Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Get two stages of filtration—the first stage removes most particles and water droplets; the second captures any remaining particles and water droplets down to 5 microns.

Protect small air-powered tools, such as impact wrenches, ratchet wrenches, grinders, and screwdrivers.

A polyurethane bowl provides good chemical resistance for use with synthetic compressor oils and cleaning fluids.

Assembled, inspected, and packaged in a clean environment, these filters come sealed in antistatic double bags.

Quickly install these filters on your air line—no pipe nipples or joiner clamps required. Their push-to-connect fittings create tight seals around tubing.

Replace the filter element in your Wilkerson modular compressed air filter to trap solid particles and water droplets as small as 5 microns.

Replace the filter element in your Parker modular compressed air filter to trap solid particles and water droplets.

Replace the filter element in your Aventics modular compressed air filter to trap solid particles and water droplets.

Also known as coalescing filters, these filter elements fit in SMC modular compressed air filters to remove oil and particles as small as 0.01 microns.

Also known as coalescing filters, these filter elements fit in Aventics modular compressed air filters to remove oil and particles as small as 0.01 microns.

Also known as coalescing filters, these filter elements fit in ARO modular compressed air filters to remove oil and particles as small as 0.3 microns.

Also known as coalescing filters, these filter elements fit in Festo modular compressed air filters to remove oil and particles as small as 0.01 microns.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Housing and bowl are 316 stainless steel to handle extremely corrosive environments and meet NACE (National Association of Corrosion Engineers) specifications.

A polyurethane bowl offers good chemical resistance for use with synthetic compressor oils and aggressive cleaning agents.

Use these filters in applications where high-quality air is critical. They remove particles down to 0.003 microns, eliminating small traces of oil vapor and its associated odor.

Use these filters in applications where high-quality air is critical. They remove particles down to 0.003 microns, eliminating small traces of oil vapor and its associated odor.

No need to buy and service two filters—these filters have a single element that removes both oil and particles.

Replace a damaged bowl, or change the bowl material or drain type on your Wilkerson modular compressed air filter.

Replace a damaged bowl, or change the bowl material or drain type on your Norgren modular compressed air filter.

Replace a damaged bowl or change the bowl material or drain type on your ARO modular compressed air filter.

Housing and bowl are 304 stainless steel for good corrosion resistance in damp environments.

Remove bacteria, viruses, moisture, and other particles from compressed air and gases used in food, pharmaceutical, biotech, and electronics applications.

Replace failing or lost O-rings in SMC modular compressed air filters.

Replace failing or lost O-rings and gaskets in Norgren modular compressed air filters.

These separators have higher flow rates compared to our other compressed air separators. Prevent equipment damage and wear caused by moisture in your compressed air supply. The first step in water removal, use one of these separators to remove the large amount of water created as compressed air cools.

When water is condensed out of a compressed air system, it contains oil from the compressor that makes disposal difficult. These separators use two-stage filtration to reduce oil content to below 20 parts per million.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

These filter/regulator combinations come as one convenient unit that cleans the air as it regulates pressure.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A stainless steel housing and bowl allow these filter/regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.

Mount these filter/regulators to a 35 mm DIN rail with the included brackets.

Assembled, inspected, and packaged in a clean environment, these filter/regulators come sealed in antistatic double bags.

A Wilkerson filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Norgren filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Parker filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

An ASCO Numatics filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

No need for thread adapters—these filter/regulator/lubricators have an NPT inlet and a BSPP outlet.

With a clear polycarbonate bowl that’s visible from all angles and silica gel desiccant that changes from blue to pink, it’s easy to see when it’s time to change the cartridge on these dryer/filters and dryer/filter/regulators.

These dryer/filters have a clay desiccant that removes moisture, oil, and particles, so there’s no need to install a separate filter and dryer. Once aftercoolers and separators have removed the bulk of the water, they remove any remaining moisture in your air line.

These all-in-one dryers with filters eliminate the need for individual dryers and filters. They cool air through refrigeration to condense water vapor for removal.

Clean the air going into small blowers and air-powered equipment in tight spaces.

With a threaded connection on both ends, these filters can be installed anywhere in your pipeline to keep dust and debris out of your system.

Typically used on vacuum pumps, these filters ensure that clean air is going in and coming out of your system.

Use one of these compact filters in a tight spot, or combine up to ten for a manifold application.

Remove contaminants, moisture, and other particles from steam that will touch food and for final filtering in pharmaceutical, biotech, and electronics applications.