The threaded head on these arbors holds a grinding cone.

Attach cutoff wheels, grinding wheels, and other abrasive wheels to hand-held drills and die grinders.

The arbor’s shank attaches to hand-held drills and die grinders. Threads on the body hold the sanding roll in place.

Use flap wheels with a threaded stud in tools that accept a shank.

Mount wheel brushes that have an arbor hole to hand-held drills and die grinders.

Install cutoff wheels, grinding wheels, and other abrasive discs to the threaded shaft on bench-top motors, grinders, and buffers.

Use these arbors to mount buffing wheels, grinding wheels and other abrasive discs to the tapered shaft on bench-top motors, grinders, and buffers.

This drum is required to use a sanding sleeve with a Dremel grinder.

No tools required—twist the drum head by hand to tighten the sanding sleeve to the drum.

Mount a sanding sleeve to the straight shaft of a bench or pedestal grinder using one of these drums.

The shank on these spindles installs directly into grinder collets and drill chucks.

Mount to the straight shaft on your grinder or buffer.