Male Fabric Snap Halves with Tapping Screw Stud
![](/prerenderstable/mvPRE/contents/gfx/imagecache/957/95707a781p1-b02-digital@halfx_636922162655918057.png?ver=imagenotfound)
Use these snaps in drilled holes when you need to fasten a fabric snap to a solid surface. Pair them with a standard female snap half or a female/male dual-sided snap (sold separately) to create a complete snap. The tapping screw stud cuts its own threads in a pilot hole and the snap has a Phillips drive for easy installation.
18-8 stainless steel snaps have good corrosion resistance and are mildly magnetic.
Brass snaps are rust resistant, electrically conductive, and nonmagnetic.
For technical drawings and 3-D models, click on a part number.
Screw Size | Thread Lg. | Snap Dia. | Screw Material | For Use In | Drive Size | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||
---|---|---|---|---|---|---|---|---|
No. 8 | 3/8" | 5/8" | 18-8 Stainless Steel | Aluminum, Brass, Composite Board, Copper, Fiberglass, Particleboard, Plywood, Steel, Titanium, Wood | No. 2 | 10 | 000000000 | 00000 |
No. 8 | 5/8" | 5/8" | 18-8 Stainless Steel | Aluminum, Brass, Composite Board, Copper, Fiberglass, Particleboard, Plywood, Steel, Titanium, Wood | No. 2 | 10 | 000000000 | 0000 |
Nickel-Plated Brass | ||||||||
No. 8 | 3/8" | 5/8" | 18-8 Stainless Steel | Aluminum, Brass, Composite Board, Copper, Fiberglass, Particleboard, Plywood, Steel, Titanium, Wood | No. 2 | 10 | 000000000 | 0000 |
No. 8 | 5/8" | 5/8" | 18-8 Stainless Steel | Aluminum, Brass, Composite Board, Copper, Fiberglass, Particleboard, Plywood, Steel, Titanium, Wood | No. 2 | 10 | 000000000 | 0000 |
No. 10 | 5/8" | 5/8" | 18-8 Stainless Steel | Aluminum, Brass, Composite Board, Copper, Fiberglass, Particleboard, Plywood, Steel, Titanium, Wood | No. 2 | 10 | 000000000 | 0000 |
Fabric Snaps with Threaded Stud
![](/prerenderstable/mvPRE/contents/gfx/imagecache/957/95707a870-@halfx_637177823977496950.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/957/95707a685-@halfx_637177823912313831.png?ver=imagenotfound)
Use these snaps in threaded holes when you need to fasten a fabric snap to a solid surface. Pair them with a standard female snap half or a female/male dual-sided snap (sold separately) to create a complete snap. The threaded stud installs in threaded holes. Snaps have a Phillips drive for easy installation.
18-8 stainless steel snaps have good corrosion resistance and are mildly magnetic.
Brass snaps are rust resistant, electrically conductive, and nonmagnetic.
For technical drawings and 3-D models, click on a part number.
Style | Thread Size | Thread Lg. | Snap Dia. | Screw Material | For Use In | Drive Size | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||||||||
---|---|---|---|---|---|---|---|---|---|
A | 8-32 | 3/16" | 1/2" | 18-8 Stainless Steel | Aluminum, Brass, Copper, Fiberglass, Steel, Titanium | No. 2 | 10 | 000000000 | 00000 |
A | 8-32 | 1/2" | 1/2" | 18-8 Stainless Steel | Aluminum, Brass, Copper, Fiberglass, Steel, Titanium | No. 2 | 10 | 000000000 | 00000 |
Nickel-Plated Brass | |||||||||
A | 8-32 | 3/8" | 1/2" | Brass | Aluminum, Brass, Copper, Fiberglass, Steel, Titanium | No. 2 | 10 | 000000000 | 0000 |
A | 8-32 | 5/8" | 1/2" | Brass | Aluminum, Brass, Copper, Fiberglass, Steel, Titanium | No. 2 | 10 | 000000000 | 0000 |
B | 10-32 | 3/8" | 5/8" | Brass | Aluminum, Brass, Copper, Fiberglass, Steel, Titanium | No. 2 | 10 | 000000000 | 0000 |
Fabric Snaps with Drilling Screw Stud
![](/prerenderstable/mvPRE/contents/gfx/imagecache/957/95707a780p1-b02-digital@halfx_636922161312146800.png?ver=imagenotfound)
When you need to fasten a fabric snap to a solid surface, drive these snap halves into place and pair with a standard female snap half or a female/male dual-sided snap (sold separately) to create a compete snap. The drilling screw stud drills its own hole and the snap has a Phillips drive for easy installation.
For technical drawings and 3-D models, click on a part number.
Carabiners—Not for Lifting
![](/prerenderstable/mvPRE/contents/gfx/imagecache/765/765116_21599684715@halfx_637352635587416517.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/433/4330101599684714@halfx_637352635554864164.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/4x-/4x-i168-3885t11--5337a262daf1610558260-p9@halfx_637461336102699968.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/388/3885t11-carabiners-straight@halfx_1687960260.png?ver=imagenotfound)
Latch
Position
Quickly connect and disconnect these carabiners—they don’t lock.
Aluminum carabiners are more corrosion resistant and lightweight than zinc-plated carabiners. Anodized aluminum carabiners offer excellent corrosion resistance.
Screw-Locking Carabiners—Not for Lifting
![](/prerenderstable/mvPRE/contents/gfx/imagecache/321/3216t22-@halfx_637263600181876998.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/321/3216t24-@halfx_637263601287300768.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/321/3216t330-@halfx_637263602281492377.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/321/3216t530-@halfx_637263602137710122.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/329/3293t12_a41d8d38-77ab-4f20-a115-58e24264b095@halfx_1684527379.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/i13/i133-3216t22-1610040704-p9@halfx_637456159272008975.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/321/3216t22-screw-straight @halfx_1687960943.png?ver=imagenotfound)
Latch
Position
![](/prerenderstable/mvPRE/contents/gfx/imagecache/321/3216t22-screw-tilt @halfx_1687960943.png?ver=imagenotfound)
Latch
Position
The most secure carabiner we offer, these carabiners won’t accidentally open when rope slides because you need to unscrew the latch to unlock them.
Aluminum carabiners are more lightweight and resist corrosion better than zinc-plated steel carabiners. Anodized aluminum carabiners have excellent corrosion resistance.
Style 5 carabiners have a spring-loaded wire to keep rope secured to one end. Lift the wire to release the rope. When you let go, the wire springs back into place.
Carabiners with an offset latch open to the side, giving you more space to attach large items.
Carabiners with a locking indicator have a symbol that is covered when the carabiner is fully locked and exposed when it is not.
Capacity, lbs. | Thick. | Opening Wd. | Inside Lg. | Narrow-End Inside Wd. | Open Latch Position | Locking Indicator | Color | Each | ||
Aluminum | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
1 | 400 | 5/16" | 11/16" | 2 3/4" | 1/2" | Straight | No | __ | 0000000 | 000000 |
1 | 1,200 | 3/8" | 11/16" | 3 5/16" | 1/2" | Straight | No | __ | 0000000 | 00000 |
1 | 1,600 | 7/16" | 15/16" | 4 1/16" | 11/16" | Straight | No | __ | 0000000 | 00000 |
2 | 2,200 | 1/2" | 1 1/16" | 3 1/2" | 1 1/16" | Straight | No | __ | 0000000 | 00000 |
2 | 6,700 | 1/2" | 1" | 3 5/8" | 1 7/16" | Straight | No | __ | 0000000 | 00000 |
4 | 5,100 | 1/2" | 1 3/16" | 3 7/8" | 1" | Straight | No | __ | 0000000 | 00000 |
4 | 5,600 | 1/2" | 15/16" | 3 7/16" | 15/16" | Straight | No | __ | 0000000 | 00000 |
Anodized Aluminum | ||||||||||
2 | 6,500 | 1/2" | 1" | 3 1/2" | 1 5/16" | Offset | Yes | Red | 0000000 | 00000 |
3 | 5,300 | 7/16" | 1" | 3 1/2" | 1 1/2" | Offset | Yes | Black | 0000000 | 00000 |
4 | 5,800 | 1/2" | 1" | 3 5/16" | 1 3/16" | Offset | Yes | Orange | 0000000 | 00000 |
5 | 5,800 | 1/2" | 1" | 3 5/16" | 7/8" | Offset | Yes | Orange | 0000000 | 00000 |
Twist-Locking Carabiners with Swivel—Not for Lifting
![](/prerenderstable/mvPRE/contents/gfx/imagecache/397/3978n11_9e7ebd10-5ecb-4989-98a6-e7b1e1673b66@halfx_1683810862.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/397/3978n12_042da611-cd02-4d27-9ed6-029ee910197e@halfx_1683810902.png?ver=imagenotfound)
Prevent twisting in your rope or line with these swiveling carabiners. To open, pull the latch down, twist 90° and push in. These carabiners have a symbol that is exposed when the carabiner is fully locked and covered when it is unlocked. Made of anodized aluminum, they resist corrosion and are lightweight.
Carabiners with ball bearings rotate freely under loads.
Carabiners without ball bearings swivel with a bushing to rotate before a load is applied. There is a carabiner on both sides of the swivel, so you can attach multiple items in different orientations.
For technical drawings and 3-D models, click on a part number.
Swivel Type | Capacity, lbs. | Thick. | Opening Wd. | Inside Lg. | Narrow-End Inside Wd. | Overall Lg. | Eye ID | Open Latch Position | Locking Indicator | Color | Each | |
Pull Down/Twist 90°/Push In | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Anodized Aluminum | ||||||||||||
With Ball Bearings | 6,700 | 7/16" | 13/16" | 2 15/16" | 3/16" | 5 3/8" | 1" | Straight | Yes | Black | 0000000 | 0000000 |
Without Ball Bearings | 6,700 | 7/16" | 13/16" | 2 15/16" | 3/16" | 7 3/8" | __ | Straight | Yes | Black | 0000000 | 000000 |
Twist-Locking Carabiners—Not for Lifting
![](/prerenderstable/mvPRE/contents/gfx/imagecache/329/3293t26-@halfx_1683927221.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/329/3293t25-@halfx_1683927222.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/337/3370t23-@halfx_1683927268.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/329/3293t32-@halfx_637078909612005360.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/321/3216t11-@halfx_637079318563845664.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/329/3293t61@halfx_637634882588863330.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/329/3293t18-@halfx_1683927310.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/329/3293t105p2-@halfx_637239380523182778.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/329/3293t163p2-@halfx_637239380525028542.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/329/3293t23-@halfx_1683927247.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/329/3293t35-@halfx_1684181980.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/329/3293t27-@halfx_1683927223.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/i16/i167-3216t11--777de36adc51610632260-p9@halfx_637462074776160388.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/321/3216t11-twist-tilt@halfx_1687961189.png?ver=imagenotfound)
Latch
Position
![](/prerenderstable/mvPRE/contents/gfx/imagecache/321/3216t11-twist-straight@halfx_1687961189.png?ver=imagenotfound)
Latch
Position
Hold rope more securely than nonlocking and slide-release carabiners. While these carabiners are not as secure as screw-locking carabiners, they are easier to open.
Twist 90°/push in carabiners are easy to open with one hand.
Pull down/twist 90°/push in and lift up/twist 90°/push in carabiners are more secure than twist 90°/push in because they require an extra step to open. Some have an unlocked setting, making it easy to add your rope or strap. Lift up the latch then twist it. It will remain unlocked until you push in the latch. Once the latch is pushed in, it springs back and locks into place.
Aluminum carabiners are more lightweight and resist corrosion better than zinc-plated steel. Anodized carabiners offer excellent corrosion resistance.
Style 2 carabiners have a spring-loaded wire to keep rope secured to one end, preventing it from sliding or moving. Lift the wire to release the rope. When you let go, the wire springs back into place.
Styles 3 and 7-13 have either a removable eye pin or eyelet that secures rope to one end of the carabiner to prevent it from sliding or moving.
Carabiners with an offset latch open to the side, giving you more space to attach large items.
Carabiners with a locking indicator have a symbol that is shown when the carabiner is fully locked.
Carabiners that meet ANSI/ASSP Z359.12 have been tested for use in fall protection systems.
Style | Capacity, lbs. | Thick. | Opening Wd. | Inside Lg. | Narrow-End Inside Wd. | Open Latch Position | Locking Indicator | Color | Specifications Met | Features | Each | |
Twist 90°/Push In | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Anodized Aluminum | ||||||||||||
1 | 6,500 | 5/16" | 1" | 3 1/2" | 1 1/4" | Offset | Yes | Red | __ | __ | 0000000 | 000000 |
Pull Down/Twist 90°/Push In | ||||||||||||
Anodized Aluminum | ||||||||||||
2 | 5,300 | 1/2" | 15/16" | 3 1/2" | 1 3/16" | Offset | Yes | Purple | CE Marked | __ | 0000000 | 00000 |
2 | 5,800 | 1/2" | 1" | 3 5/16" | 1" | Straight | Yes | Orange | CE Marked | __ | 0000000 | 00000 |
Lift Up/Twist 90°/Push In | ||||||||||||
Aluminum | ||||||||||||
6 | 2,200 | 1/2" | 1 1/16" | 3 1/2" | 1 1/16" | Straight | No | __ | __ | __ | 0000000 | 00000 |
10 | 1,600 | 7/16" | 13/16" | 4" | 11/16" | Straight | No | __ | __ | __ | 0000000 | 00000 |
Anodized Aluminum | ||||||||||||
5 | 5,800 | 1/2" | 1" | 3 5/16" | 1" | Offset | Yes | Orange | CE Marked | Unlocked Setting | 0000000 | 00000 |
5 | 6,500 | 1/2" | 1" | 3 1/2" | 1 1/4" | Offset | Yes | Red | CE Marked | Unlocked Setting | 0000000 | 00000 |
11 | 6,700 | 11/16" | 2" | 7 3/4" | 1" | Straight | No | Black | __ | __ | 0000000 | 00000 |
12 | 5,000 | 1/2" | 7/8" | 3 3/4" | 1" | Straight | No | __ | ANSI/ASSP Z359.12 | __ | 0000000 | 00000 |
12 | 5,000 | 11/16" | 2" | 8" | 7/8" | Straight | No | __ | ANSI/ASSP Z359.12 | __ | 0000000 | 00000 |
13 | 5,700 | 1/2" | 7/8" | 3 3/4" | 1 3/8" | Straight | No | Black | CE Marked | __ | 00000000 | 00000 |
13 | 5,700 | 1/2" | 7/8" | 3 3/4" | 1 3/8" | Straight | No | Gold | CE Marked | __ | 00000000 | 00000 |
14 | 5,700 | 1/2" | 7/8" | 3 3/4" | 1 3/8" | Straight | No | Black | CE Marked | __ | 00000000 | 00000 |
14 | 5,700 | 1/2" | 7/8" | 3 3/4" | 1 3/8" | Straight | No | Gold | CE Marked | __ | 00000000 | 00000 |
15 | 5,300 | 7/16" | 15/16" | 3 1/2" | 1 3/8" | Offset | Yes | Purple | CE Marked | Unlocked Setting | 0000000 | 00000 |
16 | 6,100 | 1/2" | 7/8" | 3 1/8" | 1" | Straight | No | Gold | CE Marked | __ | 0000000 | 00000 |
17 | 5,000 | 1/2" | 13/16" | 3 1/2" | 7/8" | Straight | No | __ | ANSI/ASSP Z359.12 | __ | 0000000 | 00000 |
S-Hooks with Latches on Both Ends—Not for Lifting
![](/prerenderstable/mvPRE/contents/gfx/imagecache/604/6043t121572015156-p9@halfx_637075941626551646.png?ver=imagenotfound)
The spring-loaded latches on these hooks snap back into place, securing your load.
Aluminum hooks have colorful finishes to easily identify different loads and won’t rust in damp or humid environments.
For technical drawings and 3-D models, click on a part number.
Manual Presses for Fabric Snaps and Grommets
Squeeze the adjustable pliers-grip handle to install standard and dual-sided fabric snaps and fabric grommets. Standard snap halves can be installed with the included 4-piece die set. Dual-sided snap halves require a die (sold separately) for installation. Grommets require a die set (sold separately) for installation.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/957/95720a690p1-b02-digital-master1567695869-p9@halfx_637032746932452061.png?ver=imagenotfound)
Throat | ||||||
---|---|---|---|---|---|---|
For Snap Dia. | Dp. | Wd. | Max. Opening | Material | Each | |
5/8" | 3 1/4" | 1 3/4" | 7/8" | Aluminum | 000000000 | 0000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/957/95720a350p1-b02-digital@halfx_636922173306376980.png?ver=imagenotfound)
For Snap Dia. | Each | |
5/8" | 000000000 | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/957/9572a730-@halfx_637032757992947316.png?ver=imagenotfound)
For Grommet Trade Size | Hole Size | For Grommet Washer Type | Each | |
00 | 3/16" | Extended Neck, Standard | 000000000 | 000000 |
0 | 1/4" | Extended Neck, Standard | 000000000 | 00000 |
0 | 9/32" | Extended-Neck Tooth | 000000000 | 00000 |
1 | 9/32" | Extended Neck, Standard | 000000000 | 00000 |
1 | 13/32" | Extended-Neck Tooth | 000000000 | 00000 |
2 | 3/8" | Extended Neck, Standard | 000000000 | 00000 |
3 | 7/16" | Extended Neck, Standard | 000000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/957/95720a130-@halfx_637644411303296615.png?ver=imagenotfound)
For Snap Dia. | Material | Each | |
5/8" | Rubber | 000000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/957/95720a692p1-b02-digital@halfx_636922174702665327.png?ver=imagenotfound)
For Snap Dia. | Each | |
5/8" | 000000000 | 0000000 |