We will reply to your message within an hour.
Place these flexible vinyl caps over the ends of your angle iron and they conform for a snug fit.
Made of rigid plastic, these caps provide more wear resistance to the ends of angle iron than vinyl caps but are not as flexible.
Guard the corners of fragile materials such as glass and mirrors.
Bolt two same-size flanges together with a gasket to create an access point within a line. Flanges are an economical option for gravity-flow chemical waste systems. They are ABS plastic, which has excellent strength and impact resistance and good chemical resistance.
Bolt two same-size flanges together with a gasket to create an access point within a line. Also known as Schedule 40 flanges, they are the industry standard for gravity-flow drain, waste, and vent (DWV) applications.
Lighter in weight than metal quick-disconnect couplings, these couplings are plastic.
Quick-disconnect couplings consist of a plug and a socket that join with a latch so you can easily connect and disconnect your line. Use in applications up to 120 psi.
Couplings consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are designed for coolant applications up to 200 psi. Also known as coolant-line mold couplings.
With an easy-to-cut hose and push-to-connect fittings, you can install a compressed air line system in just a few hours.
Create a retracting air line that meets your needs.
Because they tightly thread to M12 connections, these connectors won’t let contaminants in or come loose from vibration in rugged industrial environments and automated systems as they send power and signal or just power to your equipment.
Quickly mate these connectors by pushing them together. They're often used with 12 mm proximity switches and valves in automated systems.
Also known as pico connectors, these connectors are often used with 8 mm and smaller proximity switches and photoelectric switches.
Use these general purpose connectors indoors in high vibration applications. A quarter turn locks them together when mated to remain secure in high-vibration applications.
A good fit for tight spaces, these connectors are also known as NEMA midget plugs. They turn to lock together when mated to prevent accidental disconnection.
Also known as twist-lock devices, these connectors withstand tough, repetitive use, and are more durable than standard turn-lock connectors. They turn to lock together when mated to prevent accidental disconnection.
Built to handle tough, repetitive-use applications, these are more durable than standard straight-blade connectors.
Use these connectors in general purpose residential and commercial applications.
A good fit for tight spaces, these are smaller than standard straight-blade plugs. Also known as NEMA midget plugs.
Also known as hospital-grade connectors, these have an extra-tight fit when mated to remain secure in high-vibration environments.
Assemble a connector that can handle multiple applications at once. Combine inserts that send power, signal, and data with a base and a hood.
Build a connector that fits in tight spaces by combining male and female inserts for power and signal with a compact base and a hood.
Protect connections while maintaining access. The base and hood latch together securely yet can be quickly detached for equipment repair or replacement.
A rubber seal and stainless steel hardware give these connectors excellent chemical resistance. They're rated NEMA 12, 4X, and IP65 for protection against corrosion, oil, and washdown environments.
Often used with thermosensors or brakes on large motors, these carry more than twice the current of standard latching connectors.
Carry up to four times the current of standard Compact Latching Connectors. The base and hood latch together securely, yet can be quickly detached for equipment repair or replacement.
The smallest latching connectors we offer, these fit in tight spaces. The base and hood latch together securely, yet can be quickly detached for equipment repair or replacement.
Power hydraulic and air-powered valves, motors, pumps, and pressure switches.
With thick threads similar to a light bulb, these connectors take only a few turns to lock into place for a secure connection in washdown and high-vibration areas. Detach them just as quickly for frequent maintenance.
Install these connectors directly onto circuit boards to carry DC power from a power supply to your device. The industry standard barrel-style ends, which are often found on power supplies for laptops, wireless routers, and other common electronics.
Connect flat flexible cable to circuit boards.
Transmit audio, video, and data through coaxial cable.
These connectors allow you to connect USB devices to a circuit board.
Add ix Industrial connections to printed circuit boards (PCBs).
Add RJ45 connectors to circuit boards.
Protect equipment from electromagnetic interference.
These connectors are designed for use in audio equipment.
Add a D-sub connection to a printed circuit board (PCB). These connectors are often used in applications involving monitoring, control, and communication.
Assemble DB and HD connectors to replace worn out connectors.
When the size or thread type of a fitting doesn't match an existing opening, use these adapters to make the connection.
Thread these fittings into motors, bearings, engine blocks, and other machinery to create a lubrication point.
Prevent damage to bearing seals caused by over-lubrication—these fittings automatically stop grease flow when pressure is within the shut-off range.
Keep thin grease from leaking out—the check valve on these fittings has a Buna-N seat that creates a tighter seal than check valves on other grease fittings.
The pins on these fittings lock with dispensing tips for pin-style fittings to create a tight seal.
To fit securely in unthreaded holes, these fittings cut threads as they’re installed.
Drive these fittings into unthreaded holes.