McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    25 Products

    Angle Iron Beam Clamps for Threaded Rods

    Image of System. Front orientation. Beam Clamps. Angle Iron Beam Clamps for Threaded Rods.
    Image of ProductInUse. Shown With One Pair of Angles. Front orientation. Contains Annotated. Beam Clamps. Angle Iron Beam Clamps for Threaded Rods.
    Image of ProductInUse. Shown with Two Pairs of Angles. Front orientation. Beam Clamps. Angle Iron Beam Clamps for Threaded Rods.

    Shown With One Pair of

    Angles

    Shown with Two Pairs of Angles

    A secure way to hang threaded rods from a pair of angles, such as those used in ceiling joists, without the need to drill or weld. These clamps are commonly used to suspend HVAC, conveyor, and other overhead systems. They may also be used to connect two pairs of angles at 90°. Clamps are zinc-plated steel for good corrosion resistance. Each clamp includes a bracket and square washer. Secure with a hex nut (sold separately).
    Capacity is the maximum load for two clamps holding a pair of angles across parallel joists. The values listed are for the maximum distance between joists, which is 6 ft. For shorter distances, capacities are higher.
    Washer
    For Thread Size
    For Angle
    Thk.
    For Max.
    Beam Span, ft.
    Wt. Cap.,
    lb.
    Mount
    Type
    Inside
    Wd.
    Lg.
    Wd.
    Ht.
    Thk.
    Threaded Rod
    Included
    Material
    No.
    Included
    Each
     
    Zinc-Plated Steel
    5/8"-11, 5/8"-183/16" to 1/4"6500Clamp On1 1/2"2 3/8"2"2"1/4"NoSteel10000000000000
     

    Threaded Rod Mounts

    Image of ProductInUse. Front orientation. Threaded Rod Mounts. Style E.

    Style E

    Fasten these brackets to ceilings, walls, beams, and joists to hang threaded rod.
    Note: Capacity is for the mount only. Mounting surface and fastening hardware will affect the ultimate capacity.
    Style E—Style E and style F mounts install flush against the wall. To use, insert threaded rod into the mounting hole and secure with a nut (not included).
    304 Stainless Steel—304 stainless steel mounts have excellent corrosion resistance.
    Mounting
    Hole
    Style
    Material
    For Thread Size
    Wt. Cap.,
    lb.
    Lg.
    Wd.
    Ht.
    Thk.
    Rod Distance from
    Mounting Surface
    No.
    of
    Dia.
    Mounting Fasteners
    Included
    Threaded Rod
    Included
    Pkg.
    Qty.
    Pkg.
    Wall Mount
    ESteel5/8"-11, 5/8"-18
    		8502 1/2"2"2 1/2"3/8"1 1/2"111/16"NoNo100000000000
    EZinc-Plated Steel5/8"-11, 5/8"-18
    		8502 1/2"2"2 1/2"3/8"1 1/2"111/16"NoNo100000000000
    E304 Stainless Steel5/8"-11, 5/8"-18
    		8502 1/2"2"2 1/2"3/8"1 1/2"111/16"NoNo100000000000
     

    Threaded Rod Hanger Beams

    Image of ProductInUse. Front orientation. Threaded Rod Hanger Beams.
    Image of Product. Front orientation. Contains Annotated. Threaded Rod Hanger Beams.
    Mount these beams across parallel roof joists to hang threaded rod and route pipe, duct, and other overhead systems in areas where there’s no anchoring point. Beams are shaped to fit beneath corrugated roofing. They include a threaded rod anchor for supporting a single threaded rod.
    For Joist-to-Joist
    Lg., ft.
    Cap. with 1 Threaded
    Rod Anchor, lb.
    Cap. with 2 Threaded
    Rod Anchors, lb.
    For Thread Size
    Threaded Rod
    Included
    Color
    Includes
    Each
    Steel
    41,0002,0005/8"-11, 5/8"-18
    		NoBlack1 Threaded Rod Anchor, 2 Joist Brackets00000000000000
    51,0002,0005/8"-11, 5/8"-18
    		NoBlack1 Threaded Rod Anchor, 2 Joist Brackets0000000000000
    61,0002,0005/8"-11, 5/8"-18
    		NoBlack1 Threaded Rod Anchor, 2 Joist Brackets0000000000000
    71,0001,8005/8"-11, 5/8"-18
    		NoBlack1 Threaded Rod Anchor, 2 Joist Brackets0000000000000
    81,0001,5505/8"-11, 5/8"-18
    		NoBlack1 Threaded Rod Anchor, 2 Joist Brackets0000000000000
     
    Anchors
    Add more threaded rod anchors to support additional threaded rod and customize your setup.
    Each
    Threaded Rod Anchors0000000000000

    Stud-End Sleeve-Grip Wire Rope End Fittings—Not for Lifting

    Image of System. Front orientation. Exploded view. Contains Annotated. Wire Rope End Fittings. Stud-End Sleeve-Grip Wire Rope End Fittings—Not for Lifting.
    Image of Product. Front orientation. Contains Annotated. Wire Rope End Fittings. Stud-End Sleeve-Grip Wire Rope End Fittings—Not for Lifting.
    To install, unscrew the fitting, slide over the wire rope, then tighten the pieces together with a wrench. Use for light-duty securing, tethering, and suspending. Made of 316 stainless steel, these are the most corrosion resistant fittings we offer.
    Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
    For
    Wire Rope
    Thread
    Dia.
    Construction
    Overall
    Lg.
    Size
    Lg.
    Sleeve
    Dia.
    Wt. Cap.
    Each
    316 Stainless Steel
    3/8"1 × 19 Strand Core
    7 × 7 IWRC
    7 × 7 Strand Core
    7 × 19 IWRC
    7 × 19 Strand Core
    		7 13/32"5/8"-18
    		3 15/16"1 3/16"Not Rated00000000000000
     

    Closed Turnbuckle Bodies—Not for Lifting

    Image of Product. Side1 orientation. Turnbuckles. Closed Turnbuckle Bodies—Not for Lifting.
    The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces. Made of 316 stainless steel, they have good corrosion resistance.
    316 Stainless Steel
    Wt. Cap.,
    lb.
    Max.
    Adjustment
    Thread
    Size
    Overall
    Lg.
    Each
    5,9005"5/8"-18
    		8 5/8"0000000000000
     

    Closed-Body Clevis-to-Clevis Turnbuckles—Not for Lifting

    The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces. Made of 316 stainless steel, these turnbuckles have excellent corrosion resistance.
    Note: Capacities listed are for straight or in-line pull only.
    316 Stainless Steel Body with 316 Stainless Steel Fittings
    Image of Product. Front orientation. Turnbuckles. Closed-Body Clevis-to-Clevis Turnbuckles—Not for Lifting.
    Image of Attribute. Front orientation. Contains Annotated. Closed-Body Clevis-to-Clevis Turnbuckles—Not for Lifting.
    Clevis
    Pin
    Wt. Cap.,
    lb.
    Retracted
    Lg.
    Max.
    Adjustment
    Extended
    Lg.
    Dia.
    Closure
    Method
    Clevis
    Inside Wd.
    Thread
    Size
    Features
    Each
    5,90015 1/4"5 1/4"20 1/2"5/8"Cotter Ring5/8"5/8"-18
    		Jam Nuts, Bronze Pivot Insert00000000000000
     

    Closed-Body Eye-to-Eye Turnbuckles—Not for Lifting

    The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces.
    Note: Capacities listed are for straight or in-line pull only.
    Forged Steel Body with Forged Galvanized Steel Fittings
    Image of Product. Front orientation. Turnbuckles. Closed-Body Eye-to-Eye Turnbuckles—Not for Lifting.
    Forged bodies and components are stronger than cast and wire drawn bodies and components.
    Galvanized steel is mildly corrosion resistant.
    Wt. Cap.,
    lb.
    Retracted
    Lg.
    Max.
    Adjustment
    Extended
    Lg.
    Eye
    Shape
    Eye
    ID
    Thread
    Size
    Features
    Each
    5,90014"5"19"Round7/8"5/8"-18
    		Jam Nuts0000000000000
     
    316 Stainless Steel Body with 316 Stainless Steel Fittings
    Image of Product. Front orientation. Turnbuckles. Closed-Body Eye-to-Eye Turnbuckles—Not for Lifting.
    316 stainless steel has good corrosion resistance.
    Wt. Cap.,
    lb.
    Retracted
    Lg.
    Max.
    Adjustment
    Extended
    Lg.
    Eye
    Shape
    Eye
    ID
    Thread
    Size
    Features
    Each
    5,90015"5 3/4"20 3/4"Round7/8"5/8"-18
    		Jam Nuts00000000000000
     

    Hook-to-Clevis Turnbuckles—Not for Lifting

    The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces. Made of 316 stainless steel, these turnbuckles have good corrosion resistance.
    Note: Capacities listed are for straight or in-line pull only.
    316 Stainless Steel Body with 316 Stainless Steel Fittings
    Image of Product. Front orientation. Turnbuckles. Hook-to-Clevis Turnbuckles—Not for Lifting.
    Image of Attribute. Front orientation. Contains Annotated. Hook-to-Clevis Turnbuckles—Not for Lifting.
    Image of Attribute. Front orientation. Contains Annotated.
    Clevis
    Pin
    Wt. Cap.,
    lb.
    Retracted
    Lg.
    Max.
    Adjustment
    Extended
    Lg.
    Hook Opening
    Wd.
    Dia.
    Closure
    Method
    Clevis
    Inside Wd.
    Thread
    Size
    Features
    Each
    1,20015"5 3/4"20 3/4"7/8"5/8"Cotter Ring5/8"5/8"-18
    		Jam Nuts, Bronze Pivot Insert00000000000000
     

    Clevis End Fittings for Turnbuckles—Not for Lifting

    Image of Attribute. Side1 orientation. ZoomedIn view. Contains Annotated. Turnbuckles. Clevis End Fittings for Turnbuckles—Not for Lifting.
    Forged 18-8 Stainless Steel
    Image of Product. Front orientation. Turnbuckles. Clevis End Fittings for Turnbuckles—Not for Lifting, Cotter Ring Closure.

    Cotter Ring

    Closure

    Forged fittings are stronger than cast and wire drawn fittings.
    18-8 stainless steel fittings have good corrosion resistance.
    Clevis
    Pin
    Right-Hand
    Thread Direction
    Left-Hand
    Thread Direction
    Wt. Cap.,
    lb.
    Dia.
    Closure
    Method
    Clevis
    Inside Wd.
    Thread
    Size
    Thread
    Lg.
    Overall
    Lg.
    Each
    Each
    5,9005/8"Cotter Ring5/8"5/8"-18
    		4 5/16"7 5/8"000000000000000000000000000000
     

    Closed-Body Clevis-to-Eye Turnbuckles—Not for Lifting

    The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces. Made of 316 stainless steel, these turnbuckles have good corrosion resistance.
    Note: Capacities listed are for straight or in-line pull only.
    316 Stainless Steel Body with 316 Stainless Steel Fittings
    Image of Product. Front orientation. Turnbuckles. Closed-Body Clevis-to-Eye Turnbuckles—Not for Lifting.
    Image of Attribute. Front orientation. Contains Annotated. Closed-Body Clevis-to-Eye Turnbuckles—Not for Lifting.
    Clevis
    Pin
    Wt. Cap.,
    lb.
    Retracted
    Lg.
    Max.
    Adjustment
    Extended
    Lg.
    Dia.
    Closure
    Method
    Clevis
    Inside Wd.
    Eye
    Shape
    Eye
    ID
    Thread
    Size
    Features
    Each
    5,90015"5"20"5/8"Cotter Ring5/8"Round7/8"5/8"-18
    		Jam Nuts, Bronze Pivot Insert00000000000000
     

    Closed-Body Hook-to-Eye Turnbuckles—Not for Lifting

    The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces.
    Note: Capacities listed are for straight or in-line pull only.
    316 Stainless Steel Body with 316 Stainless Steel Fittings
    Image of Product. Front orientation. Turnbuckles. Closed-Body Hook-to-Eye Turnbuckles—Not for Lifting.
    Image of Attribute. Front orientation. Contains Annotated.
    316 stainless steel has good corrosion resistance.
    Wt. Cap.,
    lb.
    Retracted
    Lg.
    Max.
    Adjustment
    Extended
    Lg.
    Hook Opening
    Wd.
    Eye
    Shape
    Eye
    ID
    Thread
    Size
    Features
    Each
    1,20015"6"21"7/8"Round7/8"5/8"-18
    		Jam Nuts00000000000000
     

    Closed-Body Hook-to-Hook Turnbuckles—Not for Lifting

    The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces.
    Note: Capacities listed are for straight or in-line pull only.
    316 Stainless Steel Body with 316 Stainless Steel Fittings
    Image of Product. Front orientation. Turnbuckles. Closed-Body Hook-to-Hook Turnbuckles—Not for Lifting.
    Image of Attribute. Front orientation. Contains Annotated.
    316 stainless steel has good corrosion resistance.
    Wt. Cap.,
    lb.
    Retracted
    Lg.
    Max.
    Adjustment
    Extended
    Lg.
    Hook Opening
    Wd.
    Thread
    Size
    Features
    Each
    1,20014 5/8"6 1/4"20 7/8"7/8"5/8"-18
    		Jam Nuts00000000000000
     

    Eye End Fittings for Turnbuckles—Not for Lifting

    Cold Drawn 18-8 Stainless Steel
    Image of Specification. Front orientation. Contains Annotated. Eye End Fittings for Turnbuckles—Not for Lifting, Round Eye.

    Round Eye

    18-8 stainless steel fittings have good corrosion resistance.
    Right-Hand
    Thread Direction
    Left-Hand
    Thread Direction
    Wt. Cap.,
    lb.
    Eye
    Shape
    Eye
    ID
    Thread
    Size
    Thread
    Lg.
    Overall
    Lg.
    Each
    Each
    5,900Round7/8"5/8"-18
    		4 3/16"6 1/2"0000000000000000000000000000
     

    Hook End Fittings for Turnbuckles—Not for Lifting

    Cold Drawn 18-8 Stainless Steel
    Image of Attribute. Front orientation. Contains Annotated.
    18-8 stainless steel fittings have good corrosion resistance.
    Right-Hand
    Thread Direction
    Left-Hand
    Thread Direction
    Wt. Cap.,
    lb.
    Hook Opening
    Wd.
    Thread
    Size
    Thread
    Lg.
    Overall
    Lg.
    Each
    Each
    1,2007/8"5/8"-18
    		4 3/16"6 3/4"0000000000000000000000000000
     
    back to top