We will reply to your message within an hour.
These premium nozzles are engineered for the most efficient airflow consumption.
Made from rubber, these nozzles won’t scratch or damage sensitive workpieces.
Attach to your blowgun to direct airflow.
Also known as air-shield and safety-shield nozzles, a center airstream blows away debris while an outer air curtain deflects flying chips and dust.
Control consumption and noise by adjusting the airflow.
The extra length allows access into hard-to-reach areas.
Extend these telescoping nozzles to increase your reach.
The flat nozzle tip distributes air over a wider area than focused-airflow nozzles.
These nozzles are made of FDA-listed materials.
At less than 2" long and with a wide airflow pattern, these nozzles are ideal for tight spaces where you need to distribute air over a wider area than a focused-airflow nozzle.
Adjust airflow to control consumption and noise.
Air blows out of these nozzles at a right angle in a wide pattern, distributing air over a wider area than focused-airflow nozzles.
Air blows out of these flat nozzles in a wide pattern at a 90° angle from the inlet, distributing air over a wider area than focused-airflow nozzles. They’re FDA compliant 21 CFR 110.40 for use in the food industry.
Blow air backward to clean out the inside of pipes, tubes, and channels without pushing debris into your system.
Nozzles are attached to a flexible hose that bends and holds its shape until you reposition it.
The magnetic base mounts to your work surface and has a control valve for adjusting airflow.
Choose a base, hose, and nozzle for a custom setup.
Shaped to fit into extremely tight spaces, these nozzles can be used to remove parts from molds. Tap the wedge into position, attach the nozzle to a blowgun, and activate the airflow to release the part.
Convert your blowgun to a spray gun. These nozzles spray air and liquids at the same time.
Attach one of these swivels to an air nozzle to direct air 30° left, right, up, and down.
Often used for simultaneously spot cooling and blowing parts, these nozzles cool compressed air without electricity or refrigerants.
Blow debris and sweep it away with the built-in brush.
Turn your blowgun into a scraper to remove and blow away debris at the same time.
These blowguns have a metal body.
The lightweight plastic construction makes these blowguns more comfortable to hold than metal.
The rubber tip won't damage parts.
Designed to reduce noise, these blowguns are quieter than similar standard guns.
Also known as air-shield and safety-shield blowguns, a center airstream blows away debris while an outer air curtain deflects flying chips and dust.
Two inlets allow connection to air lines above or below. Use the top inlet when the blowgun is suspended from an overhead hose and the bottom inlet for bench and floor hoses.
Connect the included hose to your air supply and these blowguns are ready to use.
Operate a blowgun without disconnecting your air tool—these guns fit between the tool and air hose. Good for blowing away debris after using an air-powered sander or grinder.
The extra length lets you access hard-to-reach areas.
The included hose is ready to connect to your air supply.
The lightweight plastic body is more comfortable to hold than metal.
These guns include a rubber tip that won't damage your workpiece.
Also known as air-shield and safety-shield blowguns, an outer air curtain deflects flying chips and dust while the center airstream blows away debris.
Increase your reach with the telescoping nozzle.
Maximize comfort and minimize strain with these lightweight guns.
These blowguns provide more than two times the airflow of standard guns.
Air flows out of the side of the nozzle to clean air filters, radiators, and inside recesses.
The flat nozzle distributes air over a wide area.
The most powerful blowguns we sell, these use compressed air to clean and blow debris.
Blow air backward from the nozzle to clean out the inside of pipes, tubes, and channels without pushing debris into your system.
Also known as siphon guns, these spray air and liquids at the same time. Push the lever and the airflow creates suction that draws water, cleaning solution, or other liquids through the hose.
Clean surfaces without transferring dust or moisture from the air hose. These blowguns have a replaceable filter that traps particles such as rust and smoke and absorbs moisture.
Bend the stand's flexible arm to position your gun and keep it in place. Use the included foot pedal to activate airflow and static elimination.
These guns provide more than three times the airflow of standard static-eliminating blowguns.
Blow off dust and contamination, eliminate static charges, and guard against ESD (electrostatic discharge).
A nonconductive plastic nozzle and tip protect against accidental contact with live electrical circuits. These blowguns are tested to 1,000 volts to meet IEC 60900.
Create a sheet of high-velocity air.
Producing the same airflow as standard air knives, these are quieter and use 18% less compressed air.
Also known as air wipes, these use a 360° airstream to blow off, dry, clean, and cool tubes, cables, extruded shapes, and hoses.
These produce the same airflow as standard static-eliminating air knives but are quieter and use 15% less compressed air.
An ionizing bar temporarily neutralizes static to protect against ESD (electrostatic discharge).
Replace messy mist coolant dispensers—these convert compressed air into a stream of cold air. They can be used in applications where liquid coolant can't.
Mate these gauges to a compressed air line to measure pressure while inflating tires.
Vortex tubes convert compressed air into a stream of cold air.
Kits include one vortex tube for converting compressed air into a stream of cold air as well as airflow adjusters, a cold-air muffler, a tube fitting, and tubing.
Set the thermostat and these vortex tubes switch on only when needed.
Often used in low-noise environments such as labs and clean rooms, these are quieter than standard enclosure-cooling vortex tubes.
Keep electronics inside enclosures from overheating by converting compressed air into a stream of cold air.
Quietly cool electronics inside enclosures to your desired temperature while keeping out rain, snow, splashing water, and dirt.
Cool electronics inside enclosures to your desired temperature while keeping out rain, snow, splashing water, and dirt.
Quietly cool electronics inside enclosures while keeping out rain, snow, splashing water, and dirt.
Cool electronics inside enclosures while keeping out rain, snow, splashing water, and dirt.
UL classified for hazardous locations, these vortex tubes convert compressed air into a stream of cold air to keep electronics within enclosures from overheating while also keeping dust and other contaminants out.
These NEMA-rated vortex tube are designed to keep water out during washdowns.
In addition to being quieter than standard enclosure-cooling vortex tubes, these stand up to washdowns and weather. They convert compressed air into a stream of cold air to keep electronics within enclosures from overheating while also keeping dust and other contaminants out.
Use as either a vacuum or a blower—change the airflow direction to switch functions. Use to clean up dirt, dust, metal chips, and glass.