McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    31 Products

    Stick Welders

    Image of Product. Front orientation. Stick Welders.
    Form strong, deep welds in everything from rusted pipes to heavy machinery out in the field. These welders produce a smooth arc with a variety of electrodes, so you can fuse metals as hard as steel and as soft as copper. Weighing only 20 lbs., you can pick them up with one hand to move between tasks. Compared to other lightweight welders, they’re powerful enough to tackle thicker metal, up to 5/16" thick. They plug into 120V and 230V outlets, so you can use them nearly anywhere power is available.
    Input
    For Min.
    Material Thk.
    For Min.
    Sheet Metal Ga.
    Duty Cycle
    Voltage, V AC
    Frequency,
    Hz
    Phase
    Output Current @ Voltage
    Wt.,
    lb.
    Plug Connection
    NEMA Type
    Includes
    Each
    Lincoln K5419-1
    1/16"123 Minutes On, 7 Minutes Off120, 23060Single65 amp @ 23V DC
    95 amp @ 14V DC
    225 amp @ 19V DC
    225 amp @ 29V DC    		206-50
    		13-ft. Electrode Cable & Electrode Holder
    13-ft. Work Cable & Clamp
    120V AC Plug Adapter
    Shoulder Strap    		7967A3030000000
     

    MIG Welders

    Image of Product. Front orientation. MIG Welders.
    Powerful, practical, and made in the U.S., our Lincoln MIG welder plugs into common 120V outlets to produce an output range of 30-140 amps. That’s enough power to weld steel as thick as 3/16" in a single pass.
    The system comes with a gun, nozzles, contact tips, sample spools of wire, and everything else you need for gasless, flux-cored welding. For solid-core MIG welding, connect the regulator to a tank of shielding gas (not included).
    For
    Material Thk.
    For Sheet
    Metal Thk.
    Input
    For Wire
    Construction
    For Welding Wire
    Construction
    For Wire Dia.
    Min.
    Max.
    Min.
    Max.
    Voltage,
    V AC
    Freq.,
    Hz
    Electrical
    Phase
    Output Current
    @ Voltage
    Includes
    Each
    Lincoln Easy-MIG 140
    Solid
    		Flux Core0.025", 0.030", 0.035"1/64"11/64"24712060Single90 amp @ 19.5V DCWelding Gun Contact Tips
    1/2-lb. Spool of 0.025" Copper-Coated Steel Solid Wire
    1/2-lb. Spool of 0.035" Steel Flux-Core Wire
    10-ft. Ground Cable with Ground Clamp
    Welding Hose
    Argon-Mixed Gas Regulator
    Gas Nozzle for Welding Solid-Core Wire
    Gasless Nozzle for Welding Flux-Core Wire    		7264A120000000
     
    Accessories for MIG Welders
    Carts
    Image of Product. Front orientation. Carts.
    Transport your welder from place to place while securing your gas tank from falling over. The angled top surface allows for easy access to the welder’s controls, with a lower tray for added storage.
    Lg.
    Wd.
    For Max. Gas
    Tank Dia.
    Each
    27"11 3/4"7"7264A1130000000
    Welding Kits
    Image of Product. Top orientation. MIG Welder Aluminum Welding Kits.
    Kits include a spool gun that houses aluminum wire in the gun itself, reducing the length of travel and risk of tangles.
    Includes
    Each
    Gun with Spool Mount
    1-lb. Spool of 0.035" 4043 Aluminum Solid Wire
    Welding Gun Contact Tips
    Electric Harness with Toggle Switch
    Carrying Case    		7264A150000000

    Multiprocess Welders

    Image of Product. Front orientation. Multiprocess Welders.
    Repair most metal with a single machine—these welders perform MIG, TIG, and stick welds. Often used for general purpose applications, MIG welding is faster than other techniques and easiest to learn. TIG welding works on thin metal and leaves a clean appearance, so it’s commonly used for finish work. Stick welding is best for heavy duty welds on thick or dirty metal. It’s also the easiest to do outdoors, since it doesn’t use shielding gas that could be affected by wind.
    Input
    For Wire
    Construction
    For Welding Wire
    Construction
    For Wire Dia.
    For Min.
    Material Thk.
    For Min.
    Sheet Metal Ga.
    Duty Cycle
    Voltage,
    V AC
    Frequency,
    Hz
    Electrical
    Phase
    Output Current @ Voltage
    Wt.,
    lb.
    Includes
    Each
    Lincoln K3461-1
    Solid
    		Flux Core0.025", 0.030", 0.035"1/64"246 Minutes On, 4 Minutes Off12060Single115 amp @ 15V AC
    80 amp @ 23V AC
    95 amp @ 19V AC    		351/2-lb. Spool of 0.025" ER70S-6 Solid Wire
    1/2-lb. Spool of 0.035" E71T-11 Flux-Core Wire
    10-ft. Ground Cable with Ground Clamp
    Gas Nozzle for Welding Solid-Core Wire
    Gas Regulator
    Gasless Nozzle for Welding Flux-Core Wire
    Welding Gun Contact Tips    		3729N110000000
     
    Accessories for Multiprocess Welders
    TIG Torches
    Image of Product. Front orientation. TIG Torches.
    TIG torches are required for TIG welding.
    Torch Body
    Type
    Duty Cycle
    Max. Current,
    amp
    Cooling
    Method
    Cable Lg.,
    ft.
    Cable
    Material
    Includes
    Each
    Rigid Neck6 Minutes On, 4 Minutes Off125Air12.5Rubber
    		Cable and Hose Assembly
    Long Back Cap
    Torch Body
    Torch Handle    		3729N5530000000
    Welding Foot Pedals
    Image of Product. Front orientation. Welding Foot Pedals.
    Welding foot pedals let you control amperage while TIG welding.
    Cable Lg.,
    ft.
    Each
    133729N5540000000
    MIG Spool Guns
    Image of Product. Front orientation. MIG Guns.
    MIG spool guns hold welding wire for use when MIG welding aluminum.
    For Wire
    Construction
    For Welding Wire
    Construction
    For Wire Dia.
    Duty Cycle
    Max. Current,
    amp
    Cooling
    Method
    Cable Lg.,
    ft.
    Cable
    Material
    Includes
    Each
    Spool Gun
    Solid
    		Flux Core, Metal Core0.030", 0.035"3 Minutes On, 7 Minutes Off130Air10Rubber
    		1-lb. Spool of 0.035" ER4043 Solid Wire
    Three Contact Tips
    Nozzle
    Carrying Case    		3729N5520000000
     
    Carts
    Image of Product. Front orientation. Carts.
    Use carts to transport welders, gas, and accessories.
    Lg.
    Wd.
    For Max. Gas
    Tank Dia.
    Each
    27"11 3/4"7"7264A1130000000

    MIG Guns

    Image of Product. Front orientation. MIG Guns. Standard Gun.

    Standard Gun

    Pair these guns with a welder to direct the flow of MIG welding wire and electric current. With no need for a filler rod, MIG welding is faster than TIG welding, and ideal for thick base metals, including iron beams and carbon steel. At four pounds or less, our MIG guns are comfortable to hold, ensuring steady-handed results with every job. Guns with longer duty cycles can weld at their full amperage for longer periods of time without overheating.
    Check the max current amperage and manufacturer of your welder. Using a gun with a higher amperage than your welder can cause damage to both.
    For Wire
    Max. Current,
    amp
    For
    Mfr.
    Mfr. Model No.
    Construction
    Dia.
    Duty Cycle
    Cable Lg.,
    ft.
    Cable
    Material
    Includes
    Each
    Standard Gun
     
    Air Cooled
    100LincolnLincoln Magnum 100LSolid, Flux Core, Metal Core0.025", 0.030", 0.035"4 Minutes On, 6 Minutes Off10Rubber
    		Contact Tip
    Nozzle    		77365A820000000
    200LincolnLincoln Magnum 200Solid, Flux Core, Metal Core0.025", 0.030"6 Minutes On, 4 Minutes Off15Rubber
    		Contact Tip
    Nozzle    		77365A83000000
    250LincolnLincoln Magnum PRO 250LSolid, Flux Core, Metal Core0.025", 0.030", 0.035", 0.040", 0.045"4 Minutes On, 6 Minutes Off15Rubber
    		Contact Tip
    Nozzle    		77365A84000000
    300LincolnLincoln Magnum 300Solid, Flux Core, Metal Core0.035", 0.040", 0.045"6 Minutes On, 4 Minutes Off10Rubber
    		Contact Tip
    Nozzle    		77365A86000000
    400LincolnLincoln Magnum 400Solid, Flux Core, Metal Core0.045", 0.047", 0.052", 0.063"6 Minutes On, 4 Minutes Off15Rubber
    		Contact Tip
    Nozzle    		77365A87000000
     

    TIG Welders

    Image of Product. Front orientation. TIG Welders. Lincoln K2535-1.

    Lincoln K2535-1

    Best for welding thin metal, these TIG welders make clean, precise welds and are often used for finishing work. They include components such as torches, cable, and hose. A shielding gas is required for use.
    Lincoln—Lincoln welders have a built-in polarity switch to select AC or DC amperage.
    Input
    Electrical
    For Min.
    Material Thk.
    For Min.
    Sheet Metal Ga.
    Duty Cycle
    Voltage, V AC
    Freq.,
    Hz
    Electrical
    Phase
    Output Current @ Voltage
    Wt.,
    lb.
    Cord Lg.,
    ft.
    Connection
    No. of
    Blades
    Includes
    Each
    Lincoln K2535-1
    1/64"241 Minute On, 9 Minutes Off208/23060Single225 amp @ 15.7V AC, 225 amp @ 15.7V DC2129Straight Blade3TIG Torch
    12-ft. Welding Cable
    10-ft. Ground Cable with Ground Clamp
    Gas Regulator
    Welding Hose
    Foot-Pedal Control
    Built-In Polarity Switch    		7373A32000000000
     
    Accessories for TIG Welders
    Carts for Lincoln TIG Welders
    Image of Product. Solid Platform. Front orientation. Carts.

    Solid Platform

    The carts make it easy to transport your welder and gas tank from place to place.
    Lg.
    Wd.
    For Max. Gas
    Tank Dia.
    Includes
    Each
    42"20 1/2"9"Bracket and chain for securing a gas tank7373A23000000000
    Torch Kits for Lincoln TIG Welders
    Image of Product. Front orientation. TIG Torches.
    Includes
    Each
    Long Back Cap
    0.040" Collet
    1/16" Collet
    3/32" Collet
    0.040" Collet Body
    1/16" Collet Body
    3/32" Collet Body
    1/4" Alumina Nozzle
    5/16" Alumina Nozzle
    3/8" Alumina Nozzle
    7" Long Tungsten Electrode with 0.040" Diameter
    7" Long Tungsten Electrode with 1/16" Diameter
    7" Long Tungsten Electrode with 3/32" Diameter    		7373A220000000

    Lincoln Plasma Cutter Replacement Parts

    Image of Product. Front orientation. Plasma Cutter Replacement Parts. Lincoln Plasma Cutter Replacement Parts, Cutting Tips.
    Image of Product. Front orientation. Plasma Cutter Replacement Parts. Lincoln Plasma Cutter Replacement Parts, Electrodes.

    Cutting Tips

    Electrodes

    Image of Product. Front orientation. Plasma Cutter Replacement Parts. Lincoln Plasma Cutter Replacement Parts, Retaining Caps.
    Image of Product. Front orientation. Plasma Cutter Replacement Parts. Lincoln Plasma Cutter Replacement Parts, Gouging Shields.

    Retaining Caps

    Gouging Shields

    Image of Product. Front orientation. Plasma Cutter Replacement Parts. Lincoln Plasma Cutter Replacement Parts, Swirl Rings.
    Image of Product. Shield Cups. Front orientation. Plasma Cutter Replacement Parts. Lincoln Plasma Cutter Replacement Parts, Shield Cups, Swirl Rings.

    Swirl Rings

    Shield Cups

    Image of Product. Front orientation. Plasma Cutter Replacement Parts. Lincoln Plasma Cutter Replacement Parts, Spacers.

    Spacers

    Keep your Lincoln plasma cutter running with replacement electrodes, cutting tips, shield cups, and other parts that degrade with regular use. Replacing them before they fail prevents poor cut quality and damage to the torch body.
    Cutter Component
    Mfr. Part
    No.
    Pkg.
    Qty.
    Pkg.
    For Lincoln P20
    Shield Cup, Swirl RingKH65317829A37000000
    Cutting Tip, ElectrodeKH65227829A3600000
     
    For Lincoln LC65
    Cutting TipKP2844-417829A5200000
    ElectrodeKP2844-117829A5100000
    Retaining CapKP2844-917829A5300000
    Gouging ShieldKP2844-1317829A3800000
    Swirl RingKP2844-1417829A3900000
     
    For Lincoln LC40 and LC65
    SpacerKP2843-1017829A4900000
     
    For Lincoln LC40
    Cutting TipKP2843-217829A4700000
    ElectrodeKP2843-117829A4600000
    Retaining CapKP2843-517829A4800000
     
    For Lincoln LC25
    Cutting TipKP2842-217829A420000
    ElectrodeKP2842-117829A4100000
    Retaining CapKP2842-317829A4300000
    SpacerKP2842-517829A4500000
     
    back to top