90273A540 | Zinc-Plated Steel Phillips Flat Head Screw

Filter by

System of Measurement

Thread Size

Length

Drive Style

Tamper-Resistant Torx

Tamper-Resistant Torx Plus

Material

Flat Head Profile

Countersink Angle

Finish

Head Diameter

Threading

Head Height

Thread Pitch

Thread Type

Specifications Met

Drive Size

Thread Direction

Thread Spacing

Tensile Strength

60,000 psi to 99,999 psi

100,000 psi to 129,999 psi

130,000 psi to 149,999 psi

150,000 psi or greater

Not Rated

Fastener Strength Grade/Class

Tip Type

DFARS Specialty Metals

RoHS

Compliant with Exemptions

Not Compliant

REACH

Compliant

Not Compliant

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

Performance

6,266 Products

Steel Phillips Flat Head Screws

One of the most common drive styles. Phillips drives have a cross-shaped opening in which a driver fits snugly for easy alignment. With four contact points, they withstand more torque than slotted drives, but drivers slip when you apply too much force.

Length is measured from the top of the head.

Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.

Cadmium-Plated Steel—The plating reduces friction between the screw and your mounting surface to prevent sticking when you tighten or loosen them. It also creates a barrier against rust.

Standard Profile—Standard-profile heads are the most common choice for flat head screws.

Undercut Profile—About a third thinner than standard heads, the undercut profile fits into shallow holes in thin material. The thin head also has more threading on the shaft, so they're often used to keep short screws from coming loose.

Military Specification—These screws are manufactured and tested to meet strict U.S. military standards for material and construction.

				Head
	Lg.	Countersink Angle	Flat Head Profile	Dia.	Ht.	Threading	Tensile Strength, psi	Specs. Met	Mil. Spec.	Certificate Type	Pkg. Qty.		Pkg.
Zinc-Plated Steel







				0-80

				3/16"	82°	Standard	0.112"	0.035"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90273A010	000000


				1/4"	82°	Standard	0.112"	0.035"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90273A015	00000




						2-56

						1/8"	82°	Undercut	0.162"	0.048"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A411	0000


						1/8"	100°	Standard	0.162"	0.037"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A425	00000
						3/16"	82°	Standard	0.162"	0.051"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A050	00000
						3/16"	100°	Standard	0.162"	0.037"	Fully Threaded	Not Rated	ASME B18.6.3	—	—	100	90471A110	00000
						1/4"	82°	Standard	0.162"	0.051"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A055	00000
						1/4"	100°	Standard	0.162"	0.037"	Fully Threaded	Not Rated	ASME B18.6.3	—	—	100	90471A115	0000
						5/16"	82°	Standard	0.162"	0.051"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A060	00000
						5/16"	100°	Standard	0.162"	0.037"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A120	00000
						3/8"	82°	Standard	0.162"	0.051"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A065	00000
						3/8"	100°	Standard	0.162"	0.037"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A130	00000
						1/2"	82°	Standard	0.162"	0.051"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A070	00000


						1/2"	100°	Standard	0.162"	0.037"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A426	00000




								4-40

								1/8"	82°	Undercut	0.212"	0.07"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A412	00000


								3/16"	82°	Undercut	0.212"	0.047"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A105	0000
								3/16"	100°	Standard	0.212"	0.049"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A150	00000
								1/4"	82°	Standard	0.212"	0.067"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A106	0000
								1/4"	100°	Standard	0.212"	0.049"	Fully Threaded	Not Rated	ASME B18.6.3	—	—	100	90471A155	0000
								5/16"	82°	Standard	0.212"	0.067"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A107	0000
								5/16"	100°	Standard	0.212"	0.049"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A157	00000
								3/8"	82°	Standard	0.212"	0.067"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A108	0000
								3/8"	100°	Standard	0.212"	0.049"	Fully Threaded	Not Rated	ASME B18.6.3	—	—	100	90471A160	0000
								7/16"	82°	Standard	0.212"	0.067"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A416	0000
								1/2"	82°	Standard	0.212"	0.067"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A110	0000


								1/2"	100°	Standard	0.212"	0.049"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A163	00000
								5/8"	82°	Standard	0.212"	0.067"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A112	0000
								5/8"	100°	Standard	0.212"	0.049"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A427	0000
								3/4"	82°	Standard	0.212"	0.067"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A113	0000
								3/4"	100°	Standard	0.212"	0.049"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A428	0000
								7/8"	82°	Standard	0.212"	0.067"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A114	0000
								1"	82°	Standard	0.212"	0.067"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A115	0000
								1"	100°	Standard	0.212"	0.049"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A429	0000
1 1/4"								82°	Standard	0.212"	0.067"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A117	00000
1 1/2"	82°							Standard	0.212"	0.067"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A119	00000




		5-40

		1/4"	82°					Standard	0.237"	0.075"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A417	00000


		3/8"	82°					Standard	0.237"	0.075"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A418	00000
		1/2"	82°					Standard	0.237"	0.075"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A419	00000




				6-32

				3/16"	82°			Undercut	0.262"	0.059"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A143	0000


				3/16"	100°			Standard	0.262"	0.06"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A431	00000
				1/4"	82°			Standard	0.262"	0.083"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A144	0000
				1/4"	100°			Standard	0.262"	0.06"	Fully Threaded	Not Rated	ASME B18.6.3	—	Material Certificate	100	90471A205	0000
				5/16"	82°			Standard	0.262"	0.083"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A145	0000
				5/16"	100°			Standard	0.262"	0.06"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A210	00000
				3/8"	82°			Standard	0.262"	0.083"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A146	0000
				3/8"	100°			Standard	0.262"	0.06"	Fully Threaded	Not Rated	ASME B18.6.3	—	—	100	90471A215	0000
				7/16"	82°			Standard	0.262"	0.083"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A147	0000
				1/2"	82°			Standard	0.262"	0.083"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A148	0000
				1/2"	100°			Standard	0.262"	0.06"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A220	0000


				5/8"	82°			Standard	0.262"	0.083"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A150	0000
				5/8"	100°			Standard	0.262"	0.06"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A432	0000
				3/4"	82°			Standard	0.262"	0.083"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A151	0000
				3/4"	100°			Standard	0.262"	0.06"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90471A223	0000
				7/8"	82°			Standard	0.262"	0.083"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A152	0000
				1"	82°	Standard		0.262"	0.083"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A153	0000
				1"	100°	Standard	0.262"	0.06"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A226	00000
				1 1/4"	82°	Standard	0.262"	0.083"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A155	0000
				1 1/4"	100°	Standard	0.262"	0.06"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A433	00000
				1 1/2"	82°	Standard	0.262"	0.083"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A157	0000


				1 1/2"	100°	Standard	0.262"	0.06"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90471A434	00000
				1 3/4"	82°	Standard	0.262"	0.083"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A420	00000
				2"	82°	Standard	0.262"	0.083"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A159	00000
				2 1/2"	82°	Standard	0.262"	0.083"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A161	00000
				3"	82°	Standard	0.262"	0.083"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A163	00000




						8-32

						3/16"	82°	Undercut	0.312"	0.094"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A413	0000


						1/4"	82°	Undercut	0.312"	0.07"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A190	0000
						1/4"	100°	Standard	0.312"	0.072"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A250	0000
						5/16"	82°	Standard	0.312"	0.1"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A191	0000
						5/16"	100°	Standard	0.312"	0.072"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A255	00000
						3/8"	82°	Standard	0.312"	0.1"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A192	0000
						3/8"	100°	Standard	0.312"	0.072"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A260	00000
						7/16"	82°	Standard	0.312"	0.1"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A193	0000
						1/2"	82°	Standard	0.312"	0.1"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A194	0000
1/2"						100°	Standard	0.312"	0.072"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A270	0000
5/8"	82°					Standard	0.312"	0.1"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A196	0000


5/8"	100°					Standard	0.312"	0.072"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A435	0000
3/4"	82°					Standard	0.312"	0.1"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A197	0000
3/4"	100°					Standard	0.312"	0.072"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A273	00000
7/8"	82°					Standard	0.312"	0.1"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A198	0000
1"	82°					Standard	0.312"	0.1"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A199	0000
1"	100°					Standard	0.312"	0.072"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90471A276	0000
1 1/4"	82°					Standard	0.312"	0.1"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A201	0000
1 1/4"	100°	Standard				0.312"	0.072"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90471A436	00000
1 1/2"	82°	Standard	0.312"			0.1"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A203	00000
1 1/2"	100°	Standard	0.312"			0.072"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A437	00000


1 3/4"	82°	Standard	0.312"			0.1"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A421	00000
2"	82°	Standard	0.312"			0.1"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A205	00000
2 1/2"	82°	Standard	0.312"			0.1"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90273A207	0000
3"	82°	Standard	0.312"			0.1"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90273A209	00000




		10-24

		1/4"	82°			Undercut	0.362"	0.11"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A414	0000


		5/16"	82°			Undercut	0.362"	0.081"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A239	0000
		3/8"	82°			Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A240	0000
		3/8"	100°			Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90471A423	0000
		7/16"	82°			Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A241	00000
		1/2"	82°			Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A242	00000
		1/2"	100°			Standard	0.362"	0.083"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A310	00000
		5/8"	82°			Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A244	0000
		5/8"	100°			Standard	0.362"	0.083"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A438	0000
		3/4"	82°			Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A245	0000
		3/4"	100°			Standard	0.362"	0.083"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A315	00000


		7/8"	82°			Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A422	00000
		1"	82°			Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A247	0000
		1"	100°			Standard	0.362"	0.083"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90471A318	00000
		1 1/4"	82°			Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A249	00000
		1 1/2"	82°			Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A251	00000
		1 3/4"	82°			Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A423	00000
		2"	82°			Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A254	00000
		2 1/2"	82°			Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90273A255	00000
		3"	82°			Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90273A257	00000
		4"	82°	Standard		0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90273A261	00000




				10-32

				1/4"	82°	Undercut	0.362"	0.081"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A825	00000


				1/4"	100°	Standard	0.362"	0.083"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A439	00000
				5/16"	82°	Undercut	0.362"	0.081"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A826	00000
				5/16"	100°	Standard	0.362"	0.083"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A441	00000
				3/8"	82°	Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A827	0000
				3/8"	100°	Standard	0.362"	0.083"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A350	00000
				7/16"	82°	Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A828	00000
				1/2"	82°	Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A829	0000
				1/2"	100°	Standard	0.362"	0.083"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A355	00000
				5/8"	82°	Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A830	0000
				5/8"	100°	Standard	0.362"	0.083"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A442	00000


				3/4"	82°	Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A831	0000
				3/4"	100°	Standard	0.362"	0.083"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A360	00000
				7/8"	82°	Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A832	00000
				1"	82°	Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A833	0000
				1"	100°	Standard	0.362"	0.083"	Fully Threaded	60,000	ASME B18.6.3	—	Material Certificate	50	90471A363	00000
				1 1/4"	82°	Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A835	0000
				1 1/4"	100°	Standard	0.362"	0.083"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A443	00000
				1 1/2"	82°	Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A836	00000
				1 1/2"	100°	Standard	0.362"	0.083"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90471A444	00000
				1 3/4"	82°	Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A424	00000


				2"	82°	Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A838	00000
				2 1/2"	82°	Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90273A840	00000
3"				82°	Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90273A842	00000




				12-24

				3/8"	82°	Undercut	0.412"	0.092"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A289	0000


				1/2"	82°	Standard	0.412"	0.132"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A291	0000
				5/8"	82°	Standard	0.412"	0.132"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A293	00000
				3/4"	82°	Standard	0.412"	0.132"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A294	00000
				7/8"	82°	Standard	0.412"	0.132"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90273A297	0000
				1"	82°	Standard	0.412"	0.132"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90273A296	0000
				1 1/4"	82°	Standard	0.412"	0.132"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90273A298	0000
				1 1/2"	82°	Standard	0.412"	0.132"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90273A299	0000
				2"	82°	Standard	0.412"	0.132"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90273A425	00000




						1/4"-20

						3/8"	82°	Undercut	0.477"	0.107"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A535	0000


						3/8"	100°	Standard	0.477"	0.11"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90471A405	0000
						1/2"	82°	Standard	0.477"	0.153"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A537	00000
						1/2"	100°	Standard	0.477"	0.11"	Fully Threaded	60,000	ASME B18.6.3	—	Material Certificate	50	90471A410	00000
						5/8"	82°	Standard	0.477"	0.153"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A539	00000
		5/8"				100°	Standard	0.477"	0.11"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90471A445	00000
		3/4"	82°			Standard	0.477"	0.153"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A540	00000
		Zinc-Plated Steel Phillips Flat Head Screw, 82 Degree Countersink Angle, 1/4"-20 Thread Size, 3/4" Long Product Detail QuantityPack of 100In stock Select a compatible file type: Parasolid Compatible Products for This Flat Head Screw
		3/4"	100°			Standard	0.477"	0.11"	Fully Threaded	60,000	ASME B18.6.3	—	—	25	90471A413	0000
		7/8"	82°			Standard	0.477"	0.153"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A541	00000
		1"	82°			Standard	0.477"	0.153"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A542	00000
		1"	100°			Standard	0.477"	0.11"	Fully Threaded	60,000	ASME B18.6.3	—	Material Certificate	25	90471A416	00000


		1 1/8"	82°			Standard	0.477"	0.153"	Fully Threaded	60,000	ASME B18.6.3	—	Material Certificate	100	90273A426	00000
		1 1/4"	82°			Standard	0.477"	0.153"	Fully Threaded	60,000	ASME B18.6.3	—	—	100	90273A544	00000
		1 1/4"	100°			Standard	0.477"	0.11"	Fully Threaded	60,000	ASME B18.6.3	—	—	25	90471A419	00000
		1 1/2"	82°			Standard	0.477"	0.153"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90273A546	00000
		1 1/2"	100°			Standard	0.477"	0.11"	Fully Threaded	60,000	ASME B18.6.3	—	Material Certificate	10	90471A422	00000
		1 3/4"	82°			Standard	0.477"	0.153"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90273A548	00000
		1 3/4"	100°			Standard	0.477"	0.11"	Fully Threaded	60,000	ASME B18.6.3	—	—	10	90471A446	0000
		2"	82°			Standard	0.477"	0.153"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90273A550	00000
		2"	100°			Standard	0.477"	0.11"	Fully Threaded	60,000	ASME B18.6.3	—	—	10	90471A447	0000
		2 1/4"	82°			Standard	0.477"	0.153"	Fully Threaded	Not Rated	ASME B18.6.3	—	—	50	90273A551	00000


		2 1/2"	82°			Standard	0.477"	0.153"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90273A552	00000
		2 1/2"	100°			Standard	0.477"	0.153"	Fully Threaded	60,000	ASME B18.6.3	—	—	10	90471A424	0000
		2 3/4"	82°			Standard	0.477"	0.153"	Partially Threaded	60,000	ASME B18.6.3	—	—	25	90273A427	00000
		3"	82°			Standard	0.477"	0.153"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90273A554	00000
		3 1/2"	82°			Standard	0.477"	0.153"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90273A571	00000
		4"	82°			Standard	0.477"	0.153"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90273A572	00000
		5"	82°			Standard	0.477"	0.153"	Partially Threaded	60,000	ASME B18.6.3	—	—	25	90273A428	00000
		6"	82°			Standard	0.477"	0.153"	Partially Threaded	60,000	ASME B18.6.3	—	—	10	90273A429	00000




						1/4"-28

						1/2"	82°	Standard	0.477"	0.153"	Fully Threaded	Not Rated	ASME B18.6.3	—	—	50	90273A557	00000


5/8"	82°					Standard	0.477"	0.153"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90273A430	00000
3/4"	82°					Standard	0.477"	0.153"	Fully Threaded	Not Rated	ASME B18.6.3	—	—	50	90273A559	00000
1"	82°					Standard	0.477"	0.153"	Fully Threaded	60,000	ASME B18.6.3	—	—	10	90273A431	00000




						5/16"-18

						1/2"	82°	Undercut	0.597"	0.134"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90273A578	00000


						5/8"	82°	Standard	0.597"	0.191"	Fully Threaded	60,000	ASME B18.6.3	—	Material Certificate	50	90273A432	00000
						3/4"	82°	Standard	0.597"	0.191"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90273A581	00000
						3/4"	100°	Standard	0.597"	0.138"	Fully Threaded	60,000	ASME B18.6.3	—	—	25	90471A448	0000
						7/8"	82°	Standard	0.597"	0.191"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90273A433	00000
				1"		82°	Standard	0.597"	0.191"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90273A583	00000
				1"	100°	Standard	0.597"	0.138"	Fully Threaded	60,000	ASME B18.6.3	—	—	25	90471A449	00000
				1 1/4"	82°	Standard	0.597"	0.191"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90273A585	00000
				1 1/4"	100°	Standard	0.597"	0.138"	Fully Threaded	60,000	ASME B18.6.3	—	—	25	90471A451	00000
				1 1/2"	82°	Standard	0.597"	0.191"	Fully Threaded	60,000	ASME B18.6.3	—	—	50	90273A587	00000
				1 1/2"	100°	Standard	0.597"	0.138"	Fully Threaded	60,000	ASME B18.6.3	—	—	25	90471A452	00000


				1 3/4"	82°	Standard	0.597"	0.191"	Fully Threaded	60,000	ASME B18.6.3	—	—	25	90273A434	00000
				2"	82°	Standard	0.597"	0.191"	Fully Threaded	60,000	ASME B18.6.3	—	—	10	90273A501	0000
				2 1/2"	82°	Standard	0.597"	0.191"	Fully Threaded	60,000	ASME B18.6.3	—	—	10	90273A593	0000
				3"	82°	Standard	0.597"	0.191"	Fully Threaded	60,000	ASME B18.6.3	—	—	10	90273A505	0000
				3 1/2"	82°	Standard	0.597"	0.191"	Partially Threaded	60,000	ASME B18.6.3	—	—	10	90273A435	0000
				4"	82°	Standard	0.597"	0.191"	Partially Threaded	60,000	ASME B18.6.3	—	—	10	90273A436	00000




						3/8"-16

						1/2"	82°	Undercut	0.717"	0.161"	Fully Threaded	Not Rated	ASME B18.6.3	—	—	25	90273A415	0000


						5/8"	82°	Standard	0.717"	0.23"	Fully Threaded	60,000	ASME B18.6.3	—	—	25	90273A437	00000
						3/4"	82°	Standard	0.717"	0.23"	Fully Threaded	60,000	ASME B18.6.3	—	—	25	90273A438	00000
						3/4"	100°	Standard	0.717"	0.165"	Fully Threaded	60,000	ASME B18.6.3	—	—	25	90471A453	00000
						1"	82°	Standard	0.717"	0.23"	Fully Threaded	60,000	ASME B18.6.3	—	—	25	90273A624	0000
						1"	100°	Standard	0.717"	0.165"	Fully Threaded	60,000	ASME B18.6.3	—	—	10	90471A454	0000
						1 1/4"	82°	Standard	0.717"	0.23"	Fully Threaded	60,000	ASME B18.6.3	—	—	25	90273A439	00000
						1 1/4"	100°	Standard	0.717"	0.165"	Fully Threaded	60,000	ASME B18.6.3	—	—	10	90471A455	0000
						1 1/2"	82°	Standard	0.717"	0.23"	Fully Threaded	60,000	ASME B18.6.3	—	—	10	90273A628	0000
						1 3/4"	82°	Standard	0.717"	0.23"	Fully Threaded	60,000	ASME B18.6.3	—	—	10	90273A440	00000
						2"	82°	Standard	0.717"	0.23"	Fully Threaded	60,000	ASME B18.6.3	—	—	10	90273A441	00000


						2 1/2"	82°	Standard	0.717"	0.23"	Partially Threaded	60,000	ASME B18.6.3	—	—	10	90273A442	00000
						3"	82°	Standard	0.717"	0.23"	Fully Threaded	60,000	ASME B18.6.3	—	—	10	90273A636	0000
						3 1/2"	82°	Standard	0.717"	0.23"	Partially Threaded	60,000	ASME B18.6.3	—	—	10	90273A443	00000
						4"	82°	Standard	0.717"	0.23"	Partially Threaded	60,000	ASME B18.6.3	—	—	5	90273A444	00000




						1/2"-13

						1"	82°	Standard	0.815"	0.223"	Fully Threaded	60,000	ASME B18.6.3	—	—	10	90273A445	00000


						1 1/4"	82°	Standard	0.815"	0.223"	Fully Threaded	60,000	ASME B18.6.3	—	—	10	90273A446	00000
						1 1/2"	82°	Standard	0.815"	0.223"	Fully Threaded	60,000	ASME B18.6.3	—	—	5	90273A447	00000
						2"	82°	Standard	0.815"	0.223"	Fully Threaded	60,000	ASME B18.6.3	—	—	5	90273A449	00000
						3"	82°	Standard	0.815"	0.223"	Partially Threaded	60,000	ASME B18.6.3	—	—	5	90273A450	00000




						M2 × 0.4 mm

						3 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A011	0000


						4 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A001	0000
						5 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A002	0000
						6 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A003	0000
						8 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A004	0000
						10 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A005	0000
						12 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A006	0000
						16 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A007	0000
						20 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A008	0000




								M2.5 × 0.45 mm

								4 mm	90°	Standard	4.7 mm	1.5 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A012	0000


								5 mm	90°	Standard	4.7 mm	1.5 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A014	0000
								6 mm	90°	Standard	4.7 mm	1.5 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A016	0000
				8 mm				90°	Standard	4.7 mm	1.5 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A018	0000
				10 mm	90°			Standard	4.7 mm	1.5 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A020	0000
				12 mm	90°			Standard	4.7 mm	1.5 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A022	0000
				16 mm	90°			Standard	4.7 mm	1.5 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A024	0000
				20 mm	90°			Standard	4.7 mm	1.5 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A026	0000
				25 mm	90°			Standard	4.7 mm	1.5 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A028	0000




								M3 × 0.5 mm

								4 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A112	0000


								5 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A114	0000
								6 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A116	0000
								8 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A118	0000
								10 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A120	0000
								12 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A122	0000
								14 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A124	0000
								16 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A126	0000
								18 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A127	0000
								20 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A128	0000
								25 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A130	0000


		30 mm	90°					Standard	5.6 mm	1.65 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A134	0000
		35 mm	90°					Standard	5.6 mm	1.65 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A135	00000
		40 mm	90°					Standard	5.6 mm	1.65 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A136	00000
		45 mm	90°					Standard	5.6 mm	1.65 mm	Fully Threaded	60,000	DIN 965	—	—	50	91420A138	0000
		50 mm	90°					Standard	5.6 mm	1.65 mm	Fully Threaded	60,000	DIN 965	—	—	50	91420A140	0000
		60 mm	90°					Standard	5.6 mm	1.65 mm	Fully Threaded	60,000	DIN 965	—	—	10	91420A143	0000




								M3.5 × 0.6 mm

6 mm	90°							Standard	6.5 mm	1.93 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A173	0000


8 mm	90°							Standard	6.5 mm	1.93 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A175	0000
10 mm	90°							Standard	6.5 mm	1.93 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A177	0000
12 mm	90°							Standard	6.5 mm	1.93 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A179	0000
16 mm	90°							Standard	6.5 mm	1.93 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A183	0000
20 mm	90°							Standard	6.5 mm	1.93 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A187	0000
25 mm	90°							Standard	6.5 mm	1.93 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A192	00000
30 mm	90°							Standard	6.5 mm	1.93 mm	Fully Threaded	60,000	DIN 965	—	—	50	91420A194	0000




								M4 × 0.7 mm

						5 mm		90°	Standard	7.5 mm	2.2 mm	Fully Threaded	60,000	DIN 965	—	Material Certificate	100	91420A214	0000


						6 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A216	0000
						8 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A218	0000
						10 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A220	0000
						12 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A222	0000
						14 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A224	0000
						16 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A226	0000
						18 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A277	0000
						20 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A228	0000
						22 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A231	0000
						25 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A230	0000


						30 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A235	00000
						35 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A240	0000
				40 mm		90°	Standard	7.5 mm	2.2 mm	Fully Threaded	60,000	DIN 965	—	—	50	91420A250	00000
				45 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	60,000	DIN 965	—	—	50	91420A260	0000
				50 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	60,000	DIN 965	—	—	50	91420A265	0000
				60 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	60,000	DIN 965	—	—	50	91420A270	00000
				70 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	60,000	DIN 965	—	—	25	91420A280	00000
				80 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	60,000	DIN 965	—	—	25	91420A290	00000




						M5 × 0.8 mm

						6 mm	90°	Standard	9.2 mm	2.5 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A316	0000


						8 mm	90°	Standard	9.2 mm	2.5 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A318	0000
						10 mm	90°	Standard	9.2 mm	2.5 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A320	0000
						12 mm	90°	Standard	9.2 mm	2.5 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A322	0000
						14 mm	90°	Standard	9.2 mm	2.5 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A324	0000
						16 mm	90°	Standard	9.2 mm	2.5 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A326	00000
						18 mm	90°	Standard	9.2 mm	2.5 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A329	00000
						20 mm	90°	Standard	9.2 mm	2.5 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A328	0000
						25 mm	90°	Standard	9.2 mm	2.5 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A330	00000
						30 mm	90°	Standard	9.2 mm	2.5 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A332	00000
						35 mm	90°	Standard	9.2 mm	2.5 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A340	00000


		40 mm				90°	Standard	9.2 mm	2.5 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A342	00000
		50 mm	90°			Standard	9.2 mm	2.5 mm	Fully Threaded	60,000	DIN 965	—	Material Certificate	100	91420A346	00000
		60 mm	90°			Standard	9.2 mm	2.5 mm	Fully Threaded	60,000	DIN 965	—	—	25	91420A350	00000
		70 mm	90°			Standard	9.2 mm	2.5 mm	Fully Threaded	60,000	DIN 965	—	—	25	91420A370	00000
		80 mm	90°			Standard	9.2 mm	2.5 mm	Fully Threaded	60,000	DIN 965	—	—	10	91420A380	0000




						M6 × 1 mm

						8 mm	90°	Standard	11 mm	3 mm	Fully Threaded	60,000	DIN 965	—	—	50	91420A410	00000


						10 mm	90°	Standard	11 mm	3 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A420	00000
						12 mm	90°	Standard	11 mm	3 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A424	00000
14 mm						90°	Standard	11 mm	3 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A425	00000
16 mm	90°					Standard	11 mm	3 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A426	00000
18 mm	90°					Standard	11 mm	3 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A569	00000
20 mm	90°					Standard	11 mm	3 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A428	00000
25 mm	90°					Standard	11 mm	3 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A430	00000
30 mm	90°					Standard	11 mm	3 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A438	00000
35 mm	90°					Standard	11 mm	3 mm	Fully Threaded	60,000	DIN 965	—	—	100	91420A440	00000
40 mm	90°					Standard	11 mm	3 mm	Fully Threaded	60,000	DIN 965	—	—	50	91420A442	00000


45 mm	90°					Standard	11 mm	3 mm	Fully Threaded	60,000	DIN 965	—	—	50	91420A444	0000
50 mm	90°					Standard	11 mm	3 mm	Fully Threaded	60,000	DIN 965	—	—	50	91420A446	00000
60 mm	90°					Standard	11 mm	3 mm	Fully Threaded	60,000	DIN 965	—	—	25	91420A460	00000
70 mm	90°					Standard	11 mm	3 mm	Fully Threaded	60,000	DIN 965	—	—	10	91420A470	0000
80 mm	90°					Standard	11 mm	3 mm	Fully Threaded	60,000	DIN 965	—	—	10	91420A480	0000




						M8 × 1.25 mm

						12 mm	90°	Standard	14.5 mm	4 mm	Fully Threaded	60,000	DIN 965	—	—	10	91420A515	00000


						14 mm	90°	Standard	14.5 mm	4 mm	Fully Threaded	60,000	DIN 965	—	—	10	91420A517	0000
						16 mm	90°	Standard	14.5 mm	4 mm	Fully Threaded	60,000	DIN 965	—	—	50	91420A526	00000
						20 mm	90°	Standard	14.5 mm	4 mm	Fully Threaded	60,000	DIN 965	—	—	50	91420A528	00000
						25 mm	90°	Standard	14.5 mm	4 mm	Fully Threaded	60,000	DIN 965	—	—	50	91420A530	00000
						30 mm	90°	Standard	14.5 mm	4 mm	Fully Threaded	60,000	DIN 965	—	—	25	91420A538	00000
				35 mm		90°	Standard	14.5 mm	4 mm	Fully Threaded	60,000	DIN 965	—	—	25	91420A540	00000
				40 mm	90°	Standard	14.5 mm	4 mm	Fully Threaded	60,000	DIN 965	—	—	25	91420A542	00000
				50 mm	90°	Standard	14.5 mm	4 mm	Fully Threaded	60,000	DIN 965	—	—	25	91420A546	00000
				60 mm	90°	Standard	14.5 mm	4 mm	Fully Threaded	60,000	DIN 965	—	—	10	91420A552	00000
				80 mm	90°	Standard	14.5 mm	4 mm	Fully Threaded	60,000	DIN 965	—	—	5	91420A568	00000


				Cadmium-Plated Steel







								4-40

								3/16"	82°	Undercut	0.225"	0.047"	Fully Threaded	60,000	—	MS35190-220, NASM35190	—	100	91321A111	00000


								3/16"	100°	Standard	0.225"	0.049"	Fully Threaded	60,000	—	MS24693-S1, NASM24693	—	100	94023A111	0000
								1/4"	82°	Standard	0.225"	0.067"	Fully Threaded	60,000	—	MS35190-221, NASM35190	—	100	91321A112	00000
								1/4"	100°	Standard	0.225"	0.049"	Fully Threaded	60,000	—	MS24693-S2, NASM24693	—	100	94023A112	00000
								3/8"	82°	Standard	0.225"	0.067"	Fully Threaded	60,000	—	MS35190-223, NASM35190	—	100	91321A113	00000
								3/8"	100°	Standard	0.225"	0.049"	Fully Threaded	60,000	—	MS24693-S4, NASM24693	—	100	94023A113	00000
								1/2"	82°	Standard	0.225"	0.067"	Fully Threaded	60,000	—	MS35190-225, NASM35190	—	100	91321A114	00000
		1/2"						100°	Standard	0.225"	0.049"	Fully Threaded	60,000	—	MS24693-S6, NASM24693	—	100	94023A114	00000




								6-32

								1/4"	82°	Standard	0.279"	0.083"	Fully Threaded	60,000	—	MS35190-234, NASM35190	—	100	91321A115	00000


								1/4"	100°	Standard	0.279"	0.06"	Fully Threaded	60,000	—	MS24693-S24, NASM24693	—	100	94023A115	00000
								3/8"	82°	Standard	0.279"	0.083"	Fully Threaded	60,000	—	MS35190-236, NASM35190	—	100	91321A116	00000
								3/8"	100°	Standard	0.279"	0.06"	Fully Threaded	60,000	—	MS24693-S26, NASM24693	Material Certificate	100	94023A116	00000
								1/2"	82°	Standard	0.279"	0.083"	Fully Threaded	60,000	—	MS35190-238, NASM35190	—	100	91321A117	00000
								1/2"	100°	Standard	0.279"	0.06"	Fully Threaded	60,000	—	MS24693-S28, NASM24693	—	50	94023A117	0000
								3/4"	82°	Standard	0.279"	0.083"	Fully Threaded	60,000	—	MS35190-240, NASM35190	—	100	91321A118	00000




										8-32

										1/4"	82°	Undercut	0.332"	0.07"	Fully Threaded	60,000	—	MS35190-249, NASM35190	—	100	91321A119	00000


										3/8"	82°	Standard	0.332"	0.1"	Fully Threaded	60,000	—	MS35190-251, NASM35190	—	100	91321A121	00000
3/8"										100°	Standard	0.332"	0.072"	Fully Threaded	60,000	—	MS24693-S48, NASM24693	—	50	94023A118	0000
1/2"	82°									Standard	0.332"	0.1"	Fully Threaded	60,000	—	MS35190-253, NASM35190	—	100	91321A122	00000
1/2"	100°									Standard	0.332"	0.072"	Fully Threaded	60,000	—	MS24693-S50, NASM24693	—	50	94023A119	0000
3/4"	82°									Standard	0.332"	0.1"	Fully Threaded	60,000	—	MS35190-255, NASM35190	—	100	91321A123	00000
3/4"	100°									Standard	0.332"	0.072"	Fully Threaded	60,000	—	MS24693-S52, NASM24693	—	50	94023A121	00000




										10-32

										3/8"	82°	Standard	0.385"	0.116"	Fully Threaded	60,000	—	MS35191-270, NASM35191	—	50	91321A124	0000


										3/8"	100°	Standard	0.385"	0.083"	Fully Threaded	60,000	—	MS24693-S270, NASM24693	—	50	94023A122	00000
										1/2"	82°	Standard	0.385"	0.116"	Fully Threaded	60,000	—	MS35191-272, NASM35191	—	50	91321A125	00000
										1/2"	100°	Standard	0.385"	0.083"	Fully Threaded	60,000	—	MS24693-S272, NASM24693	—	50	94023A123	00000
										3/4"	82°	Standard	0.385"	0.116"	Fully Threaded	60,000	—	MS35191-274, NASM35191	—	50	91321A126	00000
										3/4"	100°	Standard	0.385"	0.083"	Fully Threaded	60,000	—	MS24693-S274, NASM24693	—	50	94023A124	00000
										1"	82°	Standard	0.385"	0.116"	Fully Threaded	60,000	—	MS35191-276, NASM35191	—	50	91321A127	00000
				1"						100°	Standard	0.385"	0.083"	Fully Threaded	60,000	—	MS24693-S276, NASM24693	—	50	94023A125	00000




						1/4"-20

						1/2"	82°			Standard	0.507"	0.153"	Fully Threaded	60,000	—	MS35190-287, NASM35190	—	25	91321A128	00000


						1/2"	100°			Standard	0.507"	0.11"	Fully Threaded	60,000	—	MS24693-S94, NASM24693	—	25	94023A126	0000
						3/4"	82°			Standard	0.507"	0.153"	Fully Threaded	60,000	—	MS35190-289, NASM35190	—	25	91321A129	00000
						1"	82°			Standard	0.507"	0.153"	Fully Threaded	60,000	—	MS35190-291, NASM35190	—	25	91321A131	00000
						1 1/2"	82°			Standard	0.507"	0.153"	Fully Threaded	60,000	—	MS35190-293, NASM35190	—	25	91321A132	00000