Adjustable Locating Buttons

Filter by

System of Measurement

Thread Size

Length

Material

Head Length

Thread Length

Head Width

Load Capacity

Tip Diameter

Tip-to-Head Length

Performance

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

REACH

RoHS

Range of Motion

Height

Thread Pitch

Overall Length

Shoulder Diameter

Overall Height

25 Products

Swiveling Locating and Support Buttons

The swiveling tip supports uneven and angled surfaces on workpieces and fixtures. These buttons screw into a threaded hole. Also known as rest buttons.

		Head				Thread
	Tip Dia.	Lg.	Wd.	Tip-to-Head Lg.	Lg.	Size	Lg.	Range of Motion	Head Lg. Tolerance	Load Cap., lb.	Tip Material		Each
Steel



		1/4"	1/4"	3/8"	1/16"	5/16"	10-32	1/2"	28°	-0.002" to 0.002"	1,150	Stainless Steel	1417N11	000000


		5/16"	5/16"	7/16"	1/8"	7/16"	1/4"-20	1/2"	28°	-0.002" to 0.002"	2,400	Stainless Steel	1417N12	00000
		7/16"	3/8"	1/2"	1/8"	1/2"	5/16"-18	1/2"	28°	-0.002" to 0.002"	2,750	Stainless Steel	1417N13	00000
		9/16"	1/2"	5/8"	1/8"	5/8"	3/8"-16	1/2"	28°	-0.002" to 0.002"	3,400	Stainless Steel	1417N14	00000
		3/4"	5/8"	13/16"	1/8"	3/4"	1/2"-13	1"	32°	-0.002" to 0.002"	5,900	Stainless Steel	1417N15	00000
		13/16"	11/16"	15/16"	1/8"	13/16"	5/8"-11	1"	32°	-0.002" to 0.002"	9,900	Stainless Steel	1417N16	00000
		8 mm	8 mm	10 mm	2 mm	10 mm	M6 × 1 mm	12 mm	28°	-0.05 mm to 0.05 mm	2,050	Stainless Steel	1417N17	00000
		11 mm	11 mm	13 mm	3 mm	14 mm	M8 × 1.25 mm	12 mm	28°	-0.05 mm to 0.05 mm	3,450	Stainless Steel	1417N18	00000

Adjustable Support Screws

When working with large or flexible workpieces that could bow under machining pressure, use these screws as easy-to-install support points. Also known as jack screws or jig screws, they thread into a T-slot nut or threaded hole in the fixture to support or locate the workpiece above your machine table.

			Shoulder		Head
	Thread Lg.	Overall Lg.	Dia.	Ht.	Dia.	Ht.		Each
Steel







				3/8"-16 Threads

				1 1/4"	1 7/8"	1 1/8"	3/8"	3/8"	1/4"	8513A35	000000


				1 5/8"	2 1/4"	1 1/8"	3/8"	3/8"	1/4"	8513A36	00000
				2"	2 5/8"	1 1/8"	3/8"	3/8"	1/4"	8513A37	00000




						1/2"-13 Threads

						1 1/4"	1 7/8"	1 1/8"	3/8"	3/8"	1/4"	8513A38	00000


						1 5/8"	2 1/4"	1 1/8"	3/8"	3/8"	1/4"	8513A39	00000
						2"	2 5/8"	1 1/8"	3/8"	3/8"	1/4"	8513A41	00000
						2 1/2"	3 1/8"	1 1/8"	3/8"	3/8"	1/4"	8513A42	00000




								5/8"-11 Threads

								1 5/8"	2 1/4"	1 3/8"	3/8"	3/8"	1/4"	8513A43	00000


								2 1/2"	3 1/8"	1 3/8"	3/8"	3/8"	1/4"	8513A45	00000

Adjustable Side Stops

Adjust the horizontal screw to hold workpieces of varying sizes in precise positions. These stops thread into a hole in your fixture or machinery or into a T-slot nut for use on a machine table.

Swivel Pads—Swivel pads move in all directions to make maximum contact with angled and uneven workpieces.

	Work Supports						Swivel Pads
		Thread
	Overall Ht.	Size	Lg. (A)	Lg. (B)		Each		Each
Steel



		1 3/4"	1/4"-20	1 3/16"	1 3/16"	3208N11	000000	8955A11	00000


		2 3/4"	3/8"-16	1 31/32"	1 15/16"	3208N12	00000	8955A13	0000
		3 5/16"	1/2"-13	2 3/8"	2 3/8"	3208N13	00000	8955A14	0000
		4 13/32"	5/8"-11	3 5/32"	3 5/32"	3208N14	00000	8955A15	0000