M6 Anchors | McMaster-Carr

Filter by

System of Measurement

Inch

Metric

Screw Size

Anchor Type

Connection Hardware

Usable Length

For Use In

Material

Thread Pitch

Diameter

Threading

Threaded on Both Ends

Length

Thread Length

Performance

Connection Method

Thread Type

Ultimate Shear Strength

Color

For Use On

Mount Type

Finish

Thread Spacing

REACH

RoHS

Compliant with Exemptions

DFARS Specialty Metals

Compliant

Exempt

Not Compliant

Export Control Classification Number (ECCN)

EAR99

Forward

How can we improve?

8 Products

High-Strength Toggle Anchors for Drywall

Our highest-strength drywall anchors are strong enough to secure pegboards, grab bars, and sinks. The toggle creates an extremely tight hold and won’t fall behind the wall when your screw is removed, so you can switch out components without losing strength. However, the anchor itself cannot be removed. Unlike traditional toggle bolt anchors, the toggle is pulled tight to the wall with the cap, which also covers the hole.

To install, push the toggle through a drilled hole and pull the anchor back toward you until the toggle rests flush against the wall. Then, slide the cap along the straps up to the wall. Push straps side-to-side, snapping them off so they're level with the cap. Next, position your component over the hole, insert a machine screw, and tighten. The minimum screw length is the wall and component thicknesses plus _1/2".

						Ultimate Strength, lbf
For Thread Size	Usable Lg., mm	Drill Bit Size, mm	Wing Span, mm	Toggle Material	Material	Pull-Out	Shear	Conditions Tested In	Pkg. Qty.		Pkg.
M6 × 1 mm	10 to 92	13	51	Zinc-Plated Steel	Polystyrene	260	240	1/2" Drywall	5	000000000	00000

Thread-Mount Studs for Wood

Also known as hanger bolts, use these studs to hang, mount, and fasten parts to wood structures. Install them with a stud driver, or create wrench flats by threading two nuts onto the stud and jamming them together.

316 Stainless Steel—Superior to 18-8 stainless steel, these studs won't degrade when exposed to harsh weather, salt water, and most chemicals.

	(A)		(B)
	Screw Size	Thread Lg., mm	Thread Size	Thread Lg., mm	Lg., mm	Tensile Strength	Hardness	Pkg. Qty.		Pkg.
316 Stainless Steel



		M6	37	M6 × 1 mm	30	70	Not Rated	Not Rated	1	000000000	00000

Beam Clamps for Threaded Rods

Style E

Attach these clamps to the flange of a beam, then hang threaded rods from the threaded hole.

Zinc-Plated Iron—Zinc-plated iron clamps have mild corrosion resistance.

Style E—Styles D, E, and H have a threaded hole on the back for supporting a hanger or routing ring.

	For Max. Beam Thk.	Wt. Cap., lb.	Mount Type	Throat Dp.	Lg.	Wd.	Ht.	Threaded Rod Included		Each
Bottom Beam Mount







	Zinc-Plated Iron

	E	Flat, Taper	M6 × 1 mm	1/2"	275	Clamp On	1/2"	1 1/2"	1 1/8"	1 1/2"	No	000000	000000

Hoist Rings—For Lifting

180° Pivot

360° Swivel

Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque wrenches are sold separately.

Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.

Warning: Never use to lift people or items over people.

Black-Oxide Steel—Black-oxide steel hoist rings have mild corrosion resistance.

CE Marked—Hoist rings that are CE marked meet European safety standards.

										Each
Thread Size	Thread Lg., mm	Inside Wd., mm	Overall Ht., mm	Vert. Cap., lb.	Movement	Specs. Met	Certification	Mil. Spec.		1-9	10-Up







			Forged Black-Oxide Steel

			M6 × 1 mm	13	24	82	550	180° Pivot and 360° Swivel	ASME B30.26	CE Marked, Mil. Spec.	MIL-STD-1365, MIL-STD-209	00000000	0000000	0000000

Extension Spring Stud Anchors

A black-oxide finish provides these steel anchors with mild corrosion resistance. Attach an extension spring to an anchor and then thread the anchor into your part for a secure connection.

	Thread
	Size	Min. Lg., mm	Spacing	Lg., mm	Dia., mm	Hole Dia., mm		Each
Black-Oxide Steel



		M6 × 1 mm	22	Coarse	32	6	4	0000000	00000

Corrosion-Resistant Extension Spring Stud Anchors

These stainless steel stud anchors offer excellent corrosion resistance. Attach an extension spring to an anchor and then thread the anchor into your part for a secure connection.

	Thread
	Size	Min. Lg., mm	Spacing	Lg., mm	Dia., mm	Hole Dia., mm		Each
18-8 Stainless Steel



		M6 × 1 mm	22	Coarse	32	6	4	000000000	000000

Corrosion-Resistant Swiveling Extension Spring Stud Anchors

These stainless steel stud anchors offer excellent corrosion resistance. The head swivels 360° so the spring stays straight and properly coiled. Attach an extension spring to an anchor and then thread the anchor into your part for a secure connection. To make tightening easier, anchors have a hex socket on the bottom and wrench flats at the top of the threads.

	Thread
	Size	Min. Lg., mm	Spacing	Lg., mm	Dia., mm	Hole Dia., mm	Hex Size, mm		Each
18-8 Stainless Steel



		M6 × 1 mm	22	Coarse	32	6	4	2	000000000	000000

Swiveling Extension Spring Stud Anchors

A black-oxide finish provides these steel anchors with mild corrosion resistance. The head swivels 360° so the spring stays straight and properly coiled. Attach an extension spring to an anchor and then thread the anchor into your part for a secure connection. To make tightening easier, anchors have a hex socket on the bottom and wrench flats at the top of the threads.

	Thread
	Size	Min. Lg., mm	Spacing	Lg., mm	Dia., mm	Hole Dia., mm	Hex Size, mm		Each
Black-Oxide Steel



		M6 × 1 mm	22	Coarse	32	6	4	2	000000000	000000