Argon Welding Gas Regulators

Filter by

For Use With

Outlet Pressure

Inlet CGA Number

Maximum Outlet Pressure Gauge Measurement

Maximum Inlet Pressure

3,000 psi

7,500 psi

Outlet Connection Port

Number of Stages

Outlet Connection

Outlet Thread Type

Material

Outlet Thread Size

Inlet Gender

Fitting Connection

Maximum Inlet Pressure Gauge Reading

Thread Type

Outlet Gender

Inlet Connection Port

Hose

Pipe

Maximum Pressure

Less than 1,000 psi

1,000 psi to 1,999 psi

2,000 psi to 3,999 psi

4,000 psi to 4,999 psi

Body Material

Diaphragm Material

Neoprene/Nylon Plastic

Rubber

Stainless Steel

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

REACH

Compliant

Not Compliant

RoHS

Compliant with Exemptions

Not Compliant

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Exempt

Number of Gauge Ports

Forward

How can we improve?

36 Products

About Pressure-Regulating Valves

Find a regulator that’s compatible with your gas, matches the CGA number on your tank, and has twice the operating pressure of your application’s normal range.

Tank-Mount Pressure-Regulating Valves for Air and Inert Gas

These valves automatically reduce a high inlet pressure from compressed gas tanks to a lower, stable outlet pressure. All have Compressed Gas Association (CGA) numbered inlet fittings for secure connections to compressed gas tanks. Choose a valve with the same CGA number as your tank and other system components. Valves have a gauge to monitor outlet pressure and a gauge to monitor inlet pressure from the tank.

Choose a valve with a maximum outlet pressure that’s approximately twice your application’s normal operating pressure. Your operating pressure should never exceed 75% of the valve’s maximum outlet pressure.

Single Stage

Single-stage valves reduce pressure in one step, which causes the outlet pressure to fluctuate slightly as you empty the tank. They’re best for applications where a constant outlet pressure isn’t critical.

37° Flared Outlet Connection and 45° Flared Outlet Connection—Valves with flared tube outlet fittings form a tight seal on metal tubing.

Brass Body—Valves with a brass body have a longer service life than valves with a brass and steel body.

Stainless Steel Diaphragm—Valves with a stainless steel diaphragm can withstand harsh environments.

	Inlet				Outlet				Material
	CGA No.	Location	Thread Direction	Pressure Gauge Reading Range, psi	Location	Thread Direction	Pressure Range, psi	Pressure Adjustment Method	Body	Seal	Diaphragm	Temp. Range, ° F		Each
For Argon, Helium, and Nitrogen







				37° Flared UNF Male Outlet × NGO Male Inlet

				580	Side	Right Hand	0 to 4,000	Side	Right Hand	10 to 200	—	Brass	Polyurethane Rubber	Neoprene/Nylon	-20 to 120	66325A42	0000000




						45° Flared UN/UNF (SAE 45°) Male Outlet × NGO Male Inlet

						580	Side	Right Hand	0 to 4,000	Side	Right Hand	0 to 250	T-Handle	Brass	PTFE	Neoprene	-20 to 120	3687N113	000000


						580	Side	Right Hand	0 to 4,000	Side	Right Hand	0 to 500	T-Handle	Brass	PTFE	Neoprene	-20 to 120	66325A23	000000




								5/8"-18 UNF Female Outlet × NGO Male Inlet

								580	Side	Right Hand	0 to 4,000	Side	Right Hand	0 to 125	T-Handle	Brass	PTFE	Stainless Steel	-20 to 120	3687N117	000000




										9/16"-18 UNF Male Outlet × NGO Male Inlet

										580	Side	Right Hand	0 to 4,000	Side	Right Hand	0 to 50	T-Handle	Brass	PTFE	Neoprene	-20 to 120	3687N115	000000


										580	Side	Right Hand	0 to 4,000	Side	Right Hand	0 to 125	T-Handle	Brass	PTFE	Rubber	-20 to 120	7897A38	000000
										580	Side	Right Hand	0 to 4,000	Side	Right Hand	0 to 145	Knob	Brass/Steel	PTFE	Rubber	-20 to 120	7897A65	000000
										580	Side	Right Hand	0 to 4,000	Side	Right Hand	0 to 200	T-Handle	Brass	PTFE	Rubber	-20 to 120	7897A12	000000

Two Stage

Two-stage valves progressively reduce pressure over two steps for more consistent outlet pressure at all times. They’re often used in applications that require a constant outlet pressure regardless of the tank level.

Brass Body—Valves with a brass body have a longer service life than valves with a brass and steel body.

Stainless Steel Diaphragm—Valves with a stainless steel diaphragm can withstand harsh environments.

	Inlet				Outlet				Material
	CGA No.	Location	Thread Direction	Pressure Gauge Reading Range, psi	Location	Thread Direction	Pressure Range, psi	Pressure Adjustment Method	Body	Seal	Diaphragm	Temp. Range, ° F		Each
For Argon, Helium, and Nitrogen







				1/4 NPT Female Outlet × NGO Male Inlet

				580	Side	Right Hand	0 to 4,000	Side	Right Hand	0 to 250	T-Handle	Brass	PTFE	Neoprene	-20 to 120	3687N122	0000000


				580	Side	Right Hand	0 to 4,000	Side	Right Hand	0 to 250	T-Handle	Brass	PTFE	Stainless Steel	-20 to 120	3687N126	000000




						5/8"-18 UNF Female Outlet × NGO Male Inlet

						580	Side	Right Hand	0 to 4,000	Side	Right Hand	0 to 50	T-Handle	Brass	PTFE	Neoprene	-20 to 120	3687N121	000000


						580	Side	Right Hand	0 to 4,000	Side	Right Hand	0 to 50	T-Handle	Brass	PTFE	Stainless Steel	-20 to 120	7897A22	000000
						580	Side	Right Hand	0 to 4,000	Side	Right Hand	0 to 125	T-Handle	Brass/Steel	PTFE	Rubber	-20 to 120	7897A16	000000
						580	Side	Right Hand	0 to 4,000	Side	Right Hand	0 to 125	T-Handle	Brass	PTFE	Stainless Steel	-20 to 120	7897A23	000000

Tank-Mount High-Pressure-Regulating Valves for Air and Inert Gas

Often used for pressure-vessel testing and other high-pressure applications, these valves can handle at least seven times the outlet pressure of standard tank-mount pressure-regulating valves. They automatically reduce a high inlet pressure from compressed gas tanks to a lower, stable outlet pressure. All have Compressed Gas Association (CGA) numbered inlet fittings for secure connections to compressed gas tanks. Choose a valve with the same CGA number as your tank and other system components. Outlet fittings are Swagelok® for a leak-free seal around hard metal tubing in high-pressure lines. Also known as instrumentation fittings, Swagelok® fittings are compatible with Parker A-Lok, Gyrolok, Bilok, and Tylok fittings. Valves have a gauge to monitor outlet pressure and a gauge to monitor inlet pressure from the tank. They are single stage and reduce pressure in one step, which causes the outlet pressure to fluctuate slightly as you empty the tank.

For Argon, Helium, and Nitrogen

	Inlet					Outlet					Material
	CGA No.	Location	Thread Direction	Pressure Gauge Reading Range, psi	No. of Stages	For Tube OD	Location	Pressure Range, psi	Pressure Adjustment Method	Shape	Body	Seal	Temp. Range, ° F		Each
NGO Female Inlet × Swagelok® Female Outlet



		677	Side	Left Hand	0 to 7,500	Single	1/4"	Bottom	300 to 4,500	T-Handle	90° Elbow	Brass	PCTFE	-20 to 120	6677A14	000000000


		NGO Male Inlet × Swagelok® Female Outlet



				580	Side	Right Hand	0 to 4,000	Single	1/4"	Bottom	200 to 3,000	T-Handle	90° Elbow	Brass	PCTFE	-20 to 120	6677A13	000000

Easy-Read Tank-Mount Pressure-Regulating Valves with Flowmeter for Inert Gas

Flowmeters let you see the gas flow rate from a distance. These valves automatically reduce a high inlet pressure from compressed gas tanks to a lower, stable outlet pressure. All have Compressed Gas Association (CGA) numbered inlet fittings for secure connections to compressed gas tanks. Choose a valve with the same CGA number as your tank and other system components. They have a gauge for monitoring inlet pressure from the tank.

For Argon

Single Stage—Single-stage valves reduce pressure in one step, which causes the outlet pressure to fluctuate slightly as you empty the tank. They’re best for applications where a constant outlet pressure isn’t critical.

1 Flowmeter—Valves with one flowmeter are for one piece of equipment on a tank. The flowmeter has a single scale.

	Inlet					Outlet					Material
	CGA No.	Location	Thread Direction	Pressure Gauge Reading Range, psi	No. of Stages	Thread Size	Location	Thread Direction	Flow Range	No. of Flowmeters	Body	Seal	Diaphragm		Each
UNF Female Outlet × NGO Male Inlet



		580	Side	Right Hand	0 to 4,000	Single	5/8"-18	Side	Right Hand	0 scfh to 70 scfh	1	Brass	PTFE	Neoprene	78595A43	0000000

Valve Union Fittings

		Each
Adapter	78595A49	000000

For Argon and Argon/Carbon Dioxide Blend

Male Inlet × Female

Outlet With One

Flowmeter

1 Flowmeter—Valves with one flowmeter are for one piece of equipment on a tank. The flowmeter has a single scale.

	Inlet					Outlet					Material
	CGA No.	Location	Thread Direction	Pressure Gauge Reading Range, psi	No. of Stages	Thread Size	Location	Thread Direction	Flow Range	No. of Flowmeters	Body	Seal	Diaphragm		Each
UNF Female Outlet × NGO Male Inlet



		580	Side	Right Hand	0 to 3,000	Single	5/8"-18	Side	Right Hand	0 to 70 scfh (Argon), 0 to 70 scfh (Argon/Carbon Dioxide Blend)	1	Brass	PTFE	Neoprene	78595A5	0000000

Valve Union Fittings

		Each
Adapter	78595A49	000000

For Argon, Argon/Carbon Dioxide Blend, and Helium

Two Stage—Two-stage valves progressively reduce pressure over two steps for more consistent outlet pressure at all times. They’re often used in applications that require a constant outlet pressure regardless of the tank level.

1 Flowmeter—Valves with one flowmeter are for one piece of equipment on a tank. The flowmeter has a single scale.

	Inlet					Outlet					Material
	CGA No.	Location	Thread Direction	Pressure Gauge Reading Range, psi	No. of Stages	Thread Size	Location	Thread Direction	Flow Range	No. of Flowmeters	Body	Seal	Diaphragm		Each
UNF Female Outlet × NGO Male Inlet



		580	Side	Right Hand	0 to 3,000	Two	5/8"-18	Side	Right Hand	0 to 40 scfh (Argon), 0 to 40 scfh (Argon/Carbon Dioxide Blend), 0 to 150 scfh (Helium)	1	Brass	PTFE	Neoprene	78595A495	0000000

Valve Union Fittings

		Each
Adapter	78595A49	000000

For Argon, Argon/Carbon Dioxide Blend, Carbon Dioxide, and Helium

Male Inlet × Female

Outlet With One

Flowmeter

1 Flowmeter—Valves with one flowmeter are for one piece of equipment on a tank. The flowmeter has a single scale.

	Inlet					Outlet					Material
	CGA No.	Location	Thread Direction	Pressure Gauge Reading Range, psi	No. of Stages	Thread Size	Location	Thread Direction	Flow Range	No. of Flowmeters	Body	Seal	Diaphragm		Each
UNF Female Outlet × NGO Male Inlet



		580	Side	Right Hand	0 to 4,000	Single	5/8"-18	Side	Right Hand	0 to 60 scfh (Argon) 0 to 60 scfh (Argon/Carbon Dioxide Blend) 0 to 50 scfh (Carbon Dioxide) 0 to 160 scfh (Helium)	1	Brass	Buna-N	Brass	78595A394	0000000

Valve Union Fittings

		Each
Adapter	78595A49	000000

For Argon and Helium


Male Inlet × Female Outlet With One Flowmeter	Male Inlet × Female Outlet With Two Flowmeters

1 Flowmeter—Valves with one flowmeter are for one piece of equipment on a tank. The flowmeter has a single scale.

2 Flowmeters—Valve with two flowmeters lets you simultaneously run two pieces of equipment from one tank. Both flowmeters have a dual scale.

	Inlet					Outlet					Material
	CGA No.	Location	Thread Direction	Pressure Gauge Reading Range, psi	No. of Stages	Thread Size	Location	Thread Direction	Flow Range	No. of Flowmeters	Body	Seal	Diaphragm		Each
UNF Female Outlet × NGO Male Inlet



		580	Side	Right Hand	0 to 3,000	Two	5/8"-18	Side	Right Hand	0 to 18 scfh (Argon), 0 to 50 scfh (Helium)	1	Brass	PTFE	Neoprene	78595A492	0000000


		580	Side	Right Hand	0 to 3,000	Two	5/8"-18	Side	Right Hand	0 to 65 scfh (Argon), 0 to 200 scfh (Helium)	1	Brass	PTFE	Neoprene	78595A493	000000
		580	Side	Right Hand	0 to 4,000	Single	5/8"-18	Side	Right Hand	0 to 45 scfh (Argon), 0 to 140 scfh (Helium)	1	Brass	PTFE	Neoprene	78595A31	000000
		580	Side	Right Hand	0 to 4,000	Single	5/8"-18	Side	Right Hand	0 to 45 scfh (Argon), 0 to 140 scfh (Helium)	2	Brass	PTFE	Neoprene	7952A49	000000

Valve Union Fittings

		Each
Adapter	78595A49	000000

Tank-Mount Pressure-Regulating Valves with Flowmeter for Inert Gas

Commonly used in TIG welding where gas flow/coverage is a concern, these valves measure the gas flow rate in addition to regulating pressure. They automatically reduce a high inlet pressure from compressed gas tanks to a lower, stable outlet pressure. All have Compressed Gas Association (CGA) numbered inlet fittings for secure connections to compressed gas tanks. Choose a valve with the same CGA number as your tank and other system components. Valves have a gauge to monitor the outlet flow rate and a second gauge to monitor inlet pressure from the tank. They are single stage and reduce pressure in one step, which causes the outlet pressure to fluctuate slightly as you empty the tank.

For Argon

	Inlet					Outlet					Material
	CGA No.	Location	Thread Direction	Pressure Gauge Reading Range, psi	No. of Stages	Thread Size	Location	Thread Direction	Flow Range, scfh	Flow Gauge Included	Body	Seal	Diaphragm	Includes	Temp. Range, ° F		Each
UNF Female Outlet × NGO Male Inlet



		580	Side	Right Hand	0 to 4,000	Single	5/8"-18	Side	Right Hand	0 to 60	Yes	Brass	PTFE	Neoprene	—	-20 to 120	7997A65	0000000


		580	Side	Right Hand	0 to 4,000	Single	5/8"-18	Side	Right Hand	0 to 60	Yes	Brass	PTFE	Neoprene	10-ft. long, 3/16" dia. hose with 5/8"-18 male fittings on both ends	-20 to 120	7997A67	000000
		580	Side	Right Hand	0 to 4,000	Single	5/8"-18	Side	Right Hand	0 to 100	Yes	Brass	PTFE	Neoprene	—	-20 to 120	7997A52	000000

High-Purity Tank-Mount Pressure-Regulating Valves for Inert Gas

Reduce contaminants in research sample systems, emission monitoring systems, chromatography, and other high-purity applications that use argon, helium, nitrogen, or carbon dioxide. These valves have a 316 stainless steel and brass body with a smooth finish to reduce dust collection and internal components designed to protect the seal and diaphragm from contamination. They automatically reduce a high inlet pressure from compressed gas tanks to a lower, stable outlet pressure. All have Compressed Gas Association (CGA) numbered inlet fittings for secure connections to compressed gas tanks. Choose a valve with the same CGA number as your tank and other system components. Outlet fittings are Swagelok® for a leak-free seal around hard metal tubing in high-pressure lines. Also known as instrumentation fittings, Swagelok® fittings are compatible with Parker A-Lok, Gyrolok, Bilok, and Tylok fittings. Valves have a gauge to monitor outlet pressure and a gauge to monitor inlet pressure from the tank.

For Argon, Helium, and Nitrogen

Image of Product. Front orientation. Pressure-Regulating Valves. High-Purity Tank-Mount Pressure-Regulating Valves for Inert Gas, For Argon, Helium, and Nitrogen.

Chrome-Plated Brass Body—Chrome-plated valves add a layer of corrosion resistance.

	Inlet					Outlet
	CGA No.	Location	Thread Direction	Pressure Gauge Reading Range, psi	No. of Stages	For Tube OD	Location	Pressure Range, psi	Pressure Adjustment Method	Temp. Range, ° F		Each
NGO Male Inlet × Swagelok® Female Outlet







				Chrome-Plated Brass Body—316 Stainless Steel Diaphragm and PTFE Seal

				580	Side	Right Hand	0 to 4,000	Single	1/4"	Side	0 to 15	Knob	-20 to 120	7951A15	0000000


				580	Side	Right Hand	0 to 4,000	Single	1/4"	Side	0 to 125	Knob	-20 to 120	7951A18	000000
				580	Side	Right Hand	0 to 4,000	Single	1/4"	Side	0 to 500	Knob	-20 to 120	7951A76	000000
				580	Side	Right Hand	0 to 4,000	Two	1/4"	Side	0 to 15	Knob	-20 to 120	7951A25	000000
				580	Side	Right Hand	0 to 4,000	Two	1/4"	Side	0 to 50	Knob	-20 to 120	7951A62	000000
				580	Side	Right Hand	0 to 4,000	Two	1/4"	Side	0 to 125	Knob	-20 to 120	7951A28	000000
				580	Side	Right Hand	0 to 4,000	Two	1/4"	Side	0 to 250	Knob	-20 to 120	7951A77	000000

Tank-Mount Pressure-Regulating Valves for Cryogenic Cylinders

Automatically reduce a high inlet pressure from compressed gas tanks to a lower, stable outlet pressure. These valves can remove gases from liquid cryogenic cylinders. They have Compressed Gas Association (CGA) numbered inlet fittings for secure connections to compressed gas tanks. Choose a valve with the same CGA number as your tank and other system components. Valves come with a gauge to monitor outlet pressure. They are single stage and reduce pressure in one step, which causes the outlet pressure to fluctuate slightly as you empty the tank.

		Inlet				Outlet
	For Use With	CGA No.	Location	Thread Direction	No. of Stages	Thread Size	Location	Thread Direction	Pressure Range, psi	Pressure Adjustment Method	Temp. Range, ° F		Each
UNF Male Outlet × NGO Male Inlet







				Brass Body—Stainless Steel Diaphragm and PTFE Seal

				Nitrogen, Argon	580	Side	Right Hand	Single	9/16"-18	Bottom	Right Hand	0 to 350	T-Handle	-20 to 120	7897A87	0000000