Filter by
Aerosol Surface Fillers for Plastic
Spray these surface fillers on molded plastic parts that have surface blemishes, scratches, and mold lines. Use with ABS, polystyrene, and glass-filled nylon. Surface fillers are clear when dry. They cannot be sold to Canada due to local chemical regulations.
Match the appearance of the surface filler to your part. Satin reflects the most light and seems to shine. Matte reflects almost no light and appears dull. Eggshell reflects some light but is duller than satin.
Appearance | Container Net Weight, oz. | Spray Position | Begins to Harden, min. | Reaches Full Strength, min. | Consistency | Approximate Coverage @ Thick. | Max. Thick., mil | For Use Outdoors | Temp. Range, °F | Color | For Use On | Cannot Be Sold To | Each | |
Satin | 16 | Upright | 5 | 60 | Thin Liquid | 15 sq. ft. @ 1 mil | 1 | No | 45° to 100° | Clear | Polystyrene Plastic, ABS Plastic, Glass-Filled Nylon | Canada | 0000000 | 000000 |
Matte | 16 | Upright | 5 | 60 | Thin Liquid | 15 sq. ft. @ 1 mil | 1 | No | 45° to 100° | Clear | Polystyrene Plastic, ABS Plastic, Glass-Filled Nylon | Canada | 0000000 | 00000 |
Eggshell | 16 | Upright | 5 | 60 | Thin Liquid | 15 sq. ft. @ 1 mil | 1 | No | 45° to 100° | Clear | Polystyrene Plastic, ABS Plastic, Glass-Filled Nylon | Canada | 0000000 | 00000 |