The lightweight plastic construction makes these blowguns more comfortable to hold than metal.

Designed to reduce noise, these blowguns are quieter than similar standard guns.

Also known as air-shield and safety-shield blowguns, a center airstream blows away debris while an outer air curtain deflects flying chips and dust.

Connect the included hose to your air supply and these blowguns are ready to use.

The extra length lets you access hard-to-reach areas.

These guns include a rubber tip that won't damage your workpiece.

Increase your reach with the telescoping nozzle.

Maximize comfort and minimize strain with these lightweight guns.

The flat nozzle distributes air over a wide area.

Clear dust and debris, test air ducts for leaks, and dry large surfaces without needing a compressed air line.

Blow air backward from the nozzle to clean out the inside of pipes, tubes, and channels without pushing debris into your system.

Clean surfaces without transferring dust or moisture from the air hose. These blowguns have a replaceable filter that traps particles such as rust and smoke and absorbs moisture.

Bend the stand's flexible arm to position your gun and keep it in place. Use the included foot pedal to activate airflow and static elimination.

A nonconductive plastic nozzle and tip protect against accidental contact with live electrical circuits. These blowguns are tested to 1,000 volts to meet IEC 60900.

Prevent buildup of electrostatic discharge (ESD) that can damage electronic components.

Shaped to hold round objects, use these nozzles for installing heat-shrink tubing and bending plastic pipe.

Sets include a focused nozzle for concentrated airflow, a flat-tip nozzle for heating wide surfaces, and a deflecting nozzle that protects adjacent surfaces from heating.

Insert plastic welding rod through a second opening in the nozzle. It directs air to heat the rod and weld plastic.

Set up your heat gun for hands-free operation.

Distribute heat over a wide area for large jobs.

Combine high-volume airflow with low-heat output for warming and drying.

Blast your heating, drying, and shrinking projects with hot air to get the job done quickly. Choose from blowers with temperature settings from 300° to 750° F.

Penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

These rigid nozzles come with a dispensing tip and have threads on one end for connecting to a grease gun.

Penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

These flexible nozzles have threads on both ends for connecting a grease gun to a dispensing tip.

These rigid tip adapters penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

Sets include dispensing tips for grease fittings and bare lubrication points.

These flexible extensions have a quick-disconnect fitting that snaps into your dispensing tip, so you can lubricate grease fittings that are hard to reach.

These tools are suitable for general shop, maintenance, and automotive work.

Use these tools for general shop applications.

Set torque and the wrench will prevent you from exceeding it. These are also known as nutrunners.

Kits include a hammer and round rivet setters.

Rivet setters are required for standard and heavy duty air-powered hammers to drive rivets.

Also known as alligator squeezers, these tools offer up to 6,000 lbs. of force to set solid rivets.

Use these tools for repair and maintenance work.

An extra-long nosepiece allows access to hard-to-reach areas.

Compressed air does the work for you.

These staplers compress the box material as the staple is driven for a tight clinch.

The powerful combination of air and water creates a high-velocity, atomized spray without needing high pressure. These guns also can be used to siphon.

Adjust air-flow for precise control and smooth material flow—these guns have a built-in pressure regulator with a control knob.

Kits include one vortex tube for converting compressed air into a stream of cold air as well as airflow adjusters, a cold-air muffler, a tube fitting, and tubing.

Often used in low-noise environments such as labs and clean rooms, these are quieter than standard enclosure-cooling vortex tubes.

Quietly cool electronics inside enclosures while keeping out rain, snow, splashing water, and dirt.

Keep electronics inside enclosures from overheating by converting compressed air into a stream of cold air.

Quietly cool electronics inside enclosures to your desired temperature while keeping out rain, snow, splashing water, and dirt.

In addition to being quieter than standard enclosure-cooling vortex tubes, these stand up to washdowns and weather. They convert compressed air into a stream of cold air to keep electronics within enclosures from overheating while also keeping dust and other contaminants out.

Use hot compressed air to weld plastics.