McMaster-Carr logo
    Filter by
    System of Measurement
    End Type
    Helical Insert Type
    Thread Direction
    Industrial Info Compare
    DFARS Specialty Metals
    Industrial Info Compare
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    3,626 Products
    About Threaded Inserts
    industrial info icon

    Choose the right threaded insert for your application and learn how to install it securely.

    Helical Threaded Inserts

    Restore, reinforce, or create threads in metal. The tough coils on these inserts expand once installed to anchor in a tapped hole. Also known as Heli-Coil inserts, they're often used in engine heads and machinery housings where strong connections are critical. Unlike threadlocking inserts, you can remove and reuse them without them losing their strength.
    Installation requires a drill bit, a helical insert tap, and an installation tool.
    Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.
    Prongless—Without a prong to break off and retrieve, these inserts save time and avoid leftover debris in holes.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Nickel—More resistant to acids and salt water than stainless steel inserts.
    Ultra-Corrosion-Resistant Lightweight Titanium—The best of both worlds, these inserts are lightweight yet strong enough for the highest stress applications. They resist acids and salt water better than nickel or stainless steel inserts.
    Inserts
    Through-Hole
    Taps
    Closed-End
    Hole Taps
    Installation
    Tools
    Prong
    Break-Off Tools
    Inserts with
    Installation Tools
    Thread Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Each
    Each
    Each
    Each
    No. of Inserts
    Included
    Each
    Pronged
    Image of Product. Pronged. Bottom orientation. Threaded Inserts. Helical Threaded Inserts, Pronged.

    Pronged

     
    18-8 Stainless Steel
    1-64
    		0.073"46 Ga.
    		0.081"—1091732A0040000091709A09000000091709A68300000090261A131000000092955A2010000000————0
    1-64
    		0.110"46 Ga.
    		0.081"—1091732A008000091709A0900000091709A6830000090261A13100000092955A201000000————0
    1-64
    		0.146"46 Ga.
    		0.081"—1091732A011000091709A0900000091709A6830000090261A13100000092955A201000000————0
    2-56
    		0.086"41 Ga.
    		0.096"MS1220951091732A203000091709A0980000091709A4010000090261A1400000092955A1010000001098356A1110000000
    2-56
    		0.129"41 Ga.
    		0.096"MS1221351091732A204000091709A0980000091709A4010000090261A1400000092955A1010000001091732A892000000
    2-56
    		0.172"41 Ga.
    		0.096"MS1221751091732A201000091709A0980000091709A4010000090261A1400000092955A1010000001098356A112000000
    2-56
    		0.215"41 Ga.
    		0.096"MS1222151091732A202000091709A0980000091709A4010000090261A1400000092955A1010000001098356A113000000
    3-48
    		0.099"7/64"
    		0.109"MS1221151091732A205000091709A0990000091709A4040000090261A15000000092955A101000000————0
    3-48
    		0.148"7/64"
    		0.109"MS1221551091732A207000091709A0990000091709A4040000090261A15000000092955A101000000————0
    3-56
    		0.099"36 Ga.
    		0.107"MS1246701091732A001000091709A0550000091709A4030000090261A10100000092955A101000000————0
    3-56
    		0.148"36 Ga.
    		0.107"MS1247101091732A003000091709A0550000091709A4030000090261A10100000092955A101000000————0
    4-40
    		0.112"31 Ga.
    		0.120"MS1220761091732A351000091709A1010000091709A4070000090261A15100000092955A1030000001098356A114000000
    4-40
    		0.168"31 Ga.
    		0.120"MS1221161091732A285000091709A1010000091709A4070000090261A15100000092955A1030000001091732A89900000
    4-40
    		0.224"31 Ga.
    		0.120"MS1221561091732A701000091709A1010000091709A4070000090261A15100000092955A1030000001091732A43000000
    4-40
    		0.280"31 Ga.
    		0.120"MS1221961091732A702000091709A1010000091709A4070000090261A15100000092955A1030000001098356A115000000
    4-40
    		0.336"31 Ga.
    		0.120"MS122236591732A420000091709A1010000091709A4070000090261A15100000092955A1030000001098356A116000000
    4-48
    		0.112"31 Ga.
    		0.120"MS1246711091732A005000091709A0570000091709A4100000090261A10200000092955A103000000————0
    4-48
    		0.168"31 Ga.
    		0.120"MS1247111091732A007000091709A0570000091709A4100000090261A10200000092955A103000000————0
    5-40
    		0.125"29 Ga.
    		0.136"MS1220771091732A009000091709A0610000091709A4130000090261A10400000092955A103000000————0
    5-40
    		0.188"29 Ga.
    		0.136"MS1221171091732A010000091709A0610000091709A4130000090261A10400000092955A103000000————0
    5-40
    		0.250"29 Ga.
    		0.136"MS1221571091732A704000091709A0610000091709A4130000090261A10400000092955A103000000————0
    6-32
    		0.138"25 Ga.
    		0.150"MS1220781091732A355000091709A1020000091709A4160000090261A15200000092955A105000001091732A44000000
    6-32
    		0.207"25 Ga.
    		0.150"MS1221181091732A286000091709A1020000091709A4160000090261A15200000092955A105000001091732A90600000
    6-32
    		0.276"25 Ga.
    		0.150"MS1221581091732A707000091709A1020000091709A4160000090261A15200000092955A105000001091732A45000000
    6-32
    		0.345"25 Ga.
    		0.150"MS1221981091732A708000091709A1020000091709A4160000090261A15200000092955A105000001098356A117000000
    6-32
    		0.414"25 Ga.
    		0.150"MS122238591732A425000091709A1020000091709A4160000090261A15200000092955A105000001098356A118000000
    6-40
    		0.138"25 Ga.
    		0.150"MS1246531091732A012000091709A0630000091709A4190000090261A10600000092955A10500000————0
    6-40
    		0.207"25 Ga.
    		0.150"MS1246931091732A014000091709A0630000091709A4190000090261A10600000092955A10500000————0
    6-40
    		0.276"25 Ga.
    		0.150"MS1247331091732A710000091709A0630000091709A4190000090261A10600000092955A10500000————0
    8-32
    		0.164"16 Ga.
    		0.177"MS1220791091732A359000091709A1030000091709A4220000090261A15300000092955A107000001091732A46000000
    8-32
    		0.246"16 Ga.
    		0.177"MS1221191091732A287000091709A1030000091709A4220000090261A15300000092955A107000001091732A91000000
    8-32
    		0.328"16 Ga.
    		0.177"MS1221591091732A713000091709A1030000091709A4220000090261A15300000092955A107000001091732A47000000
    8-32
    		0.410"16 Ga.
    		0.177"MS1221991091732A714000091709A1030000091709A4220000090261A15300000092955A107000001098356A11900000
    8-32
    		0.492"16 Ga.
    		0.177"MS122239591732A415000091709A1030000091709A4220000090261A15300000092955A107000001098356A12100000
    8-36
    		0.164"16 Ga.
    		0.177"MS1246541091732A017000091709A0650000091709A4250000090261A14900000092955A10700000————0
    8-36
    		0.246"16 Ga.
    		0.177"MS1246941091732A019000091709A0650000091709A4250000090261A14900000092955A10700000————0
    8-36
    		0.328"16 Ga.
    		0.177"MS1247341091732A716000091709A0650000091709A4250000090261A14900000092955A10700000————0
    10-24
    		0.190"5 Ga.
    		0.206"MS1220801091732A364000091709A1040000091709A4280000090261A15400000092955A109000001098356A12200000
    10-24
    		0.285"5 Ga.
    		0.206"MS1221201091732A211000091709A1040000091709A4280000090261A15400000092955A109000001091732A91400000
    10-24
    		0.380"5 Ga.
    		0.206"MS1221601091732A719000091709A1040000091709A4280000090261A15400000092955A109000001091732A48000000
    10-24
    		0.475"5 Ga.
    		0.206"MS122200591732A720000091709A1040000091709A4280000090261A15400000092955A109000001098356A12300000
    10-24
    		0.570"13/64"
    		0.203"MS1222401091732A223000091709A1040000091709A4280000090261A15400000092955A109000001098356A12400000
    10-32
    		0.190"13/64"
    		0.203"MS1246551091732A511000091709A1510000091709A4310000090261A16100000092955A109000001091732A49000000
    10-32
    		0.285"13/64"
    		0.203"MS1246951091732A231000091709A1510000091709A4310000090261A16100000092955A109000001091732A91600000
    10-32
    		0.380"13/64"
    		0.203"MS1247351091732A725000091709A1510000091709A4310000090261A16100000092955A109000001091732A51000000
    10-32
    		0.475"13/64"
    		0.203"MS1247751091732A726000091709A1510000091709A4310000090261A16100000092955A109000001098356A12500000
    10-32
    		0.570"13/64"
    		0.203"MS1248151091732A727000091709A1510000091709A4310000090261A16100000092955A109000001098356A12600000
    12-24
    		0.216"1 Ga.
    		0.228"—1091732A021000091709A0670000091709A4340000090261A11000000092955A10900000————0
    12-24
    		0.324"1 Ga.
    		0.228"—1091732A023000091709A0670000091709A4340000090261A11000000092955A109000001091732A91800000
    12-24
    		0.432"1 Ga.
    		0.228"—1091732A731000091709A0670000091709A4340000090261A11000000092955A10900000————0
    1/4"-20
    		0.250"H
    		0.266"MS1220811091732A368000091709A1050000091709A4370000090261A15500000092955A111000001091732A52000000
    1/4"-20
    		0.375"H
    		0.266"MS1221211091732A212000091709A1050000091709A4370000090261A15500000092955A111000001091732A92200000
    1/4"-20
    		0.500"H
    		0.266"MS1221611091732A734000091709A1050000091709A4370000090261A15500000092955A111000001091732A53000000
    1/4"-20
    		0.625"H
    		0.266"MS1222011091732A735000091709A1050000091709A4370000090261A15500000092955A111000001098356A12700000
    1/4"-20
    		0.750"H
    		0.266"MS1222411091732A736000091709A1050000091709A4370000090261A15500000092955A111000001098356A12800000
    1/4"-28
    		0.250"6.7 mm
    		6.7 mmMS1246561091732A515000091709A1520000091709A4400000090261A16200000092955A111000001098356A12900000
    1/4"-28
    		0.375"6.7 mm
    		6.7 mmMS1246961091732A232000091709A1520000091709A4400000090261A16200000092955A111000001091732A92400000
    1/4"-28
    		0.500"6.7 mm
    		6.7 mmMS1247361091732A737000091709A1520000091709A4400000090261A16200000092955A111000001098356A13100000
    1/4"-28
    		0.625"6.7 mm
    		6.7 mmMS1247761091732A738000091709A1520000091709A4400000090261A16200000092955A111000001098356A13200000
    5/16"-18
    		0.312"Q
    		0.332"MS1220821091732A372000091709A1060000091709A4430000090261A15600000092955A1130000001091732A54000000
    5/16"-18
    		0.469"Q
    		0.332"MS1221221091732A213000091709A1060000091709A4430000090261A15600000092955A1130000001091732A92600000
    5/16"-18
    		0.625"Q
    		0.332"MS1221621091732A740000091709A1060000091709A4430000090261A15600000092955A1130000001091732A55000000
    5/16"-18
    		0.781"Q
    		0.332"MS1222021091732A224000091709A1060000091709A4430000090261A15600000092955A1130000001098356A13300000
    5/16"-18
    		0.938"Q
    		0.332"MS122242591732A741000091709A1060000091709A4430000090261A15600000092955A1130000001098356A13400000
    5/16"-24
    		0.312"21/64"
    		0.328"MS1246571091732A519000091709A1530000091709A4460000090261A16300000092955A1210000001098356A13500000
    5/16"-24
    		0.469"21/64"
    		0.328"MS1246971091732A233000091709A1530000091709A4460000090261A16300000092955A1210000001091732A92800000
    5/16"-24
    		0.625"21/64"
    		0.328"MS1247371091732A743000091709A1530000091709A4460000090261A16300000092955A1210000001098356A13600000
    5/16"-24
    		0.781"21/64"
    		0.328"MS124777591732A744000091709A1530000091709A4460000090261A16300000092955A121000000————0
    3/8"-16
    		0.375"X
    		0.397"MS1220831091732A376000091709A1070000091709A4490000090261A15700000092955A1150000001091732A56000000
    3/8"-16
    		0.562"X
    		0.397"MS1221231091732A214000091709A1070000091709A4490000090261A15700000092955A1150000001091732A93000000
    3/8"-16
    		0.750"X
    		0.397"MS122163591732A746000091709A1070000091709A4490000090261A15700000092955A115000000591732A57000000
    3/8"-16
    		0.938"X
    		0.397"MS122203591732A747000091709A1070000091709A4490000090261A15700000092955A115000000598356A13700000
    3/8"-16
    		1.125"X
    		0.397"MS1222431091732A225000091709A1070000091709A4490000090261A15700000092955A115000000598356A138000000
    3/8"-24
    		0.375"25/64"
    		0.391"MS1246581091732A524000091709A1540000091709A4520000090261A16400000092955A123000000————0
    3/8"-24
    		0.562"25/64"
    		0.391"MS1246981091732A234000091709A1540000091709A4520000090261A16400000092955A1230000001091732A93200000
    3/8"-24
    		0.750"25/64"
    		0.391"MS124738591732A749000091709A1540000091709A4520000090261A16400000092955A123000000598356A13900000
    3/8"-24
    		0.938"25/64"
    		0.391"MS124778191732A750000091709A1540000091709A4520000090261A16400000092955A123000000————0
    7/16"-14
    		0.438"29/64"
    		0.453"MS1220841091732A381000091709A1080000091709A4550000090261A15800000092955A2020000001098356A14100000
    7/16"-14
    		0.656"29/64"
    		0.453"MS1221241091732A215000091709A1080000091709A4550000090261A15800000092955A2020000001091732A93400000
    7/16"-14
    		0.875"29/64"
    		0.453"MS122164591732A752000091709A1080000091709A4550000090261A15800000092955A202000000598356A142000000
    7/16"-20
    		0.438"29/64"
    		0.453"MS1246591091732A528000091709A1550000091709A4580000090261A16500000092955A2030000001098356A14300000
    7/16"-20
    		0.656"29/64"
    		0.453"MS1246991091732A235000091709A1550000091709A4580000090261A16500000092955A2030000001091732A93600000
    7/16"-20
    		0.875"29/64"
    		0.453"MS124739591732A755000091709A1550000091709A4580000090261A16500000092955A203000000————0
    1/2"-13
    		0.500"17/32"
    		0.531"MS1220851091732A385000091709A1090000091709A4610000090261A15900000092955A1190000001091732A58000000
    1/2"-13
    		0.750"17/32"
    		0.531"MS122125591732A216000091709A1090000091709A4610000090261A15900000092955A119000000591732A93800000
    1/2"-13
    		1"17/32"
    		0.531"MS122165591732A815000091709A1090000091709A4610000090261A15900000092955A119000000591732A59000000
    1/2"-13
    		1.250"17/32"
    		0.531"MS122205591732A816000091709A1090000091709A4610000090261A15900000092955A119000000598356A144000000
    1/2"-13
    		1.500"33/64"
    		0.516"MS122245591732A226000091709A1090000091709A4610000090261A15900000092955A119000000598356A145000000
    1/2"-20
    		0.500"33/64"
    		0.516"MS1246601091732A533000091709A1560000091709A4640000090261A16600000092955A1270000001098356A146000000
    1/2"-20
    		0.750"33/64"
    		0.516"MS124700591732A236000091709A1560000091709A4640000090261A16600000092955A127000000591732A94000000
    1/2"-20
    		1"33/64"
    		0.516"MS124740591732A758000091709A1560000091709A4640000090261A16600000092955A127000000598356A147000000
    1/2"-20
    		1.250"33/64"
    		0.516"MS124780191732A759000091709A1560000091709A4640000090261A16600000092955A127000000————0
    9/16"-12
    		0.562"19/32"
    		0.594"MS122086591732A3890000091709A1110000091709A46700000090261A17100000———0————0
    9/16"-12
    		0.844"19/32"
    		0.594"MS122126591732A2170000091709A1110000091709A46700000090261A17100000———0691732A317000000
    9/16"-18
    		0.562"37/64"
    		0.578"MS124661591732A537000091709A1570000091709A47000000090261A112000000———0————0
    9/16"-18
    		0.844"37/64"
    		0.578"MS124701591732A237000091709A1570000091709A47000000090261A112000000———0691732A337000000
    5/8"-11
    		0.625"21/32"
    		0.656"MS122087591732A394000091709A1120000091709A47300000090261A17200000———0698356A148000000
    5/8"-11
    		0.938"21/32"
    		0.656"MS122127191732A218000091709A1120000091709A47300000090261A17200000———0691732A018000000
    5/8"-11
    		1.250"21/32"
    		0.656"MS122167191732A395000091709A1120000091709A47300000090261A17200000———0698356A149000000
    5/8"-11
    		1.562"21/32"
    		0.656"MS122207591732A227000091709A1120000091709A47300000090261A17200000———0————0
    5/8"-18
    		0.625"41/64"
    		0.641"MS124662191732A541000091709A1580000091709A47600000090261A182000000———01098356A151000000
    5/8"-18
    		0.938"41/64"
    		0.641"MS124702191732A238000091709A1580000091709A47600000090261A182000000———0691732A038000000
    3/4"-10
    		0.750"25/32"
    		0.781"MS122088191732A398000091709A11300000091709A47900000090261A17300000———0598356A152000000
    3/4"-10
    		1.125"25/32"
    		0.781"MS122128191732A219000091709A11300000091709A47900000090261A17300000———0491732A319000000
    3/4"-10
    		1.500"25/32"
    		0.781"MS122168191732A222000091709A11300000091709A47900000090261A17300000———0598356A153000000
    3/4"-16
    		0.750"49/64"
    		0.766"MS124663191732A545000091709A15900000091709A48200000090261A183000000———0————0
    3/4"-16
    		1.125"49/64"
    		0.766"MS124703191732A239000091709A15900000091709A48200000090261A183000000———0491732A339000000
    7/8"-9
    		0.875"29/32"
    		0.906"MS122089191732A403000091709A11400000091709A48500000090261A17400000———0————0
    7/8"-9
    		1.312"29/32"
    		0.906"MS122129191732A220000091709A11400000091709A48500000090261A17400000———0691732A320000000
    7/8"-14
    		0.875"57/64"
    		0.891"MS124664191732A549000091709A16100000091709A48800000090261A114000000———0————0
    7/8"-14
    		1.312"57/64"
    		0.891"MS124704191732A240000091709A16100000091709A48800000090261A114000000———0691732A340000000
    1"-8
    		1"1 1/32"
    		1.031"MS122090191732A407000091709A11500000091709A49100000090261A17500000———0————0
    1"-8
    		1.500"1 1/32"
    		1.031"MS122130191732A221000091709A11500000091709A49100000090261A17500000———0691732A321000000
    1"-12
    		1"1 1/32"
    		1.031"MS124651191732A029000091709A07300000091709A49700000090261A176000000———0————0
    1"-12
    		1.500"1 1/32"
    		1.031"MS124691191732A030000091709A07300000091709A49700000090261A176000000———0691732A123000000
    1"-14
    		1"1 1/32"
    		1.031"MS124665191732A025000091709A07100000091709A49400000090261A177000000———0————0
    1"-14
    		1.500"1 1/32"
    		1.031"MS124705191732A027000091709A07100000091709A49400000090261A177000000———0691732A121000000
    1 1/8"-7
    		1.125"1 11/64"
    		1.172"MS122091191732A141000091709A11600000091709A500000000———0———0————0
    1 1/8"-7
    		1.688"1 11/64"
    		1.172"MS122131191732A143000091709A11600000091709A500000000———0———0591732A322000000
    1 1/8"-12
    		1.125"1 5/32"
    		1.156"MS124666191732A031000091709A07500000091709A503000000———0———0————0
    1 1/8"-12
    		1.688"1 5/32"
    		1.156"MS124706191732A034000091709A07500000091709A503000000———0———0591732A125000000
    1 1/4"-7
    		1.250"1 19/64"
    		1.297"MS122092191732A032000091709A11700000091709A50600000090261A124000000———0————0
    1 1/4"-7
    		1.875"1 19/64"
    		1.297"MS122132191732A037000091709A11700000091709A50600000090261A124000000———0491732A323000000
    1 1/4"-8
    		1.875"1 1/4"
    		1.250"—192335A111000092335A31100000091709A31000000092450A19200000———0————0
    1 1/4"-12
    		1.250"1 9/32"
    		1.281"MS124667191732A0390000091709A07700000091709A50900000090261A167000000———0————0
    1 1/4"-12
    		1.875"1 9/32"
    		1.281"MS124707191732A0410000091709A07700000091709A50900000090261A167000000———0491732A129000000
    1 1/2"-6
    		1.500"1 35/64"
    		1.547"MS122094191732A0500000091709A11900000091709A518000000———0———0————0
    1 1/2"-6
    		2.250"1 35/64"
    		1.547"MS122134191732A0520000091709A11900000091709A518000000———0———0491732A325000000
    1 1/2"-8
    		2.250"1 1/2"
    		1.500"—192335A1150000092335A31500000091709A32000000092450A19300000———0————0
    1 1/2"-12
    		2.250"1 17/32"
    		1.531"MS124709191732A0540000091709A08300000091709A521000000———0———0491732A13700000000
    1 3/4"-8
    		2.625"1 3/4"
    		1.750"—192335A1190000092335A31900000091709A33000000092450A19400000———0————0
    M2 x 0.4 mm2 mm2.1 mm
    		2.1 mmDIN 8140, SAE MA3279-1401091732A181000091709A24000000091709A23000000090261A18500000092955A206000000————0
    M2 x 0.4 mm3 mm2.1 mm
    		2.1 mmDIN 8140, SAE MA3279-1901091732A182000091709A24000000091709A23000000090261A18500000092955A206000000————0
    M2 x 0.4 mm4 mm2.1 mm
    		2.1 mmDIN 8140, SAE MA3279-2401091732A183000091709A24000000091709A23000000090261A18500000092955A206000000————0
    M2.2 x 0.45 mm2.2 mm2.35 mm
    		2.35 mmSAE MA3279-100591732A760000091709A1900000091709A21000000090261A1860000092955A204000000————0
    M2.2 x 0.45 mm3.3 mm2.35 mm
    		2.35 mmSAE MA3279-150591732A7610000091709A1900000091709A21000000090261A1860000092955A204000000————0
    M2.2 x 0.45 mm4.4 mm2.35 mm
    		2.35 mmSAE MA3279-200591732A7620000091709A1900000091709A21000000090261A1860000092955A204000000————0
    M2.5 x 0.45 mm2.5 mm37 Ga.
    		0.104"DIN 8140, SAE MA3279-1011091732A764000091709A6780000091709A5780000090261A18700000092955A204000000————0
    M2.5 x 0.45 mm3.8 mm37 Ga.
    		0.104"DIN 8140, SAE MA3279-1511091732A767000091709A6780000091709A5780000090261A18700000092955A2040000001091732A873000000
    M2.5 x 0.45 mm5 mm37 Ga.
    		0.104"DIN 8140, SAE MA3279-2011091732A770000091709A6780000091709A5780000090261A18700000092955A204000000————0
    M2.5 x 0.45 mm6.3 mm37 Ga.
    		0.104"DIN 8140, SAE MA3279-2511091732A771000091709A6780000091709A5780000090261A18700000092955A204000000————0
    M3 x 0.5 mm3 mm3.2 mm
    		3.2 mmDIN 8140, SAE MA3279-1021091732A645000091709A3550000091709A5240000090261A18800000092955A1550000001091732A401000000
    M3 x 0.5 mm4.5 mm3.2 mm
    		3.2 mmDIN 8140, SAE MA3279-1521091732A647000091709A3550000091709A5240000090261A18800000092955A1550000001091732A942000000
    M3 x 0.5 mm6 mm3.2 mm
    		3.2 mmDIN 8140, SAE MA3279-2021091732A773000091709A3550000091709A5240000090261A18800000092955A1550000001091732A411000000
    M3 x 0.5 mm7.5 mm3.2 mm
    		3.2 mmDIN 8140, SAE MA3279-2521091732A780000091709A3550000091709A5240000090261A18800000092955A155000000————0
    M3 x 0.5 mm9 mm3.15 mm
    		3.15 mmSAE MA3279-3021091732A184000091709A3550000091709A5240000090261A18800000092955A155000000————0
    M3.5 x 0.6 mm3.5 mm3.7 mm
    		3.7 mmDIN 8140, SAE MA3279-103591732A774000091709A1950000091709A22000000090261A18900000092955A155000000————0
    M3.5 x 0.6 mm5.3 mm3.7 mm
    		3.7 mmDIN 8140, SAE MA3279-1531091732A775000091709A1950000091709A22000000090261A18900000092955A155000000————0
    M3.5 x 0.6 mm7 mm3.7 mm
    		3.7 mmDIN 8140, SAE MA3279-203591732A778000091709A1950000091709A22000000090261A18900000092955A155000000————0
    M4 x 0.7 mm4 mm19 Ga.
    		0.166"DIN 8140, SAE MA3279-1041091732A649000091709A3590000091709A5270000090261A19000000092955A1600000001091732A42100000
    M4 x 0.7 mm6 mm19 Ga.
    		0.166"DIN 8140, SAE MA3279-1541091732A656000091709A3590000091709A5270000090261A19000000092955A1600000001091732A94400000
    M4 x 0.7 mm8 mm19 Ga.
    		0.166"DIN 8140, SAE MA3279-2041091732A776000091709A3590000091709A5270000090261A19000000092955A1600000001091732A43100000
    M4 x 0.7 mm10 mm19 Ga.
    		0.166"DIN 8140, SAE MA3279-2541091732A781000091709A3590000091709A5270000090261A19000000092955A1600000001098356A15400000
    M4 x 0.7 mm12 mm4.2 mm
    		4.2 mmSAE MA3279-3041091732A185000091709A3590000091709A5270000090261A19000000092955A1600000001098356A15500000
    M5 x 0.8 mm5 mm5.3 mm
    		5.3 mmDIN 8140, SAE MA3279-1051091732A631000091709A2010000091709A5300000090261A19100000092955A129000001091732A44100000
    M5 x 0.8 mm7.5 mm5.3 mm
    		5.3 mmDIN 8140, SAE MA3279-1551091732A261000091709A2010000091709A5300000090261A19100000092955A129000001091732A94600000
    M5 x 0.8 mm10 mm5.3 mm
    		5.3 mmDIN 8140, SAE MA3279-2051091732A779000091709A2010000091709A5300000090261A19100000092955A129000001091732A45100000
    M5 x 0.8 mm12.5 mm5.3 mm
    		5.3 mmDIN 8140, SAE MA3279-2551091732A784000091709A2010000091709A5300000090261A19100000092955A129000001098356A15600000
    M5 x 0.8 mm15 mm5.2 mm
    		5.2 mmSAE MA3279-3051091732A186000091709A2010000091709A5300000090261A19100000092955A129000001098356A15700000
    M6 x 1 mm6 mm6.3 mm
    		6.3 mmDIN 8140, SAE MA3279-1061091732A635000091709A2020000091709A5330000090261A19200000092955A131000001091732A46100000
    M6 x 1 mm9 mm6.3 mm
    		6.3 mmDIN 8140, SAE MA3279-1561091732A262000091709A2020000091709A5330000090261A19200000092955A131000001091732A94800000
    M6 x 1 mm12 mm6.3 mm
    		6.3 mmDIN 8140, SAE MA3279-2061091732A782000091709A2020000091709A5330000090261A19200000092955A131000001091732A47100000
    M6 x 1 mm15 mm6.3 mm
    		6.3 mmDIN 8140, SAE MA3279-2561091732A786000091709A2020000091709A5330000090261A19200000092955A131000001098356A15800000
    M6 x 1 mm18 mm6.25 mm
    		6.25 mmSAE MA3279-3061091732A187000091709A2020000091709A5330000090261A19200000092955A131000001098356A15900000
    M7 x 1 mm7 mm7.3 mm
    		7.3 mmDIN 8140, SAE MA3279-1071091732A639000091709A2030000091709A5360000090261A19300000092955A205000000————0
    M7 x 1 mm10.5 mm7.3 mm
    		7.3 mmDIN 8140, SAE MA3279-1571091732A263000091709A2030000091709A5360000090261A19300000092955A2050000001091732A95000000
    M7 x 1 mm14 mm7.3 mm
    		7.3 mmDIN 8140, SAE MA3279-2071091732A7850000091709A2030000091709A5360000090261A19300000092955A205000000————0
    M8 x 1 mm8 mm8.3 mm
    		8.3 mmDIN 8140, SAE MA3279-1081091732A791000091709A6500000091709A5390000090261A30000000092955A133000000————0
    M8 x 1 mm12 mm8.3 mm
    		8.3 mmDIN 8140, SAE MA3279-1581091732A794000091709A6500000091709A5390000090261A30000000092955A1330000001091732A82000000
    M8 x 1 mm16 mm8.3 mm
    		8.3 mmDIN 8140, SAE MA3279-2081091732A797000091709A6500000091709A5390000090261A30000000092955A133000000————0
    M8 x 1 mm20 mm8.3 mm
    		8.3 mmSAE MA3279-2581092450A613000091709A6500000091709A5390000090261A30000000092955A133000000————0
    M8 x 1 mm24 mm8.3 mm
    		8.3 mmSAE MA3279-3081092450A614000091709A6500000091709A5390000090261A30000000092955A133000000————0
    M8 x 1.25 mm8 mm8.4 mm
    		8.4 mmDIN 8140, SAE MA3279-1091091732A644000091709A2040000091709A5420000090261A19400000092955A1330000001091732A481000000
    M8 x 1.25 mm12 mm8.4 mm
    		8.4 mmDIN 8140, SAE MA3279-1591091732A264000091709A2040000091709A5420000090261A19400000092955A1330000001091732A95200000
    M8 x 1.25 mm16 mm8.4 mm
    		8.4 mmDIN 8140, SAE MA3279-2091091732A788000091709A2040000091709A5420000090261A19400000092955A1330000001091732A491000000
    M8 x 1.25 mm20 mm8.4 mm
    		8.4 mmDIN 8140, SAE MA3279-2591091732A787000091709A2040000091709A5420000090261A19400000092955A1330000001098356A16100000
    M8 x 1.25 mm24 mm8.3 mm
    		8.3 mmSAE MA3279-309591732A188000091709A2040000091709A5420000090261A19400000092955A1330000001098356A16200000
    M10 x 1 mm10 mm13/32"
    		0.406"DIN 8140, SAE MA3279-1411091732A818000091709A6720000091709A5750000090261A30300000092955A135000000————0
    M10 x 1 mm15 mm13/32"
    		0.406"DIN 8140, SAE MA3279-191591732A821000091709A6720000091709A5750000090261A30300000092955A1350000001091732A962000000
    M10 x 1 mm20 mm13/32"
    		0.406"SAE MA3279-241591732A823000091709A6720000091709A5750000090261A30300000092955A135000000————0
    M10 x 1.25 mm10 mm13/32"
    		0.406"DIN 8140, SAE MA3279-1101091732A803000091709A6530000091709A54500000090261A19700000092955A1350000001098356A167000000
    M10 x 1.25 mm15 mm13/32"
    		0.406"DIN 8140, SAE MA3279-1601091732A806000091709A6530000091709A54500000090261A19700000092955A1350000001091732A82200000
    M10 x 1.25 mm20 mm13/32"
    		0.406"DIN 8140, SAE MA3279-210591732A809000091709A6530000091709A54500000090261A19700000092955A135000000————0
    M10 x 1.25 mm25 mm10.25 mm
    		10.25 mmSAE MA3279-260592450A615000091709A6530000091709A54500000090261A19700000092955A135000000————0
    M10 x 1.5 mm10 mm10.5 mm
    		10.5 mmDIN 8140, SAE MA3279-1111091732A648000091709A2050000091709A5480000090261A19500000092955A1350000001098356A16300000
    M10 x 1.5 mm15 mm10.5 mm
    		10.5 mmDIN 8140, SAE MA3279-1611091732A265000091709A2050000091709A5480000090261A19500000092955A1350000001091732A95600000
    M10 x 1.5 mm20 mm10.5 mm
    		10.5 mmDIN 8140, SAE MA3279-211591732A800000091709A2050000091709A5480000090261A19500000092955A135000000598356A16400000
    M10 x 1.5 mm25 mm10.5 mm
    		10.5 mmDIN 8140, SAE MA3279-261591732A801000091709A2050000091709A5480000090261A19500000092955A135000000598356A165000000
    M10 x 1.5 mm30 mm10.5 mm
    		10.5 mmSAE MA3279-311591732A189000091709A2050000091709A5480000090261A19500000092955A135000000598356A166000000
    M12 x 1.25 mm12 mm31/64"
    		0.484"DIN 8140, SAE MA3279-1121091732A827000091709A6750000091709A55100000090261A30600000092955A137000000————0
    M12 x 1.25 mm18 mm31/64"
    		0.484"DIN 8140, SAE MA3279-162591732A830000091709A6750000091709A55100000090261A30600000092955A137000000591732A96400000
    M12 x 1.25 mm24 mm31/64"
    		0.484"DIN 8140, SAE MA3279-2121091732A8330000091709A6750000091709A55100000090261A30600000092955A137000000————0
    M12 x 1.5 mm12 mm12.5 mm
    		12.5 mmSAE MA3279-113192450A616000091709A6560000091709A5540000090261A18400000092955A137000000————0
    M12 x 1.5 mm18 mm12.5 mm
    		12.5 mmDIN 8140, SAE MA3279-163591732A301000091709A6560000091709A5540000090261A18400000092955A137000000591732A82400000
    M12 x 1.5 mm24 mm12.5 mm
    		12.5 mmSAE MA3279-213592450A617000091709A6560000091709A5540000090261A18400000092955A137000000————0
    M12 x 1.5 mm30 mm12.5 mm
    		12.5 mmSAE MA3279-263192450A618000091709A6560000091709A5540000090261A18400000092955A137000000————0
    M12 x 1.75 mm12 mm12.5 mm
    		12.5 mmDIN 8140, SAE MA3279-1141091732A653000091709A2060000091709A5570000090261A19600000092955A137000000————0
    M12 x 1.75 mm18 mm12.5 mm
    		12.5 mmDIN 8140, SAE MA3279-164591732A266000091709A2060000091709A5570000090261A19600000092955A137000000591732A96700000
    M12 x 1.75 mm24 mm12.5 mm
    		12.5 mmDIN 8140, SAE MA3279-214591732A812000091709A2060000091709A5570000090261A19600000092955A137000000————0
    M12 x 1.75 mm30 mm12.5 mm
    		12.5 mmDIN 8140, SAE MA3279-264591732A813000091709A2060000091709A5570000090261A19600000092955A137000000————0
    M14 x 1.5 mm21 mm37/64"
    		0.578"SAE MA3279-165591732A3030000091709A6590000091709A56000000090261A199000000———0591732A826000000
    M14 x 2 mm14 mm14.5 mm
    		14.5 mmDIN 8140, SAE MA3279-116591732A6580000091709A36800000091709A56300000090261A198000000———0————0
    M14 x 2 mm21 mm14.5 mm
    		14.5 mmDIN 8140, SAE MA3279-166191732A671000091709A36800000091709A56300000090261A198000000———01291732A068000000
    M16 x 1.5 mm24 mm21/32"
    		0.656"SAE MA3279-167692450A6190000092450A62100000092450A62200000092450A611000000———0————0
    M16 x 2 mm16 mm16.5 mm
    		16.5 mmDIN 8140, SAE MA3279-118191732A673000091709A3710000091709A56600000090261A208000000———0————0
    M16 x 2 mm24 mm16.5 mm
    		16.5 mmDIN 8140, SAE MA3279-168191732A675000091709A3710000091709A56600000090261A208000000———0691732A071000000
    M16 x 2 mm32 mm16.5 mm
    		16.5 mmDIN 8140, SAE MA3279-218191732A676000091709A3710000091709A56600000090261A208000000———0————0
    M18 x 2.5 mm18 mm47/64"
    		0.734"SAE MA3279-121191732A677000091709A37300000091709A56900000090261A312000000———0————0
    M18 x 2.5 mm27 mm47/64"
    		0.734"DIN 8140, SAE MA3279-171191732A679000091709A37300000091709A56900000090261A312000000———0691732A073000000
    M20 x 1.5 mm30 mm13/16"
    		0.813"SAE MA3279-172192450A111000092450A31100000092450A62300000092450A612000000———0————0
    M20 x 2.5 mm20 mm13/16"
    		0.813"DIN 8140, SAE MA3279-124191732A681000091709A37500000091709A57200000090261A212000000———0————0
    M20 x 2.5 mm30 mm13/16"
    		0.813"DIN 8140, SAE MA3279-174191732A683000091709A37500000091709A57200000090261A212000000———0491732A075000000
    M24 x 3 mm36 mm31/32"
    		0.969"SAE MA3279-179192450A125000092450A32500000091709A34000000092450A18900000———0591732A969000000
    M30 x 3.5 mm45 mm1 7/32"
    		1.219"SAE MA3279-183192450A145000092450A34500000091709A35000000092450A19200000———0591732A972000000
    M36 x 4 mm54 mm1 15/32"
    		36.1 mmSAE MA3279-187192450A1610000092450A36100000091709A36000000092450A19300000———0491732A975000000
     
    Nickel
    2-56
    		0.129"41 Ga.
    		0.096"—194264A305000091709A0980000091709A4010000090261A1400000092955A101000000————0
    6-32
    		0.138"25 Ga.
    		0.150"—194264A420000091709A1020000091709A4160000090261A15200000092955A10500000————0
    10-24
    		0.190"5 Ga.
    		0.206"—194264A430000091709A1040000091709A4280000090261A15400000092955A10900000————0
    10-24
    		0.380"5 Ga.
    		0.206"—194264A432000091709A1040000091709A4280000090261A15400000092955A10900000————0
    10-32
    		0.285"13/64"
    		0.203"—194264A477000091709A1510000091709A4310000090261A16100000092955A10900000————0
    1/4"-20
    		0.250"H
    		0.266"—194264A441000091709A1050000091709A4370000090261A15500000092955A11100000————0
    1/4"-20
    		0.375"H
    		0.266"—194264A445000091709A1050000091709A4370000090261A15500000092955A11100000————0
    5/16"-18
    		0.312"Q
    		0.332"—194264A451000091709A1060000091709A4430000090261A15600000092955A113000000————0
    5/16"-18
    		0.469"Q
    		0.332"—194264A454000091709A1060000091709A4430000090261A15600000092955A113000000————0
    5/16"-18
    		0.625"Q
    		0.332"—194264A4570000091709A1060000091709A4430000090261A15600000092955A113000000————0
    3/8"-16
    		0.375"X
    		0.397"—194264A462000091709A1070000091709A4490000090261A15700000092955A115000000————0
    3/8"-16
    		0.562"X
    		0.397"—194264A466000091709A1070000091709A4490000090261A15700000092955A115000000————0
    3/8"-16
    		0.750"X
    		0.397"—194264A4690000091709A1070000091709A4490000090261A15700000092955A115000000————0
    M3 x 0.5 mm3 mm3.2 mm
    		3.2 mm—194264A129000091709A3550000091709A5240000090261A18800000092955A155000000————0
    M3 x 0.5 mm6 mm3.2 mm
    		3.2 mm—194264A136000091709A3550000091709A5240000090261A18800000092955A155000000————0
    M4 x 0.7 mm4 mm4.25 mm
    		4.25 mm—194264A140000091709A3590000091709A5270000090261A19000000092955A160000000————0
    M4 x 0.7 mm6 mm4.25 mm
    		4.25 mm—194264A143000091709A3590000091709A5270000090261A19000000092955A160000000————0
    M4 x 0.7 mm8 mm4.25 mm
    		4.25 mm—194264A147000091709A3590000091709A5270000090261A19000000092955A160000000————0
    M5 x 0.8 mm7.5 mm5.3 mm
    		5.3 mm—194264A155000091709A2010000091709A5300000090261A19100000092955A12900000————0
    M5 x 0.8 mm10 mm5.3 mm
    		5.3 mm—194264A158000091709A2010000091709A5300000090261A19100000092955A12900000————0
    M6 x 1 mm9 mm6.3 mm
    		6.3 mm—194264A164000091709A2020000091709A5330000090261A19200000092955A13100000————0
    M6 x 1 mm12 mm6.3 mm
    		6.3 mm—194264A168000091709A2020000091709A5330000090261A19200000092955A13100000————0
    M8 x 1.25 mm8 mm8.4 mm
    		8.4 mm—194264A172000091709A2040000091709A5420000090261A19400000092955A133000000————0
    M8 x 1.25 mm12 mm8.4 mm
    		8.4 mm—194264A176000091709A2040000091709A5420000090261A19400000092955A133000000————0
    M8 x 1.25 mm16 mm8.4 mm
    		8.4 mm—194264A1830000091709A2040000091709A5420000090261A19400000092955A133000000————0
    M10 x 1.5 mm10 mm10.5 mm
    		10.5 mm—194264A1100000091709A2050000091709A5480000090261A19500000092955A135000000————0
    M10 x 1.5 mm15 mm10.5 mm
    		10.5 mm—194264A114000091709A2050000091709A5480000090261A19500000092955A135000000————0
     
    Ultra-Corrosion-Resistant Lightweight Titanium
    4-40
    		0.112"31 Ga.
    		0.120"—193332A230000091709A1010000091709A4070000090261A15100000092955A103000000————0
    4-40
    		0.168"31 Ga.
    		0.120"—193332A234000091709A1010000091709A4070000090261A15100000092955A103000000————0
    4-40
    		0.224"31 Ga.
    		0.120"—193332A238000091709A1010000091709A4070000090261A15100000092955A103000000————0
    6-32
    		0.207"25 Ga.
    		0.150"—193332A244000091709A1020000091709A4160000090261A15200000092955A10500000————0
    6-32
    		0.276"25 Ga.
    		0.150"—193332A246000091709A1020000091709A4160000090261A15200000092955A10500000————0
    10-24
    		0.190"5 Ga.
    		0.206"—193332A249000091709A1040000091709A4280000090261A15400000092955A10900000————0
    10-24
    		0.285"5 Ga.
    		0.206"—193332A255000091709A1040000091709A4280000090261A15400000092955A10900000————0
    10-24
    		0.380"5 Ga.
    		0.206"—193332A259000091709A1040000091709A4280000090261A15400000092955A10900000————0
    10-32
    		0.285"13/64"
    		0.203"—193332A265000091709A1510000091709A4310000090261A16100000092955A10900000————0
    10-32
    		0.380"13/64"
    		0.203"—193332A268000091709A1510000091709A4310000090261A16100000092955A10900000————0
    1/4"-20
    		0.250"H
    		0.266"—193332A273000091709A1050000091709A4370000090261A15500000092955A11100000————0
    1/4"-20
    		0.375"H
    		0.266"—193332A276000091709A1050000091709A4370000090261A15500000092955A11100000————0
    1/4"-20
    		0.500"H
    		0.266"—193332A279000091709A1050000091709A4370000090261A15500000092955A11100000————0
    5/16"-18
    		0.312"Q
    		0.332"—193332A2810000091709A1060000091709A4430000090261A15600000092955A113000000————0
    5/16"-18
    		0.469"Q
    		0.332"—193332A2850000091709A1060000091709A4430000090261A15600000092955A113000000————0
    5/16"-18
    		0.625"Q
    		0.332"—193332A2900000091709A1060000091709A4430000090261A15600000092955A113000000————0
    3/8"-16
    		0.375"X
    		0.397"—193332A2930000091709A1070000091709A4490000090261A15700000092955A115000000————0
    3/8"-16
    		0.562"X
    		0.397"—193332A2960000091709A1070000091709A4490000090261A15700000092955A115000000————0
    3/8"-16
    		0.750"X
    		0.397"—193332A299000091709A1070000091709A4490000090261A15700000092955A115000000————0
     
    Prongless
    Image of Product. Prongless. Bottom orientation. Threaded Inserts. Helical Threaded Inserts, Prongless.

    Prongless

     
    18-8 Stainless Steel
    0-80
    		0.060"52 Ga.
    		0.064"—591990A501000091709A6810000091709A6820000091049A103000000———0————0
    0-80
    		0.090"52 Ga.
    		0.064"—591990A502000091709A6810000091709A6820000091049A103000000———0————0
    0-80
    		0.120"52 Ga.
    		0.064"—591990A503000091709A6810000091709A6820000091049A103000000———0————0
    1-64
    		0.073"46 Ga.
    		0.081"—591990A504000091709A0900000091709A6830000091049A101000000———0————0
    1-64
    		0.110"46 Ga.
    		0.081"—591990A505000091709A0900000091709A6830000091049A101000000———0————0
    1-64
    		0.146"46 Ga.
    		0.081"—591990A506000091709A0900000091709A6830000091049A101000000———0————0
    2-56
    		0.086"41 Ga.
    		0.096"NAS1130-02-101091990A201000091709A0980000091709A4010000091049A601000000———0————0
    2-56
    		0.129"41 Ga.
    		0.096"NAS1130-02-151091990A204000091709A0980000091709A4010000091049A601000000———0————0
    2-56
    		0.172"41 Ga.
    		0.096"NAS1130-02-201091990A207000091709A0980000091709A4010000091049A601000000———0————0
    2-56
    		0.215"3/32"
    		0.094"NAS1130-02-251091990A519000091709A0980000091709A4010000091049A601000000———0————0
    2-56
    		0.258"3/32"
    		0.094"NAS1130-02-301091990A520000091709A0980000091709A4010000091049A601000000———0————0
    4-40
    		0.112"31 Ga.
    		0.120"NAS1130-04-101091990A210000091709A1010000091709A4070000091049A604000000———0————0
    4-40
    		0.168"31 Ga.
    		0.120"NAS1130-04-151091990A213000091709A1010000091709A4070000091049A604000000———0————0
    4-40
    		0.224"31 Ga.
    		0.120"NAS1130-04-201091990A216000091709A1010000091709A4070000091049A604000000———0————0
    4-40
    		0.280"31 Ga.
    		0.120"NAS1130-04-251091990A521000091709A1010000091709A4070000091049A604000000———0————0
    4-40
    		0.336"31 Ga.
    		0.120"NAS1130-04-301091990A522000091709A1010000091709A4070000091049A604000000———0————0
    6-32
    		0.138"25 Ga.
    		0.150"NAS1130-06-101091990A219000091709A1020000091709A4160000091049A607000000———0————0
    6-32
    		0.207"25 Ga.
    		0.150"NAS1130-06-151091990A222000091709A1020000091709A4160000091049A607000000———0————0
    6-32
    		0.276"25 Ga.
    		0.150"NAS1130-06-201091990A225000091709A1020000091709A4160000091049A607000000———0————0
    6-32
    		0.345"26 Ga.
    		0.147"NAS1130-06-251091990A523000091709A1020000091709A4160000091049A607000000———0————0
    6-32
    		0.414"26 Ga.
    		0.147"NAS1130-06-301091990A524000091709A1020000091709A4160000091049A607000000———0————0
    8-32
    		0.164"16 Ga.
    		0.177"NAS1130-08-101091990A228000091709A1030000091709A4220000091049A610000000———0————0
    8-32
    		0.246"16 Ga.
    		0.177"NAS1130-08-151091990A231000091709A1030000091709A4220000091049A610000000———0————0
    8-32
    		0.328"16 Ga.
    		0.177"NAS1130-08-201091990A234000091709A1030000091709A4220000091049A610000000———0————0
    8-32
    		0.414"17 Ga.
    		0.173"NAS1130-08-251091990A525000091709A1030000091709A4220000091049A610000000———0————0
    8-32
    		0.492"17 Ga.
    		0.173"NAS1130-08-301091990A526000091709A1030000091709A4220000091049A610000000———0————0
    10-24
    		0.190"5 Ga.
    		0.206"NAS1130-3C-101091990A237000091709A1040000091709A4280000091049A613000000———0————0
    10-24
    		0.285"5 Ga.
    		0.206"NAS1130-3C-151091990A240000091709A1040000091709A4280000091049A613000000———0————0
    10-24
    		0.380"5 Ga.
    		0.206"NAS1130-3C-201091990A243000091709A1040000091709A4280000091049A613000000———0————0
    10-24
    		0.475"13/64"
    		0.203"NAS1130-3C-251091990A527000091709A1040000091709A4280000091049A613000000———0————0
    10-24
    		0.570"13/64"
    		0.203"NAS1130-3C-301091990A528000091709A1040000091709A4280000091049A613000000———0————0
    10-32
    		0.190"13/64"
    		0.203"NAS1130-3-101091990A246000091709A1510000091709A4310000091049A812000000———0————0
    10-32
    		0.285"13/64"
    		0.203"NAS1130-3-151091990A249000091709A1510000091709A4310000091049A812000000———0————0
    10-32
    		0.380"13/64"
    		0.203"NAS1130-3-201091990A252000091709A1510000091709A4310000091049A812000000———0————0
    10-32
    		0.475"13/64"
    		0.203"NAS1130-3-251091990A541000091709A1510000091709A4310000091049A812000000———0————0
    10-32
    		0.570"13/64"
    		0.203"NAS1130-3-301091990A542000091709A1510000091709A4310000091049A812000000———0————0
    1/4"-20
    		0.250"H
    		0.266"NAS1130-4-101091990A255000091709A1050000091709A4370000091049A619000000———0————0
    1/4"-20
    		0.375"H
    		0.266"NAS1130-4-151091990A258000091709A1050000091709A4370000091049A619000000———0————0
    1/4"-20
    		0.500"H
    		0.266"NAS1130-4-201091990A261000091709A1050000091709A4370000091049A619000000———0————0
    1/4"-20
    		0.625"17/64"
    		0.266"NAS1130-4-251091990A529000091709A1050000091709A4370000091049A619000000———0————0
    1/4"-20
    		0.750"17/64"
    		0.266"NAS1130-4-301091990A530000091709A1050000091709A4370000091049A619000000———0————0
    1/4"-28
    		0.250"17/64"
    		0.266"NAS1130-4F-101091990A543000091709A1520000091709A4400000091049A109000000———0————0
    1/4"-28
    		0.375"17/64"
    		0.266"NAS1130-4F-151091990A544000091709A1520000091709A4400000091049A109000000———0————0
    1/4"-28
    		0.500"17/64"
    		0.266"NAS1130-4F-201091990A545000091709A1520000091709A4400000091049A109000000———0————0
    1/4"-28
    		0.625"17/64"
    		0.266"NAS1130-4F-251091990A546000091709A1520000091709A4400000091049A109000000———0————0
    5/16"-18
    		0.312"21/64"
    		0.328"NAS1130-5C-101091990A531000091709A1060000091709A4430000091049A107000000———0————0
    5/16"-18
    		0.469"21/64"
    		0.328"NAS1130-5C-151091990A532000091709A1060000091709A4430000091049A107000000———0————0
    5/16"-18
    		0.625"21/64"
    		0.328"NAS1130-5C-201091990A533000091709A1060000091709A4430000091049A107000000———0————0
    5/16"-18
    		0.781"21/64"
    		0.328"NAS1130-5C-251091990A534000091709A1060000091709A4430000091049A107000000———0————0
    5/16"-18
    		0.938"21/64"
    		0.328"NAS1130-5C-301091990A535000091709A1060000091709A4430000091049A107000000———0————0
    5/16"-24
    		0.312"21/64"
    		0.328"NAS1130-5F-101091990A547000091709A1530000091709A4460000091049A110000000———0————0
    5/16"-24
    		0.468"21/64"
    		0.328"NAS1130-5F-151091990A548000091709A1530000091709A4460000091049A110000000———0————0
    5/16"-24
    		0.624"21/64"
    		0.328"NAS1130-5F-201091990A549000091709A1530000091709A4460000091049A110000000———0————0
    3/8"-16
    		0.375"25/64"
    		0.391"NAS1130-6C-101091990A536000091709A1070000091709A4490000091049A108000000———0————0
    3/8"-16
    		0.562"25/64"
    		0.391"NAS1130-6C-151091990A537000091709A1070000091709A4490000091049A108000000———0————0
    3/8"-16
    		0.750"25/64"
    		0.391"NAS1130-6C-201091990A538000091709A1070000091709A4490000091049A108000000———0————0
    3/8"-16
    		0.938"25/64"
    		0.391"NAS1130-6C-251091990A539000091709A1070000091709A4490000091049A108000000———0————0
    3/8"-16
    		1.125"25/64"
    		0.391"NAS1130-6C-301091990A540000091709A1070000091709A4490000091049A108000000———0————0
    3/8"-24
    		0.375"25/64"
    		0.391"NAS1130-6F-101091990A550000091709A1540000091709A4520000091049A111000000———0————0
    3/8"-24
    		0.563"25/64"
    		0.391"NAS1130-6F-151091990A551000091709A1540000091709A4520000091049A111000000———0————0
    3/8"-24
    		0.750"25/64"
    		0.391"NAS1130-6F-201091990A552000091709A1540000091709A4520000091049A111000000———0————0
    3/8"-24
    		0.938"25/64"
    		0.391"—1091990A553000091709A1540000091709A4520000091049A111000000———0————0
    M2 x 0.4 mm2 mm2.1 mm
    		2.1 mm—591990A507000091709A24000000091709A23000000091049A102000000———0————0
    M2 x 0.4 mm3 mm2.1 mm
    		2.1 mm—591990A508000091709A24000000091709A23000000091049A102000000———0————0
    M2 x 0.4 mm4 mm2.1 mm
    		2.1 mm—591990A509000091709A24000000091709A23000000091049A102000000———0————0
    M2.5 x 0.45 mm2.5 mm37 Ga.
    		0.104"NA0276M2A-101091990A401000091709A6780000091709A5780000091049A620000000———0————0
    M2.5 x 0.45 mm3.8 mm37 Ga.
    		0.104"NA0276M2A-151091990A404000091709A6780000091709A5780000091049A620000000———0————0
    M2.5 x 0.45 mm5 mm37 Ga.
    		0.104"NA0276M2A-201091990A407000091709A6780000091709A5780000091049A620000000———0————0
    M2.5 x 0.45 mm6.3 mm37 Ga.
    		0.104"NA0276M2-251091990A554000091709A6780000091709A5780000091049A620000000———0————0
    M3 x 0.5 mm3 mm3.2 mm
    		3.2 mmNA0276M3-101091990A408000091709A3550000091709A5240000091049A622000000———0————0
    M3 x 0.5 mm4.5 mm3.2 mm
    		3.2 mmNA0276M3-151091990A410000091709A3550000091709A5240000091049A622000000———0————0
    M3 x 0.5 mm6 mm3.2 mm
    		3.2 mmNA0276M3-201091990A412000091709A3550000091709A5240000091049A622000000———0————0
    M4 x 0.7 mm4 mm19 Ga.
    		0.166"NA0276M4-101091990A413000091709A3590000091709A5270000091049A624000000———0————0
    M4 x 0.7 mm6 mm19 Ga.
    		0.166"NA0276M4-151091990A416000091709A3590000091709A5270000091049A624000000———0————0
    M4 x 0.7 mm8 mm19 Ga.
    		0.166"NA0276M4-201091990A419000091709A3590000091709A5270000091049A624000000———0————0
    M5 x 0.8 mm5 mm5.3 mm
    		5.3 mmNA0276M5-101091990A422000091709A2010000091709A5300000091049A626000000———0————0
    M5 x 0.8 mm7.5 mm5.3 mm
    		5.3 mmNA0276M5-151091990A425000091709A2010000091709A5300000091049A626000000———0————0
    M5 x 0.8 mm10 mm5.3 mm
    		5.3 mmNA0276M5-201091990A428000091709A2010000091709A5300000091049A626000000———0————0
    M6 x 1 mm6 mm6.3 mm
    		6.3 mmNA0276M6-101091990A429000091709A2020000091709A5330000091049A628000000———0————0
    M6 x 1 mm9 mm6.3 mm
    		6.3 mmNA0276M6-151091990A434000091709A2020000091709A5330000091049A628000000———0————0
    M6 x 1 mm12 mm6.3 mm
    		6.3 mmNA0276M6-201091990A437000091709A2020000091709A5330000091049A628000000———0————0
    M8 x 1.25 mm8 mm8.4 mm
    		8.4 mmNA0276M8-101091990A510000091709A2040000091709A5420000091049A104000000———0————0
    M8 x 1.25 mm12 mm8.4 mm
    		8.4 mmNA0276M8-151091990A511000091709A2040000091709A5420000091049A104000000———0————0
    M8 x 1.25 mm16 mm8.4 mm
    		8.4 mmNA0276M8-201091990A512000091709A2040000091709A5420000091049A104000000———0————0
    M10 x 1.5 mm10 mm10.5 mm
    		10.5 mmNA0276M10-101091990A513000091709A2050000091709A5480000091049A105000000———0————0
    M10 x 1.5 mm15 mm10.5 mm
    		10.5 mmNA0276M10-15591990A514000091709A2050000091709A5480000091049A105000000———0————0
    M10 x 1.5 mm20 mm10.5 mm
    		10.5 mmNA0276M10-20591990A515000091709A2050000091709A5480000091049A105000000———0————0
    M12 x 1.75 mm12 mm12.5 mm
    		12.5 mmNA0276M12-10591990A516000091709A2060000091709A5570000091049A106000000———0————0
    M12 x 1.75 mm18 mm12.5 mm
    		12.5 mmNA0276M12-15591990A517000091709A2060000091709A5570000091049A106000000———0————0
    M12 x 1.75 mm24 mm12.5 mm
    		12.5 mmNA0276M12-20591990A518000091709A2060000091709A5570000091049A106000000———0————0
     
    Extraction Tools
    Remove installed helical inserts.
    For Pronged Helical Inserts—Place the tip into pronged inserts and lightly strike the tool’s head. Then, turn the tool counterclockwise with pressure to extract the insert.
    For Prongless Helical Inserts—Remove prongless inserts without damaging threads or the surface of your material. These tools also back out or adjust inserts that are installed too deep.
    For Thread Size
    Each
    For Pronged Helical Inserts
    1-64, 1-72, M2
    		90254A3700000000
    2-56, 2-64, M2.2
    		90254A29000000
    3-48, 3-56, 4-40, 4-48, 5-40, 5-44, 6-32, 6-40, 8-32, 8-36, 8-40, M2.5, M3, M3.5, M4
    		90254A31000000
    10-24, 10-32, 12-24, 12-28, 1/4"-20, 1/4"-28, 1/4"-32, 1/4"-80, 5/16"-18, 5/16"-24, 5/16"-32, 3/8"-16, 3/8"-24, M5, M6, M7, M8, M10
    		90254A32000000
    7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 1/2"-28, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 5/8"-24, 3/4"-10, 3/4"-16, 3/4"-20, 7/8"-9, 7/8"-14, 7/8"-20, 1"-8, 1"-12, 1"-14, M12, M14, M16, M18, M20, M22, M24
    		90254A33000000
    1 1/8"-7, 1 1/8"-12, 1 1/4"-7, 1 1/4"-8, 1 1/4"-12, 1 3/8"-6, 1 3/8"-12, 1 1/2"-6, 1 1/2"-8, 1 1/2"-12, M27, M30, M36, M39
    		90254A360000000
     
    For Prongless Helical Inserts
    0-80
    		91049A376000000
    1-64
    		91049A377000000
    2-56
    		91049A631000000
    4-40
    		91049A634000000
    6-32
    		91049A637000000
    8-32
    		91049A640000000
    10-24
    		91049A643000000
    10-32
    		91049A646000000
    1/4"-20
    		91049A649000000
    1/4"-28
    		91049A653000000
    5/16"-18
    		91049A651000000
    5/16"-24
    		91049A654000000
    3/8"-16
    		91049A652000000
    3/8"-24
    		91049A655000000
    M2
    		91049A378000000
    M2.5
    		91049A362000000
    M3
    		91049A364000000
    M4
    		91049A366000000
    M5
    		91049A368000000
    M6
    		91049A370000000
    M8
    		91049A379000000
    M10
    		91049A380000000
    M12
    		91049A381000000
     

    Key-Locking Threaded Inserts for Soft Metal

    Image of Product. Bottom orientation. Threaded Inserts. Key-Locking Threaded Inserts for Soft Metal.
    Add strong threads in soft metal, such as aluminum. The keys on these inserts drive into holes to hold more securely than thread-locking or helical inserts. They prevent slipping and rotating, so they’re stable enough for use in vehicle or aerospace parts that experience heavy vibration. These inserts are comparable to Keensert inserts.
    To install, drill and tap a hole in your material. Then, thread the insert onto the installation tool and screw it into the hole. Place the tool over the keys and hit it with a hammer to drive them in.
    Standard Wall—Stronger than thin-wall inserts, these are your go-to choice for threading most holes.
    Thin Wall—Use these inserts near the edge of workpieces or wherever you only have space for a small hole. They're also lighter than standard and extra-thick wall inserts for applications with strict weight limitations.
    Extra-Thick Wall—Stronger than standard- and thin-wall inserts, use them to reduce the size of tapped holes or replace threads that have been drilled out.
    Black Phosphate-Coated Steel—These inserts resist occasional moisture.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    High-Strength High-Temperature A286 Stainless Steel—High temperatures won't reduce the load capacity of these inserts. They also resist chemicals such as bleach and chlorine.
    Inserts
    Installation
    Tools
    Inserts with
    Installation Tools
    Thread Size
    For Tap Thread
    Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    No. of Locking
    Keys
    Specs. Met
    Each
    Each
    No. of Inserts
    Included
    Each
    Standard Wall
     
    Black Phosphate-Coated Steel
    8-32
    		5/16"-18
    		0.313"I
    		0.272"2—90245A0690000092100A708000000990245A049000000
    10-24
    		3/8"-16
    		0.313"Q
    		0.332"2—90245A031000092100A70900000990245A01100000
    10-32
    		3/8"-16
    		0.313"Q
    		0.332"2—90245A071000092100A70900000990245A05100000
    1/4"-20
    		7/16"-14
    		0.375"X
    		0.397"2—90245A032000092100A71100000890245A01200000
    1/4"-28
    		7/16"-14
    		0.375"X
    		0.397"2—90245A072000092100A71100000890245A05200000
    5/16"-18
    		1/2"-13
    		0.438"29/64"
    		0.453"4—90245A033000092100A71500000790245A01300000
    5/16"-24
    		1/2"-13
    		0.438"29/64"
    		0.453"4—90245A073000092100A71500000790245A05300000
    3/8"-16
    		9/16"-12
    		0.500"33/64"
    		0.516"4—90245A034000092100A71700000690245A01400000
    3/8"-24
    		9/16"-12
    		0.500"33/64"
    		0.516"4—90245A074000092100A71700000690245A05400000
    7/16"-14
    		5/8"-11
    		0.625"37/64"
    		0.578"4—90245A035000092100A72100000690245A01500000
    7/16"-20
    		5/8"-11
    		0.625"37/64"
    		0.578"4—90245A075000092100A72100000690245A05500000
    1/2"-13
    		3/4"-16
    		0.625"45/64"
    		0.703"4—90245A036000092100A72300000490245A01600000
    1/2"-20
    		3/4"-16
    		0.625"45/64"
    		0.703"4—90245A076000092100A72300000490245A05600000
    9/16"-12
    		3/4"-16
    		0.813"45/64"
    		0.703"4—90245A037000092100A72500000390245A01700000
    9/16"-18
    		3/4"-16
    		0.813"45/64"
    		0.703"4—90245A077000092100A72500000390245A05700000
    5/8"-11
    		7/8"-14
    		0.875"53/64"
    		0.828"4—90245A038000092100A73100000390245A01800000
    5/8"-18
    		7/8"-14
    		0.875"53/64"
    		0.828"4—90245A078000092100A73100000390245A05800000
    3/4"-10
    		1 1/8"-12
    		1.125"1 1/16"
    		1.063"4—90245A0390000092100A73500000390245A01900000
    3/4"-16
    		1 1/8"-12
    		1.125"1 1/16"
    		1.063"4—90245A0790000092100A73500000390245A05900000
    7/8"-9
    		1 1/4"-12
    		1.250"1 3/16"
    		1.188"4—90245A0410000092100A73900000390245A02100000
    7/8"-14
    		1 1/4"-12
    		1.250"1 3/16"
    		1.188"4—90245A0810000092100A73900000390245A06100000
    1"-8
    		1 3/8"-12
    		1.375"1 5/16"
    		1.313"4—90245A0420000092100A74400000290245A02200000
    1"-12
    		1 3/8"-12
    		1.375"1 5/16"
    		1.313"4—90245A0820000092100A74400000290245A06200000
    1"-14
    		1 3/8"-12
    		1.375"1 5/16"
    		1.313"4—90245A0850000092100A74400000290245A07000000
    1 1/8"-7
    		1 1/2"-12
    		1.438"1 7/16"
    		1.438"4—90245A0910000092100A749000000290245A063000000
    1 1/8"-12
    		1 1/2"-12
    		1.438"1 7/16"
    		1.438"4—90245A0960000092100A749000000————0
    1 1/4"-7
    		1 5/8"-12
    		1.813"—1.563"4—90245A1010000092100A754000000290245A065000000
    1 1/4"-12
    		1 5/8"-12
    		1.813"—1.563"4—90245A1040000092100A754000000290245A066000000
    1 1/2"-6
    		1 7/8"-12
    		2"—1.813"4—90245A10800000092100A758000000290245A067000000
    1 1/2"-12
    		1 7/8"-12
    		2"—1.813"4—90245A11300000092100A758000000————0
    M4 x 0.7 mmM8 x 1.25 mm8 mm6.9 mm
    		6.9 mm2—90245A2810000094010A45500000————0
    M5 x 0.8 mmM10 x 1.25 mm10 mm8.8 mm
    		8.8 mm2—90245A2820000094010A46500000————0
    M6 x 1 mm3/8"-16
    		0.310"Q
    		0.332"2—90699A310000090699A54500000890699A11000000
    M6 x 1 mmM12 x 1.25 mm12 mm10.8 mm
    		10.8 mm2—90245A2830000094010A47500000————0
    M8 x 1 mmM14 x 1.5 mm14 mm12.8 mm
    		12.8 mm4—90245A3470000094010A48500000————0
    M8 x 1.25 mm1/2"-13
    		0.430"29/64"
    		0.453"4—90699A3150000090699A55000000890699A11500000
    M8 x 1.25 mmM14 x 1.5 mm14 mm12.8 mm
    		12.8 mm4—90245A2840000094010A48500000————0
    M10 x 1.25 mmM16 x 1.5 mm16 mm14.75 mm
    		14.75 mm4—90245A3480000094010A49500000————0
    M10 x 1.5 mm5/8"-11
    		0.500"37/64"
    		0.578"4—90699A320000090699A55500000690699A12000000
    M10 x 1.5 mmM16 x 1.5 mm16 mm14.75 mm
    		14.75 mm4—90245A2850000094010A49500000————0
    M12 x 1.25 mmM18 x 1.5 mm18 mm16.75 mm
    		16.75 mm4—90245A3510000090699A62300000————0
    M12 x 1.75 mm3/4"-16
    		0.620"45/64"
    		0.703"4—90699A3250000090699A56000000490699A12500000
    M12 x 1.75 mmM18 x 1.5 mm18 mm16.75 mm
    		16.75 mm4—90245A3490000090699A62300000————0
    M14 x 1.5 mmM20 x 1.5 mm20 mm18.75 mm
    		18.75 mm4—90245A1850000094010A34000000490245A30600000
    M14 x 2 mm7/8"-14
    		0.810"53/64"
    		0.828"4—90699A3300000090699A56500000390699A13000000
    M14 x 2 mmM20 x 1.5 mm20 mm18.75 mm
    		18.75 mm4—90245A1860000094010A34000000490245A30100000
    M16 x 1.5 mmM22 x 1.5 mm22 mm20.5 mm
    		20.5 mm4—90245A1930000094010A34500000390245A31600000
    M16 x 2 mm1"-12
    		0.870"15/16"
    		0.938"4—90699A3350000090699A57000000390699A13500000
    M16 x 2 mmM22 x 1.5 mm22 mm20.5 mm
    		20.5 mm4—90245A1890000094010A34500000390245A31100000
    M18 x 1.5 mmM24 x 1.5 mm24 mm22.5 mm
    		22.5 mm4—90245A1970000094010A35000000290245A32100000
    M20 x 1.5 mmM30 x 2 mm30 mm28 mm
    		28 mm4—90245A2050000094010A35500000390245A33100000
    M20 x 2.5 mmM30 x 2 mm30 mm28 mm
    		28 mm4—90245A2010000094010A35500000390245A32600000
    M22 x 1.5 mmM32 x 2 mm32 mm30 mm
    		30 mm4—90245A2090000094010A36000000390245A336000000
    M24 x 2 mmM33 x 2 mm33 mm31 mm
    		31 mm4—90245A2170000094010A36500000————0
    M24 x 3 mmM33 x 2 mm33 mm31 mm
    		31 mm4—90245A2130000094010A36500000290245A341000000
     
    18-8 Stainless Steel
    8-32
    		5/16"-18
    		0.313"I
    		0.272"2—91731A047000092100A70800000991731A00700000
    10-24
    		3/8"-16
    		0.313"Q
    		0.332"2—91731A051000092100A70900000991731A01100000
    10-32
    		3/8"-16
    		0.313"Q
    		0.332"2—91731A049000092100A70900000991731A00900000
    1/4"-20
    		7/16"-14
    		0.375"X
    		0.397"2—91731A052000092100A71100000891731A01200000
    1/4"-28
    		7/16"-14
    		0.375"X
    		0.397"2—91731A064000092100A71100000891731A02600000
    5/16"-18
    		1/2"-13
    		0.438"29/64"
    		0.453"4—91731A053000092100A71500000791731A01300000
    5/16"-24
    		1/2"-13
    		0.438"29/64"
    		0.453"4—91731A0710000092100A71500000791731A02700000
    3/8"-16
    		9/16"-12
    		0.500"33/64"
    		0.516"4—91731A054000092100A71700000691731A01400000
    3/8"-24
    		9/16"-12
    		0.500"33/64"
    		0.516"4—91731A065000092100A71700000691731A02500000
    7/16"-14
    		5/8"-11
    		0.625"37/64"
    		0.578"4—91731A0550000092100A72100000691731A01500000
    7/16"-20
    		5/8"-11
    		0.625"37/64"
    		0.578"4—91731A0660000092100A72100000691731A03100000
    1/2"-13
    		3/4"-16
    		0.625"45/64"
    		0.703"4—91731A0610000092100A72300000491731A01900000
    1/2"-20
    		3/4"-16
    		0.625"45/64"
    		0.703"4—91731A0220000092100A72300000491731A04800000
    9/16"-12
    		3/4"-16
    		0.813"45/64"
    		0.703"4—91731A0570000092100A72500000391731A01700000
    9/16"-18
    		3/4"-16
    		0.813"45/64"
    		0.703"4—91731A0670000092100A72500000391731A03300000
    5/8"-11
    		7/8"-14
    		0.875"53/64"
    		0.828"4—91731A0580000092100A73100000391731A01800000
    5/8"-18
    		7/8"-14
    		0.875"53/64"
    		0.828"4—91731A0680000092100A73100000391731A07000000
    3/4"-10
    		1 1/8"-12
    		1.125"1 1/16"
    		1.063"4—91731A0630000092100A73500000391731A023000000
    3/4"-16
    		1 1/8"-12
    		1.125"1 1/16"
    		1.063"4—91731A0690000092100A73500000391731A035000000
    7/8"-9
    		1 1/4"-12
    		1.250"1 3/16"
    		1.188"4—91731A0740000092100A73900000391731A038000000
    7/8"-14
    		1 1/4"-12
    		1.250"1 3/16"
    		1.188"4—91731A0790000092100A73900000————0
    1"-8
    		1 3/8"-12
    		1.375"1 5/16"
    		1.313"4—91731A0830000092100A74400000291731A044000000
    1"-12
    		1 3/8"-12
    		1.375"1 5/16"
    		1.313"4—91731A0880000092100A74400000————0
    M4 x 0.7 mmM8 x 1.25 mm8 mm6.9 mm
    		6.9 mm2—93715A3550000094010A45500000————0
    M5 x 0.8 mmM10 x 1.25 mm10 mm8.8 mm
    		8.8 mm2—93715A3650000094010A46500000————0
    M6 x 1 mm3/8"-16
    		0.310"Q
    		0.332"2—93930A2100000090699A54500000————0
    M6 x 1 mmM12 x 1.25 mm12 mm10.8 mm
    		10.8 mm2—93715A3750000094010A47500000————0
    M8 x 1 mmM14 x 1.5 mm14 mm12.8 mm
    		12.8 mm4—93340A1010000094010A48500000————0
    M8 x 1.25 mm1/2"-13
    		0.430"29/64"
    		0.453"4—93930A2110000090699A55000000————0
    M8 x 1.25 mmM14 x 1.5 mm14 mm12.8 mm
    		12.8 mm4—93715A3850000094010A48500000————0
    M10 x 1.25 mmM16 x 1.5 mm16 mm14.75 mm
    		14.75 mm4—93340A1020000094010A49500000————0
    M10 x 1.5 mm5/8"-11
    		0.500"37/64"
    		0.578"4—93930A2120000090699A55500000————0
    M10 x 1.5 mmM16 x 1.5 mm16 mm14.75 mm
    		14.75 mm4—93715A3950000094010A49500000————0
    M12 x 1.25 mmM18 x 1.5 mm18 mm16.75 mm
    		16.75 mm4—93340A1040000090699A62300000————0
    M12 x 1.75 mm3/4"-16
    		0.620"45/64"
    		0.703"4—93930A2130000090699A56000000————0
    M12 x 1.75 mmM18 x 1.5 mm18 mm16.75 mm
    		16.75 mm4—93340A1030000090699A62300000————0
    M14 x 1.5 mmM20 x 1.5 mm20 mm18.75 mm
    		18.75 mm4—93715A6500000094010A34000000————0
    M14 x 2 mm7/8"-14
    		0.810"53/64"
    		0.828"4—93930A2140000090699A56500000————0
    M14 x 2 mmM20 x 1.5 mm20 mm18.75 mm
    		18.75 mm4—93715A6450000094010A34000000493715A455000000
    M16 x 1.5 mmM22 x 1.5 mm22 mm20.5 mm
    		20.5 mm4—93715A6600000094010A34500000393715A470000000
    M16 x 2 mm1"-12
    		0.870"15/16"
    		0.938"4—93930A2150000090699A57000000————0
    M16 x 2 mmM22 x 1.5 mm22 mm20.5 mm
    		20.5 mm4—93715A6550000094010A34500000393715A465000000
    M18 x 1.5 mmM24 x 1.5 mm24 mm22.5 mm
    		22.5 mm4—93715A6650000094010A35000000293715A475000000
    M20 x 1.5 mmM30 x 2 mm30 mm28 mm
    		28 mm4—93715A6750000094010A35500000393715A485000000
    M20 x 2.5 mmM30 x 2 mm30 mm28 mm
    		28 mm4—93715A6700000094010A35500000393715A480000000
    M22 x 1.5 mmM32 x 2 mm32 mm30 mm
    		30 mm4—93715A6800000094010A36000000————0
    M24 x 3 mmM33 x 2 mm33 mm31 mm
    		31 mm4—93715A6850000094010A36500000————0
     
    High-Strength High-Temperature A286 Stainless Steel
    8-32
    		5/16"-18
    		0.313"I
    		0.272"2—93509A2400000093904A50500000————0
    10-32
    		3/8"-16
    		0.313"Q
    		0.332"2MS51831CA20193509A25000000———0————0
    1/4"-20
    		7/16"-14
    		0.375"X
    		0.397"2MS51831CA10293509A2600000093904A52500000————0
    1/4"-28
    		7/16"-14
    		0.375"X
    		0.397"2MS51831CA20293509A27000000———0————0
    5/16"-24
    		1/2"-13
    		0.438"29/64"
    		0.453"4MS51831CA20393509A28000000———0————0
    3/8"-16
    		9/16"-12
    		0.500"33/64"
    		0.516"4MS51831CA10493509A2900000093904A54500000————0
    3/8"-24
    		9/16"-12
    		0.500"33/64"
    		0.516"4MS51831CA20493509A31000000———0————0
    5/8"-18
    		7/8"-14
    		0.875"53/64"
    		0.828"4MS51831CA20893509A32000000———0————0
     
    Thin Wall
     
    Black Phosphate-Coated Steel
    10-24
    		5/16"-18
    		0.313"I
    		0.272"2—92070A110000093875A00100000992070A30600000
    10-32
    		5/16"-18
    		0.313"I
    		0.272"2—92070A240000093875A00100000992070A31200000
    1/4"-20
    		3/8"-16
    		0.375"Q
    		0.332"2—92070A115000093875A01000000892070A31900000
    1/4"-28
    		3/8"-16
    		0.375"Q
    		0.332"2—92070A245000093875A01000000892070A32500000
    5/16"-18
    		7/16"-14
    		0.438"X
    		0.397"4—92070A120000093875A01500000792070A33100000
    5/16"-24
    		7/16"-14
    		0.438"X
    		0.397"4—92070A250000093875A01500000792070A33700000
    3/8"-16
    		1/2"-13
    		0.500"29/64"
    		0.453"4—92070A125000093875A02000000692070A34400000
    3/8"-24
    		1/2"-13
    		0.500"29/64"
    		0.453"4—92070A255000093875A02000000692070A35000000
    7/16"-14
    		9/16"-12
    		0.563"33/64"
    		0.516"4—92070A130000093875A02500000692070A35700000
    7/16"-20
    		9/16"-12
    		0.563"33/64"
    		0.516"4—92070A260000093875A02500000692070A36300000
    1/2"-13
    		5/8"-11
    		0.625"37/64"
    		0.578"4—92070A135000093875A03000000492070A37000000
    1/2"-20
    		5/8"-11
    		0.625"37/64"
    		0.578"4—92070A265000093875A03000000492070A37600000
    M5 x 0.8 mmM8 x 1.25 mm8 mm6.9 mm
    		6.9 mm2—90245A161000094010A31000000890245A16000000
    M6 x 1 mmM10 x 1.25 mm10 mm8.8 mm
    		8.8 mm2—90245A171000094010A32500000890245A16200000
    M8 x 1 mmM12 x 1.25 mm12 mm10.8 mm
    		10.8 mm4—90245A172000094010A31500000690245A16300000
    M8 x 1.25 mmM12 x 1.25 mm12 mm10.8 mm
    		10.8 mm4—90245A173000094010A31500000690245A16400000
    M10 x 1.25 mmM14 x 1.5 mm14 mm12.8 mm
    		12.8 mm4—90245A174000094010A33000000490245A16500000
    M10 x 1.5 mmM14 x 1.5 mm14 mm12.8 mm
    		12.8 mm4—90245A175000094010A33000000490245A16600000
    M12 x 1.25 mmM16 x 1.5 mm16 mm14.75 mm
    		14.75 mm4—90245A178000094010A32000000390245A16900000
    M12 x 1.75 mmM16 x 1.5 mm16 mm14.75 mm
    		14.75 mm4—90245A177000094010A32000000390245A16800000
     
    18-8 Stainless Steel
    0-80
    		6-40
    		0.109"31 Ga.
    		0.120"2—93340A901000006721N1100000————0
    2-56
    		6-40
    		0.109"31 Ga.
    		0.120"2—93340A9020000093904A71100000————0
    10-24
    		5/16"-18
    		0.313"I
    		0.272"2—93340A405000093875A00100000993340A60700000
    10-32
    		5/16"-18
    		0.313"I
    		0.272"2—93340A305000093875A00100000993340A61800000
    1/4"-20
    		3/8"-16
    		0.375"Q
    		0.332"2—93340A410000093875A01000000893340A62900000
    1/4"-28
    		3/8"-16
    		0.375"Q
    		0.332"2—93340A310000093875A01000000893340A64000000
    5/16"-18
    		7/16"-14
    		0.438"X
    		0.397"4—93340A415000093875A01500000793340A65100000
    5/16"-24
    		7/16"-14
    		0.438"X
    		0.397"4—93340A315000093875A01500000793340A66200000
    3/8"-16
    		1/2"-13
    		0.500"29/64"
    		0.453"4—93340A420000093875A02000000693340A67300000
    3/8"-24
    		1/2"-13
    		0.500"29/64"
    		0.453"4—93340A320000093875A02000000693340A68400000
    7/16"-14
    		9/16"-12
    		0.563"33/64"
    		0.516"4—93340A4250000093875A02500000693340A695000000
    7/16"-20
    		9/16"-12
    		0.563"33/64"
    		0.516"4—93340A3250000093875A02500000693340A706000000
    1/2"-13
    		5/8"-11
    		0.625"37/64"
    		0.578"4—93340A3300000093875A03000000493340A71700000
    1/2"-20
    		5/8"-11
    		0.625"37/64"
    		0.578"4—93340A4300000093875A03000000493340A72800000
    M2 x 0.4 mmM4 x 0.7 mm3 mm3.4 mm
    		3.4 mm2—93715A3150000094010A41500000————0
    M2.5 x 0.45 mmM4.5 x 0.75 mm3.81 mm3.9 mm
    		3.9 mm2—93715A3250000094010A42500000————0
    M3 x 0.5 mmM5 x 0.8 mm4.25 mm4.4 mm
    		4.4 mm2—93715A3350000094010A43500000————0
    M4 x 0.7 mmM6 x 0.75 mm5.25 mm5.5 mm
    		5.5 mm2—93715A3450000094010A44500000————0
    M5 x 0.8 mmM8 x 1.25 mm8 mm6.9 mm
    		6.9 mm2—93715A605000094010A31000000893715A415000000
    M6 x 1 mmM10 x 1.25 mm10 mm8.8 mm
    		8.8 mm2—93715A610000094010A32500000893715A420000000
    M8 x 1 mmM12 x 1.25 mm12 mm10.8 mm
    		10.8 mm4—93715A6200000094010A31500000693715A425000000
    M8 x 1.25 mmM12 x 1.25 mm12 mm10.8 mm
    		10.8 mm4—93715A6150000094010A31500000693715A430000000
    M10 x 1.25 mmM14 x 1.5 mm14 mm12.8 mm
    		12.8 mm4—93715A6300000094010A33000000493715A43500000
    M10 x 1.5 mmM14 x 1.5 mm14 mm12.8 mm
    		12.8 mm4—93715A6250000094010A33000000493715A44000000
    M12 x 1.25 mmM16 x 1.5 mm16 mm14.75 mm
    		14.75 mm4—93715A6400000094010A32000000393715A44500000
    M12 x 1.75 mmM16 x 1.5 mm16 mm14.75 mm
    		14.75 mm4—93715A6350000094010A32000000393715A45000000
     
    High-Strength High-Temperature A286 Stainless Steel
    2-56
    		8-32
    		0.125"30 Ga.
    		0.134"2MS51830CA10193509A1100000093904A15000000————0
    4-40
    		10-32
    		0.172"20 Ga.
    		0.161"2MS51830CA10293509A1200000093904A25000000————0
    6-32
    		12-28
    		0.172"3/16"
    		0.187"2MS51830CA10393509A1300000093904A35000000————0
    8-32
    		1/4"-28
    		0.219"1 Ga.
    		0.228"2MS51830CA10493509A1400000093904A45000000————0
    10-24
    		5/16"-18
    		0.313"I
    		0.272"2MS51830CA10593509A1500000093904A60500000————0
    1/4"-20
    		3/8"-16
    		0.375"Q
    		0.332"2MS51830CA10693509A1600000093904A61500000————0
    1/4"-28
    		3/8"-16
    		0.375"Q
    		0.332"2MS51830CA20293509A17000000———0————0
    5/16"-24
    		7/16"-14
    		0.438"X
    		0.397"4MS51830CA20393509A18000000———0————0
    3/8"-16
    		1/2"-13
    		0.500"29/64"
    		0.453"4MS51830CA10893509A1900000093904A63500000————0
    3/8"-24
    		1/2"-13
    		0.500"29/64"
    		0.453"4MS51830CA20493509A21000000———0————0
    1/2"-13
    		5/8"-11
    		0.625"37/64"
    		0.578"4MS51830CA11093509A2200000093904A64500000————0
    1/2"-20
    		5/8"-11
    		0.625"37/64"
    		0.578"4MS51830CA20693509A23000000———0————0
    M2 x 0.4 mmM4 x 0.7 mm3 mm3.4 mm
    		3.4 mm2NA0147-02093509A3300000094010A41500000————0
    M3 x 0.5 mmM5 x 0.8 mm4.25 mm4.4 mm
    		4.4 mm2NA0147-03093509A3400000094010A43500000————0
    M4 x 0.7 mmM6 x 0.75 mm5.25 mm5.5 mm
    		5.5 mm2NA0147-04093509A3500000094010A44500000————0
    M5 x 0.8 mmM8 x 1.25 mm8 mm6.9 mm
    		6.9 mm2NA0149-05093509A3600000093904A77900000————0
    M8 x 1 mmM12 x 1.25 mm12 mm10.8 mm
    		10.8 mm4NA0149-08093509A3800000093904A78200000————0
    M8 x 1.25 mmM12 x 1.25 mm12 mm10.8 mm
    		10.8 mm4—93509A3700000093904A78200000————0
     
    Extra-Thick Wall
     
    Black Phosphate-Coated Steel
    6-32
    		5/16"-18
    		0.313"I
    		0.272"2—93302A4700000093302A67000000————0
    8-32
    		3/8"-16
    		0.313"Q
    		0.332"2—93302A4800000093302A68000000————0
    10-24
    		7/16"-14
    		0.313"X
    		0.397"2—93302A4900000093302A69000000————0
    10-32
    		7/16"-14
    		0.313"X
    		0.397"2—93302A5100000093302A69000000————0
    1/4"-20
    		1/2"-13
    		0.375"29/64"
    		0.453"2—93302A1000000093302A21000000893302A410000000
    1/4"-28
    		1/2"-13
    		0.375"29/64"
    		0.453"2—93302A5200000093302A21000000————0
    5/16"-18
    		9/16"-12
    		0.438"33/64"
    		0.516"4—93302A1200000093302A22000000793302A420000000
    5/16"-24
    		9/16"-12
    		0.438"33/64"
    		0.516"4—93302A5300000093302A22000000————0
    3/8"-16
    		5/8"-11
    		0.500"37/64"
    		0.578"4—93302A1400000093302A24000000693302A430000000
    3/8"-24
    		5/8"-11
    		0.500"37/64"
    		0.578"4—93302A5400000093302A24000000————0
    7/16"-14
    		3/4"-16
    		0.625"45/64"
    		0.703"4—93302A5500000093302A71000000————0
    7/16"-20
    		3/4"-16
    		0.625"45/64"
    		0.703"4—93302A5600000093302A71000000————0
    1/2"-13
    		7/8"-14
    		0.688"53/64"
    		0.828"4—93302A1600000093302A26000000493302A440000000
    1/2"-20
    		7/8"-14
    		0.688"53/64"
    		0.828"4—93302A5700000093302A26000000————0
    9/16"-12
    		7/8"-14
    		0.813"53/64"
    		0.828"4—93302A5800000093302A72000000————0
    5/8"-11
    		1"-12
    		0.875"15/16"
    		0.936"4—93302A1700000093302A27000000393302A450000000
    5/8"-18
    		1"-12
    		0.875"15/16"
    		0.936"4—93302A6100000093302A27000000————0
    3/4"-10
    		1 1/4"-12
    		1.125"1 3/16"
    		1.188"4—93302A1800000093302A28000000393302A460000000
    3/4"-16
    		1 1/4"-12
    		1.125"1 3/16"
    		1.188"4—93302A6200000093302A28000000————0
    7/8"-9
    		1 3/8"-12
    		1.250"1 5/16"
    		1.313"4—93302A6300000093302A73000000————0
    1"-8
    		1 1/2"-12
    		1.375"1 7/16"
    		1.438"4—93302A6500000093302A74000000————0
     
    18-8 Stainless Steel
    6-32
    		5/16"-18
    		0.313"I
    		0.272"2—93340A8110000093302A67000000————0
    8-32
    		3/8"-16
    		0.313"Q
    		0.332"2—93340A8120000093302A68000000————0
    10-24
    		7/16"-14
    		0.313"X
    		0.397"2—93340A8130000093302A69000000————0
    10-32
    		7/16"-14
    		0.313"X
    		0.397"2—93340A8140000093302A69000000————0
    1/4"-20
    		1/2"-13
    		0.375"29/64"
    		0.453"2—93340A8150000093302A21000000————0
    1/4"-28
    		1/2"-13
    		0.375"29/64"
    		0.453"2—93340A8160000093302A21000000————0
    5/16"-18
    		9/16"-12
    		0.438"33/64"
    		0.516"4—93340A8170000093302A22000000————0
    5/16"-24
    		9/16"-12
    		0.438"33/64"
    		0.516"4—93340A8180000093302A22000000————0
    3/8"-16
    		5/8"-11
    		0.500"37/64"
    		0.578"4—93340A8190000093302A24000000————0
    3/8"-24
    		5/8"-11
    		0.500"37/64"
    		0.578"4—93340A8210000093302A24000000————0
    7/16"-14
    		3/4"-16
    		0.625"45/64"
    		0.703"4—93340A8220000093302A71000000————0
    7/16"-20
    		3/4"-16
    		0.625"45/64"
    		0.703"4—93340A8230000093302A71000000————0
    1/2"-13
    		7/8"-14
    		0.688"53/64"
    		0.828"4—93340A8240000093302A26000000————0
    1/2"-20
    		7/8"-14
    		0.688"53/64"
    		0.828"4—93340A8250000093302A26000000————0
    5/8"-11
    		1"-12
    		0.875"15/16"
    		0.938"4—93340A8280000093302A27000000————0
    5/8"-18
    		1"-12
    		0.875"15/16"
    		0.938"4—93340A8290000093302A27000000————0
    3/4"-10
    		1 1/4"-12
    		1.125"1 3/16"
    		1.188"4—93340A83100000093302A28000000————0
    3/4"-16
    		1 1/4"-12
    		1.125"1 3/16"
    		1.188"4—93340A8320000093302A28000000————0
    7/8"-9
    		1 3/8"-12
    		1.250"1 5/16"
    		1.313"4—93340A83300000093302A73000000————0
    1"-8
    		1 1/2"-12
    		1.375"1 7/16"
    		1.438"4—93340A83500000093302A74000000————0
     

    Heat-Set Threaded Inserts for Plastic

    Create a secure base for fasteners in plastic, including brittle 3D printed parts. Press these inserts into straight holes that have been drilled, printed, or molded into plastic. Then, heat them with a soldering tip to melt the surrounding material. As the plastic cools, it fuses to the sharp, diagonal ridges around the inserts, which prevents them from being twisted or pulled out. The interior is fully threaded, so you can access the threads from both sides of a through hole. Also known as Chevron and headed inserts.
    Flanged Profile—Flanges on the insert create a load-bearing surface that prevents cracks or deformation in the base material. They also curb overtightening and keep inserts from getting pulled out or through.
    Brass—Conductive and nonmagnetic, these inserts are useful for electrical applications. They resist moisture but aren't as strong as steel inserts.
    Lightweight Aluminum—At one-third the weight of steel or brass, use these inserts in robotics, aerospace parts, and other applications with strict weight limits. They also resist rust about as well as stainless steel but aren't as strong. Since inserts are lead-free, they can be safely recycled.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals. Since they’re lead-free, they can be safely recycled.
    Inserts
    Soldering
    Installation Tips
    Extraction Tips
    Thread Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Pkg.
    Qty.
    Pkg.
    Each
    Each
    Standard Profile
    Image of Product. Bottom orientation. Threaded Inserts. Heat-Set Threaded Inserts for Plastic, Standard Profile.
     
    Brass
    2-56
    		0.100"30 Ga.
    		0.129"5094459A2300000092160A3110000092160A201000000
    2-56
    		0.125"3.2 mm
    		0.126"5094459A7280000092160A311000092160A20100000
    2-56
    		0.157"30 Ga.
    		0.129"5094459A240000092160A311000092160A20100000
    4-40
    		0.135"22 Ga.
    		0.157"5094459A250000092160A315000092160A20300000
    4-40
    		0.170"22 Ga.
    		0.157"5094459A2600000092160A315000092160A20300000
    4-40
    		0.226"22 Ga.
    		0.157"5094459A2700000092160A315000092160A20300000
    6-32
    		0.125"3/16"
    		0.188"2594459A729000092160A319000092160A20500000
    6-32
    		0.150"11 Ga.
    		0.191"5094459A2800000092160A319000092160A20500000
    6-32
    		0.226"3/16"
    		0.188"2594459A7310000092160A319000092160A20500000
    6-32
    		0.281"11 Ga.
    		0.191"5094459A2900000092160A319000092160A20500000
    8-32
    		0.185"2 Ga.
    		0.221"5094459A3100000092160A323000092160A20700000
    8-32
    		0.250"2 Ga.
    		0.221"5094459A3200000092160A323000092160A20700000
    8-32
    		0.321"2 Ga.
    		0.221"5094459A3300000092160A323000092160A20700000
    10-24
    		0.225"6.4 mm
    		0.252"2594459A732000092160A327000092160A20900000
    10-24
    		0.250"6.4 mm
    		0.252"2594459A733000092160A327000092160A20900000
    10-24
    		0.310"6.4 mm
    		0.252"2594459A734000092160A327000092160A20900000
    10-24
    		0.380"6.5 mm
    		0.256"1094459A438000092160A327000092160A20900000
    10-32
    		0.225"6.4 mm
    		0.252"2594459A735000092160A327000092160A21100000
    10-32
    		0.250"F
    		0.255"5094459A3400000092160A327000092160A21100000
    10-32
    		0.310"F
    		0.255"5094459A3500000092160A327000092160A21100000
    10-32
    		0.375"F
    		0.255"5094459A3600000092160A327000092160A21100000
    1/4"-20
    		0.226"8 mm
    		0.315"2594459A7360000092160A331000092160A21300000
    1/4"-20
    		0.250"8 mm
    		0.315"2594459A737000092160A331000092160A21300000
    1/4"-20
    		0.312"O
    		0.316"5094459A3700000092160A331000092160A21300000
    1/4"-20
    		0.375"O
    		0.316"2594459A380000092160A331000092160A21300000
    1/4"-20
    		0.500"O
    		0.316"2594459A3900000092160A331000092160A21300000
    1/4"-28
    		0.226"8 mm
    		0.315"5094459A7380000092160A331000092160A10700000
    1/4"-28
    		0.312"8 mm
    		0.315"2594459A7390000092160A331000092160A10700000
    1/4"-28
    		0.500"8 mm
    		0.315"5094459A7010000092160A331000092160A10700000
    5/16"-18
    		0.250"V
    		0.377"2594459A7410000092160A3080000092160A10500000
    5/16"-18
    		0.500"V
    		0.378"2594459A7020000092160A3080000092160A10500000
    5/16"-24
    		0.250"V
    		0.377"2594459A7420000092160A3080000092160A10600000
    5/16"-24
    		0.500"V
    		0.378"2594459A7030000092160A3080000092160A10600000
    3/8"-16
    		0.500"15/32"
    		0.469"2594459A7040000092160A3090000092160A10400000
    3/8"-24
    		0.500"15/32"
    		0.469"2594459A7050000092160A30900000———0
    1/2"-13
    		0.625"5/8"
    		0.627"594459A74300000———0———0
    M1 x 0.25 mm2.5 mm1.75 mm
    		1.75 mm10092120A11000000———0———0
    M1.2 x 0.25 mm1 mm1.75 mm
    		1.75 mm10092120A12000000———0———0
    M1.2 x 0.25 mm2.5 mm1.75 mm
    		1.75 mm10092120A13000000———0———0
    M1.4 x 0.3 mm3 mm44 Ga.
    		2.2 mm10092120A14000000———0———0
    M1.6 x 0.35 mm3 mm44 Ga.
    		2.2 mm10092120A15000000———0———0
    M2 x 0.4 mm2.5 mm30 Ga.
    		3.3 mm5094459A110000092160A34100000———0
    M2 x 0.4 mm3.2 mm3.2 mm
    		3.2 mm5094459A767000092160A34100000———0
    M2 x 0.4 mm4 mm30 Ga.
    		3.3 mm5094459A120000092160A34100000———0
    M2.5 x 0.45 mm4 mm22 Ga.
    		4 mm2594459A768000092160A315000092160A22500000
    M2.5 x 0.45 mm5.9 mm20 Ga.
    		4.1 mm2594459A439000092160A315000092160A22500000
    M3 x 0.5 mm3.4 mm22 Ga.
    		4 mm5094459A769000092160A315000092160A22700000
    M3 x 0.5 mm4.3 mm22 Ga.
    		4 mm5094459A13000000———092160A22700000
    M3 x 0.5 mm5.7 mm22 Ga.
    		4 mm5094459A1400000092160A315000092160A22700000
    M3 x 0.5 mm6.4 mm3/16"
    		4.8 mm2594459A771000092160A315000092160A22700000
    M3.5 x 0.6 mm3.8 mm3/16"
    		4.8 mm2594459A772000092160A319000092160A10100000
    M3.5 x 0.6 mm6.4 mm3/16"
    		4.8 mm2594459A773000092160A319000092160A10100000
    M3.5 x 0.6 mm7.3 mm11 Ga.
    		4.9 mm2594459A441000092160A319000092160A10100000
    M4 x 0.7 mm4.7 mm7/32"
    		5.6 mm5094459A1500000092160A323000092160A22900000
    M4 x 0.7 mm6.4 mm7/32"
    		5.6 mm5094459A1600000092160A323000092160A22900000
    M4 x 0.7 mm8.2 mm7/32"
    		5.6 mm5094459A1700000092160A323000092160A22900000
    M5 x 0.8 mm5.7 mm6.4 mm
    		6.4 mm2594459A774000092160A327000092160A23100000
    M5 x 0.8 mm7.9 mm6.4 mm
    		6.4 mm2594459A775000092160A327000092160A23100000
    M5 x 0.8 mm9.5 mm6.5 mm
    		6.5 mm5094459A1800000092160A327000092160A23100000
    M6 x 1 mm6.4 mm8 mm
    		8 mm2594459A7760000092160A327000092160A23300000
    M6 x 1 mm7.9 mm8 mm
    		8 mm5094459A1900000092160A327000092160A23300000
    M6 x 1 mm9.5 mm8 mm
    		8 mm2594459A210000092160A327000092160A23300000
    M6 x 1 mm12.7 mm8 mm
    		8 mm2594459A2200000092160A327000092160A23300000
    M8 x 1.25 mm6.4 mmV
    		9.6 mm2594459A7770000092160A3080000092160A10200000
    M8 x 1.25 mm12.7 mmV
    		9.6 mm2594459A7780000092160A3080000092160A10200000
    M10 x 1.5 mm12.7 mm15/32"
    		11.9 mm1094459A7790000092160A3090000092160A10300000
     
    Lightweight Aluminum
    2-56
    		0.125"30 Ga.
    		0.130"2594459A806000092160A311000092160A20100000
    2-56
    		0.162"30 Ga.
    		0.130"2594459A411000092160A311000092160A20100000
    4-40
    		0.135"20 Ga.
    		0.161"2594459A807000092160A315000092160A20300000
    4-40
    		0.231"20 Ga.
    		0.161"2594459A412000092160A315000092160A20300000
    6-32
    		0.150"11 Ga.
    		0.192"2594459A808000092160A319000092160A20500000
    6-32
    		0.286"11 Ga.
    		0.192"2594459A413000092160A319000092160A20500000
    8-32
    		0.185"2 Ga.
    		0.226"2594459A809000092160A323000092160A20700000
    8-32
    		0.326"2 Ga.
    		0.226"2594459A414000092160A323000092160A20700000
    10-24
    		0.380"6.5 mm
    		0.256"2594459A415000092160A327000092160A20900000
    10-32
    		0.225"6.5 mm
    		0.256"1094459A811000092160A327000092160A21100000
    10-32
    		0.380"6.5 mm
    		0.256"2594459A416000092160A327000092160A21100000
    1/4"-20
    		0.300"O
    		0.319"1094459A812000092160A331000092160A21300000
    1/4"-20
    		0.505"O
    		0.319"1094459A417000092160A331000092160A21300000
    1/4"-28
    		0.500"O
    		0.319"1094459A813000092160A331000092160A10700000
    3/8"-16
    		0.500"15/32"
    		0.470"1094459A814000092160A3090000092160A10400000
    M2 x 0.4 mm3.4 mm30 Ga.
    		3.3 mm2594459A819000092160A34100000———0
    M2 x 0.4 mm4.1 mm30 Ga.
    		3.3 mm2594459A418000092160A34100000———0
    M2.5 x 0.45 mm5.9 mm20 Ga.
    		4.1 mm2594459A419000092160A315000092160A22500000
    M3 x 0.5 mm3.4 mm20 Ga.
    		4.1 mm2594459A821000092160A315000092160A22700000
    M3 x 0.5 mm5.9 mm20 Ga.
    		4.1 mm2594459A421000092160A315000092160A22700000
    M4 x 0.7 mm4.7 mm2 Ga.
    		5.7 mm2594459A815000092160A323000092160A22900000
    M4 x 0.7 mm8.3 mm2 Ga.
    		5.7 mm2594459A422000092160A323000092160A22900000
    M5 x 0.8 mm5.7 mm6.5 mm
    		6.5 mm1094459A816000092160A327000092160A23100000
    M5 x 0.8 mm9.6 mm6.5 mm
    		6.5 mm2594459A423000092160A327000092160A23100000
    M6 x 1 mm7.6 mmO
    		8.1 mm1094459A817000092160A327000092160A23300000
    M6 x 1 mm12.8 mmO
    		8.1 mm1094459A424000092160A327000092160A23300000
     
    18-8 Stainless Steel
    2-56
    		0.100"3.2 mm
    		0.126"594459A744000092160A311000092160A20100000
    2-56
    		0.125"3.2 mm
    		0.126"594459A745000092160A311000092160A20100000
    2-56
    		0.162"30 Ga.
    		0.130"1094459A425000092160A311000092160A20100000
    4-40
    		0.135"22 Ga.
    		0.157"594459A747000092160A315000092160A20300000
    4-40
    		0.170"22 Ga.
    		0.157"594459A748000092160A315000092160A20300000
    4-40
    		0.231"20 Ga.
    		0.161"1094459A426000092160A315000092160A20300000
    6-32
    		0.125"3/16"
    		0.188"594459A749000092160A319000092160A20500000
    6-32
    		0.150"3/16"
    		0.188"594459A751000092160A319000092160A20500000
    6-32
    		0.226"3/16"
    		0.188"594459A752000092160A319000092160A20500000
    6-32
    		0.250"3/16"
    		0.188"594459A753000092160A319000092160A20500000
    6-32
    		0.286"11 Ga.
    		0.192"1094459A427000092160A319000092160A20500000
    8-32
    		0.185"2 Ga.
    		0.221"594459A755000092160A323000092160A20700000
    8-32
    		0.250"2 Ga.
    		0.221"594459A756000092160A323000092160A20700000
    8-32
    		0.326"2 Ga.
    		0.226"1094459A428000092160A323000092160A20700000
    10-32
    		0.225"6.4 mm
    		0.252"594459A757000092160A327000092160A21100000
    10-32
    		0.310"6.4 mm
    		0.252"594459A758000092160A327000092160A21100000
    10-32
    		0.380"6.5 mm
    		0.256"594459A429000092160A327000092160A21100000
    1/4"-20
    		0.226"8 mm
    		0.315"594459A759000092160A331000092160A21300000
    1/4"-20
    		0.250"8 mm
    		0.315"594459A761000092160A331000092160A21300000
    1/4"-20
    		0.312"8 mm
    		0.315"594459A762000092160A331000092160A21300000
    1/4"-20
    		0.375"8 mm
    		0.315"594459A763000092160A331000092160A21300000
    1/4"-20
    		0.505"O
    		0.319"594459A431000092160A331000092160A21300000
    1/4"-28
    		0.250"8 mm
    		0.315"594459A764000092160A331000092160A10700000
    1/4"-28
    		0.375"8 mm
    		0.315"594459A765000092160A331000092160A10700000
    1/4"-28
    		0.500"8 mm
    		0.315"594459A766000092160A331000092160A10700000
    M2 x 0.4 mm2.5 mm3.2 mm
    		3.2 mm594459A781000092160A34100000———0
    M2 x 0.4 mm3.2 mm3.2 mm
    		3.2 mm594459A782000092160A34100000———0
    M2 x 0.4 mm4.1 mm30 Ga.
    		3.3 mm1094459A432000092160A34100000———0
    M2.5 x 0.45 mm3.4 mm22 Ga.
    		4 mm594459A783000092160A315000092160A22500000
    M2.5 x 0.45 mm4.3 mm22 Ga.
    		4 mm594459A784000092160A315000092160A22500000
    M2.5 x 0.45 mm5.9 mm20 Ga.
    		4.1 mm1094459A433000092160A315000092160A22500000
    M3 x 0.5 mm3.4 mm22 Ga.
    		4 mm594459A785000092160A315000092160A22700000
    M3 x 0.5 mm4.3 mm22 Ga.
    		4 mm594459A786000092160A315000092160A22700000
    M3 x 0.5 mm5.9 mm20 Ga.
    		4.1 mm1094459A434000092160A315000092160A22700000
    M3.5 x 0.6 mm3.8 mm3/16"
    		4.8 mm594459A787000092160A319000092160A10100000
    M3.5 x 0.6 mm7.1 mm3/16"
    		4.8 mm594459A788000092160A319000092160A10100000
    M4 x 0.7 mm6.4 mm2 Ga.
    		5.6 mm594459A789000092160A323000092160A22900000
    M4 x 0.7 mm8.3 mm2 Ga.
    		5.7 mm594459A435000092160A323000092160A22900000
    M5 x 0.8 mm4.7 mm6.4 mm
    		6.4 mm594459A791000092160A327000092160A23100000
    M5 x 0.8 mm5.7 mm6.4 mm
    		6.4 mm594459A792000092160A327000092160A23100000
    M5 x 0.8 mm7.9 mm6.4 mm
    		6.4 mm594459A793000092160A327000092160A23100000
    M5 x 0.8 mm9.6 mm6.5 mm
    		6.5 mm1094459A436000092160A327000092160A23100000
    M6 x 1 mm7.6 mmO
    		8.1 mm1094459A8180000092160A327000092160A23300000
    M6 x 1 mm12.8 mmO
    		8.1 mm594459A437000092160A327000092160A23300000
    M10 x 1.5 mm12.7 mm15/32"
    		11.9 mm594459A7940000092160A3090000092160A10300000
     
    Flanged Profile
    Image of Product. Flanged Profile. Bottom orientation. Threaded Inserts. Heat-Set Threaded Inserts for Plastic, Flanged Profile.

    Flanged

    Profile

     
    Brass
    2-56
    		0.157"3.2 mm
    		0.126"5097171A110000092160A311000092160A20100000
    4-40
    		0.226"22 Ga.
    		0.157"5097171A120000092160A315000092160A20300000
    6-32
    		0.180"12 Ga.
    		0.189"5097171A130000092160A319000092160A20500000
    6-32
    		0.281"12 Ga.
    		0.189"5097171A140000092160A319000092160A20500000
    8-32
    		0.185"2 Ga.
    		0.221"5097171A150000092160A323000092160A20700000
    8-32
    		0.250"2 Ga.
    		0.221"5097171A1600000092160A323000092160A20700000
    8-32
    		0.321"2 Ga.
    		0.221"5097171A1700000092160A323000092160A20700000
    10-24
    		0.250"6.4 mm
    		0.252"5097171A1800000092160A327000092160A20900000
    10-24
    		0.375"6.4 mm
    		0.252"5097171A1900000092160A327000092160A20900000
    10-32
    		0.225"6.4 mm
    		0.252"5097171A2000000092160A327000092160A21100000
    10-32
    		0.250"6.4 mm
    		0.252"5097171A2100000092160A327000092160A21100000
    10-32
    		0.375"6.4 mm
    		0.252"5097171A2200000092160A327000092160A21100000
    1/4"-20
    		0.300"O
    		0.316"2597171A230000092160A331000092160A21300000
    1/4"-20
    		0.500"O
    		0.316"2597171A240000092160A331000092160A21300000
    1/4"-28
    		0.500"O
    		0.316"2597171A250000092160A331000092160A10700000
    5/16"-18
    		0.500"V
    		0.377"1097171A260000092160A3080000092160A10500000
    5/16"-24
    		0.500"V
    		0.377"1097171A270000092160A3080000092160A10600000
    3/8"-16
    		0.500"15/32"
    		0.469"1097171A280000092160A3090000092160A10400000
    3/8"-24
    		0.500"15/32"
    		0.469"1097171A290000092160A30900000———0
    M2 x 0.4 mm4 mm3.2 mm
    		3.2 mm5097171A3000000092160A34100000———0
    M2.5 x 0.45 mm5.7 mm22 Ga.
    		4 mm5094459A795000092160A315000092160A22500000
    M3 x 0.5 mm5.7 mm22 Ga.
    		4 mm5097171A31000000———092160A22700000
    M3.5 x 0.6 mm7.1 mm12 Ga.
    		4.8 mm5097171A3200000092160A319000092160A10100000
    M4 x 0.7 mm4.7 mm7/32"
    		5.6 mm5097171A3300000092160A323000092160A22900000
    M4 x 0.7 mm6.4 mm2 Ga.
    		5.6 mm2594459A7960000092160A323000092160A22900000
    M4 x 0.7 mm8.2 mm7/32"
    		5.6 mm5097171A3400000092160A323000092160A22900000
    M5 x 0.8 mm5.7 mm6.4 mm
    		6.4 mm2594459A797000092160A327000092160A23100000
    M5 x 0.8 mm9.5 mm6.4 mm
    		6.4 mm5097171A3500000092160A327000092160A23100000
    M6 x 1 mm7.6 mm8 mm
    		8 mm5097171A3600000092160A327000092160A23300000
    M6 x 1 mm12.7 mm8 mm
    		8 mm2597171A3700000092160A327000092160A23300000
    M8 x 1.25 mm12.7 mmV
    		9.6 mm1097171A380000092160A3080000092160A10200000
    M10 x 1.5 mm12.7 mm15/32"
    		11.9 mm1094459A7980000092160A3090000092160A10300000
     
    18-8 Stainless Steel
    2-56
    		0.157"3.2 mm
    		0.126"2594459A711000092160A311000092160A20100000
    4-40
    		0.226"22 Ga.
    		0.157"2594459A7120000092160A315000092160A20300000
    6-32
    		0.281"12 Ga.
    		0.189"2594459A7130000092160A319000092160A20500000
    8-32
    		0.321"7/32"
    		0.22"2594459A7140000092160A323000092160A20700000
    10-24
    		0.375"6.4 mm
    		0.252"2594459A7150000092160A327000092160A20900000
    10-32
    		0.375"6.4 mm
    		0.252"2594459A7160000092160A327000092160A21100000
    1/4"-20
    		0.500"8 mm
    		0.315"1094459A7170000092160A331000092160A21300000
    1/4"-28
    		0.500"8 mm
    		0.315"1094459A7180000092160A331000092160A10700000
    5/16"-18
    		0.500"V
    		0.378"1094459A7190000092160A3080000092160A10500000
    3/8"-16
    		0.500"15/32"
    		0.469"1094459A7210000092160A3090000092160A10400000
    M2 x 0.4 mm4 mm3.2 mm
    		3.2 mm2594459A722000092160A34100000———0
    M2.5 x 0.45 mm5.7 mm22 Ga.
    		4 mm2594459A7230000092160A315000092160A22500000
    M3 x 0.5 mm5.7 mm22 Ga.
    		4 mm2594459A7240000092160A315000092160A22700000
    M3.5 x 0.6 mm4.6 mm3/16"
    		4.8 mm594459A799000092160A319000092160A10100000
    M4 x 0.7 mm6.4 mm2 Ga.
    		5.6 mm594459A801000092160A323000092160A22900000
    M4 x 0.7 mm8.1 mm7/32"
    		5.6 mm2594459A7250000092160A323000092160A22900000
    M5 x 0.8 mm9.5 mm6.4 mm
    		6.4 mm2594459A7260000092160A327000092160A23100000
    M6 x 1 mm12.7 mm8 mm
    		8 mm1094459A7270000092160A327000092160A23300000
    M10 x 1.5 mm12.7 mm15/32"
    		11.9 mm594459A8050000092160A3090000092160A10300000
     
    Soldering Irons
    Each
    Economy Soldering Iron, 60W7662A696000000

    Thread-Locking Threaded Inserts

    Image of Product. Bottom orientation. Threaded Inserts. Thread-Locking Threaded Inserts.
    With Loctite® adhesive already on the threads, these inserts won’t back out or vibrate loose. The adhesive reaches full strength after 72 hours. Unlike helical inserts, you can install them with a standard drill and tap. However, thread-locking inserts are difficult to remove and reuse.
    After drilling and tapping your hole, install inserts with a wrench or an installation bit. To use a wrench, thread an insert and two hex nuts onto a bolt. Then, grip and turn the top nut to drive into the hole. For slotted inserts, you can drive with a slotted screwdriver instead.
    Standard Wall—Stronger than thin-wall inserts, these are your go-to choice for threading most holes.
    Thin Wall—Use these inserts near the edge of workpieces or wherever you only have space for a small hole. They're also lighter than standard and extra-thick wall inserts for applications with strict weight limits.
    Extra-Thick Wall—Stronger than standard- and thin-wall inserts, use them to reduce the size of tapped holes or replace threads that have been drilled out.
    Black Phosphate-Coated Steel—These inserts resist occasional moisture.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these inserts won't degrade when exposed to harsh weather, salt water, and most chemicals.
    Inserts
    Installation
    Tools
    Inserts with
    Installation Tools
    Thread Size
    For Tap Thread
    Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Drive
    Style
    Pkg.
    Qty.
    Pkg.
    Each
    No. of Inserts
    Included
    Each
    Standard Wall
     
    Black Phosphate-Coated Steel
    4-40
    		10-32
    		0.250"5/32"
    		0.156"Slotted
    		1090248A0160000094110A220000000————0
    6-32
    		1/4"-20
    		0.281"7 Ga.
    		0.201"Slotted
    		1090248A0170000094110A11000000————0
    6-32
    		M6 x 1 mm6.5 mm5.1 mm
    		5.1 mmSlotted
    		597224A110000094110A11000000————0
    8-32
    		5/16"-18
    		0.297"F
    		0.257"Slotted
    		1090248A0180000094110A120000001095109A115000000
    8-32
    		M8 x 1.25 mm7.5 mm6.9 mm
    		6.9 mmSlotted
    		597224A130000094110A12000000————0
    10-24
    		3/8"-16
    		0.406"5/16"
    		0.313"Slotted
    		1090248A0210000094110A13000000————0
    10-24
    		M8 x 1.25 mm7.5 mm6.9 mm
    		6.9 mmSlotted
    		597224A1500000094110A13000000————0
    10-32
    		3/8"-16
    		0.406"5/16"
    		0.313"Slotted
    		1090248A0680000094110A130000001095109A11000000
    10-32
    		M8 x 1.25 mm7.5 mm6.9 mm
    		6.9 mmSlotted
    		597224A1700000094110A13000000————0
    1/4"-20
    		7/16"-14
    		0.438"23/64"
    		0.359"Slotted
    		1090248A0240000094110A140000001095109A11100000
    1/4"-20
    		7/16"-14
    		1"23/64"
    		0.359"Slotted
    		590248A0250000094110A14000000————0
    1/4"-20
    		M10 x 1.5 mm10.5 mm8.6 mm
    		8.6 mmSlotted
    		597224A1900000094110A14000000————0
    1/4"-28
    		7/16"-14
    		0.438"23/64"
    		0.359"Slotted
    		1090248A0740000094110A14000000————0
    5/16"-18
    		1/2"-13
    		0.484"27/64"
    		0.422"Slotted
    		1090248A0270000094110A150000001095109A11200000
    5/16"-18
    		1/2"-13
    		1"27/64"
    		0.422"Slotted
    		590248A0280000094110A15000000————0
    5/16"-18
    		M12 x 1.75 mm12.5 mm10.4 mm
    		10.4 mmSlotted
    		597224A2100000094110A15000000————0
    5/16"-24
    		1/2"-13
    		0.484"27/64"
    		0.422"Slotted
    		1090248A0780000094110A15000000————0
    3/8"-16
    		9/16"-12
    		0.516"31/64"
    		0.484"Slotted
    		1090248A0310000094110A160000001095109A11300000
    3/8"-16
    		9/16"-12
    		1"31/64"
    		0.484"Slotted
    		590248A0320000094110A16000000————0
    3/8"-16
    		M16 x 2 mm17 mm14 mm
    		14 mmSlotted
    		597224A2300000094110A16000000————0
    3/8"-24
    		9/16"-12
    		0.516"31/64"
    		0.484"Slotted
    		1090248A0820000094110A16000000————0
    7/16"-14
    		5/8"-11
    		0.656"17/32"
    		0.531"Slotted
    		590248A0340000094110A17000000————0
    7/16"-20
    		5/8"-11
    		0.656"17/32"
    		0.531"Slotted
    		590248A0840000094110A17000000————0
    1/2"-13
    		3/4"-10
    		0.656"21/32"
    		0.656"Slotted
    		590248A0380000094110A180000001095109A114000000
    1/2"-13
    		3/4"-10
    		1"21/32"
    		0.656"Slotted
    		590248A0390000094110A18000000————0
    1/2"-13
    		M16 x 2 mm17 mm14 mm
    		14 mmSlotted
    		597224A2500000094110A18000000————0
    1/2"-20
    		3/4"-10
    		0.656"21/32"
    		0.656"Slotted
    		590248A0860000094110A18000000————0
    9/16"-12
    		3/4"-10
    		0.656"21/32"
    		0.656"Slotted
    		590248A0410000094110A18000000————0
    9/16"-18
    		3/4"-10
    		0.656"21/32"
    		0.656"Slotted
    		590248A0900000094110A18000000————0
    5/8"-11
    		7/8"-9
    		0.688"49/64"
    		0.766"Slotted
    		590248A0440000094110A19000000————0
    5/8"-11
    		7/8"-9
    		1.125"49/64"
    		0.766"Slotted
    		590248A0450000094110A19000000————0
    5/8"-18
    		7/8"-9
    		0.688"49/64"
    		0.766"Slotted
    		590248A0870000094110A19000000————0
    3/4"-10
    		1"-8
    		0.781"7/8"
    		0.875"Slotted
    		590248A0510000094110A21000000————0
    3/4"-16
    		1"-8
    		0.781"7/8"
    		0.875"Slotted
    		590248A0880000094110A21000000————0
    7/8"-9
    		1 1/4"-7
    		1.125"1 7/64"
    		1.109"Slotted
    		190248A0520000094110A23000000————0
    7/8"-14
    		1 1/4"-7
    		1.125"1 7/64"
    		1.109"Slotted
    		190248A0930000094110A23000000————0
    1"-8
    		1 3/8"-12
    		1.250"1 9/32"
    		1.281"Slotted
    		190248A0540000094110A24000000————0
    1"-14
    		1 3/8"-12
    		1.250"1 9/32"
    		1.281"Slotted
    		190248A0890000094110A24000000————0
    M3 x 0.5 mmM6 x 1 mm6.5 mm5.1 mm
    		5.1 mmSlotted
    		1097084A1900000094110A22000000————0
    M4 x 0.7 mmM8 x 1.25 mm7.5 mm6.9 mm
    		6.9 mmSlotted
    		1097084A2000000094110A120000001090025A11000000
    M5 x 0.8 mmM8 x 1.25 mm7.5 mm6.9 mm
    		6.9 mmSlotted
    		1097084A2200000094110A120000001090025A11100000
    M6 x 1 mm3/8"-16
    		0.406"5/16"
    		0.313"Slotted
    		1097084A1100000094110A14000000————0
    M6 x 1 mmM10 x 1.5 mm10.5 mm8.6 mm
    		8.6 mmSlotted
    		597084A2300000094110A140000001090025A11200000
    M8 x 1.25 mm1/2"-13
    		0.484"27/64"
    		0.422"Slotted
    		1097084A1200000094110A15000000————0
    M8 x 1.25 mmM12 x 1.75 mm12.5 mm10.4 mm
    		10.4 mmSlotted
    		597084A2400000094110A150000001090025A11300000
    M10 x 1 mm9/16"-18
    		0.453"33/64"
    		0.516"—197084A3110000———0————0
    M10 x 1.25 mm9/16"-12
    		0.516"31/64"
    		0.484"Slotted
    		1097084A1250000094110A16000000————0
    M10 x 1.5 mm9/16"-12
    		0.516"31/64"
    		0.484"Slotted
    		1097084A1300000094110A16000000————0
    M10 x 1.5 mmM16 x 2 mm17 mm14 mm
    		14 mmSlotted
    		597084A2500000094110A16000000————0
    M12 x 1.25 mm5/8"-18
    		0.453"37/64"
    		0.578"—197084A3120000———0————0
    M12 x 1.25 mm5/8"-18
    		0.703"37/64"
    		0.578"—197084A3130000———0————0
    M12 x 1.75 mm3/4"-10
    		0.656"21/32"
    		0.656"Slotted
    		597084A1400000094110A17000000————0
    M12 x 1.75 mmM16 x 2 mm17 mm14 mm
    		14 mmSlotted
    		597084A2600000094110A17000000————0
    M14 x 1.25 mm3/4"-16
    		0.328"11/16"
    		0.688"—590248A09200000———0————0
    M14 x 1.25 mm3/4"-16
    		0.453"11/16"
    		0.688"—590248A09500000———0————0
    M14 x 1.25 mm3/4"-16
    		0.703"11/16"
    		0.688"—197084A3150000———0————0
    M14 x 1.25 mmM18 x 1.5 mm11.5 mm16.5 mm
    		16.5 mm—197084A3140000———0————0
    M14 x 2 mm7/8"-9
    		0.688"49/64"
    		0.766"Slotted
    		597084A1500000094110A18000000————0
    M16 x 2 mm1"-8
    		0.781"7/8"
    		0.875"Slotted
    		597084A1600000094110A19000000————0
    M16 x 2 mmM24 x 3 mm20 mm21 mm
    		21 mmSlotted
    		197084A270000094110A19000000————0
    M18 x 1.5 mm1"-12
    		0.453"59/64"
    		0.922"—197084A3160000———0————0
    M20 x 2.5 mmM36 x 4 mm30 mm33 mm
    		33 mmSlotted
    		197084A3100000094110A25000000————0
    M24 x 3 mmM36 x 4 mm30 mm33 mm
    		33 mmSlotted
    		197084A3170000094110A25000000————0
     
    18-8 Stainless Steel
    4-40
    		10-32
    		0.250"5/32"
    		0.156"Slotted
    		590247A0070000094110A22000000————0
    6-32
    		1/4"-20
    		0.281"7 Ga.
    		0.201"Slotted
    		590247A0080000094110A11000000————0
    8-32
    		5/16"-18
    		0.297"F
    		0.257"Slotted
    		590247A0090000094110A12000000————0
    10-24
    		3/8"-16
    		0.406"5/16"
    		0.313"Slotted
    		590247A0110000094110A13000000————0
    10-32
    		3/8"-16
    		0.406"5/16"
    		0.313"Slotted
    		590247A0210000094110A13000000————0
    1/4"-20
    		7/16"-14
    		0.438"U
    		0.368"Slotted
    		590247A0120000094110A14000000————0
    1/4"-28
    		7/16"-14
    		0.438"U
    		0.368"Slotted
    		590247A0220000094110A14000000————0
    5/16"-18
    		1/2"-13
    		0.484"27/64"
    		0.422"Slotted
    		590247A0130000094110A15000000————0
    5/16"-24
    		1/2"-13
    		0.484"27/64"
    		0.422"Slotted
    		590247A0230000094110A15000000————0
    3/8"-16
    		9/16"-12
    		0.516"31/64"
    		0.484"Slotted
    		590247A0140000094110A16000000————0
    3/8"-24
    		9/16"-12
    		0.516"31/64"
    		0.484"Slotted
    		590247A0240000094110A16000000————0
    7/16"-14
    		5/8"-11
    		0.656"17/32"
    		0.531"Slotted
    		190247A015000094110A17000000————0
    7/16"-20
    		5/8"-11
    		0.656"17/32"
    		0.531"Slotted
    		190247A025000094110A17000000————0
    1/2"-13
    		3/4"-10
    		0.656"21/32"
    		0.656"Slotted
    		190247A016000094110A18000000————0
    1/2"-20
    		3/4"-10
    		0.656"21/32"
    		0.656"Slotted
    		190247A026000094110A18000000————0
    5/8"-11
    		7/8"-9
    		0.688"49/64"
    		0.766"Slotted
    		190247A017000094110A19000000————0
    3/4"-10
    		1"-8
    		0.781"7/8"
    		0.875"Slotted
    		190247A0180000094110A21000000————0
    M3 x 0.5 mmM6 x 1 mm6.5 mm5.1 mm
    		5.1 mmSlotted
    		597120A1900000094110A22000000————0
    M4 x 0.7 mmM8 x 1.25 mm7.5 mm6.9 mm
    		6.9 mmSlotted
    		597120A2000000094110A12000000————0
    M5 x 0.8 mmM8 x 1.25 mm7.5 mm6.9 mm
    		6.9 mmSlotted
    		597120A2200000094110A12000000————0
    M6 x 1 mm3/8"-16
    		0.406"5/16"
    		0.313"Slotted
    		597120A1100000094110A14000000————0
    M6 x 1 mmM10 x 1.5 mm10.5 mm8.6 mm
    		8.6 mmSlotted
    		597120A2300000094110A14000000————0
    M8 x 1.25 mm1/2"-13
    		0.484"27/64"
    		0.422"Slotted
    		197120A120000094110A15000000————0
    M8 x 1.25 mmM12 x 1.75 mm12.5 mm10.4 mm
    		10.4 mmSlotted
    		197120A240000094110A15000000————0
    M10 x 1.25 mm9/16"-12
    		0.516"31/64"
    		0.484"Slotted
    		197120A125000094110A16000000————0
    M10 x 1.5 mm9/16"-12
    		0.516"31/64"
    		0.484"Slotted
    		197120A130000094110A16000000————0
    M10 x 1.5 mmM16 x 2 mm17 mm14 mm
    		14 mmSlotted
    		197120A250000094110A16000000————0
    M12 x 1.75 mm3/4"-10
    		0.656"21/32"
    		0.656"Slotted
    		197120A140000094110A17000000————0
    M12 x 1.75 mmM16 x 2 mm17 mm14 mm
    		14 mmSlotted
    		197120A260000094110A17000000————0
    M14 x 2 mm7/8"-9
    		0.688"49/64"
    		0.766"Slotted
    		197120A150000094110A18000000————0
    M16 x 2 mm1"-8
    		0.781"7/8"
    		0.875"Slotted
    		197120A160000094110A19000000————0
    M16 x 2 mmM24 x 3 mm20 mm21 mm
    		21 mmSlotted
    		197120A270000094110A19000000————0
     
    Highly Corrosion-Resistant 316 Stainless Steel
    4-40
    		10-32
    		0.250"5/32"
    		0.156"Slotted
    		190266A339000094110A22000000————0
    6-32
    		1/4"-20
    		0.281"7 Ga.
    		0.201"Slotted
    		190266A341000094110A11000000————0
    8-32
    		5/16"-18
    		0.297"F
    		0.257"Slotted
    		190266A338000094110A12000000————0
    10-24
    		3/8"-16
    		0.406"5/16"
    		0.313"Slotted
    		190266A340000094110A13000000————0
    10-32
    		3/8"-16
    		0.406"5/16"
    		0.313"Slotted
    		190266A342000094110A13000000————0
    1/4"-20
    		7/16"-14
    		0.438"U
    		0.368"Slotted
    		190266A346000094110A14000000————0
    5/16"-18
    		1/2"-13
    		0.484"27/64"
    		0.422"Slotted
    		190266A350000094110A15000000————0
    3/8"-16
    		9/16"-12
    		0.516"31/64"
    		0.484"Slotted
    		190266A354000094110A16000000————0
    1/2"-13
    		3/4"-10
    		0.656"21/32"
    		0.656"Slotted
    		190266A3560000094110A18000000————0
    3/4"-10
    		1"-8
    		0.781"7/8"
    		0.875"Slotted
    		190266A3430000094110A21000000————0
    M3 x 0.5 mmM6 x 1 mm6.5 mm5.1 mm
    		5.1 mmSlotted
    		196026A101000094110A22000000————0
    M4 x 0.7 mmM8 x 1.25 mm7.5 mm6.9 mm
    		6.9 mmSlotted
    		196026A102000094110A12000000————0
    M5 x 0.8 mmM8 x 1.25 mm7.5 mm6.9 mm
    		6.9 mmSlotted
    		196026A103000094110A12000000————0
    M6 x 1 mmM10 x 1.5 mm10.5 mm8.6 mm
    		8.6 mmSlotted
    		196026A104000094110A14000000————0
    M8 x 1.25 mmM12 x 1.75 mm12.5 mm10.4 mm
    		10.4 mmSlotted
    		196026A1050000094110A15000000————0
    M10 x 1.5 mmM16 x 2 mm17 mm14 mm
    		14 mmSlotted
    		196026A106000094110A16000000————0
    M12 x 1.75 mmM16 x 2 mm17 mm14 mm
    		14 mmSlotted
    		196026A1070000094110A17000000————0
     
    Thin Wall
     
    Black Phosphate-Coated Steel
    10-24
    		5/16"-18
    		0.313"I
    		0.272"Slotted
    		1090259A1240000094110A13000000————0
    10-32
    		5/16"-18
    		0.313"I
    		0.272"Slotted
    		1090259A1290000094110A130000001096015A11000000
    1/4"-20
    		3/8"-16
    		0.375"Q
    		0.332"Slotted
    		1090259A1320000094110A140000001096015A11100000
    1/4"-28
    		3/8"-16
    		0.375"Q
    		0.332"Slotted
    		1090259A1360000094110A14000000————0
    5/16"-18
    		7/16"-14
    		0.438"X
    		0.397"Slotted
    		1090259A1390000094110A150000001096015A11200000
    5/16"-24
    		7/16"-14
    		0.438"X
    		0.397"Slotted
    		1090259A1410000094110A15000000————0
    3/8"-16
    		1/2"-13
    		0.500"29/64"
    		0.453"Slotted
    		1090259A1440000094110A160000001096015A11300000
    3/8"-24
    		1/2"-13
    		0.500"29/64"
    		0.453"Slotted
    		1090259A1470000094110A16000000————0
    7/16"-14
    		9/16"-12
    		0.563"33/64"
    		0.516"Slotted
    		590259A1540000094110A17000000————0
    7/16"-20
    		9/16"-12
    		0.563"33/64"
    		0.516"Slotted
    		590259A1580000094110A17000000————0
    1/2"-13
    		5/8"-11
    		0.625"37/64"
    		0.578"Slotted
    		590259A1630000094110A180000001096015A114000000
    1/2"-20
    		5/8"-11
    		0.625"37/64"
    		0.578"Slotted
    		590259A1690000094110A18000000————0
    M4 x 0.7 mm5/16"-18
    		0.313"I
    		0.272"Slotted
    		590259A215000094110A12000000————0
    M5 x 0.8 mm5/16"-18
    		0.313"I
    		0.272"Slotted
    		590259A218000094110A13000000————0
    M6 x 1 mm3/8"-16
    		0.375"Q
    		0.332"Slotted
    		590259A2220000094110A140000001090025A11500000
    M8 x 1.25 mm7/16"-14
    		0.438"X
    		0.397"Slotted
    		590259A2300000094110A15000000————0
    M10 x 1.5 mm1/2"-13
    		0.500"29/64"
    		0.453"Slotted
    		190259A236000094110A16000000————0
    M12 x 1.75 mm5/8"-11
    		0.625"37/64"
    		0.578"Slotted
    		190259A241000094110A17000000————0
     
    18-8 Stainless Steel
    6-32
    		12-28
    		0.280"14 Ga.
    		0.182"Slotted
    		594165A2190000094110A22000000————0
    8-32
    		1/4"-28
    		0.290"3 Ga.
    		0.213"Slotted
    		594165A2230000094110A11000000————0
    10-24
    		5/16"-24
    		0.313"I
    		0.272"Slotted
    		594165A2270000094110A12000000————0
    10-32
    		5/16"-24
    		0.313"I
    		0.272"Slotted
    		594165A2310000094110A12000000————0
    1/4"-20
    		3/8"-24
    		0.375"Q
    		0.332"Slotted
    		594165A2350000094110A13000000————0
    1/4"-28
    		3/8"-24
    		0.375"Q
    		0.332"Slotted
    		594165A2390000094110A13000000————0
    5/16"-18
    		7/16"-20
    		0.438"25/64"
    		0.391"Slotted
    		594165A2430000094110A14000000————0
    5/16"-24
    		7/16"-20
    		0.438"25/64"
    		0.391"Slotted
    		594165A2470000094110A14000000————0
    3/8"-16
    		1/2"-20
    		0.500"29/64"
    		0.453"Slotted
    		194165A251000094110A15000000————0
    3/8"-24
    		1/2"-20
    		0.500"29/64"
    		0.453"Slotted
    		194165A255000094110A15000000————0
    7/16"-14
    		9/16"-18
    		0.563"33/64"
    		0.516"Slotted
    		194165A259000094110A16000000————0
    7/16"-20
    		9/16"-18
    		0.563"33/64"
    		0.516"Slotted
    		194165A263000094110A16000000————0
    1/2"-13
    		5/8"-18
    		0.625"37/64"
    		0.578"Slotted
    		194165A267000094110A17000000————0
    1/2"-20
    		5/8"-18
    		0.625"37/64"
    		0.578"Slotted
    		194165A271000094110A17000000————0
    5/8"-11
    		3/4"-16
    		0.687"11/16"
    		0.688"Slotted
    		194165A275000094110A19000000————0
    5/8"-18
    		3/4"-16
    		0.687"11/16"
    		0.688"Slotted
    		194165A279000094110A19000000————0
    M4 x 0.7 mm5/16"-24
    		0.313"I
    		0.272"Slotted
    		197120A280000094110A12000000————0
    M5 x 0.8 mm5/16"-24
    		0.313"I
    		0.272"Slotted
    		197120A290000094110A12000000————0
    M6 x 1 mm3/8"-24
    		0.375"Q
    		0.332"Slotted
    		197120A310000094110A14000000————0
    M8 x 1.25 mm7/16"-20
    		0.438"25/64"
    		0.391"Slotted
    		197120A320000094110A15000000————0
    M10 x 1.5 mm1/2"-20
    		0.500"29/64"
    		0.453"Slotted
    		197120A330000094110A16000000————0
    M12 x 1.75 mm5/8"-18
    		0.625"37/64"
    		0.578"Slotted
    		197120A340000094110A17000000————0
     
    Extra-Thick Wall
     
    Black Phosphate-Coated Steel
    1/4"-20
    		1/2"-13
    		0.484"27/64"
    		0.422"Slotted
    		1090246A0240000094110A14000000————0
    5/16"-18
    		9/16"-12
    		0.516"31/64"
    		0.484"Slotted
    		1090246A0270000094110A15000000————0
    3/8"-16
    		5/8"-11
    		0.656"17/32"
    		0.531"Slotted
    		590246A031000094110A16000000————0
    1/2"-13
    		7/8"-9
    		0.688"49/64"
    		0.766"Slotted
    		590246A03800000———0————0
    5/8"-11
    		1"-8
    		0.781"7/8"
    		0.875"Slotted
    		590246A04400000———0————0
     
    18-8 Stainless Steel
    1/4"-20
    		1/2"-13
    		0.484"27/64"
    		0.422"Slotted
    		194165A480000094110A14000000————0
    5/16"-18
    		9/16"-12
    		0.516"31/64"
    		0.484"Slotted
    		194165A490000094110A15000000————0
    3/8"-16
    		5/8"-11
    		0.656"17/32"
    		0.531"Slotted
    		194165A510000094110A16000000————0
     

    Mil.-Spec. Key-Locking Threaded Inserts For Soft Metal

    Image of Product. Bottom orientation. Threaded Inserts. Mil.-Spec. Key-Locking Threaded Inserts For Soft Metal.
    These inserts are manufactured and tested to meet or compare to strict standards adopted by the U.S. military. The keys drive into aluminum and other soft metal for a secure hold that won't slip or rotate, even in vibrating vehicle or aerospace parts. These inserts are comparable to Keensert inserts.
    To install, drill and tap a hole in your material. Then, thread the insert onto the installation tool and screw it into the hole. Place the tool over the keys and hit it with a hammer to drive them in.
    Standard Wall—Stronger than thin-wall inserts, these are your go-to choice for threading most holes.
    Thin Wall—Use these inserts near the edge of workpieces or wherever you only have space for a small hole. They're also lighter than standard and extra-thick wall inserts for applications with strict weight limitations.
    Extra-Thick Wall—Stronger than standard- and thin-wall inserts, use them to reduce the size of tapped holes or replace threads that have been drilled out.
    High-Strength Cadmium-Plated Alloy Steel—These inserts have the strength to stand up to high-pressure applications and a plating that helps screws thread in smoothly.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Inserts
    Installation
    Tools
    Thread Size
    For Tap Thread
    Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    No. of Locking
    Keys
    Specs. Met
    Each
    Each
    Standard Wall
     
    High-Strength Cadmium-Plated Alloy Steel
    8-32
    		5/16"-18
    		0.313"I
    		0.272"2NAS1395-0895101A1240000093904A505000000
    10-24
    		3/8"-16
    		0.313"Q
    		0.332"2MS51831A10195101A125000093904A51500000
    10-32
    		3/8"-16
    		0.313"Q
    		0.332"2MS51831A201, NAS1395-395101A10400000———0
    1/4"-20
    		7/16"-14
    		0.375"X
    		0.397"2MS51831A10295101A1050000093904A52500000
    1/4"-28
    		7/16"-14
    		0.375"X
    		0.397"2MS51831A202, NAS1395-495101A1140000———0
    5/16"-18
    		1/2"-13
    		0.438"29/64"
    		0.453"4MS51831A10395101A1060000093904A53500000
    5/16"-24
    		1/2"-13
    		0.438"29/64"
    		0.453"4MS51831A20395101A1260000———0
    3/8"-16
    		9/16"-12
    		0.500"33/64"
    		0.516"4MS51831A10495101A1070000093904A54500000
    3/8"-24
    		9/16"-12
    		0.500"33/64"
    		0.516"4MS51831A20495101A1270000———0
    7/16"-14
    		5/8"-11
    		0.625"37/64"
    		0.578"4MS51831A10595101A1280000093904A73900000
    7/16"-20
    		5/8"-11
    		0.625"37/64"
    		0.578"4MS51831A205, NAS1395-795101A1290000———0
    1/2"-13
    		11/16"-11
    		0.688"41/64"
    		0.641"4MS51831A10695101A1310000093904A55500000
    1/2"-20
    		11/16"-11
    		0.688"41/64"
    		0.641"4MS51831A206, NAS1395-895101A13200000———0
    9/16"-18
    		13/16"-16
    		0.813"49/64"
    		0.766"4MS51831A207, NAS1395-995101A13300000———0
    5/8"-11
    		7/8"-14
    		0.875"53/64"
    		0.828"4MS51831A10895101A1340000093904A74600000
    5/8"-18
    		7/8"-14
    		0.875"53/64"
    		0.828"4MS51831A20895101A13500000———0
    3/4"-10
    		1 1/8"-12
    		1.125"1 1/16"
    		1.062"4MS51831A10995101A1360000093904A748000000
    3/4"-16
    		1 1/8"-12
    		1.125"1 1/16"
    		1.062"4MS51831A20995101A13700000———0
    7/8"-9
    		1 1/4"-12
    		1.250"1 3/16"
    		1.187"4MS51831A11095101A1380000093904A751000000
    1"-8
    		1 3/8"-12
    		1.375"1 5/16"
    		1.312"4MS51831A11195101A1390000093904A753000000
    M5 x 0.8 mmM10 x 1.25 mm10 mm8.8 mm
    		8.8 mm2NA0150-05095101A1570000093904A78700000
    M6 x 1 mmM12 x 1.25 mm12 mm10.8 mm
    		10.8 mm2NA0150-06095101A1580000093904A78800000
    M8 x 1 mmM14 x 1.5 mm14 mm12.8 mm
    		12.8 mm4NA0150-08095101A1610000093904A78900000
    M10 x 1.25 mmM16 x 1.5 mm16 mm14.75 mm
    		14.75 mm4NA0150-10095101A1630000093904A79100000
    M16 x 1.5 mmM22 x 1.5 mm22 mm20.5 mm
    		20.5 mm4NA0150-16095101A1650000093904A79400000
     
    18-8 Stainless Steel
    8-32
    		5/16"-18
    		0.313"17/64"
    		0.276"2NAS1395C0893904A500000093904A50500000
    10-24
    		3/8"-16
    		0.313"Q
    		0.336"2MS51831-10193904A510000093904A51500000
    10-32
    		3/8"-16
    		0.313"Q
    		0.336"2MS51831-201, NAS1395C393904A5120000———0
    1/4"-20
    		7/16"-14
    		0.375"X
    		0.401"2MS51831-10293904A520000093904A52500000
    1/4"-28
    		7/16"-14
    		0.375"X
    		0.401"2MS51831-202, NAS1395C493904A5220000———0
    5/16"-18
    		1/2"-13
    		0.438"29/64"
    		0.457"4MS51831-10393904A530000093904A53500000
    5/16"-24
    		1/2"-13
    		0.438"29/64"
    		0.457"4MS51831-203, NAS1395C593904A5320000———0
    3/8"-16
    		9/16"-12
    		0.500"33/64"
    		0.521"4MS51831-10493904A540000093904A54500000
    3/8"-24
    		9/16"-12
    		0.500"33/64"
    		0.521"4MS51831-204, NAS1395C693904A5420000———0
    7/16"-14
    		5/8"-11
    		0.625"37/64"
    		0.583"4MS51831-10593904A226000093904A73900000
    7/16"-20
    		5/8"-11
    		0.625"37/64"
    		0.583"4MS51831-205, NAS1395C793904A2290000———0
    1/2"-13
    		11/16"-11
    		0.688"41/64"
    		0.646"4MS51831-10693904A5500000093904A55500000
    1/2"-20
    		11/16"-11
    		0.688"41/64"
    		0.646"4MS51831-206, NAS1395C893904A23200000———0
    9/16"-12
    		13/16"-16
    		0.813"49/64"
    		0.771"4MS51831-10793904A2340000093904A74400000
    9/16"-18
    		13/16"-16
    		0.813"49/64"
    		0.771"4MS51831-207, NAS1395C993904A23600000———0
    5/8"-11
    		7/8"-14
    		0.875"53/64"
    		0.833"4MS51831-10893904A2380000093904A74600000
    5/8"-18
    		7/8"-14
    		0.875"53/64"
    		0.833"4MS51831-208, NAS1395C1093904A24100000———0
    3/4"-10
    		1 1/8"-12
    		1.125"1 1/16"
    		1.067"4MS51831-10993904A2440000093904A748000000
    3/4"-16
    		1 1/8"-12
    		1.125"1 1/16"
    		1.067"4MS51831-20993904A24500000———0
    7/8"-9
    		1 1/4"-12
    		1.250"1 3/16"
    		1.192"4MS51831-11093904A2470000093904A751000000
    7/8"-14
    		1 1/4"-12
    		1.250"1 3/16"
    		1.192"4MS51831-21093904A24900000———0
    1"-8
    		1 3/8"-12
    		1.375"1 5/16"
    		1.317"4MS51831-11193904A2520000093904A753000000
    1"-12
    		1 3/8"-12
    		1.375"1 5/16"
    		1.317"4MS51831-21193904A2540000093904A753000000
     
    Thin Wall
     
    High-Strength Cadmium-Plated Alloy Steel
    2-56
    		8-32
    		0.125"29 Ga.
    		0.137"2MS51830A10195101A108000093904A15000000
    4-40
    		10-32
    		0.188"20 Ga.
    		0.164"2MS51830A10295101A1010000093904A25000000
    6-32
    		12-28
    		0.188"3/16"
    		0.190"2MS51830A10395101A1020000093904A35000000
    8-32
    		1/4"-28
    		0.250"1 Ga.
    		0.231"2MS51830A10495101A1030000093904A45000000
    10-24
    		5/16"-18
    		0.313"I
    		0.272"2MS51830A10595101A109000093904A60500000
    10-32
    		5/16"-18
    		0.313"I
    		0.272"2MS51830A201, NAS1394-395101A1110000———0
    1/4"-20
    		3/8"-16
    		0.375"Q
    		0.332"2MS51830A10695101A112000093904A61500000
    1/4"-28
    		3/8"-16
    		0.375"Q
    		0.332"2MS51830A202, NAS1394-495101A1130000———0
    5/16"-18
    		7/16"-14
    		0.438"X
    		0.397"4MS51830A10795101A115000093904A62500000
    5/16"-24
    		7/16"-14
    		0.438"X
    		0.397"4MS51830A203, NAS1394-595101A1160000———0
    3/8"-16
    		1/2"-13
    		0.500"29/64"
    		0.453"4MS51830A10895101A117000093904A63500000
    3/8"-24
    		1/2"-13
    		0.500"29/64"
    		0.453"4MS51830A204, NAS1394-695101A1180000———0
    7/16"-14
    		9/16"-12
    		0.563"33/64"
    		0.516"4MS51830A10995101A119000093904A72500000
    7/16"-20
    		9/16"-12
    		0.563"33/64"
    		0.516"4MS51830A205, NAS1394-795101A1210000———0
    1/2"-13
    		5/8"-11
    		0.625"37/64"
    		0.578"4MS51830A11095101A122000093904A64500000
    1/2"-20
    		5/8"-11
    		0.625"37/64"
    		0.578"4MS51830A206, NAS1394-895101A1230000———0
    M5 x 0.5 mmM8 x 1.25 mm8 mm6.9 mm
    		6.9 mm2—95101A146000093904A77900000
    M5 x 0.8 mmM8 x 1.25 mm8 mm6.9 mm
    		6.9 mm2NA0148-05095101A145000093904A77900000
    M6 x 0.75 mmM10 x 1.25 mm10 mm8.8 mm
    		8.8 mm2—95101A148000093904A78100000
    M6 x 1 mmM10 x 1.25 mm10 mm8.8 mm
    		8.8 mm2NA0148-6095101A1470000093904A78100000
    M8 x 1 mmM12 x 1.25 mm12 mm10.8 mm
    		10.8 mm4NA0148-08095101A1510000093904A78200000
    M8 x 1.25 mmM12 x 1.25 mm12 mm10.8 mm
    		10.8 mm4—95101A1490000093904A78200000
    M10 x 1.25 mmM14 x 1.5 mm14 mm12.8 mm
    		12.8 mm4NA0148-10095101A1530000093904A78300000
    M10 x 1.5 mmM14 x 1.5 mm14 mm12.8 mm
    		12.8 mm4NA0148-10095101A1520000093904A78300000
    M12 x 1.25 mmM16 x 1.5 mm16 mm14.75 mm
    		14.75 mm4NA0148-12095101A1550000093904A78400000
     
    18-8 Stainless Steel
    2-56
    		8-32
    		0.125"29 Ga.
    		0.137"2MS51830-10193904A100000093904A15000000
    4-40
    		10-32
    		0.172"20 Ga.
    		0.164"2MS51830-10293904A200000093904A25000000
    4-40
    		12-24
    		0.250"14 Ga.
    		0.183"2NAS1395C0493904A211000093904A25600000
    6-32
    		12-28
    		0.172"3/16"
    		0.190"2MS51830-10393904A300000093904A35000000
    6-32
    		1/4"-20
    		0.250"7/32"
    		0.216"2NAS1395C0693904A212000093904A25700000
    8-32
    		1/4"-20
    		0.250"7/32"
    		0.216"2NAS1394C0893904A213000093904A25700000
    8-32
    		1/4"-28
    		0.219"15/64"
    		0.231"2MS51830-10493904A400000093904A45000000
    10-24
    		5/16"-18
    		0.313"I
    		0.276"2MS51830-10593904A600000093904A60500000
    10-32
    		5/16"-18
    		0.313"I
    		0.276"2MS51830-201, NAS1394C393904A6120000———0
    1/4"-20
    		3/8"-16
    		0.375"Q
    		0.336"2MS51830-10693904A610000093904A61500000
    1/4"-28
    		3/8"-16
    		0.375"Q
    		0.336"2MS51830-202, NAS1394C493904A6220000———0
    5/16"-18
    		7/16"-14
    		0.438"X
    		0.401"4MS51830-10793904A620000093904A62500000
    5/16"-24
    		7/16"-14
    		0.438"X
    		0.401"4MS51830-203, NAS1394C593904A2140000———0
    3/8"-16
    		1/2"-13
    		0.500"29/64"
    		0.457"4MS51830-10893904A630000093904A63500000
    3/8"-24
    		1/2"-13
    		0.500"29/64"
    		0.457"4MS51830-204, NAS1394C693904A2150000———0
    7/16"-14
    		9/16"-12
    		0.563"33/64"
    		0.521"4MS51830-10993904A227000093904A72500000
    7/16"-20
    		9/16"-12
    		0.563"33/64"
    		0.521"4MS51830-205, NAS1394C793904A2160000———0
    1/2"-13
    		5/8"-11
    		0.625"37/64"
    		0.583"4MS51830-11093904A6400000093904A64500000
    1/2"-20
    		5/8"-11
    		0.625"37/64"
    		0.583"4MS51830-206, NAS1394C893904A2170000———0
     
    Extra-Thick Wall
     
    High-Strength Cadmium-Plated Alloy Steel
    3/8"-16
    		5/8"-11
    		0.500"37/64"
    		0.578"4MS51832A10495101A1410000093904A76200000
    1/2"-13
    		13/16"-16
    		0.688"49/64"
    		0.766"4MS51832A10695101A1420000093904A76600000
    5/8"-11
    		1"-12
    		0.875"15/16"
    		0.937"4MS51832A10895101A14300000093904A77100000
     
    18-8 Stainless Steel
    10-24
    		7/16"-14
    		0.313"X
    		0.401"2MS51832-10193904A2180000093904A75600000
    10-32
    		7/16"-14
    		0.313"X
    		0.401"2MS51832-20193904A2190000093904A75600000
    1/4"-20
    		1/2"-13
    		0.375"29/64"
    		0.453"4MS51832-10293904A3130000093904A31600000
    1/4"-28
    		1/2"-13
    		0.375"29/64"
    		0.457"4MS51832-20293904A22100000———0
    5/16"-18
    		9/16"-12
    		0.438"33/64"
    		0.521"4MS51832-10393904A2220000093904A26200000
    5/16"-24
    		9/16"-12
    		0.438"33/64"
    		0.521"4MS51832-20393904A22300000———0
    3/8"-16
    		5/8"-11
    		0.500"37/64"
    		0.583"4MS51832-10493904A2240000093904A76200000
    3/8"-24
    		5/8"-11
    		0.500"37/64"
    		0.583"4MS51832-20493904A2250000093904A26700000
    7/16"-14
    		11/16"-11
    		0.625"41/64"
    		0.646"4MS51832-10593904A2280000093904A27100000
    1/2"-13
    		13/16"-16
    		0.688"49/64"
    		0.771"4MS51832-10693904A2310000093904A76600000
    1/2"-20
    		13/16"-16
    		0.688"49/64"
    		0.771"4MS51832-20693904A2330000093904A27700000
    9/16"-12
    		7/8"-14
    		0.813"53/64"
    		0.833"4MS51832-10793904A2350000093904A27900000
    9/16"-18
    		7/8"-14
    		0.813"53/64"
    		0.833"4MS51832-20793904A23700000———0
    5/8"-11
    		1"-12
    		0.875"15/16"
    		0.942"4MS51832-10893904A2390000093904A77100000
    5/8"-18
    		1"-12
    		0.875"15/16"
    		0.942"4MS51832-20893904A2420000093904A28600000
    3/4"-10
    		1 1/4"-12
    		1.125"1 3/16"
    		1.192"4MS51832-10993904A2430000093904A77300000
    7/8"-9
    		1 3/8"-12
    		1.250"1 5/16"
    		1.317"4MS51832-11093904A2480000093904A77500000
    1"-8
    		1 1/2"-12
    		1.375"1 7/16"
    		1.442"4MS51832-11193904A2530000093904A77700000
     

    Tapered Heat-Set Threaded Inserts For Plastic

    Image of Product. Front orientation. Threaded Inserts. Tapered Heat-Set Threaded Inserts For Plastic.
    Tapered at one end, these inserts are easier to align in a hole during installation than straight inserts. Use a drill bit to create a straight hole, then taper the top half. Once installed, heat the insert with a soldering tip to melt the surrounding plastic.
    Brass—Conductive and nonmagnetic, these inserts are useful for electrical applications. They resist moisture but aren't as strong as steel inserts.
    Lightweight Aluminum—At one-third the weight of steel or brass, use these inserts in robotics, aerospace parts, and other applications with strict weight limits. They also resist rust about as well as stainless steel but aren't as strong. Since inserts are lead-free, they can be safely recycled.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals. Since they’re lead-free, they can be safely recycled.
    Inserts
    Soldering
    Installation Tips
    Extraction Tips
    Thread Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    For Hole
    Taper Angle
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    Each
    Each
    Brass
    0-80
    		0.115"3 mm
    		3 mm8°ASTM B1610093365A10200000092160A341000000———0
    0-80
    		0.188"36 Ga.
    		0.107"8°ASTM B165093365A2200000092160A34100000———0
    2-56
    		0.115"3 mm
    		3 mm8°ASTM B1610093365A1100000092160A311000092160A201000000
    2-56
    		0.188"36 Ga.
    		0.107"8°ASTM B1610093365A1120000092160A311000092160A20100000
    4-40
    		0.135"24 Ga.
    		0.153"8°ASTM B1610093365A1200000092160A315000092160A20300000
    4-40
    		0.219"9/64"
    		0.141"8°ASTM B1610093365A1220000092160A315000092160A20300000
    4-40
    		0.285"9/64"
    		0.141"8°ASTM B162593365A2300000092160A315000092160A20300000
    5-40
    		0.150"8 Ga.
    		0.199"8°ASTM B162593365A20100000———0———0
    5-40
    		0.250"13 Ga.
    		0.185"8°ASTM B162593365A20200000———0———0
    6-32
    		0.150"8 Ga.
    		0.199"8°ASTM B1610093365A1300000092160A319000092160A20500000
    6-32
    		0.250"13 Ga.
    		0.185"8°ASTM B1610093365A1320000092160A319000092160A20500000
    8-32
    		0.185"2 Ga.
    		0.226"8°ASTM B1610093365A1400000092160A323000092160A20700000
    8-32
    		0.312"5 Ga.
    		0.208"8°ASTM B165093365A1420000092160A323000092160A20700000
    8-32
    		0.375"5 Ga.
    		0.208"8°ASTM B162593365A311000092160A323000092160A20700000
    10-24
    		0.150"H
    		0.267"8°ASTM B165093365A3120000092160A327000092160A20900000
    10-24
    		0.225"H
    		0.267"8°ASTM B165093365A1500000092160A327000092160A20900000
    10-24
    		0.375"D
    		0.246"8°ASTM B165093365A1520000092160A327000092160A20900000
    10-32
    		0.150"H
    		0.267"8°ASTM B162593365A2400000092160A327000092160A21100000
    10-32
    		0.225"H
    		0.267"8°ASTM B165093365A1540000092160A327000092160A21100000
    10-32
    		0.375"D
    		0.246"8°ASTM B165093365A1560000092160A327000092160A21100000
    1/4"-20
    		0.300"S
    		0.349"8°ASTM B162593365A1600000092160A331000092160A21300000
    1/4"-20
    		0.500"O
    		0.321"8°ASTM B162593365A1620000092160A331000092160A21300000
    1/4"-28
    		0.300"S
    		0.349"8°ASTM B162593365A250000092160A331000092160A10700000
    1/4"-28
    		0.500"O
    		0.321"8°ASTM B162593365A2600000092160A331000092160A10700000
    5/16"-18
    		0.335"27/64"
    		0.431"8°ASTM B162593365A2700000092160A3080000092160A10500000
    5/16"-18
    		0.562"X
    		0.401"8°ASTM B161093365A280000092160A3080000092160A10500000
    5/16"-24
    		0.335"27/64"
    		0.431"8°ASTM B161093365A1630000092160A3080000092160A10600000
    5/16"-24
    		0.562"X
    		0.401"8°ASTM B162593365A3130000092160A3080000092160A10600000
    3/8"-16
    		0.375"33/64"
    		0.523"8°ASTM B161093365A290000092160A3090000092160A10400000
    3/8"-16
    		0.625"31/64"
    		0.488"8°ASTM B161093365A310000092160A3090000092160A10400000
    3/8"-24
    		0.375"33/64"
    		0.523"8°ASTM B162593365A3140000092160A30900000———0
    3/8"-24
    		0.625"31/64"
    		0.488"8°ASTM B161093365A315000092160A30900000———0
    M1.6 x 0.35 mm2.92 mm3 mm
    		3 mm8°ASTM B165094180A50100000———0———0
    M2 x 0.4 mm2.9 mm3 mm
    		3 mm8°ASTM B1610094180A3070000092160A3110000———0
    M2 x 0.4 mm4.8 mm2.7 mm
    		2.7 mm8°ASTM B1610094180A3120000092160A3110000———0
    M2.2 x 0.45 mm2.92 mm3 mm
    		3 mm8°ASTM B162594180A1010000———0———0
    M2.2 x 0.45 mm4.78 mm2.7 mm
    		2.7 mm8°ASTM B162594180A10200000———0———0
    M2.5 x 0.45 mm3.4 mm24 Ga.
    		0.152"8°ASTM B1610094180A3210000092160A315000092160A22500000
    M2.5 x 0.45 mm5.6 mm9/64"
    		0.141"8°ASTM B1610094180A3230000092160A315000092160A22500000
    M3 x 0.5 mm3.8 mm8 Ga.
    		0.199"8°ASTM B1610094180A3310000092160A315000092160A22700000
    M3 x 0.5 mm6.4 mm13 Ga.
    		0.185"8°ASTM B1610094180A3330000092160A315000092160A22700000
    M3.5 x 0.6 mm3.81 mm8 Ga.
    		0.199"8°ASTM B165094180A5020000092160A319000092160A10100000
    M3.5 x 0.6 mm6.35 mm13 Ga.
    		0.185"8°ASTM B165094180A5030000092160A319000092160A10100000
    M4 x 0.7 mm4.7 mm2 Ga.
    		0.226"8°ASTM B1610094180A3510000092160A323000092160A22900000
    M4 x 0.7 mm7.9 mm8 Ga.
    		0.208"8°ASTM B165094180A3530000092160A323000092160A22900000
    M5 x 0.8 mm6.7 mmN
    		0.303"8°ASTM B165094180A3610000092160A327000092160A23100000
    M5 x 0.8 mm11.1 mmJ
    		0.278"8°ASTM B162594180A3630000092160A327000092160A23100000
    M6 x 1 mm7.6 mmS
    		0.349"8°ASTM B162594180A3710000092160A327000092160A23300000
    M6 x 1 mm12.7 mmO
    		0.321"8°ASTM B162594180A3730000092160A327000092160A23300000
    M8 x 1.25 mm8.51 mm11 mm
    		11 mm8°ASTM B161094180A504000092160A3080000092160A10200000
    M8 x 1.25 mm14.3 mmX
    		0.401"8°ASTM B161094180A3860000092160A3080000092160A10200000
    M10 x 1.5 mm15.88 mm31/64"
    		0.488"8°ASTM B162594180A3870000092160A3090000092160A10300000
     
    Lightweight Aluminum
    2-56
    		0.115"3 mm
    		3 mm8°—2597164A103000092160A311000092160A20100000
    2-56
    		0.188"36 Ga.
    		0.107"8°—2597164A104000092160A311000092160A20100000
    4-40
    		0.135"24 Ga.
    		0.152"8°—2597164A107000092160A315000092160A20300000
    6-32
    		0.150"8 Ga.
    		0.199"8°—2597164A110000092160A319000092160A20500000
    6-32
    		0.250"13 Ga.
    		0.185"8°—2597164A111000092160A319000092160A20500000
    10-32
    		0.225"H
    		0.266"8°—2597164A1010000092160A327000092160A21100000
    10-32
    		0.375"D
    		0.246"8°—2597164A1020000092160A327000092160A21100000
    1/4"-20
    		0.300"S
    		0.348"8°—2597164A1050000092160A331000092160A21300000
    1/4"-20
    		0.500"O
    		0.321"8°—2597164A1060000092160A331000092160A21300000
    5/16"-18
    		0.335"27/64"
    		0.422"8°—1097164A108000092160A3080000092160A10500000
    3/8"-16
    		0.375"33/64"
    		0.516"8°—1097164A109000092160A3090000092160A10400000
    M3 x 0.5 mm3.43 mm24 Ga.
    		0.153"8°—2597164A112000092160A315000092160A22700000
    M3 x 0.5 mm3.81 mm8 Ga.
    		0.199"8°—2597164A1170000092160A315000092160A22700000
    M3 x 0.5 mm5.56 mm9/64"
    		0.141"8°—2597164A113000092160A315000092160A22700000
    M3.5 x 0.6 mm3.81 mm8 Ga.
    		0.199"8°—2597164A114000092160A319000092160A10100000
    M4 x 0.7 mm4.7 mm2 Ga.
    		0.226"8°—2597164A115000092160A323000092160A22900000
    M4 x 0.7 mm7.92 mm5 Ga.
    		0.208"8°—2597164A116000092160A323000092160A22900000
     
    18-8 Stainless Steel
    0-80
    		0.115"32 Ga.
    		0.118"8°ASTM A582197163A101000092160A34100000———0
    2-56
    		0.115"3 mm
    		3 mm8°ASTM A3801097163A132000092160A311000092160A20100000
    2-56
    		0.115"32 Ga.
    		0.118"8°ASTM A582197163A103000092160A311000092160A20100000
    2-56
    		0.188"36 Ga.
    		0.107"8°ASTM A3801097163A133000092160A311000092160A20100000
    4-40
    		0.135"24 Ga.
    		0.152"8°ASTM A3801097163A137000092160A315000092160A20300000
    4-40
    		0.135"24 Ga.
    		0.153"8°ASTM A582197163A105000092160A315000092160A20300000
    4-40
    		0.219"9/64"
    		0.141"8°ASTM A3801097163A138000092160A315000092160A20300000
    4-40
    		0.219"9/64"
    		0.141"8°ASTM A582197163A106000092160A315000092160A20300000
    4-40
    		0.285"9/64"
    		0.141"8°ASTM A582197163A107000092160A315000092160A20300000
    5-40
    		0.150"8 Ga.
    		0.199"8°ASTM A5822597163A20100000———0———0
    5-40
    		0.250"13 Ga.
    		0.185"8°ASTM A5822597163A20200000———0———0
    6-32
    		0.150"8 Ga.
    		0.199"8°ASTM A3801097163A142000092160A319000092160A20500000
    6-32
    		0.150"8 Ga.
    		0.199"8°ASTM A582597163A1080000092160A319000092160A20500000
    6-32
    		0.250"13 Ga.
    		0.185"8°ASTM A3801097163A143000092160A319000092160A20500000
    6-32
    		0.250"13 Ga.
    		0.185"8°ASTM A582597163A1090000092160A319000092160A20500000
    8-32
    		0.185"2 Ga.
    		0.221"8°ASTM A3801097163A144000092160A323000092160A20700000
    8-32
    		0.185"2 Ga.
    		0.226"8°ASTM A582597163A1100000092160A323000092160A20700000
    8-32
    		0.312"5 Ga.
    		0.208"8°ASTM A3801097163A145000092160A323000092160A20700000
    8-32
    		0.312"5 Ga.
    		0.208"8°ASTM A582597163A1110000092160A323000092160A20700000
    8-32
    		0.375"5 Ga.
    		0.208"8°ASTM A582597163A1120000092160A323000092160A20700000
    10-24
    		0.150"H
    		0.267"8°ASTM A582197163A113000092160A327000092160A20900000
    10-24
    		0.225"H
    		0.266"8°ASTM A3801097163A1290000092160A327000092160A20900000
    10-24
    		0.375"D
    		0.246"8°ASTM A582197163A114000092160A327000092160A20900000
    10-32
    		0.150"H
    		0.267"8°ASTM A582197163A115000092160A327000092160A21100000
    10-32
    		0.225"H
    		0.266"8°ASTM A3801097163A1300000092160A327000092160A21100000
    10-32
    		0.225"H
    		0.267"8°ASTM A582197163A116000092160A327000092160A21100000
    10-32
    		0.375"D
    		0.246"8°ASTM A3801097163A1310000092160A327000092160A21100000
    1/4"-20
    		0.300"S
    		0.348"8°ASTM A380597163A134000092160A331000092160A21300000
    1/4"-20
    		0.500"O
    		0.321"8°ASTM A380597163A1350000092160A331000092160A21300000
    1/4"-28
    		0.500"O
    		0.321"8°ASTM A380597163A1360000092160A331000092160A10700000
    1/4"-28
    		0.500"O
    		0.321"8°ASTM A582197163A117000092160A331000092160A10700000
    5/16"-18
    		0.335"27/64"
    		0.422"8°ASTM A380197163A139000092160A3080000092160A10500000
    5/16"-18
    		0.562"X
    		0.397"8°ASTM A380197163A140000092160A3080000092160A10500000
    5/16"-24
    		0.335"27/64"
    		0.431"8°ASTM A582197163A118000092160A3080000092160A10600000
    3/8"-16
    		0.375"33/64"
    		0.523"8°ASTM A582197163A120000092160A3090000092160A10400000
    3/8"-16
    		0.625"31/64"
    		0.484"8°ASTM A380197163A141000092160A3090000092160A10400000
    3/8"-24
    		0.375"33/64"
    		0.523"8°ASTM A582197163A121000092160A30900000———0
    3/8"-24
    		0.625"31/64"
    		0.488"8°ASTM A582197163A122000092160A30900000———0
    M1.6 x 0.35 mm2.92 mm32 Ga.
    		0.118"8°ASTM A582197163A1230000———0———0
    M2 x 0.4 mm2.92 mm3 mm
    		3 mm8°ASTM A3801097163A146000092160A3110000———0
    M2 x 0.4 mm4.78 mm36 Ga.
    		0.109"8°ASTM A582197163A124000092160A3110000———0
    M2.5 x 0.45 mm3.43 mm24 Ga.
    		0.153"8°ASTM A3801097163A147000092160A315000092160A22500000
    M2.5 x 0.45 mm5.56 mm9/64"
    		0.141"8°ASTM A3801097163A148000092160A315000092160A22500000
    M2.5 x 0.45 mm7.24 mm9/64"
    		0.141"8°ASTM A582197163A125000092160A315000092160A22500000
    M3 x 0.5 mm3.43 mm24 Ga.
    		0.152"8°ASTM A3802597163A1490000092160A315000092160A22700000
    M3 x 0.5 mm3.81 mm8 Ga.
    		0.217"8°ASTM A3801097163A160000092160A315000092160A22700000
    M3 x 0.5 mm5.56 mm9/64"
    		0.141"8°ASTM A3801097163A150000092160A315000092160A22700000
    M3 x 0.5 mm6.35 mm13 Ga.
    		0.185"8°ASTM A3801097163A161000092160A315000092160A22700000
    M3.5 x 0.6 mm6.35 mm13 Ga.
    		0.185"8°ASTM A3801097163A151000092160A319000092160A10100000
    M4 x 0.7 mm4.7 mm2 Ga.
    		0.226"8°ASTM A3801097163A152000092160A323000092160A22900000
    M4 x 0.7 mm7.92 mm5 Ga.
    		0.208"8°ASTM A3801097163A153000092160A323000092160A22900000
    M5 x 0.8 mm5.72 mmH
    		0.267"8°ASTM A3801097163A1540000092160A327000092160A23100000
    M5 x 0.8 mm6.71 mmN
    		0.303"8°ASTM A3801097163A1620000092160A327000092160A23100000
    M5 x 0.8 mm9.53 mmD
    		0.246"8°ASTM A3801097163A1550000092160A327000092160A23100000
    M5 x 0.8 mm11.1 mmJ
    		0.278"8°ASTM A380597163A163000092160A327000092160A23100000
    M6 x 1 mm7.62 mmS
    		0.349"8°ASTM A380597163A156000092160A327000092160A23300000
    M6 x 1 mm12.7 mmO
    		0.321"8°ASTM A380597163A157000092160A327000092160A23300000
    M8 x 1.25 mm8.51 mm27/64"
    		0.431"8°ASTM A380197163A158000092160A3080000092160A10200000
    M8 x 1.25 mm14.27 mmX
    		0.401"8°ASTM A380197163A159000092160A3080000092160A10200000
    M10 x 1.5 mm9.53 mm33/64"
    		0.523"8°ASTM A582197163A127000092160A3090000092160A10300000
    M10 x 1.5 mm15.88 mm31/64"
    		0.488"8°ASTM A582197163A128000092160A3090000092160A10300000
     
    Soldering Irons
    Each
    Economy Soldering Iron, 60W7662A696000000

    Tapping Threaded Inserts for Softwood

    The large external threads on these inserts cut and grab softwood for a secure hold. They install in one step, so they’re ideal for producing a lot of threaded connections fast. A drill and installation bit is the quickest method, or use a hex driver for smaller or one-off jobs.
    Flanged Profile—Flanges on the insert create a load-bearing surface that prevents cracks or deformation in the base material. They also curb overtightening and keep inserts from getting pulled out or through.
    Zinc Alloy—Soft enough to cut into wood without splitting it, these inserts also resist occasional moisture.
    Inserts
    Installation
    Tools
    Flange
    Drive
    Thread Size
    Installed
    Lg.
    Dia.
    Thick.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Style
    Size,
    mm
    Pkg.
    Qty.
    Pkg.
    Each
    Standard Profile
    Image of Product. Standard. Bottom orientation. Threaded Inserts. Tapping Threaded Inserts for Softwood, Standard Profile.

    Standard

     
    Zinc Alloy
    6-32
    		0.375"——7/32"
    		0.219"Hex
    		35092105A10100000———0
    8-32
    		0.391"——15/64"
    		0.234"Hex
    		410092105A6600000096924A110000000
    10-24
    		0.391"——9/32"
    		0.281"Hex
    		510092105A1020000096924A22000000
    10-24
    		0.516"——9/32"
    		0.281"Hex
    		55092105A665000096924A22000000
    10-32
    		0.391"——9/32"
    		0.281"Hex
    		510092105A1030000096924A22000000
    10-32
    		0.516"——9/32"
    		0.281"Hex
    		55092105A670000096924A22000000
    1/4"-20
    		0.391"——23/64"
    		0.359"Hex
    		610092105A1040000096924A33000000
    1/4"-20
    		0.516"——23/64"
    		0.359"Hex
    		610092105A6750000096924A33000000
    1/4"-20
    		0.781"——23/64"
    		0.359"Hex
    		65092105A6760000096924A33000000
    5/16"-18
    		0.500"——7/16"
    		0.438"Hex
    		85092105A1050000096924A45000000
    5/16"-18
    		0.781"——7/16"
    		0.438"Hex
    		85092105A6780000096924A45000000
    5/16"-18
    		0.984"——7/16"
    		0.438"Hex
    		82592105A7790000096924A45000000
    M4 x 0.7 mm10 mm——6 mm
    		6 mmHex
    		410092105A1060000096924A11000000
    M6 x 1 mm13 mm——9 mm
    		9 mmHex
    		65095596A100000096924A33000000
    M6 x 1 mm20 mm——9 mm
    		9 mmHex
    		65095596A110000096924A33000000
    M8 x 1.25 mm13 mm——11 mm
    		11 mmHex
    		82595596A200000096924A45000000
    M8 x 1.25 mm20 mm——11 mm
    		11 mmHex
    		82595596A210000096924A45000000
     
    Flanged Profile
    Image of Product. Flanged. Bottom orientation. Threaded Inserts. Tapping Threaded Inserts for Softwood, Flanged Profile.

    Flanged

     
    Zinc Alloy
    8-32
    		0.391"0.335"0.025"15/64"
    		0.234"Hex
    		410092105A0020000096924A11000000
    8-32
    		0.781"0.335"0.03"15/64"
    		0.234"Hex
    		42592105A020000096924A11000000
    10-24
    		0.391"0.453"0.03"9/32"
    		0.281"Hex
    		55092105A006000096924A22000000
    10-24
    		0.516"0.453"0.043"5/16"
    		0.313"Hex
    		55092105A021000096924A22000000
    10-24
    		0.781"0.453"0.03"9/32"
    		0.281"Hex
    		55092105A0100000096924A22000000
    10-32
    		0.391"0.453"0.03"9/32"
    		0.281"Hex
    		55092105A014000096924A22000000
    10-32
    		0.516"0.453"0.03"9/32"
    		0.281"Hex
    		55092105A016000096924A22000000
    10-32
    		0.781"0.453"0.03"9/32"
    		0.281"Hex
    		52592105A018000096924A22000000
    1/4"-20
    		0.391"0.492"0.043"23/64"
    		0.359"Hex
    		65092105A022000096924A33000000
    1/4"-20
    		0.516"0.492"0.03"23/64"
    		0.359"Hex
    		610092105A1000000096924A33000000
    1/4"-20
    		0.625"0.492"0.038"23/64"
    		0.359"Hex
    		62592105A208000096924A33000000
    1/4"-20
    		0.781"0.492"0.04"23/64"
    		0.359"Hex
    		65092105A2000000096924A33000000
    1/4"-20
    		0.984"0.492"0.04"23/64"
    		0.359"Hex
    		65092105A3000000096924A33000000
    5/16"-18
    		0.516"0.571"0.03"7/16"
    		0.438"Hex
    		85092105A4100000096924A45000000
    5/16"-18
    		0.781"0.571"0.062"7/16"
    		0.438"Hex
    		82592105A023000096924A45000000
    5/16"-18
    		0.984"0.571"0.03"7/16"
    		0.438"Hex
    		82592105A4150000096924A45000000
    3/8"-16
    		0.516"0.63"0.03"15/32"
    		0.469"Hex
    		102592105A4200000096924A56000000
    3/8"-16
    		0.781"0.626"0.03"15/32"
    		0.469"Hex
    		102592105A2010000096924A56000000
    3/8"-16
    		0.984"0.625"0.04"15/32"
    		0.469"Hex
    		102592105A4300000096924A56000000
    M4 x 0.7 mm10 mm8 mm0.5 mm6 mm
    		6 mmHex
    		410095596A202000096924A11000000
    M5 x 0.8 mm10 mm11.5 mm1.1 mm7.9 mm
    		7.9 mmHex
    		55095596A203000096924A22000000
    M5 x 0.8 mm13 mm11.5 mm1.1 mm7.9 mm
    		7.9 mmHex
    		52595596A204000096924A22000000
    M6 x 1 mm10 mm12.5 mm1.1 mm9.1 mm
    		9.1 mmHex
    		62595596A205000096924A33000000
    M6 x 1 mm13 mm12 mm0.635 mm9 mm
    		9 mmHex
    		65095596A500000096924A33000000
    M6 x 1 mm16 mm12.5 mm1 mm9.1 mm
    		9.1 mmHex
    		62595596A206000096924A33000000
    M6 x 1 mm20 mm12 mm0.762 mm9 mm
    		9 mmHex
    		65095596A510000096924A33000000
    M8 x 1.25 mm13 mm15 mm1.016 mm11 mm
    		11 mmHex
    		82595596A600000096924A45000000
    M8 x 1.25 mm20 mm15 mm1.016 mm11 mm
    		11 mmHex
    		82595596A610000096924A45000000
    M8 x 1.25 mm25 mm14.5 mm1.2 mm11 mm
    		11 mmHex
    		81095596A207000096924A45000000
    M10 x 1.5 mm13 mm16 mm0.8 mm12 mm
    		12 mmHex
    		102595596A310000096924A56000000
    M10 x 1.5 mm25 mm16 mm0.8 mm12 mm
    		12 mmHex
    		102595596A3200000096924A56000000
     

    Screw-to-Expand Press-In Threaded Inserts for Plastic

    Press these inserts into a drilled hole, then install a screw to expand them. Inserts won't lose their strength as you remove and reinsert screws during inspection or repair. The sharp diamond knurls dig into the surrounding material for a stronger hold than other press-in inserts for plastic. Install inserts with an arbor press or similar pressure tool.
    Flanged Profile—Flanges on the insert create a load-bearing surface that prevents cracks or deformation in the base material. They also curb overtightening and keep inserts from getting pulled out or through.
    Brass—Conductive and nonmagnetic, these inserts are useful for electrical applications. They resist moisture but aren't as strong as steel inserts.
    Lightweight Aluminum—At one-third the weight of steel or brass, use these inserts in robotics, aerospace parts, and other applications with strict weight limits. They also resist rust about as well as stainless steel but aren't as strong. Since inserts are lead-free, they can be safely recycled.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals. Since they’re lead-free, they can be safely recycled.
    Flange
    Thread Size
    Installed
    Lg.
    Dia.
    Thick.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Pkg.
    Qty.
    Pkg.
    Standard Profile
    Image of Product. Bottom orientation. Threaded Inserts. Screw-to-Expand Press-In Threaded Inserts for Plastic, Standard Profile.
     
    Brass
    0-80
    		0.125"——3/32"
    		0.094"2592395A10900000
    2-56
    		0.156"——1/8"
    		0.125"5092395A11100000
    4-40
    		0.188"——5/32"
    		0.156"5092395A11200000
    4-40
    		0.250"——5/32"
    		0.156"2592395A6110000
    6-32
    		0.250"——3/16"
    		0.188"5092395A11300000
    6-32
    		0.313"——3/16"
    		0.188"2592395A6120000
    8-32
    		0.250"——7/32"
    		0.219"2592395A6130000
    8-32
    		0.313"——7/32"
    		0.219"5092395A11400000
    10-24
    		0.375"——1/4"
    		0.250"2592395A5130000
    10-32
    		0.250"——1/4"
    		0.250"2592395A2240000
    10-32
    		0.375"——1/4"
    		0.250"2592395A5150000
    1/4"-20
    		0.438"——5/16"
    		0.313"2592395A4010000
    1/4"-20
    		0.500"——5/16"
    		0.313"2592395A1160000
    5/16"-18
    		0.563"——3/8"
    		0.375"1092395A0300000
    3/8"-16
    		0.625"——7/16"
    		0.438"1092395A0310000
    M2 x 0.4 mm4 mm——3.2 mm
    		3.2 mm1094510A6110000
    M2.5 x 0.45 mm4.8 mm——4 mm
    		4 mm1094510A6120000
    M3 x 0.5 mm4.8 mm——4 mm
    		4 mm5094510A03000000
    M3 x 0.5 mm6.4 mm——4 mm
    		4 mm2594510A4110000
    M3.5 x 0.6 mm6.4 mm——4.8 mm
    		4.8 mm5094510A03500000
    M4 x 0.7 mm6.4 mm——5.6 mm
    		5.6 mm2594510A4120000
    M4 x 0.7 mm8 mm——5.6 mm
    		5.6 mm2594510A0400000
    M5 x 0.8 mm8 mm——6.4 mm
    		6.4 mm2594510A40200000
    M5 x 0.8 mm9.5 mm——6.4 mm
    		6.4 mm2594510A0450000
    M6 x 1 mm11.1 mm——8 mm
    		8 mm2594510A40300000
    M6 x 1 mm12.7 mm——8 mm
    		8 mm2594510A05000000
    M8 x 1.25 mm12.7 mm——9.5 mm
    		9.5 mm194510A6130000
     
    Lightweight Aluminum
    2-56
    		0.156"——1/8"
    		0.125"2590742A1140000
    4-40
    		0.188"——5/32"
    		0.156"2590742A1150000
    4-40
    		0.250"——5/32"
    		0.156"2590742A1160000
    6-32
    		0.250"——3/16"
    		0.188"2590742A1170000
    6-32
    		0.313"——3/16"
    		0.188"2590742A1180000
    8-32
    		0.250"——7/32"
    		0.219"2590742A1190000
    8-32
    		0.313"——7/32"
    		0.219"2590742A1200000
    10-24
    		0.375"——1/4"
    		0.250"2590742A13100000
    10-32
    		0.313"——1/4"
    		0.250"2590742A1100000
    10-32
    		0.375"——1/4"
    		0.250"2590742A11100000
    1/4"-20
    		0.438"——5/16"
    		0.313"2590742A1120000
    1/4"-20
    		0.500"——5/16"
    		0.313"2590742A11300000
    5/16"-18
    		0.563"——3/8"
    		0.375"1090742A1320000
    3/8"-16
    		0.625"——7/16"
    		0.438"1090742A1330000
    M3 x 0.5 mm4.8 mm——4 mm
    		4 mm2590742A1210000
    M3 x 0.5 mm6.4 mm——4 mm
    		4 mm2590742A1220000
    M4 x 0.7 mm6.4 mm——5.6 mm
    		5.6 mm2590742A1230000
    M4 x 0.7 mm8 mm——5.6 mm
    		5.6 mm2590742A1240000
    M5 x 0.8 mm8 mm——6.4 mm
    		6.4 mm2590742A1250000
    M5 x 0.8 mm9.5 mm——6.4 mm
    		6.4 mm2590742A1260000
    M6 x 1 mm11.1 mm——8 mm
    		8 mm2590742A12700000
    M6 x 1 mm12.7 mm——8 mm
    		8 mm2590742A12800000
    M8 x 1.25 mm14.3 mm——9.5 mm
    		9.5 mm1090742A1340000
    M10 x 1.5 mm15.88 mm——11.1 mm
    		11.1 mm1090742A1350000
     
    18-8 Stainless Steel
    2-56
    		0.156"——1/8"
    		0.125"1092394A1110000
    4-40
    		0.188"——5/32"
    		0.156"1092394A11200000
    6-32
    		0.250"——3/16"
    		0.188"1092394A11300000
    8-32
    		0.250"——7/32"
    		0.219"592394A2110000
    8-32
    		0.313"——7/32"
    		0.219"592394A1140000
    10-24
    		0.375"——1/4"
    		0.250"592394A1010000
    10-32
    		0.250"——1/4"
    		0.250"592394A2120000
    10-32
    		0.375"——1/4"
    		0.250"592394A51500000
    1/4"-20
    		0.500"——5/16"
    		0.313"592394A11600000
    5/16"-18
    		0.563"——3/8"
    		0.375"592394A03000000
    3/8"-16
    		0.625"——7/16"
    		0.438"192394A0310000
    M3 x 0.5 mm4.8 mm——4 mm
    		4 mm592394A1020000
    M4 x 0.7 mm8 mm——5.6 mm
    		5.6 mm592394A1030000
    M5 x 0.8 mm9.5 mm——6.4 mm
    		6.4 mm592394A1040000
    M6 x 1 mm12.7 mm——8 mm
    		8 mm192394A1050000
    M8 x 1.25 mm12.7 mm——9.5 mm
    		9.5 mm592394A2130000
     
    Flanged Profile
    Image of Product. Bottom orientation. Threaded Inserts. Screw-to-Expand Press-In Threaded Inserts for Plastic, Flanged Profile.
     
    Brass
    2-56
    		0.156"0.187"0.02"1/8"
    		0.125"5094615A11100000
    4-40
    		0.188"0.218"0.02"5/32"
    		0.156"5094615A11200000
    4-40
    		0.250"0.218"0.02"5/32"
    		0.156"2594615A2110000
    6-32
    		0.250"0.249"0.03"3/16"
    		0.188"5094615A11300000
    6-32
    		0.281"1/4"0.03"3/16"
    		0.188"1094615A3010000
    8-32
    		0.281"0.28"0.03"7/32"
    		0.219"2594615A2120000
    8-32
    		0.313"0.28"0.03"7/32"
    		0.219"5094615A11400000
    10-32
    		0.313"0.312"0.04"1/4"
    		0.250"2594615A21300000
    10-32
    		0.375"0.312"0.04"1/4"
    		0.250"2594615A1150000
    1/4"-20
    		0.438"3/8"0.05"5/16"
    		0.313"1094615A2140000
    1/4"-20
    		0.500"3/8"0.05"5/16"
    		0.313"2594615A11600000
    5/16"-18
    		0.563"0.437"0.05"3/8"
    		0.375"1094615A1170000
    3/8"-16
    		0.625"1/2"0.06"7/16"
    		0.438"1094615A1180000
    M3 x 0.5 mm4.8 mm5.5 mm0.51 mm4 mm
    		4 mm5094510A24000000
    M3 x 0.5 mm6.3 mm5.5 mm0.51 mm4 mm
    		4 mm2594510A5110000
    M4 x 0.7 mm7.1 mm7.1 mm0.81 mm5.6 mm
    		5.6 mm2594510A5120000
    M4 x 0.7 mm8 mm7.1 mm0.81 mm5.6 mm
    		5.6 mm5094510A24500000
    M5 x 0.8 mm7.9 mm7.9 mm1.09 mm6.4 mm
    		6.4 mm1094510A3020000
    M5 x 0.8 mm9.5 mm7.9 mm0.99 mm6.4 mm
    		6.4 mm2594510A2500000
    M6 x 1 mm11.1 mm9.5 mm1.27 mm8 mm
    		8 mm1094510A3030000
    M6 x 1 mm12.7 mm9.5 mm1.25 mm8 mm
    		8 mm2594510A2550000
    M8 x 1.25 mm14.3 mm11.1 mm1.25 mm9.5 mm
    		9.5 mm1094510A2600000
     
    Lightweight Aluminum
    2-56
    		0.156"3/16"0.02"1/8"
    		0.125"2590741A1500000
    4-40
    		0.186"7/32"0.02"5/32"
    		0.156"2590741A1600000
    4-40
    		0.248"7/32"0.02"5/32"
    		0.156"2590741A1700000
    6-32
    		0.252"1/4"0.03"3/16"
    		0.188"2590741A1800000
    6-32
    		0.283"1/4"0.03"3/16"
    		0.188"2590741A1900000
    8-32
    		0.286"9/32"0.04"7/32"
    		0.219"2590741A2100000
    8-32
    		0.318"9/32"0.04"7/32"
    		0.219"2590741A2200000
    10-24
    		0.375"5/16"0.03"1/4"
    		0.250"1090741A8220000
    10-32
    		0.310"5/16"0.04"1/4"
    		0.250"2590741A1100000
    10-32
    		0.372"5/16"0.04"1/4"
    		0.250"2590741A1200000
    1/4"-20
    		0.438"3/8"0.05"5/16"
    		0.313"2090741A13000000
    1/4"-20
    		0.500"3/8"0.05"5/16"
    		0.313"2090741A14000000
    5/16"-18
    		0.563"7/16"0.03"3/8"
    		0.375"1090741A82300000
    3/8"-16
    		0.625"1/2"0.03"7/16"
    		0.438"1090741A82400000
    M3 x 0.5 mm4.78 mm5.6 mm0.56 mm4 mm
    		4 mm2590741A2300000
    M3 x 0.5 mm6.36 mm5.6 mm0.56 mm4 mm
    		4 mm2590741A2400000
    M4 x 0.7 mm7.14 mm7.1 mm0.89 mm5.6 mm
    		5.6 mm2590741A2500000
    M4 x 0.7 mm7.95 mm7.1 mm0.89 mm5.6 mm
    		5.6 mm2590741A2600000
    M5 x 0.8 mm7.95 mm8 mm1.09 mm6.4 mm
    		6.4 mm2590741A2700000
    M5 x 0.8 mm9.52 mm8 mm1.09 mm6.4 mm
    		6.4 mm2590741A2800000
    M6 x 1 mm11.13 mm9.5 mm1.27 mm8 mm
    		8 mm2590741A29000000
    M6 x 1 mm12.7 mm9.5 mm1.27 mm8 mm
    		8 mm2590741A31000000
    M8 x 1.25 mm14.3 mm11.1 mm0.76 mm9.5 mm
    		9.5 mm1090741A82500000
    M10 x 1.5 mm15.88 mm12.7 mm0.76 mm11.1 mm
    		11.1 mm1090741A82600000
     
    18-8 Stainless Steel
    2-56
    		0.156"0.187"0.02"1/8"
    		0.125"1095110A11100000
    4-40
    		0.188"0.218"0.02"5/32"
    		0.156"1095110A11000000
    6-32
    		0.250"0.249"0.02"3/16"
    		0.188"1095110A11300000
    8-32
    		0.313"0.28"0.02"7/32"
    		0.219"595110A1140000
    10-32
    		0.375"0.312"0.03"1/4"
    		0.250"595110A11500000
    1/4"-20
    		0.500"3/8"0.03"5/16"
    		0.313"595110A11600000
    5/16"-18
    		0.563"0.437"0.06"3/8"
    		0.375"595110A11700000
    3/8"-16
    		0.625"1/2"0.06"15/32"
    		0.469"595110A11800000
    M3 x 0.5 mm4.8 mm5.5 mm0.51 mm4 mm
    		4 mm595110A1010000
    M4 x 0.7 mm8 mm7.1 mm0.81 mm5.6 mm
    		5.6 mm595110A1020000
    M5 x 0.8 mm9.5 mm7.9 mm0.99 mm6.4 mm
    		6.4 mm595110A1030000
    M6 x 1 mm12.7 mm9.5 mm1.25 mm8 mm
    		8 mm195110A1040000
    M8 x 1.25 mm14.3 mm11.1 mm1.52 mm9.9 mm
    		9.9 mm595110A10500000
     

    Screw-Locking Helical Threaded Inserts

    The irregularly shaped threads tightly grip screws to prevent them from loosening or backing out under vibration. Use these inserts to create or repair threads in pumps and other machinery that shakes and rattles. Also known as Heli-Coil inserts.
    Installation requires a drill bit, a helical insert tap, and an installation tool.
    Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.
    Prongless—Without a prong to break off and retrieve, these inserts save time and avoid leftover debris in holes.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Inserts
    Through-Hole
    Taps
    Closed-End
    Hole Taps
    Installation
    Tools
    Prong
    Break-Off Tools
    Thread Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Each
    Each
    Each
    Each
    Pronged
    Image of Product. Pronged. Bottom orientation. Threaded Inserts. Screw-Locking Helical Threaded Inserts, Pronged.

    Pronged

     
    18-8 Stainless Steel
    1-64
    		0.073"46 Ga.
    		0.081"—590296A0040000091709A09000000091709A68300000090261A131000000092955A2010000000
    1-64
    		0.110"46 Ga.
    		0.081"—590296A008000091709A0900000091709A6830000090261A13100000092955A201000000
    2-56
    		0.086"41 Ga.
    		0.096"MS21209C0210, NASM212091090296A094000091709A0980000091709A4010000090261A1400000092955A101000000
    2-56
    		0.129"41 Ga.
    		0.096"MS21209C0215, NASM212091090296A095000091709A0980000091709A4010000090261A1400000092955A101000000
    2-56
    		0.172"41 Ga.
    		0.096"MS21209C0220, NASM212091090296A097000091709A0980000091709A4010000090261A1400000092955A101000000
    2-56
    		0.215"41 Ga.
    		0.096"MS21209C0225, NASM21209190296A099000091709A0980000091709A4010000090261A1400000092955A101000000
    3-48
    		0.099"7/64"
    		0.109"MS21209C0310, NASM21209590296A184000091709A0990000091709A4040000090261A15000000092955A101000000
    3-48
    		0.148"7/64"
    		0.109"MS21209C0315, NASM212091090296A098000091709A0990000091709A4040000090261A15000000092955A101000000
    3-56
    		0.099"36 Ga.
    		0.107"MS21209F0310, NASM212091090296A012000091709A0550000091709A4030000090261A10100000092955A101000000
    3-56
    		0.148"36 Ga.
    		0.107"MS21209F0315, NASM21209590296A185000091709A0550000091709A4030000090261A10100000092955A101000000
    4-40
    		0.112"31 Ga.
    		0.120"MS21209C0410, NASM212091090296A101000091709A1010000091709A4070000090261A15100000092955A103000000
    4-40
    		0.168"31 Ga.
    		0.120"MS21209C0415, NASM212091090296A102000091709A1010000091709A4070000090261A15100000092955A103000000
    4-40
    		0.224"31 Ga.
    		0.120"MS21209C0420, NASM21209590296A103000091709A1010000091709A4070000090261A15100000092955A103000000
    4-40
    		0.280"31 Ga.
    		0.120"MS21209C0425, NASM21209590296A104000091709A1010000091709A4070000090261A15100000092955A103000000
    4-40
    		0.336"31 Ga.
    		0.120"MS21209C0430, NASM21209190296A445000091709A1010000091709A4070000090261A15100000092955A103000000
    4-48
    		0.112"31 Ga.
    		0.120"MS21209F0410, NASM212091090296A016000091709A0570000091709A4100000090261A10200000092955A103000000
    4-48
    		0.168"31 Ga.
    		0.120"MS21209F0415, NASM212091090296A018000091709A0570000091709A4100000090261A10200000092955A103000000
    5-40
    		0.125"29 Ga.
    		0.136"MS21209C0510, NASM212091090296A020000091709A0610000091709A4130000090261A10400000092955A103000000
    5-40
    		0.188"29 Ga.
    		0.136"MS21209C0515, NASM212091090296A022000091709A0610000091709A4130000090261A10400000092955A103000000
    5-40
    		0.250"29 Ga.
    		0.136"MS21209C0520, NASM21209590296A023000091709A0610000091709A4130000090261A10400000092955A103000000
    6-32
    		0.138"25 Ga.
    		0.150"MS21209C0610, NASM212091090296A106000091709A1020000091709A4160000090261A15200000092955A10500000
    6-32
    		0.207"25 Ga.
    		0.150"MS21209C0615, NASM212091090296A107000091709A1020000091709A4160000090261A15200000092955A10500000
    6-32
    		0.276"25 Ga.
    		0.150"MS21209C0620, NASM21209590296A108000091709A1020000091709A4160000090261A15200000092955A10500000
    6-32
    		0.345"25 Ga.
    		0.150"MS21209C0625, NASM21209590296A109000091709A1020000091709A4160000090261A15200000092955A10500000
    6-32
    		0.414"25 Ga.
    		0.150"MS21209C0630, NASM21209190296A450000091709A1020000091709A4160000090261A15200000092955A10500000
    6-40
    		0.138"25 Ga.
    		0.150"MS21209F0610, NASM212091090296A024000091709A0630000091709A4190000090261A10600000092955A10500000
    6-40
    		0.207"25 Ga.
    		0.150"MS21209F0615, NASM21209590296A189000091709A0630000091709A4190000090261A10600000092955A10500000
    6-40
    		0.276"25 Ga.
    		0.150"MS21209F0620, NASM21209590296A190000091709A0630000091709A4190000090261A10600000092955A10500000
    8-32
    		0.164"16 Ga.
    		0.177"MS21209C0810, NASM212091090296A111000091709A1030000091709A4220000090261A15300000092955A10700000
    8-32
    		0.246"16 Ga.
    		0.177"MS21209C0815, NASM212091090296A112000091709A1030000091709A4220000090261A15300000092955A10700000
    8-32
    		0.328"16 Ga.
    		0.177"MS21209C0820, NASM212091090296A551000091709A1030000091709A4220000090261A15300000092955A10700000
    8-32
    		0.410"16 Ga.
    		0.177"MS21209C0825, NASM21209190296A552000091709A1030000091709A4220000090261A15300000092955A10700000
    8-32
    		0.492"16 Ga.
    		0.177"MS21209C0830, NASM21209190296A440000091709A1030000091709A4220000090261A15300000092955A10700000
    8-36
    		0.164"16 Ga.
    		0.177"MS21209F0810, NASM212091090296A028000091709A0650000091709A4250000090261A14900000092955A10700000
    8-36
    		0.246"16 Ga.
    		0.177"MS21209F0815, NASM212091090296A030000091709A0650000091709A4250000090261A14900000092955A10700000
    8-36
    		0.328"16 Ga.
    		0.177"MS21209F0820, NASM21209590296A193000091709A0650000091709A4250000090261A14900000092955A10700000
    10-24
    		0.190"5 Ga.
    		0.206"MS21209C1-10, NASM212091090296A116000091709A1040000091709A4280000090261A15400000092955A10900000
    10-24
    		0.285"5 Ga.
    		0.206"MS21209C1-15, NASM212091090296A117000091709A1040000091709A4280000090261A15400000092955A10900000
    10-24
    		0.380"5 Ga.
    		0.206"MS21209C1-20, NASM21209590296A118000091709A1040000091709A4280000090261A15400000092955A10900000
    10-24
    		0.475"5 Ga.
    		0.206"MS21209C1-25, NASM21209190296A119000091709A1040000091709A4280000090261A15400000092955A10900000
    10-32
    		0.190"13/64"
    		0.203"MS21209F1-101090296A201000091709A1510000091709A4310000090261A16100000092955A10900000
    10-32
    		0.285"13/64"
    		0.203"MS21209F1-15, NASM212091090296A202000091709A1510000091709A4310000090261A16100000092955A10900000
    10-32
    		0.380"13/64"
    		0.203"MS21209F1-20, NASM212091090296A554000091709A1510000091709A4310000090261A16100000092955A10900000
    10-32
    		0.475"13/64"
    		0.203"MS21209F1-25, NASM21209190296A105000091709A1510000091709A4310000090261A16100000092955A10900000
    10-32
    		0.570"13/64"
    		0.203"MS21209F1-30, NASM21209190296A555000091709A1510000091709A4310000090261A16100000092955A10900000
    12-24
    		0.216"1 Ga.
    		0.228"MS21209C2-10, NASM212091090296A0320000091709A0670000091709A4340000090261A11000000092955A10900000
    12-24
    		0.324"1 Ga.
    		0.228"MS21209C2-15, NASM212091090296A0340000091709A0670000091709A4340000090261A11000000092955A10900000
    1/4"-20
    		0.250"H
    		0.266"MS21209C4-10, NASM212091090296A121000091709A1050000091709A4370000090261A15500000092955A11100000
    1/4"-20
    		0.375"H
    		0.266"MS21209C4-15, NASM212091090296A122000091709A1050000091709A4370000090261A15500000092955A11100000
    1/4"-20
    		0.500"H
    		0.266"MS21209C4-20, NASM212091090296A557000091709A1050000091709A4370000090261A15500000092955A11100000
    1/4"-20
    		0.625"H
    		0.266"MS21209C4-25, NASM21209190296A558000091709A1050000091709A4370000090261A15500000092955A11100000
    1/4"-20
    		0.750"H
    		0.266"MS21209C4-30, NASM21209190296A559000091709A1050000091709A4370000090261A15500000092955A11100000
    1/4"-28
    		0.250"6.7 mm
    		6.7 mmMS21209F4-10, NASM212091090296A206000091709A1520000091709A4400000090261A16200000092955A11100000
    1/4"-28
    		0.375"6.7 mm
    		6.7 mmMS21209F4-15, NASM212091090296A207000091709A1520000091709A4400000090261A16200000092955A11100000
    1/4"-28
    		0.500"6.7 mm
    		6.7 mmMS21209F4-20, NASM21209590296A208000091709A1520000091709A4400000090261A16200000092955A11100000
    1/4"-28
    		0.625"6.7 mm
    		6.7 mmMS21209F4-25, NASM21209190296A556000091709A1520000091709A4400000090261A16200000092955A11100000
    5/16"-18
    		0.312"Q
    		0.332"MS21209C5-10, NASM212091090296A1260000091709A1060000091709A4430000090261A15600000092955A113000000
    5/16"-18
    		0.469"Q
    		0.332"MS21209C5-15, NASM212091090296A1270000091709A1060000091709A4430000090261A15600000092955A113000000
    5/16"-18
    		0.625"Q
    		0.332"MS21209C5-20, NASM21209190296A128000091709A1060000091709A4430000090261A15600000092955A113000000
    5/16"-24
    		0.312"21/64"
    		0.328"MS21209F5-10, NASM212091090296A211000091709A1530000091709A4460000090261A16300000092955A121000000
    5/16"-24
    		0.469"21/64"
    		0.328"MS21209F5-15, NASM212091090296A212000091709A1530000091709A4460000090261A16300000092955A121000000
    5/16"-24
    		0.625"21/64"
    		0.328"MS21209F5-20, NASM21209190296A213000091709A1530000091709A4460000090261A16300000092955A121000000
    5/16"-24
    		0.781"21/64"
    		0.328"MS21209F5-25, NASM21209190296A214000091709A1530000091709A4460000090261A16300000092955A121000000
    3/8"-16
    		0.375"X
    		0.397"MS21209C6-10, NASM212091090296A1310000091709A1070000091709A4490000090261A15700000092955A115000000
    3/8"-16
    		0.562"X
    		0.397"MS21209C6-15, NASM21209590296A132000091709A1070000091709A4490000090261A15700000092955A115000000
    3/8"-16
    		0.750"X
    		0.397"MS21209C6-20, NASM21209190296A133000091709A1070000091709A4490000090261A15700000092955A115000000
    3/8"-24
    		0.375"25/64"
    		0.391"MS21209F6-10, NASM21209590296A216000091709A1540000091709A4520000090261A16400000092955A123000000
    3/8"-24
    		0.562"25/64"
    		0.391"MS21209F6-15, NASM21209590296A217000091709A1540000091709A4520000090261A16400000092955A123000000
    3/8"-24
    		0.750"25/64"
    		0.391"MS21209F6-20, NASM21209190296A218000091709A1540000091709A4520000090261A16400000092955A123000000
    3/8"-24
    		0.938"25/64"
    		0.391"MS21209F6-25, NASM21209190296A219000091709A1540000091709A4520000090261A16400000092955A123000000
    7/16"-14
    		0.438"29/64"
    		0.453"MS21209C7-10, NASM21209590296A136000091709A1080000091709A4550000090261A15800000092955A202000000
    7/16"-14
    		0.656"29/64"
    		0.453"MS21209C7-15, NASM21209590296A137000091709A1080000091709A4550000090261A15800000092955A202000000
    7/16"-14
    		0.875"29/64"
    		0.453"MS21209C7-20, NASM21209190296A138000091709A1080000091709A4550000090261A15800000092955A202000000
    7/16"-20
    		0.438"29/64"
    		0.453"MS21209F7-10, NASM21209590296A221000091709A1550000091709A4580000090261A16500000092955A203000000
    7/16"-20
    		0.656"29/64"
    		0.453"MS21209F7-15, NASM21209590296A222000091709A1550000091709A4580000090261A16500000092955A203000000
    7/16"-20
    		0.875"29/64"
    		0.453"MS21209F7-20, NASM21209190296A223000091709A1550000091709A4580000090261A16500000092955A203000000
    1/2"-13
    		0.500"17/32"
    		0.531"MS21209C8-10, NASM21209590296A141000091709A1090000091709A4610000090261A15900000092955A119000000
    1/2"-13
    		0.750"17/32"
    		0.531"MS21209C8-15, NASM21209590296A142000091709A1090000091709A4610000090261A15900000092955A119000000
    1/2"-13
    		1"17/32"
    		0.531"MS21209C8-20, NASM21209190296A143000091709A1090000091709A4610000090261A15900000092955A119000000
    1/2"-13
    		1.250"17/32"
    		0.531"MS21209C8-25, NASM21209190296A144000091709A1090000091709A4610000090261A15900000092955A119000000
    1/2"-20
    		0.500"33/64"
    		0.516"MS21209F8-10, NASM21209590296A226000091709A1560000091709A4640000090261A16600000092955A127000000
    1/2"-20
    		0.750"33/64"
    		0.516"MS21209F8-15, NASM21209590296A227000091709A1560000091709A4640000090261A16600000092955A127000000
    1/2"-20
    		1"33/64"
    		0.516"MS21209F8-20, NASM21209190296A228000091709A1560000091709A4640000090261A16600000092955A127000000
    1/2"-20
    		1.250"33/64"
    		0.516"MS21209F8-25, NASM21209190296A229000091709A1560000091709A4640000090261A16600000092955A127000000
    9/16"-12
    		0.562"19/32"
    		0.594"MS21209C9-10, NASM21209190296A140000091709A1110000091709A46700000090261A17100000———0
    9/16"-12
    		0.844"19/32"
    		0.594"MS21209C9-15, NASM21209190296A147000091709A1110000091709A46700000090261A17100000———0
    9/16"-18
    		0.562"37/64"
    		0.578"MS21209F9-10, NASM21209190296A231000091709A1570000091709A47000000090261A112000000———0
    9/16"-18
    		0.844"37/64"
    		0.578"MS21209F9-15, NASM21209190296A232000091709A1570000091709A47000000090261A112000000———0
    5/8"-11
    		0.625"21/32"
    		0.656"MS21209C1010, NASM21209190296A151000091709A1120000091709A47300000090261A17200000———0
    5/8"-11
    		0.938"21/32"
    		0.656"MS21209C1015, NASM21209190296A152000091709A1120000091709A47300000090261A17200000———0
    5/8"-11
    		1.250"21/32"
    		0.656"MS21209C1020, NASM21209190296A153000091709A1120000091709A47300000090261A17200000———0
    5/8"-18
    		0.625"41/64"
    		0.641"MS21209F1010, NASM21209190296A236000091709A1580000091709A47600000090261A182000000———0
    5/8"-18
    		0.938"41/64"
    		0.641"MS21209F1015, NASM21209190296A237000091709A1580000091709A47600000090261A182000000———0
    3/4"-10
    		0.750"25/32"
    		0.781"MS21209C1210, NASM21209190296A156000091709A11300000091709A47900000090261A17300000———0
    3/4"-10
    		1.125"25/32"
    		0.781"MS21209C1215, NASM21209190296A157000091709A11300000091709A47900000090261A17300000———0
    3/4"-10
    		1.500"25/32"
    		0.781"MS21209C1220, NASM21209190296A158000091709A11300000091709A47900000090261A17300000———0
    3/4"-16
    		0.750"49/64"
    		0.766"MS21209F1210, NASM21209190296A241000091709A15900000091709A48200000090261A183000000———0
    3/4"-16
    		1.125"49/64"
    		0.766"MS21209F1215, NASM21209190296A242000091709A15900000091709A48200000090261A183000000———0
    7/8"-9
    		0.875"29/32"
    		0.906"MS21209C1410, NASM21209190296A163000091709A11400000091709A48500000090261A17400000———0
    7/8"-14
    		0.875"57/64"
    		0.891"MS21209F1410, NASM21209190296A2480000091709A16100000091709A48800000090261A114000000———0
    7/8"-14
    		1.312"57/64"
    		0.891"MS21209F1415, NASM21209190296A247000091709A16100000091709A48800000090261A114000000———0
    1"-8
    		1"1 1/32"
    		1.031"MS21209C1610, NASM21209190296A166000091709A11500000091709A49100000090261A17500000———0
    1"-8
    		1.500"1 1/32"
    		1.031"MS21209C1615, NASM21209190296A1670000091709A11500000091709A49100000090261A17500000———0
    1"-12
    		1"1 1/32"
    		1.031"MS21209F1610, NASM21209190296A0400000091709A07300000091709A49700000090261A176000000———0
    1"-14
    		1"1 1/32"
    		1.031"—190296A037000091709A07100000091709A49400000090261A177000000———0
    1"-14
    		1.500"1 1/32"
    		1.031"—190296A038000091709A07100000091709A49400000090261A177000000———0
    1 1/4"-7
    		1.875"1 19/64"
    		1.297"MS21209C2015, NASM21209190296A0500000091709A11700000091709A50600000090261A124000000———0
    M2.2 x 0.45 mm3.3 mm2.35 mm
    		2.35 mmSAE MA3329-150190296A382000091709A1900000091709A21000000090261A1860000092955A204000000
    M2.5 x 0.45 mm2.5 mm37 Ga.
    		0.104"DIN 8140, SAE MA3329-1011090296A401000091709A6780000091709A5780000090261A18700000092955A204000000
    M2.5 x 0.45 mm3.8 mm37 Ga.
    		0.104"DIN 8140, SAE MA3329-1511090296A402000091709A6780000091709A5780000090261A18700000092955A204000000
    M2.5 x 0.45 mm5 mm37 Ga.
    		0.104"SAE MA3329-2011090296A403000091709A6780000091709A5780000090261A18700000092955A204000000
    M3 x 0.5 mm3 mm3.2 mm
    		3.2 mmDIN 8140, SAE MA3329-1021090296A4050000091709A3550000091709A5240000090261A18800000092955A155000000
    M3 x 0.5 mm4.5 mm3.2 mm
    		3.2 mmDIN 8140, SAE MA3329-1521090296A4060000091709A3550000091709A5240000090261A18800000092955A155000000
    M3 x 0.5 mm6 mm3.2 mm
    		3.2 mmDIN 8140, SAE MA3329-2021090296A4040000091709A3550000091709A5240000090261A18800000092955A155000000
    M3 x 0.5 mm7.5 mm3.2 mm
    		3.2 mmDIN 8140, SAE MA3329-252190296A408000091709A3550000091709A5240000090261A18800000092955A155000000
    M3.5 x 0.6 mm5.3 mm3.7 mm
    		3.7 mmDIN 8140, SAE MA3329-153190296A372000091709A1950000091709A22000000090261A18900000092955A155000000
    M4 x 0.7 mm4 mm19 Ga.
    		0.166"DIN 8140, SAE MA3329-1041090296A407000091709A3590000091709A5270000090261A19000000092955A160000000
    M4 x 0.7 mm6 mm19 Ga.
    		0.166"DIN 8140, SAE MA3329-1541090296A4090000091709A3590000091709A5270000090261A19000000092955A160000000
    M4 x 0.7 mm8 mm19 Ga.
    		0.166"DIN 8140, SAE MA3329-2041090296A4100000091709A3590000091709A5270000090261A19000000092955A160000000
    M4 x 0.7 mm10 mm19 Ga.
    		0.166"SAE MA3329-254190296A418000091709A3590000091709A5270000090261A19000000092955A160000000
    M5 x 0.8 mm5 mm5.3 mm
    		5.3 mmDIN 8140, SAE MA3329-1051090296A301000091709A2010000091709A5300000090261A19100000092955A12900000
    M5 x 0.8 mm7.5 mm5.3 mm
    		5.3 mmDIN 8140, SAE MA3329-1551090296A302000091709A2010000091709A5300000090261A19100000092955A12900000
    M5 x 0.8 mm10 mm5.3 mm
    		5.3 mmDIN 8140, SAE MA3329-2051090296A3030000091709A2010000091709A5300000090261A19100000092955A12900000
    M5 x 0.8 mm12.5 mm5.3 mm
    		5.3 mmDIN 8140, SAE MA3329-255190296A305000091709A2010000091709A5300000090261A19100000092955A12900000
    M6 x 1 mm6 mm6.3 mm
    		6.3 mmDIN 8140, SAE MA3329-1061090296A3060000091709A2020000091709A5330000090261A19200000092955A13100000
    M6 x 1 mm9 mm6.3 mm
    		6.3 mmDIN 8140, SAE MA3329-1561090296A3070000091709A2020000091709A5330000090261A19200000092955A13100000
    M6 x 1 mm12 mm6.3 mm
    		6.3 mmDIN 8140, SAE MA3329-2061090296A3080000091709A2020000091709A5330000090261A19200000092955A13100000
    M6 x 1 mm15 mm6.3 mm
    		6.3 mmSAE MA3329-256190296A310000091709A2020000091709A5330000090261A19200000092955A13100000
    M7 x 1 mm7 mm7.3 mm
    		7.3 mmSAE MA3329-1071090296A311000091709A2030000091709A5360000090261A19300000092955A205000000
    M7 x 1 mm10.5 mm7.3 mm
    		7.3 mmSAE MA3329-1571090296A312000091709A2030000091709A5360000090261A19300000092955A205000000
    M7 x 1 mm14 mm7.3 mm
    		7.3 mmDIN 8140, SAE MA3329-207590296A313000091709A2030000091709A5360000090261A19300000092955A205000000
    M8 x 1 mm8 mm8.3 mm
    		8.3 mmDIN 8140, SAE MA3329-108590296A314000091709A6500000091709A5390000090261A30000000092955A133000000
    M8 x 1 mm12 mm8.3 mm
    		8.3 mmDIN 8140, SAE MA3329-158590296A315000091709A6500000091709A5390000090261A30000000092955A133000000
    M8 x 1 mm16 mm8.3 mm
    		8.3 mmSAE MA3329-208590296A318000091709A6500000091709A5390000090261A30000000092955A133000000
    M8 x 1.25 mm8 mm8.4 mm
    		8.4 mmDIN 8140, SAE MA3329-1091090296A316000091709A2040000091709A5420000090261A19400000092955A133000000
    M8 x 1.25 mm12 mm8.4 mm
    		8.4 mmDIN 8140, SAE MA3329-1591090296A3170000091709A2040000091709A5420000090261A19400000092955A133000000
    M8 x 1.25 mm16 mm8.4 mm
    		8.4 mmDIN 8140, SAE MA3329-209590296A319000091709A2040000091709A5420000090261A19400000092955A133000000
    M8 x 1.25 mm20 mm8.4 mm
    		8.4 mmSAE MA3329-259190296A320000091709A2040000091709A5420000090261A19400000092955A133000000
    M10 x 1 mm10 mm13/32"
    		0.406"—590296A323000091709A6720000091709A5750000090261A30300000092955A135000000
    M10 x 1 mm15 mm13/32"
    		0.406"DIN 8140, SAE MA3329-191590296A3240000091709A6720000091709A5750000090261A30300000092955A135000000
    M10 x 1 mm20 mm13/32"
    		0.406"—590296A325000091709A6720000091709A5750000090261A30300000092955A135000000
    M10 x 1.25 mm10 mm13/32"
    		0.406"SAE MA3329-110590296A341000091709A6530000091709A54500000090261A19700000092955A135000000
    M10 x 1.25 mm15 mm13/32"
    		0.406"DIN 8140, SAE MA3329-160590296A343000091709A6530000091709A54500000090261A19700000092955A135000000
    M10 x 1.25 mm20 mm13/32"
    		0.406"SAE MA3329-210590296A344000091709A6530000091709A54500000090261A19700000092955A135000000
    M10 x 1.5 mm10 mm10.5 mm
    		10.5 mmDIN 8140, SAE MA3329-1111090296A321000091709A2050000091709A5480000090261A19500000092955A135000000
    M10 x 1.5 mm15 mm10.5 mm
    		10.5 mmDIN 8140, SAE MA3329-161590296A322000091709A2050000091709A5480000090261A19500000092955A135000000
    M10 x 1.5 mm20 mm10.5 mm
    		10.5 mmSAE MA3329-211590296A345000091709A2050000091709A5480000090261A19500000092955A135000000
    M10 x 1.5 mm25 mm10.5 mm
    		10.5 mmDIN 8140, SAE MA3329-261190296A328000091709A2050000091709A5480000090261A19500000092955A135000000
    M12 x 1.25 mm12 mm31/64"
    		0.484"SAE MA3329-112590296A352000091709A6750000091709A55100000090261A30600000092955A137000000
    M12 x 1.25 mm18 mm31/64"
    		0.484"DIN 8140, SAE MA3329-163190296A355000091709A6750000091709A55100000090261A30600000092955A137000000
    M12 x 1.25 mm24 mm31/64"
    		0.484"SAE MA3329-212190296A358000091709A6750000091709A55100000090261A30600000092955A137000000
    M12 x 1.5 mm18 mm12.5 mm
    		12.5 mmDIN 8140, SAE MA3329-162190296A361000091709A6560000091709A5540000090261A18400000092955A137000000
    M12 x 1.75 mm12 mm12.5 mm
    		12.5 mmDIN 8140, SAE MA3329-114590296A326000091709A2060000091709A5570000090261A19600000092955A137000000
    M12 x 1.75 mm18 mm12.5 mm
    		12.5 mmDIN 8140, SAE MA3329-164590296A327000091709A2060000091709A5570000090261A19600000092955A137000000
    M12 x 1.75 mm24 mm12.5 mm
    		12.5 mmDIN 8140, SAE MA3329-214190296A364000091709A2060000091709A5570000090261A19600000092955A137000000
    M12 x 1.75 mm30 mm12.5 mm
    		12.5 mmDIN 8140, SAE MA3329-264190296A366000091709A2060000091709A5570000090261A19600000092955A137000000
    M14 x 1.5 mm21 mm37/64"
    		0.578"DIN 8140, SAE MA3329-165190296A414000091709A6590000091709A56000000090261A199000000———0
    M14 x 2 mm14 mm14.5 mm
    		14.5 mmSAE MA3329-116190296A412000091709A36800000091709A56300000090261A198000000———0
    M14 x 2 mm21 mm14.5 mm
    		14.5 mmDIN 8140, SAE MA3329-166190296A416000091709A36800000091709A56300000090261A198000000———0
    M16 x 2 mm16 mm16.5 mm
    		16.5 mmDIN 8140, SAE MA3329-118190296A4150000091709A3710000091709A56600000090261A208000000———0
    M16 x 2 mm24 mm16.5 mm
    		16.5 mmDIN 8140, SAE MA3329-168190296A417000091709A3710000091709A56600000090261A208000000———0
    M18 x 2.5 mm18 mm47/64"
    		0.734"SAE MA3329-121190296A419000091709A37300000091709A56900000090261A312000000———0
    M18 x 2.5 mm27 mm47/64"
    		0.734"SAE MA3329-171190296A422000091709A37300000091709A56900000090261A312000000———0
    M20 x 2.5 mm20 mm13/16"
    		0.813"SAE MA3329-124190296A427000091709A37500000091709A57200000090261A212000000———0
    M20 x 2.5 mm30 mm13/16"
    		0.813"SAE MA3329-174190296A425000091709A37500000091709A57200000090261A212000000———0
    M24 x 3 mm36 mm31/32"
    		0.969"DIN 8140, SAE MA3329-179190296A4310000092450A32500000091709A34000000092450A18900000———0
    M30 x 3.5 mm45 mm1 7/32"
    		1.219"DIN 8140190296A4360000092450A34500000091709A35000000092450A19200000———0
     
    Prongless
    Image of Product. Prongless. Bottom orientation. Threaded Inserts. Screw-Locking Helical Threaded Inserts, Prongless.

    Prongless

     
    18-8 Stainless Steel
    2-56
    		0.086"41 Ga.
    		0.096"NAS1130-02L-10591630A421000091709A0980000091709A4010000091049A601000000———0
    2-56
    		0.129"41 Ga.
    		0.096"NAS1130-02L-15591630A424000091709A0980000091709A4010000091049A601000000———0
    2-56
    		0.172"41 Ga.
    		0.096"NAS1130-02L-20591630A427000091709A0980000091709A4010000091049A601000000———0
    4-40
    		0.112"31 Ga.
    		0.120"NAS1130-04L-10591630A430000091709A1010000091709A4070000091049A604000000———0
    4-40
    		0.168"31 Ga.
    		0.120"NAS1130-04L-15591630A433000091709A1010000091709A4070000091049A604000000———0
    4-40
    		0.224"31 Ga.
    		0.120"NAS1130-04L-20591630A436000091709A1010000091709A4070000091049A604000000———0
    6-32
    		0.138"25 Ga.
    		0.150"NAS1130-06L-10591630A439000091709A1020000091709A4160000091049A607000000———0
    6-32
    		0.207"25 Ga.
    		0.150"NAS1130-06L-15591630A442000091709A1020000091709A4160000091049A607000000———0
    6-32
    		0.276"25 Ga.
    		0.150"NAS1130-06L-20591630A445000091709A1020000091709A4160000091049A607000000———0
    8-32
    		0.164"16 Ga.
    		0.177"NAS1130-08L-10591630A448000091709A1030000091709A4220000091049A610000000———0
    8-32
    		0.246"16 Ga.
    		0.177"NAS1130-08L-15591630A451000091709A1030000091709A4220000091049A610000000———0
    8-32
    		0.328"16 Ga.
    		0.177"NAS1130-08L-20591630A454000091709A1030000091709A4220000091049A610000000———0
    10-24
    		0.190"5 Ga.
    		0.206"NAS1130-3CL-10591630A457000091709A1040000091709A4280000091049A613000000———0
    10-24
    		0.380"5 Ga.
    		0.206"NAS1130-3CL-20591630A463000091709A1040000091709A4280000091049A613000000———0
    10-32
    		0.190"13/64"
    		0.203"NAS1130-3L-10591630A466000091709A1510000091709A4310000091049A812000000———0
    10-32
    		0.285"13/64"
    		0.203"NAS1130-3L-15591630A469000091709A1510000091709A4310000091049A812000000———0
    10-32
    		0.380"13/64"
    		0.203"NAS1130-3L-20591630A472000091709A1510000091709A4310000091049A812000000———0
    1/4"-20
    		0.250"H
    		0.266"NAS1130-4L-10591630A475000091709A1050000091709A4370000091049A619000000———0
    1/4"-20
    		0.375"H
    		0.266"NAS1130-4L-15591630A478000091709A1050000091709A4370000091049A619000000———0
    M2.5 x 0.45 mm2.5 mm37 Ga.
    		0.104"NA0276M2A-L101091630A221000091709A6780000091709A5780000091049A620000000———0
    M3 x 0.5 mm3 mm3.2 mm
    		3.2 mmNA0276M3-L101091630A230000091709A3550000091709A5240000091049A622000000———0
    M3 x 0.5 mm4.5 mm3.2 mm
    		3.2 mmNA0276M3-L151091630A235000091709A3550000091709A5240000091049A622000000———0
    M3 x 0.5 mm6 mm3.2 mm
    		3.2 mmDIN 8140, NA0276M3-L201091630A283000091709A3550000091709A5240000091049A622000000———0
    M4 x 0.7 mm4 mm19 Ga.
    		0.166"NA0276M4-L101091630A256000091709A3590000091709A5270000091049A624000000———0
    M4 x 0.7 mm6 mm19 Ga.
    		0.166"NA0276M4-L151091630A237000091709A3590000091709A5270000091049A624000000———0
    M4 x 0.7 mm8 mm19 Ga.
    		0.166"NA0276M4-L201091630A239000091709A3590000091709A5270000091049A624000000———0
    M5 x 0.8 mm5 mm5.3 mm
    		5.3 mmNA0276M5-L101091630A242000091709A2010000091709A5300000091049A626000000———0
    M5 x 0.8 mm10 mm5.3 mm
    		5.3 mmNA0276M5-L201091630A248000091709A2010000091709A5300000091049A626000000———0
    M6 x 1 mm6 mm6.3 mm
    		6.3 mmNA0276M6-L101091630A251000091709A2020000091709A5330000091049A628000000———0
    M6 x 1 mm9 mm6.3 mm
    		6.3 mmNA0276M6-L151091630A254000091709A2020000091709A5330000091049A628000000———0
    M6 x 1 mm12 mm6.3 mm
    		6.3 mmNA0276M6-L201091630A2570000091709A2020000091709A5330000091049A628000000———0
     

    Tapping Threaded Inserts for Hardwood

    Image of Product. Bottom orientation. Threaded Inserts. Tapping Threaded Inserts for Hardwood.
    The sharp threads on these inserts cut into hardwood for a secure hold. They install in one step, so they’re ideal for quickly creating a lot of threaded connections in wooden fixtures and panels. All you need is a drill and an installation bit. Also known as knife-thread inserts.
    Zinc-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.
    Brass—Conductive and nonmagnetic, these inserts are useful for electrical applications. They resist moisture but aren't as strong as steel inserts.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Inserts
    Installation
    Tools
    Drive
    Thread Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Style
    Size,
    mm
    Pkg.
    Qty.
    Pkg.
    Each
     
    Zinc-Plated Steel
    8-32
    		0.394"17/64"
    		0.250"Hex
    		42590192A15700000096924A110000000
    10-24
    		0.472"5/16"
    		0.297"Hex
    		52590192A1160000096924A22000000
    1/4"-20
    		0.394"3/8"
    		0.375"Hex
    		62590192A1580000096924A33000000
    1/4"-20
    		0.472"3/8"
    		0.375"Hex
    		61090192A1520000096924A33000000
    1/4"-20
    		0.591"3/8"
    		0.375"Hex
    		61090192A1530000096924A33000000
    1/4"-20
    		0.709"3/8"
    		0.375"Hex
    		61090192A1590000096924A33000000
    1/4"-20
    		0.787"3/8"
    		0.375"Hex
    		61090192A1540000096924A33000000
    1/4"-20
    		1.181"3/8"
    		0.375"Hex
    		61090192A1330000096924A33000000
    5/16"-18
    		0.591"15/32"
    		0.453"Hex
    		81090192A1610000096924A45000000
    5/16"-18
    		0.709"15/32"
    		0.453"Hex
    		81090192A1270000096924A45000000
    5/16"-18
    		1.181"15/32"
    		0.469"Hex
    		81090192A1340000096924A45000000
    3/8"-16
    		0.591"5/8"
    		0.625"Hex
    		101090192A1350000096924A56000000
    3/8"-16
    		0.787"5/8"
    		0.625"Hex
    		101090192A1360000096924A56000000
    3/8"-16
    		1.181"5/8"
    		0.609"Hex
    		101090192A1560000096924A56000000
     
    Brass
    4-40
    		0.375"17/64"
    		0.266"Slotted
    		—2590016A0050000094110A22000000
    6-32
    		0.375"17/64"
    		0.266"Slotted
    		—2590016A0070000094110A11000000
    8-32
    		0.375"17/64"
    		0.266"Slotted
    		—2590016A0090000094110A12000000
    10-24
    		0.500"25/64"
    		0.391"Slotted
    		—2590016A0110000094110A13000000
    10-32
    		0.500"25/64"
    		0.391"Slotted
    		—2590016A0210000094110A13000000
    1/4"-20
    		0.500"25/64"
    		0.391"Slotted
    		—2590016A0290000094110A14000000
    1/4"-20
    		0.750"25/64"
    		0.391"Slotted
    		—1090016A1010000094110A14000000
    1/4"-28
    		0.500"25/64"
    		0.391"Slotted
    		—2590016A0320000094110A14000000
    5/16"-18
    		0.625"33/64"
    		0.516"Slotted
    		—1090016A030000094110A15000000
    5/16"-18
    		1"33/64"
    		0.516"Slotted
    		—590016A102000094110A15000000
    5/16"-24
    		0.625"33/64"
    		0.516"Slotted
    		—1090016A033000094110A15000000
    3/8"-16
    		0.625"33/64"
    		0.516"Slotted
    		—1090016A0310000094110A16000000
    3/8"-16
    		1"33/64"
    		0.516"Slotted
    		—590016A103000094110A16000000
    3/8"-24
    		0.625"33/64"
    		0.516"Slotted
    		—1090016A0340000094110A16000000
    M3 x 0.5 mm9.53 mm17/64"
    		0.266"Slotted
    		—1095631A050000094110A11000000
    M4 x 0.7 mm9.53 mm17/64"
    		0.266"Slotted
    		—1095631A075000094110A12000000
    M5 x 0.8 mm12.7 mm25/64"
    		0.391"Slotted
    		—1095631A100000094110A13000000
    M6 x 1 mm12.7 mm25/64"
    		0.391"Slotted
    		—1095631A125000094110A14000000
    M8 x 1.25 mm15.88 mm33/64"
    		0.516"Slotted
    		—1095631A1500000094110A15000000
    M10 x 1.5 mm15.88 mm33/64"
    		0.516"Slotted
    		—1090016A1040000094110A16000000
     
    18-8 Stainless Steel
    4-40
    		0.375"17/64"
    		0.266"Slotted
    		—195807A410000094110A22000000
    6-32
    		0.375"17/64"
    		0.266"Slotted
    		—195807A420000094110A11000000
    8-32
    		0.375"17/64"
    		0.266"Slotted
    		—195807A100000094110A12000000
    10-24
    		0.500"25/64"
    		0.391"Slotted
    		—195807A200000094110A13000000
    10-32
    		0.500"25/64"
    		0.391"Slotted
    		—195807A430000094110A13000000
    1/4"-20
    		0.500"25/64"
    		0.391"Slotted
    		—195807A300000094110A14000000
    1/4"-28
    		0.500"25/64"
    		0.391"Slotted
    		—195807A440000094110A14000000
    5/16"-18
    		0.625"33/64"
    		0.516"Slotted
    		—195807A450000094110A15000000
    5/16"-24
    		0.625"33/64"
    		0.516"Slotted
    		—195807A460000094110A15000000
    3/8"-16
    		0.625"33/64"
    		0.516"Slotted
    		—195807A470000094110A16000000
    3/8"-24
    		0.625"33/64"
    		0.516"Slotted
    		—195807A480000094110A16000000
    M3 x 0.5 mm9.52 mm17/64"
    		0.266"Slotted
    		—195807A490000094110A11000000
    M4 x 0.7 mm9.52 mm17/64"
    		0.266"Slotted
    		—195807A500000094110A12000000
    M5 x 0.8 mm12.7 mm25/64"
    		0.391"Slotted
    		—195807A510000094110A13000000
    M6 x 1 mm12.7 mm25/64"
    		0.391"Slotted
    		—195807A520000094110A14000000
    M8 x 1.25 mm15.9 mm33/64"
    		0.516"Slotted
    		—195807A530000094110A15000000
    M10 x 1.5 mm15.9 mm33/64"
    		0.516"Slotted
    		—195807A110000094110A16000000
     

    Tapping Threaded Inserts for Plastic

    Image of Product. Bottom orientation. Threaded Inserts. Tapping Threaded Inserts for Plastic.
    Add strong, reusable metal threads to plastic. These inserts have external threads that bite into your material to resist pull-out better than press-in inserts. They're a more durable solution than threads cut directly into plastic. Inserts also have flutes that guide loose chips up and out of the way to keep threads clean. To install inserts with a wrench, thread an insert and two hex nuts onto a bolt. Then, grip and turn the top nut to drive into a drilled hole. You can save time by using an installation tool with a ratchet wrench or drill press. Also known as Trisert inserts.
    Brass—Conductive and nonmagnetic, these inserts are useful for electrical applications. They resist moisture but aren't as strong as steel inserts.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals. Since they’re lead-free, they can be safely recycled.
    Inserts
    Installation
    Tools
    Thread Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Pkg.
    Qty.
    Pkg.
    Each
     
    Brass
    2-56
    		0.141"1/8"
    		0.125"1099362A8000000090240A0210000000
    2-56
    		0.188"30 Ga.
    		0.129"1099362A100000090240A021000000
    4-40
    		0.172"5/32"
    		0.156"1099362A8010000090240A022000000
    4-40
    		0.234"24 Ga.
    		0.152"1099362A2000000090240A022000000
    6-32
    		0.218"3/16"
    		0.188"1099362A802000090240A023000000
    6-32
    		0.281"9 Ga.
    		0.196"1099362A3000000090240A023000000
    8-32
    		0.250"1 Ga.
    		0.228"1099362A803000090240A025000000
    8-32
    		0.344"1 Ga.
    		0.228"1099362A400000090240A025000000
    10-24
    		0.296"17/64"
    		0.266"1099362A8040000090240A027000000
    10-24
    		0.375"H
    		0.266"1099362A5000000090240A027000000
    10-32
    		0.296"17/64"
    		0.266"1099362A805000090240A028000000
    10-32
    		0.375"H
    		0.266"1099362A6000000090240A028000000
    1/4"-20
    		0.375"11/32"
    		0.344"1099362A8060000090240A029000000
    1/4"-20
    		0.438"5/16"
    		0.313"1099362A1010000090240A029000000
    1/4"-20
    		0.484"R
    		0.339"1099362A7000000090240A029000000
    M2 x 0.4 mm3.58 mm1/8"
    		0.125"1093722A201000090240A335000000
    M2 x 0.4 mm4.78 mm1/8"
    		0.125"1093722A202000090240A335000000
    M3 x 0.5 mm4.37 mm5/32"
    		0.156"1093722A203000090240A300000000
    M3 x 0.5 mm5.25 mm4.1 mm
    		4.1 mm593722A211000090240A300000000
    M3 x 0.5 mm5.94 mm5/32"
    		0.156"1093722A2040000090240A300000000
    M3 x 0.5 mm6.35 mm4.2 mm
    		4.2 mm1093722A101000090240A300000000
    M3.5 x 0.6 mm7.14 mm5 mm
    		5 mm1093722A102000090240A305000000
    M4 x 0.7 mm6.35 mm7/32"
    		0.219"1093722A2050000090240A310000000
    M4 x 0.7 mm8.33 mm7/32"
    		0.219"1093722A2060000090240A310000000
    M5 x 0.8 mm6.4 mm6.9 mm
    		6.9 mm593722A212000090240A315000000
    M5 x 0.8 mm7.52 mm17/64"
    		0.266"1093722A2070000090240A315000000
    M5 x 0.8 mm8.4 mm6.9 mm
    		6.9 mm593722A213000090240A315000000
    M5 x 0.8 mm9.53 mm17/64"
    		0.266"1093722A2080000090240A315000000
    M6 x 1 mm7.9 mm8 mm
    		8 mm193722A214000090240A320000000
    M6 x 1 mm9.53 mm11/32"
    		0.344"1093722A2090000090240A320000000
    M6 x 1 mm11.13 mm7.9 mm
    		7.9 mm1093722A1030000090240A320000000
    M6 x 1 mm12.29 mm11/32"
    		0.344"1093722A2100000090240A320000000
    M8 x 1.25 mm9.5 mm10.1 mm
    		10.1 mm193722A215000090240A325000000
    M8 x 1.25 mm12.4 mm10.1 mm
    		10.1 mm193722A216000090240A325000000
    M10 x 1.5 mm12 mm13 mm
    		13 mm193722A217000090240A330000000
    M10 x 1.5 mm16 mm13 mm
    		13 mm193722A218000090240A330000000
     
    18-8 Stainless Steel
    2-56
    		0.141"30 Ga.
    		0.129"593399A1010000090240A021000000
    4-40
    		0.234"24 Ga.
    		0.152"1093399A1020000090240A022000000
    6-32
    		0.218"9 Ga.
    		0.196"593399A1030000090240A023000000
    6-32
    		0.281"9 Ga.
    		0.196"593399A1040000090240A023000000
    8-32
    		0.250"1 Ga.
    		0.228"1093399A1050000090240A025000000
    8-32
    		0.344"1 Ga.
    		0.228"1093399A1060000090240A025000000
    10-32
    		0.296"H
    		0.266"593399A1070000090240A028000000
    1/4"-20
    		0.484"R
    		0.339"593399A1080000090240A029000000
    M2 x 0.4 mm4.78 mm30 Ga.
    		0.129"593399A1090000090240A335000000
    M3 x 0.5 mm4.37 mm24 Ga.
    		0.152"593399A1110000090240A300000000
    M4 x 0.7 mm8.33 mm1 Ga.
    		0.228"593399A1120000090240A310000000
    M6 x 1 mm9.53 mmR
    		0.339"593399A1130000090240A320000000
     

    Screw-Locking Seize-Resistant Key-Locking Threaded Inserts for Soft Metal

    Image of Product. Bottom orientation. Threaded Inserts. Screw-Locking Seize-Resistant Key-Locking Threaded Inserts for Soft Metal.
    Create the tightest hold in aluminum and other soft metal without screws sticking. The lubricant on these inserts eases installation, and the irregularly shaped threads won’t let screws back out from vibration. Inserts have keys that drive into material to prevent them from slipping or rotating in the hole.
    To install, drill and tap a hole in your material. Then, thread the insert onto the installation tool and screw it into the hole. Place the tool over the keys and hit it with a hammer to drive them in.
    Standard Wall—Stronger than thin-wall inserts, these are your go-to choice for threading most holes.
    Thin Wall—Use these inserts near the edge of workpieces or wherever you only have space for a small hole. They're also lighter than standard and extra-thick wall inserts for applications with strict weight limitations.
    Dry-Film-Lubricated Cadmium-Plated Steel—The plating creates a barrier against rust.
    Dry-Film-Lubricated 18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Inserts
    Installation
    Tools
    Thread Size
    For Tap Thread
    Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    No. of Locking
    Keys
    Specs. Met
    Each
    Each
    Standard Wall
     
    Dry-Film-Lubricated Cadmium-Plated Steel
    10-24
    		3/8"-16
    		0.313"Q
    		0.332"2MS51831A101L97255A24600000093904A515000000
    10-32
    		3/8"-16
    		0.313"Q
    		0.332"2MS51831A201L, NAS1395-3L97255A24700000———0
    1/4"-20
    		7/16"-14
    		0.375"X
    		0.397"2MS51831A102L97255A2480000093904A52500000
    5/16"-18
    		1/2"-13
    		0.438"29/64"
    		0.453"4MS51831A103L97255A2490000093904A53500000
    5/16"-24
    		1/2"-13
    		0.438"29/64"
    		0.453"4MS51831A203L97255A25100000———0
    3/8"-16
    		9/16"-12
    		0.500"33/64"
    		0.516"4MS51831A104L97255A2520000093904A54500000
    3/8"-24
    		9/16"-12
    		0.500"33/64"
    		0.516"4MS51831A204L97255A25300000———0
    7/16"-14
    		5/8"-11
    		0.625"37/64"
    		0.578"4MS51831A105L97255A2540000093904A73900000
    7/16"-20
    		5/8"-11
    		0.625"37/64"
    		0.578"4MS51831A205L97255A25500000———0
    1/2"-13
    		11/16"-11
    		0.688"41/64"
    		0.641"4MS51831A106L97255A2560000093904A55500000
    1/2"-20
    		11/16"-11
    		0.688"41/64"
    		0.641"4MS51831A206L97255A25700000———0
    3/4"-10
    		1 1/8"-12
    		1.250"1 1/16"
    		1.063"4MS51831A109L97255A2630000093904A748000000
    M16 x 1.5 mmM22 x 1.5 mm22 mm20.5 mm
    		20.5 mm4NA0150E16097255A3330000093904A79400000
    M16 x 2 mmM22 x 1.5 mm22 mm20.5 mm
    		20.5 mm4—97255A3320000093904A79400000
    M24 x 3 mmM33 x 2 mm33 mm31 mm
    		31 mm4—97255A33800000093904A79800000
     
    Dry-Film-Lubricated 18-8 Stainless Steel
    8-32
    		5/16"-18
    		0.313"I
    		0.272"2NAS1395C08L97255A129000093904A50500000
    10-24
    		3/8"-16
    		0.313"Q
    		0.332"2MS51831-101L97255A131000093904A51500000
    10-32
    		3/8"-16
    		0.313"Q
    		0.332"2NAS1395C3L97255A1320000———0
    1/4"-20
    		7/16"-14
    		0.375"X
    		0.397"2MS51831-102L97255A133000093904A52500000
    1/4"-28
    		7/16"-14
    		0.375"X
    		0.397"2NAS1395C4L97255A1340000———0
    5/16"-18
    		1/2"-13
    		0.438"29/64"
    		0.453"4MS51831-103L97255A135000093904A53500000
    5/16"-24
    		1/2"-13
    		0.438"29/64"
    		0.453"4NAS1395C5L97255A1360000———0
    3/8"-16
    		9/16"-12
    		0.500"33/64"
    		0.516"4MS51831-104L97255A137000093904A54500000
    3/8"-24
    		9/16"-12
    		0.500"33/64"
    		0.516"4NAS1395C6L97255A1380000———0
    7/16"-14
    		5/8"-11
    		0.625"37/64"
    		0.578"4MS51831-105L97255A1390000093904A73900000
    1/2"-13
    		11/16"-11
    		0.688"41/64"
    		0.641"4MS51831-106L97255A1420000093904A55500000
    1/2"-20
    		11/16"-11
    		0.688"41/64"
    		0.641"4NAS1395C8L97255A14300000———0
    5/8"-11
    		7/8"-14
    		0.875"53/64"
    		0.828"4MS51831-108L97255A1460000093904A74600000
    3/4"-10
    		1 1/8"-12
    		1.250"1 1/16"
    		1.063"4MS51831-109L97255A1480000093904A748000000
    7/8"-9
    		1 1/4"-12
    		1.375"1 3/16"
    		1.188"4MS51831-110L97255A1510000093904A751000000
    7/8"-14
    		1 1/4"-12
    		1.375"1 3/16"
    		1.188"4MS51831-210L97255A15200000———0
    1"-8
    		1 3/8"-12
    		1.500"1 5/16"
    		1.313"4MS51831-111L97255A1530000093904A753000000
    M4 x 0.7 mmM8 x 1.25 mm8 mm6.9 mm
    		6.9 mm2—97255A2210000093904A78600000
    M5 x 0.8 mmM10 x 1.25 mm10 mm8.8 mm
    		8.8 mm2—97255A2220000093904A78700000
    M6 x 1 mmM12 x 1.25 mm12 mm10.8 mm
    		10.8 mm2—97255A2230000093904A78800000
    M8 x 1 mmM14 x 1.5 mm14 mm12.8 mm
    		12.8 mm4—97255A2240000093904A78900000
    M8 x 1.25 mmM14 x 1.5 mm14 mm12.8 mm
    		12.8 mm4—97255A2250000093904A78900000
    M10 x 1.25 mmM16 x 1.5 mm16 mm14.75 mm
    		14.75 mm4—97255A1790000093904A79100000
    M10 x 1.5 mmM16 x 1.5 mm16 mm14.75 mm
    		14.75 mm4—97255A1960000093904A79100000
    M12 x 1.75 mmM18 x 1.5 mm18 mm16.75 mm
    		16.75 mm4—97255A1980000093904A79200000
    M16 x 2 mmM22 x 1.5 mm22 mm20.5 mm
    		20.5 mm4—97255A2130000093904A79400000
     
    Thin Wall
     
    Dry-Film-Lubricated Cadmium-Plated Steel
    2-56
    		8-32
    		0.125"29 Ga.
    		0.134"2MS51830A101L97255A2260000093904A15000000
    4-40
    		10-32
    		0.172"20 Ga.
    		0.161"2MS51830A102L97255A2270000093904A25000000
    6-32
    		12-28
    		0.172"3/16"
    		0.187"2MS51830A103L97255A2280000093904A35000000
    8-32
    		1/4"-28
    		0.219"1 Ga.
    		0.228"2MS51830A104L97255A2290000093904A45000000
    10-32
    		5/16"-18
    		0.313"I
    		0.272"2MS51830A201L, NAS1394-3L97255A2320000———0
    1/4"-20
    		3/8"-16
    		0.375"Q
    		0.332"2MS51830A106L97255A233000093904A61500000
    1/4"-28
    		3/8"-16
    		0.375"Q
    		0.332"2MS51830A202L, NAS1394-4L97255A2340000———0
    1/4"-28
    		7/16"-14
    		0.375"X
    		0.397"2MS51831A202L, NAS1395-4L97255A23500000———0
    3/8"-16
    		1/2"-13
    		0.500"29/64"
    		0.453"4MS51830A108L97255A238000093904A63500000
    3/8"-24
    		1/2"-13
    		0.500"29/64"
    		0.453"4MS51830A204L, NAS1394-6L97255A2390000———0
    1/2"-13
    		5/8"-11
    		0.625"37/64"
    		0.578"4MS51830A110L97255A2430000093904A64500000
    1/2"-20
    		5/8"-11
    		0.625"37/64"
    		0.578"4MS51830A206L, NAS1394-8L97255A24400000———0
    M2 x 0.4 mmM4 x 0.7 mm3 mm3.4 mm
    		3.4 mm2—97255A2940000094010A41500000
    M3 x 0.5 mmM5 x 0.8 mm4.25 mm4.4 mm
    		4.4 mm2NA0146E03097255A2960000094010A43500000
    M4 x 0.7 mmM6 x 0.75 mm5.25 mm5.5 mm
    		5.5 mm2NA0146E04097255A2970000094010A44500000
    M5 x 0.5 mmM8 x 1.25 mm8 mm6.9 mm
    		6.9 mm2—97255A2990000093904A77900000
    M5 x 0.8 mmM8 x 1.25 mm8 mm6.9 mm
    		6.9 mm2NA0146E05097255A2980000093904A77900000
    M6 x 1 mmM10 x 1.25 mm10 mm8.8 mm
    		8.8 mm2NA0146E06097255A3110000093904A78100000
    M8 x 1.25 mmM12 x 1.25 mm12 mm10.8 mm
    		10.8 mm4—97255A3130000093904A78200000
    M10 x 1.5 mmM14 x 1.5 mm14 mm12.8 mm
    		12.8 mm4—97255A3150000093904A78300000
     
    Dry-Film-Lubricated 18-8 Stainless Steel
    2-56
    		6-40
    		0.109"31 Ga.
    		0.118"2—97255A1120000093904A71100000
    2-56
    		8-32
    		0.125"29 Ga.
    		0.134"2MS51830-101L97255A111000093904A15000000
    4-40
    		10-32
    		0.172"20 Ga.
    		0.161"2MS51830-102L97255A113000093904A25000000
    6-32
    		12-28
    		0.172"3/16"
    		0.187"2MS51830-103L97255A114000093904A35000000
    8-32
    		1/4"-28
    		0.219"1 Ga.
    		0.228"2MS51830-104L97255A115000093904A45000000
    10-24
    		5/16"-18
    		0.313"I
    		0.272"2MS51830-105L97255A116000093904A60500000
    10-32
    		5/16"-18
    		0.313"I
    		0.272"2MS51830-201L, NAS1394C3L97255A1170000———0
    1/4"-20
    		3/8"-16
    		0.375"Q
    		0.332"2MS51830-106L97255A118000093904A61500000
    1/4"-28
    		3/8"-16
    		0.375"Q
    		0.332"2MS51830-202L, NAS1394C4L97255A1190000———0
    5/16"-18
    		7/16"-14
    		0.438"X
    		0.397"4MS51830-107L97255A121000093904A62500000
    5/16"-24
    		7/16"-14
    		0.438"X
    		0.397"4MS51830-203L, NAS1394C5L97255A1220000———0
    3/8"-16
    		1/2"-13
    		0.500"29/64"
    		0.453"4MS51830-108L97255A123000093904A63500000
    3/8"-24
    		1/2"-13
    		0.500"29/64"
    		0.453"4MS51830-204L, NAS1394C6L97255A1240000———0
    7/16"-14
    		9/16"-12
    		0.563"33/64"
    		0.516"4MS51830-109L97255A1250000093904A72500000
    7/16"-20
    		9/16"-12
    		0.563"33/64"
    		0.516"4MS51830-205L, NAS1394C7L97255A12600000———0
    1/2"-13
    		5/8"-11
    		0.625"37/64"
    		0.578"4MS51830-110L97255A1270000093904A64500000
    1/2"-20
    		5/8"-11
    		0.625"37/64"
    		0.578"4MS51830-206L, NAS1394C8L97255A12800000———0
    M2 x 0.4 mmM4 x 0.7 mm3 mm3.4 mm
    		3.4 mm2—97255A1810000094010A41500000
    M2.5 x 0.45 mmM4.5 x 0.75 mm3.81 mm3.9 mm
    		3.9 mm2—97255A1820000094010A42500000
    M3 x 0.5 mmM5 x 0.8 mm4.25 mm4.4 mm
    		4.4 mm2—97255A1830000094010A43500000
    M4 x 0.7 mmM6 x 0.75 mm5.25 mm5.5 mm
    		5.5 mm2—97255A1840000094010A44500000
    M5 x 0.5 mmM8 x 1.25 mm8 mm6.9 mm
    		6.9 mm2—97255A1890000093904A77900000
    M5 x 0.8 mmM8 x 1.25 mm8 mm6.9 mm
    		6.9 mm2—97255A1910000093904A77900000
    M6 x 0.75 mmM10 x 1.25 mm10 mm8.8 mm
    		8.8 mm2—97255A1920000093904A78100000
    M6 x 1 mmM10 x 1.25 mm10 mm8.8 mm
    		8.8 mm2—97255A1930000093904A78100000
    M8 x 1.25 mmM12 x 1.25 mm12 mm10.8 mm
    		10.8 mm4—97255A1950000093904A78200000
    M10 x 1.5 mmM14 x 1.5 mm14 mm12.8 mm
    		12.8 mm4—97255A1860000093904A78300000
    M12 x 1.75 mmM16 x 1.5 mm16 mm14.75 mm
    		14.75 mm4—97255A1880000093904A78400000
     

    Mold-In Threaded Inserts for Plastic

    Image of Product. Bottom orientation. Threaded Inserts. Mold-In Threaded Inserts for Plastic.
    Mold the strongest metal threads into plastic parts. Designed for injection molding, these inserts become inseparable from your part. They form a stronger bond than heat-set and press-fit inserts and are better for frequent use than threads cut directly into material. Unlike heat-set inserts, they can be used in a wide variety of plastics, including thermoset plastics that can’t be reformed.
    To install, position these inserts in your mold cavity with a core pin (not included).
    Brass—Conductive and nonmagnetic, these inserts are useful for electrical applications. They resist moisture but aren't as strong as steel inserts.
    Lightweight Aluminum—At one-third the weight of steel or brass, use these inserts in robotics, aerospace parts, and other applications with strict weight limits. They also resist rust about as well as stainless steel but aren't as strong. Since inserts are lead-free, they can be safely recycled.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals. Since they’re lead-free, they can be safely recycled.
    Thread Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    For Core
    Pin Dia.
    Pkg.
    Qty.
    Pkg.
    Brass
    2-56
    		0.156"30 Ga.
    		0.133"0.072"257588N5900000
    4-40
    		0.187"19 Ga.
    		0.169"0.089"257588N6100000
    6-32
    		0.250"8 Ga.
    		0.200"0.110"257588N6200000
    8-32
    		0.281"1 Ga.
    		0.232"0.136"257588N6300000
    10-24
    		0.312"H
    		0.266"0.154"257588N6400000
    10-32
    		0.312"H
    		0.266"0.161"257588N6500000
    1/4"-20
    		0.468"25/64"
    		0.391"0.204"257588N6600000
    1/4"-28
    		0.468"25/64"
    		0.391"0.215"257588N670000
    5/16"-18
    		0.562"33/64"
    		0.516"0.261"107588N6800000
    3/8"-16
    		0.687"14.5 mm
    		0.578"0.318"57588N690000
    1/2"-13
    		0.875"49/64"
    		0.766"0.430"17588N710000
    M2 x 0.4 mm3.96 mm30 Ga.
    		3.37 mm1.700 mm257588N7200000
    M3 x 0.5 mm4.75 mm19 Ga.
    		4.29 mm2.500 mm257588N7300000
    M3.5 x 0.6 mm6.35 mm8 Ga.
    		5.08 mm3.000 mm257588N7400000
    M4 x 0.7 mm7.14 mm1 Ga.
    		5.89 mm3.400 mm257588N7500000
    M5 x 0.8 mm7.92 mmH
    		6.75 mm4.300 mm257588N7600000
    M6 x 1 mm11.89 mm25/64"
    		9.93 mm5.100 mm107588N770000
    M8 x 1.25 mm14.27 mm33/64"
    		13.1 mm6.800 mm57588N780000
    M10 x 1.5 mm17.45 mm14.5 mm
    		14.68 mm8.600 mm57588N790000
    M12 x 1.75 mm22.23 mm49/64"
    		19.45 mm10.300 mm57588N810000
     
    Lightweight Aluminum
    4-40
    		0.187"19 Ga.
    		0.169"0.089"257588N120000
    6-32
    		0.250"8 Ga.
    		0.200"0.110"257588N130000
    8-32
    		0.256"I
    		0.272"0.136"257588N2300000
    10-24
    		0.325"N
    		0.309"0.148"257588N2400000
    1/4"-20
    		0.394"23/64"
    		0.367"0.200"107588N250000
    5/16"-18
    		0.463"29/64"
    		0.463"0.257"57588N260000
    M4 x 0.7 mm6.5 mmI
    		6.9 mm3.200 mm107588N270000
    M5 x 0.8 mm8.25 mmN
    		7.85 mm4.300 mm107588N280000
    M6 x 1 mm10.00 mm23/64"
    		9.33 mm4.900 mm107588N2900000
    M8 x 1.25 mm11.75 mm29/64"
    		11.75 mm6.800 mm107588N3100000
     
    18-8 Stainless Steel
    0-80
    		0.125"48 Ga.
    		0.078"0.050"107588N990000
    2-56
    		0.125"9/64"
    		0.142"0.072"257588N10100000
    4-40
    		0.188"18 Ga.
    		0.171"0.089"257588N10200000
    6-32
    		0.219"7 Ga.
    		0.202"0.110"257588N10300000
    8-32
    		0.250"2 Ga.
    		0.226"0.136"107588N1040000
    10-24
    		0.281"F
    		0.259"0.154"107588N1050000
    10-32
    		0.281"F
    		0.259"0.161"107588N1060000
    1/4"-20
    		0.375"O
    		0.321"0.204"107588N1070000
    5/16"-18
    		0.469"Y
    		0.404"0.261"57588N10800000
    3/8"-16
    		0.562"29/64"
    		0.466"0.318"57588N10900000
    M3 x 0.5 mm4.77 mm18 Ga.
    		4.34 mm2.500 mm107588N1110000
    M4 x 0.7 mm6.35 mm2 Ga.
    		5.74 mm3.400 mm107588N1120000
    M5 x 0.8 mm7.13 mmF
    		6.57 mm4.300 mm107588N11300000
    M6 x 1 mm9.53 mmO
    		8.15 mm5.100 mm107588N11400000
    M10 x 1.5 mm14.27 mm29/64"
    		11.84 mm8.000 mm57588N11500000
     

    Tapping Threaded Inserts for Soft Metal

    Image of Product. Bottom orientation. Threaded Inserts. Tapping Threaded Inserts for Soft Metal.
    No need to tap the hole, these inserts cut their own threads into soft metal, such as aluminum. The teeth dig into the material to keep them secure when installing and removing screws. To install inserts with a wrench, thread an insert and two hex nuts onto a bolt. Then, grip and turn the top nut to drive into a drilled hole. If you need to add a lot of threaded connections quickly, use an installation tool with a ratchet wrench or drill press. These inserts are comparable to Tap-Lok inserts.
    Standard Wall—Stronger than thin-wall inserts, these are your go-to choice for threading most holes and replacing drilled out threads.
    Thin Wall—Use these inserts near the edge of workpieces or wherever you only have space for a small hole. They're also lighter than thick-wall inserts for applications with strict weight limitations.
    Zinc-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.
    Inserts
    Installation
    Tools
    Thread Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Each
    Each
    Standard Wall
     
    Zinc-Plated Steel
    2-56
    		0.188"1/8"
    		0.125"90240A6010000090240A0210000000
    4-40
    		0.234"21 Ga.
    		0.159"90240A007000090240A022000000
    6-32
    		0.281"13/64"
    		0.203"90240A008000090240A023000000
    8-32
    		0.328"15/64"
    		0.234"90240A009000090240A025000000
    10-24
    		0.375"J
    		0.277"90240A010000090240A027000000
    10-32
    		0.375"9/32"
    		0.281"90240A006000090240A028000000
    1/4"-20
    		0.484"11/32"
    		0.344"90240A001000090240A029000000
    1/4"-28
    		0.484"S
    		0.348"90240A604000090240A401000000
    5/16"-18
    		0.563"7/16"
    		0.438"90240A002000090240A030000000
    5/16"-24
    		0.563"7/16"
    		0.438"90240A605000090240A402000000
    3/8"-16
    		0.688"17/32"
    		0.531"90240A003000090240A031000000
    3/8"-24
    		0.688"17/32"
    		0.531"90240A606000090240A403000000
    7/16"-14
    		0.781"19/32"
    		0.594"90240A6070000090240A404000000
    1/2"-13
    		0.906"11/16"
    		0.688"90240A004000090240A033000000
    1/2"-20
    		0.906"17.5 mm
    		17.5 mm90240A6080000090240A405000000
    5/8"-11
    		1.125"55/64"
    		0.859"90240A0050000090240A034000000
    3/4"-10
    		1.375"1 1/64"
    		1.016"90240A6020000090240A406000000
    M3 x 0.5 mm6 mm21 Ga.
    		0.159"90240A200000090240A300000000
    M3.5 x 0.6 mm7.1 mm13/64"
    		0.203"90240A210000090240A305000000
    M4 x 0.7 mm8.2 mm15/64"
    		0.234"90240A215000090240A310000000
    M5 x 0.8 mm9.5 mmJ
    		0.277"90240A220000090240A315000000
    M6 x 1 mm12.3 mmS
    		0.348"90240A225000090240A320000000
    M8 x 1.25 mm14.2 mm7/16"
    		0.438"90240A230000090240A325000000
    M10 x 1.5 mm17.4 mm17/32"
    		0.531"90240A235000090240A330000000
    M12 x 1.75 mm23 mm17.5 mm
    		17.5 mm90240A6090000090240A407000000
    M14 x 2 mm25.4 mm19.5 mm
    		19.5 mm90240A6110000090240A408000000
    M16 x 2 mm28.5 mm55/64"
    		0.859"90240A6030000090240A409000000
    M20 x 2.5 mm27 mm63/64"
    		0.984"90240A61200000———0
     
    Thin Wall
     
    Zinc-Plated Steel
    1/4"-20
    		0.469"L
    		0.290"90240A613000090240A029000000
    5/16"-18
    		0.547"U
    		0.368"90240A614000090240A030000000
    3/8"-16
    		0.703"7/16"
    		0.438"90240A615000090240A031000000
    7/16"-14
    		0.859"33/64"
    		0.516"90240A616000090240A404000000
    1/2"-13
    		0.938"19/32"
    		0.594"90240A6170000090240A033000000
    M6 x 1 mm12 mmL
    		0.290"90240A618000090240A320000000
    M8 x 1.25 mm14 mmU
    		0.368"90240A619000090240A325000000
    M10 x 1.5 mm18 mm7/16"
    		0.438"90240A621000090240A330000000
    M12 x 1.75 mm22 mm33/64"
    		0.516"90240A6220000090240A407000000
     

    Tee-Nut Threaded Inserts for Wood

    Image of Product. Front orientation. Threaded Inserts. Tee-Nut Threaded Inserts for Wood.
    A four-pronged flange resists twisting in hardwood and softwood. These inserts are good for light duty assemblies that don't need the precise fit of tapping inserts. Hammer them into a drilled hole to install. The installed length includes the flange.
    Steel—Best for dry environments since moisture will cause these inserts to rust.
    Black-Oxide Steel—These inserts are often chosen for the dark, matte appearance. They're best for dry environments since they can rust when exposed to moisture.
    Zinc-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these inserts won't degrade when exposed to harsh weather, salt water, and most chemicals.
    Barrel
    Flange
    Thread Size
    Installed
    Lg.
    Dia.
    Lg.
    Dia.
    Thick.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Pkg.
    Qty.
    Pkg.
    Steel
    6-32
    		0.281"0.17"1/4"1/2"0.031"11/64"
    		0.172"10090975A10200000
    8-32
    		0.289"0.209"1/4"19/32"0.039"7/32"
    		0.219"10090975A1030000
    10-24
    		0.352"0.243"5/16"45/64"0.039"1/4"
    		0.250"5090975A1090000
    10-32
    		0.352"0.243"5/16"45/64"0.039"1/4"
    		0.250"5090975A3060000
    1/4"-20
    		0.235"0.305"3/16"3/4"0.047"5/16"
    		0.313"10090975A1040000
    1/4"-20
    		0.360"0.305"5/16"3/4"0.047"5/16"
    		0.313"10090975A30700000
    1/4"-20
    		0.360"0.305"5/16"1 1/4"0.047"5/16"
    		0.313"2590975A3080000
    1/4"-20
    		0.485"0.305"7/16"3/4"0.047"5/16"
    		0.313"10090975A30900000
    1/4"-20
    		0.610"0.305"9/16"3/4"0.047"5/16"
    		0.313"5090975A3110000
    1/4"-20
    		0.610"0.305"9/16"1 1/4"0.047"5/16"
    		0.313"2590975A3120000
    5/16"-18
    		0.438"0.39"3/8"7/8"0.063"25/64"
    		0.391"5090975A3130000
    5/16"-18
    		0.559"0.37"1/2"7/8"0.059"3/8"
    		0.375"2590975A3140000
    5/16"-18
    		0.688"0.37"5/8"7/8"0.055"3/8"
    		0.375"2590975A3160000
    5/16"-18
    		0.688"0.39"5/8"1 1/4"0.063"25/64"
    		0.391"1090975A3150000
    5/16"-18
    		0.934"0.37"7/8"7/8"0.059"3/8"
    		0.375"2590975A31700000
    3/8"-16
    		0.563"0.44"1/2"1"0.063"29/64"
    		0.453"10090975A10500000
    1/2"-13
    		0.466"0.591"3/8"1 1/4"0.091"19/32"
    		0.594"2090975A03300000
    5/8"-11
    		0.466"0.718"3/8"1 7/16"0.091"23/32"
    		0.719"1090975A31800000
    M4 x 0.7 mm7.2 mm5.2 mm6.4 mm18.3 mm0.8 mm5.6 mm
    		5.6 mm2590975A1110000
    M8 x 1.25 mm17.3 mm9.4 mm15.9 mm22 mm1.4 mm9.5 mm
    		9.5 mm1090975A1120000
     
    Black-Oxide Steel
    10-32
    		0.352"0.243"5/16"45/64"0.039"1/4"
    		0.250"2590975A3190000
    1/4"-20
    		0.360"0.305"5/16"3/4"0.047"5/16"
    		0.313"5090975A32100000
    1/4"-20
    		0.360"0.305"5/16"1 1/4"0.047"5/16"
    		0.313"1090975A3220000
    1/4"-20
    		0.485"0.305"7/16"3/4"0.047"5/16"
    		0.313"5090975A32300000
    1/4"-20
    		0.610"0.305"9/16"3/4"0.047"5/16"
    		0.313"2590975A3240000
    1/4"-20
    		0.610"0.305"9/16"1 1/4"0.047"5/16"
    		0.313"1090975A3250000
    5/16"-18
    		0.438"0.39"3/8"7/8"0.063"25/64"
    		0.391"2590975A3260000
    5/16"-18
    		0.559"0.37"1/2"7/8"0.059"3/8"
    		0.375"1090975A3270000
    5/16"-18
    		0.688"0.37"5/8"7/8"0.055"3/8"
    		0.375"1090975A3290000
    5/16"-18
    		0.688"0.39"5/8"1 1/4"0.063"25/64"
    		0.391"1090975A32800000
    5/16"-18
    		0.934"0.37"7/8"7/8"0.059"3/8"
    		0.375"1090975A3310000
    3/8"-16
    		0.466"0.44"7/16"1"0.063"29/64"
    		0.453"1090975A3320000
    1/2"-13
    		0.466"0.591"3/8"1 1/4"0.091"19/32"
    		0.594"590975A3350000
    5/8"-11
    		0.466"0.718"3/8"1 7/16"0.091"23/32"
    		0.719"590975A3340000
     
    Zinc-Plated Steel
    6-32
    		0.281"0.17"1/4"1/2"0.031"11/64"
    		0.172"10090975A1060000
    8-32
    		0.289"0.209"1/4"19/32"0.039"7/32"
    		0.219"10090975A1070000
    10-24
    		0.352"0.243"5/16"45/64"0.039"1/4"
    		0.250"5090975A30100000
    10-32
    		0.352"0.243"5/16"45/64"0.039"1/4"
    		0.250"5090975A3020000
    1/4"-20
    		0.235"0.305"3/16"3/4"0.047"5/16"
    		0.313"10090975A1130000
    1/4"-20
    		0.360"0.305"5/16"3/4"0.047"5/16"
    		0.313"10090975A02500000
    1/4"-20
    		0.360"0.305"5/16"1 1/4"0.047"5/16"
    		0.313"5090975A06000000
    1/4"-20
    		0.485"0.305"7/16"3/4"0.047"5/16"
    		0.313"10090975A02700000
    1/4"-20
    		0.610"0.305"9/16"3/4"0.047"5/16"
    		0.313"10090975A02900000
    1/4"-20
    		0.610"0.305"9/16"1 1/4"0.047"5/16"
    		0.313"2590975A06300000
    5/16"-18
    		0.438"0.37"3/8"7/8"0.055"3/8"
    		0.375"10090975A03000000
    5/16"-18
    		0.559"0.37"1/2"7/8"0.059"3/8"
    		0.375"5090975A07000000
    5/16"-18
    		0.688"0.37"5/8"7/8"0.055"3/8"
    		0.375"5090975A0360000
    5/16"-18
    		0.688"0.39"5/8"1 1/4"0.063"25/64"
    		0.391"1090975A30300000
    5/16"-18
    		0.934"0.37"7/8"7/8"0.059"3/8"
    		0.375"2590975A03900000
    3/8"-16
    		0.501"0.44"7/16"1"0.063"29/64"
    		0.453"5090975A03100000
    1/2"-13
    		0.466"0.591"3/8"1 1/4"0.091"19/32"
    		0.594"1090975A3040000
    5/8"-11
    		0.466"0.718"3/8"1 7/16"0.091"23/32"
    		0.719"590975A3050000
    M4 x 0.7 mm6 mm5.5 mm5.2 mm15 mm0.8 mm5.6 mm
    		5.6 mm10098965A11000000
    M4 x 0.7 mm8 mm5.5 mm7.2 mm15 mm0.8 mm5.6 mm
    		5.6 mm10098965A12000000
    M5 x 0.8 mm8 mm6.3 mm7 mm17 mm1 mm6.4 mm
    		6.4 mm10098965A21000000
    M5 x 0.8 mm12 mm6.2 mm11 mm17 mm1 mm6.4 mm
    		6.4 mm2598965A10200000
    M6 x 1 mm9 mm7.5 mm7.8 mm19 mm1.2 mm7.9 mm
    		7.9 mm5098965A31000000
    M6 x 1 mm12.1 mm7.5 mm10.9 mm19 mm1.2 mm7.9 mm
    		7.9 mm5098965A32000000
    M6 x 1 mm15.5 mm7.5 mm14.3 mm19 mm1.2 mm7.9 mm
    		7.9 mm2598965A1050000
    M8 x 1.25 mm11 mm9.5 mm9.4 mm22 mm1.6 mm10.2 mm
    		10.2 mm5098965A41000000
    M8 x 1.25 mm15 mm9.5 mm13.35 mm22 mm1.65 mm10.2 mm
    		10.2 mm5098965A42000000
    M8 x 1.25 mm17.3 mm9.4 mm15.9 mm22 mm1.4 mm9.5 mm
    		9.5 mm1098965A1060000
    M10 x 1.5 mm13 mm11.5 mm11.6 mm25.4 mm1.4 mm11.5 mm
    		11.5 mm2598965A51000000
    M10 x 1.5 mm16 mm11.1 mm15 mm25.4 mm1 mm11.5 mm
    		11.5 mm1098965A10300000
    M12 x 1.75 mm12 mm15 mm11 mm32 mm2 mm15 mm
    		15 mm598965A1040000
    M12 x 1.75 mm14 mm13.5 mm12.4 mm27 mm1.6 mm13.75 mm
    		13.75 mm5098965A10100000
     
    18-8 Stainless Steel
    6-32
    		0.281"0.169"1/4"1/2"0.031"11/64"
    		0.172"1090973A0350000
    8-32
    		0.288"0.213"1/4"1/2"0.038"7/32"
    		0.219"1090973A0380000
    10-24
    		0.319"0.232"9/32"3/4"0.038"15/64"
    		0.234"1090973A0400000
    1/4"-20
    		0.295"0.308"1/4"3/4"0.045"5/16"
    		0.311"1090973A1170000
    1/4"-20
    		0.425"0.311"3/8"3/4"0.05"5/16"
    		0.313"1090973A0290000
    1/4"-20
    		0.550"0.311"1/2"3/4"0.05"5/16"
    		0.313"1090973A11400000
    5/16"-18
    		0.437"0.391"3/8"7/8"0.062"13/32"
    		0.406"1090973A11500000
    5/16"-18
    		0.562"0.391"1/2"7/8"0.062"13/32"
    		0.406"1090973A11600000
    3/8"-16
    		0.513"0.471"7/16"1"0.075"31/64"
    		0.484"590973A12000000
    1/2"-13
    		0.591"0.591"1/2"1 1/4"0.091"19/32"
    		0.594"190973A1250000
    M4 x 0.7 mm7.1 mm5.2 mm6.3 mm15 mm0.8 mm5.6 mm
    		5.6 mm1094904A10100000
    M4 x 0.7 mm9.1 mm5.2 mm8.3 mm15 mm0.8 mm5.6 mm
    		5.6 mm1094904A10700000
    M5 x 0.8 mm8 mm6.2 mm7 mm17 mm1 mm6.4 mm
    		6.4 mm1094904A10200000
    M6 x 1 mm7.5 mm7.4 mm6.3 mm19 mm1.2 mm7.9 mm
    		7.9 mm1094904A10300000
    M6 x 1 mm9 mm7.5 mm7.8 mm19 mm1.2 mm7.9 mm
    		7.9 mm1094904A10400000
    M8 x 1.25 mm11 mm10 mm9.5 mm22.2 mm1.5 mm10.2 mm
    		10.2 mm594904A10500000
    M10 x 1.5 mm13 mm11.4 mm11.5 mm25.4 mm1.5 mm11.5 mm
    		11.5 mm594904A10600000
    M12 x 1.75 mm13 mm14.5 mm11 mm27 mm2 mm14.75 mm
    		14.75 mm194904A2010000
     
    Highly Corrosion-Resistant 316 Stainless Steel
    6-32
    		0.281"0.169"1/4"1/2"0.031"11/64"
    		0.172"1090973A4000000
    8-32
    		0.288"0.213"1/4"1/2"0.038"7/32"
    		0.219"1090973A40500000
    10-24
    		0.319"0.232"9/32"3/4"0.038"7/32"
    		0.219"1090973A4100000
    10-32
    		0.315"0.236"0.276"0.748"0.039"15/64"
    		0.234"1090973A10100000
    1/4"-20
    		0.295"0.311"0.248"0.748"0.047"5/16"
    		0.313"1090973A10200000
    1/4"-20
    		0.425"0.311"3/8"3/4"0.05"5/16"
    		0.313"1090973A41500000
    1/4"-20
    		0.606"0.311"0.559"0.748"0.047"5/16"
    		0.313"590973A10300000
    5/16"-18
    		0.437"0.391"3/8"7/8"0.062"13/32"
    		0.406"590973A4200000
    5/16"-18
    		0.500"0.391"0.441"0.874"0.059"13/32"
    		0.406"590973A10400000
    3/8"-16
    		0.516"0.471"0.437"1"0.079"31/64"
    		0.484"190973A1050000
    1/2"-13
    		0.516"0.583"0.437"1.248"0.079"19/32"
    		0.594"190973A1060000
    M4 x 0.7 mm7.1 mm5.2 mm6.3 mm15 mm0.8 mm5.6 mm
    		5.6 mm1094884A10100000
    M4 x 0.7 mm9.1 mm5.2 mm8.3 mm15 mm0.8 mm5.6 mm
    		5.6 mm1094884A1110000
    M5 x 0.8 mm8 mm6.2 mm7 mm17 mm1 mm6.4 mm
    		6.4 mm1094884A10200000
    M6 x 1 mm7.5 mm7.4 mm6.3 mm19 mm1.2 mm7.9 mm
    		7.9 mm1094884A10300000
    M6 x 1 mm9 mm7.5 mm7.8 mm19 mm1.2 mm7.9 mm
    		7.9 mm1094884A10400000
    M8 x 1.25 mm11 mm10 mm9.5 mm22.2 mm1.5 mm10.2 mm
    		10.2 mm594884A10500000
    M10 x 1.5 mm13 mm11.4 mm11.5 mm25.4 mm1.5 mm11.5 mm
    		11.5 mm594884A10600000
     

    Helical Threaded Inserts with Installation Tools

    Image of Product. Installation Tool and Through-Hole Tap. Front orientation. Threaded Inserts. Helical Threaded Inserts with Installation Tools, Pronged, Through-Hole Tap, Installation Tool.
    Image of Product. Drill Bit, Installation Tool and Through-Hole Tap. Front orientation. Threaded Inserts. Helical Threaded Inserts with Installation Tools, Pronged, Drill Bit, Through-Hole Tap, Installation Tool.

    Installation Tool and

    Through-Hole Tap

    Drill Bit, Installation Tool

    and Through-Hole Tap

    Quickly restore stripped threads—these inserts come with through-hole taps and installation tools. The tough coils on these inserts expand once installed to anchor in a tapped hole.
    Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Thread Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    No. of Inserts
    Included
    Includes
    Each
    Pronged
     
    18-8 Stainless Steel
    2-56
    		0.086"3/32"
    		0.094"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A1110000000
    2-56
    		0.129"3/32"
    		0.094"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A892000000
    2-56
    		0.172"3/32"
    		0.094"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A112000000
    2-56
    		0.215"3/32"
    		0.094"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A113000000
    4-40
    		0.112"31 Ga.
    		0.120"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A114000000
    4-40
    		0.168"31 Ga.
    		0.120"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A89900000
    4-40
    		0.224"31 Ga.
    		0.120"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A43000000
    4-40
    		0.280"31 Ga.
    		0.120"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A115000000
    4-40
    		0.336"31 Ga.
    		0.120"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A116000000
    6-32
    		0.138"26 Ga.
    		0.150"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A44000000
    6-32
    		0.207"26 Ga.
    		0.150"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A90600000
    6-32
    		0.276"26 Ga.
    		0.150"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A45000000
    6-32
    		0.345"26 Ga.
    		0.150"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A117000000
    6-32
    		0.414"26 Ga.
    		0.150"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A118000000
    8-32
    		0.164"17 Ga.
    		0.172"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A46000000
    8-32
    		0.246"17 Ga.
    		0.172"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A91000000
    8-32
    		0.328"17 Ga.
    		0.172"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A47000000
    8-32
    		0.410"17 Ga.
    		0.172"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A11900000
    8-32
    		0.492"17 Ga.
    		0.172"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A12100000
    10-24
    		0.190"13/64"
    		0.203"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A12200000
    10-24
    		0.285"13/64"
    		0.203"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A91400000
    10-24
    		0.380"13/64"
    		0.203"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A48000000
    10-24
    		0.475"13/64"
    		0.203"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A12300000
    10-24
    		0.570"13/64"
    		0.203"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A12400000
    10-32
    		0.190"7 Ga.
    		0.203"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A49000000
    10-32
    		0.285"7 Ga.
    		0.203"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A91600000
    10-32
    		0.380"7 Ga.
    		0.203"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A51000000
    10-32
    		0.475"7 Ga.
    		0.203"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A12500000
    10-32
    		0.570"7 Ga.
    		0.203"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A12600000
    12-24
    		0.324"15/64"
    		0.234"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A91800000
    1/4"-20
    		0.250"H
    		0.266"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A52000000
    1/4"-20
    		0.375"H
    		0.266"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A92200000
    1/4"-20
    		0.500"H
    		0.266"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A53000000
    1/4"-20
    		0.625"H
    		0.266"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A12700000
    1/4"-20
    		0.750"H
    		0.266"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A12800000
    1/4"-28
    		0.250"G
    		0.266"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A12900000
    1/4"-28
    		0.375"G
    		0.266"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A92400000
    1/4"-28
    		0.500"G
    		0.266"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A13100000
    1/4"-28
    		0.625"G
    		0.266"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A13200000
    5/16"-18
    		0.312"Q
    		0.328"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A54000000
    5/16"-18
    		0.469"Q
    		0.328"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A92600000
    5/16"-18
    		0.625"Q
    		0.328"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A55000000
    5/16"-18
    		0.781"Q
    		0.328"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A13300000
    5/16"-18
    		0.938"Q
    		0.328"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A13400000
    5/16"-24
    		0.312"21/64"
    		0.328"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A13500000
    5/16"-24
    		0.469"21/64"
    		0.328"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A92800000
    5/16"-24
    		0.625"21/64"
    		0.328"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A13600000
    3/8"-16
    		0.375"X
    		0.391"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A56000000
    3/8"-16
    		0.562"X
    		0.391"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A93000000
    3/8"-16
    		0.750"X
    		0.391"5Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A57000000
    3/8"-16
    		0.938"X
    		0.391"5Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A13700000
    3/8"-16
    		1.125"X
    		0.391"5Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A138000000
    3/8"-24
    		0.562"25/64"
    		0.391"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A93200000
    3/8"-24
    		0.750"25/64"
    		0.391"5Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A13900000
    7/16"-14
    		0.438"29/64"
    		0.453"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A14100000
    7/16"-14
    		0.656"29/64"
    		0.453"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A93400000
    7/16"-14
    		0.875"29/64"
    		0.453"5Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A142000000
    7/16"-20
    		0.438"29/64"
    		0.453"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A14300000
    7/16"-20
    		0.656"29/64"
    		0.453"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A93600000
    1/2"-13
    		0.500"33/64"
    		0.531"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A58000000
    1/2"-13
    		0.750"33/64"
    		0.531"5Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A93800000
    1/2"-13
    		1"33/64"
    		0.531"5Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A59000000
    1/2"-13
    		1.250"33/64"
    		0.531"5Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A144000000
    1/2"-13
    		1.500"33/64"
    		0.531"5Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A145000000
    1/2"-20
    		0.500"33/64"
    		0.531"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A146000000
    1/2"-20
    		0.750"33/64"
    		0.516"5Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A94000000
    1/2"-20
    		1"33/64"
    		0.531"5Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A147000000
    9/16"-12
    		0.844"19/32"
    		0.594"6Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A317000000
    9/16"-18
    		0.844"37/64"
    		0.578"6Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A337000000
    5/8"-11
    		0.625"21/32"
    		0.656"6Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A148000000
    5/8"-11
    		0.938"21/32"
    		0.656"6Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A018000000
    5/8"-11
    		1.250"21/32"
    		0.656"6Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A149000000
    5/8"-18
    		0.625"41/64"
    		0.656"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A151000000
    5/8"-18
    		0.938"41/64"
    		0.641"6Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A038000000
    3/4"-10
    		0.750"25/32"
    		0.781"5Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A152000000
    3/4"-10
    		1.125"25/32"
    		0.781"4Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A319000000
    3/4"-10
    		1.500"25/32"
    		0.781"5Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A153000000
    3/4"-16
    		1.125"49/64"
    		0.766"4Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A339000000
    7/8"-9
    		1.312"29/32"
    		0.906"6Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A320000000
    7/8"-14
    		1.312"57/64"
    		0.891"6Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A340000000
    1"-8
    		1.500"1 1/32"
    		1.031"6Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A321000000
    1"-12
    		1.500"1 1/64"
    		1.016"6Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A123000000
    1"-14
    		1.500"1 1/64"
    		1.016"6Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A121000000
    1 1/8"-7
    		1.688"1 5/32"
    		1.156"5Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A322000000
    1 1/8"-12
    		1.688"1 5/32"
    		1.156"5Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A125000000
    1 1/4"-7
    		1.875"1 9/32"
    		1.281"4Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A323000000
    1 1/4"-12
    		1.875"1 9/32"
    		1.281"4Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A129000000
    1 1/2"-6
    		2.250"1 17/32"
    		1.531"4Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A325000000
    1 1/2"-12
    		2.250"1 17/32"
    		1.531"4Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A13700000000
    M2.5 x 0.45 mm3.8 mm2.55 mm
    		0.102"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A873000000
    M3 x 0.5 mm3 mm3.15 mm
    		0.125"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A401000000
    M3 x 0.5 mm4.5 mm3.15 mm
    		0.125"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A942000000
    M3 x 0.5 mm6 mm3.15 mm
    		0.125"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A411000000
    M4 x 0.7 mm4 mm4.2 mm
    		0.172"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A42100000
    M4 x 0.7 mm6 mm4.2 mm
    		0.172"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A94400000
    M4 x 0.7 mm8 mm4.2 mm
    		0.172"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A43100000
    M4 x 0.7 mm10 mm4.2 mm
    		0.172"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A15400000
    M4 x 0.7 mm12 mm4.2 mm
    		0.172"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A15500000
    M5 x 0.8 mm5 mm5.2 mm
    		0.203"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A44100000
    M5 x 0.8 mm7.5 mm5.2 mm
    		0.203"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A94600000
    M5 x 0.8 mm10 mm5.2 mm
    		0.203"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A45100000
    M5 x 0.8 mm12.5 mm5.2 mm
    		0.203"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A15600000
    M5 x 0.8 mm15 mm5.2 mm
    		0.203"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A15700000
    M6 x 1 mm6 mm6.25 mm
    		0.250"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A46100000
    M6 x 1 mm9 mm6.25 mm
    		0.250"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A94800000
    M6 x 1 mm12 mm6.25 mm
    		0.250"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A47100000
    M6 x 1 mm15 mm6.25 mm
    		0.250"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A15800000
    M6 x 1 mm18 mm6.25 mm
    		0.250"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A15900000
    M7 x 1 mm10.5 mm7.25 mm
    		0.281"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A95000000
    M8 x 1 mm12 mm8.25 mm
    		0.328"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A82000000
    M8 x 1.25 mm8 mm8.3 mm
    		0.328"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A481000000
    M8 x 1.25 mm12 mm8.3 mm
    		0.328"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A95200000
    M8 x 1.25 mm16 mm8.3 mm
    		0.328"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A491000000
    M8 x 1.25 mm20 mm8.3 mm
    		0.328"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A16100000
    M8 x 1.25 mm24 mm8.3 mm
    		0.328"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A16200000
    M10 x 1 mm15 mm10.25 mm
    		0.406"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A962000000
    M10 x 1.25 mm10 mm10.25 mm
    		0.406"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A167000000
    M10 x 1.25 mm15 mm10.25 mm
    		0.406"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A82200000
    M10 x 1.5 mm10 mm10.5 mm
    		0.406"10Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A16300000
    M10 x 1.5 mm15 mm10.5 mm
    		0.406"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A95600000
    M10 x 1.5 mm20 mm10.5 mm
    		0.406"5Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A16400000
    M10 x 1.5 mm25 mm10.5 mm
    		0.406"5Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A165000000
    M10 x 1.5 mm30 mm10.5 mm
    		0.406"5Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A166000000
    M12 x 1.25 mm18 mm12.25 mm
    		0.484"5Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A96400000
    M12 x 1.5 mm18 mm12.25 mm
    		0.484"5Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A82400000
    M12 x 1.75 mm18 mm31/64"
    		0.484"5Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A96700000
    M14 x 1.5 mm21 mm14.25 mm
    		0.563"5Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A826000000
    M14 x 2 mm21 mm37/64"
    		0.578"12Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A068000000
    M16 x 2 mm24 mm21/32"
    		0.656"6Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A071000000
    M18 x 2.5 mm27 mm47/64"
    		0.734"6Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A073000000
    M20 x 2.5 mm30 mm13/16"
    		0.813"4Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A075000000
    M24 x 3 mm36 mm31/32"
    		0.969"5Installation Tool
    Through-Hole Tap    		91732A969000000
    M30 x 3.5 mm45 mm1 1/4"
    		1.250"5Installation Tool
    Through-Hole Tap    		91732A972000000
    M36 x 4 mm54 mm1 7/16"
    		1.438"4Installation Tool
    Through-Hole Tap    		91732A975000000
     

    Press-In Threaded Inserts for Soft Metal

    Image of Product. Bottom orientation. Threaded Inserts. Press-In Threaded Inserts for Soft Metal.
    Add threads to untapped holes in aluminum and other soft metal. Since these inserts are tapered, they align with the hole as you press them in. The knurls grip the material to keep inserts from twisting once installed. Inserts can also be used to add threads to tubing. Install them with an arbor press or similar pressure tool.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Zinc-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.
    Thread Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Pkg.
    Qty.
    Pkg.
    Tapered Profile
     
    18-8 Stainless Steel
    2-56
    		0.125"3/16"
    		0.188"1097191A10900000
    2-56
    		0.250"3/16"
    		0.188"1097191A1110000
    4-40
    		0.188"7/32"
    		0.219"1097191A1120000
    4-40
    		0.313"7/32"
    		0.219"1097191A1130000
    6-32
    		0.188"1/4"
    		0.250"1097191A1140000
    6-32
    		0.375"1/4"
    		0.250"1097191A1150000
    8-32
    		0.250"K
    		0.281"1097191A1160000
    8-32
    		0.469"K
    		0.281"1097191A11700000
    10-32
    		0.313"11/32"
    		0.344"597191A1180000
    10-32
    		0.531"11/32"
    		0.344"597191A1190000
    1/4"-20
    		0.375"7/16"
    		0.438"597191A1210000
    1/4"-20
    		0.625"7/16"
    		0.438"597191A12200000
    M3 x 0.5 mm4.5 mm5.6 mm
    		5.6 mm1097191A1230000
    M3 x 0.5 mm7.6 mm5.6 mm
    		5.6 mm1097191A1240000
    M4 x 0.7 mm6.4 mm7.2 mm
    		7.2 mm1097191A1250000
    M4 x 0.7 mm12.1 mm7.2 mm
    		7.2 mm1097191A12600000
    M5 x 0.8 mm7.6 mm8.7 mm
    		8.7 mm597191A1270000
    M5 x 0.8 mm13.3 mm8.7 mm
    		8.7 mm597191A1280000
    M6 x 1 mm9.5 mm11.1 mm
    		11.1 mm597191A1290000
    M6 x 1 mm15.9 mm11.1 mm
    		11.1 mm597191A13100000
     
    Zinc-Plated Steel
    2-56
    		0.156"12 Ga.
    		0.189"1097191A11000000
    4-40
    		0.188"7/32"
    		0.219"1097191A1300000
    6-32
    		0.250"1/4"
    		0.250"1097191A15000000
    8-32
    		0.281"9/32"
    		0.281"1097191A17000000
    10-24
    		0.313"5/16"
    		0.313"1097191A19000000
    10-32
    		0.313"5/16"
    		0.313"1097191A21000000
    1/4"-20
    		0.469"7/16"
    		0.438"1097191A23000000
    5/16"-18
    		0.625"9/16"
    		0.563"597191A25000000
    3/8"-16
    		0.750"17.5 mm
    		0.689"197191A2700000
    M2 x 0.4 mm4 mm4.7 mm
    		4.7 mm1097191A1010000
    M3 x 0.5 mm4.7 mm5.5 mm
    		5.5 mm1097191A1020000
    M3.5 x 0.6 mm6.4 mm6.4 mm
    		6.4 mm1097191A1030000
    M4 x 0.7 mm7.1 mm7.1 mm
    		7.1 mm1097191A1040000
    M5 x 0.8 mm7.9 mm7.9 mm
    		7.9 mm1097191A1050000
    M6 x 1 mm11.9 mm11.1 mm
    		11.1 mm1097191A10600000
    M8 x 1.25 mm15.9 mm14.3 mm
    		14.3 mm597191A1070000
    M10 x 1.5 mm19.1 mm17.5 mm
    		17.5 mm597191A10800000
     

    Key-Locking Threaded Inserts with Installation Tools

    Image of Product. Front orientation. Threaded Inserts. Key-Locking Threaded Inserts with Installation Tools.
    Paired with the right tool for installation, these inserts create strong threads in soft metal, such as aluminum. They have keys that drive into material to prevent inserts from slipping and rotating in the hole.
    Standard Wall—Stronger than thin-wall inserts, these are your go-to choice for threading most holes.
    Thin Wall—Use these inserts near the edge of workpieces or wherever you only have space for a small hole. They're also lighter than standard and extra-thick wall inserts for applications with strict weight limitations.
    Extra-Thick Wall—Stronger than standard- and thin-wall inserts, use them to reduce the size of tapped holes or replace threads that have been drilled out.
    Black Phosphate-Coated Steel—These inserts resist occasional moisture.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Thread Size
    For Tap Thread
    Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max. Hole
    Dia.
    No. of Locking
    Keys
    No. of Inserts
    Included
    Each
    Standard Wall
     
    Black Phosphate-Coated Steel
    8-32
    		5/16"-18
    		0.313"I
    		0.272"2990245A049000000
    10-24
    		3/8"-16
    		0.313"Q
    		0.332"2990245A01100000
    10-32
    		3/8"-16
    		0.313"Q
    		0.332"2990245A05100000
    1/4"-20
    		7/16"-14
    		0.375"X
    		0.397"2890245A01200000
    1/4"-28
    		7/16"-14
    		0.375"X
    		0.397"2890245A05200000
    5/16"-18
    		1/2"-13
    		0.438"29/64"
    		0.453"4790245A01300000
    5/16"-24
    		1/2"-13
    		0.438"29/64"
    		0.453"4790245A05300000
    3/8"-16
    		9/16"-12
    		0.500"33/64"
    		0.516"4690245A01400000
    3/8"-24
    		9/16"-12
    		0.500"33/64"
    		0.516"4690245A05400000
    7/16"-14
    		5/8"-11
    		0.625"37/64"
    		0.578"4690245A01500000
    7/16"-20
    		5/8"-11
    		0.625"37/64"
    		0.578"4690245A05500000
    1/2"-13
    		3/4"-16
    		0.625"45/64"
    		0.703"4490245A01600000
    1/2"-20
    		3/4"-16
    		0.625"45/64"
    		0.703"4490245A05600000
    9/16"-12
    		3/4"-16
    		0.813"45/64"
    		0.703"4390245A01700000
    9/16"-18
    		3/4"-16
    		0.813"45/64"
    		0.703"4390245A05700000
    5/8"-11
    		7/8"-14
    		0.875"53/64"
    		0.828"4390245A01800000
    5/8"-18
    		7/8"-14
    		0.875"53/64"
    		0.828"4390245A05800000
    3/4"-10
    		1 1/8"-12
    		1.125"1 1/16"
    		1.063"4390245A01900000
    3/4"-16
    		1 1/8"-12
    		1.125"1 1/16"
    		1.063"4390245A05900000
    7/8"-9
    		1 1/4"-12
    		1.250"1 3/16"
    		1.188"4390245A02100000
    7/8"-14
    		1 1/4"-12
    		1.250"1 3/16"
    		1.188"4390245A06100000
    1"-8
    		1 3/8"-12
    		1.375"1 5/16"
    		1.313"4290245A02200000
    1"-12
    		1 3/8"-12
    		1.375"1 5/16"
    		1.313"4290245A06200000
    1"-14
    		1 3/8"-12
    		1.375"1 5/16"
    		1.313"4290245A07000000
    1 1/8"-7
    		1 1/2"-12
    		1.438"1 7/16"
    		1.438"4290245A063000000
    1 1/4"-7
    		1 5/8"-12
    		1.813"—1.563"4290245A065000000
    1 1/4"-12
    		1 5/8"-12
    		1.813"—1.563"4290245A066000000
    1 1/2"-6
    		1 7/8"-12
    		2"—1 13/16"
    1.813"    		4290245A067000000
    M6 x 1 mm3/8"-16
    		0.310"Q
    		0.332"2890699A11000000
    M8 x 1.25 mm1/2"-13
    		0.430"29/64"
    		0.453"4890699A11500000
    M10 x 1.5 mm5/8"-11
    		0.500"37/64"
    		0.578"4690699A12000000
    M12 x 1.75 mm3/4"-16
    		0.620"45/64"
    		0.703"4490699A12500000
    M14 x 1.5 mmM20 x 1.5 mm20 mm18.75 mm
    		18.75 mm4490245A30600000
    M14 x 2 mm7/8"-14
    		0.810"53/64"
    		0.828"4390699A13000000
    M14 x 2 mmM20 x 1.5 mm20 mm18.75 mm
    		18.75 mm4490245A30100000
    M16 x 1.5 mmM22 x 1.5 mm22 mm20.5 mm
    		20.5 mm4390245A31600000
    M16 x 2 mm1"-12
    		0.870"15/16"
    		0.938"4390699A13500000
    M16 x 2 mmM22 x 1.5 mm22 mm20.5 mm
    		20.5 mm4390245A31100000
    M18 x 1.5 mmM24 x 1.5 mm24 mm22.5 mm
    		22.5 mm4290245A32100000
    M20 x 1.5 mmM30 x 2 mm30 mm28 mm
    		28 mm4390245A33100000
    M20 x 2.5 mmM30 x 2 mm30 mm28 mm
    		28 mm4390245A32600000
    M22 x 1.5 mmM32 x 2 mm32 mm30 mm
    		30 mm4390245A336000000
    M24 x 3 mmM33 x 2 mm33 mm31 mm
    		31 mm4290245A341000000
     
    18-8 Stainless Steel
    8-32
    		5/16"-18
    		0.313"I
    		0.272"2991731A00700000
    10-24
    		3/8"-16
    		0.313"Q
    		0.332"2991731A01100000
    10-32
    		3/8"-16
    		0.313"Q
    		0.332"2991731A00900000
    1/4"-20
    		7/16"-14
    		0.375"X
    		0.397"2891731A01200000
    1/4"-28
    		7/16"-14
    		0.375"X
    		0.397"2891731A02600000
    5/16"-18
    		1/2"-13
    		0.438"29/64"
    		0.453"4791731A01300000
    5/16"-24
    		1/2"-13
    		0.438"29/64"
    		0.453"4791731A02700000
    3/8"-16
    		9/16"-12
    		0.500"33/64"
    		0.516"4691731A01400000
    3/8"-24
    		9/16"-12
    		0.500"33/64"
    		0.516"4691731A02500000
    7/16"-14
    		5/8"-11
    		0.625"37/64"
    		0.578"4691731A01500000
    7/16"-20
    		5/8"-11
    		0.625"37/64"
    		0.578"4691731A03100000
    1/2"-13
    		3/4"-16
    		0.625"45/64"
    		0.703"4491731A01900000
    1/2"-20
    		3/4"-16
    		0.625"45/64"
    		0.703"4491731A04800000
    9/16"-12
    		3/4"-16
    		0.813"45/64"
    		0.703"4391731A01700000
    9/16"-18
    		3/4"-16
    		0.813"45/64"
    		0.703"4391731A03300000
    5/8"-11
    		7/8"-14
    		0.875"53/64"
    		0.828"4391731A01800000
    5/8"-18
    		7/8"-14
    		0.875"53/64"
    		0.828"4391731A07000000
    3/4"-10
    		1 1/8"-12
    		1.125"1 1/16"
    		1.063"4391731A023000000
    3/4"-16
    		1 1/8"-12
    		1.125"1 1/16"
    		1.063"4391731A035000000
    7/8"-9
    		1 1/4"-12
    		1.250"1 3/16"
    		1.188"4391731A038000000
    1"-8
    		1 3/8"-12
    		1.375"1 5/16"
    		1.313"4291731A044000000
    M14 x 2 mmM20 x 1.5 mm20 mm18.75 mm
    		18.75 mm4493715A455000000
    M16 x 1.5 mmM22 x 1.5 mm22 mm20.5 mm
    		20.5 mm4393715A470000000
    M16 x 2 mmM22 x 1.5 mm22 mm20.5 mm
    		20.5 mm4393715A465000000
    M18 x 1.5 mmM24 x 1.5 mm24 mm22.5 mm
    		22.5 mm4293715A475000000
    M20 x 1.5 mmM30 x 2 mm30 mm28 mm
    		28 mm4393715A485000000
    M20 x 2.5 mmM30 x 2 mm30 mm28 mm
    		28 mm4393715A480000000
     
    Thin Wall
     
    Black Phosphate-Coated Steel
    10-24
    		5/16"-18
    		0.313"I
    		0.272"2992070A30600000
    10-32
    		5/16"-18
    		0.313"I
    		0.272"2992070A31200000
    1/4"-20
    		3/8"-16
    		0.375"Q
    		0.332"2892070A31900000
    1/4"-28
    		3/8"-16
    		0.375"Q
    		0.332"2892070A32500000
    5/16"-18
    		7/16"-14
    		0.438"X
    		0.397"4792070A33100000
    5/16"-24
    		7/16"-14
    		0.438"X
    		0.397"4792070A33700000
    3/8"-16
    		1/2"-13
    		0.500"29/64"
    		0.453"4692070A34400000
    3/8"-24
    		1/2"-13
    		0.500"29/64"
    		0.453"4692070A35000000
    7/16"-14
    		9/16"-12
    		0.563"33/64"
    		0.516"4692070A35700000
    7/16"-20
    		9/16"-12
    		0.563"33/64"
    		0.516"4692070A36300000
    1/2"-13
    		5/8"-11
    		0.625"37/64"
    		0.578"4492070A37000000
    1/2"-20
    		5/8"-11
    		0.625"37/64"
    		0.578"4492070A37600000
    M5 x 0.8 mmM8 x 1.25 mm8 mm6.9 mm
    		6.9 mm2890245A16000000
    M6 x 1 mmM10 x 1.25 mm10 mm8.8 mm
    		8.8 mm2890245A16200000
    M8 x 1 mmM12 x 1.25 mm12 mm10.8 mm
    		10.8 mm2690245A16300000
    M8 x 1.25 mmM12 x 1.25 mm12 mm10.8 mm
    		10.8 mm2690245A16400000
    M10 x 1.25 mmM14 x 1.5 mm14 mm12.8 mm
    		12.8 mm4490245A16500000
    M10 x 1.5 mmM14 x 1.5 mm14 mm12.8 mm
    		12.8 mm4490245A16600000
    M12 x 1.25 mmM16 x 1.5 mm16 mm14.75 mm
    		14.75 mm4390245A16900000
    M12 x 1.75 mmM16 x 1.5 mm16 mm14.75 mm
    		14.75 mm4390245A16800000
     
    18-8 Stainless Steel
    10-24
    		5/16"-18
    		0.313"I
    		0.272"2993340A60700000
    10-32
    		5/16"-18
    		0.313"I
    		0.272"2993340A61800000
    1/4"-20
    		3/8"-16
    		0.375"Q
    		0.332"2893340A62900000
    1/4"-28
    		3/8"-16
    		0.375"Q
    		0.332"2893340A64000000
    5/16"-18
    		7/16"-14
    		0.438"X
    		0.397"4793340A65100000
    5/16"-24
    		7/16"-14
    		0.438"X
    		0.397"4793340A66200000
    3/8"-16
    		1/2"-13
    		0.500"29/64"
    		0.453"4693340A67300000
    3/8"-24
    		1/2"-13
    		0.500"29/64"
    		0.453"4693340A68400000
    7/16"-14
    		9/16"-12
    		0.563"33/64"
    		0.516"4693340A695000000
    7/16"-20
    		9/16"-12
    		0.563"33/64"
    		0.516"4693340A706000000
    1/2"-13
    		5/8"-11
    		0.625"37/64"
    		0.578"4493340A71700000
    1/2"-20
    		5/8"-11
    		0.625"37/64"
    		0.578"4493340A72800000
    M5 x 0.8 mmM8 x 1.25 mm8 mm6.9 mm
    		6.9 mm2893715A415000000
    M6 x 1 mmM10 x 1.25 mm10 mm8.8 mm
    		8.8 mm2893715A420000000
    M8 x 1 mmM12 x 1.25 mm12 mm10.8 mm
    		10.8 mm4693715A425000000
    M8 x 1.25 mmM12 x 1.25 mm12 mm10.8 mm
    		10.8 mm4693715A430000000
    M10 x 1.25 mmM14 x 1.5 mm14 mm12.8 mm
    		12.8 mm4493715A43500000
    M10 x 1.5 mmM14 x 1.5 mm14 mm12.8 mm
    		12.8 mm4493715A44000000
    M12 x 1.25 mmM16 x 1.5 mm16 mm14.75 mm
    		14.75 mm4393715A44500000
    M12 x 1.75 mmM16 x 1.5 mm16 mm14.75 mm
    		14.75 mm4393715A45000000
     
    Extra-Thick Wall
     
    Black Phosphate-Coated Steel
    1/4"-20
    		1/2"-13
    		0.375"29/64"
    		0.453"2893302A410000000
    5/16"-18
    		9/16"-12
    		0.438"33/64"
    		0.516"4793302A420000000
    3/8"-16
    		5/8"-11
    		0.500"37/64"
    		0.578"4693302A430000000
    1/2"-13
    		7/8"-14
    		0.688"53/64"
    		0.828"4493302A440000000
    5/8"-11
    		1"-12
    		0.875"15/16"
    		0.936"4393302A450000000
    3/4"-10
    		1 1/4"-12
    		1.125"1 3/16"
    		1.188"4393302A460000000
     

    Seize-Resistant Helical Threaded Inserts

    Install and remove screws repeatedly without sticking or binding. These inserts have a dry-film lubricant on their surface for smooth installation. They're ideal for parts that require frequent disassembly for inspection or repair. Also known as Heli-Coil inserts.
    Installation requires a drill bit, a helical insert tap, and an installation tool.
    Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.
    Prongless—Without a prong to break off and retrieve, these inserts save time and avoid leftover debris in holes.
    Dry-Film-Lubricated 18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Inserts
    Through-Hole
    Taps
    Closed-End
    Hole Taps
    Installation
    Tools
    Prong
    Break-Off Tools
    Thread Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Each
    Each
    Each
    Each
    Pronged
    Image of Product. Pronged. Bottom orientation. Threaded Inserts. Seize-Resistant Helical Threaded Inserts, Pronged.

    Pronged

     
    Dry-Film-Lubricated 18-8 Stainless Steel
    2-56
    		0.086"41 Ga.
    		0.096"MIL-I-8846, MS122095191000A1100000091709A09800000091709A40100000090261A14000000092955A1010000000
    2-56
    		0.129"41 Ga.
    		0.096"MIL-I-8846, MS122135191000A113000091709A0980000091709A4010000090261A1400000092955A101000000
    2-56
    		0.172"41 Ga.
    		0.096"MIL-I-8846, MS122175191000A116000091709A0980000091709A4010000090261A1400000092955A101000000
    4-40
    		0.112"31 Ga.
    		0.120"MIL-I-8846, MS122076191000A121000091709A1010000091709A4070000090261A15100000092955A103000000
    4-40
    		0.168"31 Ga.
    		0.120"MIL-I-8846, MS122116191000A124000091709A1010000091709A4070000090261A15100000092955A103000000
    4-40
    		0.224"31 Ga.
    		0.120"MIL-I-8846, MS122156191000A127000091709A1010000091709A4070000090261A15100000092955A103000000
    6-32
    		0.138"25 Ga.
    		0.150"MIL-I-8846, MS122078191000A132000091709A1020000091709A4160000090261A15200000092955A10500000
    6-32
    		0.207"25 Ga.
    		0.150"MIL-I-8846, MS122118191000A135000091709A1020000091709A4160000090261A15200000092955A10500000
    6-32
    		0.276"25 Ga.
    		0.150"MIL-I-8846, MS122158191000A138000091709A1020000091709A4160000090261A15200000092955A10500000
    10-24
    		0.285"5 Ga.
    		0.206"MIL-I-8846, MS122120191000A144000091709A1040000091709A4280000090261A15400000092955A10900000
    10-32
    		0.190"13/64"
    		0.203"MIL-I-8846, MS124655191000A172000091709A1510000091709A4310000090261A16100000092955A10900000
    10-32
    		0.285"13/64"
    		0.203"MIL-I-8846, MS124695191000A174000091709A1510000091709A4310000090261A16100000092955A10900000
    10-32
    		0.380"13/64"
    		0.203"MIL-I-8846, MS124735191000A177000091709A1510000091709A4310000090261A16100000092955A10900000
    1/4"-20
    		0.250"H
    		0.266"MIL-I-8846, MS122081191000A150000091709A1050000091709A4370000090261A15500000092955A11100000
    1/4"-20
    		0.375"H
    		0.266"MIL-I-8846, MS122121191000A153000091709A1050000091709A4370000090261A15500000092955A11100000
    1/4"-20
    		0.500"H
    		0.266"MIL-I-8846, MS122161191000A156000091709A1050000091709A4370000090261A15500000092955A11100000
    5/16"-18
    		0.312"Q
    		0.332"MIL-I-8846, MS122082191000A160000091709A1060000091709A4430000090261A15600000092955A113000000
    5/16"-18
    		0.469"Q
    		0.332"MIL-I-8846, MS122121191000A164000091709A1060000091709A4430000090261A15600000092955A113000000
    5/16"-18
    		0.625"Q
    		0.332"MIL-I-8846, MS122162191000A168000091709A1060000091709A4430000090261A15600000092955A113000000
    M2.5 x 0.45 mm2.5 mm37 Ga.
    		0.104"DIN 8140, SAE MA3280-101, MIL-I-8846191000A016000091709A6780000091709A5780000090261A18700000092955A204000000
    M2.5 x 0.45 mm5 mm37 Ga.
    		0.104"DIN 8140, SAE MA3280-201, MIL-I-8846191000A019000091709A6780000091709A5780000090261A18700000092955A204000000
    M3 x 0.5 mm3 mm3.2 mm
    		3.2 mmDIN 8140, SAE MA3280-102, MIL-I-8846191000A022000091709A3550000091709A5240000090261A18800000092955A155000000
    M3 x 0.5 mm4.5 mm3.2 mm
    		3.2 mmDIN 8140, SAE MA3280-152, MIL-I-8846191000A025000091709A3550000091709A5240000090261A18800000092955A155000000
    M3 x 0.5 mm6 mm3.2 mm
    		3.2 mmDIN 8140, SAE MA3280-202, MIL-I-8846191000A028000091709A3550000091709A5240000090261A18800000092955A155000000
    M4 x 0.7 mm4 mm19 Ga.
    		0.166"DIN 8140, SAE MA3280-104, MIL-I-8846191000A031000091709A3590000091709A5270000090261A19000000092955A160000000
    M4 x 0.7 mm6 mm19 Ga.
    		0.166"DIN 8140, SAE MA3280-154, MIL-I-8846191000A034000091709A3590000091709A5270000090261A19000000092955A160000000
    M4 x 0.7 mm8 mm19 Ga.
    		0.166"DIN 8140, SAE MA3280-204, MIL-I-8846191000A037000091709A3590000091709A5270000090261A19000000092955A160000000
    M5 x 0.8 mm5 mm5.3 mm
    		5.3 mmDIN 8140, SAE MA3280-105, MIL-I-8846191000A042000091709A2010000091709A5300000090261A19100000092955A12900000
    M5 x 0.8 mm7.5 mm5.3 mm
    		5.3 mmDIN 8140, SAE MA3280-155, MIL-I-8846191000A046000091709A2010000091709A5300000090261A19100000092955A12900000
    M6 x 1 mm6 mm6.3 mm
    		6.3 mmDIN 8140, SAE MA3280-106, MIL-I-8846191000A050000091709A2020000091709A5330000090261A19200000092955A13100000
    M6 x 1 mm9 mm6.3 mm
    		6.3 mmDIN 8140, SAE MA3280-156, MIL-I-8846191000A053000091709A2020000091709A5330000090261A19200000092955A13100000
    M6 x 1 mm12 mm6.3 mm
    		6.3 mmDIN 8140, SAE MA3280-206, MIL-I-8846191000A057000091709A2020000091709A5330000090261A19200000092955A13100000
    M8 x 1.25 mm8 mm8.4 mm
    		8.4 mmSAE MA3280-109, MIL-I-8846191000A065000091709A2040000091709A5420000090261A19400000092955A133000000
    M8 x 1.25 mm12 mm8.4 mm
    		8.4 mmDIN 8140, SAE MA3280-159, MIL-I-8846191000A069000091709A2040000091709A5420000090261A19400000092955A133000000
    M8 x 1.25 mm16 mm8.4 mm
    		8.4 mmDIN 8140, SAE MA3280-209, MIL-I-8846191000A062000091709A2040000091709A5420000090261A19400000092955A133000000
     
    Prongless
    Image of Product. Prongless. Bottom orientation. Threaded Inserts. Seize-Resistant Helical Threaded Inserts, Prongless.

    Prongless

     
    Dry-Film-Lubricated 18-8 Stainless Steel
    2-56
    		0.086"41 Ga.
    		0.096"NAS1130-02-10D591990A301000091709A0980000091709A4010000091049A601000000———0
    2-56
    		0.129"41 Ga.
    		0.096"NAS1130-02-15D591990A304000091709A0980000091709A4010000091049A601000000———0
    2-56
    		0.172"41 Ga.
    		0.096"NAS1130-02-20D591990A307000091709A0980000091709A4010000091049A601000000———0
    4-40
    		0.112"31 Ga.
    		0.120"NAS1130-04-10D591990A310000091709A1010000091709A4070000091049A604000000———0
    4-40
    		0.168"31 Ga.
    		0.120"NAS1130-04-15D591990A313000091709A1010000091709A4070000091049A604000000———0
    4-40
    		0.224"31 Ga.
    		0.120"NAS1130-04-20D591990A316000091709A1010000091709A4070000091049A604000000———0
    6-32
    		0.138"25 Ga.
    		0.150"NAS1130-06-10D591990A319000091709A1020000091709A4160000091049A607000000———0
    6-32
    		0.207"25 Ga.
    		0.150"NAS1130-06-15D591990A322000091709A1020000091709A4160000091049A607000000———0
    6-32
    		0.276"25 Ga.
    		0.150"NAS1130-06-20D591990A325000091709A1020000091709A4160000091049A607000000———0
    8-32
    		0.164"16 Ga.
    		0.177"NAS1130-08-10D591990A328000091709A1030000091709A4220000091049A610000000———0
    8-32
    		0.246"16 Ga.
    		0.177"NAS1130-08-15D591990A331000091709A1030000091709A4220000091049A610000000———0
    8-32
    		0.328"16 Ga.
    		0.177"NAS1130-08-20D591990A334000091709A1030000091709A4220000091049A610000000———0
    10-32
    		0.190"13/64"
    		0.203"NAS1130-3-10D591990A337000091709A1510000091709A4310000091049A812000000———0
    10-32
    		0.285"13/64"
    		0.203"NAS1130-3-15D591990A340000091709A1510000091709A4310000091049A812000000———0
    10-32
    		0.380"13/64"
    		0.203"NAS1130-3-20D591990A343000091709A1510000091709A4310000091049A812000000———0
    1/4"-20
    		0.250"H
    		0.266"NAS1130-4-10D591990A355000091709A1050000091709A4370000091049A619000000———0
    1/4"-20
    		0.375"H
    		0.266"NAS1130-4-15D591990A358000091709A1050000091709A4370000091049A619000000———0
    1/4"-20
    		0.500"H
    		0.266"NAS1130-4-20D591990A361000091709A1050000091709A4370000091049A619000000———0
     

    Twist-Resistant Press-In Threaded Inserts for Plastic

    Image of Product. Bottom orientation. Threaded Inserts. Twist-Resistant Press-In Threaded Inserts for Plastic.
    The hex-shaped body resists loosening and twisting in round holes for a more secure hold than other press-in inserts for plastic. Unlike screw-to-expand inserts, these inserts stay put even before you screw in a fastener. However, they may lose strength if screws are repeatedly removed and reinserted. Install inserts with an arbor press or similar pressure tool.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals. Since they’re lead-free, they can be safely recycled.
    Lightweight Aluminum—At one-third the weight of steel or brass, use these inserts in robotics, aerospace parts, and other applications with strict weight limits. They also resist rust about as well as stainless steel but aren't as strong. Since inserts are lead-free, they can be safely recycled.
    Thread Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Pkg.
    Qty.
    Pkg.
    Standard Profile
     
    18-8 Stainless Steel
    2-56
    		0.230"3/16"
    		0.188"2592398A310000000
    4-40
    		0.234"3/16"
    		0.188"2592398A11200000
    6-32
    		0.234"3/16"
    		0.188"2592398A11300000
    8-32
    		0.266"1/4"
    		0.250"2592398A11400000
    10-24
    		0.265"1/4"
    		0.250"1092398A3200000
    10-32
    		0.266"1/4"
    		0.250"2592398A11500000
    1/4"-20
    		0.313"5/16"
    		0.313"1092398A1160000
    5/16"-18
    		0.365"3/8"
    		0.375"1092398A33000000
    M2.5 x 0.45 mm5.8 mm4.7 mm
    		4.7 mm1092398A10100000
    M3 x 0.5 mm5.8 mm4.7 mm
    		4.7 mm2592398A12100000
    M3.5 x 0.6 mm5.8 mm4.7 mm
    		4.7 mm2592398A41000000
    M4 x 0.7 mm6.7 mm6.3 mm
    		6.3 mm2592398A12300000
    M5 x 0.8 mm6.7 mm6.3 mm
    		6.3 mm2592398A12500000
    M6 x 1 mm8 mm7.9 mm
    		7.9 mm1092398A1270000
    M8 x 1.25 mm9.27 mm9.6 mm
    		9.6 mm1092398A34000000
     
    Lightweight Aluminum
    2-56
    		0.234"3/16"
    		0.188"5092397A11700000
    4-40
    		0.234"3/16"
    		0.188"5092397A1120000
    6-32
    		0.234"3/16"
    		0.188"5092397A11300000
    8-32
    		0.266"1/4"
    		0.250"5092397A11400000
    10-24
    		0.265"1/4"
    		0.250"2592397A21000000
    10-32
    		0.266"1/4"
    		0.250"5092397A11500000
    1/4"-20
    		0.313"5/16"
    		0.313"2592397A11600000
    M2.5 x 0.45 mm5.84 mm4.75 mm
    		4.75 mm2592003A1500000
    M3 x 0.5 mm5.84 mm3/16"
    		0.188"2592003A1100000
    M3.5 x 0.6 mm5.84 mm4.75 mm
    		4.75 mm2592003A1600000
    M4 x 0.7 mm6.73 mm1/4"
    		0.250"2592003A1200000
    M5 x 0.8 mm6.73 mm1/4"
    		0.250"2592003A1300000
    M6 x 1 mm8 mm7.9 mm
    		7.9 mm2592003A14000000
     

    Any-Orientation Heat-Set Threaded Inserts for Plastic

    Image of Product. Bottom orientation. Threaded Inserts. Any-Orientation Heat-Set Threaded Inserts for Plastic.
    Quicker to install than standard heat-set inserts, these go in either way. There’s no need to check which end is up, so they’re ideal for automated production of parts. Press inserts into straight holes that have been drilled, printed, or molded into plastic. Use a soldering tip to heat them and melt the surrounding material, fusing it to the insert’s sharp ridges.
    Brass—Conductive and nonmagnetic, these inserts are useful for electrical applications. They resist moisture but aren't as strong as steel inserts.
    Lightweight Aluminum—At one-third the weight of steel or brass, use these inserts in robotics, aerospace parts, and other applications with strict weight limits. They also resist rust about as well as stainless steel but aren't as strong. Since inserts are lead-free, they can be safely recycled.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals. Since they’re lead-free, they can be safely recycled.
    Inserts
    Soldering
    Installation Tips
    Extraction Tips
    Thread Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Pkg.
    Qty.
    Pkg.
    Each
    Each
    Standard Profile
     
    Brass
    2-56
    		0.115"1/8"
    		0.126"2593502A11700000092160A3110000092160A201000000
    2-56
    		0.125"1/8"
    		0.126"5093502A101000092160A311000092160A20100000
    2-56
    		0.157"1/8"
    		0.126"2593502A1180000092160A311000092160A20100000
    4-40
    		0.140"22 Ga.
    		0.157"5093502A102000092160A315000092160A20300000
    4-40
    		0.226"22 Ga.
    		0.157"2593502A119000092160A315000092160A20300000
    6-32
    		0.150"3/16"
    		0.188"5093502A1030000092160A319000092160A20500000
    6-32
    		0.281"3/16"
    		0.188"2593502A121000092160A319000092160A20500000
    8-32
    		0.185"2 Ga.
    		0.221"2593502A104000092160A323000092160A20700000
    8-32
    		0.321"2 Ga.
    		0.221"2593502A122000092160A323000092160A20700000
    10-24
    		0.250"1/4"
    		0.252"2593502A105000092160A327000092160A20900000
    10-24
    		0.375"1/4"
    		0.252"2593502A123000092160A327000092160A20900000
    10-32
    		0.250"1/4"
    		0.252"2593502A106000092160A327000092160A21100000
    10-32
    		0.375"1/4"
    		0.252"2593502A1240000092160A327000092160A21100000
    1/4"-20
    		0.312"8 mm
    		0.315"2593502A1070000092160A331000092160A21300000
    1/4"-20
    		0.500"8 mm
    		0.315"2593502A1250000092160A331000092160A21300000
    5/16"-18
    		0.500"V
    		0.377"1093502A126000092160A3080000092160A10500000
    M2 x 0.4 mm3.2 mm1/8"
    		3.2 mm5093502A108000092160A34100000———0
    M2 x 0.4 mm3.9 mm1/8"
    		3.2 mm2593502A136000092160A34100000———0
    M2.5 x 0.45 mm3.6 mm22 Ga.
    		3.99 mm5093502A109000092160A315000092160A22500000
    M3 x 0.5 mm3.6 mm22 Ga.
    		3.99 mm5093502A111000092160A315000092160A22700000
    M3 x 0.5 mm5.7 mm22 Ga.
    		3.99 mm2593502A137000092160A315000092160A22700000
    M3.5 x 0.6 mm3.8 mm3/16"
    		4.78 mm2593502A112000092160A319000092160A10100000
    M4 x 0.7 mm4.7 mm2 Ga.
    		5.61 mm2593502A113000092160A323000092160A22900000
    M4 x 0.7 mm8.2 mm2 Ga.
    		5.61 mm5093502A1380000092160A323000092160A22900000
    M5 x 0.8 mm6.4 mm1/4"
    		6.4 mm2593502A114000092160A327000092160A23100000
    M5 x 0.8 mm9.5 mm1/4"
    		6.4 mm2593502A1390000092160A327000092160A23100000
    M6 x 1 mm7.9 mm8 mm
    		8 mm2593502A1150000092160A327000092160A23300000
    M6 x 1 mm12.7 mm8 mm
    		8 mm2593502A1410000092160A327000092160A23300000
    M8 x 1.25 mm12.7 mmV
    		9.58 mm1093502A142000092160A3080000092160A10200000
     
    Lightweight Aluminum
    2-56
    		0.157"1/8"
    		0.126"2593502A149000092160A311000092160A20100000
    4-40
    		0.226"22 Ga.
    		0.157"2593502A151000092160A315000092160A20300000
    6-32
    		0.281"3/16"
    		0.188"2593502A152000092160A319000092160A20500000
    8-32
    		0.321"2 Ga.
    		0.221"2593502A153000092160A323000092160A20700000
    10-32
    		0.375"1/4"
    		0.252"2593502A154000092160A327000092160A21100000
    1/4"-20
    		0.500"8 mm
    		0.315"2593502A155000092160A331000092160A21300000
    M3 x 0.5 mm5.7 mm22 Ga.
    		3.99 mm2593502A156000092160A315000092160A22700000
    M4 x 0.7 mm8.2 mm2 Ga.
    		5.61 mm2593502A157000092160A323000092160A22900000
    M5 x 0.8 mm9.5 mm1/4"
    		6.4 mm2593502A158000092160A327000092160A23100000
    M6 x 1 mm12.7 mm8 mm
    		8 mm2593502A159000092160A327000092160A23300000
     
    18-8 Stainless Steel
    2-56
    		0.115"1/8"
    		0.126"593502A127000092160A311000092160A20100000
    2-56
    		0.157"1/8"
    		0.126"593502A128000092160A311000092160A20100000
    4-40
    		0.226"22 Ga.
    		0.157"593502A129000092160A315000092160A20300000
    6-32
    		0.281"3/16"
    		0.188"593502A131000092160A319000092160A20500000
    8-32
    		0.321"2 Ga.
    		0.221"593502A132000092160A323000092160A20700000
    10-32
    		0.375"1/4"
    		0.252"593502A133000092160A327000092160A21100000
    1/4"-20
    		0.500"8 mm
    		0.315"593502A134000092160A331000092160A21300000
    5/16"-18
    		0.500"V
    		0.377"593502A135000092160A3080000092160A10500000
    M2 x 0.4 mm2.9 mm1/8"
    		3.2 mm593502A143000092160A34100000———0
    M3 x 0.5 mm5.7 mm22 Ga.
    		3.99 mm593502A144000092160A315000092160A22700000
    M4 x 0.7 mm8.2 mm2 Ga.
    		5.61 mm593502A145000092160A323000092160A22900000
    M5 x 0.8 mm9.5 mm1/4"
    		6.4 mm593502A146000092160A327000092160A23100000
    M6 x 1 mm12.7 mm8 mm
    		8 mm593502A147000092160A327000092160A23300000
    M8 x 1.25 mm12.7 mmV
    		9.58 mm593502A148000092160A3080000092160A10200000
     

    Press-In Threaded Inserts for Plastic

    Image of Product. Bottom orientation. Threaded Inserts. Press-In Threaded Inserts for Plastic.
    The barbed sides keep these inserts in place before a screw is installed. They're faster and easier to install in plastic than heat-set or mold-in inserts. However, they lack the same holding power, so they're best for parts that are rarely disassembled. Install inserts with an arbor press or similar pressure tool.
    Flanged Profile—Flanges on the insert create a load-bearing surface that prevents cracks or deformation in the base material. They also curb overtightening and keep inserts from getting pulled out or through.
    Brass—Conductive and nonmagnetic, these inserts are useful for electrical applications. They resist moisture but aren't as strong as steel inserts.
    Flange
    Thread
    Size
    Installed
    Lg.
    Dia.
    Thick.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Pkg.
    Qty.
    Pkg.
    Standard Profile
     
    Brass
    2-56
    		0.115"——32 Ga.
    		0.116"2593738A110000000
    2-56
    		0.156"——32 Ga.
    		0.116"2593738A12000000
    4-40
    		0.135"——26 Ga.
    		0.147"2593738A13000000
    4-40
    		0.219"——26 Ga.
    		0.147"2593738A14000000
    6-32
    		0.150"——15 Ga.
    		0.180"2593738A15000000
    6-32
    		0.250"——15 Ga.
    		0.180"2593738A16000000
    8-32
    		0.185"——13/64"
    		0.203"1093738A1700000
    8-32
    		0.312"——13/64"
    		0.203"1093738A1800000
    10-24
    		0.225"——15/64"
    		0.234"1093738A2600000
    10-24
    		0.375"——15/64"
    		0.234"1093738A2610000
    10-32
    		0.225"——15/64"
    		0.234"2593738A19000000
    10-32
    		0.375"——15/64"
    		0.234"1093738A21000000
    1/4"-20
    		0.300"——5/16"
    		0.313"1093738A22000000
    1/4"-20
    		0.500"——5/16"
    		0.313"1093738A23000000
    5/16"-18
    		0.562"——25/64"
    		0.393"1093738A25000000
    M2 x 0.4 mm2.9 mm——3 mm
    		3 mm1093738A2620000
    M2 x 0.4 mm3.9 mm——3 mm
    		3 mm1093738A2630000
    M3 x 0.5 mm3.4 mm——3.8 mm
    		3.8 mm1093738A2640000
    M3 x 0.5 mm5.5 mm——3.8 mm
    		3.8 mm1093738A2650000
    M4 x 0.7 mm4.6 mm——5.2 mm
    		5.2 mm1093738A2680000
    M4 x 0.7 mm7.9 mm——5.2 mm
    		5.2 mm1093738A2690000
    M5 x 0.8 mm5.7 mm——5.8 mm
    		5.8 mm1093738A27000000
    M5 x 0.8 mm9.5 mm——5.8 mm
    		5.8 mm1093738A2710000
    M6 x 1 mm7.6 mm——7.9 mm
    		7.9 mm1093738A27200000
    M6 x 1 mm12.7 mm——7.9 mm
    		7.9 mm1093738A27300000
     
    Flanged Profile
     
    Brass
    4-40
    		0.219"0.25"0.03"26 Ga.
    		0.148"1093514A11000000
    6-32
    		0.250"0.296"0.03"15 Ga.
    		0.180"1093514A12000000
    8-32
    		0.312"0.312"0.03"5 Ga.
    		0.205"1093514A13000000
    10-24
    		0.375"0.375"0.03"1 Ga.
    		0.23"1093514A14000000
    10-32
    		0.375"0.375"0.03"1 Ga.
    		0.23"1093514A15000000
    1/4"-20
    		0.500"0.5"0.04"5/16"
    		0.312"593514A16000000
    M3 x 0.5 mm5.6 mm6.4 mm0.76 mm3.8 mm
    		3.8 mm1093514A17000000
    M4 x 0.7 mm7.9 mm7.9 mm0.76 mm5.2 mm
    		5.2 mm1093514A18000000
    M5 x 0.8 mm9.5 mm9.5 mm0.76 mm5.8 mm
    		5.8 mm1093514A19000000
    M6 x 1 mm12.7 mm12.7 mm0.89 mm7.9 mm
    		7.9 mm593514A21000000
     

    Lubricant-Free Seize-Resistant Helical Threaded Inserts

    Image of Product. Front orientation. Threaded Inserts. Lubricant-Free Seize-Resistant Helical Threaded Inserts.
    No lubricant means no mess or particles to contaminate environments such as clean rooms and labs. These inserts are made of Nitronic 60 stainless steel, which prevents sticking or binding that wears out the threads. They're ideal for parts that require frequent disassembly for inspection or repair. Also known as Heli-Coil inserts.
    Installation requires a drill bit, a helical insert tap, and an installation tool.
    Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.
    Inserts
    Through-Hole
    Taps
    Closed-End
    Hole Taps
    Installation
    Tools
    Prong
    Break-Off Tools
    Thread Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Pkg.
    Qty.
    Pkg.
    Each
    Each
    Each
    Each
    Pronged
     
    Nitronic 60 Stainless Steel
    2-56
    		0.086"41 Ga.
    		0.096"596246A0040000091709A09800000091709A40100000090261A14000000092955A1010000000
    2-56
    		0.129"41 Ga.
    		0.096"596246A018000091709A0980000091709A4010000090261A1400000092955A101000000
    4-40
    		0.112"31 Ga.
    		0.120"596246A032000091709A1010000091709A4070000090261A15100000092955A103000000
    4-40
    		0.168"31 Ga.
    		0.120"596246A046000091709A1010000091709A4070000090261A15100000092955A103000000
    4-40
    		0.224"31 Ga.
    		0.120"596246A060000091709A1010000091709A4070000090261A15100000092955A103000000
    4-40
    		0.280"31 Ga.
    		0.120"596246A818000091709A1010000091709A4070000090261A15100000092955A103000000
    6-32
    		0.138"25 Ga.
    		0.150"596246A074000091709A1020000091709A4160000090261A15200000092955A10500000
    6-32
    		0.207"25 Ga.
    		0.150"596246A088000091709A1020000091709A4160000090261A15200000092955A10500000
    6-32
    		0.276"25 Ga.
    		0.150"596246A102000091709A1020000091709A4160000090261A15200000092955A10500000
    8-32
    		0.164"16 Ga.
    		0.177"596246A116000091709A1030000091709A4220000090261A15300000092955A10700000
    8-32
    		0.246"16 Ga.
    		0.177"596246A130000091709A1030000091709A4220000090261A15300000092955A10700000
    8-32
    		0.328"16 Ga.
    		0.177"596246A144000091709A1030000091709A4220000090261A15300000092955A10700000
    10-24
    		0.190"5 Ga.
    		0.206"596246A158000091709A1040000091709A4280000090261A15400000092955A10900000
    10-24
    		0.285"5 Ga.
    		0.206"596246A172000091709A1040000091709A4280000090261A15400000092955A10900000
    10-24
    		0.380"5 Ga.
    		0.206"596246A186000091709A1040000091709A4280000090261A15400000092955A10900000
    10-32
    		0.190"13/64"
    		0.203"596246A200000091709A1510000091709A4310000090261A16100000092955A10900000
    10-32
    		0.285"13/64"
    		0.203"596246A214000091709A1510000091709A4310000090261A16100000092955A10900000
    10-32
    		0.380"13/64"
    		0.203"596246A228000091709A1510000091709A4310000090261A16100000092955A10900000
    10-32
    		0.475"7 Ga.
    		0.204"596246A812000091709A1510000091709A4310000090261A16100000092955A10900000
    1/4"-20
    		0.250"H
    		0.266"596246A242000091709A1050000091709A4370000090261A15500000092955A11100000
    1/4"-20
    		0.375"H
    		0.266"596246A256000091709A1050000091709A4370000090261A15500000092955A11100000
    1/4"-20
    		0.500"H
    		0.266"596246A270000091709A1050000091709A4370000090261A15500000092955A11100000
    5/16"-18
    		0.312"Q
    		0.332"596246A326000091709A1060000091709A4430000090261A15600000092955A113000000
    5/16"-18
    		0.469"Q
    		0.332"596246A340000091709A1060000091709A4430000090261A15600000092955A113000000
    5/16"-18
    		0.625"Q
    		0.332"596246A3540000091709A1060000091709A4430000090261A15600000092955A113000000
    3/8"-16
    		0.375"X
    		0.397"596246A815000091709A1070000091709A4490000090261A15700000092955A115000000
    3/8"-16
    		0.562"X
    		0.397"596246A8110000091709A1070000091709A4490000090261A15700000092955A115000000
    3/8"-16
    		0.750"X
    		0.397"596246A8130000091709A1070000091709A4490000090261A15700000092955A115000000
    1/2"-13
    		0.500"17/32"
    		0.531"596246A8140000091709A1090000091709A4610000090261A15900000092955A119000000
    1/2"-13
    		0.750"17/32"
    		0.531"196246A817000091709A1090000091709A4610000090261A15900000092955A119000000
    1/2"-20
    		0.500"33/64"
    		0.516"596246A8160000091709A1560000091709A4640000090261A16600000092955A127000000
    M2 x 0.4 mm3 mm2.1 mm
    		2.1 mm593914A413000091709A24000000091709A23000000090261A18500000092955A206000000
    M2.5 x 0.45 mm2.5 mm2.65 mm
    		2.65 mm593914A009000091709A6780000091709A5780000090261A18700000092955A204000000
    M2.5 x 0.45 mm3.8 mm2.65 mm
    		2.65 mm593914A026000091709A6780000091709A5780000090261A18700000092955A204000000
    M2.5 x 0.45 mm5 mm2.65 mm
    		2.65 mm593914A0430000091709A6780000091709A5780000090261A18700000092955A204000000
    M3 x 0.5 mm3 mm3.2 mm
    		3.2 mm593914A060000091709A3550000091709A5240000090261A18800000092955A155000000
    M3 x 0.5 mm4.5 mm3.2 mm
    		3.2 mm593914A077000091709A3550000091709A5240000090261A18800000092955A155000000
    M3 x 0.5 mm6 mm3.2 mm
    		3.2 mm593914A094000091709A3550000091709A5240000090261A18800000092955A155000000
    M4 x 0.7 mm4 mm4.25 mm
    		4.25 mm593914A111000091709A3590000091709A5270000090261A19000000092955A160000000
    M4 x 0.7 mm6 mm4.25 mm
    		4.25 mm593914A128000091709A3590000091709A5270000090261A19000000092955A160000000
    M4 x 0.7 mm8 mm4.25 mm
    		4.25 mm593914A145000091709A3590000091709A5270000090261A19000000092955A160000000
    M4 x 0.7 mm12 mm4.25 mm
    		4.25 mm593914A4110000091709A3590000091709A5270000090261A19000000092955A160000000
    M5 x 0.8 mm5 mm5.3 mm
    		5.3 mm593914A162000091709A2010000091709A5300000090261A19100000092955A12900000
    M5 x 0.8 mm7.5 mm5.3 mm
    		5.3 mm593914A179000091709A2010000091709A5300000090261A19100000092955A12900000
    M5 x 0.8 mm10 mm5.3 mm
    		5.3 mm593914A196000091709A2010000091709A5300000090261A19100000092955A12900000
    M6 x 1 mm6 mm6.3 mm
    		6.3 mm593914A213000091709A2020000091709A5330000090261A19200000092955A13100000
    M6 x 1 mm9 mm6.3 mm
    		6.3 mm593914A230000091709A2020000091709A5330000090261A19200000092955A13100000
    M6 x 1 mm12 mm6.3 mm
    		6.3 mm593914A247000091709A2020000091709A5330000090261A19200000092955A13100000
    M8 x 1.25 mm8 mm8.4 mm
    		8.4 mm593914A264000091709A2040000091709A5420000090261A19400000092955A133000000
    M8 x 1.25 mm12 mm8.4 mm
    		8.4 mm593914A281000091709A2040000091709A5420000090261A19400000092955A133000000
    M8 x 1.25 mm16 mm8.4 mm
    		8.4 mm593914A298000091709A2040000091709A5420000090261A19400000092955A133000000
    M10 x 1.5 mm15 mm10.5 mm
    		10.5 mm593914A412000091709A2050000091709A5480000090261A19500000092955A135000000
    M12 x 1.75 mm18 mm12.5 mm
    		12.5 mm193914A414000091709A2060000091709A5570000090261A19600000092955A137000000
     

    Screw-to-Expand Press-In Threaded Inserts For Through Holes in Plastic

    Image of Product. Bottom orientation. Threaded Inserts. Screw-to-Expand Press-In Threaded Inserts For Through Holes in Plastic.
    Press these inserts into a through hole from the underside of your material, and the flange keeps them from going too far. Then, thread in a screw to expand the insert, driving the sharp diamond knurls into the plastic. Install using an arbor press or similar pressure tool. Installed length includes the flange.
    Brass—Conductive and nonmagnetic, these inserts are useful for electrical applications. They resist moisture but aren't as strong as steel inserts.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals. Since they’re lead-free, they can be safely recycled.
    Flange
    Thread Size
    Installed
    Lg.
    Dia.
    Thick.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Pkg.
    Qty.
    Pkg.
    Brass
    2-56
    		0.156"0.187"0.02"1/8"
    		0.125"2592395A31100000
    4-40
    		0.188"0.218"0.02"5/32"
    		0.156"2592395A3150000
    6-32
    		0.250"0.249"0.03"3/16"
    		0.188"2592395A3190000
    8-32
    		0.313"0.28"0.03"7/32"
    		0.219"2592395A3240000
    10-32
    		0.375"0.312"0.04"1/4"
    		0.250"2592395A32800000
    1/4"-20
    		0.500"3/8"0.05"5/16"
    		0.313"2592395A33100000
    M2 x 0.4 mm4 mm4.8 mm0.5 mm3.2 mm
    		3.2 mm2594510A36000000
    M2.5 x 0.45 mm4.8 mm5.6 mm0.55 mm4 mm
    		4 mm2594510A37000000
    M3 x 0.5 mm4.8 mm5.6 mm0.55 mm4 mm
    		4 mm2594510A31000000
    Brass Screw-to-Expand Inserts for Through Holes in Plastic, M3 x 0.5 mm Thread Size
    Pack of 25In stock
    Compatible Products for This Threaded Insert
    M4 x 0.7 mm8 mm7.2 mm0.85 mm5.6 mm
    		5.6 mm1094510A3200000
    M5 x 0.8 mm9.5 mm8 mm1 mm6.4 mm
    		6.4 mm1094510A3300000
    M6 x 1 mm12.7 mm9.5 mm1.3 mm8 mm
    		8 mm1094510A34000000
    M8 x 1.25 mm12.7 mm11 mm1.3 mm9.6 mm
    		9.6 mm1094510A35000000
     
    18-8 Stainless Steel
    2-56
    		0.156"0.187"0.02"1/8"
    		0.125"1093568A11000000
    4-40
    		0.188"0.218"0.02"5/32"
    		0.156"1093568A12000000
    6-32
    		0.250"0.249"0.03"3/16"
    		0.188"1093568A13000000
    8-32
    		0.313"0.28"0.03"7/32"
    		0.219"1093568A14000000
    10-32
    		0.375"0.312"0.04"1/4"
    		0.250"593568A1500000
    1/4"-20
    		0.500"3/8"0.05"5/16"
    		0.313"593568A1600000
    M2 x 0.4 mm4 mm4.8 mm0.43 mm3.2 mm
    		3.2 mm593568A1700000
    M2.5 x 0.45 mm4.8 mm5.5 mm0.51 mm4 mm
    		4 mm593568A1800000
    M3 x 0.5 mm4.8 mm5.5 mm0.51 mm4 mm
    		4 mm593568A1900000
    M4 x 0.7 mm8 mm7.1 mm0.81 mm5.6 mm
    		5.6 mm593568A2100000
    M5 x 0.8 mm9.5 mm7.9 mm1 mm6.4 mm
    		6.4 mm593568A2200000
    M6 x 1 mm12.7 mm9.5 mm1.24 mm8 mm
    		8 mm593568A2300000
    M8 x 1.25 mm12.7 mm11.1 mm1.52 mm9.6 mm
    		9.6 mm593568A24000000
     

    Helical Threaded Insert Assortments with Installation Tools

    Image of Product. Front orientation. Threaded Inserts. Helical Threaded Insert Assortments with Installation Tools.
    Repair damaged threads or create new ones. These convenient assortments include helical inserts, an installation tool for each thread size, a drill bit, and a tap. The inserts are also known as Heli-Coil inserts.
    Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    No. of Inserts
    Included
    Includes
    Thread
    Spacing
    Drill Bit Size
    For Max. Hole Dia.
    Each
    Pronged
     
    18-8 Stainless Steel
    181/2"-13 Thread × 1" Installed Lg. (6 Each)
    1/2"-13 Thread × 1/2" Installed Lg. (6 Each)
    1/2"-13 Thread × 3/4" Installed Lg. (6 Each)
    Drill Bit
    Installation Tool
    Prong Break-Off Tool
    Through-Hole Tap    		Coarse
    		17/32"
    		0.531"91732A937000000
    181/2"-20 Thread × 1" Installed Lg. (6 Each)
    1/2"-20 Thread × 1/2" Installed Lg. (6 Each)
    1/2"-20 Thread × 3/4" Installed Lg. (6 Each)
    Drill Bit
    Installation Tool
    Prong Break-Off Tool
    Through-Hole Tap    		Fine
    		33/64"
    		0.516"91732A939000000
    183/8"-16 Thread × 0.562" Installed Lg. (6 Each)
    3/8"-16 Thread × 3/4" Installed Lg. (6 Each)
    3/8"-16 Thread × 3/8" Installed Lg. (6 Each)
    Drill Bit
    Installation Tool
    Prong Break-Off Tool
    Through-Hole Tap    		Coarse
    		25/64"
    		0.391"91732A92900000
    183/8"-24 Thread × 0.562" Installed Lg. (6 Each)
    3/8"-24 Thread × 3/4" Installed Lg. (6 Each)
    3/8"-24 Thread × 3/8" Installed Lg. (6 Each)
    Drill Bit
    Installation Tool
    Prong Break-Off Tool
    Through-Hole Tap    		Fine
    		25/64"
    		0.391"91732A93100000
    187/16"-14 Thread × 0.438" Installed Lg. (6 Each)
    7/16"-14 Thread × 0.656" Installed Lg. (6 Each)
    7/16"-14 Thread × 7/8" Installed Lg. (6 Each)
    Drill Bit
    Installation Tool
    Prong Break-Off Tool
    Through-Hole Tap    		Coarse
    		29/64"
    		0.453"91732A93300000
    187/16"-20 Thread × 0.438" Installed Lg. (6 Each)
    7/16"-20 Thread × 0.656" Installed Lg. (6 Each)
    7/16"-20 Thread × 7/8" Installed Lg. (6 Each)
    Drill Bit
    Installation Tool
    Prong Break-Off Tool
    Through-Hole Tap    		Fine
    		29/64"
    		0.453"91732A93500000
    18Drill Bit
    Installation Tool
    M4×0.7 mm Thread × 4 mm Installed Lg. (6 Each)
    M4×0.7 mm Thread × 6 mm Installed Lg. (6 Each)
    M4×0.7 mm Thread × 8 mm Installed Lg. (6 Each)
    Prong Break-Off Tool
    Through-Hole Tap    		Coarse
    		11/64"
    		0.172"91732A94300000
    18Drill Bit
    Installation Tool
    M5×0.8 mm Thread × 10 mm Installed Lg. (6 Each)
    M5×0.8 mm Thread × 5 mm Installed Lg. (6 Each)
    M5×0.8 mm Thread × 7.5 mm Installed Lg. (6 Each)
    Prong Break-Off Tool
    Through-Hole Tap    		Coarse
    		13/64"
    		0.203"91732A94500000
    18Drill Bit
    Installation Tool
    M6×1 mm Thread × 12 mm Installed Lg. (6 Each)
    M6×1 mm Thread × 6 mm Installed Lg. (6 Each)
    M6×1 mm Thread × 9 mm Installed Lg. (6 Each)
    Prong Break-Off Tool
    Through-Hole Tap    		Coarse
    		1/4"
    		0.250"91732A94700000
    18Drill Bit
    Installation Tool
    M7×1 mm Thread × 10.5 mm Installed Lg. (6 Each)
    M7×1 mm Thread × 14 mm Installed Lg. (6 Each)
    M7×1 mm Thread × 7 mm Installed Lg. (6 Each)
    Through-Hole Tap    		Coarse
    		9/32"
    		0.281"91732A94900000
    18Drill Bit
    Installation Tool
    M8×1.25 mm Thread × 12 mm Installed Lg. (6 Each)
    M8×1.25 mm Thread × 16 mm Installed Lg. (6 Each)
    M8×1.25 mm Thread × 8 mm Installed Lg. (6 Each)
    Through-Hole Tap    		Coarse
    		21/64"
    		0.328"91732A95100000
    18Drill Bit
    Installation Tool
    M10×1.5 mm Thread × 10 mm Installed Lg. (6 Each)
    M10×1.5 mm Thread × 15 mm Installed Lg. (6 Each)
    M10×1.5 mm Thread × 20 mm Installed Lg. (6 Each)
    Prong Break-Off Tool
    Through-Hole Tap    		Coarse
    		13/32"
    		0.406"91732A95500000
    18Drill Bit
    Installation Tool
    M12×1.75 mm Thread × 12 mm Installed Lg. (6 Each)
    M12×1.75 mm Thread × 18 mm Installed Lg. (6 Each)
    M12×1.75 mm Thread × 24 mm Installed Lg. (6 Each)
    Prong Break-Off Tool
    Through-Hole Tap    		Coarse
    		31/64"
    		0.484"91732A96100000
    18Drill Bit
    Installation Tool
    M10×1 mm Thread × 10 mm Installed Lg. (6 Each)
    M10×1 mm Thread × 15 mm Installed Lg. (6 Each)
    M10×1 mm Thread × 20 mm Installed Lg. (6 Each)
    Prong Break-Off Tool
    Through-Hole Tap    		Fine
    		13/32"
    		0.406"91732A95900000
    18Drill Bit
    Installation Tool
    M12×1.25 mm Thread × 12 mm Installed Lg. (6 Each)
    M12×1.25 mm Thread × 18 mm Installed Lg. (6 Each)
    M12×1.25 mm Thread × 24 mm Installed Lg. (6 Each)
    Prong Break-Off Tool
    Through-Hole Tap    		Extra Fine
    		31/64"
    		0.484"91732A96300000
    361/4"-20 Thread × 1/2" Installed Lg. (12 Each)
    1/4"-20 Thread × 1/4" Installed Lg. (12 Each)
    1/4"-20 Thread × 3/8" Installed Lg. (12 Each)
    Drill Bit
    Installation Tool
    Prong Break-Off Tool
    Through-Hole Tap    		Coarse
    		17/64"
    		0.266"91732A92100000
    361/4"-28 Thread × 1/2" Installed Lg. (12 Each)
    1/4"-28 Thread × 1/4" Installed Lg. (12 Each)
    1/4"-28 Thread × 3/8" Installed Lg. (12 Each)
    Drill Bit
    Installation Tool
    Prong Break-Off Tool
    Through-Hole Tap    		Fine
    		17/64"
    		0.266"91732A92300000
    364-40 Thread × 0.112" Installed Lg. (12 Each)
    4-40 Thread × 0.168" Installed Lg. (12 Each)
    4-40 Thread × 0.224" Installed Lg. (12 Each)
    Drill Bit
    Installation Tool
    Prong Break-Off Tool
    Through-Hole Tap    		Coarse
    		31 Ga.
    		0.120"91732A90100000
    365-40 Thread × 0.188" Installed Lg. (12 Each)
    5-40 Thread × 1/4" Installed Lg. (12 Each)
    5-40 Thread × 1/8" Installed Lg. (12 Each)
    Drill Bit
    Installation Tool
    Prong Break-Off Tool
    Through-Hole Tap    		Coarse
    		29 Ga.
    		0.136"91732A903000000
    365/16"-18 Thread × 0.312" Installed Lg. (12 Each)
    5/16"-18 Thread × 0.469" Installed Lg. (12 Each)
    5/16"-18 Thread × 5/8" Installed Lg. (12 Each)
    Drill Bit
    Installation Tool
    Prong Break-Off Tool
    Through-Hole Tap    		Coarse
    		21/64"
    		0.328"91732A92500000
    365/16"-24 Thread × 0.312" Installed Lg. (12 Each)
    5/16"-24 Thread × 0.469" Installed Lg. (12 Each)
    5/16"-24 Thread × 5/8" Installed Lg. (12 Each)
    Drill Bit
    Installation Tool
    Prong Break-Off Tool
    Through-Hole Tap    		Fine
    		21/64"
    		0.328"91732A92700000
    366-32 Thread × 0.138" Installed Lg. (12 Each)
    6-32 Thread × 0.207" Installed Lg. (12 Each)
    6-32 Thread × 0.276" Installed Lg. (12 Each)
    Drill Bit
    Installation Tool
    Prong Break-Off Tool
    Through-Hole Tap    		Coarse
    		25 Ga.
    		0.150"91732A90500000
    366-40 Thread × 0.138" Installed Lg. (12 Each)
    6-40 Thread × 0.207" Installed Lg. (12 Each)
    6-40 Thread × 0.276" Installed Lg. (12 Each)
    Drill Bit
    Installation Tool
    Prong Break-Off Tool
    Through-Hole Tap    		Fine
    		25 Ga.
    		0.150"91732A907000000
    368-32 Thread × 0.164" Installed Lg. (12 Each)
    8-32 Thread × 0.246" Installed Lg. (12 Each)
    8-32 Thread × 0.328" Installed Lg. (12 Each)
    Drill Bit
    Installation Tool
    Prong Break-Off Tool
    Through-Hole Tap    		Coarse
    		11/64"
    		0.172"91732A90900000
    368-36 Thread × 0.164" Installed Lg. (12 Each)
    8-36 Thread × 0.246" Installed Lg. (12 Each)
    8-36 Thread × 0.328" Installed Lg. (12 Each)
    Drill Bit
    Installation Tool
    Prong Break-Off Tool
    Through-Hole Tap    		Fine
    		17 Ga.
    		0.173"91732A911000000
    3610-24 Thread × 0.19" Installed Lg. (12 Each)
    10-24 Thread × 0.285" Installed Lg. (12 Each)
    10-24 Thread × 0.38" Installed Lg. (12 Each)
    Drill Bit
    Installation Tool
    Prong Break-Off Tool
    Through-Hole Tap    		Coarse
    		13/64"
    		0.203"91732A91300000
    3610-32 Thread × 0.19" Installed Lg. (12 Each)
    10-32 Thread × 0.285" Installed Lg. (12 Each)
    10-32 Thread × 0.38" Installed Lg. (12 Each)
    Drill Bit
    Installation Tool
    Prong Break-Off Tool
    Through-Hole Tap    		Fine
    		13/64"
    		0.203"91732A91500000
    3612-24 Thread × 0.216" Installed Lg. (12 Each)
    12-24 Thread × 0.328" Installed Lg. (12 Each)
    12-24 Thread × 0.432" Installed Lg. (12 Each)
    Drill Bit
    Installation Tool
    Prong Break-Off Tool
    Through-Hole Tap    		Coarse
    		15/64"
    		0.234"91732A91700000
    36Drill Bit
    Installation Tool
    M3×0.5 mm Thread × 3 mm Installed Lg. (12 Each)
    M3×0.5 mm Thread × 4.5 mm Installed Lg. (12 Each)
    M3×0.5 mm Thread × 6 mm Installed Lg. (12 Each)
    Through-Hole Tap    		Coarse
    		1/8"
    		0.125"91732A941000000
    48Drill Bits
    Installation Tools
    M5×0.8 mm Thread × 7.5 mm Installed Lg. (12 Each)
    M6×1 mm Thread × 9 mm Installed Lg. (12 Each)
    M8×1.25 mm Thread × 12 mm Installed Lg. (12 Each)
    M10×1.5 mm Thread × 15 mm Installed Lg. (12 Each)
    Through-Hole Taps    		Coarse
    		13/64"
    1/4"
    21/64"
    13/32"
    		0.203"
    0.250"
    0.328"
    0.406"    		90285A131000000
    541/2"-13 Thread × 3/4" Installed Lg. (6 Each)
    1/4"-20 Thread × 3/8" Installed Lg. (12 Each)
    3/8"-16 Thread × 0.562" Installed Lg. (12 Each)
    5/16"-18 Thread × 0.469" Installed Lg. (12 Each)
    5/8"-11 Thread × 15/16" Installed Lg. (6 Each)
    7/16"-14 Thread × 0.656" Installed Lg. (6 Each)
    Drill Bits
    Installation Tools
    Through-Hole Taps    		Coarse
    		17/64"
    21/64"
    25/64"
    29/64"
    17/32"
    21/32"
    		0.266"
    0.328"
    0.391"
    0.453"
    0.531"
    0.656"    		90285A121000000
    601/2"-20 Thread × 3/4" Installed Lg. (6 Each)
    1/4"-28 Thread × 3/8" Installed Lg. (12 Each)
    3/8"-24 Thread × 0.562" Installed Lg. (12 Each)
    5/16"-24 Thread × 0.469" Installed Lg. (12 Each)
    7/16"-20 Thread × 0.656" Installed Lg. (6 Each)
    10-32 Thread × 0.285" Installed Lg. (12 Each)
    Drill Bits
    Installation Tools
    Through-Hole Taps    		Fine
    		13/64"
    17/64"
    21/64"
    25/64"
    29/64"
    33/64"
    		0.203"
    0.266"
    0.328"
    0.391"
    0.453"
    0.516"    		90285A124000000
    2881-64 Thread × 0.11" Installed Lg. (24 Inserts and 24 Screw-Locking Inserts)
    2-56 Thread × 0.129" Installed Lg. (24 Inserts and 24 Screw-Locking Inserts)
    3-48 Thread × 0.148" Installed Lg. (24 Inserts and 24 Screw-Locking Inserts)
    4-40 Thread × 0.168" Installed Lg. (24 Inserts and 24 Screw-Locking Inserts)
    6-32 Thread × 0.207" Installed Lg. (24 Inserts and 24 Screw-Locking Inserts)
    8-32 Thread × 0.246" Installed Lg. (24 Inserts and 24 Screw-Locking Inserts)
    Drill Bits
    Installation Tools
    Through-Hole Taps    		Coarse
    		5/64"
    3/32"
    36 Ga.
    31 Ga.
    26 Ga.
    17 Ga.
    		0.078"
    0.094"
    0.107"
    0.120"
    0.147"
    0.173"    		90285A134000000
     

    Screw-Locking Seize-Resistant Helical Threaded Inserts

    Image of Product. Bottom orientation. Threaded Inserts. Screw-Locking Seize-Resistant Helical Threaded Inserts.
    Screws won't get stuck or come loose with these inserts. A dry film on the surface lubricates fasteners during insertion to prevent sticking and binding. Once installed, the irregularly shaped threads tightly grip screws to keep them in place under vibration. Also known as Heli-Coil inserts.
    Installation requires a drill bit, a helical insert tap, and an installation tool.
    Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.
    Dry-Film-Lubricated 18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Inserts
    Through-Hole
    Taps
    Closed-End
    Hole Taps
    Installation
    Tools
    Prong
    Break-Off Tools
    Thread Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Each
    Each
    Each
    Each
    Pronged
     
    Dry-Film-Lubricated 18-8 Stainless Steel
    2-56
    		0.086"41 Ga.
    		0.096"MS21209C0210L, NASM21209591000A4010000091709A09800000091709A40100000090261A14000000092955A1010000000
    2-56
    		0.129"41 Ga.
    		0.096"MS21209C0215L, NASM21209591000A404000091709A0980000091709A4010000090261A1400000092955A101000000
    2-56
    		0.172"41 Ga.
    		0.096"MS21209C0220L, NASM21209591000A407000091709A0980000091709A4010000090261A1400000092955A101000000
    4-40
    		0.112"31 Ga.
    		0.120"MS21209C0410L, NASM21209591000A411000091709A1010000091709A4070000090261A15100000092955A103000000
    4-40
    		0.168"31 Ga.
    		0.120"MS21209C0415L, NASM21209591000A415000091709A1010000091709A4070000090261A15100000092955A103000000
    4-40
    		0.224"31 Ga.
    		0.120"MS21209C0420L, NASM21209591000A419000091709A1010000091709A4070000090261A15100000092955A103000000
    6-32
    		0.138"25 Ga.
    		0.150"MS21209C0610L, NASM21209591000A422000091709A1020000091709A4160000090261A15200000092955A10500000
    6-32
    		0.207"25 Ga.
    		0.150"MS21209C0615L, NASM21209591000A425000091709A1020000091709A4160000090261A15200000092955A10500000
    6-32
    		0.276"25 Ga.
    		0.150"MS21209C0620L, NASM21209591000A429000091709A1020000091709A4160000090261A15200000092955A10500000
    10-24
    		0.285"5 Ga.
    		0.206"MS21209C1-15L, NASM21209591000A436000091709A1040000091709A4280000090261A15400000092955A10900000
    10-32
    		0.190"13/64"
    		0.203"MS21209F1-10L, NASM21209591000A463000091709A1510000091709A4310000090261A16100000092955A10900000
    10-32
    		0.285"13/64"
    		0.203"MS21209F1-15L, NASM21209591000A466000091709A1510000091709A4310000090261A16100000092955A10900000
    10-32
    		0.380"13/64"
    		0.203"MS21209F1-20L, NASM21209591000A469000091709A1510000091709A4310000090261A16100000092955A10900000
    1/4"-20
    		0.375"H
    		0.266"MS21209C4-15L, NASM21209591000A443000091709A1050000091709A4370000090261A15500000092955A11100000
    1/4"-20
    		0.500"H
    		0.266"MS21209C4-20L, NASM21209191000A446000091709A1050000091709A4370000090261A15500000092955A11100000
    5/16"-18
    		0.469"Q
    		0.332"MS21209C5-15L, NASM21209191000A454000091709A1060000091709A4430000090261A15600000092955A113000000
    5/16"-18
    		0.625"Q
    		0.332"MS21209C5-20L, NASM21209191000A458000091709A1060000091709A4430000090261A15600000092955A113000000
    M2.5 x 0.45 mm3.8 mm37 Ga.
    		0.104"DIN 8140, SAE MA3330-151191000A502000091709A6780000091709A5780000090261A18700000092955A204000000
    M4 x 0.7 mm4 mm19 Ga.
    		0.166"DIN 8140, SAE MA3330-104191000A522000091709A3590000091709A5270000090261A19000000092955A160000000
    M4 x 0.7 mm6 mm19 Ga.
    		0.166"DIN 8140, SAE MA3330-154591000A525000091709A3590000091709A5270000090261A19000000092955A160000000
    M4 x 0.7 mm8 mm19 Ga.
    		0.166"DIN 8140, SAE MA3330-204591000A527000091709A3590000091709A5270000090261A19000000092955A160000000
    M5 x 0.8 mm5 mm5.3 mm
    		5.3 mmSAE MA3330-105191000A533000091709A2010000091709A5300000090261A19100000092955A12900000
    M5 x 0.8 mm7.5 mm5.3 mm
    		5.3 mmDIN 8140, SAE MA3330-155191000A536000091709A2010000091709A5300000090261A19100000092955A12900000
    M5 x 0.8 mm10 mm5.3 mm
    		5.3 mmDIN 8140, SAE MA3330-205191000A530000091709A2010000091709A5300000090261A19100000092955A12900000
    M6 x 1 mm6 mm6.3 mm
    		6.3 mmSAE MA3330-106191000A541000091709A2020000091709A5330000090261A19200000092955A13100000
    M6 x 1 mm9 mm6.3 mm
    		6.3 mmDIN 8140, SAE MA3330-156591000A544000091709A2020000091709A5330000090261A19200000092955A13100000
    M6 x 1 mm12 mm6.3 mm
    		6.3 mmDIN 8140, SAE MA3330-206191000A547000091709A2020000091709A5330000090261A19200000092955A13100000
    M8 x 1.25 mm8 mm8.4 mm
    		8.4 mmDIN 8140, SAE MA3330-109191000A561000091709A2040000091709A5420000090261A19400000092955A133000000
    M8 x 1.25 mm12 mm8.4 mm
    		8.4 mmDIN 8140, SAE MA3330-159591000A564000091709A2040000091709A5420000090261A19400000092955A133000000
     

    Closed-End Mold-In Threaded Inserts for Plastic

    Image of Product. Bottom orientation. Threaded Inserts. Closed-End Mold-In Threaded Inserts for Plastic.
    The closed end prevents molten plastic from seeping in and clogging the threads. Designed for injection molding, these inserts become inseparable from your part. They form a stronger bond than heat-set and press-fit inserts and last longer than threads cut directly into material. Unlike heat-set inserts, these work in a wide variety of plastics, including thermoset plastics that can’t be reformed.
    To install, position these inserts in your mold cavity with a core pin (not included).
    Brass—Conductive and nonmagnetic, these inserts are useful for electrical applications. They resist moisture but aren't as strong as steel inserts.
    Lightweight Aluminum—At one-third the weight of steel or brass, use these inserts in robotics, aerospace parts, and other applications with strict weight limits. They also resist rust about as well as stainless steel but aren't as strong. Since inserts are lead-free, they can be safely recycled.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals. Since they’re lead-free, they can be safely recycled.
    Thread Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    For Core
    Pin Dia.
    Pkg.
    Qty.
    Pkg.
    Brass
    2-56
    		0.156"9/64"
    		0.142"0.067"257588N3200000
    2-56
    		0.219"9/64"
    		0.142"0.067"257588N330000
    4-40
    		0.205"18 Ga.
    		0.171"0.089"107588N340000
    4-40
    		0.281"18 Ga.
    		0.171"0.089"107588N350000
    4-40
    		0.344"18 Ga.
    		0.171"0.089"107588N360000
    6-32
    		0.250"7 Ga.
    		0.202"0.104"257588N370000
    6-32
    		0.344"7 Ga.
    		0.202"0.104"257588N380000
    6-32
    		0.469"7 Ga.
    		0.202"0.104"107588N390000
    8-32
    		0.469"2 Ga.
    		0.226"0.130"107588N410000
    10-24
    		0.438"F
    		0.259"0.145"107588N420000
    10-24
    		0.531"F
    		0.259"0.145"107588N430000
    10-24
    		0.750"F
    		0.259"0.145"57588N440000
    10-32
    		0.281"F
    		0.259"0.156"107588N450000
    10-32
    		0.438"F
    		0.259"0.156"107588N460000
    10-32
    		0.531"F
    		0.259"0.156"107588N470000
    1/4"-20
    		0.531"O
    		0.321"0.196"107588N480000
    1/4"-20
    		0.625"O
    		0.321"0.196"107588N490000
    5/16"-18
    		0.719"Y
    		0.404"0.252"57588N510000
    3/8"-16
    		0.812"29/64"
    		0.466"0.307"57588N520000
    M2 x 0.4 mm4.75 mm30 Ga.
    		3.38 mm1.700 mm257588N110000
    M3 x 0.5 mm5.21 mm18 Ga.
    		4.34 mm2.500 mm257588N530000
    M3 x 0.5 mm8.74 mm18 Ga.
    		4.34 mm2.500 mm107588N540000
    M4 x 0.7 mm11.91 mm2 Ga.
    		5.74 mm3.200 mm57588N550000
    M5 x 0.8 mm13.49 mmF
    		6.57 mm4.300 mm107588N560000
    M6 x 1 mm13.49 mmO
    		8.15 mm4.900 mm107588N570000
    M6 x 1 mm15.88 mmO
    		8.15 mm4.900 mm107588N580000
     
    Lightweight Aluminum
    8-32
    		0.380"I
    		0.272"0.136"257588N140000
    10-24
    		0.459"N
    		0.309"0.148"107588N150000
    1/4"-20
    		0.610"23/64"
    		0.367"0.200"107588N160000
    5/16"-18
    		0.697"29/64"
    		0.463"0.257"57588N170000
    M4 x 0.7 mm9.65 mmI
    		6.9 mm3.200 mm257588N180000
    M5 x 0.8 mm11.65 mmN
    		7.85 mm4.300 mm107588N190000
    M6 x 1 mm15.5 mm23/64"
    		9.33 mm4.900 mm107588N210000
    M8 x 1.25 mm17.7 mm29/64"
    		11.75 mm6.800 mm57588N220000
     
    18-8 Stainless Steel
    2-56
    		0.156"9/64"
    		0.142"0.072"107588N820000
    4-40
    		0.205"18 Ga.
    		0.171"0.089"107588N830000
    6-32
    		0.250"7 Ga.
    		0.202"0.110"107588N840000
    8-32
    		0.250"2 Ga.
    		0.226"0.136"107588N850000
    10-24
    		0.531"F
    		0.259"0.154"107588N860000
    10-32
    		0.281"F
    		0.259"0.161"107588N870000
    1/4"-20
    		0.344"O
    		0.321"0.204"107588N8800000
    5/16"-18
    		0.594"Y
    		0.404"0.261"57588N890000
    3/8"-16
    		0.500"29/64"
    		0.466"0.318"57588N910000
    M2.5 x 0.45 mm4.78 mm18 Ga.
    		4.34 mm2.100 mm107588N920000
    M3 x 0.5 mm5.21 mm18 Ga.
    		4.34 mm2.100 mm107588N930000
    M3.5 x 0.6 mm6.35 mm7 Ga.
    		5.13 mm3.000 mm107588N940000
    M4 x 0.7 mm6.35 mm2 Ga.
    		5.74 mm3.400 mm107588N950000
    M5 x 0.8 mm7.13 mmF
    		6.57 mm4.300 mm107588N960000
    M6 x 1 mm8.73 mmO
    		8.15 mm5.100 mm107588N9700000
    M8 x 1.25 mm11.13 mmY
    		10.26 mm6.800 mm57588N980000
     

    Key-Locking Threaded Insert Assortments with Installation Tools

    Image of Product. Front orientation. Threaded Inserts. Key-Locking Threaded Insert Assortments with Installation Tools.
    What you need to add or repair a range of thread sizes in soft metal, such as aluminum. These assortments include multiple key-locking inserts of each size and an installation tool. They're comparable to Keensert inserts.
    Standard Wall—Stronger than thin-wall inserts, these are your go-to choice for threading most holes.
    Thin Wall—Use these inserts near the edge of workpieces or wherever you only have space for a small hole. They're also lighter than standard and extra-thick wall inserts for applications with strict weight limitations.
    Black Phosphate-Coated Steel—These inserts resist occasional moisture.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    For Tap
    No. of Inserts
    Included
    Includes
    Thread Spacing
    Thread Size
    Thread Pitch,
    mm
    Drill Bit Size
    For Max. Hole Dia.
    Each
    Standard Wall
     
    Black Phosphate-Coated Steel
    771"-12 Thread × 1 3/8" Installed Lg. (2 Each)
    1/2"-20 Thread × 5/8" Installed Lg. (6 Each)
    1/4"-28 Thread × 3/8" Installed Lg. (20 Each)
    3/4"-16 Thread × 1 1/8" Installed Lg. (3 Each)
    3/8"-24 Thread × 1/2" Installed Lg. (10 Each)
    5/16"-24 Thread × 0.438" Installed Lg. (15 Each)
    5/8"-18 Thread × 7/8" Installed Lg. (3 Each)
    7/16"-20 Thread × 5/8" Installed Lg. (10 Each)
    7/8"-14 Thread × 1 1/4" Installed Lg. (3 Each)
    9/16"-18 Thread × 0.813" Installed Lg. (5 Each)
    Installation Tool    		Fine
    		7/16"-14
    1/2"-13
    9/16"-12
    5/8"-11
    3/4"-16
    7/8"-14
    1 1/8"-12
    1 1/4"-12
    1 3/8"-12
    		—29/64"
    33/64"
    37/64"
    45/64"
    53/64"
    1 1/16"
    1 3/16"
    1 5/16"
    X
    		0.397"
    0.453"
    0.516"
    0.578"
    0.703"
    0.828"
    1.063"
    1.186"
    1.313"    		90284A2150000000
    771"-8 Thread × 1 3/8" Installed Lg. (2 Each)
    1/2"-13 Thread × 5/8" Installed Lg. (6 Each)
    1/4"-20 Thread × 3/8" Installed Lg. (20 Each)
    3/4"-10 Thread × 1 1/8" Installed Lg. (3 Each)
    3/8"-16 Thread × 1/2" Installed Lg. (10 Each)
    5/16"-18 Thread × 0.438" Installed Lg. (15 Each)
    5/8"-11 Thread × 7/8" Installed Lg. (3 Each)
    7/16"-14 Thread × 5/8" Installed Lg. (10 Each)
    7/8"-9 Thread × 1 1/4" Installed Lg. (3 Each)
    9/16"-12 Thread × 0.813" Installed Lg. (5 Each)
    Installation Tool    		Coarse
    		7/16"-14
    1/2"-13
    9/16"-12
    5/8"-11
    3/4"-16
    7/8"-14
    1 1/8"-12
    1 1/4"-12
    1 3/8"-12
    		—29/64"
    33/64"
    37/64"
    45/64"
    53/64"
    1 1/16"
    1 3/16"
    1 5/16"
    X
    		0.397"
    0.453"
    0.516"
    0.578"
    0.703"
    0.828"
    1.063"
    1.186"
    1.313"    		90284A211000000
     
    18-8 Stainless Steel
    771"-12 Thread × 1 3/8" Installed Lg. (2 Each)
    1/2"-20 Thread × 5/8" Installed Lg. (6 Each)
    1/4"-28 Thread × 3/8" Installed Lg. (20 Each)
    3/4"-16 Thread × 1 1/8" Installed Lg. (3 Each)
    3/8"-24 Thread × 1/2" Installed Lg. (10 Each)
    5/16"-24 Thread × 0.438" Installed Lg. (15 Each)
    5/8"-18 Thread × 7/8" Installed Lg. (3 Each)
    7/16"-20 Thread × 5/8" Installed Lg. (10 Each)
    7/8"-14 Thread × 1 1/4" Installed Lg. (3 Each)
    9/16"-18 Thread × 0.813" Installed Lg. (5 Each)
    Installation Tool    		Fine
    		7/16"-14
    1/2"-13
    9/16"-12
    5/8"-11
    3/4"-16
    7/8"-14
    1 1/8"-12
    1 1/4"-12
    1 3/8"-12
    		—29/64"
    33/64"
    37/64"
    45/64"
    53/64"
    1 1/16"
    1 3/16"
    1 5/16"
    X
    		0.397"
    0.453"
    0.516"
    0.578"
    0.703"
    0.828"
    1.063"
    1.186"
    1.313"    		90284A415000000
    771"-8 Thread × 1 3/8" Installed Lg. (2 Each)
    1/2"-13 Thread × 5/8" Installed Lg. (6 Each)
    1/4"-20 Thread × 3/8" Installed Lg. (20 Each)
    3/4"-10 Thread × 1 1/8" Installed Lg. (3 Each)
    3/8"-16 Thread × 1/2" Installed Lg. (10 Each)
    5/16"-18 Thread × 0.438" Installed Lg. (15 Each)
    5/8"-11 Thread × 7/8" Installed Lg. (3 Each)
    7/16"-14 Thread × 5/8" Installed Lg. (10 Each)
    7/8"-9 Thread × 1 1/4" Installed Lg. (3 Each)
    9/16"-12 Thread × 0.813" Installed Lg. (5 Each)
    Installation Tool    		Coarse
    		7/16"-14
    1/2"-13
    9/16"-12
    5/8"-11
    3/4"-16
    7/8"-14
    1 1/8"-12
    1 1/4"-12
    1 3/8"-12
    		—29/64"
    33/64"
    37/64"
    45/64"
    53/64"
    1 1/16"
    1 3/16"
    1 5/16"
    X
    		0.397"
    0.453"
    0.516"
    0.578"
    0.703"
    0.828"
    1.063"
    1.186"
    1.313"    		90284A411000000
     
    Thin Wall
     
    Black Phosphate-Coated Steel
    811/2"-13 Thread × 5/8" Installed Lg. (6 Each)
    1/4"-20 Thread × 3/8" Installed Lg. (20 Each)
    3/8"-16 Thread × 1/2" Installed Lg. (10 Each)
    5/16"-18 Thread × 0.438" Installed Lg. (15 Each)
    7/16"-14 Thread × 0.563" Installed Lg. (10 Each)
    10-24 Thread × 0.313" Installed Lg. (20 Each)
    Installation Tool    		Coarse
    		5/16"-18
    3/8"-16
    7/16"-14
    1/2"-13
    9/16"-12
    5/8"-11
    		—29/64"
    33/64"
    37/64"
    I
    Q
    X
    		0.272"
    0.332"
    0.397"
    0.453"
    0.516"
    0.578"    		90284A200000000
    811/2"-20 Thread × 5/8" Installed Lg. (6 Each)
    1/4"-28 Thread × 3/8" Installed Lg. (20 Each)
    3/8"-24 Thread × 1/2" Installed Lg. (10 Each)
    5/16"-24 Thread × 0.438" Installed Lg. (15 Each)
    7/16"-20 Thread × 0.563" Installed Lg. (10 Each)
    10-32 Thread × 0.313" Installed Lg. (20 Each)
    Installation Tool    		Fine
    		5/16"-18
    3/8"-16
    7/16"-14
    1/2"-13
    9/16"-12
    5/8"-11
    		—29/64"
    33/64"
    37/64"
    I
    Q
    X
    		0.272"
    0.332"
    0.397"
    0.453"
    0.516"
    0.578"    		90284A300000000
    82Installation Tool
    M6×1 mm Thread × 10 mm Installed Lg. (20 Each)
    M8×1 mm Thread × 12 mm Installed Lg. (15 Each)
    M8×1.25 mm Thread × 12 mm Installed Lg. (15 Each)
    M10×1.25 mm Thread × 14 mm Installed Lg. (10 Each)
    M10×1.5 mm Thread × 14 mm Installed Lg. (10 Each)
    M12×1.25 mm Thread × 16 mm Installed Lg. (6 Each)
    M12×1.75 mm Thread × 16 mm Installed Lg. (6 Each)    		Coarse, Fine, Extra Fine
    		M10
    M12
    M14
    M16
    		1.25
    1.5    		8.8 mm
    10.8 mm
    12.8 mm
    14.75 mm
    		8.8 mm
    10.8 mm
    12.8 mm
    14.75 mm    		90284A311000000
     
    18-8 Stainless Steel
    811/2"-13 Thread × 5/8" Installed Lg. (6 Each)
    1/4"-20 Thread × 3/8" Installed Lg. (20 Each)
    3/8"-16 Thread × 1/2" Installed Lg. (10 Each)
    5/16"-18 Thread × 0.438" Installed Lg. (15 Each)
    7/16"-14 Thread × 0.563" Installed Lg. (10 Each)
    10-24 Thread × 0.313" Installed Lg. (20 Each)
    Installation Tool    		Coarse
    		5/16"-18
    3/8"-16
    7/16"-14
    1/2"-13
    9/16"-12
    5/8"-11
    		—29/64"
    33/64"
    37/64"
    I
    Q
    X
    		0.272"
    0.332"
    0.397"
    0.453"
    0.516"
    0.578"    		90284A400000000
    811/2"-20 Thread × 5/8" Installed Lg. (6 Each)
    1/4"-28 Thread × 3/8" Installed Lg. (20 Each)
    3/8"-24 Thread × 1/2" Installed Lg. (10 Each)
    5/16"-24 Thread × 0.438" Installed Lg. (15 Each)
    7/16"-20 Thread × 0.563" Installed Lg. (10 Each)
    10-32 Thread × 0.313" Installed Lg. (20 Each)
    Installation Tool    		Fine
    		5/16"-18
    3/8"-16
    7/16"-14
    1/2"-13
    9/16"-12
    5/8"-11
    		—29/64"
    33/64"
    37/64"
    I
    Q
    X
    		0.272"
    0.332"
    0.397"
    0.453"
    0.516"
    0.578"    		90284A500000000
    82Installation Tool
    M6×1 mm Thread × 10 mm Installed Lg. (20 Each)
    M8×1 mm Thread × 12 mm Installed Lg. (15 Each)
    M8×1.25 mm Thread × 12 mm Installed Lg. (15 Each)
    M10×1.25 mm Thread × 14 mm Installed Lg. (10 Each)
    M10×1.5 mm Thread × 14 mm Installed Lg. (10 Each)
    M12×1.25 mm Thread × 16 mm Installed Lg. (6 Each)
    M12×1.75 mm Thread × 16 mm Installed Lg. (6 Each)    		Coarse, Fine, Extra Fine
    		M10
    M12
    M14
    M16
    		1.25
    1.5    		8.8 mm
    10.8 mm
    12.8 mm
    14.75 mm
    		8.8 mm
    10.8 mm
    12.8 mm
    14.75 mm    		90284A511000000
     

    Strong-Grip Screw-to-Expand Press-In Threaded Inserts for Plastic

    Image of Product. Bottom orientation. Threaded Inserts. Strong-Grip Screw-to-Expand Press-In Threaded Inserts for Plastic.
    For a more secure hold than other screw-to-expand inserts, fins cut into the surrounding plastic. Press or hammer these inserts into a drilled hole and then install a screw to expand the fins.
    Brass—Conductive and nonmagnetic, these inserts are useful for electrical applications. They resist moisture but aren't as strong as steel inserts.
    Thread Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    No. of
    Fins
    Pkg.
    Qty.
    Pkg.
    Standard Profile
     
    Brass
    4-40
    		0.188"5 Ga.
    		0.206"12590363A101000000
    4-40
    		0.375"5 Ga.
    		0.206"22590363A10200000
    6-32
    		0.188"5 Ga.
    		0.206"12590363A0170000
    6-32
    		0.375"5 Ga.
    		0.206"22590363A04400000
    8-32
    		0.188"15/64"
    		0.234"12590363A0180000
    8-32
    		0.375"15/64"
    		0.234"22590363A04500000
    10-24
    		0.375"G
    		0.261"22590363A04700000
    10-32
    		0.188"G
    		0.261"12590363A01900000
    10-32
    		0.375"G
    		0.261"22590363A04600000
    10-32
    		0.563"11/32"
    		0.344"31090363A0290000
    1/4"-20
    		0.375"21/64"
    		0.328"22590363A02800000
    1/4"-20
    		0.563"13/32"
    		0.406"31090363A03400000
    5/16"-18
    		0.563"15/32"
    		0.469"3590363A0350000
    M2 x 0.4 mm4 mm3.2 mm
    		3.2 mm41090363A1100000
    M2.5 x 0.45 mm4.8 mm4 mm
    		4 mm41090363A1200000
    M3 x 0.5 mm4.8 mm4 mm
    		4 mm51090363A1300000
    M4 x 0.7 mm8 mm5.6 mm
    		5.6 mm51090363A1400000
    M5 x 0.8 mm9.5 mm6.6 mm
    		6.6 mm22590363A10300000
    M6 x 1 mm9.5 mm8.3 mm
    		8.3 mm22590363A10400000
    M8 x 1.25 mm14.3 mm11.9 mm
    		11.9 mm3590363A1050000
     

    Tapered Heat-Set Threaded Insert Assortments with Installation Tools

    Image of Product. Front orientation. Threaded Inserts. Tapered Heat-Set Threaded Insert Assortments with Installation Tools.
    A variety of tapered insert sizes that are easy to guide into holes with the included installation tools. Use a drill bit to make a straight hole, then taper the top half. Once installed, heat the insert with a soldering tip to melt the surrounding plastic.
    Brass—Conductive and nonmagnetic, these inserts are useful for electrical applications. They resist moisture but aren't as strong as steel inserts.
    No. of Inserts
    Included
    Includes
    Drill Bit Size
    For Max. Hole Dia.
    For Hole
    Taper Angle
    Each
    Brass
    200¼"-20 Thread × 0.3" Installed Lg. (25 Each)
    4-40 Thread × 0.135" Installed Lg. (50 Each)
    6-32 Thread × 0.15" Installed Lg. (50 Each)
    8-32 Thread × 0.185" Installed Lg. (50 Each)
    10-32 Thread × 0.225" Installed Lg. (25 Each)
    Installation Tips    		24 Ga.
    8 Ga.
    2 Ga.
    H
    S
    		0.153"
    0.199"
    0.226"
    0.267"
    0.349"    		8°97338A130000000
    200¼"-20 Thread × ½" Installed Lg. (25 Each)
    4-40 Thread × 0.219" Installed Lg. (50 Each)
    6-32 Thread × ¼" Installed Lg. (50 Each)
    8-32 Thread × 0.312" Installed Lg. (50 Each)
    10-32 Thread × ⅜" Installed Lg. (25 Each)
    Installation Tips    		9/64"
    13 Ga.
    5 Ga.
    D
    O
    		0.141"
    0.185"
    0.208"
    0.246"
    0.321"    		8°97338A11000000
    200Installation Tips
    M2.5×0.45 mm Thread × 5.56 mm Installed Lg. (50 Each)
    M3×0.5 mm Thread × 6.35 mm Installed Lg. (50 Each)
    M4×0.7 mm Thread × 7.92 mm Installed Lg. (50 Each)
    M5×0.8 mm Thread × 11.13 mm Installed Lg. (25 Each)
    M6×1 mm Thread × 12.7 mm Installed Lg. (25 Each)    		9/64"
    13 Ga.
    5 Ga.
    J
    O
    		0.141"
    0.185"
    0.208"
    0.278"
    0.321"    		8°97338A12000000
    200Installation Tips
    M2.5×0.45 mm Thread × 3.43 mm Installed Lg. (50 Each)
    M3×0.5 mm Thread × 3.81 mm Installed Lg. (50 Each)
    M4×0.7 mm Thread × 4.7 mm Installed Lg. (50 Each)
    M5×0.8 mm Thread × 6.73 mm Installed Lg. (25 Each)
    M6×1 mm Thread × 7.62 mm Installed Lg. (25 Each)    		24 Ga.
    8 Ga.
    2 Ga.
    N
    S
    		0.153"
    0.199"
    0.226"
    0.303"
    0.349"    		8°97338A14000000
    225Ceramic Insulation Tube
    Installation Tips
    M2.5×0.45 mm Thread × 3.43 mm Installed Lg. (10 Each)
    M2.5×0.45 mm Thread × 5.56 mm Installed Lg. (10 Each)
    M3.5×0.6 mm Thread × 3.81 mm Installed Lg. (25 Each)
    M3.5×0.6 mm Thread × 6.35 mm Installed Lg. (25 Each)
    M3×0.5 mm Thread × 3.8 mm Installed Lg. (25 Each)
    M3×0.5 mm Thread × 6.35 mm Installed Lg. (25 each)
    M4×0.7 mm Thread × 4.7 mm Installed Lg. (25 Each)
    M4×0.7 mm Thread × 7.92 mm Installed Lg. (25 Each)
    M5×0.8 mm Thread × 11.13 mm Installed Lg. (10 Each)
    M5×0.8 mm Thread × 6.73 mm Installed Lg. (25 Each)
    M6×1 mm Thread × 12.7 mm Installed Lg. (10 Each)
    M6×1 mm Thread × 7.62 mm Installed Lg. (10 Each)
    Soldering Iron    		9/64"
    24 Ga.
    13 Ga.
    8 Ga.
    2 Ga.
    J
    N
    O
    S
    		0.141"
    0.152"
    0.185"
    0.199"
    0.221"
    0.277"
    0.302"
    0.316"
    0.348"    		8°94454A200000000
    2351/4"-20 Thread × 0.3" Installed Lg. (25 Each)
    1/4"-20 Thread × 1/2" Installed Lg. (20 Each)
    4-40 Thread × 0.135" Installed Lg. (25 Each)
    4-40 Thread × 0.219" Installed Lg. (25 Each)
    6-32 Thread × 0.150" Installed Lg. (25 Each)
    6-32 Thread × 1/4" Installed Lg. (25 Each)
    8-32 Thread × 0.185" Installed Lg. (25 Each)
    8-32 Thread × 0.312" Installed Lg. (25 Each)
    10-24 Thread × 0.225" Installed Lg. (10 Each)
    10-24 Thread × 3/8" Installed Lg. (10 Each)
    10-32 Thread × 0.225" Installed Lg. (10 Each)
    10-32 Thread × 3/8" Installed Lg. (10 Each)
    Ceramic Insulation Tube
    Installation Tips
    Soldering Iron    		9/64"
    24 Ga.
    13 Ga.
    8 Ga.
    5 Ga.
    2 Ga.
    D
    H
    O
    S
    		0.141"
    0.152"
    0.185"
    0.199"
    0.206"
    0.221"
    0.246"
    0.266"
    0.316"
    0.348"    		8°94454A100000000
     

    Split-Preventing Tee-Nut Threaded Inserts for Hardwood

    Prongs or barbs create a secure fit that won't split hardwood. To install these inserts, hammer them into a drilled hole. The installed length includes the flange.
    Pronged Secured—With just three short prongs, these inserts are less likely to damage dense wood than other tee nut inserts.
    Barbed Secured—The ridged barrel makes these inserts even less likely to split hardwood than pronged inserts. They're often used in wood that has been cut across the growth rings.
    Steel—Best for dry environments since moisture will cause these inserts to rust.
    Black-Oxide Steel—These inserts are often chosen for the dark, matte appearance. They're best for dry environments since they can rust when exposed to moisture.
    Zinc-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Barrel
    Flange
    Thread
    Size
    Installed
    Lg.
    Dia.
    Lg.
    Dia.
    Thick.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Pkg.
    Qty.
    Pkg.
    Pronged Secured
    Image of Product. Pronged Secured. Bottom orientation. Threaded Inserts. Split-Preventing Tee-Nut Threaded Inserts for Hardwood, Pronged Secured.

    Pronged Secured

     
    Steel
    1/4"-20
    		0.235"0.305"3/16"3/4"0.047"5/16"
    		0.313"5090975A23500000
    1/4"-20
    		0.360"0.305"5/16"3/4"0.047"5/16"
    		0.313"5090975A2370000
    1/4"-20
    		0.397"0.305"1/4"3/4"0.047"5/16"
    		0.313"5090975A2360000
    1/4"-20
    		0.422"0.305"3/8"3/4"0.047"5/16"
    		0.313"5090975A2380000
    1/4"-20
    		0.485"0.305"7/16"3/4"0.047"5/16"
    		0.313"5090975A2390000
    1/4"-20
    		0.610"0.305"9/16"3/4"0.047"5/16"
    		0.313"5090975A2400000
     
    Black-Oxide Steel
    6-32
    		0.274"0.162"1/4"9/16"0.024"11/64"
    		0.172"5090975A2270000
    8-32
    		0.281"0.209"1/4"23/32"0.031"7/32"
    		0.219"5090975A22800000
    8-32
    		0.289"0.22"1/4"1/2"0.039"7/32"
    		0.219"5090975A2300000
    10-24
    		0.227"0.243"3/16"3/4"0.039"1/4"
    		0.250"5090975A21100000
    10-24
    		0.352"0.243"5/16"45/64"0.039"1/4"
    		0.250"5090975A21200000
    10-24
    		0.414"0.243"3/8"3/4"0.039"1/4"
    		0.250"2590975A2130000
    10-24
    		0.477"0.243"7/16"45/64"0.039"1/4"
    		0.250"2590975A2140000
    10-24
    		0.602"0.243"9/16"3/4"0.039"1/4"
    		0.250"2590975A2150000
    10-32
    		0.227"0.243"3/16"1/2"0.039"1/4"
    		0.250"2590975A2160000
    10-32
    		0.477"0.243"7/16"45/64"0.039"1/4"
    		0.250"2590975A2170000
    1/4"-20
    		0.235"0.305"3/16"3/4"0.047"5/16"
    		0.313"2590975A2180000
    1/4"-20
    		0.297"0.305"1/4"3/4"0.047"5/16"
    		0.313"2590975A2190000
    1/4"-20
    		0.360"0.305"5/16"3/4"0.047"5/16"
    		0.313"5090975A22000000
    1/4"-20
    		0.610"0.305"9/16"3/4"0.047"5/16"
    		0.313"2590975A2230000
    5/16"-18
    		0.430"0.37"3/8"7/8"0.055"3/8"
    		0.375"2590975A22500000
    5/16"-18
    		0.680"0.37"5/8"7/8"0.055"3/8"
    		0.375"2590975A22400000
    3/8"-16
    		0.501"0.44"7/16"1"0.063"29/64"
    		0.453"2590975A22600000
     
    Zinc-Plated Steel
    4-40
    		0.149"0.13"1/8"23/64"0.024"9/64"
    		0.141"10090975A00200000
    6-32
    		0.274"0.162"1/4"9/16"0.024"11/64"
    		0.172"10090975A0070000
    8-32
    		0.281"0.209"1/4"23/32"0.031"7/32"
    		0.219"10090975A0090000
    8-32
    		0.289"0.22"1/4"1/2"0.039"7/32"
    		0.219"10090975A0120000
    8-32
    		0.297"0.22"1/4"19/32"0.047"1/4"
    		0.250"10090975A0140000
    10-24
    		0.227"0.243"3/16"3/4"0.039"1/4"
    		0.250"10090975A04300000
    10-24
    		0.320"0.243"9/32"3/4"0.039"1/4"
    		0.250"10090975A03800000
    10-24
    		0.352"0.243"5/16"45/64"0.039"1/4"
    		0.250"10090975A04200000
    10-24
    		0.414"0.243"3/8"3/4"0.039"1/4"
    		0.250"10090975A04100000
    10-24
    		0.477"0.243"7/16"45/64"0.039"1/4"
    		0.250"10090975A05000000
    10-24
    		0.602"0.243"9/16"3/4"0.039"1/4"
    		0.250"2590975A2310000
    10-32
    		0.320"0.243"9/32"3/4"0.039"1/4"
    		0.250"10090975A02300000
    10-32
    		0.352"0.243"5/16"45/64"0.039"1/4"
    		0.250"10090975A01800000
    10-32
    		0.477"0.243"7/16"45/64"0.039"1/4"
    		0.250"10090975A02100000
    1/4"-20
    		0.235"0.305"3/16"3/4"0.047"5/16"
    		0.313"5090975A0640000
    1/4"-20
    		0.297"0.305"1/4"3/4"0.047"5/16"
    		0.313"5090975A2320000
    1/4"-20
    		0.360"0.305"5/16"3/4"0.047"5/16"
    		0.313"10090975A05300000
    1/4"-20
    		0.422"0.305"3/8"3/4"0.047"5/16"
    		0.313"5090975A0550000
    1/4"-20
    		0.485"0.305"7/16"3/4"0.047"5/16"
    		0.313"5090975A2330000
    1/4"-20
    		0.610"0.305"9/16"3/4"0.047"5/16"
    		0.313"5090975A0570000
    5/16"-18
    		0.430"0.37"3/8"7/8"0.055"3/8"
    		0.375"2590975A23400000
    5/16"-18
    		0.680"0.37"5/8"7/8"0.055"3/8"
    		0.375"5090975A06500000
    3/8"-16
    		0.501"0.44"7/16"1"0.063"29/64"
    		0.453"5090975A05900000
    1/2"-13
    		0.438"0.55"3/8"1 1/16"0.063"9/16"
    		0.563"5090975A20100000
     
    18-8 Stainless Steel
    6-32
    		0.281"0.170"1/4"1/2"0.031"11/64"
    		0.172"2593747A11000000
    10-24
    		0.227"0.243"3/16"45/64"0.039"1/4"
    		0.250"2593747A12000000
    10-32
    		0.320"0.243"9/32"3/4"0.039"1/4"
    		0.250"2593747A13000000
    1/4"-20
    		0.360"0.305"5/16"3/4"0.047"5/16"
    		0.313"2593747A14000000
    1/4"-20
    		0.485"0.305"7/16"3/4"0.047"5/16"
    		0.313"2593747A15000000
     
    Barbed Secured
    Image of Product. Barbed Secured. Bottom orientation. Threaded Inserts. Split-Preventing Tee-Nut Threaded Inserts for Hardwood, Barbed Secured.

    Barbed Secured

     
    Steel
    1/4"-20
    		0.360"0.305"5/16"3/4"0.047"5/16"
    		0.313"5090598A02700000
    1/4"-20
    		0.485"0.305"7/16"3/4"0.047"5/16"
    		0.313"5090598A02900000
    1/4"-20
    		0.547"0.305"1/2"5/8"0.047"5/16"
    		0.313"5090598A04300000
    1/4"-20
    		0.610"0.305"9/16"3/4"0.047"5/16"
    		0.313"5090598A05000000
    5/16"-18
    		0.434"3/8"3/8"7/8"0.059"3/8"
    		0.375"5090598A03000000
    5/16"-18
    		0.680"0.37"5/8"3/4"0.055"25/64"
    		0.391"2590598A04900000
    5/16"-18
    		0.680"0.37"5/8"7/8"0.055"3/8"
    		0.375"5090598A04500000
    5/16"-18
    		0.934"0.385"7/8"7/8"0.059"25/64"
    		0.391"2590598A04800000
    3/8"-16
    		0.501"0.44"7/16"1"0.063"29/64"
    		0.453"2090598A03100000
    1/2"-13
    		0.466"0.58"3/8"1 1/4"0.091"19/32"
    		0.594"1090598A03300000
     
    Black-Oxide Steel
    8-32
    		0.281"0.203"1/4"23/32"0.031"13/64"
    		0.203"2590598A10500000
    10-24
    		0.360"0.255"5/16"45/64"0.047"1/4"
    		0.250"2590598A10800000
    10-32
    		0.360"0.255"5/16"45/64"0.047"1/4"
    		0.250"2590598A11100000
    1/4"-20
    		0.360"0.305"5/16"3/4"0.047"5/16"
    		0.313"2590598A11400000
    1/4"-20
    		0.485"0.305"7/16"3/4"0.047"5/16"
    		0.313"2590598A11700000
    1/4"-20
    		0.547"0.305"1/2"5/8"0.047"5/16"
    		0.313"2590598A12000000
    1/4"-20
    		0.610"0.305"9/16"3/4"0.047"5/16"
    		0.313"2590598A12300000
    5/16"-18
    		0.434"3/8"3/8"7/8"0.059"3/8"
    		0.375"2590598A12600000
    5/16"-18
    		0.680"0.37"5/8"7/8"0.055"3/8"
    		0.375"1090598A13200000
    5/16"-18
    		0.934"0.385"7/8"7/8"0.059"25/64"
    		0.391"1090598A13500000
    3/8"-16
    		0.501"0.44"7/16"1"0.063"29/64"
    		0.453"1090598A13800000
    1/2"-13
    		0.466"0.58"3/8"1 1/4"0.091"19/32"
    		0.594"590598A14100000
     
    Zinc-Plated Steel
    8-32
    		0.281"0.203"1/4"23/32"0.031"13/64"
    		0.203"5090598A02400000
    10-24
    		0.360"0.255"5/16"45/64"0.047"1/4"
    		0.250"5090598A02500000
    10-32
    		0.360"0.255"5/16"45/64"0.047"1/4"
    		0.250"5090598A02600000
    1/4"-20
    		0.360"0.305"5/16"3/4"0.047"5/16"
    		0.313"5090598A21200000
    1/4"-20
    		0.485"0.305"7/16"3/4"0.047"5/16"
    		0.313"5090598A21500000
    1/4"-20
    		0.547"0.305"1/2"5/8"0.047"5/16"
    		0.313"5090598A21800000
    1/4"-20
    		0.610"0.305"9/16"3/4"0.047"5/16"
    		0.313"5090598A22100000
    5/16"-18
    		0.434"3/8"3/8"7/8"0.059"3/8"
    		0.375"2590598A22400000
    5/16"-18
    		0.680"0.37"5/8"3/4"0.055"25/64"
    		0.391"1090598A22700000
    5/16"-18
    		0.680"0.37"5/8"7/8"0.055"3/8"
    		0.375"1090598A23000000
    5/16"-18
    		0.934"0.385"7/8"7/8"0.059"25/64"
    		0.391"1090598A23300000
    3/8"-16
    		0.501"0.44"7/16"1"0.063"29/64"
    		0.453"1090598A23600000
    1/2"-13
    		0.466"0.58"3/8"1 1/4"0.091"19/32"
    		0.594"590598A23900000
     

    Press-In Threaded Inserts for Carbon Fiber, Fiberglass, and Garolite

    Image of Product. Front orientation. Threaded Inserts. Press-In Threaded Inserts for Carbon Fiber, Fiberglass, and Garolite.
    Add threads to dense composites without crushing or splitting them. Press these inserts into a drilled hole and the flexible metal teeth anchor them—no adhesives needed.
    18-8 Stainless Steel and Nylon—With stainless steel threads and a nylon base, these inserts resist rust and mild chemicals.
    Inserts
    Installation
    Tools
    Thread
    Size
    Installed
    Lg.
    Rows of
    Teeth
    Drill Bit
    Size, mm
    For Max.
    Hole Dia., mm
    Each
    Each
    Standard Profile
     
    18-8 Stainless Steel and Nylon
    10-24
    		0.236"212
    		1293907A1010000093913A101000000
    10-24
    		0.335"412
    		1293907A102000093913A10100000
    1/4"-20
    		0.197"112
    		1293907A103000093913A10200000
    1/4"-20
    		0.236"212
    		1293907A104000093913A10200000
    1/4"-20
    		0.315"412
    		1293907A105000093913A10200000
    1/4"-20
    		0.591"412
    		1293907A106000093913A10200000
    M4 x 0.7 mm5 mm112
    		1293918A101000093913A10300000
    M4 x 0.7 mm6 mm212
    		1293918A102000093913A10300000
    M4 x 0.7 mm8.5 mm412
    		1293918A103000093913A10300000
    M5 x 0.8 mm5 mm112
    		1293918A104000093913A10400000
    M5 x 0.8 mm6 mm212
    		1293918A105000093913A10400000
    M5 x 0.8 mm8.5 mm412
    		1293918A106000093913A10400000
    M6 x 1 mm5 mm112
    		1293918A107000093913A10500000
    M6 x 1 mm6 mm212
    		1293918A108000093913A10500000
    M6 x 1 mm8.5 mm412
    		1293918A109000093913A10500000
    M6 x 1 mm15 mm412
    		1293918A110000093913A10500000
     

    Thread-Locking Threaded Insert Assortments

    Image of Product. Front orientation. Threaded Inserts. Thread-Locking Threaded Insert Assortments.
    These assortments include various sizes of thread-locking inserts, which won’t back out or loosen from vibration. Also known as E-Z Lok, they come with Loctite® adhesive already applied, and the adhesive reaches full strength after 72 hours. After drilling and tapping your hole, install inserts with a wrench or use an installation bit (not included). To use a wrench, thread an insert and two hex nuts onto a bolt. Then, grip and turn the top nut to drive into the hole.
    Standard Wall—Stronger than thin-wall inserts, these are your go-to choice for threading most holes.
    Black Phosphate-Coated Steel—These inserts resist occasional moisture.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    For Tap
    No. of Inserts
    Included
    Includes
    Thread
    Spacing
    Thread
    Size
    Thread
    Pitch
    Drill Bit
    Size
    For Maximum
    Hole Diameter
    Drive
    Style
    Each
    Standard Wall
     
    Black Phosphate-Coated Steel
    221"-14 Thread × 1 1/4" Installed Lg. (2 Each)
    1/2"-20 Thread × 0.656" Installed Lg. (6 Each)
    3/4"-16 Thread × 0.781" Installed Lg. (7 Each)
    5/8"-18 Thread × 0.688" Installed Lg. (7 Each)    		Fine
    		3/4"-10
    7/8"-9
    1"-8
    1 3/8"-12    		—21/32"
    49/64"
    7/8"
    1 9/32"    		21/32"
    49/64"
    7/8"
    1 9/32"    		Slotted
    		90248A115000000
    221"-8 Thread × 1 1/4" Installed Lg. (2 Each)
    1/2"-13 Thread × 0.656" Installed Lg. (6 Each)
    3/4"-10 Thread × 0.781" Installed Lg. (7 Each)
    5/8"-11 Thread × 0.688" Installed Lg. (7 Each)    		Coarse
    		3/4"-10
    7/8"-9
    1"-8
    1 3/8"-12    		—21/32"
    49/64"
    7/8"
    1 9/32"    		21/32"
    49/64"
    7/8"
    1 9/32"    		Slotted
    		90248A11100000
    33M8×1.25 mm Thread × 12.5 mm Installed Lg. (10 Each)
    M10×1.5 mm Thread × 17 mm Installed Lg. (10 Each)
    M12×1.75 mm Thread × 17 mm Installed Lg. (8 Each)
    M16×2 mm Thread × 20 mm Installed Lg. (5 Each)    		Coarse
    		M12
    M16
    M16
    M24    		1.75 mm
    2 mm
    2 mm
    3 mm    		10.4 mm
    14 mm
    14 mm
    21 mm     		10.4 mm
    14 mm
    14 mm
    21 mm     		Slotted
    		97084A290000000
    36M6×1 mm Thread × 0.406" Installed Lg. (10 Each)
    M8×1.25 mm Thread × 0.484" Installed Lg. (10 Each)
    M10×1.5 mm Thread × 0.516" Installed Lg. (10 Each)
    M12×1.75 mm Thread × 0.656" Installed Lg. (6 Each)    		Coarse
    		3/8"-16,
    1/2"-13,
    9/16"-12,
    3/4"-10    		—5/16"
    27/64"
    31/64"
    21/32"    		5/16"
    27/64"
    31/64"
    21/32"    		Slotted
    		97084A21000000
    461/2"-13 Thread × 0.656" Installed Lg. (6 Each)
    1/4"-20 Thread × 0.438" Installed Lg. (10 Each)
    3/8"-16 Thread × 0.516" Installed Lg. (10 Each)
    5/16"-18 Thread × 0.484" Installed Lg. (10 Each)
    10-24 Thread × 0.406" Installed Lg. (10 Each)    		Coarse
    		3/8"-16,
    7/16"-14,
    1/2"-13,
    9/16"-12,
    3/4"-10    		—5/16"
    23/64"
    27/64"
    31/64"
    21/32"    		5/16"
    23/64"
    27/64"
    31/64"
    21/32"    		Slotted
    		90248A11200000
    461/2"-20 Thread × 0.656" Installed Lg. (6 Each)
    1/4"-28 Thread × 0.438" Installed Lg. (10 Each)
    3/8"-24 Thread × 0.516" Installed Lg. (10 Each)
    5/16"-24 Thread × 0.484" Installed Lg. (10 Each)
    10-32 Thread × 0.406" Installed Lg. (10 Each)    		Fine
    		3/8"-16,
    7/16"-14,
    1/2"-13,
    9/16"-12,
    3/4"-10    		—5/16"
    23/64"
    27/64"
    31/64"
    21/32"    		5/16"
    23/64"
    27/64"
    31/64"
    21/32"    		Slotted
    		90248A11400000
    50M3×0.5 mm Thread × 6.5 mm Installed Lg. (10 Each)
    M4×0.7 mm Thread × 7.5 mm Installed Lg. (10 Each)
    M5×0.8 mm Thread × 7.5 mm Installed Lg. (10 Each)
    M6×1 mm Thread × 10.5 mm Installed Lg. (10 Each)
    M8×1.25 mm Thread × 12.5 mm Installed Lg. (10 Each)    		Coarse
    		M6
    M8
    M8
    M10
    M12     		1 mm
    1.25 mm
    1.25 mm
    1.5 mm
    1.75 mm     		5.1 mm
    6.9 mm
    6.9 mm
    8.6 mm,
    10.4 mm     		5.1 mm
    6.9 mm
    6.9 mm
    8.6 mm
    10.4 mm     		Slotted
    		97084A28000000
     
    18-8 Stainless Steel
    33M8×1.25 mm Thread × 12.5 mm Installed Lg. (10 Each)
    M10×1.5 mm Thread × 17 mm Installed Lg. (10 Each)
    M12×1.75 mm Thread × 17 mm Installed Lg. (8 Each)
    M16×2 mm Thread × 20 mm Installed Lg. (5 Each)    		Coarse
    		M12
    M16
    M16
    M24    		1.75 mm
    2 mm
    2 mm
    3 mm    		10.4 mm
    14 mm
    14 mm
    21 mm     		10.4 mm
    14 mm
    14 mm
    21 mm     		Slotted
    		97120A035000000
    36M6×1 mm Thread × 0.406" Installed Lg. (10 Each)
    M8×1.25 mm Thread × 0.484" Installed Lg. (10 Each)
    M10×1.5 mm Thread × 0.516" Installed Lg. (10 Each)
    M12×1.75 mm Thread × 0.656" Installed Lg. (6 Each)    		Coarse
    		3/8"-16,
    1/2"-13,
    9/16"-12,
    3/4"-10    		—5/16"
    27/64"
    31/64"
    21/32"    		5/16"
    27/64"
    31/64"
    21/32"    		Slotted
    		97120A033000000
    461/2"-13 Thread × 0.656" Installed Lg. (6 Each)
    1/4"-20 Thread × 0.438" Installed Lg. (10 Each)
    3/8"-16 Thread × 0.516" Installed Lg. (10 Each)
    5/16"-18 Thread × 0.484" Installed Lg. (10 Each)
    10-24 Thread × 0.406" Installed Lg. (10 Each)    		Coarse
    		3/8"-16,
    7/16"-14,
    1/2"-13,
    9/16"-12,
    3/4"-10    		—5/16"
    23/64"
    27/64"
    31/64"
    21/32"    		5/16"
    23/64"
    27/64"
    31/64"
    21/32"    		Slotted
    		90247A031000000
    461/2"-20 Thread × 0.656" Installed Lg. (6 Each)
    1/4"-28 Thread × 0.438" Installed Lg. (10 Each)
    3/8"-24 Thread × 0.516" Installed Lg. (10 Each)
    5/16"-24 Thread × 0.484" Installed Lg. (10 Each)
    10-32 Thread × 0.406" Installed Lg. (10 Each)    		Fine
    		3/8"-16,
    7/16"-14,
    1/2"-13,
    9/16"-12,
    3/4"-10    		—5/16"
    23/64"
    27/64"
    31/64"
    21/32"    		5/16"
    23/64"
    27/64"
    31/64"
    21/32"    		Slotted
    		90247A032000000
    50M3×0.5 mm Thread × 6.5 mm Installed Lg. (10 Each)
    M4×0.7 mm Thread × 7.5 mm Installed Lg. (10 Each)
    M5×0.8 mm Thread × 7.5 mm Installed Lg. (10 Each)
    M6×1 mm Thread × 10.5 mm Installed Lg. (10 Each)
    M8×1.25 mm Thread × 12.5 mm Installed Lg. (10 Each)    		Coarse
    		M6
    M8
    M8
    M10
    M12     		1 mm
    1.25 mm
    1.25 mm
    1.5 mm
    1.75 mm     		5.1 mm
    6.9 mm
    6.9 mm
    8.6 mm,
    10.4 mm     		5.1 mm
    6.9 mm
    6.9 mm
    8.6 mm
    10.4 mm     		Slotted
    		97120A034000000
     

    Thread-Locking Threaded Inserts with Installation Tools

    Image of Product. Front orientation. Threaded Inserts. Thread-Locking Threaded Inserts with Installation Tools.
    What you need to add or repair threads quickly in parts under stress or vibration. These inserts come with a closed-end tap, a drill bit, and an installation bit. Also known as E-Z Lok, they have Loctite® adhesive already applied, and the adhesive reaches full strength after 72 hours.
    Standard Wall—Stronger than thin-wall inserts, these are your go-to choice for threading most holes.
    Thin Wall—Use these inserts near the edge of workpieces or wherever you only have space for a small hole. They're also lighter than standard and extra-thick wall inserts for applications with strict weight limits.
    Black Phosphate-Coated Steel—These inserts resist occasional moisture.
    Thread Size
    For Tap Thread
    Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Drive
    Style
    No. of Inserts
    Included
    Each
    Standard Wall
     
    Black Phosphate-Coated Steel
    8-32
    		5/16"-18
    		0.290"F
    		0.257"Slotted
    		1095109A115000000
    10-32
    		3/8"-16
    		0.406"5/16"
    		0.313"Slotted
    		1095109A11000000
    1/4"-20
    		7/16"-14
    		0.437"23/64"
    		0.359"Slotted
    		1095109A11100000
    5/16"-18
    		1/2"-13
    		0.484"27/64"
    		0.422"Slotted
    		1095109A11200000
    3/8"-16
    		9/16"-12
    		0.515"31/64"
    		0.484"Slotted
    		1095109A11300000
    1/2"-13
    		3/4"-10
    		0.656"21/32"
    		0.656"Slotted
    		1095109A114000000
    M4 x 0.7 mmM8 x 1.25 mm7.5 mm6.9 mm
    		6.9 mmSlotted
    		1090025A11000000
    M5 x 0.8 mmM8 x 1.25 mm7.5 mm6.9 mm
    		6.9 mmSlotted
    		1090025A11100000
    M6 x 1 mmM10 x 1.5 mm10.5 mm8.6 mm
    		8.6 mmSlotted
    		1090025A11200000
    M8 x 1.25 mmM12 x 1.75 mm12.5 mm10.4 mm
    		10.4 mmSlotted
    		1090025A11300000
     
    Thin Wall
     
    Black Phosphate-Coated Steel
    10-32
    		5/16"-18
    		0.312"I
    		0.272"Slotted
    		1096015A11000000
    1/4"-20
    		3/8"-16
    		0.375"Q
    		0.332"Slotted
    		1096015A11100000
    5/16"-18
    		7/16"-14
    		0.437"X
    		0.397"Slotted
    		1096015A11200000
    3/8"-16
    		1/2"-13
    		0.500"29/64"
    		0.453"Slotted
    		1096015A11300000
    1/2"-13
    		5/8"-11
    		0.625"37/64"
    		0.578"Slotted
    		1096015A114000000
    M6 x 1 mm3/8"-16
    		0.375"Q
    		0.332"Slotted
    		1090025A11500000
     

    Thread-Masking Tee-Nut Threaded Inserts for Wood and Plastic

    Image of Product. Top. Top orientation. Threaded Inserts. Thread-Masking Tee-Nut Threaded Inserts for Wood and Plastic.
    Image of Product. Bottom. Bottom orientation. Threaded Inserts. Thread-Masking Tee-Nut Threaded Inserts for Wood and Plastic.

    Top

    Bottom

    Create strong threads in wood and plastic that won’t get clogged during finishing processes. These inserts have a silicone plug that blocks out paint, coatings, and debris—and won’t melt when exposed to heat. The flange has four prongs that grip the surrounding material to help prevent twisting.
    For wood, install the inserts in a drilled hole at any time. For plastic, install them before injection molding. Once finishing is complete, pop the plug out by threading your fastener through the insert or just peel it off.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals. Since they’re lead-free, they can be safely recycled.
    Barrel
    Flange
    Thread
    Size
    Installed
    Lg.
    Dia.
    Lg.
    Dia.
    Thick.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Plug Material
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    1/4"-20
    		0.485"0.305"7/16"3/4"0.047"5/16"
    		0.313"Silicone Rubber
    		1091172A101000000
     

    Swage-Locking Threaded Inserts

    Image of Product. Bottom orientation. Threaded Inserts. Swage-Locking Threaded Inserts.
    Image of Specification. Front orientation. Contains Annotated. Threaded Inserts. Swage-Locking Threaded Inserts.
    Add strong threads to the edges of soft metal without bulging or cracking the material. These inserts have thinner walls than our key-locking and thread-locking inserts, so they don’t need as much space around them. The knurls press (swage) into the material to keep inserts in place when you tighten or loosen a screw.
    To install these inserts, you need a drill bit, a counterbore, a standard tap, an installation tool, and a hammer. Drill a hole, counterbore the top, and tap it. Place the insert into the installation tool, then hand-tighten it into the tapped hole. Strike the tool to secure the insert and drive the knurls into the surrounding material.
    High-Strength 17-4 PH Stainless Steel—The strongest stainless steel inserts we offer. They handle high-stress installations, such as pump and compressor housings, and the heavy vibration of aircraft parts. They won’t rust in wet and outdoor environments but can’t withstand the harsh chemicals and acids that 316 stainless steel can.
    Inserts
    Installation
    Tools
    For
    Counterbore
    Thread
    Size
    For Tap Thread
    Size
    Installed
    Lg.
    For Max.
    Hole Dia.
    Dia.
    Dp.
    Mil. Spec.
    Each
    Each
    High-Strength 17-4 PH Stainless Steel
    2-56
    		6-40
    		0.141"0.113"0.138"0.045"MIL-DTL-45932/193570A1010000006645N1010000000
    4-40
    		8-32
    		0.203"0.140"0.164"0.052"MIL-DTL-45932/193570A102000006645N102000000
    6-32
    		10-32
    		0.219"0.166"0.187"0.065"MIL-DTL-45932/193570A10300006645N103000000
    8-32
    		12-28
    		0.250"0.191"0.216"0.065"MIL-DTL-45932/193570A10400006645N104000000
    10-24
    		1/4"-28
    		0.297"0.221"0.25"0.082"MIL-DTL-45932/193570A10500006645N105000000
    10-32
    		1/4"-28
    		0.297"0.221"0.25"0.082"MIL-DTL-45932/193570A10600006645N105000000
    1/4"-20
    		5/16"-24
    		0.391"0.281"0.312"0.082"MIL-DTL-45932/193570A107000006645N106000000
    1/4"-28
    		5/16"-24
    		0.391"0.281"0.312"0.082"MIL-DTL-45932/193570A108000006645N106000000
    5/16"-18
    		3/8"-24
    		0.484"0.343"0.375"0.082"MIL-DTL-45932/193570A109000006645N107000000
    5/16"-24
    		3/8"-24
    		0.484"0.343"0.375"0.082"MIL-DTL-45932/193570A111000006645N107000000
    3/8"-16
    		7/16"-20
    		0.563"0.404"0.437"0.113"MIL-DTL-45932/193570A112000006645N108000000
    3/8"-24
    		7/16"-20
    		0.563"0.404"0.437"0.113"MIL-DTL-45932/193570A113000006645N108000000
    7/16"-14
    		1/2"-20
    		0.672"0.468"0.5"0.113"MIL-DTL-45932/193570A114000006645N109000000
    7/16"-20
    		1/2"-20
    		0.672"0.468"0.5"0.113"MIL-DTL-45932/193570A115000006645N109000000
    1/2"-13
    		9/16"-24
    		0.750"0.531"0.562"0.113"MIL-DTL-45932/193570A116000006645N111000000
    1/2"-20
    		9/16"-24
    		0.750"0.531"0.562"0.113"MIL-DTL-45932/193570A117000006645N111000000
    9/16"-12
    		11/16"-120.844"0.625"0.687"0.15"MIL-DTL-45932/193570A118000006645N112000000
    9/16"-18
    		11/16"-120.844"0.625"0.687"0.15"MIL-DTL-45932/193570A119000006645N112000000
    5/8"-11
    		3/4"-16
    		0.953"0.703"0.75"0.156"MIL-DTL-45932/193570A121000006645N113000000
    5/8"-18
    		3/4"-16
    		0.953"0.703"0.75"0.156"MIL-DTL-45932/193570A122000006645N113000000
    3/4"-10
    		7/8"-20
    		1.125"0.844"0.875"0.156"MIL-DTL-45932/193570A123000006645N114000000
    3/4"-16
    		7/8"-20
    		1.125"0.844"0.875"0.156"MIL-DTL-45932/193570A124000006645N114000000
     

    Tee-Nut Threaded Inserts for Fiberglass

    Image of Product. Front orientation. Threaded Inserts. Tee-Nut Threaded Inserts for Fiberglass.
    Reduce the risk of splitting or cracking fiberglass. These inserts have three short, thin prongs that won't dig too deep or wedge between layers of the material. Hammer them into a drilled hole and the wide flange distributes the load over a large area.
    Zinc-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.
    Barrel
    Flange
    Thread
    Size
    Installed
    Lg.
    Dia.
    Lg.
    Dia.
    Thick.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    8-32
    		0.289"0.22"1/4"1/2"0.04"7/32"
    		0.219"10090975A101000000
    10-32
    		0.227"0.243"3/16"1/2"0.04"1/4"
    		0.250"10090975A01500000
    10-32
    		0.500"0.243"3/8"1/2"0.04"1/4"
    		0.250"2590975A51100000
    1/4"-20
    		0.235"0.305"3/16"3/4"0.05"5/16"
    		0.313"5090975A07100000
    M6 x 1 mm6.8 mm7.7 mm5.6 mm19.1 mm1.2 mm7.9 mm
    		7.9 mm2590975A41100000
     

    Male Heat-Set Threaded Inserts for Plastic

    Image of Product. Front orientation. Threaded Inserts. Male Heat-Set Threaded Inserts for Plastic.
    Mount components directly to plastic parts. The male threaded rod on these inserts creates an attachment point. Heat them on a hot plate and press the knurled end into a straight hole. The heat melts the surrounding plastic and as it cools, it hardens around the knurls.
    Brass—Conductive and nonmagnetic, these inserts are useful for electrical applications. They resist moisture but aren't as strong as steel inserts.
    Thread Size
    Thread
    Lg.
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Each
    Standard Profile
     
    Brass
    2-56
    		3/8"0.157"3.2 mm
    		0.129"96975A10100000
    4-40
    		1/4"0.226"22 Ga.
    		0.160"96975A1020000
    6-32
    		3/8"0.281"12 Ga.
    		0.191"96975A1030000
    8-32
    		3/8"0.321"2 Ga.
    		0.224"96975A1040000
    10-24
    		3/8"0.375"6.4 mm
    		0.255"96975A1050000
    10-32
    		3/8"0.375"6.4 mm
    		0.255"96975A1060000
    1/4"-20
    		1/2"0.500"O
    		0.318"96975A1070000
    1/4"-28
    		1/2"0.500"O
    		0.318"96975A1080000
    5/16"-18
    		5/8"0.500"V
    		0.380"96975A1090000
    5/16"-24
    		5/8"0.500"V
    		0.380"96975A1110000
    3/8"-16
    		3/4"0.500"15/32"
    		0.471"96975A1120000
    3/8"-24
    		3/4"0.500"15/32"
    		0.471"96975A1130000
    M2 x 0.4 mm9.525 mm4 mm3.2 mm
    		3.1 mm96975A1140000
    M2.5 x 0.45 mm6.35 mm5.7 mm22 Ga.
    		3.9 mm96975A1150000
    M3 x 0.5 mm6.35 mm5.7 mm22 Ga.
    		3.9 mm96975A1160000
    M3.5 x 0.6 mm9.525 mm7.1 mm12 Ga.
    		4.7 mm96975A1170000
    M4 x 0.7 mm9.525 mm8.2 mm2 Ga.
    		5.5 mm96975A1180000
    M5 x 0.8 mm9.525 mm9.5 mm6.4 mm
    		6.3 mm96975A1190000
    M6 x 1 mm12.7 mm12.7 mmO
    		7.9 mm96975A1210000
    M8 x 1.25 mm15.875 mm12.7 mmV
    		9.5 mm96975A1220000
    M10 x 1.5 mm19.05 mm12.7 mm15/32"
    		11.8 mm96975A1230000
     

    Seize-Resistant Helical Threaded Inserts for Dissimilar Metals

    Image of Product. Bottom orientation. Threaded Inserts. Seize-Resistant Helical Threaded Inserts for Dissimilar Metals.
    Skip the primer. These inserts are coated to resist galvanic corrosion when used with aluminum or magnesium. The coating also prevents the screw from sticking or binding during installation. Also known as Heli-Coil inserts.
    Installation requires a drill bit, a helical insert tap, and an installation tool.
    Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.
    Dry-Film-Lubricated 18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Inserts
    Through-Hole
    Taps
    Closed-End
    Hole Taps
    Installation
    Tools
    Prong
    Break-Off Tools
    Thread Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    Each
    Each
    Each
    Each
    Pronged
     
    Dry-Film-Lubricated 18-8 Stainless Steel
    2-56
    		0.086"41 Ga.
    		0.096"—196246A0090000091709A09800000091709A40100000090261A14000000092955A1010000000
    2-56
    		0.172"41 Ga.
    		0.096"—196246A038000091709A0980000091709A4010000090261A1400000092955A101000000
    4-40
    		0.112"31 Ga.
    		0.120"—196246A047000091709A1010000091709A4070000090261A15100000092955A103000000
    4-40
    		0.168"31 Ga.
    		0.120"—196246A065000091709A1010000091709A4070000090261A15100000092955A103000000
    4-40
    		0.224"31 Ga.
    		0.120"—196246A094000091709A1010000091709A4070000090261A15100000092955A103000000
    6-32
    		0.138"25 Ga.
    		0.150"—196246A095000091709A1020000091709A4160000090261A15200000092955A10500000
    6-32
    		0.207"25 Ga.
    		0.150"—196246A109000091709A1020000091709A4160000090261A15200000092955A10500000
    6-32
    		0.276"25 Ga.
    		0.150"—196246A125000091709A1020000091709A4160000090261A15200000092955A10500000
    10-24
    		0.285"5 Ga.
    		0.206"—196246A285000091709A1040000091709A4280000090261A15400000092955A10900000
    10-32
    		0.190"13/64"
    		0.203"—196246A261000091709A1510000091709A4310000090261A16100000092955A10900000
    10-32
    		0.285"13/64"
    		0.203"—196246A278000091709A1510000091709A4310000090261A16100000092955A10900000
    10-32
    		0.380"13/64"
    		0.203"—196246A332000091709A1510000091709A4310000090261A16100000092955A10900000
    1/4"-20
    		0.250"H
    		0.266"—196246A177000091709A1050000091709A4370000090261A15500000092955A11100000
    1/4"-20
    		0.375"H
    		0.266"—196246A193000091709A1050000091709A4370000090261A15500000092955A11100000
    1/4"-20
    		0.500"H
    		0.266"—196246A208000091709A1050000091709A4370000090261A15500000092955A11100000
    5/16"-18
    		0.312"Q
    		0.332"—196246A219000091709A1060000091709A4430000090261A15600000092955A113000000
    5/16"-18
    		0.469"Q
    		0.332"—196246A234000091709A1060000091709A4430000090261A15600000092955A113000000
    5/16"-18
    		0.625"Q
    		0.332"—196246A248000091709A1060000091709A4430000090261A15600000092955A113000000
    M3 x 0.5 mm4.5 mm3.2 mm
    		3.2 mmDIN 8140193914A312000091709A3550000091709A5240000090261A18800000092955A155000000
    M3 x 0.5 mm6 mm3.2 mm
    		3.2 mmDIN 8140193914A317000091709A3550000091709A5240000090261A18800000092955A155000000
    M4 x 0.7 mm4 mm19 Ga.
    		0.166"—193914A323000091709A3590000091709A5270000090261A19000000092955A160000000
    M4 x 0.7 mm6 mm19 Ga.
    		0.166"—193914A329000091709A3590000091709A5270000090261A19000000092955A160000000
    M4 x 0.7 mm8 mm19 Ga.
    		0.166"DIN 8140193914A334000091709A3590000091709A5270000090261A19000000092955A160000000
    M5 x 0.8 mm5 mm5.3 mm
    		5.3 mmDIN 8140193914A341000091709A2010000091709A5300000090261A19100000092955A12900000
    M5 x 0.8 mm7.5 mm5.3 mm
    		5.3 mm—193914A346000091709A2010000091709A5300000090261A19100000092955A12900000
    M5 x 0.8 mm10 mm5.3 mm
    		5.3 mmDIN 8140193914A338000091709A2010000091709A5300000090261A19100000092955A12900000
    M6 x 1 mm9 mm6.3 mm
    		6.3 mmDIN 8140193914A355000091709A2020000091709A5330000090261A19200000092955A13100000
    M6 x 1 mm12 mm6.3 mm
    		6.3 mmDIN 8140193914A359000091709A2020000091709A5330000090261A19200000092955A13100000
    M8 x 1.25 mm8 mm8.4 mm
    		8.4 mmDIN 8140193914A363000091709A2040000091709A5420000090261A19400000092955A133000000
    M8 x 1.25 mm12 mm8.4 mm
    		8.4 mmDIN 8140193914A367000091709A2040000091709A5420000090261A19400000092955A133000000
    M8 x 1.25 mm16 mm8.4 mm
    		8.4 mmDIN 8140193914A371000091709A2040000091709A5420000090261A19400000092955A133000000
     

    Hammer-In Threaded Inserts for Hardwood

    Image of Product. Bottom orientation. Threaded Inserts. Hammer-In Threaded Inserts for Hardwood.
    Knurls grip hardwood to prevent twisting and the flange keeps these inserts from being pulled through. They’re good for light duty assemblies that don't need the precise fit of tapping inserts. Hammer inserts into a drilled hole to install. The installed length includes the flange.
    Zinc-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.
    Flange
    Thread
    Size
    Installed
    Lg.
    Dia.
    Thick.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    8-32
    		0.315"0.315"0.039"7/32"
    		0.219"2594738A110000000
    1/4"-20
    		0.303"0.473"0.059"21/64"
    		0.328"1094738A21000000
    1/4"-20
    		0.473"0.473"0.059"21/64"
    		0.328"1094738A3100000
    5/16"-18
    		0.473"0.59"0.079"13/32"
    		0.406"1094738A41000000
    3/8"-16
    		0.552"0.729"0.079"31/64"
    		0.484"1094738A11100000
     

    Finish-Your-Own Key-Locking Threaded Inserts for Soft Metal

    Image of Product. Bottom orientation. Threaded Inserts. Finish-Your-Own Key-Locking Threaded Inserts for Soft Metal.
    Image of Specification. Side1 orientation. Contains Annotated. Threaded Inserts. Finish-Your-Own Key-Locking Threaded Inserts for Soft Metal.
    Tap the thread size you need into the solid body of these inserts. They’re a great choice when you need a custom combination of internal thread size and external diameter. Use them to repair or add new threads in soft metal, such as aluminum. They can also plug threaded holes without the hassle of welding. Keys on the inserts drive into material to prevent slipping and rotating in the hole.
    To install, drill and tap a hole in your material. Then, thread the insert onto the installation tool and screw it into the hole. Place the tool over the keys and hit it with a hammer to drive them in.
    Black Phosphate-Coated Steel—These inserts resist occasional moisture.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Inserts
    Installation
    Tools
    For Tap Thread
    Size
    Installed
    Lg.
    Max. Tapping
    Dia.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    No. of Locking
    Keys
    Each
    Each
    Standard Profile
     
    Black Phosphate-Coated Steel
    5/16"-18
    		0.313"3/16"I
    		0.272"293774A11000000093741A110000000
    3/8"-16
    		0.313"1/4"Q
    		0.332"293774A1200000093741A12000000
    7/16"-14
    		0.375"5/16"X
    		0.397"493774A1300000093741A13000000
    1/2"-13
    		0.438"3/8"29/64"
    		0.453"493774A1400000093741A140000000
    9/16"-12
    		0.500"7/16"33/64"
    		0.516"493774A1500000093741A150000000
    5/8"-11
    		0.625"1/2"37/64"
    		0.578"493774A1600000093741A160000000
    3/4"-16
    		0.688"9/16"45/64"
    		0.703"493774A1700000093741A170000000
    7/8"-14
    		0.875"5/8"53/64"
    		0.828"493774A1800000093741A180000000
    1"-12
    		0.875"5/8"15/16"
    		0.936"493774A1900000093741A190000000
    1 1/8"-12
    		1.125"3/4"1 1/16"
    		1.063"493774A2100000093741A210000000
    1 1/4"-12
    		1.250"7/8"1 3/16"
    		1.188"493774A2200000093741A220000000
    1 3/8"-12
    		1.375"1"1 5/16"
    		1.313"493774A2300000093741A230000000
    M8 x 1.25 mm8 mm5 mm6.9 mm
    		6.9 mm293774A2400000093741A24000000
    M10 x 1.25 mm10 mm6 mm8.8 mm
    		8.8 mm293774A2500000093741A25000000
    M12 x 1.25 mm12 mm8 mm10.8 mm
    		10.8 mm493774A2600000093741A26000000
    M14 x 1.5 mm14 mm10 mm12.8 mm
    		12.8 mm493774A2700000093741A270000000
    M16 x 1.5 mm16 mm12 mm14.75 mm
    		14.75 mm493774A2800000093741A280000000
    M18 x 1.5 mm18 mm12 mm16.75 mm
    		16.75 mm493774A2900000093741A290000000
    M22 x 1.5 mm22 mm16 mm20.5 mm
    		20.5 mm493774A3100000093741A310000000
    M30 x 2 mm30 mm20 mm28 mm
    		28 mm493774A3200000093741A320000000
     
    18-8 Stainless Steel
    5/16"-18
    		0.313"3/16"I
    		0.272"293543A1100000093741A11000000
    3/8"-16
    		0.313"1/4"Q
    		0.332"293543A1200000093741A12000000
    7/16"-14
    		0.375"5/16"X
    		0.397"493543A1300000093741A13000000
    1/2"-13
    		0.438"3/8"29/64"
    		0.453"493543A1400000093741A140000000
    7/8"-14
    		0.875"5/8"53/64"
    		0.828"493543A1500000093741A180000000
    1 1/8"-12
    		1.125"3/4"1 1/16"
    		1.063"493543A16000000093741A210000000
    M8 x 1.25 mm8 mm5 mm6.9 mm
    		6.9 mm293543A1700000093741A24000000
    M10 x 1.25 mm10 mm6 mm8.8 mm
    		8.8 mm293543A1800000093741A25000000
    M12 x 1.25 mm12 mm8 mm10.8 mm
    		10.8 mm493543A1900000093741A26000000
    M14 x 1.5 mm14 mm10 mm12.8 mm
    		12.8 mm493543A2100000093741A270000000
    M16 x 1.5 mm16 mm12 mm14.75 mm
    		14.75 mm493543A2200000093741A280000000
    M22 x 1.5 mm22 mm16 mm20.5 mm
    		20.5 mm493543A2300000093741A310000000
     

    Twist-Resistant Closed-End Mold-In Threaded Inserts for Plastic

    Image of Product. Bottom orientation. Threaded Inserts. Twist-Resistant Closed-End Mold-In Threaded Inserts for Plastic.
    Install threads that hold fast against twisting and pulling. These inserts have six ridged points for maximum contact and a more stable hold than other mold-in inserts. Since plastic flows into the knurls and ridges as inserts are molded in, they form a more durable bond than heat-set and press-fit inserts. You can even use them with phenolic and other thermoset plastics. Inserts have a closed end that prevents plastic from filling the threads during molding.
    To install, position these inserts in your mold cavity with a core pin (not included).
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals. Since they’re lead-free, they can be safely recycled.
    Thread Size
    Installed
    Lg.
    Drill Bit
    Size
    Overall
    Dia.
    For Core
    Pin Dia.
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    8-32
    		0.530"K
    		0.52"0.130"107497N11000000
    10-24
    		0.530"K
    		0.52"0.145"107497N1200000
    10-32
    		0.530"K
    		0.52"0.156"57497N130000
    1/4"-20
    		0.670"3/8"
    		0.7"0.196"57497N1400000
    5/16"-18
    		0.830"12 mm
    		0.91"0.252"17497N150000
    3/8"-16
    		0.960"14.5 mm
    		1.04"0.307"17497N160000
    M4 x 0.7 mm13.5 mmK
    		0.52"3.200 mm107497N1700000
    M5 x 0.8 mm13.5 mmK
    		0.52"4.100 mm107497N1800000
    M6 x 1 mm17 mm3/8"
    		0.7"4.900 mm57497N1900000
    M8 x 1.25 mm21 mm12 mm
    		0.91"6.600 mm17497N210000
    M10 x 1.5 mm24.5 mm14.5 mm
    		1.04"8.300 mm17497N220000
     

    Tapered Male Heat-Set Threaded Inserts for Plastic

    Image of Product. Bottom orientation. Threaded Inserts. Tapered Male Heat-Set Threaded Inserts for Plastic.
    Guide the tapered end of these inserts into a hole for quick alignment, and then mount components onto the male threaded end. To install, first drill a hole into your plastic workpiece and taper the top half. Then, heat the insert on a hot plate and press the knurled end into the hole.
    Brass—Conductive and nonmagnetic, these inserts are useful for electrical applications. They resist moisture but aren't as strong as steel inserts.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals. Since they’re lead-free, they can be safely recycled.
    Thread Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    For Hole
    Taper Angle
    Pkg.
    Qty.
    Pkg.
    Brass
    4-40
    		0.219"9/64"
    		0.141"8°593518A110000000
    6-32
    		0.250"13 Ga.
    		0.185"8°593518A12000000
    8-32
    		0.312"5 Ga.
    		0.208"8°593518A13000000
    10-24
    		0.375"D
    		0.246"8°593518A14000000
    10-32
    		0.375"D
    		0.246"8°593518A15000000
    1/4"-20
    		0.500"O
    		0.321"8°593518A16000000
    1/4"-28
    		0.500"O
    		0.321"8°593518A17000000
    M2 x 0.4 mm4.8 mm36 Ga.
    		2.7 mm8°593518A18000000
    M3 x 0.5 mm6.4 mm13 Ga.
    		4.7 mm8°593518A19000000
    M4 x 0.7 mm7.9 mm5 Ga.
    		5.3 mm8°593518A21000000
    M5 x 0.8 mm9.5 mmD
    		6.2 mm8°593518A22000000
    M6 x 1 mm12.7 mmO
    		8.2 mm8°593518A23000000
    M8 x 1.25 mm14.3 mmX
    		10.2 mm8°593518A24000000
     
    18-8 Stainless Steel
    4-40
    		0.219"9/64"
    		0.141"8°593518A25000000
    6-32
    		0.250"13 Ga.
    		0.185"8°593518A26000000
    8-32
    		0.312"5 Ga.
    		0.208"8°593518A27000000
    10-32
    		0.375"D
    		0.246"8°593518A28000000
    1/4"-20
    		0.500"O
    		0.321"8°593518A29000000
    M3 x 0.5 mm6.4 mm13 Ga.
    		4.7 mm8°593518A31000000
    M4 x 0.7 mm7.9 mm5 Ga.
    		5.3 mm8°593518A32000000
    M5 x 0.8 mm9.5 mmD
    		6.2 mm8°593518A33000000
    M6 x 1 mm12.7 mmO
    		8.2 mm8°593518A34000000
    M8 x 1.25 mm14.3 mmX
    		10.2 mm8°593518A35000000
     

    Helical Threaded Inserts for Pipe Threads

    Image of Product. Bottom orientation. Threaded Inserts. Helical Threaded Inserts for Pipe Threads.
    Repair or strengthen pipe connections by installing these inserts in a tapped hole. Also known as Heli-Coil inserts.
    Installation requires a drill bit, a helical insert tap, and an installation tool.
    Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Inserts
    Through-Hole
    Taps
    Installation
    Tools
    Inserts with
    Installation Tools
    Pipe
    Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Pkg.
    Qty.
    Pkg.
    Each
    Each
    No. of Inserts
    Included
    Each
    Pronged BSPP Thread
     
    18-8 Stainless Steel
    1/8
    		0.188"25/64"
    		0.391"191733A4070000091711A11100000092450A182000000————0
    1/4
    		0.375"17/32"
    		0.531"191733A408000091711A1120000092450A18400000————0
    3/8
    		0.562"43/64"
    		0.672"191733A409000091711A11300000092450A18600000————0
    1/2
    		0.750"27/32"
    		0.844"191733A411000091711A11400000092450A18900000————0
     
    Pronged NPT Thread
     
    18-8 Stainless Steel
    1/8
    		0.273"W
    		0.386"591733A4010000091711A2510000090261A2010000001291733A4210000000
    1/4
    		0.394"33/64"
    		0.516"591733A4020000091711A25200000090261A2020000001291733A422000000
    3/8
    		0.407"21/32"
    		0.656"191733A403000091711A25300000090261A2030000001091733A423000000
    1/2
    		0.534"13/16"
    		0.813"191733A404000091711A25400000090261A2040000001091733A424000000
     

    Ultra-Fine-Thread Press-In Threaded Inserts For Plastic

    Image of Product. Bottom orientation. Threaded Inserts. Ultra-Fine-Thread Press-In Threaded Inserts For Plastic.
    Transform an existing hole in plastic into a precision adjustment point. These inserts mate with ultra-fine-threaded screws for machining setups and other equipment where accuracy matters. Install in a drilled hole using an arbor press or similar pressure tool, and friction keeps inserts in place.
    Flanged Profile—Flanges on the insert create a load-bearing surface that prevents cracks or deformation in the base material. They also curb overtightening and keep inserts from getting pulled out or through.
    Brass—Conductive and nonmagnetic, these inserts are useful for electrical applications. They resist moisture but aren't as strong as steel inserts.
    Flange
    Thread Size
    Installed
    Lg.
    Dia.
    Thick.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Each
    Flanged Profile
     
    Brass
    6-80
    		0.250"1/4"0.03"7/32"
    		0.219"98625A62400000
    6-80
    		0.375"1/4"0.03"7/32"
    		0.219"98625A8470000
    3/16"-100
    		0.313"0.29"0.01"1/4"
    		0.250"98625A3200000
    3/16"-100
    		0.438"0.29"0.01"1/4"
    		0.250"98625A3300000
    3/16"-100
    		0.625"0.29"0.01"1/4"
    		0.250"98625A3400000
    3/16"-100
    		0.750"0.29"0.01"1/4"
    		0.250"98625A3500000
    1/4"-80
    		0.313"0.352"0.01"5/16"
    		0.313"98625A9500000
    1/4"-80
    		0.438"0.352"0.01"5/16"
    		0.313"98625A9600000
    1/4"-80
    		0.625"0.352"0.01"5/16"
    		0.313"98625A9700000
    1/4"-80
    		0.750"0.352"0.01"5/16"
    		0.313"98625A9800000
    1/4"-100
    		0.313"0.352"0.01"5/16"
    		0.313"98625A5860000
    1/4"-100
    		0.438"0.352"0.01"5/16"
    		0.313"98625A5910000
    1/4"-100
    		0.625"0.352"0.01"5/16"
    		0.313"98625A5990000
    1/4"-100
    		0.750"0.352"0.01"5/16"
    		0.313"98625A6020000
    M2.5 x 0.2 mm7 mm4.5 mm0.5 mm4 mm
    		4 mm98625A8480000
    M3 x 0.2 mm5 mm4.95 mm0.25 mm4.5 mm
    		4.5 mm98625A8790000
    M3 x 0.2 mm7 mm4.95 mm0.25 mm4.5 mm
    		4.5 mm98625A8920000
    M3 x 0.2 mm9 mm4.95 mm0.25 mm4.5 mm
    		4.5 mm98625A9650000
    M3 x 0.25 mm5 mm4.95 mm0.25 mm4.5 mm
    		4.5 mm98625A8490000
    M3 x 0.25 mm7 mm4.95 mm0.25 mm4.5 mm
    		4.5 mm98625A8520000
    M3 x 0.25 mm9 mm4.95 mm0.25 mm4.5 mm
    		4.5 mm98625A8580000
     

    Hammer-In Threaded Inserts for Softwood

    Image of Product. Bottom orientation. Threaded Inserts. Hammer-In Threaded Inserts for Softwood.
    Barbs on these inserts dig into softwood for a secure hold. The flange keeps them from being pulled through the material and adds a load-bearing surface. They’re good for light duty assemblies that don't need the precise fit of tapping inserts, such as furniture and shop fixtures. Hammer inserts into a drilled hole to install. The installed length includes the flange.
    Zinc Alloy—Soft enough to cut into wood without splitting it, these inserts also resist occasional moisture.
    Flange
    Thread
    Size
    Installed
    Lg.
    Dia.
    Thick.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Pkg.
    Qty.
    Pkg.
    Zinc Alloy
    8-32
    		0.453"0.413"0.059"1/4"
    		0.250"5090267A693000000
    10-24
    		0.472"0.492"0.079"5/16"
    		0.313"5090267A69500000
    1/4"-20
    		0.610"0.571"0.098"3/8"
    		0.375"2590267A69700000
    5/16"-18
    		0.529"0.741"0.079"3/8"
    		0.375"2590267A69800000
    5/16"-18
    		0.890"3/4"0.07"7/16"
    		0.438"2590267A70500000
     

    Closed-End Key-Locking Threaded Inserts for Soft Metal

    Image of Product. Bottom orientation. Threaded Inserts. Closed-End Key-Locking Threaded Inserts for Soft Metal.
    Image of Product. Shown In Cross Section. Side1 orientation. Threaded Inserts. Closed-End Key-Locking Threaded Inserts for Soft Metal.

    Shown

    In

    Cross

    Section

    Keep threads clear and prevent leaks. These inserts have a closed end that blocks debris and fluids from entering parts. Keys drive into soft metal, such as aluminum, so they don’t slip or rotate in the hole. Comparable to Keensert inserts, they’re more secure than thread-locking inserts.
    To install, drill and tap a hole in your material. Then, thread the insert onto the installation tool and screw it into the hole. Place the tool over the keys and hit it with a hammer to drive them in.
    Standard Wall—Stronger than thin-wall inserts, these are your go-to choice for threading most holes.
    Thin Wall—Use these inserts near the edge of workpieces or wherever you only have space for a small hole. They're also lighter than standard and extra-thick wall inserts for applications with strict weight limitations.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Inserts
    Installation
    Tools
    Thread
    Size
    For Tap Thread
    Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    No. of Locking
    Keys
    Specs. Met
    Each
    Each
    Standard Wall
     
    18-8 Stainless Steel
    10-32
    		3/8"-16
    		0.563"Q
    		0.332"2MIL-I-4591493508A240000000———0
    1/4"-20
    		7/16"-14
    		0.625"X
    		0.397"2MIL-I-4591493508A2500000093904A525000000
    5/16"-18
    		1/2"-13
    		0.750"29/64"
    		0.453"4MIL-I-4591493508A2600000093904A53500000
    3/8"-16
    		9/16"-12
    		0.813"33/64"
    		0.516"4MIL-I-4591493508A2700000093904A54500000
    3/8"-24
    		9/16"-12
    		0.813"33/64"
    		0.516"4MIL-I-4591493508A28000000———0
     
    Thin Wall
     
    18-8 Stainless Steel
    2-56
    		8-32
    		0.250"29 Ga.
    		0.134"2MIL-I-4591493508A1100000093904A15000000
    4-40
    		10-32
    		0.313"20 Ga.
    		0.161"2MIL-I-4591493508A1200000093904A25000000
    6-32
    		12-28
    		0.375"3/16"
    		0.187"2MIL-I-4591493508A1300000093904A35000000
    8-32
    		1/4"-28
    		0.438"1 Ga.
    		0.228"2MIL-I-4591493508A1400000093904A45000000
    10-24
    		5/16"-18
    		0.500"I
    		0.272"2MIL-I-4591493508A1500000093904A60500000
    10-32
    		5/16"-18
    		0.500"I
    		0.272"2MIL-I-4591493508A16000000———0
    1/4"-20
    		3/8"-16
    		0.625"Q
    		0.332"2MIL-I-4591493508A1700000093904A61500000
    1/4"-28
    		3/8"-16
    		0.625"Q
    		0.332"2MIL-I-4591493508A18000000———0
    5/16"-18
    		7/16"-14
    		0.750"X
    		0.397"4MIL-I-4591493508A1900000093904A62500000
    5/16"-24
    		7/16"-14
    		0.750"X
    		0.397"4MIL-I-4591493508A21000000———0
    3/8"-16
    		1/2"-13
    		0.813"29/64"
    		0.453"4MIL-I-4591493508A2200000093904A63500000
    1/2"-13
    		5/8"-11
    		1.063"37/64"
    		0.578"4MIL-I-4591493508A2300000093904A64500000
     

    Seize-Resistant Swage-Locking Threaded Inserts

    Image of Product. Bottom orientation. Threaded Inserts. Seize-Resistant Swage-Locking Threaded Inserts.
    Image of Specification. Front orientation. Contains Annotated. Threaded Inserts. Seize-Resistant Swage-Locking Threaded Inserts.
    Smoothly install these inserts for strong threads near the edges and corners of soft metal surfaces. They’re lubricated to prevent sticking as you thread them in. Since these have thinner walls than our key-locking and thread-locking inserts, they don’t need as much space and won't bulge or crack the material. The knurls press (swage) into the material to keep inserts in place when you tighten or loosen a screw.
    To install these inserts, you need a drill bit, a counterbore, a standard tap, an installation tool, and a hammer. Drill a hole, counterbore the top, and tap it. Place the insert into the installation tool, then hand-tighten it into the tapped hole. Strike the tool to secure the insert and drive the knurls into the surrounding material.
    High-Strength Dry-Film-Lubricated Cadmium-Plated Alloy Steel—Stronger than our 17-4 PH stainless steel inserts, these inserts absorb impact without cracking and stand up to high-pressure applications. The cadmium plating prevents corrosion in wet environments.
    Inserts
    Installation
    Tools
    For
    Counterbore
    Thread
    Size
    For Tap Thread
    Size
    Installed
    Lg.
    For Max.
    Hole Dia.
    Dia.
    Dp.
    Mil. Spec.
    Each
    Each
    High-Strength Dry-Film-Lubricated Cadmium-Plated Alloy Steel
    2-56
    		6-40
    		0.141"0.113"0.138"0.045"MIL-DTL-45932/193572A101000006645N1010000000
    4-40
    		8-32
    		0.203"0.140"0.164"0.052"MIL-DTL-45932/193572A10200006645N102000000
    6-32
    		10-32
    		0.219"0.166"0.187"0.065"MIL-DTL-45932/193572A10300006645N103000000
    8-32
    		12-28
    		0.250"0.191"0.216"0.065"MIL-DTL-45932/193572A10400006645N104000000
    10-24
    		1/4"-28
    		0.297"0.221"0.25"0.082"MIL-DTL-45932/193572A10500006645N105000000
    10-32
    		1/4"-28
    		0.297"0.221"0.25"0.082"MIL-DTL-45932/193572A10600006645N105000000
    1/4"-20
    		5/16"-24
    		0.391"0.281"0.312"0.082"MIL-DTL-45932/193572A10700006645N106000000
    1/4"-28
    		5/16"-24
    		0.391"0.281"0.312"0.082"MIL-DTL-45932/193572A10800006645N106000000
    5/16"-18
    		3/8"-24
    		0.484"0.343"0.375"0.082"MIL-DTL-45932/193572A10900006645N107000000
    5/16"-24
    		3/8"-24
    		0.484"0.343"0.375"0.082"MIL-DTL-45932/193572A111000006645N107000000
    3/8"-16
    		7/16"-20
    		0.563"0.404"0.437"0.113"MIL-DTL-45932/193572A112000006645N108000000
    3/8"-24
    		7/16"-20
    		0.563"0.404"0.437"0.113"MIL-DTL-45932/193572A113000006645N108000000
    7/16"-14
    		1/2"-20
    		0.672"0.468"0.5"0.113"MIL-DTL-45932/193572A114000006645N109000000
    7/16"-20
    		1/2"-20
    		0.672"0.468"0.5"0.113"MIL-DTL-45932/193572A115000006645N109000000
    1/2"-13
    		9/16"-24
    		0.750"0.531"0.562"0.113"MIL-DTL-45932/193572A116000006645N111000000
    1/2"-20
    		9/16"-24
    		0.750"0.531"0.562"0.113"MIL-DTL-45932/193572A117000006645N111000000
    9/16"-12
    		11/16"-120.844"0.625"0.687"0.15"MIL-DTL-45932/193572A118000006645N112000000
    9/16"-18
    		11/16"-120.844"0.625"0.687"0.15"MIL-DTL-45932/193572A119000006645N112000000
    5/8"-11
    		3/4"-16
    		0.953"0.703"0.75"0.156"MIL-DTL-45932/193572A121000006645N113000000
    5/8"-18
    		3/4"-16
    		0.953"0.703"0.75"0.156"MIL-DTL-45932/193572A122000006645N113000000
    3/4"-10
    		7/8"-20
    		1.125"0.844"0.875"0.156"MIL-DTL-45932/193572A123000006645N114000000
    3/4"-16
    		7/8"-20
    		1.125"0.844"0.875"0.156"MIL-DTL-45932/193572A124000006645N114000000
     

    Screw-Locking Thread-Locking Threaded Inserts

    Image of Product. Bottom orientation. Threaded Inserts. Screw-Locking Thread-Locking Threaded Inserts.
    Adhesive on both the internal and external threads keeps these inserts in place and holds screws tight. Also known as E-Z Lok, they use Loctite® adhesive that reaches full strength after 72 hours. Inserts have thick walls for strength and can be used to fill large holes with stripped threads.
    After drilling and tapping your hole, install inserts with a wrench or an installation bit. To use a wrench, thread an insert and two hex nuts onto a bolt. Then, grip and turn the top nut to drive into the hole. You can also use a slotted screwdriver.
    Standard Wall—Stronger than thin-wall inserts, these are your go-to choice for threading most holes.
    Black Phosphate-Coated Steel—These inserts resist occasional moisture.
    Inserts
    Installation
    Tools
    Thread
    Size
    For Tap Thread
    Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Drive
    Style
    Each
    Each
    Standard Wall
     
    Black Phosphate-Coated Steel
    10-24
    		3/8"-16
    		0.406"5/16"
    		0.313"Slotted
    		96137A1100000094110A130000000
    10-32
    		3/8"-16
    		0.406"5/16"
    		0.313"Slotted
    		96137A120000094110A13000000
    1/4"-20
    		7/16"-14
    		0.438"23/64"
    		0.359"Slotted
    		96137A130000094110A14000000
    5/16"-18
    		1/2"-13
    		0.484"27/64"
    		0.422"Slotted
    		96137A140000094110A15000000
    3/8"-16
    		9/16"-12
    		0.516"31/64"
    		0.484"Slotted
    		96137A150000094110A16000000
    1/2"-13
    		3/4"-10
    		0.656"21/32"
    		0.656"Slotted
    		96137A160000094110A18000000
     

    Lubricant-Free Screw-Locking Seize-Resistant Helical Threaded Inserts

    Image of Product. Bottom orientation. Threaded Inserts. Lubricant-Free Screw-Locking Seize-Resistant Helical Threaded Inserts.
    Keep screws from getting stuck or backing out with inserts that also won’t contaminate areas such as clean rooms and labs. Inserts are made of Nitronic 60 stainless steel, so you don’t need lubricant or coatings to prevent wear from repeated installation. They have irregularly shaped threads that grip the screw to resist loosening under vibration. Also known as Heli-Coil inserts.
    Installation requires a drill bit, a helical insert tap, and an installation tool.
    Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.
    Inserts
    Through-Hole
    Taps
    Closed-End
    Hole Taps
    Installation
    Tools
    Prong
    Break-Off Tools
    Thread
    Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Pkg.
    Qty.
    Pkg.
    Each
    Each
    Each
    Each
    Pronged
     
    Nitronic 60 Stainless Steel
    2-56
    		0.086"41 Ga.
    		0.096"596246A50300000091709A09800000091709A40100000090261A14000000092955A1010000000
    2-56
    		0.129"41 Ga.
    		0.096"596246A5170000091709A0980000091709A4010000090261A1400000092955A101000000
    4-40
    		0.112"31 Ga.
    		0.120"596246A545000091709A1010000091709A4070000090261A15100000092955A103000000
    4-40
    		0.168"31 Ga.
    		0.120"596246A559000091709A1010000091709A4070000090261A15100000092955A103000000
    4-40
    		0.224"31 Ga.
    		0.120"596246A573000091709A1010000091709A4070000090261A15100000092955A103000000
    6-32
    		0.138"25 Ga.
    		0.150"596246A587000091709A1020000091709A4160000090261A15200000092955A10500000
    6-32
    		0.207"25 Ga.
    		0.150"596246A601000091709A1020000091709A4160000090261A15200000092955A10500000
    8-32
    		0.164"16 Ga.
    		0.177"596246A629000091709A1030000091709A4220000090261A15300000092955A10700000
    8-32
    		0.246"16 Ga.
    		0.177"596246A643000091709A1030000091709A4220000090261A15300000092955A10700000
    8-32
    		0.328"16 Ga.
    		0.177"596246A6570000091709A1030000091709A4220000090261A15300000092955A10700000
    10-24
    		0.190"5 Ga.
    		0.206"596246A671000091709A1040000091709A4280000090261A15400000092955A10900000
    10-24
    		0.285"5 Ga.
    		0.206"596246A6850000091709A1040000091709A4280000090261A15400000092955A10900000
    10-32
    		0.190"13/64"
    		0.203"596246A699000091709A1510000091709A4310000090261A16100000092955A10900000
    10-32
    		0.285"13/64"
    		0.203"596246A713000091709A1510000091709A4310000090261A16100000092955A10900000
    1/4"-20
    		0.250"H
    		0.266"596246A727000091709A1050000091709A4370000090261A15500000092955A11100000
    1/4"-20
    		0.375"H
    		0.266"596246A7410000091709A1050000091709A4370000090261A15500000092955A11100000
    1/4"-20
    		0.500"H
    		0.266"596246A7550000091709A1050000091709A4370000090261A15500000092955A11100000
    5/16"-18
    		0.312"Q
    		0.332"596246A7690000091709A1060000091709A4430000090261A15600000092955A113000000
    5/16"-18
    		0.469"Q
    		0.332"596246A7830000091709A1060000091709A4430000090261A15600000092955A113000000
    5/16"-18
    		0.625"Q
    		0.332"596246A7970000091709A1060000091709A4430000090261A15600000092955A113000000
     

    Self-Aligning Key-Locking Threaded Inserts for Soft Metal

    Image of Product. Bottom orientation. Threaded Inserts. Self-Aligning Key-Locking Threaded Inserts for Soft Metal.
    Align threads with off-center parts. These inserts have floating threads that shift slightly so you can insert screws at a slight angle as you fasten two parts together. They're comparable to Keensert inserts.
    To install, drill and tap a hole in your material. Then, thread the insert onto the installation tool and screw it into the hole. Place the tool over the keys and hit it with a hammer to drive them in.
    Standard Wall—Stronger than thin-wall inserts, these are your go-to choice for threading most holes.
    Thin Wall—Use these inserts near the edge of workpieces or wherever you only have space for a small hole. They're also lighter than standard and extra-thick wall inserts for applications with strict weight limitations.
    High-Strength Cadmium-Plated Alloy Steel—These inserts have the strength to stand up to high-pressure applications and a plating that helps screws thread in smoothly.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Inserts
    Installation
    Tools
    Thread
    Size
    For Tap Thread
    Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    No. of Locking
    Keys
    Each
    Each
    Standard Wall
     
    High-Strength Cadmium-Plated Alloy Steel
    10-24
    		7/16"-20
    		0.375"13/32"
    		0.406"293522A1050000006642N1050000000
    10-32
    		7/16"-20
    		0.375"13/32"
    		0.406"293522A106000006642N105000000
    1/4"-20
    		1/2"-20
    		0.375"15/32"
    		0.468"293522A10700000———0
    1/4"-28
    		1/2"-20
    		0.375"15/32"
    		0.468"293522A10800000———0
    5/16"-18
    		5/8"-18
    		0.500"37/64"
    		0.578"493522A109000006642N107000000
    5/16"-24
    		5/8"-18
    		0.500"37/64"
    		0.578"493522A111000006642N107000000
    3/8"-16
    		3/4"-16
    		0.625"45/64"
    		0.703"493522A112000006642N108000000
    3/8"-24
    		3/4"-16
    		0.625"45/64"
    		0.703"493522A113000006642N108000000
    7/16"-14
    		7/8"-14
    		0.688"53/64"
    		0.828"493522A114000006642N109000000
    7/16"-20
    		7/8"-14
    		0.688"53/64"
    		0.828"493522A115000006642N109000000
    1/2"-13
    		1"-12
    		0.750"15/16"
    		0.937"493522A116000006642N111000000
    1/2"-20
    		1"-12
    		0.750"15/16"
    		0.937"493522A117000006642N111000000
     
    Thin Wall
     
    18-8 Stainless Steel
    2-56
    		1/4"-28
    		0.188"1 Ga.
    		0.228"293522A101000006642N101000000
    4-40
    		5/16"-24
    		0.313"I
    		0.272"293522A102000006642N102000000
    6-32
    		3/8"-24
    		0.375"Q
    		0.332"293522A103000006642N103000000
    8-32
    		3/8"-24
    		0.375"Q
    		0.332"293522A104000006642N104000000
     

    Closed-End Hammer-In Threaded Inserts for Softwood

    Image of Product. Bottom orientation. Threaded Inserts. Closed-End Hammer-In Threaded Inserts for Softwood.
    Block liquid and debris from getting into threads and parts. The flange on the closed end keeps these inserts from being pulled through the material. Hammer them into a drilled hole in softwood and the barbs will dig in for a secure hold. The installed length includes the flange.
    Zinc Alloy—Soft enough to cut into wood without splitting it, these inserts also resist occasional moisture.
    Flange
    Thread
    Size
    Installed
    Lg.
    Dia.
    Thick.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Pkg.
    Qty.
    Pkg.
    Zinc Alloy
    8-32
    		0.443"0.433"0.098"1/4"
    		0.250"5091316A150000000
    10-24
    		0.492"0.433"0.098"1/4"
    		0.250"5091316A16500000
    10-32
    		0.492"0.433"0.098"1/4"
    		0.250"5091316A18000000
    1/4"-20
    		0.620"0.669"0.21"11/32"
    		0.344"2591316A18500000
    1/4"-20
    		0.694"0.669"0.083"11/32"
    		0.344"2591316A20000000
    5/16"-18
    		0.687"0.669"0.085"11/32"
    		0.344"2591316A21500000
     

    Twist-Resistant Tee-Nut Threaded Inserts for Softwood

    Image of Product. Bottom orientation. Threaded Inserts. Twist-Resistant Tee-Nut Threaded Inserts for Softwood.
    Six prongs around the flange grab softwood for the strongest hold against twisting and loosening. Hammer them into a drilled hole to install. The installed length includes the flange.
    Zinc-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Barrel
    Flange
    Thread
    Size
    Installed
    Lg.
    Dia.
    Lg.
    Dia.
    Thick.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    10-24
    		0.320"0.243"9/32"3/4"0.039"1/4"
    		0.250"10090975A133000000
    10-24
    		0.477"0.243"7/16"45/64"0.039"1/4"
    		0.250"10090975A13800000
    10-32
    		0.320"0.243"9/32"3/4"0.039"1/4"
    		0.250"10090975A14300000
    10-32
    		0.350"0.236"5/16"45/64"0.039"1/4"
    		0.250"5090975A3380000
    10-32
    		0.477"0.243"7/16"45/64"0.039"1/4"
    		0.250"10090975A14800000
    1/4"-20
    		0.300"0.305"1/4"3/4"0.047"5/16"
    		0.313"2590975A3600000
    1/4"-20
    		0.360"0.305"5/16"3/4"0.047"5/16"
    		0.313"10090975A15300000
    1/4"-20
    		0.485"0.305"7/16"3/4"0.047"5/16"
    		0.313"10090975A15800000
    1/4"-20
    		0.610"0.305"9/16"3/4"0.047"5/16"
    		0.313"2590975A3370000
    3/8"-16
    		0.501"0.44"7/16"1"0.063"29/64"
    		0.453"5090975A16300000
     
    18-8 Stainless Steel
    10-24
    		0.320"0.243"9/32"45/64"0.039"1/4"
    		0.250"2593789A11000000
    1/4"-20
    		0.485"0.305"7/16"3/4"0.047"5/16"
    		0.313"2593789A12000000
     

    Left-Hand-Thread Helical Threaded Inserts

    Image of Product. Bottom orientation. Threaded Inserts. Left-Hand-Thread Helical Threaded Inserts.
    Fix threads in parts that rotate counterclockwise. Pair these inserts with left-hand-thread screws and turn them to the left to tighten. Also known as Heli-Coil inserts.
    Installation requires a drill bit, a helical insert tap, and an installation tool.
    Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Inserts
    Through-Hole
    Taps
    Installation
    Tools
    Prong
    Break-Off Tools
    Inserts with
    Installation Tools
    Thread
    Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Pkg.
    Qty.
    Pkg.
    Each
    Each
    Each
    No. of Inserts
    Included
    Each
    Pronged
     
    18-8 Stainless Steel
    1/4"-20
    		0.375"H
    		0.266"192090A1110000092090A31100000092450A17700000092955A111000000692090A627000000
    1/4"-28
    		0.375"6.7 mm
    		6.7 mm192090A115000092090A3150000092450A1770000092955A11100000692090A63100000
    5/16"-18
    		0.469"Q
    		0.332"192090A121000092090A3210000092450A1780000092955A113000000692090A63300000
    5/16"-24
    		0.469"21/64"
    		0.328"192090A123000092090A3230000092450A1790000092955A121000000692090A63500000
    3/8"-16
    		0.562"X
    		0.397"192090A127000092090A3270000092450A1810000092955A115000000692090A63900000
    3/8"-24
    		0.562"25/64"
    		0.391"192090A131000092090A3310000092450A1810000092955A123000000692090A64300000
    1/2"-13
    		0.750"17/32"
    		0.531"192090A143000092090A3430000092450A1830000092955A119000000492090A647000000
    1/2"-20
    		0.750"33/64"
    		0.516"192090A147000092090A3470000092450A1830000092955A127000000492090A651000000
    5/8"-11
    		0.938"21/32"
    		0.656"192090A151000092090A3510000092450A18500000———0292090A655000000
    5/8"-18
    		0.938"41/64"
    		0.641"192090A155000092090A3550000092450A18500000———0292090A659000000
    3/4"-10
    		1.125"25/32"
    		0.781"192090A1590000092090A35900000092450A18600000———0292090A663000000
     
    Extraction Tools
    Remove installed helical inserts.
    For Pronged Helical Inserts—Place the tip into pronged inserts and lightly strike the tool’s head. Then, turn the tool counterclockwise with pressure to extract the insert.
    For Thread Size
    Each
    For Pronged Helical Inserts
    10-24, 10-32, 12-24, 12-28, 1/4"-20, 1/4"-28, 1/4"-32, 1/4"-80, 5/16"-18, 5/16"-24, 5/16"-32, 3/8"-16, 3/8"-24, M5, M6, M7, M8, M10
    		90254A320000000
    7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 1/2"-28, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 5/8"-24, 3/4"-10, 3/4"-16, 3/4"-20, 7/8"-9, 7/8"-14, 7/8"-20, 1"-8, 1"-12, 1"-14, M12, M14, M16, M18, M20, M22, M24
    		90254A33000000
     

    Heat-Set Threaded Insert Assortments with Installation Tools

    Image of Product. Front orientation. Threaded Inserts. Heat-Set Threaded Insert Assortments with Installation Tools.
    Keep a variety of heat-set insert sizes and installation tools on hand. Press inserts into straight holes that have been drilled, printed, or molded into your plastic part. Once installed, heat the insert with a soldering tip to melt the surrounding plastic.
    Flanged Profile—Flanges on the insert create a load-bearing surface that prevents cracks or deformation in the base material. They also curb overtightening and keep inserts from getting pulled out or through.
    Brass—Conductive and nonmagnetic, these inserts are useful for electrical applications. They resist moisture but aren't as strong as steel inserts.
    No. of Inserts
    Included
    Includes
    Drill Bit Size
    For Max. Hole Dia.
    Each
    Standard Profile
     
    Brass
    200¼"-20 Thread × ½" Installed Lg. (25 Each)
    4-40 Thread × 0.226" Installed Lg. (50 Each)
    6-32 Thread × 0.281" Installed Lg. (50 Each)
    8-32 Thread × 0.321" Installed Lg. (50 Each)
    10-32 Thread × ⅜" Installed Lg. (25 Each)
    Installation Tips    		7/32"
    6.4 mm
    8 mm
    22 Ga.
    12 Ga.
    		0.157"
    0.189"
    0.220"
    0.252"
    0.315"    		97338A160000000
     
    Flanged Profile
     
    Brass
    200¼"-20 Thread × ½" Installed Lg. (25 Each)
    4-40 Thread × 0.226" Installed Lg. (50 Each)
    6-32 Thread × 0.281" Installed Lg. (50 Each)
    8-32 Thread × 0.321" Installed Lg. (50 Each)
    10-32 Thread × ⅜" Installed Lg. (25 Each)
    Installation Tips    		7/32"
    6.4 mm
    8 mm
    22 Ga.
    12 Ga.
    		0.157"
    0.189"
    0.220"
    0.252"
    0.315"    		97338A15000000
     

    Tapping Threaded Insert Assortments for Hardwood

    Image of Product. Front orientation. Threaded Inserts. Tapping Threaded Insert Assortments for Hardwood.
    A variety of inserts that tap holes in hardwood as you install them. Also known as knife-thread inserts, they have sharp threads that cut through material for a secure hold. Install using a drill and installation bit (not included).
    Brass—Conductive and nonmagnetic, these inserts are useful for electrical applications. They resist moisture but aren't as strong as steel inserts.
    No. of Inserts
    Included
    Includes
    Drill Bit Size
    For Max. Hole
    Dia.
    Drive
    Style
    Each
    Brass
    601/4"-20 Thread × 1/2" Installed Lg. (10 Each)
    3/8"-16 Thread × 5/8" Installed Lg. (10 Each)
    5/16"-18 Thread × 5/8" Installed Lg. (10 Each)
    6-32 Thread × 3/8" Installed Lg. (10 Each)
    8-32 Thread × 3/8" Installed Lg. (10 Each)
    10-32 Thread × 33/64" Installed Lg. (10 Each)    		1/4"
    3/8"
    1/2"
    		1/4"
    3/8"
    1/2"    		Slotted
    		92038A249000000
     

    Flush-Profile Hammer-In Threaded Inserts for Softwood

    Image of Product. Bottom orientation. Threaded Inserts. Flush-Profile Hammer-In Threaded Inserts for Softwood.
    Mount these inserts even with or below the surface to conceal them or fit tight spaces. Hammer inserts into a drilled hole in softwood and the barbs will dig in for a secure hold.
    Zinc Alloy—Soft enough to cut into wood without splitting it, these inserts also resist occasional moisture.
    Thread
    Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Pkg.
    Qty.
    Pkg.
    Zinc Alloy
    8-32
    		0.315"1/4"
    		0.250"5090267A563000000
    8-32
    		0.394"1/4"
    		0.250"5090267A56700000
    10-24
    		0.394"5/16"
    		0.313"5090267A56800000
    10-32
    		0.512"5/16"
    		0.313"5090267A81100000
    1/4"-20
    		0.394"3/8"
    		0.375"5090267A57100000
    1/4"-20
    		0.512"3/8"
    		0.375"5090267A57200000
     

    Tapping Threaded Insert Assortments for Softwood

    Image of Product. Front orientation. Threaded Inserts. Tapping Threaded Insert Assortments for Softwood.
    These assortments include various sizes of inserts that don’t need a tapped hole. The large external threads cut into and grab softwood for a strong hold. Install inserts with a hex driver or use a drill and an installation bit (not included) to get the job done faster.
    Flanged Profile—Flanges on the insert create a load-bearing surface that prevents cracks or deformation in the base material. They also curb overtightening and keep inserts from getting pulled out or through.
    Zinc Alloy—Soft enough to cut into wood without splitting it, these inserts also resist occasional moisture.
    Flange
    Drive
    No. of Inserts
    Included
    Includes
    Body Lg.
    Dia.
    Thick.
    Drill Bit Size
    For Max. Hole Dia.
    Style
    Size, mm
    Each
    Standard Profile
     
    Zinc Alloy
    501/4"-20 Thread × 0.516" Installed Lg. (10 Each)
    5/16"-18 Thread × 0.781" Installed Lg. (10 Each)
    8-32 Thread × 0.391" Installed Lg. (10 Each)
    10-24 Thread × 0.516" Installed Lg. (10 Each)
    10-32 Thread × 0.516" Installed Lg. (10 Each)    		———15/64"
    9/32"
    23/64"
    7/16"
    		15/64"
    9/32"
    23/64"
    7/16"    		Hex
    		4, 5, 6, 892039A249000000
     
    Flanged Profile
     
    Zinc Alloy
    481/4"-20 Thread x 0.512" Installed Lg. (10 Each)
    3/8"-16 Thread x 0.984" Installed Lg. (8 Each)
    5/16"-18 Thread x 0.512" Installed Lg. (10 Each)
    8-32 Thread x 0.394" Installed Lg. (10 Each)
    10-24 Thread x 0.394" Installed Lg. (10 Each)    		0.37"
    0.374"
    0.481"
    0.488"
    0.953"    		0.329"
    0.433"
    0.469"
    0.567"
    0.626"    		0.02"
    0.024"
    0.031"    		15/64"
    9/32"
    23/64"
    7/16"
    15/32"
    		15/64"
    9/32"
    23/64"
    7/16"
    15/32"    		Hex
    		4, 5, 6, 8, 1092039A10100000
     

    Tapping Threaded Insert Assortments for Soft Metal

    Image of Product. Front orientation. Threaded Inserts. Tapping Threaded Insert Assortments for Soft Metal.
    Cut a variety of thread sizes into aluminum and other soft metal—no taps required. These inserts cut their own threads and lock into material, so they won’t budge when you install or remove a screw. To install inserts with a wrench, thread an insert and two hex nuts onto a bolt. Then, grip and turn the top nut to drive into a drilled hole. If you need to add a lot of threaded connections quickly, use an installation tool (not included) with a ratchet wrench or drill press. These inserts are comparable to Tap-Lok inserts.
    Zinc-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.
    No. of Inserts
    Included
    Includes
    Drill Bit Size
    For Max. Hole Dia.
    Each
    Zinc-Plated Steel
    40Drill Bits
    M6x1.0 mm Thread x 12 mm Installed Lg. (10 Each)
    M8x1.25 mm Thread x 14 mm Installed Lg. (10 Each)
    M10x1.5 mm Thread x 18 mm Installed Lg. (10 Each)
    M12x1.75 mm Thread x 22 mm Installed Lg. (10 Each)    		7/16"
    33/64"
    L
    U
    		0.290"
    0.368"
    0.438"
    0.516"    		93491A1400000000
    501/2"-13 Thread x 0.945" Installed Lg. (10 Each)
    1/4"-20 Thread x 0.472" Installed Lg. (10 Each)
    3/8"-16 Thread x 0.709" Installed Lg. (10 Each)
    5/16"-18 Thread x 0.551" Installed Lg. (10 Each)
    7/16"-14 Thread x 0.866" Installed Lg. (10 Each)    		7/16"
    33/64"
    19/32"
    43/64"
    V
    		0.377"
    0.438"
    0.516"
    0.594"
    0.672"    		93491A110000000
    501/2"-13 Thread x 0.945" Installed Lg. (10 each)
    1/4"-20 Thread x 0.472" Installed Lg. (10 Each)
    3/8"-16 Thread x 0.709" Installed Lg. (10 Each)
    5/16"-18 Thread x 0.551" Installed Lg. (10 Each)
    7/16"-14 Thread x 0.866" Installed Lg. (10 Each)
    Drill Bits    		7/16"
    33/64"
    19/32"
    L
    U
    		0.290"
    0.368"
    0.438"
    0.516"
    0.594"    		93491A130000000
    70M3.5x0.6 mm Thread x 8 mm Installed Lg. (5 Each)
    M3x0.5 mm Thread x 6 mm Installed Lg. (5 Each)
    M4x0.7 mm Thread x 8 mm Installed Lg. (5 Each)
    M5x0.8 mm Thread x 10 mm Installed Lg. (10 Each)
    M6×1 mm Thread × 12 mm Installed Lg. (10 Each)
    M8x1.25 mm Thread x 14 mm Installed Lg. (10 Each)
    M10x1.5 mm Thread x 18 mm Installed Lg. (10 Each)
    M12x1.75 mm Thread x 22 mm Installed Lg. (10 Each)
    M14x2.0 mm Thread x 24 mm Installed Lg. (5 Each)    		3/16"
    19/64"
    7/16"
    33/64"
    19/32"
    43/64"
    2 Ga.
    B
    V
    		0.188"
    0.221"
    0.238"
    0.297"
    0.377"
    0.438"
    0.516"
    0.594"
    0.672"    		93491A120000000
     

    Push-to-Expand Press-In Threaded Inserts for Plastic

    Image of Product. Front orientation. Threaded Inserts. Push-to-Expand Press-In Threaded Inserts for Plastic.
    Even before a screw is installed, these inserts expand to hold firm in plastic. Press an installation tool inside the insert and the spreader plate flares the knurled section. These are stronger than other press-in inserts, but screw-to-expand inserts are better for repeated disassembly.
    Brass—Conductive and nonmagnetic, these inserts are useful for electrical applications. They resist moisture but aren't as strong as steel inserts.
    Inserts
    Installation
    Tools
    Thread
    Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Pkg.
    Qty.
    Pkg.
    Each
    Standard Profile
     
    Brass
    4-40
    		0.250"5/32"
    		0.156"5093415A02100000093735A2010000000
    6-32
    		0.313"3/16"
    		0.188"5093415A0310000093735A40100000
    6-32
    		0.375"3/16"
    		0.188"5093415A0340000093735A40200000
    8-32
    		0.313"7/32"
    		0.219"5093415A0420000093735A50100000
    8-32
    		0.375"7/32"
    		0.219"5093415A0440000093735A50200000
    10-24
    		0.375"1/4"
    		0.250"2593415A0520000093735A60100000
    10-24
    		0.438"1/4"
    		0.250"2593415A0540000093735A60200000
    10-32
    		0.375"1/4"
    		0.250"2593415A0610000093735A60100000
    10-32
    		0.438"1/4"
    		0.250"2593415A0630000093735A60200000
    1/4"-20
    		0.500"5/16"
    		0.313"1093415A0710000093735A701000000
     

    Helical Threaded Inserts For Spark Plug Repair

    Image of Product. For Gasket Seats. Front orientation. Threaded Inserts. Helical Threaded Inserts For Spark Plug Repair.
    Image of Product. For Gasket and Taper Seats. Front orientation. Threaded Inserts. Helical Threaded Inserts For Spark Plug Repair, Through-Hole Tap, Installation Tool.

    For Gasket Seats

    For Gasket and

    Taper Seats

    Replace stripped spark plugs in engines. These kits include helical inserts that fit common hole sizes, plus a tap and an installation tool. Also known as Heli-Coil inserts.
    Inserts For Gasket Seats—Use these helical inserts in spark plug ports with a gasket. They cannot be used with taper seat ports.
    Inserts For Gasket and Taper Seats—Although they're designed to fit in taper seat spark plug ports, you can also use these inserts in ports with a gasket seat.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Thread Size
    Thread
    Spacing
    No. of Inserts
    Included
    Includes
    Each
    Inserts For Gasket Seats
     
    18-8 Stainless Steel
    M14 x 1.25 mmExtra Fine
    		30Installation Tool
    M14×1.25 mm Thread × 0.472" Insert Reach (6 Each)
    M14×1.25 mm Thread × 1/2" Insert Reach (6 Each)
    M14×1.25 mm Thread × 3/4" Insert Reach (6 Each)
    M14×1.25 mm Thread × 3/8" Insert Reach (6 Each)
    M14×1.25 mm Thread × 7/16" Insert Reach (6 Each)
    Through-Hole Tap    		91732A0910000000
    M18 x 1.5 mmFine
    		24Installation Tool
    M18×1.5 mm Thread × 1/2" Insert Reach (24 Each)
    Through-Hole Tap    		91732A055000000
     
    Inserts For Gasket and Taper Seats
     
    18-8 Stainless Steel
    M14 x 1.25 mmExtra Fine
    		3Installation Tool
    M14×1.25 mm Thread × Long Insert Reach (1 Each)
    M14×1.25 mm Thread × Normal Insert Reach (1 Each)
    M14×1.25 mm Thread × Short Insert Reach (1 Each)
    Through-Hole Tap    		91732A09500000
    M14 x 1.25 mmExtra Fine
    		18Installation Tool
    M14×1.25 mm Thread × Long Insert Reach (6 Each)
    M14×1.25 mm Thread × Normal Insert Reach (6 Each)
    M14×1.25 mm Thread × Short Insert Reach (6 Each)
    Through-Hole Tap    		91732A097000000
     

    Strong-Grip Tee-Nut Threaded Inserts for Softwood

    Image of Product. Bottom orientation. Threaded Inserts. Strong-Grip Tee-Nut Threaded Inserts for Softwood.
    Excellent holding power, even when removing screws. The hooked prongs on these inserts resist pullout by piercing and gripping softwood, such as particleboard. Hammer them into a drilled hole to install. The installed length includes the flange.
    Zinc-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.
    Barrel
    Thread
    Size
    Installed
    Lg.
    Dia.
    Lg.
    Flange
    Thk.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    10-24
    		0.414"0.28"3/8"0.039"1/4"
    		0.250"5090244A316000000
    10-32
    		0.477"0.28"7/16"0.039"1/4"
    		0.250"5090244A31900000
    1/4"-20
    		0.426"0.35"3/8"0.051"5/16"
    		0.313"5090244A32500000
    1/4"-20
    		0.610"0.34"9/16"0.047"5/16"
    		0.313"5090244A32900000
    5/16"-18
    		0.676"0.37"5/8"0.05"3/8"
    		0.375"5090244A33700000
     

    Screw-Locking Tee-Nut Threaded Inserts for Wood

    Image of Product. Bottom orientation. Threaded Inserts. Screw-Locking Tee-Nut Threaded Inserts for Wood.
    Prevent vibration from loosening screws. These inserts have irregularly shaped threads that grip screws as you tighten them. The four prongs on the flange keep the insert from twisting in hardwood and softwood. To install, hammer into a drilled hole. The installed length includes the flange.
    Zinc-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.
    Barrel
    Flange
    Thread
    Size
    Installed
    Lg.
    Dia.
    Lg.
    Dia.
    Thick.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    1/4"-20
    		0.360"0.305"5/16"3/4"0.047"5/16"
    		0.313"5093766A200000000
    1/4"-20
    		0.481"0.305"7/16"3/4"0.043"5/16"
    		0.313"5093766A30000000
    3/8"-16
    		0.501"0.44"7/16"1"0.063"29/64"
    		0.453"2593766A50000000
     

    Helical Threaded Inserts for Pipe Threads with Installation Tools

    Image of Product. Front orientation. Threaded Inserts. Helical Threaded Inserts for Pipe Threads with Installation Tools.
    Fix stripped pipe threads fast—these inserts come with drill bits, through-hole taps, and installation tools. Also known as Heli-Coil inserts.
    Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Pipe
    Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    No. of Inserts
    Included
    Includes
    Each
    Pronged NPT Thread
     
    18-8 Stainless Steel
    1/8
    		0.273"3/8"
    		0.375"12Drill Bit
    Installation Tool
    Through-Hole Tap    		91733A4210000000
    1/4
    		0.394"33/64"
    		0.516"12Drill Bit
    Installation Tool
    Through-Hole Tap    		91733A422000000
    3/8
    		0.407"21/32"
    		0.656"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91733A423000000
    1/2
    		0.534"13/16"
    		0.813"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91733A424000000
     

    Left-Hand Thread Helical Threaded Inserts with Installation Tools

    Image of Product. Front orientation. Threaded Inserts. Left-Hand Thread Helical Threaded Inserts with Installation Tools.
    Save time when repairing threads in parts that rotate counterclockwise—these inserts come with installation tools. Pair them with left-hand-thread screws, and turn them the left to tighten. Also known as Heli-Coil inserts.
    Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Thread
    Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    No. of Inserts
    Included
    Includes
    Each
    Pronged
     
    18-8 Stainless Steel
    1/4"-20
    		0.375"17/64"
    		0.266"6Installation Tool
    Through-Hole Tap    		92090A627000000
    1/4"-28
    		0.375"17/64"
    		0.266"6Installation Tool
    Through-Hole Tap    		92090A63100000
    5/16"-18
    		0.469"21/64"
    		0.328"6Installation Tool
    Through-Hole Tap    		92090A63300000
    5/16"-24
    		0.469"21/64"
    		0.328"6Installation Tool
    Through-Hole Tap    		92090A63500000
    3/8"-16
    		0.562"25/64"
    		0.391"6Installation Tool
    Through-Hole Tap    		92090A63900000
    3/8"-24
    		0.562"25/64"
    		0.391"6Installation Tool
    Through-Hole Tap    		92090A64300000
    1/2"-13
    		0.750"17/32"
    		0.531"4Installation Tool
    Through-Hole Tap    		92090A647000000
    1/2"-20
    		0.750"33/64"
    		0.516"4Installation Tool
    Through-Hole Tap    		92090A651000000
    5/8"-11
    		0.938"21/32"
    		0.656"2Installation Tool
    Through-Hole Tap    		92090A655000000
    5/8"-18
    		0.938"41/64"
    		0.641"2Installation Tool
    Through-Hole Tap    		92090A659000000
    3/4"-10
    		1.125"25/32"
    		0.781"2Installation Tool
    Through-Hole Tap    		92090A663000000
     
    back to top