McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    223 Products

    Adhesive-Mount Heat Sheets

    Stick these flexible heat sheets to container surfaces to warm contents without direct contact. They require a temperature switch or controller (not included) to regulate heat output.
    Note: Do not cut, crease, or overlap these sheets—this will damage the heating element. Use a roller during installation to remove air pockets and ensure direct surface contact. Once these sheets have been applied to a surface, they cannot be removed and reused.
    Rectangle
    Image of ProductInUse. Front orientation. Heating Pads. Adhesive-Mount Heat Sheets, Rectangle.
    2.5 W/in² Watt Density—For gentle warming, choose sheets with a watt density of 2.5 watts per square inch.
    5 W/in² Watt Density—Sheets with a watt density of 5 watts per square inch are good for general purpose heating.
    10 W/in² Watt Density—For rapid warm-up and high-temperature applications, choose sheets with a watt density of 10 watts per square inch.
    Adhesive Back—Adhesive-back sheets have a pressure-sensitive adhesive.
    Overall
    Adhesive Back
    Lg.
    Wd.
    Thk.
    Wattage,
    W
    Voltage
    Electrical
    Phase
    Current,
    amp
    Max. Heat
    Output, ° F
    Material
    Environment
    Temp. Range, ° F
    Wire Lead
    Lg.
    For Surface Material
    Each
    2.5 W/in² Watt Density
    3"1"0.07"8120V ACSingle0.1490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K265000000
    5"1"0.07"13120V ACSingle0.1490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K26600000
    5"2"0.07"25120V ACSingle0.2490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K27300000
    5"3"0.07"38120V ACSingle0.3490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K27500000
    5"4"0.07"50120V ACSingle0.4490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K28100000
    6"1"0.07"15120V ACSingle0.1490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K26700000
    6"2"0.07"30120V ACSingle0.3490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K27400000
    6"3"0.07"45120V ACSingle0.4490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K27600000
    9"1"0.07"23120V ACSingle0.2490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K26800000
    9"3"0.07"68120V ACSingle0.6490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K28900000
    9"6"0.07"135120V ACSingle1.2490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K282000000
    12"1"0.07"30120V ACSingle0.3490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K26900000
    12"2"0.07"60120V ACSingle0.5490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K63200000
    12"3"0.07"90120V ACSingle0.8490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K277000000
    12"6"0.07"180120V ACSingle1.6490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K283000000
    12"9"0.07"270120V ACSingle2.4490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K286000000
    18"1"0.07"45120V ACSingle0.4490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K27100000
    18"3"0.07"135120V ACSingle1.2490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K278000000
    18"6"0.07"270120V ACSingle2.4490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K284000000
    18"12"0.07"540120V ACSingle4.7490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K287000000
    24"1"0.07"60120V ACSingle0.5490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K27200000
    24"2"0.07"120120V ACSingle1490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K642000000
    24"3"0.07"180120V ACSingle1.6490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K279000000
    24"6"0.07"360120V ACSingle3.1490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K285000000
    24"12"0.07"720120V ACSingle6.3490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K288000000
    30"1"0.07"75120V ACSingle0.7490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K62200000
    36"6"0.07"540120V ACSingle4.7490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K672000000
    48"12"0.07"1,440120V ACSingle12.5490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K682000000
     
    5 W/in² Watt Density
    1"2"0.07"1012V DCSingle0.8490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic7945T4200000
    1"2"0.07"1024V DCSingle0.4490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic7945T6200000
    1"3"0.07"1512V DCSingle1.3490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic7945T4300000
    1"3"0.07"1524V DCSingle0.6490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic7945T6300000
    1"4"0.056"2012V DCSingle1.7355Silicone Rubber
    -40 to 30012"Metal7945T38100000
    1"4"0.056"2024V DCSingle0.8355Silicone Rubber
    -40 to 30012"Metal7945T38200000
    1"5"0.07"2512V DCSingle2.1490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic7945T4400000
    1"5"0.07"2524V DCSingle1490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic7945T6400000
    1"6"0.056"3012V DCSingle2.5355Silicone Rubber
    -40 to 30012"Metal7945T47100000
    1"6"0.056"3024V DCSingle1.3355Silicone Rubber
    -40 to 30012"Metal7945T47200000
    1"9"0.056"4524V DCSingle1.9355Silicone Rubber
    -40 to 30012"Metal7945T49200000
    1"12"0.056"6024V DCSingle2.5355Silicone Rubber
    -40 to 30012"Metal7945T5800000
    1"18"0.031"9024V DCSingle3.8355Silicone Rubber
    -40 to 30012"Metal7945T6700000
    2"1"0.07"10120V ACSingle0.1490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K36400000
    2"5"0.07"5012V DCSingle4.2490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic7945T4500000
    2"5"0.07"5024V DCSingle2.1490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic7945T6500000
    2"6"0.07"6012V DCSingle5490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic7945T4600000
    2"6"0.07"6024V DCSingle2.5490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic7945T6600000
    2"12"0.056"12024V DCSingle5355Silicone Rubber
    -40 to 30012"Metal7945T6900000
    3"1"0.07"15120V ACSingle0.1490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K36500000
    3"5"0.056"7512V DCSingle6.3355Silicone Rubber
    -40 to 30012"Metal7945T74100000
    3"5"0.056"7524V DCSingle3.1355Silicone Rubber
    -40 to 30012"Metal7945T74200000
    3"6"0.056"9012V DCSingle7.5355Silicone Rubber
    -40 to 30012"Metal7945T76100000
    3"6"0.056"9024V DCSingle3.8355Silicone Rubber
    -40 to 30012"Metal7945T76200000
    3"9"0.056"13512V DCSingle11.3355Silicone Rubber
    -40 to 30012"Metal7945T78100000
    3"9"0.056"13524V DCSingle5.6355Silicone Rubber
    -40 to 30012"Metal7945T78200000
    3"12"0.056"18024V DCSingle7.5355Silicone Rubber
    -40 to 30012"Metal7945T81000000
    3"18"0.056"27024V DCSingle11.3355Silicone Rubber
    -40 to 30012"Metal7945T83000000
    4"5"0.056"10012V DCSingle8.3355Silicone Rubber
    -40 to 30012"Metal7945T87100000
    4"5"0.056"10024V DCSingle4.2355Silicone Rubber
    -40 to 30012"Metal7945T87200000
    4"6"0.056"12012V DCSingle10355Silicone Rubber
    -40 to 30012"Metal7945T89100000
    4"6"0.056"12024V DCSingle5355Silicone Rubber
    -40 to 30012"Metal7945T89200000
    4"12"0.056"24024V DCSingle10355Silicone Rubber
    -40 to 30012"Metal7945T92000000
    5"1"0.07"25120V ACSingle0.2490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K36600000
    5"2"0.07"50120V ACSingle0.4490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K37300000
    5"3"0.07"75120V ACSingle0.7490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K37500000
    5"4"0.07"100120V ACSingle0.9490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K38100000
    6"1"0.07"30120V ACSingle0.3490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K36700000
    6"2"0.07"60120V ACSingle0.5490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K37400000
    6"3"0.07"90120V ACSingle0.8490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K37600000
    6"9"0.056"27024V DCSingle11.3355Silicone Rubber
    -40 to 30012"Metal7945T96000000
    9"1"0.07"45120V ACSingle0.4490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K36800000
    9"3"0.07"135120V ACSingle1.2490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K38900000
    9"6"0.07"270120V ACSingle2.4490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K382000000
    12"1"0.07"60120V ACSingle0.5490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K36900000
    12"2"0.07"120120V ACSingle1490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K63300000
    12"3"0.07"180120V ACSingle1.6490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K377000000
    12"6"0.07"360120V ACSingle3.1490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K383000000
    12"9"0.07"540120V ACSingle4.7490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K386000000
    18"1"0.07"90120V ACSingle0.8490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K37100000
    18"3"0.07"270120V ACSingle2.4490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K378000000
    18"6"0.07"540120V ACSingle4.7490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K384000000
    18"12"0.07"1,080120V ACSingle9.4490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K387000000
    24"1"0.07"120120V ACSingle1490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K37200000
    24"2"0.07"240120V ACSingle2.1490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K643000000
    24"3"0.07"360120V ACSingle3.1490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K379000000
    24"6"0.07"720120V ACSingle6.3490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K385000000
    24"12"0.07"1,440120V ACSingle12.5490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K388000000
    30"1"0.07"150120V ACSingle1.3490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K623000000
    36"6"0.07"1,080120V ACSingle9.4490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K673000000
    48"12"0.07"2,880120V ACSingle20490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K683000000
     
    10 W/in² Watt Density
    2"1"0.07"20120V ACSingle0.2490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K46400000
    3"1"0.07"30120V ACSingle0.3490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K46500000
    5"1"0.07"50120V ACSingle0.4490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K46600000
    5"2"0.07"100120V ACSingle0.9490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K47300000
    5"3"0.07"150120V ACSingle1.3490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K47500000
    5"4"0.07"200120V ACSingle1.7490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K48100000
    6"1"0.07"60120V ACSingle0.5490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K46700000
    6"2"0.07"120120V ACSingle1490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K47400000
    6"3"0.07"180120V ACSingle1.6490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K47600000
    9"1"0.07"90120V ACSingle0.8490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K46800000
    9"3"0.07"270120V ACSingle2.4490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K48900000
    9"6"0.07"540120V ACSingle4.7490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K482000000
    12"1"0.07"120120V ACSingle1490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K46900000
    12"2"0.07"240120V ACSingle2.1490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K63400000
    12"3"0.07"360120V ACSingle3.1490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K477000000
    12"6"0.07"720120V ACSingle6.3490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K483000000
    12"9"0.07"1,080120V ACSingle9.4490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K486000000
    18"1"0.07"180120V ACSingle1.6490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K47100000
    18"3"0.07"540120V ACSingle4.7490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K478000000
    18"6"0.07"1,080120V ACSingle9.4490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K484000000
    18"12"0.07"2,160120V ACSingle18.8490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K487000000
    24"1"0.07"240120V ACSingle2.1490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K47200000
    24"2"0.07"480120V ACSingle4.2490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K644000000
    24"3"0.07"720120V ACSingle6.3490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K479000000
    24"6"0.07"1,440120V ACSingle12.5490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K485000000
    30"1"0.07"300120V ACSingle2.6490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K624000000
    36"6"0.07"2,160120V ACSingle18.8490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K674000000
     
    Square
    Image of ProductInUse. Front orientation. Heating Pads. Adhesive-Mount Heat Sheets, Square.
    2.5 W/in² Watt Density—For gentle warming, choose sheets with a watt density of 2.5 watts per square inch.
    5 W/in² Watt Density—Sheets with a watt density of 5 watts per square inch are good for general purpose heating.
    10 W/in² Watt Density—For rapid warm-up and high-temperature applications, choose sheets with a watt density of 10 watts per square inch.
    Adhesive Back—Adhesive-back sheets have a pressure-sensitive adhesive.
    Overall
    Adhesive Back
    Lg.
    Wd.
    Thk.
    Wattage,
    W
    Voltage
    Electrical
    Phase
    Current,
    amp
    Max. Heat
    Output, ° F
    Material
    Environment
    Temp. Range, ° F
    Wire Lead
    Lg.
    For Surface Material
    Each
    2.5 W/in² Watt Density
    3"3"0.07"23120V ACSingle0.2490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K227000000
    6"6"0.07"90120V ACSingle0.8490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K22800000
    9"9"0.07"203120V ACSingle1.8490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K229000000
    10"10"0.07"250120V ACSingle2.2490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K612000000
    12"12"0.07"360120V ACSingle3.1490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K263000000
     
    5 W/in² Watt Density
    2"2"0.07"2012V DCSingle1.7490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic7945T4100000
    2"2"0.07"2024V DCSingle0.8490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic7945T6100000
    3"3"0.056"4512V DCSingle3.8355Silicone Rubber
    -40 to 30012"Metal7945T72100000
    3"3"0.056"4524V DCSingle1.9355Silicone Rubber
    -40 to 30012"Metal7945T72200000
    3"3"0.07"45120V ACSingle0.4490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K32700000
    4"4"0.056"8012V DCSingle6.7355Silicone Rubber
    -40 to 30012"Metal7945T85100000
    4"4"0.056"8024V DCSingle3.3355Silicone Rubber
    -40 to 30012"Metal7945T85200000
    6"6"0.056"18012V DCSingle15355Silicone Rubber
    -40 to 30012"Metal7945T94100000
    6"6"0.056"18024V DCSingle7.5355Silicone Rubber
    -40 to 30012"Metal7945T94200000
    6"6"0.07"180120V ACSingle1.6490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K328000000
    9"9"0.07"405120V ACSingle3.5490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K329000000
    10"10"0.07"500120V ACSingle4.4490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K613000000
    12"12"0.07"720120V ACSingle6.3490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K363000000
     
    10 W/in² Watt Density
    3"3"0.07"90120V ACSingle0.8490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K42700000
    6"6"0.07"360120V ACSingle3.1490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K428000000
    9"9"0.07"810120V ACSingle7490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K429000000
    10"10"0.07"1,000120V ACSingle8.7490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K614000000
    12"12"0.07"1,440120V ACSingle12.5490Silicone Rubber
    -70 to 45012"Fiberglass, Metal, Plastic35765K463000000
     

    Plastic Sheet Benders

    Image of ProductInUse. Steel Frame Sheet Bender Shown in Use. Front orientation. Plastic Sheet Benders. Steel Frame.

    Steel Frame Sheet Bender Shown

    in Use

    Image of Product. Front orientation. Plastic Sheet Benders. Steel Frame.

    Steel Frame

    Image of Product. Front orientation. Plastic Sheet Benders. Aluminum Frame.

    Aluminum Frame

    These benders are compatible with plastics such as acrylic, polyethylene, polypropylene, polycarbonate, PVC, CPVC, ABS, and Kydex. Place a sheet between the heating bars to soften it. Heating time varies between 30 seconds and 12 minutes based on material type and thickness. Use wood or metal supports (not included) under the sheet during heating.
    400° F Maximum Temperature—Benders with a maximum temperature of 400° include a dial for smooth and precise temperature adjustments. All have an aluminum frame.
    V-Groove Attachments—V-groove attachment creates sharp, nonradius 90° bends in polypropylene and polyethylene sheets by melting a deep groove in the material. Excess material forms a raised edge along the inside of the bend to reinforce the angle.
    Sheet Benders
    V-Groove
    Attachments
    Electrical
    Max. Bending
    Wd.
    For Max.
    Sheet Thk.
    Ht.
    Wd.
    Dp.
    Max. Temp.,
    ° F
    Connection
    No. of
    Blades
    Voltage,
    V AC
    Cord Lg.,
    ft.
    Features
    Certification
    Each
    Each
    Steel Frame
    24"1/2"1 1/4"35"4"800Straight Blade3120523845A330000000———0
    48"1/2"1 1/4"59"4"800Straight Blade3120523845A34000000———0
    48"1/2"5"53"7"450Straight Blade31207 1/2On/Off Switch, Pilot Light, Thermostat ControlCSA Certified
    23845A12000000———0
    72"1/2"1 1/4"83"4"800Straight Blade3120523845A35000000———0
    96"1/2"1 1/4"107"4"800Straight Blade3120523845A36000000———0
     
    Aluminum Frame
    48"1/2"4"64"2"400Straight Blade31206On/Off Switch, Thermostat Control2370A21000000002370A31000000
    96"1/2"4"114"2"400Straight Blade31206On/Off Switch, Thermostat Control2370A22000000002370A32000000
     
    Replacements for Plastic Sheet Benders

    Ultra-Thin Heat Sheets

    Less than 0.015″ thick and highly conformable, these heat sheets warm components in tight spaces within complex designs. You need a temperature switch or controller (not included) to regulate their heat output.
    Note: Do not cut, crease, or overlap these sheets—this will damage the heating element. Use a roller during installation to remove air pockets and ensure direct surface contact. Once these sheets have been applied, they cannot be removed or reused.
    Rectangle
    Image of Product. Bottom orientation. Heating Pads. Ultra-Thin Heat Sheets, Rectangle.
    5 W/in² Watt Density—Sheets with a watt density of 5 watts per square inch are good for general purpose heating.
    10 W/in² Watt Density—For rapid warm-up and high-temperature jobs, use sheets with a watt density of 10 watts per square inch.
    20 W/in² Watt Density—Choose sheets with a watt density of 20 watts per square inch for your highest-temperature applications, such as starting chemical reactions and altering the viscosity of liquids.
    Adhesive Back—Stick them to surfaces with their adhesive back.
    Polyimide—Made of polyimide, these sheets emit minimal gas and won’t leave an oil residue, which means you can use them in vacuum systems.
    Overall
    Adhesive Back
    Lg.
    Wd.
    Thk.
    Wattage,
    W
    Voltage,
    V AC
    Electrical
    Phase
    Current,
    amp
    Max. Heat
    Output, ° F
    Material
    Environment
    Temp. Range, ° F
    Wire Lead
    Lg.
    For Surface
    Material
    Each
    5 W/in² Watt Density
    2"1/2"0.008"528Single0.17350Polyimide-20 to 35012"Metal, Plastic35475K982000000
    2"1"0.008"1028Single0.35350Polyimide-20 to 35012"Metal, Plastic35475K92200000
    3"1"0.008"1528Single0.53350Polyimide-20 to 35012"Metal, Plastic35475K94200000
    5"1"0.008"2528Single0.89350Polyimide-20 to 35012"Metal, Plastic35475K66200000
    5"1"0.008"25120Single0.2350Polyimide-20 to 35012"Metal, Plastic35475K76200000
    5"2"0.008"50120Single0.4350Polyimide-20 to 35012"Metal, Plastic35475K82200000
    5 1/2"4"0.008"110120Single0.91350Polyimide-20 to 35012"Metal, Plastic35475K95200000
    11"5 1/2"0.008"302120Single2.5350Polyimide-20 to 35012"Metal, Plastic35475K972000000
    11"10"0.008"550120Single4.58350Polyimide-20 to 35012"Metal, Plastic35475K782000000
     
    10 W/in² Watt Density
    2"1/2"0.008"1028Single0.35350Polyimide-20 to 35012"Metal, Plastic35475K98300000
    2"1"0.008"2028Single0.71350Polyimide-20 to 35012"Metal, Plastic35475K92300000
    3"1"0.008"3028Single1.07350Polyimide-20 to 35012"Metal, Plastic35475K94300000
    3"1"0.008"30120Single0.25350Polyimide-20 to 35012"Metal, Plastic35475K83400000
    5"1"0.008"5028Single1.78350Polyimide-20 to 35012"Metal, Plastic35475K66300000
    5"1"0.008"50120Single0.4350Polyimide-20 to 35012"Metal, Plastic35475K76300000
    5"2"0.008"100120Single0.83350Polyimide-20 to 35012"Metal, Plastic35475K82300000
    5 1/2"4"0.008"220120Single1.83350Polyimide-20 to 35012"Metal, Plastic35475K95300000
    11"5 1/2"0.008"605120Single5.04350Polyimide-20 to 35012"Metal, Plastic35475K973000000
    11"10"0.008"1,100120Single9.16350Polyimide-20 to 35012"Metal, Plastic35475K783000000
     
    20 W/in² Watt Density
    2 1/2"1/2"0.008"2028Single0.71350Polyimide-20 to 35012"Metal, Plastic35765K91500000
    2 1/2"1"0.008"4028Single1.42350Polyimide-20 to 35012"Metal, Plastic35765K91200000
    3 1/2"1"0.008"6028Single2.14350Polyimide-20 to 35012"Metal, Plastic35765K91600000
    5 1/2"1"0.008"10028Single3.57350Polyimide-20 to 35012"Metal, Plastic35765K91400000
    5 1/2"3"0.008"300120Single2.5350Polyimide-20 to 35012"Metal, Plastic35765K91800000
     
    Square
    Image of Product. Bottom orientation. Heating Pads. Ultra-Thin Heat Sheets, Square.
    5 W/in² Watt Density—Sheets with a watt density of 5 watts per square inch are good for general purpose heating.
    10 W/in² Watt Density—For rapid warm-up and high-temperature jobs, use sheets with a watt density of 10 watts per square inch.
    20 W/in² Watt Density—Choose sheets with a watt density of 20 watts per square inch for your highest-temperature applications, such as starting chemical reactions and altering the viscosity of liquids.
    Adhesive Back—Stick them to surfaces with their adhesive back.
    Polyimide—Made of polyimide, these sheets emit minimal gas and won’t leave an oil residue, which means you can use them in vacuum systems.
    Overall
    Adhesive Back
    Lg.
    Wd.
    Thk.
    Wattage,
    W
    Voltage,
    V AC
    Electrical
    Phase
    Current,
    amp
    Max. Heat
    Output, ° F
    Material
    Environment
    Temp. Range, ° F
    Wire Lead
    Lg.
    For Surface Material
    Each
    5 W/in² Watt Density
    1"1"0.008"528Single0.17350Polyimide-20 to 35012"Metal, Plastic35475K842000000
    2"2"0.008"2028Single0.71350Polyimide-20 to 35012"Metal, Plastic35475K96200000
    2"2"0.008"20120Single0.17350Polyimide-20 to 35012"Metal, Plastic35475K86200000
    2"2"0.008"40120Single0.33350Polyimide-20 to 35012"Metal, Plastic35475K86300000
    3"3"0.006"45120Single0.38300Polyimide-40 to 30012"Fiberglass, Metal, Plastic35475K182000000
    5 1/2"5 1/2"0.006"151120Single1.26300Polyimide-40 to 30012"Fiberglass, Metal, Plastic35475K632000000
     
    10 W/in² Watt Density
    1"1"0.008"1028Single0.35350Polyimide-20 to 35012"Metal, Plastic35475K84300000
    2"2"0.008"4028Single1.42350Polyimide-20 to 35012"Metal, Plastic35475K96300000
    3"3"0.008"90120Single0.75350Polyimide-20 to 35012"Metal, Plastic35475K88300000
    5 1/2"5 1/2"0.006"302120Single2.52300Polyimide-40 to 30012"Fiberglass, Metal, Plastic35475K633000000
     
    20 W/in² Watt Density
    1 1/2"1"0.008"2028Single0.71350Polyimide-20 to 35012"Metal, Plastic35765K91100000
    2 1/2"2"0.008"8028Single2.84350Polyimide-20 to 35012"Metal, Plastic35765K91300000
    3 1/2"3"0.008"180120Single6.42350Polyimide-20 to 35012"Metal, Plastic35765K91700000
     

    Multisize Conduit and Pipe Bending Blankets

    Image of ProductInUse. Front orientation. Conduit Benders. Multisize Conduit and Pipe Bending Blankets.
    Heat PVC conduit and pipe, then manually bend it to your desired angle. This electric blanket wraps around your workpiece and secures with a hook-and-loop strap.
    Electrical
    For Rigid Conduit
    Trade Size
    For Pipe Size
    For Use
    On
    Material
    Lg.
    Wd.
    Connection
    Type
    Connection
    No. of
    Blades
    Voltage,
    V AC
    Cord Lg.,
    ft.
    Each
    1/2, 3/4, 1, 1 1/4, 1 1/2
    1/2, 3/4, 1, 1 1/4, 1 1/2
    PlasticSilicone Rubber/Vinyl Plastic13"8 1/4"Plug InStraight Blade212083236A660000000

    Adhesive-Mount Heat Sheets with Temperature Control

    Image of ProductInUse. Front orientation. Heating Pads. Adhesive-Mount Heat Sheets with Temperature Control.
    An adjustable thermostat senses the container’s surface temperature to automatically control heat output. These heat sheets permanently adhere to container surfaces to warm contents without direct contact.
    Since the thermostat only responds to the container’s surface temperature, the temperature of its contents may be lower. The first time you heat material, monitor its temperature with a thermometer (not included) and record the thermostat setting so you can consistently reach the same temperature in the future.
    Note: Do not cut, crease, or overlap these sheets—this will damage the heating element. Use a roller during installation to remove air pockets and ensure direct surface contact. Once sheets have been applied to a surface, they cannot be removed and reused.
    2.5 W/in² Watt Density—For gentle warming, choose sheets with a watt density of 2.5 watts per square inch.
    5 W/in² Watt Density—Sheets with a watt density of 5 watts per square inch are good for general purpose heating.
    10 W/in² Watt Density—For rapid warm-up and high-temperature applications, choose sheets with a watt density of 10 watts per square inch.
    Adhesive Back—Adhesive-back sheets have a pressure-sensitive adhesive.
    Overall
    Adhesive Back
    Lg.
    Wd.
    Wattage,
    W
    Voltage,
    V AC
    Electrical
    Phase
    Current,
    amp
    Thk.
    Temp. Control
    Range, ° F
    For Surface
    Material
    Material
    Environment
    Temp. Range, ° F
    Each
    Rectangle
     
    2.5 W/in² Watt Density
    5"4"50120Single0.41/4"50 to 425MetalSilicone Rubber
    -60 to 30035765K2030000000
    9"3"68120Single0.61/4"50 to 425MetalSilicone Rubber
    -60 to 30035765K201000000
    9"6"135120Single1.21/4"50 to 425MetalSilicone Rubber
    -60 to 30035765K204000000
    12"3"90120Single0.81/4"50 to 425MetalSilicone Rubber
    -60 to 30035765K202000000
    12"6"180120Single1.61/4"50 to 425MetalSilicone Rubber
    -60 to 30035765K205000000
    18"12"540120Single4.71/4"50 to 425MetalSilicone Rubber
    -60 to 30035765K208000000
    24"6"360120Single3.11/4"50 to 425MetalSilicone Rubber
    -60 to 30035765K207000000
    24"12"720120Single6.31/4"50 to 425MetalSilicone Rubber
    -60 to 30035765K209000000
     
    5 W/in² Watt Density
    5"4"100120Single0.91/4"50 to 425MetalSilicone Rubber
    -60 to 30035765K303000000
    9"3"135120Single1.21/4"50 to 425MetalSilicone Rubber
    -60 to 30035765K301000000
    9"6"270120Single2.41/4"50 to 425MetalSilicone Rubber
    -60 to 30035765K304000000
    12"3"180120Single1.61/4"50 to 425MetalSilicone Rubber
    -60 to 30035765K302000000
    12"6"360120Single3.11/4"50 to 425MetalSilicone Rubber
    -60 to 30035765K305000000
    18"12"1,080120Single9.41/4"50 to 425MetalSilicone Rubber
    -60 to 30035765K308000000
    24"6"720120Single6.31/4"50 to 425MetalSilicone Rubber
    -60 to 30035765K307000000
    24"12"1,440120Single12.51/4"50 to 425MetalSilicone Rubber
    -60 to 30035765K309000000
     
    10 W/in² Watt Density
    5"4"200120Single1.71/4"50 to 425MetalSilicone Rubber
    -60 to 30035765K403000000
    9"3"270120Single2.41/4"50 to 425MetalSilicone Rubber
    -60 to 30035765K401000000
    9"6"540120Single4.71/4"50 to 425MetalSilicone Rubber
    -60 to 30035765K404000000
    12"3"360120Single3.11/4"50 to 425MetalSilicone Rubber
    -60 to 30035765K402000000
    12"6"720120Single6.31/4"50 to 425MetalSilicone Rubber
    -60 to 30035765K405000000
    24"6"1,440120Single12.51/4"50 to 425MetalSilicone Rubber
    -60 to 30035765K407000000
     
    Square
     
    2.5 W/in² Watt Density
    6"6"90120Single0.81/4"50 to 425MetalSilicone Rubber
    -60 to 30035765K902000000
     
    5 W/in² Watt Density
    6"6"180120Single1.61/4"50 to 425MetalSilicone Rubber
    -60 to 30035765K903000000
     
    10 W/in² Watt Density
    6"6"360120Single3.11/4"50 to 425MetalSilicone Rubber
    -60 to 30035765K904000000
     

    Ultra-Flexible Adhesive-Mount Heat Sheets

    Image of ProductInUse. Front orientation. Heating Pads. Ultra-Flexible Adhesive-Mount Heat Sheets.
    Also known as foil heaters, these bend around tank corners and edges without damaging the heating element. They permanently adhere to container surfaces to heat contents without direct contact. Heaters require a temperature switch or controller (sold separately) to regulate heat output.
    Note: Do not cut or overlap these heaters—this will damage the heating element. Use a roller during installation to remove air pockets and ensure direct surface contact. Once heaters have been applied to a surface, they cannot be removed and reused.
    Rectangle
    Adhesive Back—All have a pressure-sensitive adhesive back for easy installation.
    Overall
    Adhesive Back
    Lg.
    Wd.
    Thk.
    Wattage,
    W
    Voltage,
    V AC
    Electrical
    Phase
    Current,
    amp
    Max. Heat
    Output, ° F
    Material
    Environment
    Temp. Range, ° F
    Wire Lead
    Lg.
    For Surface Material
    Each
    2.1 W/in² Watt Density
    6"2"0.2"25120Single0.21300Aluminum Foil-40 to 30018"Fiberglass, Metal, Plastic8009T11000000
     
    2.5 W/in² Watt Density
    6"4"0.2"60120Single0.5300Aluminum Foil-40 to 30018"Fiberglass, Metal, Plastic8009T1400000
    10"2"0.2"50120Single0.42300Aluminum Foil-40 to 30018"Fiberglass, Metal, Plastic8009T1200000
    12"2"0.2"60120Single0.5300Aluminum Foil-40 to 30018"Fiberglass, Metal, Plastic8009T1300000
     
    2.7 W/in² Watt Density
    12"4"0.2"130120Single1.08300Aluminum Foil-40 to 30018"Fiberglass, Metal, Plastic8009T1600000
     
    2.8 W/in² Watt Density
    10"4"0.2"110120Single0.92300Aluminum Foil-40 to 30018"Fiberglass, Metal, Plastic8009T1500000
    10"6"0.2"170120Single1.42300Aluminum Foil-40 to 30018"Fiberglass, Metal, Plastic8009T1800000
    12"6"0.2"205120Single1.71300Aluminum Foil-40 to 30018"Fiberglass, Metal, Plastic8009T1900000
     
    2.9 W/in² Watt Density
    24"6"0.2"420120Single3.5300Aluminum Foil-40 to 30018"Fiberglass, Metal, Plastic8009T21000000
     
    Square
    Adhesive Back—All have a pressure-sensitive adhesive back for easy installation.
    Overall
    Adhesive Back
    Lg.
    Wd.
    Thk.
    Wattage,
    W
    Voltage,
    V AC
    Electrical
    Phase
    Current,
    amp
    Max. Heat
    Output, ° F
    Material
    Environment
    Temp. Range, ° F
    Wire Lead
    Lg.
    For Surface Material
    Each
    2.6 W/in² Watt Density
    6"6"0.2"95120Single0.79300Aluminum Foil-40 to 30018"Fiberglass, Metal, Plastic8009T17000000
     
    back to top