How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
About Plastic
More
Drain, Waste, and Vent ABS Pipe for Chemicals
![](/prerenderstable/mvPRE/contents/gfx/imagecache/160/1608t501-@halfx_637696276345633641.png?ver=imagenotfound)
- For Use With: Sodium Hydroxide
- Max. Temperature: 140° F
- Fittings: Use Schedule 40 ABS Plastic
- Flanges: Use Schedule 40 ABS Plastic
Use this Schedule 40 pipe as an economical option for gravity-flow chemical waste systems. Pipe is ABS plastic, which has excellent strength and impact resistance and good chemical resistance. Connect to unthreaded female socket-connect fittings using ABS cement (also known as solvent weld).
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
5 ft. | 10 ft. | ||||||||
---|---|---|---|---|---|---|---|---|---|
Pipe Size | OD | ID | Wall Thick. | Material | Color | Each | Each | ||
1 1/2 | 1 29/32" | 1.61" | 0.145" | ABS Plastic | Black | 00000000 | 000000 | 00000000 | 000000 |
2 | 2 3/8" | 2.067" | 0.154" | ABS Plastic | Black | 00000000 | 00000 | 00000000 | 00000 |
3 | 3 1/2" | 3.068" | 0.216" | ABS Plastic | Black | 00000000 | 00000 | 00000000 | 000000 |
4 | 4 1/2" | 4.026" | 0.237" | ABS Plastic | Black | 00000000 | 000000 | 00000000 | 000000 |
Pipe Cement (8 fl. oz. Can) | 00000000 | Each | 00000 |
Impact-Resistant Easy-to-Form ABS Tubes
- Color: Black
- Max. Temperature: 140° F
- Tensile Strength: 4,200-5,100 psi (Poor)
- Impact Strength: 6.3-7.7 ft.-lbs./in. (Excellent)
- Hardness: Rockwell R101-R109 (Hard)
- For Use Outdoors: No
- Specifications Met: UL 94 HB
Slide wires and cords through these tubes for 360° protection from impact. ABS is easily thermoformed and provides more resistance to impact than polycarbonate. These tubes have an oversized OD and undersized ID to allow for finishing to the sizes listed.
For technical drawings and 3-D models, click on a part number.
T-Slotted Framing Caps, Covers, and Seals
Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/470/47065t87p1-i02f-digital@halfx_637057428626150023.png?ver=imagenotfound)
End caps protect the ends of rails from damage and keep out dust and grime.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/313/3136n662p2-6575n27@halfx_637970479263688390.png?ver=imagenotfound)
End caps protect the ends of rails from damage and keep out dust and grime.
For Rail Ht. | Angle | Material | Color | Each | |
Push In | |||||
---|---|---|---|---|---|
40mm | 45° | ABS Plastic | Black | 00000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/313/3136n664-6575n166-@halfx_637970618176973563.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/313/3136n533-@halfx_1692967401.png?ver=imagenotfound)
End caps protect the ends of rails from damage and keep out dust and grime.
For Rail Ht. | Material | Color | Each | |
Push In | ||||
---|---|---|---|---|
1 1/2" | ABS Plastic | Black | 00000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/470/47065t92p1-i02f-digital@halfx_637057403027851191.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/470/47065t982p1-i02f-digital@halfx_637057415081489476.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/470/47065t911p1-i02f-digital@halfx_637057447299216293.png?ver=imagenotfound)
Seals cover door gaps and rail end connections to keep out air and dust.
Brush seals fill gaps with their flexible bristles. Press them into a T-slot.
For Rail Ht. | Bristle | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Single | Double, Quad | Triple | For T-Slot Wd. | Lg., ft. | Wd. | Projection | Lg. | Material | Material | Color | Each | |
1 | 3", 80mm | 4 | 0.32", 8mm | 3 1/4 | 1/2" | 1 9/16" | 1 9/16" | Nylon Plastic | ABS Plastic | Black | 000000000 | 000000 |