These self-coiling cords stretch to full length and then return to their retracted length for tangle-free storage.

FDA compliant for direct contact with food, these cords are safe to use with 12 mm proximity switches, valves, and power supplies in food, beverage, and pharmaceutical applications.

Also known as pico cords, these cords are often used with low-current 8 mm proximity and photoelectric switches.

Often used for automated systems, motors, and pumps in tough industrial areas such as near welding and metal machining, these cords carry higher current than M5, M8, and M12 cords.

Use these cords in vehicles and other agricultural and construction equipment.

The insulation resists water, oil, and chemicals, so these cords withstand dirty and greasy environments.

Use these cords where ignitable gas and dust may be present. They're CSA certified for Class I, Divisions 1 and 2, Groups B, C, and D; and Class II, Divisions 1 and 2, Groups F and G hazardous environments.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

Change the connection style between an outlet and your equipment.

Keep personnel safe from electric shock with these cords.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission. They have an RJ45 plug on each end.

Unlike the RJ45 ends on traditional Ethernet cords, the threaded M8 ends on these cords keep contaminants out and resist coming loose from vibration.

Often used in robotics, packaging, conveyors, and other applications with constant movement and high temperatures, these silicone rubber cords bend and flex at temperatures up to 325° F.

When mated, these connectors meet NEMA 6P for protection against washdowns and temporary submersion.

Protect RJ45 connectors on Ethernet cables from strain when cables are pulled and bumped.

This cord stock is softer and creates a better seal than standard silicone cord stock in low-pressure applications up to 400° F.

This square-profile cord stock has flat edges on all four sides, which creates a better seal than round profile in static applications, such as hose, pipe, and faucet connections.

This cord stock is softer and creates a better seal in low-pressure applications than standard Buna-N cord stock.

This square-profile cord stock has flat edges on all four sides, which creates a better seal than round profile in static applications, such as hose, pipe, and faucet connections.

Made of FDA-listed material for use with food and beverage, this cord stock resists animal and vegetable oils, citric acid, sodium bicarbonate, and grease.

Use neoprene cord stock to make O-rings for applications that come into contact with water.

This cord stock resists benzene, boric acid, ethylene glycol, and isopropyl alcohol.

This square-profile cord stock has flat edges on all four sides, which creates a better seal than round profile in static applications, such as hose, pipe, and faucet connections.

This cord stock is softer and creates a better seal in low-pressure applications than standard fluoroelastomer cord stock.

More chemical resistant than standard Viton® fluoroelastomer, this cord stock is made of Grade ETP Viton® fluoroelastomer. It resists harsh chemicals, such as calcium hydroxide, methyl ethyl ketone (MEK), and nitric and phosphoric acids.

These kits include everything you need to make your own Buna-N, fluoroelastomer, or EPDM O-rings.

Made of EPDM, this foam has the best resistance to water, sunlight, and oxidation of all the foam we offer.

In addition to having good resistance to water, sunlight, and oxidation, these neoprene foam sheets and strips resist swelling when they come into contact with oil.

Made of EPDM foam, these sheets and strips have the best resistance to water, sunlight, and oxidation of all the foam we offer.

Because this natural rubber foam readily bounces back to shape after compression, it’s a good choice for repetitive sealing applications, such as on doors.

These vinyl foam sheets and strips are so conformable that once they're compressed they won't fully spring back. Use them to fill gaps and seal uneven surfaces.

These EPDM foam tubes have the best resistance to water, sunlight, and oxidation of all the foam tubes we offer.

These silicone foam cords meet NSF/ANSI 51 for food equipment materials. Use them to seal and cushion narrow spaces in food service equipment.

This premium silicone is the most resilient foam we offer. It is equivalent to Cohrlastic and is also known as Norseal and silicone sponge.

Even after extended compression, these sheets and strips will bounce back to shape.

A thin layer of aluminized fiberglass on this silicone foam reflects heat to protect sensitive equipment.

Seal and damp vibration around high-temperature food-service equipment with these silicone foam sheets and strips.

In addition to being lighter in weight than silicone foam, this polyimide foam also remains soft and conformable across a broader temperature range.

Seal and damp vibration in high-temperature equipment with these rings.

Even after extended compression, these high-performance polyurethane foam sheets and strips bounce back to shape faster than any other foam we offer. Also known as Poron urethane, they also stand up to wear caused by rubbing and scraping.

These dual-material foam sheets and strips have ultra-soft polyurethane foam on one side and chemical-resistant polyethylene foam on the other. They are widely used in packaging applications to absorb shock and damp vibration.

Often used for impact pads, gaskets, and enclosure seals, these polyurethane foam sheets and strips absorb shock better than other resilient foam.

Commonly called memory foam and Confor, these sheets and strips have the best cushioning qualities of all the foam we offer.

Made of FDA-listed materials, these polyethylene foam sheets are often used as packaging for food products to absorb shock and damp vibration.

Exceptionally strong, this lightweight ionomer foam offers excellent resistance to impact, UV light, and water. It stands up to wear caused by rubbing and scraping and is often used on bumpers and buoys.

Use these foam half rounds as a cushioning bumper.

Also called plucking foam, these scored foam sheets allow you to pull out individual cubes for custom-shaped packaging.

Offering excellent resistance to corrosive environments, these Viton® fluoroelastomer foam sheets and strips stand up to a wide variety of chemicals, fuels, and oils.

Protect electronic components from electrostatic shocks and chemicals while safeguarding them from bumps and drops during shipping and storing.

This cord has excellent stretch recovery and won't become brittle.

Strap is wider than cord to distribute pressure across the load.

These straps have holes on each end to accept a hook.

Color-coded by the year and quarter of manufacture, this cotton-covered elastic cord meets MIL-C-5651.

Also known as bungee cords and shock cords, these tie downs have an outer layer of fabric to protect the inner elastic from abrasion.

Cinch the loop around large anchor points.

Adjust the length by attaching the hook into a slot in the strap.

Shorten the length of the tie downs between the hooks.

Suitable for marine environments, these tie downs resist corrosion from salt water and chlorine.

Able to withstand high temperatures, oil, and most chemicals, these tie downs are appropriate for harsh environments.

Made of a high-performance aramid, also known as Technora, this rope keeps its strength in high heat and resists chemicals and corrosion. The braided construction and hollow core make it easier to splice than other rope, so you can add a fitting or connect rope together.

Also known as Dyneema and comparable to Spectra, this rope is made of high-performance polyethylene that remains strong even when wet.

FDA compliant for direct food contact, these cord grips have a multi-piece design to wrap around cables in sanitary environments without removing connectors or rewiring.

Seal and cushion narrow spaces such as channels.

Meeting UL 94 V-0, these rods are flame retardant—use them to seal and cushion narrow spaces.

Made of FDA-listed materials, these sheets and strips are for use with food.

Filled with carbon black, these sheets won’t generate static charges and divert existing ones away from electronics. Use them as a conductor to protect components from static discharge.

Commonly used in electronics applications, these sheets transfer heat better than any other silicone we offer.

One layer of fiberglass cloth is inserted between two layers of silicone rubber to give these sheets and strips the strength to stand up to high stress and flex. Use them as flange gaskets and anywhere heavy compression would squeeze nonreinforced silicone rubber out of place.