We will reply to your message within an hour.
More
The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.
These sheets and bars are precision ground either on all six sides or just on the top and bottom.
An anodized coating bonds to the aluminum surface to improve wear and corrosion resistance.
The thickness is oversized to allow for finishing to exact requirements.
One side of these sheets and bars is polished to either a brushed finish or a mirror-like finish.
Weld these aluminum triangles to reinforce joints in structural applications.
More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.
6101 aluminum is chiefly used as a lightweight and economical alternative to copper in electrical applications, such as bus bars in switchboards and battery banks.
As the strongest multipurpose aluminum we offer, 6013 aluminum has the same good corrosion resistance, weldability, and machinability as 6061 with increased strength. 6013 is often fabricated into high-stress machine parts.
Known for being one of the easiest types of aluminum to weld, 5052 is also recognized for its ability to resist salt water. It's widely used for the bodies of boats, buses, trucks, and trailers, as well as for chemical drums.
3000 series aluminum stands up to outdoor use, as well as exposure to chemicals. It offers a good combination of strength, formability, and weldability. It's often used for storage tanks, heat exchangers, garage doors, and general sheet metal work.
Includes one 1-1/2"×3"×0.032" thick piece of each texture: weave, diamond, and tread.
One side of these sheets is painted in your choice of gloss color, while the other side is painted gloss white.
The textured surface on these sheets increases rigidity and hides fingerprints and dents.
The honeycomb design provides a higher strength-to-weight ratio than solid sheets.
A honeycomb core is bonded between two aluminum sheets for rigidity.
These sheets are tempered to a 1/2-hard or full-hard state to make them over twice as strong as standard 1100 aluminum.
Made of 1000 series aluminum which is 99% pure, this aluminum offers superior formability, corrosion resistance, and electrical conductivity. It's frequently fabricated into raceways, decorative trim, and other parts where strength and hardness are not required.
Use this foil as a blanket to disperse heat evenly in high-vacuum systems, as well as in clean rooms and other controlled environments where dust and oil could jeopardize a system.
5086 aluminum is used on ships, oil rigs, tanks, and pressure vessels because of its excellent saltwater resistance and formability.
A black, gold, or silver anodized finish protects this 5005 aluminum from wear and abrasion.
Highly corrosion resistant, 5083 is largely used around salt water for building ships and oil rigs. It maintains its strength in extreme cold, so it's also used to make cryogenic pressure vessels and tanks.
Stronger than other marine-grade aluminum, 5456 is often used for pressure vessels and storage tanks in saltwater environments.
While 2024 aluminum was initially designed for structural components in aircraft, it's now widely used when a high strength-to-weight ratio is needed, such as for gears, shafts, and fasteners. It offers similar performance to 7075 aluminum, but it’s not as strong.
Also known as flat stock, these sheets and bars are precision ground on the top and bottom.
These sheets are clad in 1230 aluminum for an added layer of corrosion resistance.
Originally developed for aircraft frames, uses for 7075 aluminum now include keys, gears, and other high-stress parts. It is often used as a replacement for 2024 aluminum because it’s stronger and provides similar performance in all other aspects.
Choose between sheets and bars that are precision ground on all six sides or just on the top and bottom.
Create molds for vacuum-forming and thermoforming applications. Metapor aluminum is porous to let air and moisture escape, which prevents bubbles and blemishes.
Designed for use as a production injection mold and blow mold, tk Ultra 7 is extremely strong with a hard surface and excellent thermal conductivity. It’s comparable to QC-10 aluminum.
2011 has the best machinability of all the aluminum alloys. It is the most selected aluminum for screws, tube fittings, hose parts, and other items that require extensive machining.
Substitute 7050 aluminum for 7075 in structural applications when high stress-corrosion resistance is required. It is the same material that's used for bulkheads and fuselage frames.
MIC6 is cast from a high-strength 7000-series aluminum, then stress relieved to maintain dimensional stability during high-speed machining.
Made of 5083 aluminum, these cast tool and jig plates are more corrosion resistant and respond better to anodizing than MIC6. This material is comparable to Alca 5 and ATP 5.
Air is injected into the casting of this aluminum to reduce weight and create a crater-like appearance. This foam is often used for sound insulation and architectural facades.
An aluminum honeycomb core sandwiched between carbon fiber keeps these sheets strong yet lightweight.
Thickness and width are oversized to allow for finishing.
These bars are precision ground on the top and bottom for a tight thickness tolerance of ±0.002".
Cut this stock into custom shapes to fit your application.
Keep shim stock in a variety of thicknesses on hand with these sets. Cut into custom shapes to fit your application.
A durable acrylic adhesive keeps this shim stock from sliding out of place. Cut it into custom shapes to fit your application.
Cut this shim stock into custom shapes to fit your application. Stock is made of layers of material bonded with adhesive; remove layers with a utility knife until you get the thickness you need.
This shim stock is color coded by thickness for easy identification. Cut it into custom shapes to fit your application.
Keep shim stock in a variety of thicknesses on hand with these sets, which are color coded by thickness for easy identification. Cut them into custom shapes to fit your application.
Create a custom shim to fit your application.
Identify equipment by engraving or stamping one of these sturdy metal tags and hanging it with a wire.
Color code equipment and inventory.
These tags have a large hole for easy hanging. Also known as miners' checks.
Metal tags are more durable than plastic tags.
Specify a starting number.
These sheets have good corrosion resistance, weldability, and formability. Aluminum is lightweight.
Hexagonal holes provide a large open area for high-flow applications.
Harder and stronger than our other aluminum perforated sheets, these sheets have greater wear resistance.
Also known as space cloth, wires are crimped where they intersect to maintain an accurate opening size when used with heavy materials. The crimping process also adds strength and rigidity.
Choose aluminum wire cloth for good corrosion resistance at a lighter weight than steel or stainless steel.
Close off openings in structures while allowing air to pass through.
No need to prepare this material before machining parts in dovetail vises—the dovetails and locating slots are already cut in.