McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    42 Products

    Alignment Lasers

    Image of Product. Front orientation. ZoomedIn view. Contains Annotated. Alignment Lasers. Alignment Lasers, Electric—Dot.
    Image of Product. Front orientation. Alignment Lasers. Alignment Lasers, Electric—Line.
    Image of Product. Front orientation. Alignment Lasers. Alignment Lasers, Electric—Crosshair Line.

    Electric—Dot

    Electric—Line

    Electric—Crosshair Line

    Project a bright, vivid reference point to hang light fixtures, align workbenches, or even guide your machine vision camera. These lasers are small enough to fit on virtually any machine.
    Electric—Dot
    Image of Product. Front orientation. ZoomedIn view. Contains Annotated. Alignment Lasers. Alignment Lasers, Electric—Dot.
    Image of Specification. Magnet/Fastener Mount for FDA Class II Laser. Front orientation. Fastener Mount. Alignment Lasers, Electric—Dot, Magnet Mount, For FDA Class II Laser Class.
    Image of Specification. Magnet/Fastener Mount for FDA Class IIIa Laser. Front orientation. Fastener Mount. Alignment Lasers, Electric—Dot, Magnet Mount, For FDA Class IIIa Laser Class.

    Magnet/Fastener

    Mount for FDA

    Class II Laser

    Magnet/Fastener Mount

    for FDA Class IIIa Laser

    Image of Specification. Magnetic/Fastener Mount for FDA Class IIIb Laser. Front orientation. Fastener Mount. Alignment Lasers, Electric—Dot, Magnet Mount, For FDA Class IIIb Laser Class.
    Image of Specification. Front orientation. Clamp Mount. Alignment Lasers.

    Magnetic/Fastener

    Mount for FDA

    Class IIIb Laser

    Clamp Mount

    Dot lasers work well for indicating a drill point and positioning workpieces on lathes, presses, and CNC machines. Those with multiple dot sizes are suitable for both long-range positioning and close-up precision tasks. Larger dot sizes are often used to install pipe over long distances. Twist the head to adjust the dot size.
    Red Laser—Red lasers are best viewed indoors and at short distances.
    Green Laser—Green lasers are ten times brighter than red lasers. They’re easy to view, even in brightly lit rooms, outdoor locations, and over long distances.
    5V DC—To power 5V DC lasers from an outlet, fit the barrel connector into an adapter. 5V lasers can also be used with a power distribution block, which lets you power up to seven lasers from an outlet using a single adapter.
    8V DC—To power 8V DC lasers from an outlet, fit the barrel connector into an adapter.
    DC—DC lasers can be hardwired to programmable logic controllers (PLCs) and timer relays, so you can automate when they turn on and off.
    Barrel Connection— For lasers with a barrel connector, you must cut off the connector to hardwire them.
    Overall
    Electrical
    Max. Laser
    Distance, ft.
    Leveling and Aligning
    Accuracy
    Dot Size @ Distance
    Laser Class
    Wavelength,
    nm
    Lg.
    Dia.
    Lens
    Material
    Temp.,
    ° F
    Connection
    No. of
    Blades
    Cord Lg.,
    ft.
    NEMA
    Type
    Includes
    Each
    Red Laser—5V DC
    100Not Rated1/32" @ 2 ft.FDA Class II6251 1/2"7/16"Plastic15 to 1202.5 mm ID Barrel—1——2073A110000000
     
    Red Laser—120V AC
    500-1/16" to 1/16" @ 100 ft.1/16" @ 2 ft.
    3/4" @ 50 ft.    		FDA Class IIIa6503 3/4"3/4"Glass32 to 90Straight Blade261-15
    		AC Adapter, Adjustment Screws7112N13000000
    1,000-1/16" to 1/16" @ 100 ft.3/8" @ 2 ft.FDA Class IIIa6503 3/4"3/4"Glass32 to 90Straight Blade261-15
    		AC Adapter7180N11000000
     
    Green Laser—8V DC
    5Not Rated3/32" @ 2 ft.FDA Class IIIb5152"1/2"Glass32 to 952.5 mm ID Barrel—1——2073A14000000
     
    Green Laser—120V AC
    5,000-1/16" to 1/16" @ 100 ft.1/32" @ 2 ft.
    1/4" @ 50 ft.    		FDA Class IIIa5326 1/2"1"Glass32 to 90Straight Blade261-15
    		AC Adapter, Adjustment Screws7112N11000000
     
    Accessories for Alignment Lasers
    Laser Mounts
    Clamp Mount—Clamp mounts fit pipe, tube, and conduit that is approximately 1" in diameter. They swivel from side to side, so you can fine-tune the position of the laser once it's mounted.
    Magnet/Fastener Mount—Magnet/fastener mounts attach to steel surfaces, so you don't have to drill holes in your machinery. They’ll hold the laser at a fixed angle.
    80° Pivot Angle—These mounts pivot 80°, so you can aim your laser without shifting the entire mount.
    For Laser Class
    Lg.
    Wd.
    Ht.
    Dia.
    Material
    Pivot
    Angle
    Tilt Range
    of Motion
    Each
    Clamp Mount
    FDA Class II3/4"2"2.4"—Anodized Aluminum——2073A320000000
     
    Magnet/Fastener Mount
    FDA Class II, IEC Class 1M0.88"2"1.89"—Anodized Aluminum—80°2073A17000000
    FDA Class IIIa——4 3/4"3"Plastic-Coated ABS/Plastic-Coated Stainless Steel360°180°20005A54000000
    FDA Class IIIb2"1/2"1.89"—Anodized Aluminum80°80°2073A18000000
     
    Plug-In Adapters
    Image of Product. Front orientation. Power Supplies. Alignment Lasers, .

    Voltage
    Electrical
    For Laser
    Voltage, V DC
    Input,
    V AC
    Output,
    V DC
    For Max. No.
    of Lasers
    Connection
    No. of
    Blades
    Cord Lg.,
    ft.
    NEMA
    Type
    Each
    512051Straight Blade241-15
    		2073A33000000
    812081Straight Blade241-15
    		2073A1500000
    Power Distribution Blocks
    Image of Product. Front orientation. Power Supplies. Alignment Lasers, .

    Connection
    Type
    For Laser
    Voltage, V DC
    For Max. No.
    of Lasers
    Input
    Output
    Each
    572.5 mm Barrel2.5 mm Barrel2073A340000000
    Electric—Line
    Image of Product. Front orientation. Alignment Lasers. Alignment Lasers, Electric—Line.
    Image of Specification. Front orientation. Fastener Mount. Alignment Lasers, Electric—Line.
    Image of Specification. Front orientation. Magnet Mount. Alignment Lasers, Electric—Line.
    Image of Specification. Front orientation. Fastener Mount. Alignment Lasers, Electric—Line, Magnet Mount.

    Fastener

    Mount

    Magnet

    Mount

    Magnet/Fastener

    Mount

    Line lasers work well for marking cut lines for saws, aligning rollers on conveyor belts, and checking that the edge on a machined part is straight. They project a line that is even and bright the entire length.
    Red Laser—Red lasers are best viewed indoors and at short distances.
    Green Laser—Green lasers are ten times brighter than red lasers. They’re easy to view, even in brightly lit rooms, outdoor locations, and over long distances.
    5V DC—To power 5V DC lasers from an outlet, fit the barrel connector into an adapter. 5V lasers can also be used with a power distribution block, which lets you power up to seven lasers from an outlet using a single adapter.
    DC—DC lasers can be hardwired to programmable logic controllers (PLCs) and timer relays, so you can automate when they turn on and off.
    Barrel Connection— For lasers with a barrel connector, you must cut off the connector to hardwire them.
    Overall
    Electrical
    Max. Laser
    Distance, ft.
    Leveling and Aligning
    Accuracy
    No. of
    Lines
    Line Size @
    Distance
    Laser Class
    Wavelength,
    nm
    Lg.
    Dia.
    Lens
    Material
    Temp.,
    ° F
    Connection
    No. of
    Blades
    Cord Lg.,
    ft.
    Enclosure
    Rating
    NEMA
    Type
    Includes
    Each
    Red Laser—5V DC
    10Not Rated119 1/2 ft. @ 10 ft.IEC Class 1M6251 7/8"7/16"Plastic15 to 1202.5 mm ID Barrel—1———2073A210000000
     
    Green Laser—12V DC
    150Not Rated111 1/2 ft. @ 10 ft.FDA Class IIIa5204"3/4"Glass0 to 140Hardwire—5IP67
    		—Fastener Mount6902N12000000
     
    Green Laser—120V AC
    150Not Rated111 1/2 ft. @ 10 ft.FDA Class IIIa5204"3/4"Glass0 to 140Straight Blade25IP67
    		1-15
    		AC Adapter, Fastener Mount6902N11000000
     
    Accessories for Alignment Lasers
    Laser Mounts
    Fastener Mount—Fastener mounts rotate in any direction, so you can swivel the laser to the correct angle for your job without having to reposition the entire mount.
    Magnet Mount—Magnet mounts attach to steel surfaces, so you don't have to drill holes in your machinery. They’ll hold the laser at a fixed angle.
    Magnet/Fastener Mount—Magnet/fastener mounts attach to steel surfaces, so you don't have to drill holes in your machinery. They’ll hold the laser at a fixed angle.
    For Laser Class
    Lg.
    Wd.
    Ht.
    Material
    Tilt Range
    of Motion
    Each
    Magnet/Fastener Mount
    FDA Class II, IEC Class 1M0.88"2"1.89"Anodized Aluminum80°2073A170000000
     
    Fastener Mount
    FDA Class IIIa1"1"3 1/2"Aluminum360°5198T9100000
     
    Magnet Mount
    FDA Class IIIa1"1"1 1/2"Aluminum360°5198T92000000
     
    Plug-In Adapters
    Image of Product. Front orientation. Power Supplies. Alignment Lasers, .

    Voltage
    Electrical
    For Laser
    Voltage, V DC
    Input,
    V AC
    Output,
    V DC
    For Max. No.
    of Lasers
    Connection
    No. of
    Blades
    Cord Lg.,
    ft.
    NEMA
    Type
    Each
    512051Straight Blade241-15
    		2073A33000000
    Power Distribution Blocks
    Image of Product. Front orientation. Power Supplies. Alignment Lasers, .

    Connection
    Type
    For Laser
    Voltage, V DC
    For Max. No.
    of Lasers
    Input
    Output
    Each
    572.5 mm Barrel2.5 mm Barrel2073A340000000
    Electric—Crosshair Line
    Image of Product. Front orientation. Alignment Lasers. Alignment Lasers, Electric—Crosshair Line.
    Image of Specification. Front orientation. Magnet Mount. Alignment Lasers, Electric—Crosshair Line.

    Magnet

    Mount

    Crosshair line lasers project a central reference point, as well as vertical and horizontal lines, so you don't have to reposition the laser when aligning in multiple directions. They are commonly used to position shafts, bearings, and couplings.
    Red Laser—Red lasers are best viewed indoors and at short distances.
    Green Laser—Green lasers are ten times brighter than red lasers. They’re easy to view, even in brightly lit rooms, outdoor locations, and over long distances.
    DC—DC lasers can be hardwired to programmable logic controllers (PLCs) and timer relays, so you can automate when they turn on and off.
    Barrel Connection— For lasers with a barrel connector, you must cut off the connector to hardwire them.
    Overall
    Max. Laser
    Distance, ft.
    Leveling and Aligning
    Accuracy
    Line Size @
    Distance
    Laser Class
    Wavelength,
    nm
    Lg.
    Dia.
    Lens
    Material
    Temp.,
    ° F
    Connection Type
    Cord Lg.,
    ft.
    Includes
    Each
    Red Laser—4.5V DC
    50Not Rated4 1/4 ft. @ 10 ft.FDA Class II6354"3/4"Glass15 to 1202.1 mm ID Barrel3AC Adapter7180N130000000
     
    Green Laser—4.5V DC
    50Not Rated4 1/4 ft. @ 10 ft.FDA Class II5234"3/4"Glass15 to 1202.1 mm ID Barrel3AC Adapter7180N14000000
     
    Laser Mounts
    Magnet Mount—Magnet mounts attach to steel surfaces, so you don't have to drill holes in your machinery. They’ll hold the laser at a fixed angle.
    For Laser
    Class
    Lg.
    Wd.
    Ht.
    Material
    Pivot
    Angle
    Tilt Range
    of Motion
    Each
    Magnet Mount
    FDA Class II1 1/2"1 1/2"2 1/2"Anodized Aluminum90°180°2073A44000000
     

    Compact Machine-Mount Alignment Lasers

    Image of Product. Front orientation. Alignment Lasers. Compact Machine-Mount Alignment Lasers.
    Even with their built-in mount, these lasers only take up as much space as two dice. Use them to project a bright, vivid reference point to align tools or guide machine vision cameras and robots. Since you can adjust their dot size, these lasers work well for both long-range positioning and close-up precision tasks. Larger dot sizes are often used to install pipe over long distances. The dot is red, so it’s best viewed indoors.
    Electric—Dot
    Overall
    Electrical
    Mounting
    Holes
    Max. Laser
    Distance, ft.
    Leveling and Aligning
    Accuracy
    Dot Size @ Distance
    Laser Class
    Wavelength,
    nm
    Lg.
    Wd.
    Ht.
    Connection
    No. of
    Blades
    Cord Lg.,
    ft.
    Mount
    Type
    Mounting Fasteners
    Included
    No.
    of
    Dia.
    Features
    NEMA
    Type
    Includes
    Each
    Red Laser—120V AC
    500-1/8" to 1/8" @ 130 ft.1/16" @ 2 ft.
    2 1/2" @ 500 ft.    		FDA Class IIIa6501 1/4"1"1 3/16"Straight Blade26Screw OnNo81/8"Encased Diode1-15
    		AC Adapter2055A210000000
     
    Laser Converters
    Image of Product. Front orientation. Laser Converters. 90° Beam Splitters.
    Image of Product. Front orientation. Laser Converters. Dot-to-Crosshair Converters.
    Image of Product. Front orientation. Laser Converters. Dot-to-Dotted Line Converters.
    Image of Product. Front orientation. Laser Converters. Dot-to-Line Converters.

    90° Beam Splitters

    Dot-to-Crosshair

    Converters

    Dot-to-Dotted

    Line Converters

    Dot-to-Line

    Converters

    Component
    Line Size @
    Distance
    Dotted Line Size
    @ Distance
    Crosshair Size
    @ Distance
    Each
    90° Beam Splitter———20005A1150000000
    Dot-to-Crosshair Converter——2 1/4" @ 1 ft.20005A33000000
    Dot-to-Dotted Line Converter—2" @ 1 ft.—20005A112000000
    Dot-to-Line Converter6" @ 1 ft.——20005A11600000
    Dot-to-Line Converter8" @ 1 ft.——20005A11300000
    Dot-to-Line Converter12" @ 1 ft.——20005A32000000
    Dot-to-Line Converter16" @ 1 ft.——20005A11400000
    Dot-to-Line Converter28" @ 1 ft.——20005A11100000

    Dock Alignment Lasers

    Image of ProductInUse. Front orientation. Alignment Lasers. Dock Alignment Lasers.
    Image of Product. Front orientation. Alignment Lasers. Dock Alignment Lasers.
    Help drivers center their trucks as they dock, no matter the weather or time of day. They shoot parallel bright green lines that can be seen up to 150 ft. away, even in direct sunlight. Where painted lines are less visible from snow, rain, fallen leaves, or darkness, these lasers stay visible. The included steel enclosures protect the laser from dust, debris, and the elements. The laser shoots through a hole in the side of the enclosure. You can also use these lasers indoors.
    DC—DC lasers can be connected to a controller, such as a programmable logic controller (PLC), to automate when the lasers turn on and off.
    Overall
    Enclosure
    Mounting
    Holes
    Enclosure
    Mounting Holes
    Voltage
    Leveling and Aligning
    Accuracy
    Max. Laser
    Distance, ft.
    Line Size @
    Distance
    Laser Class
    Wavelength,
    nm
    Lg.
    Wd.
    Ht.
    Ht.
    Wd.
    Dp.
    Mounting Fasteners
    Included
    No.
    of
    Lg.
    Wd.
    No.
    of
    Dia.
    Cord Lg.,
    ft.
    Includes
    Each
    With 2 Straight-Blade Plug
    110V AC-1/4" to 1/4" @ 150 ft.1501/2" @ 50 ft.FDA Class IIIa5204"2 1/2"5"8"8"4"No10.4"0.313"40.26"12Two Lasers, Two Steel Enclosures6696N11000000000
     
    With Screw-Terminal Wire Connection
    12V DC to 24V DC-1/4" to 1/4" @ 150 ft.1501/2" @ 50 ft.FDA Class IIIa5204"2 1/2"5"8"8"4"No10.4"0.313"40.26"—Two Lasers, Two Steel Enclosures6696N1200000000
     

    Dust- and Moisture-Resistant Alignment Lasers

    Image of Product. Front orientation. Alignment Lasers. Dust- and Moisture-Resistant Alignment Lasers, Electric—Dot.
    Image of Product. Front orientation. Alignment Lasers. Dust- and Moisture-Resistant Alignment Lasers, Electric—Line.

    Electric—Dot

    Electric—Line

    IP67 rated, these lasers have a lens that's sealed to keep out dust and water. They're often used to create reference points for machine vision cameras and robots.
    Electric—Dot
    Image of Product. Front orientation. Alignment Lasers. Dust- and Moisture-Resistant Alignment Lasers, Electric—Dot.
    Image of Specification. Front orientation. Fastener Mount. Dust- and Moisture-Resistant Alignment Lasers, Electric—Dot.
    Image of Specification. Front orientation. Magnet Mount. Dust- and Moisture-Resistant Alignment Lasers, Electric—Dot.

    Fastener

    Mount

    Magnet

    Mount

    Dot lasers work well for indicating a drill point and positioning workpieces on lathes, presses, and CNC machines.
    Red Laser—Red lasers are best viewed indoors and at short distances.
    Green Laser—Green lasers are ten times brighter than red lasers. They’re easy to view, even in brightly lit rooms, outdoor locations, and over long distances.
    DC—Hardwire DC lasers to programmable logic controllers (PLCs) and timer relays to automate when they turn on and off.
    Overall
    Electrical
    Max. Laser
    Distance, ft.
    Leveling and Aligning
    Accuracy
    Dot Size @
    Distance
    Laser Class
    Wavelength,
    nm
    Lg.
    Dia.
    Connection
    No. of
    Blades
    Cord Lg.,
    ft.
    Enclosure
    Rating
    NEMA
    Type
    Includes
    Each
    Red Laser—4.8V DC to 36V DC
    500-1/8" to 1/8" @ 100 ft.3/8" @ 100 ft.FDA Class IIIa6353 1/4"3/4"Hardwire——IP67
    		——5198T720000000
     
    Red Laser—120V AC
    500-1/8" to 1/8" @ 100 ft.3/8" @ 100 ft.FDA Class IIIa6353 1/4"3/4"Straight Blade25IP67
    		1-15
    		AC Adapter5198T71000000
     
    Green Laser—12V DC to 24V DC
    500-1/8" to 1/8" @ 100 ft.1/4" @ 100 ft.FDA Class IIIa5204"3/4"Hardwire——IP67
    		——5198T55000000
     
    Green Laser—120V AC
    500-1/8" to 1/8" @ 100 ft.3/8" @ 100 ft.FDA Class IIIa5324"3/4"Straight Blade25IP67
    		1-15
    		AC Adapter5198T54000000
     
    Accessories for Alignment Lasers
    Laser Mounts
    Fastener Mount—Fastener mounts rotate in any direction, so you can swivel the laser to the correct angle for your job without having to reposition the entire mount.
    Magnet Mount—Magnet mounts attach to steel surfaces, so you don't have to drill holes in your machinery. They’ll hold the laser at a fixed angle.
    For Laser
    Class
    Lg.
    Wd.
    Ht.
    Material
    Tilt Range
    of Motion
    Each
    Fastener Mount
    FDA Class IIIa1"1"3 1/2"Aluminum360°5198T91000000
     
    Magnet Mount
    FDA Class IIIa1"1"1 1/2"Aluminum360°5198T92000000
     
    Laser Converters
    Image of Product. Front orientation. Laser Converters. Dust- and Moisture-Resistant Alignment Lasers, Dot Size Converters.
    Image of Product. Front orientation. Laser Converters. Dust- and Moisture-Resistant Alignment Lasers, Dot-to-Line Converters.

    Dot Size

    Converters

    Dot-to-Line

    Converters

    Component
    Includes
    Dotted Line Size
    @ Distance
    Each
    Dot Size ConverterOne Size-Converting Lens for 1/16" Dot Size
    One Size-Converting Lens for 1/8" Dot Size
    One Size-Converting Lens for 3/32" Dot Size    		—5198T86000000
    Dot-to-Line Converter—2 ft. @ 18 ft.5198T85000000
    Electric—Line
    Image of Product. Front orientation. Alignment Lasers. Dust- and Moisture-Resistant Alignment Lasers, Electric—Line.
    Image of Specification. Front orientation. Fastener Mount. Dust- and Moisture-Resistant Alignment Lasers, Electric—Line.

    Fastener

    Mount

    Line lasers work well for marking cut lines for saws, aligning rollers on conveyor belts, and checking that the edge on a machined part is straight. They project a line that is even and bright along the entire length.
    Red Laser—Red lasers are best viewed indoors and at short distances.
    Green Laser—Green lasers are ten times brighter than red lasers. They’re easy to view, even in brightly lit rooms, outdoor locations, and over long distances.
    5V DC—For 5V DC lasers, you'll need to cut off their plug to hardwire them. Their plug fits into an AC adapter.
    8V DC—For 8V DC lasers, you'll need to cut off their plug to hardwire them. Their plug fits into an AC adapter.
    DC—Hardwire DC lasers to programmable logic controllers (PLCs) and timer relays to automate when they turn on and off.
    Overall
    Max. Laser
    Distance, ft.
    No. of
    Lines
    Line Size @
    Distance
    Laser Class
    Wavelength,
    nm
    Lg.
    Dia.
    Connection Type
    Cord Lg.,
    ft.
    Enclosure
    Rating
    Each
    Red Laser—5V DC
    512 1/2 ft. @ 5 ft.FDA Class IIIb6354 1/2"3/4"2.5 mm ID Barrel4IP67
    		5198T17000000000
     
    Green Laser—8V DC
    512 1/2 ft. @ 5 ft.FDA Class IIIb5204 1/2"3/4"2.5 mm ID Barrel4IP67
    		5198T1800000000
     
    Accessories for Alignment Lasers
    Laser Mounts
    Fastener Mount—These mounts tilt up to 34°, so you can make minor adjustments to the laser angle without repositioning the entire mount.
    For Laser
    Class
    Lg.
    Wd.
    Ht.
    Material
    Tilt Range
    of Motion
    Each
    Fastener Mount
    FDA Class IIIb2 1/2"1"2 1/2"Anodized Aluminum34°2073A160000000
     
    Plug-In Adapters
    Image of Product. Front orientation. Power Supplies. Dust- and Moisture-Resistant Alignment Lasers, .

    Voltage
    Electrical
    For Laser
    Voltage, V DC
    Input,
    V AC
    Output,
    V DC
    For Max. No.
    of Lasers
    Connection
    No. of
    Blades
    Cord Lg.,
    ft.
    NEMA
    Type
    Each
    512051Straight Blade241-15
    		2073A33000000
    812081Straight Blade241-15
    		2073A1500000

    Table-Mount Alignment Lasers

    Image of ProductInUse. Front orientation. Contains Annotated, Border. Alignment Lasers. Table-Mount Alignment Lasers.
    Image of Product. Front orientation. Alignment Lasers. Table-Mount Alignment Lasers, Electric—Dot.

    Electric—Dot

    Position these lasers directly on a flat surface. Lasers project a red dot that is best viewed indoors. Twist the knob to focus the dot so it is more precise at short distances.
    Electric—Dot
    Image of Product. Front orientation. Alignment Lasers. Table-Mount Alignment Lasers, Electric—Dot.
    Image of Specification. Front orientation. Fastener Mount. Table-Mount Alignment Lasers, Electric—Dot, Magnet Mount.

    Magnet/Fastener Mount

    Overall
    Electrical
    Mounting
    Holes
    Max. Laser
    Distance, ft.
    Leveling and Aligning
    Accuracy
    Dot Size @ Distance
    Laser Class
    Wavelength,
    nm
    Lg.
    Wd.
    Ht.
    Connection
    No. of
    Blades
    Cord Lg.,
    ft.
    Mounting Fasteners
    Included
    No.
    of
    Dia.
    Each
    Red Laser—120V AC
    300-1/8" to 1/8" @ 170 ft.1/16" @ 2 ft.
    3" @ 300 ft.    		FDA Class IIIa6504"1 1/2"1"Straight Blade26No40.201"20005A430000000
     
    Accessories for Alignment Lasers
    Laser Mounts
    For Laser
    Class
    Ht.
    Dia.
    Material
    Pivot
    Angle
    Tilt Range
    of Motion
    Each
    Magnet/Fastener Mount
    FDA Class IIIa4 3/4"3"Plastic-Coated ABS/Plastic-Coated Stainless Steel360°180°20005A540000000
     
    Laser Converters
    Image of Product. Front orientation. Laser Converters. 90° Beam Splitters.
    Image of Product. Front orientation. Laser Converters. Dot-to-Crosshair Converters.
    Image of Product. Front orientation. Laser Converters. Dot-to-Dotted Line Converters.
    Image of Product. Front orientation. Laser Converters. Dot-to-Line Converters.

    90° Beam Splitters

    Dot-to-Crosshair

    Converters

    Dot-to-Dotted

    Line Converters

    Dot-to-Line

    Converters

    Component
    Line Size @
    Distance
    Dotted Line Size
    @ Distance
    Crosshair Size
    @ Distance
    Each
    90° Beam Splitter———20005A1150000000
    Dot-to-Crosshair Converter——2 1/4" @ 1 ft.20005A33000000
    Dot-to-Dotted Line Converter—2" @ 1 ft.—20005A112000000
    Dot-to-Line Converter6" @ 1 ft.——20005A11600000
    Dot-to-Line Converter8" @ 1 ft.——20005A11300000
    Dot-to-Line Converter12" @ 1 ft.——20005A32000000
    Dot-to-Line Converter16" @ 1 ft.——20005A11400000
    Dot-to-Line Converter28" @ 1 ft.——20005A11100000

    High-Temperature Alignment Lasers

    Image of ProductInUse. Front orientation. Contains Annotated. Alignment Lasers. High-Temperature Alignment Lasers.
    These lasers project a bright, accurate reference point while resisting heat from furnaces, kilns, and other machinery that runs hot. Use them for everything from aligning bores, rods, and other components in engines to marking workpieces for spot welds. The glass lens won’t warp or melt like a plastic one might, so the dot stays precise and clear.
    Lasers project a red light that is best viewed indoors. They aren't adjustable, so the dot will get bigger as you move the laser further away. These lasers have a plug that fits into an included AC adapter, but they can also be hardwired by cutting off the plug. Hardwire them to programmable logic controllers (PLCs) and timer relays to automate when they turn on and off.
    Electric—Dot
    Overall
    Max. Laser
    Distance, ft.
    Dot Size @
    Distance
    Laser Class
    Wavelength,
    nm
    Lg.
    Dia.
    Temp.,
    ° F
    Connection Type
    Cord Lg.,
    ft.
    Enclosure
    Rating
    NEMA
    Type
    Each
    Red Laser—5V DC
    52 3/4" @ 2 ft.FDA Class IIIb6605 1/2"3/4"60 to 1752.5 mm ID Barrel2IP67
    		1-15
    		6771N11000000000
     
    Accessories and Replacements for Alignment Lasers
    Laser Mounts
    Image of Specification. Front orientation. Fastener Mount. High-Temperature Alignment Lasers, Electric—Dot.

    Fastener

    Mount

    These mounts tilt up to 34°, so you can make minor adjustments to the laser angle without repositioning the entire mount.
    For Laser
    Class
    Lg.
    Wd.
    Ht.
    Material
    Tilt Range
    of Motion
    Each
    Fastener Mount
    FDA Class IIIb2 1/2"1"2 1/2"Anodized Aluminum34°2073A160000000
     
    Plug-In Adapters
    Image of Product. Front orientation. Power Supplies. High-Temperature Alignment Lasers.
    Voltage
    Electrical
    For Laser
    Voltage, V DC
    Input,
    V AC
    Output,
    V DC
    For Max. No.
    of Lasers
    Connection
    No. of
    Blades
    Cord Lg.,
    ft.
    NEMA
    Type
    Each
    512051Straight Blade241-15
    		2073A33000000
    back to top