About Turnbuckles and End Fittings
More
About Hex Head Screws and Bolts
More
About Threaded Studs and Rods
More
Shallow-Hole Female-Threaded Anchors for Block and Brick
Also known as caulk-in anchors, these stay secure when there's not much material to hold. When installed, the cone expands the sleeve to hold it firmly inside the hole. To install, insert the anchor cone end first and use an installation tool to drive the sleeve over the cone. Then, insert a screw or threaded rod and tighten. Pull-out strength and shear strength values are 25% of the ultimate values.
For technical drawings and 3-D models, click on a part number.

Strength, lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Lg. | Min. Installation Dp. | Drill Bit Size | Dia. | Sleeve Material | Pull-Out | Shear | Tested In | For Use In | Pkg. Qty. | Pkg. | |
Zinc Alloy | ||||||||||||
8-32 | 9/16" | 1/2" | 5/16" | 5/16" | Lead | 85 | 85 | 4,000 psi Concrete | Block, Brick, Concrete | 25 | 000000000 | 000000 |

Drive these tools with a hammer to expand anchors.
For Thread Size | Lg. | Each | |
Zinc-Plated Steel | |||
---|---|---|---|
8-32 | 2 15/16" | 000000000 | 00000 |
Installation Tools for Shallow-Hole Female-Threaded Anchors

Drive these tools with a hammer to expand anchors.
For technical drawings and 3-D models, click on a part number.
For Thread Size | Lg. | Each | |
Zinc-Plated Steel | |||
---|---|---|---|
8-32 | 2 15/16" | 000000000 | 00000 |
Machine Screw-Style Hangers

Also known as spade bolts, you can use these versatile hangers in a threaded hole (as you would a screw), or secure them with a nut (as you would a bolt). Zinc plating provides corrosion resistance in wet environments. Material meets ASTM A307 or F2282 specifications for quality.
For technical drawings and 3-D models, click on a part number.
Steel Wood Screw Threaded Studs

These studs are also known as hanger bolts—use them to hang, mount, and fasten parts to wood structures. Install with a stud driver or create wrench flats by threading two nuts onto the stud and jamming them together.
Black-oxide steel studs are mildly corrosion resistant in dry environments.
Zinc-plated steel studs resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
(A) | (B) | ||||||||
---|---|---|---|---|---|---|---|---|---|
Screw Size | Thread Lg. | Thread Size | Thread Lg. | Lg. | Tensile Strength | Hardness | Pkg. Qty. | Pkg. | |
Black-Oxide Steel | |||||||||
No. 8 | 7/8" | 8-32 | 5/8" | 1 1/2" | Not Rated | Not Rated | 50 | 000000000 | 000000 |
No. 8 | 1" | 8-32 | 3/4" | 1 3/4" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
No. 8 | 1" | 8-32 | 1" | 2" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
Zinc-Plated Steel | |||||||||
No. 8 | 7/8" | 8-32 | 5/8" | 1 1/2" | Not Rated | Not Rated | 100 | 000000000 | 0000 |
No. 8 | 1" | 8-32 | 3/4" | 1 3/4" | Not Rated | Not Rated | 100 | 000000000 | 0000 |
No. 8 | 1" | 8-32 | 1" | 2" | Not Rated | Not Rated | 100 | 000000000 | 00000 |
Routing Eyebolts with Nuts—Not for Lifting

Also known as nut eyebolts, these are designed for through-hole applications. Use them for routing wire and for other light duty applications.
Zinc-plated steel eyebolts offer good corrosion resistance.
Black-oxide steel eyebolts are more corrosion resistant than zinc-plated steel.
304 stainless steel eyebolts are more corrosion resistant than black-oxide steel.
316 stainless steel are the most corrosion resistant eyebolts.
For technical drawings and 3-D models, click on a part number.
Thread | Nuts | ||||||||
---|---|---|---|---|---|---|---|---|---|
Size | Lg. | Shank Lg. | Overall Lg. | Eye Dia. | No. Included | Style | Pkg. Qty. | Pkg. | |
Bent-Closed Eye | |||||||||
8-32 | 1" | 1 1/8" | 1 5/8" | 1/4" | 1 | Hex | 10 | 0000000 | 00000 |
Thread | Nuts | ||||||||
---|---|---|---|---|---|---|---|---|---|
Size | Lg. | Shank Lg. | Overall Lg. | Eye Dia. | No. Included | Style | Pkg. Qty. | Pkg. | |
Bent-Closed Eye | |||||||||
8-32 | 1" | 1 1/8" | 1 5/8" | 1/4" | 1 | Hex | 10 | 00000000 | 00000 |
Thread | Nuts | ||||||||
---|---|---|---|---|---|---|---|---|---|
Size | Lg. | Shank Lg. | Overall Lg. | Eye Dia. | No. Included | Style | Pkg. Qty. | Pkg. | |
Bent-Closed Eye | |||||||||
8-32 | 1" | 1 1/8" | 1 5/8" | 1/4" | 1 | Hex | 5 | 0000000 | 00000 |
Thread | Nuts | |||||||
---|---|---|---|---|---|---|---|---|
Size | Lg. | Shank Lg. | Overall Lg. | Eye Dia. | No. Included | Style | Each | |
Bent-Closed Eye | ||||||||
8-32 | 1" | 1 1/8" | 1 3/4" | 1/4" | 1 | Hex | 00000000 | 00000 |
Extension Spring Stud Anchors

A black-oxide finish provides these steel anchors with mild corrosion resistance. Attach an extension spring to a stud and then thread the stud into your part for a secure connection.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||
---|---|---|---|---|---|---|---|
Size | Min. Lg. | Lg. | Dia. | Hole Dia. | Material | Each | |
8-32 | 5/8" | 7/8" | 0.164" | 0.1" | Black-Oxide Steel | 0000000 | 00000 |
Corrosion-Resistant Extension Spring Stud Anchors

These stainless steel anchor studs offer excellent corrosion resistance. Attach an extension spring to a stud and then thread the stud into your part for a secure connection.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||
---|---|---|---|---|---|---|---|
Size | Min. Lg. | Lg. | Dia. | Hole Dia. | Material | Each | |
8-32 | 5/8" | 7/8" | 0.164" | 0.1" | 18-8 Stainless Steel | 000000000 | 00000 |
Corrosion-Resistant Swiveling Extension Spring Stud Anchors

These stainless steel anchor studs offer excellent corrosion resistance. The head swivels 360° so the spring stays straight and properly coiled. Attach an extension spring to a stud and then thread the stud into your part for a secure connection. To make tightening easier, anchors have a hex socket on the bottom and wrench flats at the top of the threads.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||
---|---|---|---|---|---|---|---|---|
Size | Min. Lg. | Lg. | Dia. | Hole Dia. | Hex Size | Material | Each | |
8-32 | 5/8" | 7/8" | 0.164" | 0.1" | 0.05" | 18-8 Stainless Steel | 000000000 | 000000 |
Swiveling Extension Spring Stud Anchors

A black-oxide finish provides these steel anchors with mild corrosion resistance. The head swivels 360° so the spring stays straight and properly coiled. Attach an extension spring to a stud and then thread the stud into your part for a secure connection. To make tightening easier, anchors have a hex socket on the bottom and wrench flats at the top of the threads.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||
---|---|---|---|---|---|---|---|---|
Size | Min. Lg. | Lg. | Dia. | Hole Dia. | Hex Size | Material | Each | |
8-32 | 5/8" | 7/8" | 0.164" | 0.1" | 0.05" | Black-Oxide Steel | 000000000 | 000000 |
Screw-In Hooks


Threads on one end make it easy to screw these hooks directly into a wall.
Hooks with one hex nut secure through a mounting hole from the back.
For technical drawings and 3-D models, click on a part number.
Hook-to-Eye Turnbuckles—Not for Lifting

Galvanized steel and zinc-plated steel are mildly corrosion resistant.
Aluminum is lightweight and has good corrosion resistance.
18-8 stainless steel has good corrosion resistance.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.


Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Hook Opening Wd. | Eye Shape | Eye ID | Thread Size | Each | |
30 | 3 1/2" | 1 1/4" | 4 3/4" | 1/4" | Round | 1/4" | 8-32 | 00000000 | 00000 |


Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Hook Opening Wd. | Eye Shape | Eye ID | Thread Size | Each | |
30 | 3 1/2" | 1 1/4" | 4 3/4" | 1/4" | Round | 1/4" | 8-32 | 00000000 | 00000 |
Eye-to-Eye Turnbuckles—Not for Lifting

Galvanized steel and zinc-plated steel are mildly corrosion resistant.
Aluminum is lightweight and has good corrosion resistance.
18-8 stainless steel has good corrosion resistance.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.

Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Eye Shape | Eye ID | Thread Size | Each | |
30 | 3 1/2" | 1 1/4" | 4 3/4" | Round | 1/4" | 8-32 | 0000000 | 00000 |

Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Eye Shape | Eye ID | Thread Size | Each | |
30 | 3 1/2" | 1 1/4" | 4 3/4" | Round | 1/4" | 8-32 | 00000000 | 00000 |
Closed-Body Eye-to-Eye Turnbuckles—Not for Lifting

The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces.
Galvanized steel and zinc-plated steel are mildly corrosion resistant.
Aluminum is lightweight and has good corrosion resistance.
316 stainless steel has good corrosion resistance.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.
Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Eye Shape | Eye ID | Thread Size | Features | Each | |
Extruded Aluminum Body with Zinc-Plated Steel Fittings | |||||||||
---|---|---|---|---|---|---|---|---|---|
30 | 3 1/2" | 1 1/4" | 4 3/4" | Round | 1/4" | 8-32 | __ | 000000000 | 00000 |
Cast 316 Stainless Steel Body with 316 Stainless Steel Fittings | |||||||||
300 | 5 1/2" | 2 1/4" | 7 3/4" | Round | 1/4" | 8-32 | Jam Nuts | 0000000 | 00000 |
Hook-to-Hook Turnbuckles—Not for Lifting

Zinc-plated steel and galvanized steel are mildly corrosion resistant.
Aluminum is lightweight and has good corrosion resistance.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.

Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Hook Opening Wd. | Thread Size | Each | |
30 | 3 3/8" | 1 1/4" | 4 5/8" | 1/4" | 8-32 | 00000000 | 00000 |

Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Hook Opening Wd. | Thread Size | Each | |
30 | 3 1/2" | 1 1/4" | 4 3/4" | 1/4" | 8-32 | 00000000 | 00000 |