McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    5 Products

    Corrosion-Resistant Swiveling Extension Spring Stud Anchors

    Image of Product. Front orientation. Contains Annotated. Hanger Bolts. Corrosion-Resistant Swiveling Extension Spring Stud Anchors.
    These stainless steel stud anchors offer excellent corrosion resistance. The head swivels 360° so the spring stays straight and properly coiled. Attach an extension spring to an anchor and then thread the anchor into your part for a secure connection. To make tightening easier, anchors have a hex socket on the bottom and wrench flats at the top of the threads.
    Thread
    Size
    Min.
    Lg.
    Spacing
    Lg.
    Dia.
    Hole
    Dia.
    Hex
    Size
    Each
    18-8 Stainless Steel
    6-40
    		5/8"Fine
    		5/8"1/8"0.08"0.035"96376A500000000
     

    Extension Spring Stud Anchors

    Image of Product. Front orientation. Contains Annotated. Hanger Bolts. Extension Spring Stud Anchors.
    Black-oxide steel anchors create a rigid, adjustable mounting point for extension springs that won't shift under load. Thread them into your part for a secure connection that outperforms hooks and loops. Steel construction handles repeated spring tension without deforming, and the black-oxide finish provides mild corrosion resistance.
    Thread
    Size
    Min.
    Lg.
    Spacing
    Lg.
    Dia.
    Hole
    Dia.
    Each
    Black-Oxide Steel
    6-40
    		3/8"Fine
    		5/8"0.138"0.08"9634K3100000
     

    Corrosion-Resistant Extension Spring Stud Anchors

    Image of Product. Front orientation. Contains Annotated. Hanger Bolts. Corrosion-Resistant Extension Spring Stud Anchors.
    These stainless steel stud anchors offer excellent corrosion resistance. Attach an extension spring to an anchor and then thread the anchor into your part for a secure connection.
    Thread
    Size
    Min.
    Lg.
    Spacing
    Lg.
    Dia.
    Hole
    Dia.
    Each
    18-8 Stainless Steel
    6-40
    		5/8"Fine
    		5/8"0.138"0.08"95907A10000000
     

    Stud-End Roller Swage Wire Rope End Fittings—Not for Lifting

    Image of Product. Front orientation. Contains Annotated. Wire Rope End Fittings. Stud-End Roller Swage Wire Rope End Fittings—Not for Lifting.
    Also known as socket-end swage fittings, install these end fittings with a roller swage press for a strong, per manent hold. They have a thicker shank wall than compression-grip end fittings. Made of 18-8 stainless steel, they offer excellent corrosion resistance to chemicals.
    Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
    Fittings
    Dies
    For
    Wire Rope
    Thread
    Dia.
    Construction
    Overall
    Lg.
    Size
    Lg.
    Shank
    Dia.
    Wt. Cap.,
    lb.
    Mil.
    Spec.
    Each
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    1/16"1 × 7 Strand Core
    1 × 19 Strand Core
    7 × 7 Strand Core
    7 × 19 IWRC
    7 × 19 Strand Core
    		2 1/2"6-40
    		1 1/16"3/16"90MS212593870T210000023429T110000000
     
    back to top