For Use On		Each		Each		Each
Rigid



		4.328"	8 5/8"	0.24"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Glass, Carbide, Carbon Fiber, Graphite	4243A54	000000	4243A52	000000	4243A55	000000

Chain Saw Files

Slide these files between teeth on a chain saw to sharpen their cutting edges. They have a tang that fits into a handle. Length does not include the tang.

Straight Round


	Straight Round	Chain Saw

Round files, also known as blunt round files, are used to sharpen the teeth on full-chisel or semi-chisel chains. They have a knurled surface that’s designed for rapid material removal with heavy pressure.

		For Chain Saw Chain				For Fine Finish
	Lg.	Pitch	Pitch Profile	Cutter Type	For Use On	Dia.		Each
Knurled







				Rigid

				6"	1/4"	Low	Full Chisel, Semi Chisel	Steel	1/8"	4246A8	00000


				6"	1/4" 3/8"	Standard Low	Full Chisel, Semi Chisel	Steel	5/32"	4246A9	0000
				8"	1/4"	Low	Full Chisel, Semi Chisel	Steel	1/8"	4246A112	0000
				8"	1/4"	Standard	Full Chisel, Semi Chisel	Steel	5/32"	4246A114	0000
				8"	0.325"	Standard	Full Chisel, Semi Chisel	Steel	3/16"	4246A1	0000
				8"	3/8"	Standard	Full Chisel, Semi Chisel	Steel	13/64"	4246A113	0000
				8"	0.404"	Standard	Full Chisel, Semi Chisel	Steel	7/32"	4246A2	0000
				8"	7/16" 1/2"	Standard	Full Chisel, Semi Chisel	Steel	1/4"	4246A3	0000
				8"	3/4"	Standard	Full Chisel, Semi Chisel	Steel	5/16"	4246A4	0000
				8"	—	—	Full Chisel, Semi Chisel	Steel	3/8"	4246A6	0000

Straight Joint


	Straight Joint	Chain Saw

Joint files, also known as depth gauge files, are used to modify the cut depth once the teeth are sharpened. These single-cut files have one set of diagonal teeth that slowly removes material with light pressure.

							For Fine Finish
	Lg.	Wd.	Thk.	Edge Tooth Style	For Use On	For Use With		Each
Single Cut







				Rigid

				6"	5/8"	3/32"	Without Teeth	Steel	Depth Gauges	4246A111	00000

Files for Plastic, Laminate, and Fiberglass

Extra-sharp teeth cut quickly. These files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Tapered Rectangle

Single-Cut Face—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material.

Single-Cut Face with Chip Breaker—Speed up reaching a fine finish. They have single-cut teeth divided by diagonal cutting edges that act as chip breakers—the chip breakers rough the surface while the single-cut teeth smooth it.

						For Fine Finish
	Lg.	Wd.	Thk.	Edge Tooth Style	For Use On		Each
Single Cut Flat Face







				Rigid

				8"	3/4"	1/8"	Flat Single Cut	Plastic, Laminate, Fiberglass	8189A11	000000


				10"	15/16"	3/16"	Flat Single Cut	Plastic, Laminate, Fiberglass	8189A12	00000
				12"	1 1/8"	3/16"	Flat Single Cut	Plastic, Laminate, Fiberglass	8189A13	00000
				14"	1 5/16"	1/4"	Flat Single Cut	Plastic, Laminate, Fiberglass	8189A14	00000


				Single Cut Flat Face with Chip Breaker







								Rigid

								10"	15/16"	3/16"	Flat Single Cut	Plastic, Laminate, Fiberglass	8189A15	00000


								12"	1 1/8"	3/16"	Flat Single Cut	Plastic, Laminate, Fiberglass	8189A16	00000
								14"	1 5/16"	1/4"	Flat Single Cut	Plastic, Laminate, Fiberglass	8189A17	00000

Bend-and-Stay Needle Files

Bend these files to conform to your workpiece and they will hold the shape until you bend them again. They can be bent more than 100 times without breaking. The small tip allows precise work in tight spots. Files have one set of diagonal teeth. They do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Tapered Rectangle

					For Fine Finish (No. 2)
	Lg.	Wd.	Thk.	For Use On		Each
Single Cut







				Bend and Stay

				6 1/4"	7/32"	1/16"	Steel, Iron	8178A21	000000

Tapered Half Round

Tapered Half

Round

Half-round files can be used on concave, convex, and flat surfaces.

					For Fine Finish (No. 2)
	Lg.	Wd.	Thk.	For Use On		Each
Single Cut







				Bend and Stay

				6 1/4"	3/32"	5/64"	Steel, Iron	8178A23	000000

Tapered Round

Round files are good for filing holes and concave surfaces.

			For Fine Finish (No. 2)
	Lg.	For Use On	Dia.		Each
Single Cut







				Bend and Stay

				6 1/4"	Steel, Iron	1/8"	8178A22	000000

Tapered Triangle

Triangular files have three filing surfaces to work in spots others can't.

				For Fine Finish (No. 2)
	Lg.	Wd.	For Use On		Each
Single Cut







				Bend and Stay

				6 1/4"	1/8"	Steel, Iron	8178A25	000000

Tapered Square

Square files are good for slots, keyways, grooves, and corners.

				For Fine Finish (No. 2)
	Lg.	Wd.	For Use On		Each
Single Cut







				Bend and Stay

				6 1/4"	7/64"	Steel, Iron	8178A24	000000

Tapered Barrette

					For Fine Finish (No. 2)
	Lg.	Wd.	Thk.	For Use On		Each
Single Cut







				Bend and Stay

				6 1/4"	3/32"	1/16"	Steel, Iron	8178A26	000000

Integrated-Handle Round Files

Smooth out concave shapes and holes without needing a separate handle. They remove material rapidly because they have two sets of diagonal teeth and are used with more pressure than single-cut files. A rubber-coated plastic handle gives you a good, comfortable grip. Length does not include the handle.

Tapered Round

Black Oxide—Files with a black-oxide finish resist rust and clogging.

					For Coarse Finish			For Medium Finish			For Fine Finish
	Lg.	Finish	Handle Material	For Use On	Dia.		Each	Dia.		Each	Dia.		Each
Double Cut







				Rigid

				8"	—	Rubber-Coated Plastic	Steel, Iron	9/32"	9711N113	000000	—	———	0	—	———	0


				8"	Black Oxide	Rubber-Coated Plastic	Steel, Iron	9/32"	9711N111	00000	—	———	0	—	———	0
				10"	—	Rubber-Coated Plastic	Steel, Iron	11/32"	9711N114	00000	11/32"	9711N115	000000	11/32"	9711N116	000000
				10"	Black Oxide	Rubber-Coated Plastic	Steel, Iron	11/32"	9711N112	00000	—	———	0	—	———	0

Precision Rectangular Files for Stainless Steel

Made to exacting measurements to ensure smoothness, these corrosion-resistant files are used for finishing delicate and intricate parts with little to no clogging. They do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Straight Rectangle

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

Single-Cut Edge—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

Without Teeth—Edges without teeth protect adjacent surfaces when filing.

						For Coarse Finish (No. 00)		For Medium Finish (No. 0)		For Fine Finish (No. 2)
	Lg.	Wd.	Thk.	Edge Tooth Style	For Use On		Each		Each		Each
Double Cut Flat Face







				Rigid

				6"	3/4"	5/32"	Flat Single Cut × Flat Without Teeth	Stainless Steel	8184A11	000000	8184A12	000000	———	0


				8"	55/64"	3/16"	Flat Single Cut × Flat Without Teeth	Stainless Steel	8184A31	00000	8184A32	00000	8184A33	000000

Rectangular Carbide Files

Second only to diamond in hardness, these files last 100 times longer than standard files.

Straight Rectangle

				For Coarse Finish (60 Grit)		For Coarse/Medium Finish (80 Grit)
Lg.	Wd.	Thk.	For Use On		Each		Each







			Rigid

			8"	1/4"	1/8"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Bricks	81725A11	000000	81725A311	000000


			8"	1/2"	1/8"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Bricks	81725A12	00000	81725A312	00000
			10"	1/2"	1/8"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Bricks	81725A13	00000	81725A313	00000
			10"	3/4"	1/8"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Bricks	81725A14	00000	———	0
			10"	1"	1/8"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Bricks	81725A15	00000	81725A314	00000
			12"	1/2"	1/8"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Bricks	81725A16	00000	———	0

Electrically Insulating Rectangular Files

An insulated handle protects against shock from accidental contact with live electrical circuits. These files meet IEC 60900 and ASTM F1505 standards, so they’re certified to protect you from a maximum of 1,000 volts of electricity. Tested up to 10 times their certified level, they have a significant safety margin. They also meet several workplace safety standards including OSHA, NFPA, and CSA. A guard on the front of the handle keeps your hand from slipping forward into the work area. The plastic handle helps you get a good, comfortable grip on these files.

The faces of these files have two sets of diagonal teeth for rapid material removal; the edges have one set of diagonal teeth for slow material removal and sharpening tool-cutting surfaces.

Tapered Rectangle

									For Fine Finish
	Lg.	Wd.	Thk.	Edge Tooth Style	Material	Handle Material	For Use On	Specs. Met		Each
Double Cut Flat Face







				Rigid

				8"	5/8"	1/8"	Flat Single Cut	Steel	Plastic	Steel, Iron	ASTM F1505, IEC 60900	3180N11	000000

Precision Half-Round Files for Stainless Steel

Made to exacting measurements to ensure smoothness, these corrosion-resistant files are used for finishing delicate and intricate parts with little to no clogging. They’re good for concave, convex, and flat surfaces and have two sets of diagonal teeth. Files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Tapered Half Round

					For Medium Finish (No. 0)		For Fine Finish (No. 2)
	Lg.	Wd.	Thk.	For Use On		Each		Each
Double Cut Round Face × Double Cut Flat Face







				Rigid

				6"	39/64"	5/32"	Stainless Steel	8184A13	000000	———	0


				8"	55/64"	7/32"	Stainless Steel	———	0	8184A14	000000

Files for Painted Surfaces

Shave bumps and dried paint drips off the wall without scuffing the surrounding area. These files are also known as denibbing files since paint imperfections are commonly called nibs. Use light pressure to slowly remove material with their diagonal teeth. These files are reversible: one side takes care of large drips, while the other creates a fine finish. The file sits inside of a rubber-coated steel handle and is magnetic, so you can easily flip between sides. The hold is strong enough that it won’t pop out while you’re filing.

Straight Rectangle

Image of Product. Bottom orientation. Files. Files for Painted Surfaces.

							For Coarse Finish × Fine Finish
	Lg.	Wd.	Thk.	Handle Material	File Mounting Style	For Use On		Each
Single Cut Flat Face × Double Cut Flat Face







				Rigid

				1 5/8"	3/4"	1 1/8"	Rubber-Coated Steel	Magnetic	Painted Surfaces, Wood	9714N11	000000

Point Diamond Files

Get inside small holes and crevices. Diamond is the hardest, longest-lasting abrasive available and strong enough to file hard materials.

Tapered Point

					For Coarse Finish (80 to 100 Grit)		For Medium Finish (100 to 120 Grit)		For Fine Finish (150 to 180 Grit)
	Diamond Surface Lg.	Lg.	Wd.	For Use On		Each		Each		Each
Rigid



		0.5"	6"	1/8"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Glass, Carbide, Carbon Fiber, Graphite	8168A66	000000	8168A55	000000	8168A46	000000


		0.875"	6"	1/4"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Glass, Carbide, Carbon Fiber, Graphite	8168A67	00000	8168A56	00000	8168A48	00000

Files for Air-Powered Filers

Straight Rectangle

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

						For Medium Finish
	Shank Dia.	Lg.	Wd.	Thk.	Edge Tooth Style	Pkg. Qty.		Pkg.
Double Cut Flat Face







				Rigid

				3/16"	4 1/8"	5/16"	1/8"	Flat Double Cut	1	4231A34	000000


				3/16"	4 1/8"	5/16"	1/8"	Flat Double Cut	5	4231A41	00000
				1/4"	4 1/2"	3/8"	1/8"	Flat Double Cut	1	42185A51	00000
				1/4"	4 1/2"	3/8"	1/8"	Flat Double Cut	3	42185A31	00000

Tapered Half Round

Tapered Half

Round

Half-round files can be used on concave, convex, and flat surfaces.

Single-Cut Face—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

					For Medium Finish
	Shank Dia.	Lg.	Wd.	Thk.	Pkg. Qty.		Pkg.
Single Cut Round Face × Double Cut Flat Face







				Rigid

				3/16"	4 1/8"	5/16"	1/8"	1	4231A33	000000


				3/16"	4 1/8"	5/16"	1/8"	5	4231A42	00000
				1/4"	4 1/2"	3/8"	1/8"	1	42185A54	00000
				1/4"	4 1/2"	3/8"	1/8"	3	42185A32	00000

Tapered Round

Round files are good for filing holes and concave surfaces.

Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

Single Cut—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

			For Medium Finish				For Fine Finish
	Shank Dia.	Lg.	Dia.	Pkg. Qty.		Pkg.	Dia.	Pkg. Qty.		Pkg.
Double Cut







				Rigid

				3/16"	4 1/8"	7/32"	1	4231A31	000000	—	—	———	0


				3/16"	4 1/8"	7/32"	5	4231A43	00000	—	—	———	0


				Single Cut







								Rigid

								1/4"	4 1/2"	—	—	———	0	1/4"	1	42185A52	000000


								1/4"	4 1/2"	—	—	———	0	1/4"	3	42185A33	00000

Tapered Triangle

Triangular files have three filing surfaces to work in spots others can't.

Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

				For Medium Finish
	Shank Dia.	Lg.	Wd.	Pkg. Qty.		Pkg.
Double Cut







				Rigid

				3/16"	4 1/8"	1/4"	1	4231A32	000000


				3/16"	4 1/8"	1/4"	5	4231A44	00000
				1/4"	4 1/2"	1/4"	1	42185A53	00000
				1/4"	4 1/2"	1/4"	3	42185A34	00000

Integrated-Handle Rectangular Carbide Files

The plastic handle provides a comfortable grip. Second only to diamond in hardness, they last 100 times longer than standard files.

Straight Rectangle

					For Extra-Coarse/Coarse Finish (24 Grit × 24 Grit)		For Coarse/Medium Finish (46 Grit × 80 Grit)
Lg.	Wd.	Thk.	Handle Material	For Use On		Each		Each







			Rigid

			14"	1"	1/8"	Plastic	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Bricks	———	0	4337A11	000000


			14"	1"	3/16"	Plastic	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Bricks	4337A12	000000	———	0

Rectangular Rasps


Style A	Style B


Rasp Face	Double-Cut Face	Single-Cut Face with Chip Breaker	Single-Cut Edge

Sharp individual rasp teeth quickly remove large amounts of soft, clog-prone materials better than regular files.

Style A


	Rasp Face	Double-Cut Face	Single-Cut Edge

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

Single-Cut Edge—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

						For Coarse Finish
	Lg.	Wd.	Thk.	Edge Tooth Style	For Use On		Each
Rasp Flat Face × Double Cut Flat Face







				Rigid

				14"	1 1/2"	1/4"	Flat Single Cut	Brass, Bronze, Copper, Plastic, Rubber, Wood, Leather	4277A14	000000

Style B


Rasp Face	Double-Cut Face

Single-Cut Face with Chip Breaker	Single-Cut Edge

Style B rasps do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

Single-Cut Edge—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

						For Coarse Finish
	Lg.	Wd.	Thk.	Edge Tooth Style	For Use On		Each
Rasp Flat Face × Double Cut Flat Face







				Rigid

				14"	1 3/4"	5/16"	Flat Single Cut	Brass, Bronze, Copper, Plastic, Rubber, Wood, Leather	42355A11	000000


				Rasp Flat Face × Single Cut Flat Face with Chip Breaker







								Rigid

								14"	1 11/16"	3/16"	Flat Single Cut	Brass, Bronze, Copper, Plastic, Rubber, Wood, Leather	42355A12	00000

Round Files for Stainless Steel

Good for filing holes and concave surfaces with little to no clogging. These files are corrosion resistant and have two sets of diagonal teeth. Also known as rat-tail files. They do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Tapered Round

				For Medium Finish		For Fine Finish
	Lg.	Dia.	For Use On		Each		Each
Double Cut







				Rigid

				8"	5/16"	Stainless Steel	8248A18	000000	8248A19	000000

Bend-and-Stay Needle File Sets

Bend these files to conform to your workpiece and they will hold the shape until you bend them again. They can be bent more than 100 times without breaking. The small tip allows precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

6 Piece Set


Rectangle	Half Round	Round

Triangle	Square	Barrette

File Cut No.	Includes	File Shape	For Use On		Each
2	One Fine-Finish Tapered Rectangular File with Single-Cut Faces—6 1/4" Lg. × 7/32" Wd. × 1/16" Thick. One Fine-Finish Tapered Half-Round File with Single-Cut Faces—6 1/4" Lg. × 3/32" Wd. × 5/64" Thick. One Fine-Finish Tapered Round File with Single-Cut Face—6 1/4" Lg. × 1/8" Dia. One Fine-Finish Tapered Triangular File with Single-Cut Faces—6 1/4" Lg. × 1/8" Wd. One Fine-Finish Tapered Square File with Single-Cut Faces—6 1/4" Lg. × 7/64" Wd. One Fine-Finish Tapered Barrette File with Single-Cut Faces—6 1/4" Lg. × 3/32" Wd. × 1/16" Thick.	Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Barrette	Steel, Iron	8178A31	0000000

Needle File Sets for Stainless Steel

Keep different shapes of needle files on hand to remove material from stainless steel. The files in these sets almost never clog. Their small tip is ideal for work in slots, grooves, and other tight spots on intricate parts. With a Swiss cut pattern, they’ll leave a consistent finish—they’re made to more exact measurements than files with an American cut pattern. Since they’re double cut with two sets of diagonal teeth, you can put more pressure on them than single-cut files for quicker filing. All files resist corrosion.

The files in these sets do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

6 Pieces—3 1/2" Long


Rectangle	Half Round	Round

Triangle	Square	Barrette

File Cut No.	Includes	File Shape		Each
0	One Medium-Finish Rectangular File with Double-Cut Faces and Double-Cut Edges—3 1/2" Lg. × 15/64" Wd. × 1/16" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—3 1/2" Lg. × 15/64" Wd. × 5/64" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—3 1/2" Lg. × 9/64" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—3 1/2" Lg. × 5/32" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—3 1/2" Lg. × 7/64" Wd. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—3 1/2" Lg. × 7/32" Wd. × 3/32" Thick.	Straight Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Barrette	8071N101	000000
2	One Fine-Finish Rectangular File with Double-Cut Faces and Double-Cut Edges—3 1/2" Lg. × 15/64" Wd. × 1/16" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—3 1/2" Lg. × 15/64" Wd. × 5/64" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—3 1/2" Lg. × 9/64" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—3 1/2" Lg. × 5/32" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—3 1/2" Lg. × 7/64" Wd. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—3 1/2" Lg. × 7/32" Wd. × 3/32" Thick.	Straight Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Barrette	8071N102	00000

Round Carbide Files

Good for filing holes and concave surfaces. Second only to diamond in hardness, these files last 100 times longer than standard files.

Tapered Round

		For Coarse Finish (60 Grit)
Lg.	For Use On	Dia.		Each







			Rigid

			8"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Bricks	1/16"	81725A17	000000


			8"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Bricks	1/8"	81725A18	00000

Round Rasps

Good for filing holes and concave surfaces, these rasps have sharp individual teeth that quickly remove large amounts of soft, clog-prone materials. They do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Tapered Round

Image of Specification. Front orientation. Contains Border. Round. Round Rasps, Tapered File.

Tapered Round

			For Coarse Finish
	Lg.	For Use On	Dia.		Each
Rasp Round Face







				Rigid

				10"	Plastic, Rubber, Wood, Leather	3/8"	4285A41	000000

Square Files for Stainless Steel

File slots, keyways, grooves, and corners with little to no clogging. These corrosion-resistant files have two sets of diagonal teeth. They do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Tapered Square

				For Medium Finish		For Fine Finish
	Lg.	Wd.	For Use On		Each		Each
Double Cut







				Rigid

				6"	7/32"	Stainless Steel	8248A23	000000	8248A24	000000

Precision Triangular Files for Stainless Steel

Made to exacting measurements to ensure smoothness, these corrosion-resistant files are used for finishing delicate and intricate parts with little to no clogging. They have three filing surfaces with two sets of diagonal teeth to work in spots others can't. Files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Tapered Triangle

				For Medium Finish (No. 0)		For Fine Finish (No. 2)
	Lg.	Wd.	For Use On		Each		Each
Double Cut







				Rigid

				8"	9/16"	Stainless Steel	8184A17	000000	8184A18	000000

Thin-Face Rectangular Diamond Files

Straight Rectangle


0.591" Diamond Surface Length	0.984" Diamond Surface Length	File Holders

File Holders—A file holder (sold separately) is required.

	Files										File Holders
					For Medium Finish (120 to 150 Grit)			For Fine Finish (150 to 180 Grit)
	Diamond Surface Lg.	Overall Lg. with Holder	Wd.	For Use On	Thk.		Each	Thk.		Each	Lg.	Handle Material		Each
Rigid



		0.591"	6 3/8"	0.591"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Glass, Carbide, Carbon Fiber, Graphite	0.047"	8142A12	000000	0.039"	8142A11	000000	5 13/16"	Plastic	8142A21	000000


		0.984"	6 3/4"	0.984"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Glass, Carbide, Carbon Fiber, Graphite	0.047"	8142A14	00000	0.039"	8142A13	00000	5 13/16"	Plastic	8142A21	00000

Triangular Files for Stainless Steel

With three filing surfaces, these corrosion-resistant files work in spots others can't with little to no clogging. They have two sets of diagonal teeth. Files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Tapered Triangle

				For Medium Finish		For Fine Finish
	Lg.	Wd.	For Use On		Each		Each
Double Cut







				Rigid

				8"	9/16"	Stainless Steel	8248A21	000000	8248A22	000000

Precision Round Files for Stainless Steel

Made to exacting measurements to ensure smoothness, these corrosion-resistant files are used for finishing delicate and intricate parts with little to no clogging. They’re good for filing holes and concave surfaces and have two sets of diagonal teeth. Files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Tapered Round

				For Medium Finish (No. 0)		For Fine Finish (No. 2)
	Lg.	Dia.	For Use On		Each		Each
Double Cut







				Rigid

				8"	5/16"	Stainless Steel	8184A15	000000	8184A16	000000
				Precision File for Stainless Steel, Round, for Medium Finish(Number 0) Product Detail QuantityEachIn stock Select a compatible file type: Parasolid

Diamond Files for Ultrasonic Polishers

Shape and trim the slots and grooves on your workpiece—these files remove more material than polishing stones can. Their small size and the rapid vibrations of your ultrasonic polisher give you precise control over where and how much material you remove. With a diamond abrasive, these are our toughest files. They last through heavy use, even on hard materials. Install them with their holder (sold separately) into the handpiece of an ultrasonic polisher.

Straight Rectangle

Image of Specification. Front orientation. Rectangle. Diamond Files for Ultrasonic Polishers, Straight File.

Straight Rectangle

								For Fine Finish (180 Grit)		For Extra Fine/Super Fine Finish (400 Grit)		For Extra Fine/Ultra Fine Finish (600 Grit)
	Diamond Surface Lg.	Face Shape (File Type)	Edge Shape (Edge Texture)	Lg.	Wd.	Thk.	For Use On		Each		Each		Each
Rigid



		19/32"	Flat (Abrasive Grit) × Flat (Abrasive Grit)	Flat (Abrasive) × Flat (Abrasive)	2 1/4"	1/8"	1/64"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Glass, Carbide, Carbon Fiber, Graphite	9625N87	000000	9625N92	000000	9625N96	000000


		19/32"	Flat (Abrasive Grit) × Flat (Abrasive Grit)	Flat (Abrasive) × Flat (Abrasive)	2 1/4"	1/4"	1/64"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Glass, Carbide, Carbon Fiber, Graphite	9625N88	00000	9625N93	00000	9625N97	00000
		19/32"	Flat (Abrasive Grit) × Flat (Abrasive Grit)	Flat (Abrasive) × Flat (Abrasive)	2 7/8"	1/8"	1/64"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Glass, Carbide, Carbon Fiber, Graphite	9625N89	00000	9625N94	00000	9625N98	00000
		19/32"	Flat (Abrasive Grit) × Flat (Abrasive Grit)	Flat (Abrasive) × Flat (Abrasive)	2 7/8"	1/4"	1/64"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Glass, Carbide, Carbon Fiber, Graphite	9625N91	00000	9625N95	00000	9625N99	00000

Ultrasonic Stone Holders

Half-Round Carbide Files

Use on concave, convex, and flat surfaces. Second only to diamond in hardness, these files last 100 times longer than standard files.

Tapered Half Round

				For Coarse Finish (60 Grit)
Lg.	Wd.	Thk.	For Use On		Each







			Rigid

			6"	5/8"	3/16"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Bricks	81725A19	000000


			8"	3/4"	1/4"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Bricks	81725A21	00000

Diamond File Sets for Ultrasonic Polishers

Keep diamond files of different grits and sizes on hand to gradually shape the slots and grooves on your workpiece. Their small size coupled with the rapid vibrations of your ultrasonic polisher give you precise control over where and how much material you remove. Compared to polishing stones, they'll remove more material. The diamond abrasive makes these some of our toughest files. They last through heavy use, even on hard materials. Install them with their holder (sold separately) into the handpiece of an ultrasonic polisher.

12 Pieces

Includes	For Use On		Each
One each 180, 400, 600-grit Rectangular Files for Fine to Extra Fine Finish with 19/32" Lg. Diamond Surface—2 1/4" Lg. × 1/8" Wd. × 1/64" Thick. One each 180, 400, 600-grit Rectangular Files for Fine to Extra Fine Finish with 19/32" Lg. Diamond Surface—2 1/4" Lg. × 1/4" Wd. × 1/64" Thick. One each 180, 400, 600-grit Rectangular Files for Fine to Extra Fine Finish with 19/32" Lg. Diamond Surface—2 7/8" Lg. × 1/8" Wd. × 1/64" Thick. One each 180, 400, 600-grit Rectangular Files for Fine to Extra Fine Finish with 19/32" Lg. Diamond Surface—2 7/8" Lg. × 1/4" Wd. × 1/64" Thick.	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Glass, Carbide, Carbon Fiber, Graphite	9667N11	0000000

Ultrasonic Stone Holders

Carbide Needle File Sets

Second only to diamond in hardness, these files last 100 times longer than standard files. The small tips allow precise work in tight spots.

6 Pieces—5 1/2" Long


Rectangle	Round	Triangle	Square	Knife

Includes	File Shape	For Use On		Each
One Extra-Fine-Finish (280 Grit) Rectangular File—5 1/2" Lg. × 0.236" Wd. × 0.083" Thick. One Extra-Fine-Finish (280 Grit) Tapered Round File—5 1/2" Lg. × 0.128" Dia. One Extra-Fine-Finish (280 Grit) Tapered Triangular File—5 1/2" Lg. × 0.167" Wd. One Extra-Fine-Finish (280 Grit) Tapered Square File—5 1/2" Lg. × 0.128" Wd. One Extra-Fine-Finish (280 Grit) Tapered Knife File—5 1/2" Lg. × 0.207" Wd. × 0.089" Thick. One Plastic Handle	Straight Rectangle Tapered Round Tapered Triangle Tapered Square Tapered Knife	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Bricks	4288A16	000000

6 Pieces—7 1/8" Long


Rectangle	Round	Triangle	Square	Knife

Includes	File Shape	For Use On		Each
One Extra-Fine-Finish (280 Grit) Rectangular File—7 1/8" Lg. × 0.394" Wd. × 0.108" Thick. One Extra-Fine-Finish (280 Grit) Tapered Round File—7 1/8" Lg. × 0.217" Dia. One Extra-Fine-Finish (280 Grit) Tapered Triangular File—7 1/8" Lg. × 0.276" Wd. One Extra-Fine-Finish (280 Grit) Tapered Square File—7 1/8" Lg. × 0.197" Wd. One Extra-Fine-Finish (280 Grit) Tapered Knife File—7 1/8" Lg. × 0.354" Wd. × 0.128" Thick. One Plastic Handle	Straight Rectangle Tapered Round Tapered Triangle Tapered Square Tapered Knife	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Bricks	4288A26	000000

Detail File Sets

Reach into the smallest holes, grooves, and slots to perform detailed work. These tools have a file at each end and a smooth portion in the middle for a comfortable grip. Also known as riffler files.

12 Pieces


1	4	5	6

7	8	9	11

12	15	16	18

		Trade Number
File Cut No.	Includes	Nicholson	Simonds	Grobet	For Use On		Each
0	One Medium-Finish File (Trade No. 1/DSR-1/541)—6" Lg. × 0.128" Dia. One Medium-Finish File (Trade No. 4/DSR-4/529)— 6" Lg. × 0.172" Wd. One Medium-Finish File (Trade No. 5/DSR-5/525)—6" Lg. × 0.22" Wd. One Medium-Finish File (Trade No. 6/DSR-6/526)—6" Lg. × 0.051" Wd. One Medium-Finish File (Trade No. 7/DSR-7/533)—6" Lg. × 0.2" Wd. One Medium-Finish File (Trade No. 8/DSR-8/532)—6" Lg. × 0.18" Wd. One Medium-Finish File (Trade No. 9/DSR-9/542)—6" Lg. × 0.128" Dia. One Medium-Finish File (Trade No. 11/DSR-11/531)—6" Lg. × 0.19" Wd. One Medium-Finish File (Trade No. 12/DSR-12/527)—6" Lg. × 0.184" Wd. One Medium-Finish File (Trade No. 15/DSR-15/537)—6" Lg. × 0.161" Wd. One Medium-Finish File (Trade No. 16/DSR-16/539)—6" Lg. × 0.169" Wd. One Medium-Finish File (Trade No. 18/DSR-18/536)—6" Lg. × 0.159" Wd.	1 4 5 6 7 8 9 11 12 15 16 18	DSR-1 DSR-4 DSR-5 DSR-6 DSR-7 DSR-8 DSR-9 DSR-11 DSR-12 DSR-15 DSR-16 DSR-18	541 529 525 526 533 532 542 531 527 537 539 536	Steel, Iron	4278A1	0000000
2	One Fine-Finish File (Trade No. 1/DSR-1/541)—6" Lg. × 0.128" Dia. One Fine-Finish File (Trade No. 4/DSR-4/529)— 6" Lg. × 0.172" Wd. One Fine-Finish File (Trade No. 5/DSR-5/525)—6" Lg. × 0.22" Wd. One Fine-Finish File (Trade No. 6/DSR-6/526)—6" Lg. × 0.051" Wd. One Fine-Finish File (Trade No. 7/DSR-7/533)—6" Lg. × 0.2" Wd. One Fine-Finish File (Trade No. 8/DSR-8/532)—6" Lg. × 0.18" Wd. One Fine-Finish File (Trade No. 9/DSR-9/542)—6" Lg. × 0.128" Dia. One Fine-Finish File (Trade No. 11/DSR-11/531)—6" Lg. × 0.19" Wd. One Fine-Finish File (Trade No. 12/DSR-12/527)—6" Lg. × 0.184" Wd. One Fine-Finish File (Trade No. 15/DSR-15/537)—6" Lg. × 0.161" Wd. One Fine-Finish File (Trade No. 16/DSR-16/539)—6" Lg. × 0.169" Wd. One Fine-Finish File (Trade No. 18/DSR-18/536)—6" Lg. × 0.159" Wd.	1 4 5 6 7 8 9 11 12 15 16 18	DSR-1 DSR-4 DSR-5 DSR-6 DSR-7 DSR-8 DSR-9 DSR-11 DSR-12 DSR-15 DSR-16 DSR-18	541 529 525 526 533 532 542 531 527 537 539 536	Steel, Iron	4278A2	000000

Chain Saw File Sets

With files, handles, and file guides, these sets come with everything you need to repair full- and semi-chisel chain saw teeth. First, sharpen the teeth with the round files—also called blunt round files. To achieve a consistent tooth height, use the round file guide to align the file with your chain. Then, use the joint file, also known as a depth gauge file, to adjust the cut depth. The joint file guide helps you set a consistent cut depth across the teeth. For hardwood, set the depth to 0.025"; for softwood, use 0.030".

8 Pieces


Joint	Round

For Chain Saw Chain
Pitch	Pitch Profile	Cutter Type	Includes	File Shape	Container Type	For Use On	For Use With		Each
0.325"	Standard	Full Chisel, Semi Chisel	Three Fine-Finish Straight Round Files with Knurled Face — 8" Lg. × 3/16" Dia. One Fine-Finish Straight Joint File with Double-Cut Faces and Smooth Edges — 8" Lg. × 15/32" Wd. × 1/8" Thick. One Plastic Handle for Round Files One Round File Guide One Joint File Guide One Plastic Handle for Joint Files	Straight Joint Straight Round	Roll-Up Pouch	Steel	Depth Gauges	8441N102	000000
3/8"	Low	Full Chisel, Semi Chisel	Three Fine-Finish Straight Round Files with Knurled Face — 8" Lg. × 5/32" Dia. One Fine-Finish Straight Joint File with Double-Cut Faces and Smooth Edges — 8" Lg. × 15/32" Wd. × 1/8" Thick. One Plastic Handle for Round Files One Round File Guide One Joint File Guide One Plastic Handle for Joint Files	Straight Joint Straight Round	Roll-Up Pouch	Steel	Depth Gauges	8441N101	00000
0.404"	Standard	Full Chisel, Semi Chisel	Three Fine-Finish Straight Round Files with Knurled Face — 8" Lg. × 7/32" Dia. One Fine-Finish Straight Joint File with Double-Cut Faces and Smooth Edges — 8" Lg. × 15/32" Wd. × 1/8" Thick. One Plastic Handle for Round Files One Round File Guide One Joint File Guide One Plastic Handle for Joint Files	Straight Joint Straight Round	Roll-Up Pouch	Steel	Depth Gauges	8441N103	00000