Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air—joiner clamps connect these regulators into your ARO setup.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air—joiner clamps connect these regulators into your Aventics setup.

An internal check valve permits reverse flow, so these regulators work with double-acting cylinders.

No need to worry about unintentional changes to your pressure setting—these regulators maintain a fixed outlet pressure.

Use these regulators to adjust and maintain the pressure of your tubing air lines.

Mount these regulators to a 35 mm DIN rail with the included brackets. Use them to adjust and maintain the pressure of your compressed air.

Keep an eye on the output pressure in high-flow applications—these regulators have a display so you can monitor your application locally.

View and control output pressure remotely and at the source.

Fit these regulators in tight spaces to adjust and maintain air pressure in sensitive applications where constant, consistent pressure is important.

At ±0.1% accuracy, use these regulators in sensitive applications where constant, consistent pressure is important.

Connect two or more of these manifold regulators to meet multiple pressure requirements from a single air supply—set a different output pressure with each regulator.

Run up to four air-powered tools from a single air supply.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A clear polyurethane bowl makes these filter/regulators chemical resistant for use with synthetic compressor oils and cleaning fluids and allows you to see inside to monitor contents.

A stainless steel housing and bowl allow these filter/regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.

Assembled, inspected, and packaged in a clean environment, these filter/regulators come sealed in antistatic double bags.

A Wilkerson filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

An ARO filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

An ASCO Numatics filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

No need for thread adapters—these filter/regulator/lubricators have an NPT inlet and a BSPP outlet.

Prevent accidental start-up when servicing equipment.

Prevent accidental start-up when servicing equipment.

Prevent accidental start-up when servicing equipment.

Also known as Monday-morning valves, these valves slowly introduce pressure to reduce surge damage during start-up.

Distribute compressed air to multiple locations from a single source.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air. Joiner clamps connect these air filters into your Parker setup.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Mount these filters to a 35 mm DIN rail with the included brackets.

Assembled, inspected, and packaged in a clean environment, these filters come sealed in antistatic double bags.

Use these filters where high water and dirt removal is needed—they have a two-layer filter element made of stainless steel wire mesh and cotton/polyester packing.

The housing and bowl are 316 stainless steel to handle extremely corrosive environments such as those in semiconductor, marine, chemical, and paper industries.

Protect small air-powered tools, such as impact wrenches, ratchet wrenches, grinders, and screwdrivers.

Replace the filter element in your SMC modular compressed air filter to trap solid particles and water droplets as small as 5 microns.

Replace the filter element in your Wilkerson modular compressed air filter to trap solid particles and water droplets as small as 5 microns.

Replace the filter element in your ARO modular compressed air filter to trap solid particles and water droplets.

Also known as coalescing filters, these filter elements fit in SMC modular compressed air filters to remove oil and particles as small as 0.01 microns.

Also known as coalescing filters, these filter elements fit in Wilkerson modular compressed air filters to remove oil and fine particles.

Also known as coalescing filters, these filter elements fit in Norgren modular compressed air filters to remove oil and fine particles.

Also known as coalescing filters, these filter elements fit into Parker modular compressed air filters to remove oil and fine particles.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Mount these filters to a 35 mm DIN rail with the included brackets.

Housing and bowl are 316 stainless steel to handle extremely corrosive environments and meet NACE (National Association of Corrosion Engineers) specifications.

Eliminate small traces of oil vapor and its associated odor with these filters and then throw them away when you're done.

Use these filters in applications where high-quality air is critical. They remove particles down to 0.003 microns, eliminating small traces of oil vapor and its associated odor.

No need to buy and service two filters—these filters have a single element that removes both oil and particles.

Produce clean air for instrumentation and other applications, such as food or medical device manufacturing.

Remove bacteria, viruses, moisture, and other particles from compressed air and gases used in food, pharmaceutical, biotech, and electronics applications.

For a longer service life than brass and cast iron valves, these have a durable bronze body.

These valves automatically reduce a high, variable inlet pressure to a lower, stable outlet pressure.

To maintain contaminant-free standards in clean room environments, these valves come cleaned and bagged to Fed. Std. Class 100 and ISO Class 5 clean room standards and have a 316 stainless steel body with a smooth finish to resist dust collection.

Rated for more than double the temperature of standard pressure-regulating valves, these can withstand temperatures up to 550° F.

For extremely high-pressure applications in tight spots, these valves handle the same inlet pressures as other ultra-high-pressure-regulating valves within a smaller footprint.

A 316 stainless steel body provides exceptional corrosion resistance in wet conditions and harsh environments.

Our smallest pressure-regulating valve.

Regulate pressure in air and inert gas systems from your instrument panel—these valves have threads below the adjustment knob and come with a panel-mount nut.

Often used for pressure-vessel testing and other high-pressure applications, these valves can handle at least seven times the outlet pressure of standard tank-mount pressure-regulating valves.

Threads below the adjustment knob and an included panel-mount nut allow you to add these valves to your instrument panel.