We will reply to your message within an hour.
More
Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals.
Assortments include eight different epoxies in 0.1-oz. packets to handle a variety of small jobs.
For quick repairs, these epoxies begin to harden in 6 minutes or less.
To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.
With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions.
Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these epoxies.
Bond most materials without the strong odor of other epoxy adhesives.
Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds.
Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.
With high shear strength and peel strength, these form the strongest bonds of our urethane adhesives.
Also known as super glue, these adhesives bond quickly.
Fasten hard-to-bond plastics, such as polypropylene and polyethylene.
Mixed with rubber for better impact resistance than standard instant-bond adhesives, these adhesives form strong, resilient bonds.
Accommodate joint movement with these adhesives that remain pliable when cured.
Form bonds in 5 seconds or less.
To invisibly bond transparent plastics, these adhesives won’t turn cloudy.
These adhesives withstand temperatures of 390° F or more.
In especially damp or humid environments, these adhesives keep their hold.
Make strong, instant bonds on a variety of materials—but not your skin.
Form bonds without the strong odor of other instant-bond adhesives.
Use these adhesives in applications that are highly sensitive to contaminants.
Use these thick gels, also known as super glue, on vertical surfaces or to fill gaps between parts.
Bond plastics, porous materials, or dirty surfaces.
These thick gels fill gaps up to 0.2" wide—the largest of any of our instant-bond adhesives.
These super glues are blended with rubber for better impact and moisture resistance than other instant-bond adhesives.
For faster bonding, these adhesives begin to harden in half the time of our other wicking instant-bond adhesives.
These thin liquids, also known as super glue, flow into small gaps.
These adhesives withstand temperatures up to 480° F.
For flexible bonds that resist cracking, these adhesives stay pliable.
Form bonds with twice the strength of our other spray adhesives.
Apply these adhesives on two surfaces, air dry, and then bring together to bond.
Bond glass and stone to drywall, treated lumber, and subfloors.
Install vinyl and rubber treads on stairs with this adhesive.
Bond carpeting, vinyl tile, and other floor coverings to subfloors.
Bond and repair nosing and stair treads with this thick, two-part epoxy.
Adhere vinyl and rubber wall bases to wood, drywall, and concrete.
Improve instant-bond adhesive performance on hard-to-bond materials.
Use these primers with structural epoxies, acrylics, and urethanes to promote bonding to EPDM rubber, polyolefin, and thermoplastic elastomers.
Made from silicone, these sealants are RTV (room-temperature vulcanizing).
These sealants include a material certificate with traceable lot number, test report, and product shelf life.
Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.
Compliant with ASTM E-595, these sealants produce almost no volatile materials in a vacuum.
A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.
Apply these sealants in cold temperatures, on wet surfaces, and even through running water.
Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics.
Meeting requirements for semiconductor, biomedical, and electronics clean rooms, these sealants won’t contaminate air and surfaces.
These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.
These sealants are marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.
These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.
Impervious to the swelling effects of oil, fuel, and solvents, use these high-strength sealants to assemble and repair fuel systems and tanks.
Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.
These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Fix roof leaks in cold and wet conditions. These sealants can even be applied underwater.
Prevent the edges of tape, signs, and graphics from peeling by sealing out water and debris.
Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.
An easy way to make repairs in the field. Cut patches to size, peel off the backing, and press into place. Expose them to sunlight or a UV lamp and they begin to harden immediately.
Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.
Also known as sloshing compounds, these surface fillers bond to rough, rusty surfaces in fuel tanks to repair leaks and prevent further corrosion.
Use these two-part fillers to rebuild cracked or worn plastic surfaces.
These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure.
These adhesives come in a can.
Form bonds that will not degrade in the presence of oils and fuels.
Use cartridges with a standard caulk gun for quick and easy dispensing.
The thick consistency of these gasket makers creates a seal right away even before they harden. Press the nozzle to dispense a uniform bead.
Create a seal to get your machine back up and running in just two hours. These gasket makers have a thick consistency that creates a seal right away, even before they harden.
Dispense a uniform bead when you press the nozzle.
These gasket makers combine the ability to withstand temperatures up to 600° F with the flexibility to accommodate movement.
These gasket makers combine oil resistance and the flexibility to accommodate movement.
Create gaskets that can flex to accommodate movement and won’t degrade from oil.
Form dense, rigid gaskets that won’t degrade in the presence of oil.
With a standard caulk gun, quickly and easily make dense, rigid gaskets that won’t degrade from oil.
Remove oil- or solvent-based residue from metal, plastic, wood, carpet, upholstery, and painted surfaces.
Remove silicone, foam sealants, caulk, wet or dry latex-based foams, and construction adhesives.
Less aggressive than standard epoxy removers, these solvent-based wipes remove uncured epoxy adhesives and solder paste.
Remove oil-based residue from hard surfaces, painted surfaces, vinyl, carpet, and fabric.
For strong bonds, clean and degrease surfaces before applying adhesives.
Use these cleaners on PVC, CPVC, and ABS pipe to remove dirt and degrease surfaces.
Spray these primers onto a mounting surface to quickly and smoothly apply signs, labels, and protective films.