These rails have continuous T-slots for attaching fittings. Use this versatile framing to configure machine guards, enclosures, carts, and workstations.

Connect T‐slotted rails and reinforce joints for structural stability.

Attach sensors, tubes, and other components to T-slotted framing rails and structures.

Screw and nut sets or nuts secure brackets and other accessories to rails.

Mount these bull's eye levels to workstation and table frames made of T-slotted framing for easy leveling in all directions on the horizontal plane.

Pivots provide smooth motion at the junction between two T-slotted rails.

Add electrical outlets to workstations with these outlet strips that mount on T-slotted rails.

Add rollers to T-slotted framing to create flow rails, ball transfer tables, and other manual conveyors.

Make your T-slotted framing workstation more ergonomic. These positioning arms let you move tools and other items within reach, reducing fatigue and streamlining repetitive processes.

Control static and ground T-slotted framing structures with these bonding and grounding components.

Stay organized with hooks, bin boxes, shelves, and tool holders that work with T-slotted framing.

Bumpers and surface guards cushion doors and other moving parts to prevent damage and reduce noise.

Use hinges to add doors, lids, and machine guards to T-slotted framing.

Half the weight of steel, this aluminum framing resists corrosion in wet environments.

Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.

Up to two times the height of regular strut channel, this high-profile channel is stronger than regular strut channel.

Run wires through the hollow stud of these nuts or use them as vents.

A spring plus serrated grooves that grip the lip of the channel provide a more secure hold than standard strut channel nuts.

Create a four-sided raceway for cable, or give a more finished look to strut channel structures.

Push these brackets into strut channel and tighten the included cam screws for a partially concealed connection.

Pull the edge of the lock to open your door—the low-profile grip fits in tight spaces. These locks are a convenient alternative to cam and draw locks since they don’t require you to turn a cam or pull a latch.

An edge-pull handle fits where traditional handles don’t and makes these latches easy to open.

Install strong, permanent threads in sheet metal to create a 90° joint.

Snap these switches onto your T-slotted framing rails—no need to drill or disassemble your existing structure.

With a slim base and a short barrel, these corrosion-resistant weld nuts fit in tight spaces and in low-clearance areas.

Projections on the base concentrate the weld and create space for heat to dissipate, protecting the threads on these weld nuts from deforming. Made of 18-8 stainless steel, they withstand mild chemicals and can be used in wet and outdoor environments.

An offset barrel allows you to position threads near edges and corners.

To protect their threads from deforming, these stainless steel nuts have a projection that concentrates your weld and creates room for heat to dissipate. An offset barrel lets you position threads near the edges and corners of stainless steel sheets.