These slotted thumb screws have a thin, knurled head for use in low-clearance applications. Made of 18-8 stainless steel, they are chemical resistant.

These metric thumb screws have a thin, knurled head for use in low-clearance applications. They have a black-oxide finish to resist corrosion in dry environments.

Brass thumb screws are corrosion resistant in wet environments and electrically conductive.

These metric thumb screws are made of chemical-resistant 18-8 stainless steel. They have a raised head that makes them easy to grip.

A raised head makes these thumb screws easy to grip. They have a black-oxide finish to resist corrosion in dry environments.

Stainless steel thumb screws have excellent corrosion resistance in most environments.

Brass thumb screws are corrosion resistant in wet environments and electrically conductive.

These slotted thumb screws are slim to fit in tight spaces.

Stainless steel thumb screws have excellent corrosion resistance in most environments.

A large swivel angle allows these thumb screws to make better contact with angled and uneven surfaces than nonremovable swivel-tip thumb screws.

Made from 18-8 stainless steel, these thumb screws are chemical resistant. Also known as dog- and pilot-point thumb screws, insert the point into a drilled hole or slot to hold items in place.

These steel thumb screws have a black-oxide finish to resist corrosion in dry environments.

These metric thumb screws have arms that provide a flat surface to push your fingers against.

These metric thumb screws have a large head that allows you to grip them with your entire hand for greater torque while tightening than standard knurled plastic-head thumb screws.

Tighten these thumb screws by hand or with a hex key for more torque.

A knurled head allows for slip-resistant controlled adjustment.

Wings provide more leverage than spade-head thumb screws for greater torque while tightening. A zinc plating provides corrosion resistance in wet environments.

Stronger than standard nylon, these thumb screws are chemical resistant, nonconductive, and lightweight. They have a raised head that makes them easy to grip.

These nylon thumb screws are chemical resistant, nonconductive, and lightweight.

Stainless steel thumb screws have excellent corrosion resistance in most environments.

Fasten material by hand, so tools don’t scratch or contaminate parts you frequently adjust in food-processing or pharmaceutical plants.

These steel thumb screws have a black-oxide finish to resist corrosion in dry environments.

A rolling ball swivels 360° to minimize surface damage and allow for slight adjustments without loosening the screw.

Stainless steel set screws have excellent corrosion resistance in most environments.

Made from 18-8 stainless steel, these set screws are chemical resistant. The tip makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage.

Made from 316 stainless steel, these set screws have excellent chemical resistance and can be used in saltwater environments. The tip makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage.

The tip makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage.

Made from nylon, these set screws are lightweight, resist chemicals, and won’t carry an electric current.

Secure gears, pulleys, and other objects that require frequent adjustments, even in wet environments.

Secure objects to flat surfaces in washdown and corrosive environments.

These chemical-resistant 18-8 stainless steel screws have an extra-soft nylon tip, which minimizes the damage that can occur from metal-on-metal contact. Use them on soft surfaces such as aluminum.

Available in metric sizes, these alloy steel set screws have an extra-soft nylon tip that minimizes the damage that can occur from metal-on-metal contact. Use them on soft surfaces such as aluminum.

These set screws have a tip that is harder than nylon and silver to provide a secure hold on hard surfaces. The body is 18-8 stainless steel for good chemical resistance.

With a tip that's harder than nylon and silver, these alloy steel set screws provide a secure hold on hard surfaces. The body has a black-oxide finish to resist corrosion in dry environments.

These set screws have good chemical resistance.

These 18-8 stainless steel set screws have good chemical resistance. Also known as half dog-point set screws, they have a protruding tip that locks within a mating hole or slot to keep parts aligned.

These metric set screws have a protruding tip that locks within a mating hole or slot to keep parts aligned. They're also known as dog-point set screws.

Turn these metric screws by hand using the hex head, or tighten them with a wrench for extra torque. With an extended tip that locks into a mating hole or slot—sometimes known as a dog point—they are often used to align and secure parts such as gears and pulley wheels.

Use the square head to turn these screws by hand, or use a wrench when you need more torque. Also known as half dog-point set screws, they have a protruding tip that locks within a mating hole or slot to keep parts aligned.

Also known as full dog-point set screws, the tip is twice as long as the tip on other extended-tip set screws for greater engagement in deep mating holes.

Made from alloy steel, these metric set screws have a thin edge that digs into hard surfaces for a secure hold. They have a nylon locking patch that grips threads to resist loosening.

These 18-8 stainless steel set screws are chemical resistant. They have a nylon locking patch that grips threads to resist loosening.

These metric alloy steel set screws dig into hard surfaces for a secure hold. They have serrations on the cup edge that grip the material surface to resist loosening.

These metric 18-8 stainless steel set screws are chemical resistant. They have serrations on the cup edge that grip the material surface to resist loosening.

Made from alloy steel, these inch size set screws have a thin edge that digs into hard surfaces for a secure hold.

Brass set screws are corrosion resistant in wet environments, nonmagnetic, and electrically conductive.

Choose these set screws for their adherence to strict military standards for material and construction.

Made from 316 stainless steel, these set screws have excellent chemical resistance and can be used in saltwater environments.

These metric set screws have good chemical resistance.

More corrosion resistant than 18-8 stainless steel set screws, these have excellent resistance to chemicals and salt water.

Alloy steel set screws dig into hard surfaces for a secure hold.

These set screws have good chemical resistance.

These inch size set screws are vented to allow fluid and gas to pass through.

A low-profile flat-faced ball tip allows these metric set screw to be used in low-clearance applications.

A wide tip provides more gripping power than standard swivel-tip set screws. To use, remove the tip, thread the screw through the hole, and attach the tip on the other side.

Also known as jam set screws, these lock other screws in place, hold pins, and adjust spring tension. A black-oxide finish provides corrosion resistance in dry environments.

Made from alloy steel, these metric set screws have a pointed tip that wedges into the contact surface for a secure hold on soft materials such as brass.

These metric 18-8 stainless steel set screws are chemical resistant. A pointed tip wedges into the contact surface for a secure hold on soft materials such as brass.

These hangers have internal threads for use with threaded rods, bolts, and anchors.

Drive these hangers into wood with an adjustable wrench, pliers, or a special driver bit.

These hangers are a popular choice for overhead applications.

Multiple thread channels (also known as thread starts) create faster linear travel than lead screws with a single thread start.

Also known as single-start and self-locking lead screws and nuts, these have a single thread that runs the length of the screw. The nut travels only when the screw turns, so your system won't unexpectedly move when the lead screw is at rest.

Also known as single-start and self-locking lead screws and nuts, these have a single thread that runs the length of the screw. The nut travels only when the screw turns, so your system won't unexpectedly move when the lead screw is at rest.

Found in hand-powered clamps, vises, grates, doors, and work tables, lead screws and nuts have broad, square threads that are well suited for quick assembly, high clamping forces, and lifting and lowering heavy objects.

Also known as single-start ball screws and nuts, these have a single thread that runs the length of the screw. They operate with more torque than fast-travel ball screws and nuts.

Keep your ball screw spinning without the ball nut damaging your system. When the ball nut reaches the stop pin at either end of the ball screw, it disengages and begins to idle.

Multiple thread channels (also known as thread starts) create faster linear travel than ball screws with a single thread start.

Install these threaded collars on a metric lead screw to separate and position components, or use them as an end stop to limit travel.

Thread these one-piece collars onto an Acme lead screw.