93085A618 | Stainless Steel Phillips Flat Head Screws

Filter by

System of Measurement

Thread Size

Length

Drive Style

Tamper-Resistant Torx

Tamper-Resistant Torx Plus

Material

Flat Head Profile

Countersink Angle

Finish

Head Diameter

Threading

Head Height

Thread Pitch

Thread Type

Specifications Met

Drive Size

Thread Direction

Thread Spacing

Tensile Strength

60,000 psi to 99,999 psi

100,000 psi to 129,999 psi

130,000 psi to 149,999 psi

150,000 psi or greater

Not Rated

Fastener Strength Grade/Class

Tip Type

DFARS Specialty Metals

RoHS

Compliant with Exemptions

Not Compliant

REACH

Compliant

Not Compliant

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

Performance

6,266 Products

Stainless Steel Phillips Flat Head Screws

These screws are made of stainless steel, so they won't rust or corrode when exposed to moisture and chemicals. The Phillips drive has a cross-shaped opening in which a driver fits snugly for easy alignment. With four contact points, they withstand more torque than slotted drives, but drivers slip when you apply too much force.

Length is measured from the top of the head.

18-8 Stainless Steel—The choice for wet and outdoor environments, these screws won't rust. However, they don't hold up to the harsh chemicals that 316 stainless steel can.

Black-Oxide 18-8 Stainless Steel—Typically chosen for their appearance, these screws have a dark, matte coating to create a finished look. They won't rust in wet and outdoor environments, but they don't hold up to the harsh chemicals that 316 stainless steel can.

PTFE-Coated 18-8 Stainless Steel—A slippery PTFE coating prevents these screws from binding or sticking during installation. They resist rust in wet and outdoor environments and can handle occasional exposure to mild acids and chemicals without corroding.

Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these screws won't degrade when exposed to harsh weather, salt water, and most chemicals.

Standard Profile—Standard-profile heads are the most common choice for flat head screws.

Undercut Profile—About a third thinner than standard heads, the undercut profile fits into shallow holes in thin material. The thin head also has more threading on the shaft, so they're often used to keep short screws from coming loose.

Military Specification—These screws are manufactured and tested to meet strict U.S. military standards for material and construction.

				Head
	Lg.	Countersink Angle	Flat Head Profile	Dia.	Ht.	Threading	Tensile Strength, psi	Specs. Met	Mil. Spec.	Certificate Type	Pkg. Qty.		Pkg.
18-8 Stainless Steel







				0-80

				3/32"	82°	Undercut	0.112"	0.025"	Fully Threaded	70,000	ASME B18.6.3	—	—	100	91771A848	000000


				1/8"	82°	Undercut	0.112"	0.025"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A052	0000
				1/8"	82°	Undercut	0.119"	0.025"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51960-1	—	10	96877A070	0000
				1/8"	100°	Standard	0.112"	0.026"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	50	91771A915	0000
				5/32"	82°	Standard	0.112"	0.035"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A053	00000
				5/32"	100°	Standard	0.112"	0.026"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A916	0000
				3/16"	82°	Standard	0.112"	0.035"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A054	0000
				3/16"	82°	Standard	0.119"	0.035"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51960-2	—	50	96877A076	0000
				3/16"	82°	Undercut	0.112"	0.025"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A883	00000
				3/16"	100°	Standard	0.112"	0.026"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A917	0000
				3/16"	100°	Standard	0.119"	0.026"	Fully Threaded	70,000	—	MS24693-C420, NASM24693	—	50	93085A841	0000


				7/32"	82°	Standard	0.112"	0.035"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A040	00000
				7/32"	100°	Standard	0.112"	0.026"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A918	0000
				1/4"	82°	Standard	0.112"	0.035"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A055	0000
				1/4"	82°	Standard	0.119"	0.035"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51960-3	Material Certificate	10	96877A078	0000
				1/4"	100°	Standard	0.112"	0.026"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A919	0000
				1/4"	100°	Standard	0.119"	0.026"	Fully Threaded	70,000	—	MS24693-C421, NASM24693	—	50	93085A842	0000
				9/32"	82°	Standard	0.112"	0.035"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A041	00000
				9/32"	100°	Standard	0.112"	0.026"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A920	0000
				5/16"	82°	Standard	0.112"	0.035"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A056	0000
				5/16"	82°	Standard	0.119"	0.035"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51960-4	Material Certificate	100	96877A733	00000


				5/16"	100°	Standard	0.112"	0.026"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A921	0000
				5/16"	100°	Standard	0.119"	0.026"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C422, NASM24693	Material Certificate	50	96877A749	0000
				11/32"	82°	Standard	0.112"	0.035"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A042	00000
				11/32"	100°	Standard	0.112"	0.026"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A922	0000
				3/8"	82°	Standard	0.112"	0.035"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A057	0000
				3/8"	82°	Standard	0.119"	0.035"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51960-5	Material Certificate	100	96877A734	00000
				3/8"	100°	Standard	0.112"	0.026"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A923	0000
				3/8"	100°	Standard	0.119"	0.026"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C423, NASM24693	Material Certificate	50	96877A751	0000
				7/16"	82°	Standard	0.112"	0.035"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A058	0000
				1/2"	82°	Standard	0.112"	0.035"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A059	0000


				1/2"	100°	Standard	0.112"	0.026"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A925	0000
				5/8"	82°	Standard	0.112"	0.035"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A060	0000
				3/4"	82°	Standard	0.112"	0.035"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A071	0000
				1"	82°	Standard	0.112"	0.035"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A102	00000




						1-64

						1/8"	82°	Undercut	0.137"	0.031"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A063	0000


						3/16"	82°	Standard	0.137"	0.043"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A065	0000
						1/4"	82°	Standard	0.137"	0.043"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A066	0000
						3/8"	82°	Standard	0.137"	0.043"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A068	0000
1/2"						82°	Standard	0.137"	0.043"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A070	00000
3/4"	82°					Standard	0.137"	0.043"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A176	0000




		1-72

		1/8"	82°			Undercut	0.137"	0.031"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A164	0000


		3/16"	82°			Standard	0.137"	0.043"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A165	0000
		1/4"	82°			Standard	0.137"	0.043"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A166	0000
		5/16"	82°			Standard	0.137"	0.043"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A167	0000
		3/8"	82°			Standard	0.137"	0.043"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A168	0000
		1/2"	82°			Standard	0.137"	0.043"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A170	00000
		1"	82°			Standard	0.137"	0.043"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A175	0000




						2-56

						1/8"	82°	Undercut	0.162"	0.036"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A074	0000


						1/8"	82°	Undercut	0.172"	0.036"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-1	—	50	96877A110	0000
						1/8"	100°	Standard	0.172"	0.037"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C16, NASM24693	Material Certificate	50	93085A010	0000
						5/32"	82°	Standard	0.162"	0.051"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A075	0000
						5/32"	82°	Undercut	0.162"	0.036"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A884	0000
						5/32"	100°	Standard	0.172"	0.037"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C17, NASM24693	Material Certificate	50	93085A013	0000
						3/16"	82°	Standard	0.162"	0.051"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A076	0000
						3/16"	82°	Standard	0.172"	0.051"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-2	Material Certificate	100	96877A115	00000
						3/16"	82°	Undercut	0.162"	0.036"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A101	0000
						3/16"	100°	Standard	0.162"	0.037"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A926	0000
						3/16"	100°	Standard	0.172"	0.037"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NAS662C2R3	Material Certificate	100	93085A015	00000


						7/32"	82°	Standard	0.162"	0.051"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A077	0000
						1/4"	82°	Standard	0.162"	0.051"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A104	0000
						1/4"	82°	Standard	0.172"	0.051"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-3	—	100	96877A118	00000
						1/4"	82°	Undercut	0.162"	0.036"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A104	0000
						1/4"	100°	Standard	0.162"	0.037"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A927	0000
						1/4"	100°	Standard	0.172"	0.037"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NAS662C2R4	Material Certificate	100	93085A017	00000
						5/16"	82°	Standard	0.162"	0.051"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A078	0000
						5/16"	82°	Standard	0.172"	0.051"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-4	Material Certificate	100	96877A121	00000
						5/16"	82°	Undercut	0.162"	0.036"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A107	0000
						5/16"	100°	Standard	0.162"	0.037"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A928	0000


						5/16"	100°	Standard	0.172"	0.037"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NAS662C2R5	—	100	93085A019	00000
						3/8"	82°	Standard	0.162"	0.051"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A105	0000
						3/8"	82°	Standard	0.172"	0.051"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-5	—	100	96877A123	00000
						3/8"	82°	Undercut	0.162"	0.036"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A457	0000
						3/8"	100°	Standard	0.162"	0.037"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A929	0000
				3/8"		100°	Standard	0.172"	0.037"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NAS662C2R6	Material Certificate	100	93085A021	00000
				7/16"	82°	Standard	0.162"	0.051"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A080	0000
				7/16"	82°	Standard	0.172"	0.051"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-6	—	50	96877A117	0000
				7/16"	82°	Undercut	0.162"	0.036"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A885	0000
				7/16"	100°	Standard	0.162"	0.037"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A930	0000


				1/2"	82°	Standard	0.162"	0.051"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A081	0000
				1/2"	82°	Standard	0.172"	0.051"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-7	—	100	96877A134	00000
				1/2"	82°	Undercut	0.162"	0.036"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A458	0000
				1/2"	100°	Standard	0.162"	0.037"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A931	0000
				1/2"	100°	Standard	0.172"	0.037"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NAS662C2R8	Material Certificate	100	93085A023	00000
				9/16"	82°	Standard	0.162"	0.051"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A082	0000
5/8"				82°	Standard	0.162"	0.051"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A083	0000
5/8"	82°			Standard	0.172"	0.051"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-8	—	50	96877A138	00000
5/8"	100°			Standard	0.172"	0.036"	Fully Threaded	70,000	—	Fed. Spec. FF-S-92, NAS662C2R10	—	50	93085A838	0000
3/4"	82°			Standard	0.162"	0.051"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A084	0000


3/4"	82°			Standard	0.172"	0.051"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-9	Material Certificate	50	96877A146	00000
3/4"	82°			Undercut	0.162"	0.036"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A886	0000
3/4"	100°			Standard	0.172"	0.036"	Fully Threaded	70,000	—	Fed. Spec. FF-S-92, NAS662C2R12	—	50	93085A839	0000
7/8"	82°			Standard	0.162"	0.051"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A085	0000
7/8"	82°			Standard	0.172"	0.051"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-10	Material Certificate	25	96877A147	0000
1"	82°			Standard	0.162"	0.051"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A140	0000
1 1/4"	82°			Standard	0.162"	0.051"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A141	0000
1 1/2"	82°			Standard	0.162"	0.051"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A267	0000




		2-64

		1/8"	82°	Undercut	0.162"	0.036"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A180	00000


		3/16"	82°	Undercut	0.162"	0.036"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A181	00000
		1/4"	82°	Standard	0.162"	0.051"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A182	00000
		3/8"	82°	Standard	0.162"	0.051"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A183	00000




				3-48

				1/8"	82°	Undercut	0.187"	0.042"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A089	0000


				3/16"	82°	Standard	0.187"	0.059"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A091	0000
				3/16"	82°	Undercut	0.187"	0.042"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A887	0000
				1/4"	82°	Standard	0.187"	0.059"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A092	0000
				1/4"	82°	Undercut	0.187"	0.042"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A901	0000
				5/16"	82°	Standard	0.187"	0.059"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A093	0000
				5/16"	82°	Undercut	0.187"	0.042"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A889	0000
				3/8"	82°	Standard	0.187"	0.059"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A094	0000
				3/8"	82°	Undercut	0.187"	0.042"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A890	0000
				1/2"	82°	Standard	0.187"	0.059"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A096	0000
				1/2"	82°	Undercut	0.187"	0.042"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A891	0000


				5/8"	82°	Standard	0.187"	0.059"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A098	0000
				5/8"	82°	Undercut	0.187"	0.042"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A892	00000
				3/4"	82°	Standard	0.187"	0.059"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A099	0000
				3/4"	82°	Undercut	0.187"	0.042"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A893	00000
				1"	82°	Standard	0.187"	0.059"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A101	0000




						3-56

						3/16"	82°	Standard	0.187"	0.059"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A184	0000


						1/4"	82°	Standard	0.187"	0.059"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A185	0000
						3/8"	82°	Standard	0.187"	0.059"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A186	0000




								4-40

								1/8"	82°	Undercut	0.212"	0.047"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A103	0000


								1/8"	100°	Standard	0.212"	0.049"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A932	0000
								1/8"	100°	Undercut	0.212"	0.047"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	50	91771A974	00000
								3/16"	82°	Undercut	0.212"	0.047"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91099A152	0000
								3/16"	82°	Undercut	0.225"	0.047"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-12	Material Certificate	50	96877A198	0000
								3/16"	100°	Standard	0.212"	0.049"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A933	0000
								3/16"	100°	Standard	0.225"	0.049"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C1, NASM24693	—	100	93085A105	00000
								7/32"	82°	Standard	0.212"	0.067"	Fully Threaded	70,000	ASME B18.6.3	—	—	100	91771A849	0000
								1/4"	82°	Standard	0.212"	0.067"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A106	0000
1/4"								82°	Standard	0.225"	0.067"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-13	Material Certificate	100	96877A200	00000
1/4"	82°							Undercut	0.212"	0.047"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91099A155	0000


1/4"	100°							Standard	0.212"	0.049"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A934	0000
1/4"	100°							Standard	0.225"	0.049"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C2, NASM24693	—	100	93085A106	00000
1/4"	100°							Undercut	0.212"	0.047"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A975	00000
5/16"	82°							Standard	0.212"	0.067"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A107	0000
5/16"	82°							Standard	0.225"	0.067"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-14	Material Certificate	100	96877A205	00000
5/16"	82°							Undercut	0.212"	0.047"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A160	0000
5/16"	100°							Standard	0.212"	0.049"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A935	0000
5/16"	100°							Standard	0.225"	0.049"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C3, NASM24693	Material Certificate	100	93085A107	00000
3/8"	82°	Standard						0.212"	0.067"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A108	0000
3/8"	82°	Standard	0.225"					0.067"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-15	Material Certificate	100	96877A209	00000


3/8"	82°	Undercut	0.212"					0.047"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91099A165	0000
3/8"	100°	Standard	0.212"					0.049"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A936	0000
3/8"	100°	Standard	0.225"					0.049"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C4, NASM24693	—	100	93085A108	00000
7/16"	82°	Standard	0.212"					0.067"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A109	0000
7/16"	82°	Standard	0.225"					0.067"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-16	—	50	96877A199	00000
7/16"	82°	Undercut	0.212"					0.047"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A459	0000
7/16"	100°	Standard	0.212"					0.049"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A937	0000
7/16"	100°	Standard	0.225"					0.049"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C5, NASM24693	Material Certificate	100	93085A109	00000
1/2"	82°	Standard	0.212"					0.067"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A110	0000
1/2"	82°	Standard	0.225"					0.067"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-17	—	50	96877A216	0000


1/2"	82°	Undercut	0.212"					0.047"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A167	0000
1/2"	100°	Standard	0.212"					0.049"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A938	0000
1/2"	100°	Standard	0.225"					0.049"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C6, NASM24693	Material Certificate	100	93085A110	00000
9/16"	82°	Standard	0.212"					0.067"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A121	0000
5/8"	82°	Standard	0.212"					0.067"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A112	0000
5/8"	82°	Standard	0.225"					0.067"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-18	Material Certificate	50	96877A222	00000
5/8"	82°	Undercut	0.212"					0.047"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A169	0000
5/8"	100°	Standard	0.225"					0.049"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C7, NASM24693	Material Certificate	100	93085A112	00000
11/16"	82°	Standard	0.212"					0.067"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A043	0000
3/4"	82°	Standard	0.212"					0.067"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A113	0000


3/4"	82°	Standard	0.225"	0.067"	Fully Threaded			70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-19	Material Certificate	50	96877A224	00000
3/4"	82°	Undercut	0.212"	0.047"	Fully Threaded			80,000	ASME B18.6.3	—	—	100	91099A461	0000
3/4"	100°	Standard	0.225"	0.049"	Fully Threaded			70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C8, NASM24693	Material Certificate	50	93085A113	00000
7/8"	82°	Standard	0.212"	0.067"	Fully Threaded			80,000	ASME B18.6.3	—	—	100	91771A114	0000
7/8"	82°	Standard	0.225"	0.067"	Fully Threaded			70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-20	—	50	96877A711	00000
7/8"	100°	Standard	0.225"	0.049"	Fully Threaded			70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C9, NASM24693	Material Certificate	50	93085A116	00000
1"	82°	Standard	0.212"	0.067"	Fully Threaded			80,000	ASME B18.6.3	—	—	100	91771A115	0000
1"	82°	Standard	0.225"	0.067"	Fully Threaded			70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-21	—	50	96877A625	00000
1"	82°	Undercut	0.212"	0.047"	Fully Threaded			80,000	ASME B18.6.3	—	—	100	91099A462	0000
1"	100°	Standard	0.225"	0.049"	Fully Threaded	70,000		SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C10, NASM24693	—	25	93085A119	0000
1 1/8"	82°	Standard	0.212"	0.067"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A116	0000
1 1/8"	82°	Undercut	0.212"	0.047"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A894	0000
1 1/8"	100°	Standard	0.225"	0.049"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C11, NASM24693	—	25	93085A122	0000
1 1/4"	82°	Standard	0.212"	0.067"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A117	0000
1 1/4"	82°	Standard	0.225"	0.067"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-22	—	50	96877A712	00000
1 1/4"	82°	Undercut	0.212"	0.047"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A463	0000
1 1/4"	100°	Standard	0.225"	0.049"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C12, NASM24693	—	50	93085A851	00000
1 1/2"	82°	Standard	0.212"	0.067"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A119	0000
1 1/2"	82°	Standard	0.225"	0.067"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-23	—	25	96877A713	0000
1 1/2"	82°	Undercut	0.212"	0.047"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A895	0000
1 1/2"	100°	Standard	0.225"	0.049"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C14, NASM24693	—	25	93085A852	0000
1 3/4"	82°	Standard	0.212"	0.067"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A122	0000
2"	82°	Standard	0.212"	0.067"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A120	0000
2 1/2"	82°	Standard	0.212"	0.067"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A123	0000



		4-48

		3/16"	82°	Undercut	0.212"	0.047"	Fully Threaded	70,000	ASME B18.6.3	—	—	100	91771A851	0000


		1/4"	82°	Standard	0.212"	0.067"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A741	0000
		3/8"	82°	Standard	0.212"	0.067"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A742	00000
		1/2"	82°	Standard	0.212"	0.067"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A743	0000
		1"	82°	Standard	0.212"	0.067"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A746	0000




				5-40

				1/4"	82°	Standard	0.237"	0.075"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A124	0000


				1/4"	82°	Undercut	0.237"	0.053"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A464	0000
				5/16"	82°	Standard	0.237"	0.075"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A125	0000
				3/8"	82°	Standard	0.237"	0.075"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A126	0000
				3/8"	82°	Undercut	0.237"	0.053"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A465	0000
				1/2"	82°	Standard	0.237"	0.075"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A128	0000
				1/2"	82°	Undercut	0.237"	0.053"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A466	0000
				5/8"	82°	Standard	0.237"	0.075"	Fully Threaded	70,000	ASME B18.6.3	—	—	50	91771A852	0000
				3/4"	82°	Standard	0.237"	0.075"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A129	0000
				1"	82°	Standard	0.237"	0.075"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A133	0000




						6-32

						3/16"	82°	Undercut	0.262"	0.059"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A201	0000


						3/16"	82°	Undercut	0.279"	0.059"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-25	—	25	96877A301	0000
						3/16"	100°	Standard	0.262"	0.06"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A939	0000
						3/16"	100°	Standard	0.279"	0.06"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C23, NASM24693	Material Certificate	100	93085A143	00000
						3/16"	100°	Undercut	0.262"	0.059"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	50	91771A976	0000
						1/4"	82°	Standard	0.262"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A144	0000
						1/4"	82°	Standard	0.279"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-26	Material Certificate	50	96877A305	0000
						1/4"	82°	Undercut	0.262"	0.059"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91099A205	0000
						1/4"	100°	Standard	0.262"	0.06"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A940	00000
						1/4"	100°	Standard	0.279"	0.06"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C24, NASM24693	Material Certificate	100	93085A144	00000
						1/4"	100°	Undercut	0.262"	0.059"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A977	00000


						5/16"	82°	Standard	0.262"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A145	0000
						5/16"	82°	Standard	0.279"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-27	—	50	96877A310	00000
						5/16"	82°	Undercut	0.262"	0.059"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A210	0000
						5/16"	100°	Standard	0.262"	0.06"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A941	0000
						5/16"	100°	Standard	0.279"	0.06"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C25, NASM24693	—	100	93085A145	00000
						3/8"	82°	Standard	0.262"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A146	0000
						3/8"	82°	Standard	0.279"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-28	Material Certificate	50	96877A315	00000
						3/8"	82°	Undercut	0.262"	0.059"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91099A215	0000
						3/8"	100°	Standard	0.262"	0.06"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A942	00000
						3/8"	100°	Standard	0.279"	0.06"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C26, NASM24693	—	100	93085A146	00000


						3/8"	100°	Undercut	0.262"	0.059"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A978	0000
						7/16"	82°	Standard	0.262"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A142	0000
7/16"						82°	Standard	0.279"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-29	—	50	96877A304	0000
7/16"	82°					Undercut	0.262"	0.059"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A218	0000
7/16"	100°					Standard	0.262"	0.06"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A943	00000
7/16"	100°					Standard	0.279"	0.06"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C27, NASM24693	—	50	93085A147	00000
1/2"	82°					Standard	0.262"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A148	0000
1/2"	82°					Standard	0.279"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-30	Material Certificate	50	96877A320	00000
1/2"	82°					Undercut	0.262"	0.059"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91099A220	0000
1/2"	100°					Standard	0.262"	0.06"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A944	00000


1/2"	100°					Standard	0.279"	0.06"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C28, NASM24693	—	50	93085A148	00000
9/16"	82°					Standard	0.262"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A169	0000
5/8"	82°					Standard	0.262"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A150	0000
5/8"	82°	Standard				0.279"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-31	Material Certificate	50	96877A323	00000
5/8"	82°	Undercut	0.262"			0.059"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A222	0000
5/8"	100°	Standard	0.279"			0.06"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C29, NASM24693	Material Certificate	50	93085A150	00000
3/4"	82°	Standard	0.262"			0.083"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A151	0000
3/4"	82°	Standard	0.279"			0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-32	Material Certificate	50	96877A330	00000
3/4"	82°	Undercut	0.262"			0.059"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A224	0000
3/4"	100°	Standard	0.279"			0.06"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C30, NASM24693	—	50	93085A151	00000


7/8"	82°	Standard	0.262"			0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A152	00000
7/8"	82°	Standard	0.279"			0.081"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-33	—	50	96877A714	00000
7/8"	82°	Undercut	0.262"			0.059"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A467	0000
7/8"	100°	Standard	0.279"			0.06"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C31, NASM24693	Material Certificate	50	93085A152	00000
1"	82°	Standard	0.262"			0.083"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A153	00000
1"	82°	Standard	0.279"			0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-34	—	25	96877A626	00000
1"	82°	Undercut	0.262"			0.059"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A228	0000
1"	100°	Standard	0.279"			0.06"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C32, NASM24693	—	25	93085A154	0000
1 1/8"	82°	Standard	0.262"			0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A154	0000
1 1/8"	100°	Standard	0.279"	0.06"		Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C33, NASM24693	—	25	93085A155	0000
1 1/4"	82°	Standard	0.262"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A155	00000
1 1/4"	82°	Standard	0.279"	0.081"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-35	—	25	96877A715	00000
1 1/4"	100°	Standard	0.279"	0.06"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C34, NASM24693	—	25	93085A157	00000
1 1/2"	82°	Standard	0.262"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A157	00000
1 1/2"	82°	Standard	0.279"	0.081"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-36	Material Certificate	25	96877A716	00000
1 1/2"	100°	Standard	0.279"	0.06"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C36, NASM24693	Material Certificate	10	93085A159	0000
1 3/4"	82°	Standard	0.262"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A156	00000
1 3/4"	82°	Standard	0.279"	0.081"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-37	—	25	96877A717	00000
1 7/8"	82°	Standard	0.262"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A158	0000
2"	82°	Standard	0.262"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A159	00000
2"	100°	Standard	0.279"	0.06"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C40, NASM24693	—	10	93085A163	0000
2 1/4"	82°	Standard	0.262"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A160	0000
2 1/2"	82°	Standard	0.262"	0.083"	Partially Threaded	80,000	ASME B18.6.3	—	—	50	91771A161	0000
2 1/2"	100°	Standard	0.279"	0.06"	Partially Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C42, NASM24693	—	10	96877A752	00000
2 3/4"	82°	Standard	0.262"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A162	0000
3"	82°	Standard	0.262"	0.083"	Partially Threaded	80,000	ASME B18.6.3	—	—	50	91771A163	0000



		8-32

		3/16"	82°	Undercut	0.312"	0.07"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A189	0000


		3/16"	100°	Standard	0.312"	0.072"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A945	00000
		1/4"	82°	Undercut	0.312"	0.07"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A252	0000
		1/4"	82°	Undercut	0.332"	0.07"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-41	Material Certificate	50	96877A398	00000
		1/4"	100°	Standard	0.312"	0.072"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A946	00000
		1/4"	100°	Standard	0.332"	0.072"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C46, NASM24693	Material Certificate	50	93085A190	00000
		5/16"	82°	Standard	0.312"	0.1"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A191	0000
		5/16"	82°	Standard	0.332"	0.1"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-42	—	50	96877A401	0000
		5/16"	82°	Undercut	0.312"	0.07"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A255	0000
		5/16"	100°	Standard	0.312"	0.072"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A947	00000
		5/16"	100°	Standard	0.332"	0.072"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C47, NASM24693	—	50	93085A191	00000


		3/8"	82°	Standard	0.312"	0.1"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A192	0000
		3/8"	82°	Standard	0.332"	0.1"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-43	—	50	96877A405	00000
		3/8"	82°	Undercut	0.312"	0.07"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A260	0000
		3/8"	100°	Standard	0.312"	0.072"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A948	00000
		3/8"	100°	Standard	0.332"	0.072"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C48, NASM24693	Material Certificate	50	93085A192	00000
		7/16"	82°	Standard	0.312"	0.1"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A195	0000
		7/16"	82°	Standard	0.332"	0.1"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-44	—	50	96877A408	00000
		7/16"	82°	Undercut	0.312"	0.07"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A263	0000
		7/16"	100°	Standard	0.312"	0.072"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A949	0000
		7/16"	100°	Standard	0.332"	0.072"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C49, NASM24693	—	50	93085A193	0000


		1/2"	82°	Standard	0.312"	0.1"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A194	00000
		1/2"	82°	Standard	0.332"	0.1"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-45	—	50	96877A411	00000
		1/2"	82°	Undercut	0.312"	0.07"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A265	0000
		1/2"	100°	Standard	0.312"	0.072"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A950	0000
		1/2"	100°	Standard	0.332"	0.072"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C50, NASM24693	—	50	93085A194	00000
		5/8"	82°	Standard	0.312"	0.1"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A196	00000
		5/8"	82°	Standard	0.332"	0.1"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-46	—	50	96877A413	00000
		5/8"	82°	Undercut	0.312"	0.07"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A266	0000
		5/8"	100°	Standard	0.312"	0.072"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A951	0000
		5/8"	100°	Standard	0.332"	0.072"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C51, NASM24693	Material Certificate	50	93085A196	00000


		3/4"	82°	Standard	0.312"	0.1"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A197	00000
		3/4"	82°	Standard	0.332"	0.1"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-47	Material Certificate	25	96877A418	00000
		3/4"	82°	Undercut	0.312"	0.07"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A268	00000
		3/4"	100°	Standard	0.312"	0.072"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	50	91771A952	0000
		3/4"	100°	Standard	0.332"	0.072"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C52, NASM24693	—	50	93085A197	00000
		7/8"	82°	Standard	0.312"	0.1"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A198	00000
		7/8"	82°	Standard	0.332"	0.1"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-48	Material Certificate	25	96877A719	00000
		7/8"	82°	Undercut	0.312"	0.07"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A468	00000
		7/8"	100°	Standard	0.312"	0.072"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A953	0000
		7/8"	100°	Standard	0.332"	0.072"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C53, NASM24693	—	25	93085A198	0000


		1"	82°	Standard	0.312"	0.1"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A199	00000
		1"	82°	Standard	0.332"	0.1"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-49	—	25	96877A627	00000
		1"	82°	Undercut	0.312"	0.07"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A270	00000
		1"	100°	Standard	0.312"	0.072"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A954	00000
		1"	100°	Standard	0.332"	0.072"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C54, NASM24693	—	25	93085A199	00000
		1 1/8"	82°	Standard	0.312"	0.1"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A200	00000
		1 1/8"	100°	Standard	0.332"	0.072"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C55, NASM24693	Material Certificate	25	93085A201	00000
		1 1/4"	82°	Standard	0.312"	0.1"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A201	00000
		1 1/4"	82°	Standard	0.332"	0.1"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-50	—	25	96877A628	00000
1 1/4"		100°	Standard	0.332"	0.072"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C56, NASM24693	—	25	93085A203	00000
1 1/2"	82°	Standard	0.312"	0.1"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	50	91771A203	00000
1 1/2"	82°	Standard	0.332"	0.1"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-51	—	25	96877A629	00000
1 1/2"	100°	Standard	0.332"	0.072"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C58, NASM24693	Material Certificate	10	93085A205	0000
1 3/4"	82°	Standard	0.312"	0.1"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A204	0000
1 3/4"	82°	Standard	0.332"	0.1"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-52	—	10	96877A721	0000
1 3/4"	100°	Standard	0.332"	0.072"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C60, NASM24693	Material Certificate	10	93085A853	0000
2"	82°	Standard	0.312"	0.1"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	50	91771A205	00000
2"	82°	Standard	0.332"	0.1"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-53	—	10	96877A722	0000
2"	100°	Standard	0.332"	0.072"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C62, NASM24693	—	10	93085A854	0000
2 1/4"	82°	Standard	0.312"	0.1"	Partially Threaded	80,000	ASME B18.6.3	—	—	50	91771A206	00000
2 1/4"	82°	Standard	0.332"	0.1"	Partially Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-54	Material Certificate	10	96877A723	00000
2 1/2"	82°	Standard	0.312"	0.1"	Partially Threaded	80,000	ASME B18.6.3	—	—	50	91771A207	00000
2 1/2"	82°	Standard	0.332"	0.1"	Partially Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-55	—	10	96877A724	00000
2 1/2"	100°	Standard	0.332"	0.072"	Partially Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C64, NASM24693	Material Certificate	10	96877A753	0000
2 3/4"	82°	Standard	0.312"	0.1"	Partially Threaded	80,000	ASME B18.6.3	—	—	50	91771A208	00000
3"	82°	Standard	0.312"	0.1"	Partially Threaded	80,000	ASME B18.6.3	—	—	50	91771A209	00000
3 1/2"	82°	Standard	0.312"	0.1"	Partially Threaded	80,000	ASME B18.6.3	—	—	10	91771A211	0000
4"	82°	Standard	0.312"	0.1"	Partially Threaded	80,000	ASME B18.6.3	—	—	10	91771A213	0000



		8-36

		1/4"	82°	Standard	0.312"	0.1"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A187	00000


		3/8"	82°	Standard	0.312"	0.1"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A188	00000




				10-24

				1/4"	82°	Undercut	0.362"	0.081"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A238	00000


				5/16"	82°	Undercut	0.362"	0.081"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A239	00000
				5/16"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C69, NASM24693	—	50	96877A754	00000
				3/8"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A240	00000
				3/8"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-61	—	25	96877A500	00000
				3/8"	82°	Undercut	0.362"	0.081"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A315	00000
				3/8"	100°	Standard	0.362"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A955	0000
				3/8"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C70, NASM24693	—	25	93085A239	00000
				7/16"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A241	00000
				7/16"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-62	—	25	96877A725	00000
				7/16"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C71, NASM24693	—	25	96877A755	0000


				1/2"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A242	00000
				1/2"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-63	—	25	96877A510	00000
				1/2"	82°	Undercut	0.362"	0.081"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91099A320	00000
				1/2"	100°	Standard	0.362"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A956	00000
				1/2"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C72, NASM24693	—	25	93085A242	00000
				5/8"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A244	00000
				5/8"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-64	—	25	96877A515	00000
				5/8"	82°	Undercut	0.362"	0.081"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A469	00000
				5/8"	100°	Standard	0.362"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A957	0000
				5/8"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C73, NASM24693	—	25	93085A244	0000


				3/4"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A245	00000
				3/4"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-65	—	25	96877A520	00000
				3/4"	82°	Undercut	0.362"	0.081"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A325	00000
				3/4"	100°	Standard	0.362"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A958	0000
				3/4"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C74, NASM24693	—	10	93085A245	0000
				7/8"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A246	00000
				7/8"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-66	Material Certificate	25	96877A726	00000
				7/8"	100°	Standard	0.362"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A959	0000
				1"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	50	91771A247	0000
				1"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-67	—	25	96877A631	00000


				1"	82°	Undercut	0.362"	0.081"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91099A329	0000
				1"	100°	Standard	0.362"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A960	00000
				1"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	—	MS24693-C76, NASM24693	—	25	93085A843	00000
				1 1/8"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A248	0000
				1 1/4"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A249	00000
				1 1/4"	82°	Undercut	0.362"	0.081"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91099A471	0000
				1 1/4"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C78, NASM24693	—	10	96877A757	0000
				1 3/8"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A250	00000
				1 1/2"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A251	00000
				1 1/2"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C80, NASM24693	—	10	96877A758	0000


1 3/4"	82°			Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A254	00000
2"	82°			Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A253	00000
2"	100°			Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C84, NASM24693	—	10	96877A759	0000
2 1/4"	82°			Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	91771A255	0000
2 1/2"	82°			Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	91771A256	00000
2 3/4"	82°			Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	91771A260	0000
3"	82°			Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	91771A257	00000
3 1/2"	82°			Standard	0.362"	0.116"	Partially Threaded	80,000	ASME B18.6.3	—	—	10	91771A259	0000
4"	82°			Standard	0.362"	0.116"	Partially Threaded	80,000	ASME B18.6.3	—	—	10	91771A261	0000
5"	82°	Standard		0.362"	0.116"	Partially Threaded	80,000	ASME B18.6.3	—	—	10	91771A263	0000
6"	82°	Standard	0.362"	0.116"	Partially Threaded	80,000	ASME B18.6.3	—	—	5	91771A265	0000



		10-32

		1/4"	82°	Undercut	0.362"	0.081"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A825	00000


		1/4"	82°	Undercut	0.385"	0.081"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51960-61	—	10	96877A084	0000
		1/4"	100°	Standard	0.362"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A961	0000
		1/4"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C268, NASM24693	—	25	93085A825	0000
		5/16"	82°	Undercut	0.362"	0.081"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A340	0000
		5/16"	82°	Undercut	0.385"	0.116"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51960-62	—	10	96877A087	0000
		5/16"	100°	Standard	0.362"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A962	00000
		5/16"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C269, NASM24693	—	25	93085A823	0000
		3/8"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A827	00000
		3/8"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51960-63	—	25	96877A091	0000
		3/8"	82°	Undercut	0.362"	0.081"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A355	00000


		3/8"	100°	Standard	0.362"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	50	91771A963	0000
		3/8"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C270, NASM24693	—	50	93085A827	00000
		7/16"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A847	00000
		7/16"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51960-64	Material Certificate	10	96877A092	0000
		7/16"	82°	Undercut	0.362"	0.081"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91099A472	00000
		7/16"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C271, NASM24693	—	50	93085A828	00000
		1/2"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A829	00000
		1/2"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51960-65	Material Certificate	25	96877A093	0000
		1/2"	82°	Undercut	0.362"	0.081"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A360	00000
		1/2"	100°	Standard	0.362"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A964	00000


		1/2"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C272, NASM24693	—	25	93085A829	00000
		9/16"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A800	00000
		5/8"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A830	00000
		5/8"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51960-66	Material Certificate	25	96877A096	00000
		5/8"	82°	Undercut	0.362"	0.081"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91099A362	00000
		5/8"	100°	Standard	0.362"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A965	00000
		5/8"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C273, NASM24693	—	25	93085A830	00000
		3/4"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91771A831	00000
		3/4"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51960-67	Material Certificate	25	96877A098	00000
		3/4"	82°	Undercut	0.362"	0.081"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91099A365	00000


		3/4"	100°	Standard	0.362"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	50	91771A966	00000
		3/4"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C274, NASM24693	—	25	93085A831	00000
		7/8"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A832	00000
		7/8"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51960-68	—	10	96877A100	0000
		7/8"	82°	Undercut	0.362"	0.081"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91099A473	0000
		7/8"	100°	Standard	0.362"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	91771A967	0000
		7/8"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C275, NASM24693	Material Certificate	25	93085A832	00000
		1"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A833	00000
		1"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51960-69	Material Certificate	10	96877A105	0000
		1"	82°	Undercut	0.362"	0.081"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91099A367	00000


		1"	100°	Standard	0.362"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	91771A968	0000
		1"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C276, NASM24693	Material Certificate	25	93085A833	00000
		1 1/8"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A834	0000
		1 1/8"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C277, NASM24693	Material Certificate	10	96877A761	0000
		1 1/4"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A835	00000
		1 1/4"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51960-70	—	25	96877A632	00000
		1 1/4"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C278, NASM24693	Material Certificate	10	93085A835	0000
		1 3/8"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C279, NASM24693	Material Certificate	10	96877A762	0000
		1 1/2"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	50	91771A836	00000
1 1/2"		82°	Standard	0.385"	0.116"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51960-71	—	10	96877A633	0000
1 1/2"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C280, NASM24693	Material Certificate	10	93085A837	0000
1 5/8"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C281, NASM24693	Material Certificate	10	96877A763	0000
1 3/4"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A837	00000
1 3/4"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C282, NASM24693	—	10	93085A855	00000
1 7/8"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C283, NASM24693	—	10	96877A764	00000
2"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	50	91771A838	00000
2"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51960-73	—	10	96877A736	00000
2"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C284, NASM24693	—	10	93085A856	0000
2 1/4"	82°	Standard	0.362"	0.116"	Partially Threaded	80,000	ASME B18.6.3	—	Material Certificate	50	91771A839	00000
2 1/4"	82°	Standard	0.385"	0.116"	Partially Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51960-74	—	10	96877A737	00000
2 1/4"	100°	Standard	0.385"	0.083"	Partially Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C285, NASM24693	Material Certificate	10	96877A765	00000
2 1/2"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	91771A840	00000
2 1/2"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C286, NASM24693	Material Certificate	10	93085A857	00000
2 3/4"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	91771A841	00000
3"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	91771A842	00000
3 1/2"	82°	Standard	0.362"	0.116"	Partially Threaded	80,000	ASME B18.6.3	—	—	10	91771A844	0000
4"	82°	Standard	0.362"	0.116"	Partially Threaded	80,000	ASME B18.6.3	—	—	10	91771A846	0000



		12-24

		3/8"	82°	Standard	0.412"	0.132"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A881	00000


		3/8"	82°	Undercut	0.412"	0.092"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A289	0000
		1/2"	82°	Standard	0.412"	0.132"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A291	00000
		1/2"	82°	Undercut	0.412"	0.092"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	91099A415	00000
		5/8"	82°	Standard	0.412"	0.132"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A293	00000
		5/8"	82°	Undercut	0.412"	0.092"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91099A474	0000
		3/4"	82°	Standard	0.412"	0.132"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A294	00000
		3/4"	82°	Undercut	0.412"	0.092"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91099A420	0000
		7/8"	82°	Standard	0.412"	0.132"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A295	0000
		1"	82°	Standard	0.412"	0.132"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A296	00000
		1"	82°	Undercut	0.412"	0.092"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91099A425	00000


		1 1/4"	82°	Standard	0.412"	0.132"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A298	00000
		1 1/4"	82°	Undercut	0.412"	0.092"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91099A475	00000
		1 1/2"	82°	Standard	0.412"	0.132"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	50	91771A299	00000
		1 1/2"	82°	Undercut	0.412"	0.092"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	91099A476	0000
		2"	82°	Standard	0.412"	0.132"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	91771A301	0000
		3"	82°	Standard	0.412"	0.132"	Partially Threaded	80,000	ASME B18.6.3	—	—	25	91771A305	00000
		4"	82°	Standard	0.412"	0.132"	Partially Threaded	80,000	ASME B18.6.3	—	—	10	91771A309	0000




				1/4"-20

				3/8"	82°	Undercut	0.477"	0.107"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A535	00000


				3/8"	82°	Undercut	0.507"	0.107"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-77	Material Certificate	10	96877A727	00000
				3/8"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	—	MS24693-C92, NASM24693	—	25	93085A844	00000
				7/16"	82°	Undercut	0.477"	0.107"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	91771A853	00000
				7/16"	82°	Undercut	0.507"	0.107"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-78	—	10	96877A728	00000
				7/16"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C93, NASM24693	—	10	96877A766	00000
				1/2"	82°	Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	50	91771A537	00000
				1/2"	82°	Standard	0.507"	0.153"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-79	—	10	96877A615	0000
				1/2"	82°	Undercut	0.477"	0.107"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	50	91099A450	0000
				1/2"	100°	Standard	0.477"	0.11"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	91771A969	0000
				1/2"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C94, NASM24693	—	10	93085A537	00000


				5/8"	82°	Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A539	0000
				5/8"	82°	Standard	0.507"	0.153"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-80	—	10	96877A617	00000
				5/8"	82°	Undercut	0.477"	0.107"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91099A477	00000
				5/8"	100°	Standard	0.477"	0.11"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	25	91771A970	00000
				5/8"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C95, NASM24693	Material Certificate	10	93085A539	00000
				3/4"	82°	Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A540	00000
				3/4"	82°	Standard	0.507"	0.153"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-81	Material Certificate	10	96877A619	00000
				3/4"	82°	Undercut	0.477"	0.107"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91099A453	00000
				3/4"	100°	Standard	0.477"	0.11"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	91771A971	00000
				3/4"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C96, NASM24693	Material Certificate	25	93085A540	00000


				7/8"	82°	Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A541	00000
				7/8"	82°	Standard	0.507"	0.153"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-82	—	10	96877A102	00000
				7/8"	82°	Undercut	0.477"	0.107"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91099A478	00000
				7/8"	100°	Standard	0.477"	0.11"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	91771A972	00000
				1"	82°	Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	50	91771A542	00000
1"				82°	Standard	0.507"	0.153"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-83	—	10	96877A624	00000
1"	82°			Undercut	0.477"	0.107"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	25	91099A456	0000
1"	100°			Standard	0.477"	0.11"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	91771A973	00000
1"	100°			Standard	0.507"	0.11"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C98, NASM24693	Material Certificate	10	93085A542	0000
1 1/8"	82°			Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A543	00000


1 1/8"	100°			Standard	0.507"	0.11"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C99, NASM24693	—	10	96877A767	00000
1 1/4"	82°			Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	25	91771A544	00000
1 1/4"	82°			Standard	0.507"	0.153"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-84	—	10	96877A634	0000
1 1/4"	82°			Undercut	0.477"	0.107"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	91099A479	0000
1 1/4"	100°			Standard	0.507"	0.11"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C100, NASM24693	—	10	93085A544	00000
1 3/8"	82°			Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	91771A854	0000
1 1/2"	82°			Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	91771A546	00000
1 1/2"	82°			Standard	0.507"	0.153"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-85	—	10	96877A635	00000
1 1/2"	82°			Undercut	0.477"	0.107"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	91099A481	0000
1 1/2"	100°			Standard	0.507"	0.11"	Fully Threaded	70,000	—	MS24693-C102, NASM24693	—	10	93085A845	00000


1 5/8"	82°			Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	10	91771A882	0000
1 3/4"	82°			Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	91771A548	0000
1 3/4"	82°			Standard	0.507"	0.153"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-86	—	5	96877A729	0000
1 3/4"	100°			Standard	0.507"	0.11"	Fully Threaded	70,000	—	MS24693-C104, NASM24693	Material Certificate	10	93085A846	00000
2"	82°			Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	25	91771A550	00000
2"	82°			Standard	0.507"	0.153"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-87	Material Certificate	5	96877A731	00000
2"	100°			Standard	0.507"	0.11"	Fully Threaded	70,000	—	MS24693-C106, NASM24693	Material Certificate	10	93085A847	00000
2 1/4"	82°			Standard	0.477"	0.153"	Partially Threaded	80,000	ASME B18.6.3	—	—	25	91771A551	00000
2 1/2"	82°			Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	25	91771A552	00000
2 1/2"	82°	Standard		0.507"	0.153"	Partially Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-89	—	5	96877A732	00000
2 3/4"	82°	Standard	0.477"	0.153"	Partially Threaded	80,000	ASME B18.6.3	—	—	10	91771A553	0000
3"	82°	Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	10	91771A554	0000
3 1/2"	82°	Standard	0.477"	0.153"	Partially Threaded	80,000	ASME B18.6.3	—	—	10	91771A571	0000
4"	82°	Standard	0.477"	0.153"	Partially Threaded	80,000	ASME B18.6.3	—	—	10	91771A573	0000
4 1/2"	82°	Standard	0.477"	0.153"	Partially Threaded	80,000	ASME B18.6.3	—	—	10	91771A574	00000
5"	82°	Standard	0.477"	0.153"	Partially Threaded	80,000	ASME B18.6.3	—	—	5	91771A576	0000
5 1/2"	82°	Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	5	91771A572	0000
6"	82°	Standard	0.477"	0.153"	Partially Threaded	80,000	ASME B18.6.3	—	—	5	91771A577	0000



		1/4"-28

		3/8"	82°	Undercut	0.477"	0.107"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A555	0000


		3/8"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	—	MS24693-C292, NASM24693	Material Certificate	25	93085A848	00000
		7/16"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C293, NASM24693	Material Certificate	10	96877A768	0000
		1/2"	82°	Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A557	0000
		1/2"	82°	Standard	0.507"	0.153"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51960-82	—	10	96877A739	00000
		1/2"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C294, NASM24693	—	10	93085A557	0000
		5/8"	82°	Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	91771A558	00000
		5/8"	82°	Standard	0.507"	0.153"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51960-83	—	10	96877A741	00000
		5/8"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C295, NASM24693	—	10	93085A558	0000
		3/4"	82°	Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	91771A559	0000
		3/4"	82°	Standard	0.507"	0.153"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51960-84	Material Certificate	5	96877A742	0000


		3/4"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C296, NASM24693	—	10	93085A559	00000
		7/8"	82°	Standard	0.507"	0.153"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51960-85	Material Certificate	5	96877A743	0000
		7/8"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C297, NASM24693	—	10	93085A560	00000
		1"	82°	Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	91771A561	0000
		1"	82°	Standard	0.507"	0.153"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51960-86	—	5	96877A744	00000
		1"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C298, NASM24693	—	10	93085A561	00000
		1 1/8"	82°	Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	91771A562	0000
		1 1/8"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C299, NASM24693	—	10	96877A769	00000
		1 1/4"	82°	Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	91771A563	0000
		1 1/4"	82°	Standard	0.507"	0.153"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51960-87	—	5	96877A745	00000


		1 1/4"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C300, NASM24693	Material Certificate	10	93085A563	00000
		1 1/2"	82°	Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	91771A564	0000
		1 1/2"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	—	MS24693-C302, NASM24693	—	10	93085A849	00000
		1 5/8"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C303, NASM24693	—	5	96877A771	00000
		1 3/4"	82°	Standard	0.507"	0.153"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51960-89	—	5	96877A747	00000
		1 3/4"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C304, NASM24693	Material Certificate	5	96877A772	00000
		1 7/8"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C305, NASM24693	Material Certificate	1	96877A773	0000
		2"	82°	Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	91771A566	00000
		2"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-C306, NASM24693	—	1	96877A774	0000




				5/16"-18

				1/2"	82°	Undercut	0.597"	0.134"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	91771A578	0000


				5/8"	82°	Standard	0.597"	0.191"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	91771A580	0000
				3/4"	82°	Standard	0.597"	0.191"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	91771A581	0000
				3/4"	82°	Undercut	0.597"	0.134"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	91099A482	0000
				7/8"	82°	Standard	0.597"	0.191"	Fully Threaded	80,000	ASME B18.6.3	—	—	10	91771A582	0000
				1"	82°	Standard	0.597"	0.191"	Fully Threaded	80,000	ASME B18.6.3	—	—	10	91771A583	0000
				1"	82°	Undercut	0.597"	0.134"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	25	91099A483	00000
				1 1/4"	82°	Standard	0.597"	0.191"	Fully Threaded	80,000	ASME B18.6.3	—	—	10	91771A585	0000
				1 1/2"	82°	Standard	0.597"	0.191"	Fully Threaded	80,000	ASME B18.6.3	—	—	10	91771A587	0000
				1 3/4"	82°	Standard	0.597"	0.191"	Fully Threaded	80,000	ASME B18.6.3	—	—	10	91771A589	0000
				2"	82°	Standard	0.597"	0.191"	Fully Threaded	80,000	ASME B18.6.3	—	—	10	91771A591	0000


				2 1/4"	82°	Standard	0.597"	0.191"	Partially Threaded	80,000	ASME B18.6.3	—	—	10	91771A592	0000
				2 1/2"	82°	Standard	0.597"	0.191"	Partially Threaded	80,000	ASME B18.6.3	—	—	10	91771A593	0000
				3"	82°	Standard	0.597"	0.191"	Partially Threaded	80,000	ASME B18.6.3	—	—	10	91771A595	0000
3 1/2"				82°	Standard	0.597"	0.191"	Partially Threaded	80,000	ASME B18.6.3	—	—	5	91771A597	0000
4"	82°			Standard	0.597"	0.191"	Partially Threaded	80,000	ASME B18.6.3	—	—	5	91771A599	0000
4 1/2"	82°			Standard	0.597"	0.191"	Fully Threaded	80,000	ASME B18.6.3	—	—	5	91771A911	00000
5"	82°			Standard	0.597"	0.191"	Partially Threaded	80,000	ASME B18.6.3	—	—	5	91771A602	0000
6"	82°			Standard	0.597"	0.191"	Fully Threaded	80,000	ASME B18.6.3	—	—	5	91771A912	00000




				3/8"-16

				1/2"	82°	Undercut	0.717"	0.161"	Fully Threaded	80,000	ASME B18.6.3	—	—	10	91771A619	0000


				5/8"	82°	Standard	0.717"	0.23"	Fully Threaded	80,000	ASME B18.6.3	—	—	10	91771A620	0000
				3/4"	82°	Standard	0.717"	0.23"	Fully Threaded	80,000	ASME B18.6.3	—	—	10	91771A622	0000
				3/4"	82°	Undercut	0.717"	0.161"	Fully Threaded	80,000	ASME B18.6.3	—	—	10	91771A897	00000
				1"	82°	Standard	0.717"	0.23"	Fully Threaded	80,000	ASME B18.6.3	—	—	10	91771A624	0000
				1"	82°	Standard	0.762"	0.23"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-111	—	5	96877A636	00000
				1"	82°	Undercut	0.717"	0.161"	Fully Threaded	80,000	ASME B18.6.3	—	—	5	91771A898	0000
				1 1/4"	82°	Standard	0.717"	0.23"	Fully Threaded	80,000	ASME B18.6.3	—	—	10	91771A626	0000
				1 1/4"	82°	Standard	0.762"	0.23"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-112	—	5	96877A637	00000
				1 1/2"	82°	Standard	0.717"	0.23"	Fully Threaded	80,000	ASME B18.6.3	—	—	10	91771A628	0000
				1 1/2"	82°	Standard	0.762"	0.23"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS51959-113	—	5	96877A638	0000


				1 3/4"	82°	Standard	0.717"	0.23"	Fully Threaded	80,000	ASME B18.6.3	—	—	10	91771A630	0000
				2"	82°	Standard	0.717"	0.23"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	10	91771A632	0000
				2 1/2"	82°	Standard	0.717"	0.23"	Partially Threaded	80,000	ASME B18.6.3	—	—	5	91771A634	0000
				2 3/4"	82°	Standard	0.717"	0.23"	Partially Threaded	80,000	ASME B18.6.3	—	—	5	91771A635	0000
				3"	82°	Standard	0.717"	0.23"	Partially Threaded	80,000	ASME B18.6.3	—	—	5	91771A636	0000
				3 1/2"	82°	Standard	0.717"	0.23"	Partially Threaded	80,000	ASME B18.6.3	—	—	5	91771A638	0000
				4"	82°	Standard	0.717"	0.23"	Partially Threaded	80,000	ASME B18.6.3	—	—	5	91771A640	0000
				4 1/2"	82°	Standard	0.717"	0.23"	Partially Threaded	80,000	ASME B18.6.3	—	—	5	91771A642	0000
				5"	82°	Standard	0.717"	0.23"	Partially Threaded	80,000	ASME B18.6.3	—	—	1	91771A644	0000
				6"	82°	Standard	0.717"	0.23"	Partially Threaded	80,000	ASME B18.6.3	—	—	1	91771A648	0000




						1/2"-13

		3/4"				82°	Standard	0.815"	0.223"	Fully Threaded	80,000	ASME B18.6.3	—	—	5	91771A855	0000


		1"	82°			Standard	0.815"	0.223"	Fully Threaded	80,000	ASME B18.6.3	—	—	5	91771A856	0000
		1 1/4"	82°			Standard	0.815"	0.223"	Fully Threaded	80,000	ASME B18.6.3	—	—	5	91771A857	0000
		1 1/2"	82°			Standard	0.815"	0.223"	Fully Threaded	80,000	ASME B18.6.3	—	—	5	91771A858	0000
		2"	82°			Standard	0.815"	0.223"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	5	91771A859	0000
		3"	82°			Standard	0.815"	0.223"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	1	91771A861	0000
		4"	82°			Standard	0.815"	0.223"	Fully Threaded	80,000	ASME B18.6.3	—	—	1	91771A862	0000




						M1.6 × 0.35 mm

						3 mm	90°	Standard	3 mm	0.96 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A778	0000


						4 mm	90°	Standard	3 mm	0.96 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	100	92010A779	00000
						5 mm	90°	Standard	3 mm	0.96 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A781	00000
						6 mm	90°	Standard	3 mm	0.96 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A782	00000
						8 mm	90°	Standard	3 mm	0.96 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A783	00000
						10 mm	90°	Standard	3 mm	0.96 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A811	00000
						12 mm	90°	Standard	3 mm	0.96 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A812	00000
						14 mm	90°	Standard	3 mm	0.96 mm	Fully Threaded	70,000	DIN 965	—	—	25	92010A813	0000
						16 mm	90°	Standard	3 mm	0.96 mm	Fully Threaded	70,000	DIN 965	—	—	25	92010A814	0000
						18 mm	90°	Standard	3 mm	0.96 mm	Fully Threaded	70,000	DIN 965	—	—	25	92010A815	0000
						20 mm	90°	Standard	3 mm	0.96 mm	Fully Threaded	70,000	DIN 965	—	—	25	92010A816	00000




						M2 × 0.4 mm

						3 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A784	0000


						4 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	100	92010A001	0000
						5 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	100	92010A002	0000
						6 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	100	92010A003	0000
						8 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	100	92010A004	0000
						10 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	100	92010A005	0000
						12 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A006	0000
						14 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A802	0000
						16 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A008	0000
						18 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A835	0000
						20 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A010	0000


						25 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	70,000	DIN 965	—	—	50	92010A111	0000




								M2.5 × 0.45 mm

								4 mm	90°	Standard	4.7 mm	1.5 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A012	0000


								5 mm	90°	Standard	4.7 mm	1.5 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A014	0000
				6 mm				90°	Standard	4.7 mm	1.5 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A016	0000
				8 mm	90°			Standard	4.7 mm	1.5 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A018	0000
				10 mm	90°			Standard	4.7 mm	1.5 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	100	92010A020	0000
				12 mm	90°			Standard	4.7 mm	1.5 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A022	0000
				14 mm	90°			Standard	4.7 mm	1.5 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A785	0000
				16 mm	90°			Standard	4.7 mm	1.5 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A024	0000
				20 mm	90°			Standard	4.7 mm	1.5 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A026	0000
				25 mm	90°			Standard	4.7 mm	1.5 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A786	0000
				30 mm	90°			Standard	4.7 mm	1.5 mm	Fully Threaded	Not Rated	DIN 965	—	—	50	92010A773	0000




								M2.6 × 0.45 mm

		5 mm						90°	Standard	4.7 mm	1.5 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A774	00000


		6 mm	90°					Standard	4.7 mm	1.5 mm	Fully Threaded	Not Rated	DIN 965	—	—	100	92010A775	00000
		8 mm	90°					Standard	4.7 mm	1.5 mm	Fully Threaded	Not Rated	DIN 965	—	—	100	92010A776	00000
		10 mm	90°					Standard	4.7 mm	1.5 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A777	00000




								M3 × 0.5 mm

								4 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	100	92010A112	0000


								5 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A114	0000
								6 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	100	92010A116	0000
								8 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	100	92010A118	0000
								10 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A120	0000
12 mm								90°	Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A122	0000
14 mm	90°							Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A787	0000
16 mm	90°							Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A126	0000
18 mm	90°							Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A788	0000
20 mm	90°							Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A128	0000
22 mm	90°							Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A851	0000


25 mm	90°							Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A130	00000
30 mm	90°							Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A138	00000
35 mm	90°							Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	50	92010A143	00000
40 mm	90°							Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	50	92010A146	00000
50 mm	90°							Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	50	92010A797	00000
60 mm	90°							Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	25	92010A817	00000




								M3.5 × 0.6 mm

								6 mm	90°	Standard	6.5 mm	1.93 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A798	0000


						8 mm	90°	Standard	6.5 mm	1.93 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A799	0000
						10 mm	90°	Standard	6.5 mm	1.93 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A801	0000




								M4 × 0.7 mm

								5 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A212	0000


								6 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A216	0000
								8 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	100	92010A218	0000
								10 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A220	0000
								12 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	100	92010A222	00000
								14 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	100	92010A789	0000
								16 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A226	00000
								18 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A791	00000
				20 mm				90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A228	00000
				22 mm	90°			Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A852	00000
				25 mm	90°			Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A230	00000


				30 mm	90°			Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A238	00000
				35 mm	90°			Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	50	92010A240	00000
				40 mm	90°			Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	50	92010A242	00000
				45 mm	90°			Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	50	92010A244	00000
				50 mm	90°			Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	50	92010A246	00000
				55 mm	90°			Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	25	92010A818	00000
				60 mm	90°			Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	10	92010A250	0000
		70 mm		90°	Standard			7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	10	92010A819	00000
		80 mm	90°	Standard	7.5 mm			2.2 mm	Fully Threaded	70,000	DIN 965	—	—	10	92010A821	00000
		90 mm	90°	Standard	7.5 mm			2.2 mm	Fully Threaded	70,000	DIN 965	—	—	10	92010A822	00000


		100 mm	90°	Standard	7.5 mm			2.2 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	10	92010A823	00000




				M5 × 0.8 mm

				6 mm	90°			Standard	9.2 mm	2.5 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A314	00000


				8 mm	90°			Standard	9.2 mm	2.5 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A318	00000
				10 mm	90°			Standard	9.2 mm	2.5 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A320	00000
				12 mm	90°			Standard	9.2 mm	2.5 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A322	00000
				14 mm	90°			Standard	9.2 mm	2.5 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A792	00000
				16 mm	90°			Standard	9.2 mm	2.5 mm	Fully Threaded	70,000	DIN 965	—	—	50	92010A326	0000
				18 mm	90°			Standard	9.2 mm	2.5 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A793	00000
				20 mm	90°			Standard	9.2 mm	2.5 mm	Fully Threaded	70,000	DIN 965	—	—	50	92010A328	00000
				22 mm	90°			Standard	9.2 mm	2.5 mm	Fully Threaded	70,000	DIN 965	—	—	50	92010A853	0000
				25 mm	90°			Standard	9.2 mm	2.5 mm	Fully Threaded	70,000	DIN 965	—	—	50	92010A330	00000
				30 mm	90°			Standard	9.2 mm	2.5 mm	Fully Threaded	70,000	DIN 965	—	—	50	92010A332	00000


35 mm				90°	Standard			9.2 mm	2.5 mm	Fully Threaded	70,000	DIN 965	—	—	50	92010A340	00000
40 mm	90°			Standard	9.2 mm			2.5 mm	Fully Threaded	70,000	DIN 965	—	—	25	92010A342	00000
45 mm	90°			Standard	9.2 mm			2.5 mm	Fully Threaded	70,000	DIN 965	—	—	25	92010A344	00000
50 mm	90°			Standard	9.2 mm			2.5 mm	Fully Threaded	70,000	DIN 965	—	—	25	92010A346	00000
60 mm	90°			Standard	9.2 mm			2.5 mm	Fully Threaded	70,000	DIN 965	—	—	10	92010A350	0000
70 mm	90°			Standard	9.2 mm			2.5 mm	Fully Threaded	70,000	DIN 965	—	—	10	92010A355	0000
80 mm	90°			Standard	9.2 mm			2.5 mm	Fully Threaded	70,000	DIN 965	—	—	10	92010A360	00000
90 mm	90°			Standard	9.2 mm			2.5 mm	Fully Threaded	70,000	DIN 965	—	—	5	92010A824	00000
100 mm	90°			Standard	9.2 mm			2.5 mm	Fully Threaded	70,000	DIN 965	—	—	5	92010A370	0000




				M6 × 1 mm

				8 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	50	92010A416	00000


				10 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	50	92010A420	0000
				12 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	50	92010A424	0000
				14 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	100	92010A794	00000
				16 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	50	92010A426	00000
				18 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	50	92010A795	00000
				20 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	50	92010A428	00000
				22 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	50	92010A796	00000
				25 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	50	92010A430	00000
				30 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	25	92010A438	00000
				35 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	25	92010A440	00000


				40 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	25	92010A442	00000
				45 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	25	92010A444	00000
				50 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	25	92010A446	00000
				55 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	5	92010A825	0000
				60 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	10	92010A450	0000
				70 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	10	92010A458	0000
				75 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	5	92010A826	00000
				80 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	5	92010A466	0000
				85 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	5	92010A827	00000
				100 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	5	92010A482	00000




						M8 × 1.25 mm

		10 mm	90°			Standard	14.5 mm	4 mm	Fully Threaded	70,000	DIN 965	—	—	25	92010A520	00000


		12 mm	90°			Standard	14.5 mm	4 mm	Fully Threaded	70,000	DIN 965	—	—	25	92010A524	00000
		16 mm	90°			Standard	14.5 mm	4 mm	Fully Threaded	70,000	DIN 965	—	—	25	92010A526	00000
		20 mm	90°			Standard	14.5 mm	4 mm	Fully Threaded	70,000	DIN 965	—	—	25	92010A528	00000
		22 mm	90°			Standard	14.5 mm	4 mm	Fully Threaded	70,000	DIN 965	—	—	25	92010A854	00000
		25 mm	90°			Standard	14.5 mm	4 mm	Fully Threaded	70,000	DIN 965	—	—	25	92010A530	00000
		30 mm	90°			Standard	14.5 mm	4 mm	Fully Threaded	70,000	DIN 965	—	—	25	92010A538	00000
		35 mm	90°			Standard	14.5 mm	4 mm	Fully Threaded	70,000	DIN 965	—	—	10	92010A540	00000
		40 mm	90°			Standard	14.5 mm	4 mm	Fully Threaded	70,000	DIN 965	—	—	10	92010A542	0000
		45 mm	90°			Standard	14.5 mm	4 mm	Fully Threaded	70,000	DIN 965	—	—	10	92010A544	00000
		50 mm	90°			Standard	14.5 mm	4 mm	Fully Threaded	70,000	DIN 965	—	—	10	92010A546	00000


		60 mm	90°			Standard	14.5 mm	4 mm	Fully Threaded	70,000	DIN 965	—	—	5	92010A550	0000
		70 mm	90°			Standard	14.5 mm	4 mm	Fully Threaded	70,000	DIN 965	—	—	10	92010A836	0000
		80 mm	90°			Standard	14.5 mm	4 mm	Fully Threaded	70,000	DIN 965	—	—	10	92010A837	0000
		100 mm	90°			Standard	14.5 mm	4 mm	Fully Threaded	70,000	DIN 965	—	—	1	92010A828	0000
		150 mm	90°			Standard	14.5 mm	4 mm	Fully Threaded	70,000	DIN 965	—	—	1	92010A831	0000




						M10 × 1.5 mm

						16 mm	90°	Standard	18 mm	5 mm	Fully Threaded	70,000	DIN 965	—	—	5	92010A832	00000


20 mm						90°	Standard	18 mm	5 mm	Fully Threaded	70,000	DIN 965	—	—	5	92010A630	00000
25 mm	90°					Standard	18 mm	5 mm	Fully Threaded	70,000	DIN 965	—	—	5	92010A635	00000
30 mm	90°					Standard	18 mm	5 mm	Fully Threaded	70,000	DIN 965	—	—	1	92010A640	0000
35 mm	90°					Standard	18 mm	5 mm	Fully Threaded	70,000	DIN 965	—	—	1	92010A646	0000
40 mm	90°					Standard	18 mm	5 mm	Fully Threaded	70,000	DIN 965	—	—	1	92010A651	0000
45 mm	90°					Standard	18 mm	5 mm	Fully Threaded	70,000	DIN 965	—	—	1	92010A657	0000
50 mm	90°					Standard	18 mm	5 mm	Fully Threaded	70,000	DIN 965	—	—	1	92010A663	0000
60 mm	90°					Standard	18 mm	5 mm	Fully Threaded	70,000	DIN 965	—	—	1	92010A669	0000
100 mm	90°					Standard	18 mm	5 mm	Fully Threaded	70,000	DIN 965	—	—	1	92010A834	0000


Black-Oxide 18-8 Stainless Steel







								0-80

								3/32"	82°	Undercut	0.112"	0.025"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A255	00000


								1/8"	82°	Undercut	0.112"	0.025"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A002	0000
								1/8"	100°	Standard	0.112"	0.026"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A287	0000
								5/32"	100°	Standard	0.112"	0.026"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A288	0000
								3/16"	82°	Standard	0.112"	0.035"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A005	0000
								3/16"	100°	Standard	0.112"	0.026"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A289	0000
								3/16"	100°	Standard	0.119"	0.026"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-420B, NASM24693	—	25	93085A657	0000
								7/32"	82°	Standard	0.112"	0.035"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	96640A222	00000
								7/32"	100°	Standard	0.112"	0.026"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A290	0000
				1/4"				82°	Standard	0.112"	0.035"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A008	0000
				5/16"	82°			Standard	0.112"	0.035"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A223	0000


				5/16"	100°			Standard	0.112"	0.026"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A291	0000
				11/32"	82°			Standard	0.112"	0.035"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A224	0000
				3/8"	82°			Standard	0.112"	0.035"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A225	0000
				7/16"	100°			Standard	0.112"	0.026"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A293	0000
				1/2"	82°			Standard	0.112"	0.035"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A226	0000




								2-56

								1/8"	82°	Undercut	0.162"	0.036"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A019	0000


								1/8"	100°	Standard	0.172"	0.037"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-16B, NASM24693	—	25	93085A619	00000
								5/32"	82°	Standard	0.162"	0.051"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A227	0000
								5/32"	100°	Standard	0.172"	0.037"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-17B, NASM24693	—	25	93085A621	00000
								3/16"	82°	Standard	0.162"	0.051"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A021	0000
								3/16"	100°	Standard	0.162"	0.037"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A294	0000
								7/32"	82°	Standard	0.162"	0.051"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A228	00000
								1/4"	82°	Standard	0.162"	0.051"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A023	0000
								1/4"	82°	Undercut	0.162"	0.036"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A256	0000
		1/4"						100°	Standard	0.162"	0.037"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A295	0000
		5/16"	82°					Standard	0.162"	0.051"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A024	0000


		5/16"	82°					Undercut	0.162"	0.036"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A257	0000
		5/16"	100°					Standard	0.162"	0.037"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A296	0000
		3/8"	82°					Standard	0.162"	0.051"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A025	0000
		3/8"	82°					Undercut	0.162"	0.036"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A258	0000
		3/8"	100°					Standard	0.162"	0.037"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A297	0000
		7/16"	82°					Undercut	0.162"	0.036"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A259	0000
		7/16"	100°					Standard	0.162"	0.037"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A298	0000
		1/2"	82°					Standard	0.162"	0.051"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A027	0000
		1/2"	82°					Undercut	0.162"	0.036"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A260	0000
		1/2"	100°					Standard	0.162"	0.037"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A299	0000


		5/8"	82°					Standard	0.162"	0.051"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A159	0000




		4-40

		1/8"	82°					Undercut	0.212"	0.047"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A050	0000


		3/16"	82°			Undercut	0.212"	0.047"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A052	0000
		3/16"	100°			Standard	0.212"	0.049"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	96640A333	0000
		3/16"	100°			Standard	0.225"	0.049"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-1B, NASM24693	—	25	93085A611	00000
		1/4"	82°			Standard	0.212"	0.067"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	96640A054	0000
		1/4"	82°			Undercut	0.212"	0.047"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	96640A261	0000
		1/4"	100°			Standard	0.212"	0.049"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	96640A334	0000
		1/4"	100°			Standard	0.225"	0.049"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-2B, NASM24693	—	25	93085A612	0000
		5/16"	82°			Standard	0.212"	0.067"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A055	0000
		5/16"	82°			Undercut	0.212"	0.047"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A262	0000
		5/16"	100°			Standard	0.212"	0.049"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A335	0000


		5/16"	100°			Standard	0.225"	0.049"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-3B, NASM24693	—	25	93085A613	00000
		3/8"	82°			Standard	0.212"	0.067"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A056	0000
		3/8"	82°			Undercut	0.212"	0.047"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A263	0000
		3/8"	100°			Standard	0.212"	0.049"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	96640A336	0000
		3/8"	100°			Standard	0.225"	0.049"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-4B, NASM24693	—	25	93085A614	00000
		7/16"	82°			Standard	0.212"	0.067"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A057	0000
		7/16"	82°			Undercut	0.212"	0.047"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A264	0000
		7/16"	100°			Standard	0.212"	0.049"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A337	0000
		7/16"	100°			Standard	0.225"	0.049"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-5B, NASM24693	—	25	93085A615	0000
		1/2"	82°			Standard	0.212"	0.067"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A058	0000


		1/2"	82°	Undercut		0.212"	0.047"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A265	0000
		1/2"	100°	Standard	0.212"	0.049"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A338	0000
		1/2"	100°	Standard	0.225"	0.049"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-6B, NASM24693	—	25	93085A616	00000
		9/16"	82°	Standard	0.212"	0.067"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A229	0000
		5/8"	82°	Standard	0.212"	0.067"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A059	0000
		5/8"	100°	Standard	0.225"	0.049"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-7B, NASM24693	—	25	93085A617	00000
		11/16"	82°	Standard	0.212"	0.067"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A230	0000
		3/4"	82°	Standard	0.212"	0.067"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A061	0000
		3/4"	100°	Standard	0.225"	0.049"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-8B, NASM24693	Material Certificate	25	93085A618	0000
		Mil. Spec. 18-8 Stainless Steel Phillips Flat Head Screws, 100 Degree Countersink Angle, 4-40 Thread Size, 3/4" Long Product Detail QuantityPack of 25In stock Select a compatible file type: Parasolid Compatible Products for This Flat Head Screw
		7/8"	82°	Standard	0.212"	0.067"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A231	00000


		1"	82°	Standard	0.212"	0.067"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A064	00000
		1 1/4"	82°	Standard	0.212"	0.067"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A161	00000
		1 1/2"	82°	Standard	0.212"	0.067"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A162	00000




				6-32

				3/16"	82°	Undercut	0.262"	0.059"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A266	00000


				3/16"	100°	Standard	0.262"	0.06"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A339	0000
				3/16"	100°	Standard	0.279"	0.06"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-23B, NASM24693	—	25	93085A622	0000
				1/4"	82°	Standard	0.262"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A110	0000
				1/4"	82°	Undercut	0.262"	0.059"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	96640A267	0000
				1/4"	100°	Standard	0.262"	0.06"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	96640A340	0000
				1/4"	100°	Standard	0.279"	0.06"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-24B, NASM24693	—	25	93085A623	0000
				5/16"	82°	Standard	0.262"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A113	0000
				5/16"	82°	Undercut	0.262"	0.059"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A268	0000
5/16"				100°	Standard	0.262"	0.06"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A341	0000
5/16"	100°			Standard	0.279"	0.06"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-25B, NASM24693	—	25	93085A624	00000


3/8"	82°			Standard	0.262"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A115	0000
3/8"	82°			Undercut	0.262"	0.059"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	96640A269	0000
3/8"	100°			Standard	0.262"	0.06"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A342	0000
3/8"	100°			Standard	0.279"	0.06"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-26B, NASM24693	Material Certificate	25	93085A625	00000
7/16"	82°			Standard	0.262"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A163	00000
7/16"	82°			Undercut	0.262"	0.059"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A270	0000
7/16"	100°			Standard	0.262"	0.06"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A343	00000
7/16"	100°			Standard	0.279"	0.06"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-27B, NASM24693	—	25	93085A626	00000
1/2"	82°			Standard	0.262"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A117	00000
1/2"	82°			Undercut	0.262"	0.059"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A271	00000


1/2"	100°			Standard	0.262"	0.06"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A344	0000
1/2"	100°			Standard	0.279"	0.06"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-28B, NASM24693	Material Certificate	25	93085A627	0000
5/8"	82°			Standard	0.262"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A118	00000
5/8"	100°			Standard	0.279"	0.06"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-29B, NASM24693	—	25	93085A628	00000
3/4"	82°			Standard	0.262"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	96640A120	00000
3/4"	100°			Standard	0.279"	0.06"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-30B, NASM24693	—	25	93085A629	00000
7/8"	82°			Standard	0.262"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A164	00000
7/8"	100°			Standard	0.279"	0.06"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-31B, NASM24693	—	25	93085A631	00000
1"	82°			Standard	0.262"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A121	00000
1"	100°			Standard	0.279"	0.06"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-32B, NASM24693	—	25	93085A632	00000


1 1/4"	82°			Standard	0.262"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A165	0000
1 1/2"	82°			Standard	0.262"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A125	00000
1 3/4"	82°			Standard	0.262"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A232	00000
2"	82°			Standard	0.262"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A128	00000
3"	82°			Standard	0.262"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	96640A233	0000




				8-32

				3/16"	82°	Undercut	0.312"	0.07"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	96640A272	00000


				1/4"	82°	Undercut	0.312"	0.07"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A122	0000
				1/4"	100°	Standard	0.312"	0.072"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A346	00000
				1/4"	100°	Standard	0.332"	0.072"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-46B, NASM24693	—	25	93085A633	0000
				5/16"	82°	Standard	0.312"	0.1"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A166	0000
				5/16"	100°	Standard	0.312"	0.072"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A347	00000
				5/16"	100°	Standard	0.332"	0.072"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-47B, NASM24693	—	25	93085A634	00000
				3/8"	82°	Standard	0.312"	0.1"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A123	00000
		3/8"		82°	Undercut	0.312"	0.07"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	100	96640A273	00000
		3/8"	100°	Standard	0.332"	0.072"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-48B, NASM24693	—	25	93085A635	00000
		7/16"	82°	Standard	0.312"	0.1"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A167	00000


		7/16"	100°	Standard	0.312"	0.072"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A349	00000
		7/16"	100°	Standard	0.332"	0.072"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-49B, NASM24693	Material Certificate	25	93085A636	0000
		1/2"	82°	Standard	0.312"	0.1"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A126	00000
		1/2"	82°	Undercut	0.312"	0.07"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A274	00000
		1/2"	100°	Standard	0.312"	0.072"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A350	00000
		1/2"	100°	Standard	0.332"	0.072"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-50B, NASM24693	—	25	93085A637	00000
		5/8"	82°	Standard	0.312"	0.1"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A127	00000
		5/8"	100°	Standard	0.312"	0.072"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A351	0000
		5/8"	100°	Standard	0.332"	0.072"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-51B, NASM24693	—	25	93085A638	00000
		3/4"	82°	Standard	0.312"	0.1"	Fully Threaded	80,000	ASME B18.6.3	—	—	100	96640A129	00000


		3/4"	100°	Standard	0.312"	0.072"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A352	0000
		3/4"	100°	Standard	0.332"	0.072"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-52B, NASM24693	—	25	93085A639	00000
		7/8"	100°	Standard	0.312"	0.072"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A353	0000
		7/8"	100°	Standard	0.332"	0.072"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-53B, NASM24693	—	25	93085A641	00000
		1"	82°	Standard	0.312"	0.1"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A178	0000
		1"	100°	Standard	0.332"	0.072"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-54B, NASM24693	—	10	93085A642	0000
		1 1/4"	82°	Standard	0.312"	0.1"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A179	00000
		1 1/2"	82°	Standard	0.312"	0.1"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A168	00000
		2 1/4"	82°	Standard	0.312"	0.1"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	96640A234	0000
		2 1/2"	82°	Standard	0.312"	0.1"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	96640A235	0000




				10-24

				1/4"	82°	Undercut	0.362"	0.081"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A275	00000


				3/8"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A132	00000
				3/8"	82°	Undercut	0.362"	0.081"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A276	00000
				1/2"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A135	00000
				1/2"	82°	Undercut	0.362"	0.081"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A277	0000
				1/2"	100°	Standard	0.362"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A355	00000
				5/8"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A169	0000
				5/8"	100°	Standard	0.362"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A356	00000
				3/4"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A137	00000
				3/4"	100°	Standard	0.362"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A357	00000
				7/8"	100°	Standard	0.362"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A358	00000


				1"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A139	00000
				1"	100°	Standard	0.362"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A359	00000
1 1/4"				82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	96640A171	0000
1 1/2"	82°			Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	96640A172	0000
1 3/4"	82°			Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	96640A236	0000
2"	82°			Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	96640A237	00000
2 1/2"	82°			Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	96640A238	00000




				10-32

				1/4"	100°	Standard	0.362"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A360	0000


				1/4"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-268B, NASM24693	—	25	93085A643	00000
				5/16"	82°	Undercut	0.362"	0.081"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A278	0000
				5/16"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-269B, NASM24693	—	25	93085A644	00000
				3/8"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A141	00000
				3/8"	82°	Undercut	0.362"	0.081"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A279	00000
				3/8"	100°	Standard	0.362"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A361	0000
				3/8"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-270B, NASM24693	—	25	93085A645	00000
				7/16"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A239	0000
				7/16"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-271B, NASM24693	—	25	93085A646	00000
				1/2"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A144	00000


				1/2"	82°	Undercut	0.362"	0.081"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A280	00000
				1/2"	100°	Standard	0.362"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A362	00000
				1/2"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-272B, NASM24693	—	25	93085A647	00000
				5/8"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A145	00000
				5/8"	82°	Undercut	0.362"	0.081"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	96640A281	0000
				5/8"	100°	Standard	0.362"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A363	00000
				5/8"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-273B, NASM24693	—	25	93085A648	00000
				3/4"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A146	00000
				3/4"	82°	Undercut	0.362"	0.081"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A282	00000
				3/4"	100°	Standard	0.362"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A364	00000


				3/4"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-274B, NASM24693	—	10	93085A649	0000
				7/8"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A240	00000
				7/8"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-275B, NASM24693	—	10	93085A651	0000
				1"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A148	00000
				1"	100°	Standard	0.362"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	96640A365	0000
		1"		100°	Standard	0.385"	0.083"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-276B, NASM24693	—	10	93085A652	0000
		1 1/4"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	96640A173	0000
		1 1/2"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	96640A174	00000
		1 3/4"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	96640A241	00000
		2"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	96640A242	00000


		3"	82°	Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	10	96640A243	0000




				12-24

				1/2"	82°	Standard	0.412"	0.132"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	96640A244	0000


				1/2"	82°	Undercut	0.412"	0.092"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	25	96640A283	00000
				5/8"	82°	Standard	0.412"	0.132"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	96640A245	0000
				1"	82°	Standard	0.412"	0.132"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	96640A246	0000
				1 1/4"	82°	Standard	0.412"	0.132"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	96640A247	00000




						1/4"-20

						3/8"	82°	Undercut	0.477"	0.107"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	96640A284	0000


1/2"	82°					Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A150	00000
1/2"	82°					Undercut	0.477"	0.107"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	25	96640A285	0000
1/2"	100°					Standard	0.477"	0.11"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	96640A366	00000
1/2"	100°					Standard	0.507"	0.11"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-94B, NASM24693	—	10	93085A653	00000
5/8"	82°					Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96640A181	00000
5/8"	100°					Standard	0.507"	0.11"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-95B, NASM24693	—	10	93085A654	00000
3/4"	82°					Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	96640A153	00000
3/4"	82°					Undercut	0.477"	0.107"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	25	96640A286	00000
3/4"	100°					Standard	0.507"	0.11"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-96B, NASM24693	—	10	93085A655	00000
7/8"	82°					Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	96640A248	00000


1"	82°					Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	96640A155	00000
1"	100°					Standard	0.477"	0.11"	Fully Threaded	80,000	ASME B18.6.3	—	—	10	96640A367	0000
1"	100°					Standard	0.507"	0.11"	Fully Threaded	70,000	SAE AMS2700	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, MS24693-98B, NASM24693	—	10	93085A656	00000
1 1/4"	82°					Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	96640A157	00000
1 1/2"	82°					Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	10	96640A158	0000
2"	82°					Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	Material Certificate	10	96640A175	0000
2 1/2"	82°					Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	10	96640A249	00000
3"	82°					Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	10	96640A250	00000
3 1/2"	82°					Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	10	96640A251	00000
4 1/2"	82°					Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	10	96640A252	00000




						5/16"-18

						1"	82°	Standard	0.597"	0.191"	Fully Threaded	80,000	ASME B18.6.3	—	—	10	96640A176	0000


						1 1/2"	82°	Standard	0.597"	0.191"	Fully Threaded	80,000	ASME B18.6.3	—	—	10	96640A177	00000
						1 3/4"	82°	Standard	0.597"	0.191"	Fully Threaded	80,000	ASME B18.6.3	—	—	5	96640A253	0000
						2"	82°	Standard	0.597"	0.191"	Fully Threaded	80,000	ASME B18.6.3	—	—	5	96640A254	0000




								M2 × 0.4 mm

								4 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	100	91698A200	0000


								5 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	70,000	DIN 965	—	—	100	91698A201	00000
		6 mm						90°	Standard	3.8 mm	1.2 mm	Fully Threaded	70,000	DIN 965	—	—	100	91698A202	0000
		8 mm	90°					Standard	3.8 mm	1.2 mm	Fully Threaded	70,000	DIN 965	—	—	100	91698A204	0000
		10 mm	90°					Standard	3.8 mm	1.2 mm	Fully Threaded	70,000	DIN 965	—	—	100	91698A206	0000
		12 mm	90°					Standard	3.8 mm	1.2 mm	Fully Threaded	70,000	DIN 965	—	—	25	91698A711	00000
		16 mm	90°					Standard	3.8 mm	1.2 mm	Fully Threaded	70,000	DIN 965	—	—	25	91698A712	00000
		20 mm	90°					Standard	3.8 mm	1.2 mm	Fully Threaded	70,000	DIN 965	—	—	25	91698A713	00000




								M2.5 × 0.45 mm

								4 mm	90°	Standard	4.7 mm	1.5 mm	Fully Threaded	70,000	DIN 965	—	—	100	91698A240	0000


				5 mm	90°			Standard	4.7 mm	1.5 mm	Fully Threaded	70,000	DIN 965	—	—	100	91698A241	0000
				6 mm	90°			Standard	4.7 mm	1.5 mm	Fully Threaded	70,000	DIN 965	—	—	100	91698A242	0000
				8 mm	90°			Standard	4.7 mm	1.5 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	100	91698A244	0000
				10 mm	90°			Standard	4.7 mm	1.5 mm	Fully Threaded	70,000	DIN 965	—	—	25	91698A714	00000
				12 mm	90°			Standard	4.7 mm	1.5 mm	Fully Threaded	70,000	DIN 965	—	—	25	91698A715	00000
				14 mm	90°			Standard	4.7 mm	1.5 mm	Fully Threaded	70,000	DIN 965	—	—	25	91698A716	00000
				16 mm	90°			Standard	4.7 mm	1.5 mm	Fully Threaded	70,000	DIN 965	—	—	25	91698A717	00000
				20 mm	90°			Standard	4.7 mm	1.5 mm	Fully Threaded	70,000	DIN 965	—	—	25	91698A718	00000
				25 mm	90°			Standard	4.7 mm	1.5 mm	Fully Threaded	70,000	DIN 965	—	—	25	91698A719	00000




								M3 × 0.5 mm

								4 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	50	91698A300	0000


								5 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	50	91698A301	0000
								6 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	50	91698A302	0000
								8 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	50	91698A304	0000
								10 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	50	91698A306	0000
								12 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	50	91698A308	0000
								14 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	25	91698A721	00000
								16 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	50	91698A312	0000
								18 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	50	91698A743	00000
								20 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	25	91698A722	00000
								25 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	25	91698A723	00000


30 mm	90°							Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	25	91698A724	00000




								M4 × 0.7 mm

								5 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	50	91698A423	0000


								6 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	50	91698A424	0000
						8 mm		90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	50	91698A426	0000
						10 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	50	91698A428	0000
						12 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	50	91698A430	0000
						14 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	25	91698A725	00000
						16 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	50	91698A435	0000
						18 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	25	91698A726	00000
						20 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	25	91698A727	00000
						25 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	25	91698A728	00000
						30 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	25	91698A729	00000




								M5 × 0.8 mm

								8 mm	90°	Standard	9.2 mm	2.5 mm	Fully Threaded	70,000	DIN 965	—	—	50	91698A534	00000


		10 mm	90°					Standard	9.2 mm	2.5 mm	Fully Threaded	70,000	DIN 965	—	—	50	91698A536	00000
		12 mm	90°					Standard	9.2 mm	2.5 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	50	91698A538	00000
		14 mm	90°					Standard	9.2 mm	2.5 mm	Fully Threaded	70,000	DIN 965	—	—	25	91698A731	00000
		16 mm	90°					Standard	9.2 mm	2.5 mm	Fully Threaded	70,000	DIN 965	—	—	25	91698A542	0000
		20 mm	90°					Standard	9.2 mm	2.5 mm	Fully Threaded	70,000	DIN 965	—	—	25	91698A732	00000
		30 mm	90°					Standard	9.2 mm	2.5 mm	Fully Threaded	70,000	DIN 965	—	—	25	91698A733	00000
		40 mm	90°					Standard	9.2 mm	2.5 mm	Fully Threaded	70,000	DIN 965	—	—	25	91698A734	00000




								M6 × 1 mm

								10 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	25	91698A645	0000


				12 mm				90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	25	91698A647	00000
				14 mm	90°			Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	25	91698A735	00000
				16 mm	90°			Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	25	91698A651	00000
				18 mm	90°			Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	25	91698A736	00000
				20 mm	90°			Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	25	91698A737	00000
				25 mm	90°			Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	25	91698A738	00000
				30 mm	90°			Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	25	91698A739	00000
				40 mm	90°			Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	25	91698A741	00000


				PTFE-Coated 18-8 Stainless Steel







										6-32

										1/4"	82°	Standard	0.262"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96653A109	00000


3/8"	82°									Standard	0.262"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96653A112	00000
1/2"	82°									Standard	0.262"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96653A115	00000
3/4"	82°									Standard	0.262"	0.083"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96653A118	00000




										8-32

										1/4"	82°	Undercut	0.312"	0.1"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96653A149	00000


										3/8"	82°	Standard	0.312"	0.1"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96653A152	00000
										1/2"	82°	Standard	0.312"	0.1"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96653A155	00000
										3/4"	82°	Standard	0.312"	0.1"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96653A158	00000




						10-32

						3/8"	82°					Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96653A179	00000


						1/2"	82°					Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96653A182	00000
						3/4"	82°					Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	50	96653A185	00000
						1"	82°					Standard	0.362"	0.116"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	96653A188	00000




												1/4"-20

												3/8"	82°	Undercut	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	96653A249	00000


		1/2"	82°									Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	96653A252	00000
		3/4"	82°									Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	25	96653A255	00000
		1"	82°									Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	10	96653A258	0000
		1 1/2"	82°									Standard	0.477"	0.153"	Fully Threaded	80,000	ASME B18.6.3	—	—	10	96653A261	00000


		Highly Corrosion-Resistant 316 Stainless Steel







														0-80

														1/8"	82°	Undercut	0.119"	0.025"	Fully Threaded	70,000	ASME B18.6.3	—	—	50	91500A300	0000


				3/16"	82°									Standard	0.119"	0.035"	Fully Threaded	70,000	ASME B18.6.3	—	—	50	91500A301	0000
				1/4"	82°									Standard	0.119"	0.035"	Fully Threaded	70,000	ASME B18.6.3	—	—	50	91500A302	0000




								2-56

								1/8"	82°					Undercut	0.162"	0.036"	Fully Threaded	70,000	ASME B18.6.3	—	—	100	91500A080	0000


								3/16"	82°					Undercut	0.162"	0.036"	Fully Threaded	70,000	ASME B18.6.3	—	—	100	91500A082	0000
								1/4"	82°					Standard	0.162"	0.051"	Fully Threaded	70,000	ASME B18.6.3	—	—	100	91500A084	0000
								5/16"	82°					Standard	0.162"	0.051"	Fully Threaded	70,000	ASME B18.6.3	—	—	100	91500A086	0000
3/8"								82°	Standard					0.162"	0.051"	Fully Threaded	70,000	ASME B18.6.3	—	—	100	91500A088	0000
1/2"	82°							Standard	0.162"					0.051"	Fully Threaded	70,000	ASME B18.6.3	—	—	100	91500A090	0000
5/8"	82°							Standard	0.172"					0.051"	Fully Threaded	70,000	ASME B18.6.3	—	—	100	91500A303	0000
3/4"	82°							Standard	0.172"					0.051"	Fully Threaded	70,000	ASME B18.6.3	—	—	100	91500A304	0000
1"	82°							Standard	0.172"					0.051"	Fully Threaded	70,000	ASME B18.6.3	—	—	100	91500A305	00000




								4-40

								3/16"	82°					Undercut	0.212"	0.047"	Fully Threaded	70,000	ASME B18.6.3	—	—	100	91500A120	0000


								1/4"	82°					Standard	0.212"	0.067"	Fully Threaded	70,000	ASME B18.6.3	—	—	100	91500A122	0000
								5/16"	82°					Standard	0.212"	0.067"	Fully Threaded	70,000	ASME B18.6.3	—	—	100	91500A124	0000
								3/8"	82°	Standard				0.212"	0.067"	Fully Threaded	70,000	ASME B18.6.3	—	—	100	91500A126	0000
								7/16"	82°	Standard	0.225"			0.067"	Fully Threaded	70,000	ASME B18.6.3	—	—	100	91500A306	0000
								1/2"	82°	Standard	0.212"			0.067"	Fully Threaded	70,000	ASME B18.6.3	—	—	100	91500A128	00000
								5/8"	82°	Standard	0.225"			0.067"	Fully Threaded	70,000	ASME B18.6.3	—	—	100	91500A307	00000
								3/4"	82°	Standard	0.225"			0.067"	Fully Threaded	70,000	ASME B18.6.3	—	—	100	91500A308	00000
								1"	82°	Standard	0.225"			0.067"	Fully Threaded	70,000	ASME B18.6.3	—	—	100	91500A309	00000




							5-40

							1/4"		82°	Standard	0.252"			0.075"	Fully Threaded	70,000	ASME B18.6.3	—	—	100	91500A310	00000


							3/8"		82°	Standard	0.252"			0.075"	Fully Threaded	70,000	ASME B18.6.3	—	—	100	91500A311	00000
							1/2"		82°	Standard	0.252"			0.075"	Fully Threaded	70,000	ASME B18.6.3	—	—	100	91500A312	00000




										6-32

		3/16"	82°							Undercut	0.279"			0.059"	Fully Threaded	70,000	ASME B18.6.3	—	—	100	91500A313	00000


		1/4"	82°							Standard	0.262"			0.083"	Fully Threaded	70,000	ASME B18.6.3	—	—	100	91500A144	0000
		5/16"	82°							Standard	0.262"			0.083"	Fully Threaded	70,000	ASME B18.6.3	—	—	100	91500A145	0000
		3/8"	82°							Standard	0.262"			0.083"	Fully Threaded	70,000	ASME B18.6.3	—	—	100	91500A146	0000
		7/16"	82°							Standard	0.279"			0.083"	Fully Threaded	70,000	ASME B18.6.3	—	—	100	91500A314	00000
		1/2"	82°							Standard	0.262"			0.083"	Fully Threaded	70,000	ASME B18.6.3	—	—	100	91500A148	0000
		5/8"	82°							Standard	0.262"	0.083"		Fully Threaded	70,000	ASME B18.6.3	—	—	100	91500A352	0000
		3/4"	82°							Standard	0.262"	0.083"	Fully Threaded	70,000	ASME B18.6.3	—	—	50	91500A151	0000
		7/8"	82°							Standard	0.279"	0.083"	Fully Threaded	70,000	ASME B18.6.3	—	—	50	91500A315	0000
		1"	82°							Standard	0.262"	0.083"	Fully Threaded	70,000	ASME B18.6.3	—	—	25	91500A153	0000
		1 1/4"	82°							Standard	0.262"	0.083"	Fully Threaded	70,000	ASME B18.6.3	—	—	25	91500A155	0000


		1 1/2"	82°	Standard						0.262"	0.083"	Fully Threaded	70,000	ASME B18.6.3	—	—	25	91500A157	0000
		1 3/4"	82°	Standard	0.279"					0.083"	Fully Threaded	70,000	ASME B18.6.3	—	—	25	91500A316	0000
		2"	82°	Standard	0.279"					0.083"	Fully Threaded	70,000	ASME B18.6.3	—	—	25	91500A317	0000




				8-32

				3/16"	82°					Undercut	0.332"	0.07"	Fully Threaded	70,000	ASME B18.6.3	—	—	50	91500A318	0000


				1/4"	82°					Undercut	0.312"	0.07"	Fully Threaded	70,000	ASME B18.6.3	—	—	50	91500A190	0000
				5/16"	82°					Standard	0.312"	0.1"	Fully Threaded	70,000	ASME B18.6.3	—	—	100	91500A353	0000
				3/8"	82°					Standard	0.312"	0.1"	Fully Threaded	70,000	ASME B18.6.3	—	—	50	91500A192	0000
				7/16"	82°					Standard	0.332"	0.1"	Fully Threaded	70,000	ASME B18.6.3	—	—	50	91500A319	0000
				1/2"	82°					Standard	0.312"	0.1"	Fully Threaded	70,000	ASME B18.6.3	—	—	50	91500A194	0000
5/8"				82°	Standard					0.312"	0.1"	Fully Threaded	70,000	ASME B18.6.3	—	—	50	91500A354	0000
3/4"	82°			Standard	0.312"					0.1"	Fully Threaded	70,000	ASME B18.6.3	—	—	50	91500A197	0000
7/8"	82°			Standard	0.332"					0.1"	Fully Threaded	70,000	ASME B18.6.3	—	—	50	91500A320	00000
1"	82°			Standard	0.312"					0.1"	Fully Threaded	70,000	ASME B18.6.3	—	—	25	91500A199	0000
1 1/4"	82°			Standard	0.312"					0.1"	Fully Threaded	70,000	ASME B18.6.3	—	Material Certificate	25	91500A201	0000


1 1/2"	82°			Standard	0.312"					0.1"	Fully Threaded	70,000	ASME B18.6.3	—	—	25	91500A203	0000
1 3/4"	82°			Standard	0.332"					0.1"	Fully Threaded	70,000	ASME B18.6.3	—	—	25	91500A321	00000
2"	82°			Standard	0.312"					0.1"	Fully Threaded	70,000	ASME B18.6.3	—	—	25	91500A355	0000
2 1/2"	82°			Standard	0.332"					0.1"	Fully Threaded	70,000	ASME B18.6.3	—	—	10	91500A322	0000




				10-24

				1/4"	82°					Undercut	0.385"	0.081"	Fully Threaded	70,000	ASME B18.6.3	—	—	50	91500A323	00000


				5/16"	82°	Undercut		0.385"		0.081"	Fully Threaded	70,000	ASME B18.6.3	—	—	50	91500A324	00000
				3/8"	82°	Standard		0.362"		0.116"	Fully Threaded	70,000	ASME B18.6.3	—	—	25	91500A240	0000
				1/2"	82°	Standard		0.362"		0.116"	Fully Threaded	70,000	ASME B18.6.3	—	—	25	91500A242	0000
				5/8"	82°	Standard		0.362"		0.116"	Fully Threaded	70,000	ASME B18.6.3	—	Material Certificate	50	91500A356	0000
				3/4"	82°	Standard		0.362"		0.116"	Fully Threaded	70,000	ASME B18.6.3	—	—	25	91500A245	0000
				7/8"	82°	Standard		0.385"		0.116"	Fully Threaded	70,000	ASME B18.6.3	—	—	25	91500A325	0000
				1"	82°	Standard		0.362"		0.116"	Fully Threaded	70,000	ASME B18.6.3	—	—	25	91500A247	0000
				1 1/4"	82°	Standard		0.362"		0.116"	Fully Threaded	70,000	ASME B18.6.3	—	—	25	91500A249	0000
				1 1/2"	82°	Standard		0.362"		0.116"	Fully Threaded	70,000	ASME B18.6.3	—	—	10	91500A251	0000
				1 3/4"	82°	Standard		0.385"		0.116"	Fully Threaded	70,000	ASME B18.6.3	—	—	25	91500A326	00000


				2"	82°	Standard	0.362"	0.116"	Fully Threaded	70,000	ASME B18.6.3	—	—	25	91500A357	00000
				2 1/2"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	ASME B18.6.3	—	—	10	91500A327	0000




						10-32

						1/4"	82°	Undercut	0.385"	0.081"	Fully Threaded	70,000	ASME B18.6.3	—	—	50	91500A328	00000


						5/16"	82°	Undercut	0.385"	0.081"	Fully Threaded	70,000	ASME B18.6.3	—	—	50	91500A329	00000
						3/8"	82°	Standard	0.362"	0.116"	Fully Threaded	70,000	ASME B18.6.3	—	—	50	91500A827	0000
						7/16"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	ASME B18.6.3	—	—	50	91500A330	00000
						1/2"	82°	Standard	0.362"	0.116"	Fully Threaded	70,000	ASME B18.6.3	—	—	25	91500A829	0000
						5/8"	82°	Standard	0.362"	0.116"	Fully Threaded	70,000	ASME B18.6.3	—	—	50	91500A358	0000
						3/4"	82°	Standard	0.362"	0.116"	Fully Threaded	70,000	ASME B18.6.3	—	—	25	91500A831	0000
						7/8"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	ASME B18.6.3	—	—	25	91500A331	0000
						1"	82°	Standard	0.362"	0.116"	Fully Threaded	70,000	ASME B18.6.3	—	—	25	91500A833	0000
						1 1/4"	82°	Standard	0.362"	0.116"	Fully Threaded	70,000	ASME B18.6.3	—	—	25	91500A835	0000
		1 1/2"				82°	Standard	0.362"	0.116"	Fully Threaded	70,000	ASME B18.6.3	—	—	10	91500A836	0000


		1 3/4"	82°			Standard	0.362"	0.116"	Fully Threaded	70,000	ASME B18.6.3	—	—	25	91500A359	0000
		2"	82°			Standard	0.362"	0.116"	Fully Threaded	70,000	ASME B18.6.3	—	—	25	91500A360	00000
		2 1/2"	82°			Standard	0.385"	0.116"	Fully Threaded	70,000	ASME B18.6.3	—	—	10	91500A332	0000




						12-24

						1/2"	82°	Standard	0.438"	0.132"	Fully Threaded	70,000	ASME B18.6.3	—	—	25	91500A334	0000


						3/4"	82°	Standard	0.438"	0.132"	Fully Threaded	70,000	ASME B18.6.3	—	—	25	91500A335	0000
						1"	82°	Standard	0.438"	0.132"	Fully Threaded	70,000	ASME B18.6.3	—	—	25	91500A336	00000




								1/4"-20

								3/8"	82°	Standard	0.507"	0.153"	Fully Threaded	70,000	ASME B18.6.3	—	—	25	91500A337	0000


1/2"	82°							Standard	0.477"	0.153"	Fully Threaded	70,000	ASME B18.6.3	—	—	25	91500A537	0000
1/2"	82°							Undercut	0.477"	0.107"	Fully Threaded	70,000	ASME B18.6.3	—	—	10	91500A911	0000
5/8"	82°							Standard	0.477"	0.153"	Fully Threaded	70,000	ASME B18.6.3	—	—	25	91500A538	0000
3/4"	82°							Standard	0.477"	0.153"	Fully Threaded	70,000	ASME B18.6.3	—	—	25	91500A540	0000
3/4"	82°							Undercut	0.477"	0.107"	Fully Threaded	70,000	ASME B18.6.3	—	—	10	91500A912	0000
7/8"	82°							Standard	0.507"	0.153"	Fully Threaded	70,000	ASME B18.6.3	—	—	10	91500A338	0000
1"	82°							Standard	0.477"	0.153"	Fully Threaded	70,000	ASME B18.6.3	—	Material Certificate	10	91500A542	0000
1"	82°							Undercut	0.477"	0.107"	Fully Threaded	70,000	ASME B18.6.3	—	—	10	91500A913	0000
1 1/8"	82°							Standard	0.507"	0.153"	Fully Threaded	70,000	ASME B18.6.3	—	—	10	91500A339	0000
1 1/4"	82°							Standard	0.477"	0.153"	Fully Threaded	70,000	ASME B18.6.3	—	—	10	91500A544	0000


1 1/2"	82°							Standard	0.477"	0.153"	Fully Threaded	70,000	ASME B18.6.3	—	—	10	91500A546	0000
1 3/4"	82°							Standard	0.477"	0.153"	Fully Threaded	70,000	ASME B18.6.3	—	—	10	91500A361	0000
2"	82°							Standard	0.477"	0.153"	Fully Threaded	70,000	ASME B18.6.3	—	—	10	91500A550	0000
2 1/4"	82°							Standard	0.507"	0.153"	Fully Threaded	70,000	ASME B18.6.3	—	—	10	91500A340	00000
2 1/2"	82°							Standard	0.477"	0.153"	Partially Threaded	70,000	ASME B18.6.3	—	—	10	91500A552	0000
2 3/4"	82°							Standard	0.507"	0.153"	Fully Threaded	70,000	ASME B18.6.3	—	—	5	91500A341	0000
3"	82°							Standard	0.477"	0.153"	Partially Threaded	70,000	ASME B18.6.3	—	—	10	91500A554	0000
3 1/2"	82°							Standard	0.477"	0.153"	Fully Threaded	70,000	ASME B18.6.3	—	Material Certificate	10	91500A362	00000
4"	82°							Standard	0.477"	0.153"	Fully Threaded	70,000	ASME B18.6.3	—	—	10	91500A363	00000
5"	82°							Standard	0.507"	0.153"	Fully Threaded	70,000	ASME B18.6.3	—	—	1	91500A342	0000




				1/4"-28

				1/2"	82°			Standard	0.507"	0.153"	Fully Threaded	70,000	ASME B18.6.3	—	—	25	91500A343	00000


				3/4"	82°			Standard	0.507"	0.153"	Fully Threaded	70,000	ASME B18.6.3	—	—	10	91500A344	0000
				1"	82°			Standard	0.507"	0.153"	Fully Threaded	70,000	ASME B18.6.3	—	—	10	91500A345	0000




								5/16"-18

								1/2"	82°	Undercut	0.635"	0.134"	Fully Threaded	70,000	ASME B18.6.3	—	—	10	91500A346	0000


								5/8"	82°	Standard	0.635"	0.191"	Fully Threaded	70,000	ASME B18.6.3	—	—	10	91500A347	0000
								3/4"	82°	Standard	0.597"	0.191"	Fully Threaded	70,000	ASME B18.6.3	—	—	10	91500A581	0000
								7/8"	82°	Standard	0.635"	0.191"	Fully Threaded	70,000	ASME B18.6.3	—	—	10	91500A348	00000
								1"	82°	Standard	0.597"	0.191"	Fully Threaded	70,000	ASME B18.6.3	—	—	10	91500A583	0000
		1 1/4"						82°	Standard	0.597"	0.191"	Fully Threaded	70,000	ASME B18.6.3	—	—	10	91500A585	0000
		1 1/2"	82°					Standard	0.597"	0.191"	Fully Threaded	70,000	ASME B18.6.3	—	—	10	91500A587	0000
		1 3/4"	82°					Standard	0.635"	0.191"	Fully Threaded	70,000	ASME B18.6.3	—	—	5	91500A349	0000
		2"	82°					Standard	0.597"	0.191"	Fully Threaded	70,000	ASME B18.6.3	—	—	5	91500A591	0000
		2 1/2"	82°					Standard	0.597"	0.191"	Fully Threaded	70,000	ASME B18.6.3	—	—	5	91500A364	0000
		3"	82°					Standard	0.597"	0.191"	Fully Threaded	70,000	ASME B18.6.3	—	—	5	91500A365	0000




								3/8"-16

						3/4"		82°	Standard	0.717"	0.23"	Fully Threaded	70,000	ASME B18.6.3	—	—	10	91500A622	0000


						1"	82°	Standard	0.717"	0.23"	Fully Threaded	70,000	ASME B18.6.3	—	—	10	91500A624	0000
						1 1/4"	82°	Standard	0.717"	0.23"	Fully Threaded	70,000	ASME B18.6.3	—	—	5	91500A626	0000
						1 1/2"	82°	Standard	0.717"	0.23"	Fully Threaded	70,000	ASME B18.6.3	—	—	5	91500A628	0000
						1 3/4"	82°	Standard	0.762"	0.23"	Fully Threaded	70,000	ASME B18.6.3	—	—	5	91500A350	00000
						2"	82°	Standard	0.717"	0.23"	Fully Threaded	70,000	ASME B18.6.3	—	—	5	91500A632	0000
						2 1/2"	82°	Standard	0.717"	0.23"	Fully Threaded	70,000	ASME B18.6.3	—	—	5	91500A366	0000
						3"	82°	Standard	0.717"	0.23"	Fully Threaded	70,000	ASME B18.6.3	—	Material Certificate	5	91500A367	0000
						3 1/2"	82°	Standard	0.762"	0.23"	Fully Threaded	70,000	ASME B18.6.3	—	—	1	91500A351	0000




								M2 × 0.4 mm

								3 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	70,000	DIN 965	—	—	50	91801A510	0000


								4 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	70,000	DIN 965	—	—	50	91801A105	00000
								5 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	25	91801A106	0000
								6 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	70,000	DIN 965	—	—	25	91801A107	0000
								8 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	25	91801A109	0000
								10 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	70,000	DIN 965	—	—	25	91801A111	0000
								12 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	70,000	DIN 965	—	—	100	91801A520	0000
								16 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	70,000	DIN 965	—	—	100	91801A530	00000
								20 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	70,000	DIN 965	—	—	100	91801A540	00000




								M2.5 × 0.45 mm

								3 mm	90°	Standard	4.7 mm	1.5 mm	Fully Threaded	70,000	DIN 965	—	—	100	91801A550	00000


								4 mm	90°	Standard	4.7 mm	1.5 mm	Fully Threaded	70,000	DIN 965	—	—	50	91801A133	0000
								5 mm	90°	Standard	4.7 mm	1.5 mm	Fully Threaded	70,000	DIN 965	—	—	25	91801A134	0000
								6 mm	90°	Standard	4.7 mm	1.5 mm	Fully Threaded	70,000	DIN 965	—	—	25	91801A135	0000
								8 mm	90°	Standard	4.7 mm	1.5 mm	Fully Threaded	70,000	DIN 965	—	—	25	91801A137	0000
				10 mm				90°	Standard	4.7 mm	1.5 mm	Fully Threaded	70,000	DIN 965	—	—	100	91801A560	00000
				12 mm	90°			Standard	4.7 mm	1.5 mm	Fully Threaded	70,000	DIN 965	—	—	100	91801A570	00000
				16 mm	90°			Standard	4.7 mm	1.5 mm	Fully Threaded	70,000	DIN 965	—	—	100	91801A580	00000




								M3 × 0.5 mm

								4 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	25	91801A149	00000


								5 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	100	91801A150	0000
								6 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	100	91801A151	0000
								8 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	Material Certificate	100	91801A154	0000
								10 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	100	91801A156	00000
								12 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	100	91801A158	0000
								14 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	100	91801A590	00000
								16 mm	90°	Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	50	91801A162	00000
		18 mm						90°	Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	50	91801A610	00000
		20 mm	90°					Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	50	91801A164	00000
		25 mm	90°					Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	50	91801A620	00000


		30 mm	90°					Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	50	91801A630	00000
		40 mm	90°					Standard	5.6 mm	1.65 mm	Fully Threaded	70,000	DIN 965	—	—	25	91801A640	0000




								M4 × 0.7 mm

								5 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	50	91801A650	0000


								6 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	100	91801A210	00000
						8 mm		90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	50	91801A212	00000
						10 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	50	91801A214	0000
						12 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	50	91801A216	0000
						14 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	50	91801A660	00000
						16 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	50	91801A220	00000
						18 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	50	91801A670	00000
						20 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	50	91801A224	00000
						22 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	50	91801A914	00000
						25 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	25	91801A227	00000


						30 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	50	91801A680	00000
						35 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	25	91801A915	0000
						40 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	25	91801A690	00000
						50 mm	90°	Standard	7.5 mm	2.2 mm	Fully Threaded	70,000	DIN 965	—	—	25	91801A710	00000




						M5 × 0.8 mm

						6 mm	90°	Standard	9.2 mm	2.5 mm	Fully Threaded	70,000	DIN 965	—	—	50	91801A720	00000


						8 mm	90°	Standard	9.2 mm	2.5 mm	Fully Threaded	70,000	DIN 965	—	—	50	91801A730	00000
						10 mm	90°	Standard	9.2 mm	2.5 mm	Fully Threaded	70,000	DIN 965	—	—	50	91801A254	00000
						12 mm	90°	Standard	9.2 mm	2.5 mm	Fully Threaded	70,000	DIN 965	—	—	50	91801A256	00000
						14 mm	90°	Standard	9.2 mm	2.5 mm	Fully Threaded	70,000	DIN 965	—	—	50	91801A740	00000
						16 mm	90°	Standard	9.2 mm	2.5 mm	Fully Threaded	70,000	DIN 965	—	—	50	91801A260	00000
						20 mm	90°	Standard	9.2 mm	2.5 mm	Fully Threaded	70,000	DIN 965	—	—	25	91801A264	0000
						22 mm	90°	Standard	9.2 mm	2.5 mm	Fully Threaded	70,000	DIN 965	—	—	25	91801A916	00000
						25 mm	90°	Standard	9.2 mm	2.5 mm	Fully Threaded	70,000	DIN 965	—	—	25	91801A268	00000
						30 mm	90°	Standard	9.2 mm	2.5 mm	Fully Threaded	70,000	DIN 965	—	—	10	91801A270	0000
				35 mm		90°	Standard	9.2 mm	2.5 mm	Fully Threaded	70,000	DIN 965	—	—	25	91801A917	00000


				40 mm	90°	Standard	9.2 mm	2.5 mm	Fully Threaded	70,000	DIN 965	—	—	10	91801A273	0000




						M6 × 1 mm

						8 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	25	91801A750	0000


						10 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	25	91801A305	00000
						12 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	25	91801A307	00000
						14 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	25	91801A760	00000
						16 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	25	91801A311	00000
						18 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	25	91801A770	00000
						20 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	10	91801A315	0000
						22 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	10	91801A918	0000
						25 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	10	91801A320	0000
						30 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	10	91801A325	00000
						35 mm	90°	Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	10	91801A329	00000


		40 mm	90°			Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	10	91801A333	00000
		50 mm	90°			Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	10	91801A780	0000
		60 mm	90°			Standard	11 mm	3 mm	Fully Threaded	70,000	DIN 965	—	—	1	91801A911	0000




						M8 × 1.25 mm

						12 mm	90°	Standard	14.5 mm	4 mm	Fully Threaded	70,000	DIN 965	—	—	5	91801A402	0000


						16 mm	90°	Standard	14.5 mm	4 mm	Fully Threaded	70,000	DIN 965	—	—	5	91801A406	00000
						18 mm	90°	Standard	14.5 mm	4 mm	Fully Threaded	70,000	DIN 965	—	—	10	91801A919	00000
						20 mm	90°	Standard	14.5 mm	4 mm	Fully Threaded	70,000	DIN 965	—	—	5	91801A410	0000
						22 mm	90°	Standard	14.5 mm	4 mm	Fully Threaded	70,000	DIN 965	—	—	10	91801A921	00000
						25 mm	90°	Standard	14.5 mm	4 mm	Fully Threaded	70,000	DIN 965	—	—	5	91801A415	0000
						30 mm	90°	Standard	14.5 mm	4 mm	Fully Threaded	70,000	DIN 965	—	—	10	91801A790	00000
						40 mm	90°	Standard	14.5 mm	4 mm	Fully Threaded	70,000	DIN 965	—	—	10	91801A810	00000




M10 × 1.5 mm

20 mm	90°							Standard	18 mm	5 mm	Fully Threaded	70,000	DIN 965	—	—	5	91801A820	00000


25 mm	90°							Standard	18 mm	5 mm	Fully Threaded	70,000	DIN 965	—	—	5	91801A830	00000
30 mm	90°							Standard	18 mm	5 mm	Fully Threaded	70,000	DIN 965	—	—	5	91801A840	00000
35 mm	90°							Standard	18 mm	5 mm	Fully Threaded	70,000	DIN 965	—	—	1	91801A912	0000
40 mm	90°							Standard	18 mm	5 mm	Fully Threaded	70,000	DIN 965	—	—	1	91801A913	0000