Filter by
For Use On
For Joining
System of Measurement
Maximum Temperature
Formulation
Consistency
Begins to Harden
Manufacturer Model Number
Material
Adhesive Type
Manufacturer Model Name
Shear Strength
Clarity
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Quick-Set Epoxy Structural Adhesives
 |  |
Cartridge | Syringe |
For quick repairs, these epoxies begin to harden in six minutes or less. Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.
These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
Model Number HY4090—A blend of epoxy and instant-bond adhesive for a balance of strength, cure speed, and temperature resistance.
Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
Container | Strength | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength | Shear, psi | Peel | Mix Ratio | Consistency | Viscosity, cP | Temp. Range, ° F | For Joining | Each | |||
Loctite® | |||||||||||||||
| HY4090 | 1.69 | Cartridge | 3 | 7 day | 2,420 | Not Rated | 1:1 | Thick Liquid | 19,000 | -65 to 300 | Composite, Masonry, Metal, Plastic, Rubber, Wood | 6430A424 | 000000 | ||
| HY4090 | 1.69 | Cartridge | 3 | 7 day | 2,420 | Not Rated | 1:1 | Thick Liquid | 19,000 | -65 to 300 | Composite, Masonry, Metal, Plastic, Rubber, Wood | 6430A574 | 00000 | ||
| HY4090 | 13.5 | Cartridge | 3 | 7 day | 2,420 | Not Rated | 1:1 | Thick Liquid | 19,000 | -65 to 300 | Composite, Masonry, Metal, Plastic, Rubber, Wood | 6430A52 | 000000 | ||
J-B Weld | |||||||||||||||
PlasticWeld | |||||||||||||||
| 50132 | 0.85 | Syringe | 5 | 60 min. | 2,000 | Not Rated | 1:1 | Thick Liquid | 9,000 | -20 to 300 | Composite, Masonry, Metal, Plastic, Rubber, Wood | 7605A5 | 0000 | ||
Flexible Instant-Bond Adhesives
 |
Create bonds that can bend without breaking. These adhesives remain elastic even after hardening.
Apply an accelerator first to reach a full-strength bond faster.
Thin Liquid—Seep into narrow gaps and joints that thick-liquid adhesives can't reach. Use when bonding close-fitting parts.
ISO 10993—Comply with biocompatibility standards for medical-grade applications.
%20--%3e%3cg%3e%3cg%20id='Layer_1'%3e%3cpath%20class='cls-1'%20d='M68,27.2c-14.6,0-26.4,11.7-26.4,26.3,0,7,2.8,13.7,7.7,18.7v44.8l18.8-16.1,18.7,16.1v-44.9c10.3-10.3,10.3-27,0-37.3-5-4.9-11.7-7.7-18.7-7.7h0ZM81.3,105l-13.2-11.4-13.2,11.4v-28.7c8.2,4.8,18.3,4.8,26.5,0v28.7ZM76.2,70.8c-5.2,2.5-11.2,2.5-16.4,0-9.5-4.5-13.5-15.9-9-25.4,4.5-9.5,15.9-13.5,25.4-9,9.5,4.5,13.5,15.9,9,25.4-1.9,4-5.1,7.1-9,9Z'/%3e%3cpath%20class='cls-2'%20d='M5.8,95.5c-1.2,0-2.1-1-2.1-2.1,0,0,0,0,0,0V29.4h20.9c2.1,0,3.8-1.7,3.8-3.8V3.7c.2,0,.4,0,.5,0h37.5c1.2,0,2.1,1,2.1,2.1v18.6c1.2,0,2.5.1,3.7.3V5.8C72.2,2.6,69.6,0,66.4,0H28.9c-1.5,0-3,.6-4.1,1.7h-.1c0,.1-23,23.2-23,23.2-1.1,1.1-1.7,2.6-1.7,4.1v64.3c0,3.2,2.6,5.8,5.8,5.8h41.7v-3.7H5.8ZM24.7,7.1v18.7H6L24.7,7.1Z'/%3e%3c/g%3e%3c/g%3e%3c/svg%3e)
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, sec. | Reaches Full Strength, hr. | Consistency | Viscosity, cP | Max. Gap Size Filled | Elongation | Temp. Range, ° F | Specs. Met | For Joining | Each | |||
Loctite® | |||||||||||||||
| 4902 | 0.7 | Bottle | 10 | 24 | Thin Liquid | 200 | 0.004" | 155% | -65 to 180 | ISO 10993 | Ceramic, Composite, Glass, Metal, Plastic, Rubber, Wood | 74795A397 | 000000 | ||
Urethane Structural Adhesives
| |
Cartridge | Syringe |
Urethanes are the most flexible adhesives, so they bond dissimilar materials and damp vibration.
Some of these adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
Paste—Thicker than liquid adhesives but still spreadable—good for filling gaps and covering surfaces.
Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
Container | Strength | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength | Shear, psi | Peel | Mix Ratio | Consistency | Viscosity | Temp. Range, ° F | For Joining | Each | |||
Loctite® | |||||||||||||||
| 5570 | 10.1 | Cartridge | 30 | 7 day | 400 | Not Rated | — | Paste | Not Rated | -40 to 200 | Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood, Metal to Composite, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Glass, Plastic to Masonry, Plastic to Rubber, Rubber to Composite, Rubber to Glass, Rubber to Masonry, Wood to Glass | 6430A798 | 000000 | ||
J-B Weld | |||||||||||||||
Plastic Bonder | |||||||||||||||
| 50139 | 0.85 | Syringe | 6 | 1 hr. | 1,000 | Not Rated | 1:1 | Thick Liquid | 50,000 cP | -20 to 250 | Composite, Masonry, Metal, Plastic, Rubber, Wood, Metal to Composite, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Masonry, Plastic to Rubber, Rubber to Composite, Rubber to Masonry | 7605A6 | 0000 | ||
Machinable Epoxy Structural Adhesives
 |
Stick |
Restore cracked and hole-filled metal workpieces back to usable form with these epoxies. Once cured, you can drill precise holes, tap strong threads, and sand and file the adhesives to tight dimensions. They're steel filled for strength but won't rust.
Epoxies are the strongest and most chemical-resistant adhesives. They bond especially well on metal.
These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
Putty—Slice off a chunk and mold it into the shape you need.
Strength | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Type | Begins to Harden, min. | Reaches Full Strength, min. | Shear, psi | Peel | Consistency | Viscosity | Temp. Range, ° F | For Joining | Each | |||
J-B Weld | |||||||||||||
SteelStik | |||||||||||||
| 8267 | Stick | 5 | 60 | 900 | Not Rated | Putty | Not Rated | -20 to 300 | Composite, Masonry, Metal, Rubber | 7605A2 | 00000 | ||
Flexible Light-Activated Instant-Bond Adhesives
 |
Take your time to precisely align parts before bonding, and maintain flexibility afterward. These adhesives won't harden until you expose them to a compatible light source. They also remain elastic so the bond can bend without breaking.
Thin Liquid—Seep into narrow gaps and joints that thick-liquid adhesives can't reach. Use when bonding close-fitting parts.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, sec. | Reaches Full Strength, min. | Light Intensity Req. to Reach Full Strength | Cure Type | Consistency | Viscosity, cP | Max. Gap Size Filled | Elongation | Temp. Range, ° F | For Joining | Each | |||
| 1.69 | Bottle | 5 | 30 | 5 sec. @ 100 mW/cm² | UV Light | Thin Liquid | 850 | 0.25" | Not Rated | 45 to 80 | Ceramic, Composite, Glass, Metal, Plastic, Rubber | 2454N1 | 000000 | ||
Epoxy Structural Adhesives
|
Stick |
Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.
These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
7524A161 is solvent free. If the adhesive hardens in the tube, soften in warm water before dispensing.
Putty—Slice off a chunk and mold it into the shape you need.
Strength | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Type | Begins to Harden, min. | Reaches Full Strength, hr. | Shear, psi | Peel | Consistency | Viscosity | Temp. Range, ° F | For Joining | Each | |||
J-B Weld | |||||||||||||
HighHeat | |||||||||||||
| 8297 | Stick | 60 | 8 | 900 | Not Rated | Putty | Not Rated | -20 to 450 | Composite, Masonry, Metal, Plastic, Rubber | 7605A3 | 000000 | ||
PlasticWeld | |||||||||||||
| 8237 | Stick | 20 | 24 | 900 | Not Rated | Putty | Not Rated | -20 to 300 | Composite, Masonry, Plastic, Rubber | 7605A1 | 0000 | ||
Acrylic Structural Adhesives
|
Cartridge |
Acrylics bond with the widest range of materials of any adhesive. They adhere to plastic especially well, requiring little surface preparation.
These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
Paste—Thicker than liquid adhesives but still spreadable—good for filling gaps and covering surfaces.
Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
Container | Strength | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Shear, psi | Peel, lbf/in. wd. | Mix Ratio | Consistency | Viscosity, cP | Temp. Range, ° F | For Joining | Each | |||
Loctite® | |||||||||||||||
| H4500 | 1.69 | Cartridge | 15 | 72 | 3,100 | 58 | 10:1 | Thick Liquid | 14,380 | -40 to 210 | Metal, Plastic | 6430A67 | 000000 | ||
| H8000 | 1.69 | Cartridge | 30 | 24 | 2,800 | 45 | 10:1 | Paste | 190,000 | -65 to 250 | Composite, Metal, Plastic | 6430A46 | 00000 | ||
Other Structural Adhesives | |||||||||||||||
| — | 1.69 | Cartridge | 5 | 24 | 3,200 | 7 | 1:1 | Thick Liquid | 64,000 | -40 to 250 | Composite, Masonry, Metal, Plastic, Rubber, Metal to Composite, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Masonry, Rubber to Composite, Rubber to Masonry | 2455N4 | 00000 | ||
| — | 13 1/2 | Cartridge | 5 | 24 | 3,200 | 7 | 1:1 | Thick Liquid | 64,000 | -40 to 250 | Composite, Masonry, Metal, Plastic, Rubber, Metal to Composite, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Masonry, Rubber to Composite, Rubber to Masonry | 2455N3 | 00000 | ||
Light-Activated Instant-Bond Adhesives
|
Take your time positioning parts that require precise alignment, such as optical instruments. Instead of gripping immediately, these adhesives only harden when you expose them to a compatible light source.
Thin Liquid—Seep into narrow gaps and joints that thick-liquid adhesives can't reach. Use when bonding close-fitting parts.
ISO 10993—Comply with biocompatibility standards for medical-grade applications.
Container | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, sec. | Reaches Full Strength, hr. | Light Intensity Req. to Reach Full Strength | Cure Type | Consistency | Viscosity, cP | Max. Gap Size Filled | Temp. Range, ° F | Specs. Met | For Joining | Each | |||
Loctite® | ||||||||||||||||
| 4311 | 1 | Bottle | 5 | 24 | 10 sec. @ 30 mW/cm² | UV Light, Visible Light | Thin Liquid | 1,050 | 0.008" | -65 to 200 | ISO 10993 | Ceramic, Composite, Glass, Metal, Plastic, Rubber, Wood | 1700A5 | 000000 | ||
No-Mix Acrylic Structural Adhesives
 |  |  |
Bottle | Syringe | Tube |
No need to mix these acrylics—apply adhesive to one surface and activator to the other, then join. Acrylics bond with the widest range of materials of any adhesive. They adhere to plastic especially well, requiring little surface preparation.
Model Number 325—Form flexible bonds and withstand rapid changes in temperature.
Paste—Thicker than liquid adhesives but still spreadable—good for filling gaps and covering surfaces.
Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
Container | Strength | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength, hr. | Shear, psi | Peel | Consistency | Viscosity, cP | Temp. Range, ° F | Req. Loctite® Activator No. | For Joining | Each | |||
Loctite® | |||||||||||||||
| 324 | 1.69 | Bottle | 5 min. | 24 | 2,700 | 13 lbf/in. wd. | Thick Liquid | 17,000 | -65 to 350 | 7075, 7387 | Glass, Metal, Plastic, Rubber, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Glass, Plastic to Rubber, Rubber to Glass | 7614A11 | 000000 | ||
| 325 | 1.69 | Bottle | 5 min. | 24 | 1,600 | Not Rated | Thick Liquid | 20,000 | -65 to 300 | 7075, 7387 | Glass, Metal, Plastic, Rubber | 7614A111 | 00000 | ||
| 331 | 0.9 | Syringe | 20 sec. | 24 | 3,100 | 19 lbf/in. wd. | Thick Liquid | 20,000 | -40 to 350 | 7387 | Glass, Metal, Plastic, Rubber | 7614A36 | 00000 | ||
| 332 | 33 | Bottle | 3 min. | 24 | 3,000 | 20 lbf/in. wd. | Paste | 100,000 | -65 to 400 | 7387 | Glass, Metal, Plastic, Rubber | 1700A29 | 000000 | ||
| 334 | 0.8 | Syringe | 90 sec. | 24 | 2,800 | 25 lbf/in. wd. | Thick Liquid | 80,000 | -65 to 350 | 7380, 7387 | Glass, Metal, Plastic, Rubber | 1700A211 | 00000 | ||
| 392 | 1.69 | Tube | 60 sec. | 24 | 2,500 | Not Rated | Thick Liquid | 6,500 | -65 to 250 | 7380, 7387 | Glass, Metal, Plastic, Rubber | 1700A102 | 00000 | ||
| 392 | 33 | Bottle | 60 sec. | 24 | 2,500 | Not Rated | Thick Liquid | 6,500 | -65 to 250 | 7380, 7387 | Glass, Metal, Plastic, Rubber | 1700A1 | 000000 | ||
Adhesive Primers for Instant-Bond Adhesives
 |  |
Can | Applicator-Top Bottle, Spray Bottle |
Improve instant-bond adhesive performance on hard-to-bond slippery plastics.
Applicator-Top Bottle—Adhesive primers in applicator-top bottles also include a spray head for easy dispensing.
Cannot Be Sold To—These adhesive primers cannot be sold to the areas listed because they exceed local regulatory limits on VOCs (volatile organic compounds).
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Drying Time, sec. | Consistency | Viscosity, cP | Color | Cannot Be Sold To | Each | |||
Loctite® Adhesive Primers | |||||||||||
| 7701 | 1.75 | Applicator-Top Bottle, Spray Bottle | 30 | Thin Liquid | 1 | Clear | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 7614A34 | 000000 | ||
| 770 | 1.75 | Applicator-Top Bottle, Spray Bottle | 30 | Thin Liquid | 1 | White | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 66205A24 | 00000 | ||
| 770 | 16 | Can | 30 | Thin Liquid | 1 | White | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 66205A36 | 00000 | ||
Slow-Set Epoxy Structural Adhesives
|
Syringe |
Take your time positioning parts—these epoxies remain adjustable for at least 90 minutes before setting. Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.
These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
Paste—Thicker than liquid adhesives but still spreadable—good for filling gaps and covering surfaces.
Container | Strength | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, hr. | Reaches Full Strength, hr. | Shear, psi | Peel | Mix Ratio | Consistency | Viscosity, cP | For Joining | Each | |||
J-B Weld | ||||||||||||||
Original | ||||||||||||||
| 50165 | 0.85 | Syringe | 4 | 24 | 1,800 | Not Rated | 1:1 | Paste | 150,000 | Composite, Glass, Masonry, Metal, Plastic, Rubber | 7605A4 | 00000 | ||
Adhesive Primers for Acrylic Plastic Adhesives, Retaining Compounds, and Threadlockers
 |  |  | |  |
Aerosol Can | Bottle | Can | Applicator-Top Bottle, Spray Bottle | Stick |
Container | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Net Wt., oz. | Type | Drying Time | Consistency | Viscosity | Color | Environment | Each | |||
Loctite® Adhesive Primers | ||||||||||||
| 7088 | — | 0.59 | Stick | Instant | Paste | Not Rated | Turquoise | — | 66205A27 | 000000 | ||
| 7090 | 1 fl. oz. | — | Bottle | Instant | Thin Liquid | 20 cP | Blue | — | 7614A39 | 00000 | ||
| 7471 | — | 4.5 | Aerosol Can | 30 sec. | Thin Liquid | 2 cP | Amber | — | 66205A21 | 00000 | ||
| 7471 | 1.75 fl. oz. | — | Applicator-Top Bottle, Spray Bottle | 30 sec. | Thin Liquid | 2 cP | Amber | — | 66205A39 | 00000 | ||
| 7471 | 1 gal. | — | Can | 30 sec. | Thin Liquid | 2 cP | Amber | — | 66205A41 | 000000 | ||
| 7649 | — | 0.88 | Aerosol Can | 30 sec. | Thin Liquid | 2 cP | Green | Food and Beverage | 7614A27 | 00000 | ||
| 7649 | — | 4.5 | Aerosol Can | 30 sec. | Thin Liquid | 2 cP | Green | Food and Beverage | 7614A17 | 00000 | ||
| 7649 | 1.75 fl. oz. | — | Applicator-Top Bottle, Spray Bottle | 30 sec. | Thin Liquid | 2 cP | Green | Food and Beverage | 7614A16 | 00000 | ||
| 7649 | 1 gal. | — | Can | 30 sec. | Thin Liquid | 2 cP | Green | Food and Beverage | 7614A24 | 000000 | ||
Waterproof Epoxy Structural Adhesives
|
Syringe |
Even when used underwater, these adhesives maintain their strength. Epoxies are the strongest and most chemical-resistant adhesives. They bond especially well on metal.
These epoxies come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
Paste—Thicker than liquid adhesives but still spreadable—good for filling gaps and covering surfaces.
Container | Strength | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Shear, psi | Peel | Mix Ratio | Consistency | Viscosity, cP | Temp. Range, ° F | For Joining | Each | |||
J-B Weld | |||||||||||||||
MarineWeld | |||||||||||||||
| 50172 | 0.85 | Syringe | 5 | 1 | 1,800 | Not Rated | 1:1 | Paste | 100,000 | -20 to 300 | Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood | 7605A7 | 000000 | ||
Glue-on-a-Roll
 |
Apply this glue-like tape for a no-mess alternative to liquid adhesives, hot melts, and staples. Also known as adhesive transfer tape, these rolls have a thin film of pressure-sensitive glue on a peel-away liner. They are thinner and more conformable than tape with adhesive on both sides.
Model Number 468MP—467MP and 468MP resist solvents and UV rays.
