Aluminized Sleeves | McMaster-Carr

Filter by

Finish

Aluminized

Color

Aluminum

System of Measurement

Maximum Temperature

Performance

Sleeving Type

Material

Wall Thickness

Liner Material

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

Minimum Temperature

REACH

RoHS

Sleeving Construction

For Use On

Length

Container Type

Container Size

Application

For Use Outdoors

Solution Type

Appearance

Formulation

7 Products

Heat-Reflecting Wire Sleeving

Protect wire, cable, and hose from heat radiating off hot objects, such as molten metal. Coated in aluminized PET, also known as Mylar, this sleeving reflects most heat without letting it pass through, so it can handle intermittent radiant heat up to 2000° F. The liner is a blend of aramid and Kevlar that withstands continuous temperatures up to 650° F. This sleeving is stitched together with PTFE-coated silica fiberglass threads, which are just as heat resistant as the sleeving. It doesn’t stretch, so it’s best to know the exact diameter of the items you’re protecting.

Aluminized PET with Kevlar Fabric Liner

Wall Thk.	Temp. Range, ° F		5 ft. Long	10 ft. Long	25 ft. Long	100 ft. Long



1/2"	1/16"	-20 to 650	6522N101	000000	000000	0000000	0000000


3/4"	1/16"	-20 to 650	6522N102	00000	00000	000000	000000
1"	1/16"	-20 to 650	6522N103	00000	000000	000000	000000

Rust-Blocking Urethane Protective Coatings for Metal

Apply these coatings directly to rust to prevent it from spreading and to stop new rust from forming. Often used on containers, trailers, and in marine restoration, they create a durable, impact-resistant surface that permanently stops rust. Remove loose rust and dirt before application. Apply with a brush, roller, or sprayer.

Urethane Rubber—Can

Image of Product. Front orientation. Protective Coatings. Rust-Blocking Urethane Protective Coatings for Metal.

Cannot Be Sold To—Coatings cannot be sold to the regions listed because they exceed local regulatory limits on VOC (volatile organic compounds).

		Dry Time, hr.
Container Size	Solution Type	Touch	Overall	Approx. Coverage @ Thk.	Mixing Req.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Color	Cannot Be Sold To		Each



	1 qt.	Solvent Based	4	8	450 ft² @ 2 mil	No	450	45 to 80	Yes	Steel, Iron	Gloss Aluminum	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA; Ventura County, CA	2545N7	000000


	1 gal.	Solvent Based	4	8	450 ft² @ 2 mil	No	450	45 to 80	Yes	Steel, Iron	Gloss Aluminum	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA; Ventura County, CA	2545N5	000000

Epoxy Protective Coatings for Metal

Thicker than polyurethane and paint, these coatings have high moisture resistance and protect against abrasion and chemicals. Coatings may chalk with exposure to sunlight.

Thinners cannot be sold to Canada due to import regulations.

Epoxy—Can

2 gal. Container—Apply coatings in a two-gallon can with a brush, roller, or sprayer. The size listed is the combined total of the two parts.

Cannot Be Sold To—Coatings that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).

		Dry Time, hr.
Container Size, gal.	Solution Type	Touch	Overall	Approx. Coverage @ Thk.	Mixing Req.	Mix Ratio	Application Time After Mixing, hr.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Cannot Be Sold To	Color		Each



	2	Solvent Based	8	16	220 ft² @ 5 mil	Yes	1:1	2.5	300	50 to 100	Yes	Steel, Iron, Masonry, Concrete	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA	Gloss Aluminum	7903T1	0000000

Thinners