McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    84 Products

    Selectable-Length Clevis Pins
    3D CAD models available

    Change the usable length by inserting a cotter pin into one of the holes, which are spaced 1/4" apart. These pins are often used as replacement parts when you don't have the pin you need on hand. They have a flat, low-profile head that fits in tighter spaces than bent-head pins, but they're not as easy to grip. Cotter pins are not included.
    The excess length can be cut off after installation.
    Steel
    Image of Product. Front orientation. Contains Annotated. Clevis Pins. Selectable-Length Clevis Pins.
    Zinc-Plated Carbon Steel—These pins withstand occasional exposure to moisture. However, since friction from moving parts can wear away the finish, they're not ideal for wet environments. While not nearly as corrosion resistant as stainless steel, they are stronger and won’t deform under stress.
    Head
    Usable Lg.
    Dia. Tolerance
    For Max.
    Cotter Pin Dia.
    No. of
    Holes
    Min.
    Hardness
    Lg.
    Dia.
    Ht.
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Carbon Steel
     
    3/16" Diameter
    1/4", 1/2", 3/4", 1", 1 1/4"-0.008" to 0.004"3/32"5Rockwell B721 1/2"5/16"1/16"1000000000000000
    3/4", 1", 1 1/4", 1 1/2", 1 3/4"-0.008" to 0.004"3/32"5Rockwell B722"5/16"1/16"100000000000000
    1 1/4", 1 1/2", 1 3/4", 2", 2 1/4"-0.008" to 0.004"3/32"5Rockwell B722 1/2"5/16"1/16"100000000000000
     
    1/4" Diameter
    1/4", 1/2", 3/4"-0.007" to 0.004"7/64"3Rockwell B721"3/8"3/32"100000000000000
    1/4", 1/2", 3/4", 1", 1 1/4"-0.007" to 0.004"7/64"5Rockwell B721 1/2"3/8"3/32"100000000000000
    1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4"-0.007" to 0.004"7/64"6Rockwell B722"3/8"3/32"100000000000000
    3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4"-0.007" to 0.004"7/64"7Rockwell B722 1/2"3/8"3/32"100000000000000
    1 1/4", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4"-0.007" to 0.004"7/64"7Rockwell B723"3/8"3/32"100000000000000
     
    5/16" Diameter
    1/4", 1/2", 3/4"-0.009" to 0.004"7/64"3Rockwell B721"7/16"3/32"100000000000000
    1/4", 1/2", 3/4", 1", 1 1/4"-0.009" to 0.004"7/64"5Rockwell B721 1/2"7/16"3/32"100000000000000
    1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4"-0.009" to 0.004"7/64"6Rockwell B722"7/16"3/32"100000000000000
    3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4"-0.009" to 0.004"7/64"7Rockwell B722 1/2"7/16"3/32"100000000000000
    1 1/4", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4"-0.009" to 0.004"7/64"7Rockwell B723"7/16"3/32"1000000000000000
    1 3/4", 2", 2 1/4", 2 1/2", 2 3/4", 3", 3 1/4"-0.009" to 0.004"7/64"7Rockwell B723 1/2"7/16"3/32"1000000000000000
    2 1/4", 2 1/2", 2 3/4", 3", 3 1/4", 3 1/2", 3 3/4"-0.009" to 0.004"7/64"7Rockwell B724"7/16"3/32"1000000000000000
     
    3/8" Diameter
    1/4", 1/2", 3/4"-0.011" to 0.004"9/64"3Rockwell B721"1/2"1/8"100000000000000
    1/4", 1/2", 3/4", 1", 1 1/4"-0.011" to 0.004"9/64"5Rockwell B721 1/2"1/2"1/8"100000000000000
    1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4"-0.011" to 0.004"9/64"6Rockwell B722"1/2"1/8"100000000000000
    3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4"-0.011" to 0.004"9/64"7Rockwell B722 1/2"1/2"1/8"1000000000000000
    1 1/4", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4"-0.011" to 0.004"9/64"7Rockwell B723"1/2"1/8"1000000000000000
    1 3/4", 2", 2 1/4", 2 1/2", 2 3/4", 3", 3 1/4"-0.011" to 0.004"9/64"7Rockwell B723 1/2"1/2"1/8"1000000000000000
    2 1/4", 2 1/2", 2 3/4", 3", 3 1/4", 3 1/2", 3 3/4"-0.011" to 0.004"9/64"7Rockwell B724"1/2"1/8"1000000000000000
     
    7/16" Diameter
    1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4"-0.007" to -0.002"5/32"6Rockwell B722"9/16"5/32"1000000000000000
    3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4"-0.007" to -0.002"5/32"7Rockwell B722 1/2"9/16"5/32"1000000000000000
    1 1/4", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4"-0.007" to -0.002"5/32"7Rockwell B723"9/16"5/32"1000000000000000
     
    1/2" Diameter
    1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4"-0.009" to -0.004"5/32"6Rockwell B722"5/8"5/32"1000000000000000
    3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4"-0.009" to -0.004"5/32"7Rockwell B722 1/2"5/8"5/32"1000000000000000
    1 1/4", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4"-0.009" to -0.004"5/32"7Rockwell B723"5/8"5/32"1000000000000000
    1 3/4", 2", 2 1/4", 2 1/2", 2 3/4", 3", 3 1/4"-0.009" to -0.004"5/32"7Rockwell B723 1/2"5/8"5/32"500000000000000
    2 1/4", 2 1/2", 2 3/4", 3", 3 1/4", 3 1/2", 3 3/4"-0.009" to -0.004"5/32"7Rockwell B724"5/8"5/32"500000000000000
     
    5/8" Diameter
    1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4"-0.009" to 0.004"5/32"6Rockwell B722"13/16"1/4"500000000000000
    1 1/4", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4"-0.009" to 0.004"5/32"7Rockwell B723"13/16"1/4"500000000000000
    2 1/4", 2 1/2", 2 3/4", 3", 3 1/4", 3 1/2", 3 3/4"-0.009" to 0.004"5/32"7Rockwell B724"13/16"1/4"500000000000000
     
    3/4" Diameter
    1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4"-0.009" to 0.002"5/32"6Rockwell B722"15/16"5/16"500000000000000
    1 1/4", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4"-0.009" to 0.002"5/32"7Rockwell B723"15/16"5/16"10000000000000
     
    Corrosion-Resistant Stainless Steel
    Image of Product. Front orientation. Contains Annotated. Clevis Pins. Selectable-Length Clevis Pins.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these pins resist rusting. They're strong enough to fasten most components but won't withstand stress and vibration as well as steel.
    Head
    Usable Lg.
    Dia. Tolerance
    For Max.
    Cotter Pin Dia.
    No. of
    Holes
    Min.
    Hardness
    Lg.
    Dia.
    Ht.
    Passivation
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
     
    3/16" Diameter
    1/4", 1/2", 3/4", 1", 1 1/4"-0.008" to 0.004"3/32"5Not Rated1 1/2"5/16"1/16"Unpassivated1000000000000000
    3/4", 1", 1 1/4", 1 1/2", 1 3/4"-0.008" to 0.004"3/32"5Not Rated2"5/16"1/16"Unpassivated100000000000000
    1 1/4", 1 1/2", 1 3/4", 2", 2 1/4"-0.008" to 0.004"3/32"5Not Rated2 1/2"5/16"1/16"Unpassivated100000000000000
     
    1/4" Diameter
    1/4", 1/2", 3/4"-0.007" to 0.004"3/32"3Not Rated1"3/8"3/32"Unpassivated100000000000000
    1/4", 1/2", 3/4", 1", 1 1/4"-0.007" to 0.004"3/32"5Not Rated1 1/2"3/8"3/32"Unpassivated100000000000000
    1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4"-0.007" to 0.004"3/32"6Not Rated2"3/8"3/32"Unpassivated100000000000000
    3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4"-0.007" to 0.004"3/32"7Not Rated2 1/2"3/8"3/32"Unpassivated100000000000000
    1 1/4", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4"-0.007" to 0.004"3/32"7Not Rated3"3/8"3/32"Unpassivated100000000000000
     
    5/16" Diameter
    1/4", 1/2", 3/4"-0.009" to 0.004"7/64"3Not Rated1"7/16"3/32"Unpassivated100000000000000
    1/4", 1/2", 3/4", 1", 1 1/4"-0.009" to 0.004"7/64"5Not Rated1 1/2"7/16"3/32"Unpassivated100000000000000
    1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4"-0.009" to 0.004"7/64"6Not Rated2"7/16"3/32"Unpassivated100000000000000
    3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4"-0.009" to 0.004"7/64"7Not Rated2 1/2"7/16"3/32"Unpassivated100000000000000
    1 1/4", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4"-0.009" to 0.004"7/64"7Not Rated3"7/16"3/32"Unpassivated100000000000000
    1 3/4", 2", 2 1/4", 2 1/2", 2 3/4", 3", 3 1/4"-0.009" to 0.004"7/64"7Not Rated3 1/2"7/16"3/32"Unpassivated100000000000000
    2 1/4", 2 1/2", 2 3/4", 3", 3 1/4", 3 1/2", 3 3/4"-0.009" to 0.004"7/64"7Not Rated4"7/16"3/32"Unpassivated100000000000000
     
    3/8" Diameter
    1/4", 1/2", 3/4"-0.011" to 0.004"9/64"3Not Rated1"1/2"1/8"Unpassivated100000000000000
    1/4", 1/2", 3/4", 1", 1 1/4"-0.011" to 0.004"9/64"5Not Rated1 1/2"1/2"1/8"Unpassivated100000000000000
    1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4"-0.011" to 0.004"9/64"6Not Rated2"1/2"1/8"Unpassivated100000000000000
    3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4"-0.011" to 0.004"9/64"7Not Rated2 1/2"1/2"1/8"Unpassivated100000000000000
    1 1/4", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4"-0.011" to 0.004"9/64"7Not Rated3"1/2"1/8"Unpassivated100000000000000
    1 3/4", 2", 2 1/4", 2 1/2", 2 3/4", 3", 3 1/4"-0.011" to 0.004"9/64"7Not Rated3 1/2"1/2"1/8"Unpassivated100000000000000
    2 1/4", 2 1/2", 2 3/4", 3", 3 1/4", 3 1/2", 3 3/4"-0.011" to 0.004"9/64"7Not Rated4"1/2"1/8"Unpassivated100000000000000
     
    7/16" Diameter
    1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4"-0.007" to -0.002"5/32"6Not Rated2"9/16"5/32"Unpassivated100000000000000
    3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4"-0.007" to -0.002"5/32"7Not Rated2 1/2"9/16"5/32"Unpassivated100000000000000
    1 1/4", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4"-0.007" to -0.002"5/32"7Not Rated3"9/16"5/32"Unpassivated100000000000000
     
    1/2" Diameter
    1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4"-0.009" to 0.004"5/32"6Not Rated2"5/8"5/32"Unpassivated100000000000000
    3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4"-0.009" to 0.004"5/32"7Not Rated2 1/2"5/8"5/32"Unpassivated100000000000000
    1 1/4", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4"-0.009" to 0.004"5/32"7Not Rated3"5/8"5/32"Unpassivated100000000000000
    1 3/4", 2", 2 1/4", 2 1/2", 2 3/4", 3", 3 1/4"-0.009" to 0.004"5/32"7Not Rated3 1/2"5/8"5/32"Unpassivated100000000000000
    2 1/4", 2 1/2", 2 3/4", 3", 3 1/4", 3 1/2", 3 3/4"-0.009" to 0.004"5/32"7Not Rated4"5/8"5/32"Unpassivated100000000000000
     
    5/8" Diameter
    1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4"-0.009" to 0.004"5/32"6Not Rated2"13/16"1/4"Unpassivated100000000000000
    1 1/4", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4"-0.009" to 0.004"5/32"7Not Rated3"13/16"1/4"Unpassivated100000000000000
    2 1/4", 2 1/2", 2 3/4", 3", 3 1/4", 3 1/2", 3 3/4"-0.009" to 0.004"5/32"7Not Rated4"13/16"1/4"Unpassivated100000000000000
     
    3/4" Diameter
    1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4"-0.009" to 0.002"5/32"6Not Rated2"15/16"5/16"Unpassivated100000000000000
    1 1/4", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4"-0.009" to 0.002"5/32"7Not Rated3"15/16"5/16"Unpassivated100000000000000
     

    Selectable-Length Bent-Head Clevis Pins
    3D CAD models available

    Change the usable length in 1/4" increments by inserting a cotter pin into one of the holes. These pins are often used as replacement parts when you don't have the exact pin you need on hand. The bent head gives you a better grip than flat-head pins and acts as a stop so the pin can’t be pulled out from the other end.
    The excess length can be cut off after installation.
    Steel
    Image of Product. Front orientation. Contains Annotated. Clevis Pins. Selectable-Length Bent-Head Clevis Pins.
    Zinc-Plated Carbon Steel—These pins withstand occasional exposure to moisture. However, since friction from moving parts can wear away the finish, they're not ideal for wet environments. While not nearly as corrosion resistant as stainless steel, they are stronger and won’t deform under stress.
    Usable Lg.
    Dia.
    Tolerance
    For Max.
    Cotter Pin Dia.
    No. of
    Holes
    Min.
    Hardness
    Lg.
    Each
    Zinc-Plated Carbon Steel with Cotter Pin
     
    3/8" Diameter
    2 1/2", 2 3/4", 3", 3 1/4", 3 1/2", 3 3/4", 4"-0.005" to 0"5/32"7Not Rated4"00000000000000
    4 1/2", 4 3/4", 5", 5 1/4", 5 1/2", 5 3/4", 6"-0.005" to 0"5/32"7Not Rated6"0000000000000
     
    1/2" Diameter
    2 1/2", 2 3/4", 3", 3 1/4", 3 1/2", 3 3/4", 4"-0.005" to 0"5/32"7Not Rated4"0000000000000
    4 1/2", 4 3/4", 5", 5 1/4", 5 1/2", 5 3/4", 6"-0.005" to 0"5/32"7Not Rated6"0000000000000
     
    5/8" Diameter
    2 1/8", 2 7/16", 2 3/4", 3 1/16", 3 3/8", 3 11/16", 4"-0.005" to 0"13/64"7Not Rated4"0000000000000
    4 1/8", 4 7/16", 4 3/4", 5 1/16", 5 3/8", 5 11/16", 6"-0.005" to 0"13/64"7Not Rated6"0000000000000
     
    3/4" Diameter
    2 1/8", 2 7/16", 2 3/4", 3 1/16", 3 3/8", 3 11/16", 4"-0.005" to 0"13/64"7Not Rated4"0000000000000
    4 1/8", 4 7/16", 4 3/4", 5 1/16", 5 3/8", 5 11/16", 6"-0.005" to 0"13/64"7Not Rated6"00000000000000
     
    1" Diameter
    4 1/8", 4 7/16", 4 3/4", 5 1/16", 5 3/8", 5 11/16", 6"-0.005" to 0"13/64"7Not Rated6"00000000000000
    6 1/8", 6 7/16", 6 3/4", 7 1/16", 7 3/8", 7 11/16", 8"-0.005" to 0"13/64"7Not Rated8"00000000000000
     
    1 7/32" Diameter
    6 1/8", 6 7/16", 6 3/4", 7 1/16", 7 3/8", 7 11/16", 8"-0.005" to 0"13/64"7Not Rated8"00000000000000
     
    Corrosion-Resistant Stainless Steel
    Image of Product. Front orientation. Contains Annotated. Clevis Pins. Selectable-Length Bent-Head Clevis Pins.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these pins resist rusting. They're strong enough to fasten most components but won't withstand stress and vibration as well as steel.
    Usable Lg.
    Dia.
    Tolerance
    For Max.
    Cotter Pin Dia.
    No. of
    Holes
    Min.
    Hardness
    Lg.
    Passivation
    Each
    18-8 Stainless Steel with Cotter Pin
     
    1/2" Diameter
    4 1/2", 4 3/4", 5", 5 1/4", 5 1/2", 5 3/4", 6"-0.005" to 0"5/32"7Not Rated6"Unpassivated000000000000000
     
    5/8" Diameter
    4 1/8", 4 7/16", 4 3/4", 5 1/16", 5 3/8", 5 11/16", 6"-0.005" to 0"13/64"7Not Rated6"Unpassivated00000000000000
     
    3/4" Diameter
    4 1/8", 4 7/16", 4 3/4", 5 1/16", 5 3/8", 5 11/16", 6"-0.005" to 0"13/64"7Not Rated6"Unpassivated00000000000000
     
    back to top