Selecting Clamps Using Pipe, Conduit, or Tubing Trade Size
More
About Turnbuckles and End Fittings
More
Threaded Rod Mounts
Fasten these brackets to ceilings, walls, beams, and joists to hang threaded rod.
Style E and style F mounts install flush against the wall. To use, insert threaded rod into the mounting hole and secure with a nut (not included).
Zinc-plated iron mounts have good corrosion resistance. 304 stainless steel mounts have excellent corrosion resistance.
Note: Capacity is for the mount only. Mounting surface and fastening hardware will affect the ultimate capacity.
For technical drawings and 3-D models, click on a part number.
Mounting Hole | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Material | For Thread Size  | Cap., lbs. | Lg. | Wd. | Ht. | Thick. | Rod Distance from Mounting Surface | No. of | Dia. | Mounting Fasteners Included | Threaded Rod Included | Pkg. Qty. | Pkg. | |
Wall Mount | |||||||||||||||
| E | Steel | 3/8"-16, 3/8"-24 | 650 | 2" | 2" | 2" | 1/8" | 1 3/16" | 1 | 7/16" | No | No | 1 | 000000 | 00000 |
| E | Zinc-Plated Steel | 3/8"-16, 3/8"-24 | 650 | 2" | 2" | 2" | 1/8" | 1 3/16" | 1 | 7/16" | No | No | 1 | 0000000 | 0000 |
| E | 304 Stainless Steel | 3/8"-16, 3/8"-24 | 650 | 2" | 2" | 2" | 1/4" | 1 1/8" | 1 | 7/16" | No | No | 1 | 000000 | 00000 |
Threaded-Rod-Mount Multiline Hangers
Route multiple lines of pipe, tubing, and conduit with a single hanger. A wide opening and locking tab allow access for installation, adjustment, and removal. Hangers are zinc-plated steel for good corrosion resistance. To install, pinch the mounting brackets together, fit onto threaded rod, and release.
ID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric, mm | For Pipe Size | For Thread Size | Color | Cap., lbs. | Lg. | Wd. | Ht. | O'all Ht. | Thick. | Each | |
Zinc-Plated Steel | ||||||||||||
| 1 1/4" | 32 | __ | 1/4"-20, 1/4"-28, 3/8"-16, 3/8"-24, 5/16"-18, 5/16"-24 | Black | 20 | 1 45/64" | 1 13/32" | 3 1/8" | 3 13/16" | 3/64" | 0000000 | 00000 |
| 1 3/8" | 35 | 1 | 1/4"-20, 1/4"-28, 3/8"-16, 3/8"-24, 5/16"-18, 5/16"-24 | Black | 20 | 1 13/16" | 1 13/32" | 3 1/4" | 3 11/16" | 3/64" | 0000000 | 0000 |
| 2 3/8" | 60 | 2 | 1/4"-20, 1/4"-28, 3/8"-16, 3/8"-24, 5/16"-18, 5/16"-24 | Black | 20 | 2 13/16" | 1 13/32" | 4 3/16" | 5" | 3/64" | 0000000 | 0000 |
| 3 3/8" | 86 | __ | 1/4"-20, 1/4"-28, 3/8"-16, 3/8"-24, 5/16"-18, 5/16"-24 | Black | 20 | 4 1/64" | 1 13/32" | 6 1/4" | 7" | 3/64" | 0000000 | 00000 |
Stud-End Plug-Lock Wire Rope End Fittings—For Lifting
Fray the end of the wire rope with a marlin spike and screw the socket over the plug to install. An inspection hole confirms proper installation—If wire strands are visible, the fitting has been properly secured.
Use an assembly kit (not included) to support the wire rope while you drive the plug into the wire rope end.
Zinc-plated steel fittings have mild corrosion resistance.
316 stainless steel fittings are the most corrosion resistant fittings we offer. They have excellent resistance to salt water and chemicals.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Never exceed load capacity. Do not use with coated rope unless the coating is removed.
For technical drawings and 3-D models, click on a part number.
For Wire Rope | Thread | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Construction | O'all Lg. | Size | Lg. | Sleeve Dia. | Cap., lbs. | Specifications Met | Each | |
Steel | |||||||||
| 3/16" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 3/16" | 3/8"-24 | 2 3/16" | 3/4" | 700 | ASME B30.26, ASME B30.9 | 00000000 | 000000 |
Zinc-Plated Steel | |||||||||
| 3/16" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 3/16" | 3/8"-24 | 2 3/16" | 3/4" | 700 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
316 Stainless Steel | |||||||||
| 3/16" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 3/16" | 3/8"-24 | 2 3/16" | 3/4" | 700 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
Stud-End Roller Swage Wire Rope End Fittings—Not for Lifting
Also known as socket-end swage fittings, install these end fittings with a roller swage press for a strong, permanent hold. They have a thicker shank wall than compression-grip end fittings. Made of 18-8 stainless steel, they offer excellent corrosion resistance to chemicals.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For technical drawings and 3-D models, click on a part number.
Fittings | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Wire Rope | Thread | Dies | ||||||||||
| Dia. | Construction | Overall Lg. | Size | Lg. | Shank Dia. | Capacity, lbs. | Specifications Met | Each | Pkg. Qty. | Pkg. | ||
18-8 Stainless Steel | ||||||||||||
| 1/4" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC | 4 15/16" | 3/8"-24 | 1 3/4" | 1/2" | 1,400 | MS21259 | 0000000 | 000000 | 2 | 0000000 | 000000000 |
Stud-End Sleeve-Grip Wire Rope End Fittings—Not for Lifting
To install, unscrew the fitting, slide over the wire rope, then tighten the pieces together with a wrench. Use for light-duty securing, tethering, and suspending. Made of 316 stainless steel, these are the most corrosion resistant fittings we offer.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For technical drawings and 3-D models, click on a part number.
For Wire Rope | Thread | ||||||
|---|---|---|---|---|---|---|---|
| Dia. | Construction | Overall Lg. | Size | Lg. | Sleeve Dia. | Each | |
316 Stainless Steel | |||||||
| 1/4" | 1 × 19 Strand Core 7 × 7 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 5 1/32" | 3/8"-24 | 2 15/32" | 27/32" | 0000000 | 000000 |
Corrosion-Resistant Extension Spring Stud Anchors
These stainless steel anchor studs offer excellent corrosion resistance. Attach an extension spring to a stud and then thread the stud into your part for a secure connection.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||
|---|---|---|---|---|---|---|---|
| Size | Min. Lg. | Lg. | Dia. | Hole Dia. | Material | Each | |
| 3/8"-24 | 1 1/8" | 1 5/8" | 3/8" | 0.22" | 18-8 Stainless Steel | 000000000 | 000000 |
Extension Spring Stud Anchors
A black-oxide finish provides these steel anchors with mild corrosion resistance. Attach an extension spring to a stud and then thread the stud into your part for a secure connection.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||
|---|---|---|---|---|---|---|---|
| Size | Min. Lg. | Lg. | Dia. | Hole Dia. | Material | Each | |
| 3/8"-24 | 1 1/8" | 1 5/8" | 3/8" | 0.22" | Black-Oxide Steel | 0000000 | 00000 |
Corrosion-Resistant Swiveling Extension Spring Stud Anchors
These stainless steel anchor studs offer excellent corrosion resistance. The head swivels 360° so the spring stays straight and properly coiled. Attach an extension spring to a stud and then thread the stud into your part for a secure connection. To make tightening easier, anchors have a hex socket on the bottom and wrench flats at the top of the threads.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Min. Lg. | Lg. | Dia. | Hole Dia. | Hex Size | Material | Each | |
| 3/8"-24 | 1 1/8" | 1 5/8" | 3/8" | 0.22" | 1/8" | 18-8 Stainless Steel | 000000000 | 000000 |
Swiveling Extension Spring Stud Anchors
A black-oxide finish provides these steel anchors with mild corrosion resistance. The head swivels 360° so the spring stays straight and properly coiled. Attach an extension spring to a stud and then thread the stud into your part for a secure connection. To make tightening easier, anchors have a hex socket on the bottom and wrench flats at the top of the threads.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Min. Lg. | Lg. | Dia. | Hole Dia. | Hex Size | Material | Each | |
| 3/8"-24 | 1 1/8" | 1 5/8" | 3/8" | 0.22" | 1/8" | Black-Oxide Steel | 000000000 | 000000 |
Closed-Body Clevis-to-Wire Rope Turnbuckles—For Lifting
Use these turnbuckles in lifting applications with wire rope. Their closed body not only protects threads from damage and debris, but also keeps these turnbuckles slim enough to fit in tight spaces.
To install, fray the end of the wire rope with a marlin spike and screw the socket over the plug. You'll know the wire rope is secure if you see wire strands through the inspection hole on the turnbuckle body. Use an assembly kit (not included) to support the wire rope while you drive the plug into the wire rope end.
Zinc-plated steel is mildly corrosion resistant.
316 stainless steel is the most corrosion resistant and has excellent resistance to chemicals and salt water.
Warning: Turnbuckles must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Note: Capacities listed are for vertical lifting only.
For technical drawings and 3-D models, click on a part number.
Clevis Pin | For Wire Rope | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Dia. | Closure Type | Clevis Inside Wd. | Thread Size | Dia. | Construction | Wire Rope Fitting Type | Specifications Met | Each | |
Steel Body with Steel Fittings | |||||||||||||
| 740 | 9 1/2" | 3 1/8" | 12 5/8" | 5/16" | Cotter Pin | 5/16" | 3/8"-24 | 3/16" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Plug Lock | ASME B30.26 | 0000000 | 0000000 |
Zinc-Plated Steel Body with Steel Fittings | |||||||||||||
| 740 | 9 1/2" | 3 1/8" | 12 5/8" | 5/16" | Cotter Pin | 5/16" | 3/8"-24 | 3/16" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Plug Lock | ASME B30.26 | 0000000 | 000000 |
316 Stainless Steel Body with Steel Fittings | |||||||||||||
| 740 | 9 1/2" | 3 1/8" | 12 5/8" | 5/16" | Cotter Pin | 5/16" | 3/8"-24 | 3/16" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Plug Lock | ASME B30.26 | 0000000 | 000000 |
Closed-Body Eye-to-Eye Turnbuckles—Not for Lifting
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces.
Galvanized steel and zinc-plated steel are mildly corrosion resistant.
316 stainless steel has good corrosion resistance.
Forged bodies and components are stronger than cast and wire drawn bodies and components.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Eye Shape | Eye ID | Thread Size | Features | Each | |
Forged Steel Body with Galvanized Steel Fittings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 2,800 | 10" | 4 1/4" | 14 1/4" | Round | 5/8" | 3/8"-24 | Jam Nuts | 0000000 | 000000 |
316 Stainless Steel Body with 316 Stainless Steel Fittings | |||||||||
| 2,800 | 10" | 4 1/4" | 14 1/4" | Round | 5/8" | 3/8"-24 | Jam Nuts | 0000000 | 00000 |
Closed-Body Hook-to-Eye Turnbuckles—Not for Lifting
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces.
316 stainless steel has good corrosion resistance.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Hook Opening Wd. | Eye Shape | Eye ID | Thread Size | Features | Each | |
316 Stainless Steel Body with 316 Stainless Steel Fittings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 400 | 10" | 4 1/4" | 14 1/4" | 5/8" | Round | 5/8" | 3/8"-24 | Jam Nuts | 0000000 | 000000 |
Closed-Body Clevis-to-Eye Turnbuckles—Not for Lifting
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces. Made of 316 stainless steel, these turnbuckles have good corrosion resistance.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.
Clevis Pin | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Dia. | Closure Type | Clevis Inside Wd. | Eye Shape | Eye ID | Thread Size | Features | Each | |
316 Stainless Steel Body with 316 Stainless Steel Fittings | ||||||||||||
| 2,800 | 9 1/2" | 4 1/4" | 13 3/4" | 3/8" | Cotter Ring | 3/8" | Round | 5/8" | 3/8"-24 | Jam Nuts | 0000000 | 000000 |
Closed-Body Clevis-to-Clevis Turnbuckles—Not for Lifting
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces. Made of 316 stainless steel, these turnbuckles have excellent corrosion resistance.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.
Clevis Pin | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Dia. | Closure Type | Clevis Inside Wd. | Thread Size | Features | Each | |
316 Stainless Steel Body with 316 Stainless Steel Fittings | ||||||||||
| 2,800 | 9 1/2" | 4 1/4" | 13 3/4" | 3/8" | Cotter Ring | 3/8" | 3/8"-24 | Jam Nuts | 0000000 | 000000 |
Closed-Body Mounting-Plate-to-Wire Rope Turnbuckles—Not for Lifting
Create a wire rope railing, perimeter, or barrier. These turnbuckles have a closed body that protects them from damage and debris and keeps them slim enough to fit in tight spaces. All are 316 stainless steel, so they have excellent resistance to chemicals and salt water.
Turnbuckles with a sleeve grip fitting have a mounting plate with swivel ends. To install, mount the turnbuckle to a wall or post. Then unscrew the fitting, slide over the wire rope, and tighten the pieces together with a wrench.
Warning: Turnbuckles must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Note: Capacities listed are for in-line pulling only.
For technical drawings and 3-D models, click on a part number.
Mounting Plate | For Wire Rope | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity | Retracted Lg. | Max. Adjustment | Extended Lg. | Lg. | Wd. | Movement | Dia. | Construction | Wire Rope Fitting Type | No. of Mounting Holes | Mounting Hole Dia. | Mounting Fasteners Included | Thread Size | Each | |
316 Stainless Steel Body with 316 Stainless Steel Fittings | |||||||||||||||
| 70% of the Rope's Capacity | 9" | 3 7/16" | 12 7/16" | 3 1/16" | 7/8" | 360° Swivel | 1/4" | 1 × 19 Strand Core 7 × 7 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Sleeve Grip | 2 | 0.394" | Yes | 3/8"-24 | 0000000 | 000000 |
Closed-Body Hook-to-Hook Turnbuckles—Not for Lifting
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces.
316 stainless steel has good corrosion resistance.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Hook Opening Wd. | Thread Size | Features | Each | |
316 Stainless Steel Body with 316 Stainless Steel Fittings | ||||||||
|---|---|---|---|---|---|---|---|---|
| 400 | 10" | 4 1/4" | 14 1/4" | 5/8" | 3/8"-24 | Jam Nuts | 0000000 | 000000 |
Hook-to-Clevis Turnbuckles—Not for Lifting
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces. Made of 316 stainless steel, these turnbuckles have good corrosion resistance.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.
Clevis Pin | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Hook Opening Wd. | Dia. | Closure Type | Clevis Inside Wd. | Thread Size | Features | Each | |
316 Stainless Steel Body with 316 Stainless Steel Fittings | |||||||||||
| 400 | 10" | 4 1/4" | 14 1/4" | 5/8" | 3/8" | Cotter Ring | 3/8" | 3/8"-24 | Jam Nuts | 0000000 | 000000 |