An electric motor and a hydraulic pump perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control.

Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.

Warning: Never use to lift people.

The tabletop can go as low as 3", making loading and unloading from the floor and pallets easier. Tables have an electric motor and a hydraulic pump that perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control. A toe guard at the base of the table provides safety for the operator.

Warning: Never use to lift people.

Load pallets onto these tables directly from a pallet truck—no ramps or forklifts needed. When fully lowered, they sit close to the ground, so it’s easy to move loads on and off the floor. Roll a pallet truck into the center and lower the pallet onto the table. An electric motor and a hydraulic pump perform repetitive lifting and positioning with the push of a button or foot pedal. All tables have a toe guard at the base to protect you from foot injuries when the table is lowered.

Style A tables are hand-operated and have a U-shaped platform, so you can guide your pallet truck into the open center. Use them with plastic and wooden pallets with open bottoms, or with wire containers.

Style B tables are foot-operated and have a wide, solid platform that only sits 1/2" off ground when lowered for versatile, easy loading. Roll a pallet truck, cart, or trolley directly onto them. They hold open- and closed-bottom pallets, large containers, and bulky or irregularly shaped items.

The turntable rotates to reduce reaching. Tables have an electric motor and a hydraulic pump that perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control.

Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.

Warning: Never use to lift people.

An extra-large tabletop provides plenty of room for oversized loads. Tables have an electric motor and a hydraulic pump that perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control.

Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.

Warning: Never use to lift people.

Connect these tables to your compressed air system; a hydraulic pump and an air-driven motor make repetitive lifting and positioning less of a chore. Tables have a compact design, so they fit in confined spaces.

Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.

Warning: Never use to lift people.

Make repetitive lifting and positioning less of a chore. These tables have a foot lever and hydraulic pump to raise the load. A hand knob provides controlled lowering. All have a compact design, so they fit in confined spaces.

Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.

Warning: Never use to lift people.

These stands keep the top of your load at a convenient height; an air cylinder automatically returns the stand to your set height as you add or remove parts of your load. The turntable rotates 360° to reduce reaching. A maximum of 60 psi of air is needed for setup but not for operation. Adjust height before adding pallets. A three-position knob allows capacity adjustments while a relief valve prevents pressure build-up to provide overload protection. The stand must be loaded to at least the minimum capacity for auto-leveling to engage.

Warning: Not for lifting. Never use to support people.

Platforms support material directly without an additional pallet. A hydraulic pump powered by a rechargeable battery raises and lowers loads with the push of a button. The push-button control has a self-retracting cord. Two swivel casters at the rear of the lift truck makes steering and pivoting easy. Once the truck is in place, engage the floor lock to lift and lower loads. They have nonmarking phenolic wheels that roll best on smooth surfaces.

Warning: Never use to lift people.

Lift and lower heavy loads with the push of a button—these trucks have a battery-powered hydraulic pump. They’re easier to use than manual lift trucks, since you don’t need to turn a crank or pump a pedal. You can also make finer height adjustments to position loads exactly where you need them. Two swivel casters at the rear of the lift truck make steering and pivoting easy. Adjust the width of the forks to fit pallets, skids, and other loads in many sizes.

Counterbalanced bases require a counterweight set (sold separately) to offset loads. Unlike straddle bases, they don’t have front-facing legs that can get in the way when you’re loading or unloading racks, trucks, or machinery.

Adjustable-width straddle bases have front-facing legs that sit on either side of your load for support. You can adjust the width to fit them around open and closed-bottom pallets. Those with a pivoting handle give you better leverage and control in tight spaces. The handle adjusts up or down.

Warning: Never use to lift people.

Skip the ramp—these battery-powered trucks lift cargo and then themselves into trailers to position pallets inside. With the press of a button, they raise loads from ground level to trailer height. Once the load is in place, manually retract the legs to move them out of the way, then press the button again to lift the truck inside the trailer. Engage the wheel brakes before lifting or lowering a load.

Warning: Never use to lift people.