About Rubber
More
About Plastic
More
About Stainless Steel
More
About Tool Steel
More
About Carbon Steel, Alloy Steel, Spring Steel, and Cast Iron
More
Hardened Bearing-Quality 440C Stainless Steel
- Yield Strength: Not Rated
- Hardness: Rockwell C60 (Very Hard)
- Heat Treatment: Hardened
- Specifications Met: SAE AMS5630
These balls are hardened for increased wear and abrasion resistance. 440C is one of the hardest types of stainless steel after heat treating. It's often used for bearings and valves. This material maintains its corrosion resistance in temperatures up to 800° F.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Dia. | Dia. Tolerance | Magnetic Properties | Pkg. Qty. | Pkg. | |
Mirror-Like | |||||
|---|---|---|---|---|---|
| 1" | -0.0005" to 0.0005" | Magnetic | 1 | 0000000 | 00000 |
Tight-Tolerance Hardened 440C Stainless Steel
With a diameter that’s held to a close tolerance, this material is hardened for increased wear and abrasion resistance. 440C is one of the hardest types of stainless steel after heat treating. This material maintains its corrosion resistance in temperatures up to 800° F.
Balls have a reflective, mirror-like appearance.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: Not Rated
- Hardness: Rockwell C60 (Very Hard)
- Heat Treatment: Hardened
- Specifications Met: SAE AMS5630
| Dia. | Dia. Tolerance | Magnetic Properties | Pkg. Qty. | Pkg. | |
Mirror-Like | |||||
|---|---|---|---|---|---|
| 1" | -0.0001" to 0.0001" | Magnetic | 1 | 0000000 | 000000 |
Impact-Resistant 440A Stainless Steel
440A stainless steel resists damage from impact and abrasion.
Balls are hollow. Use them in floats and ball valves. They maintain their corrosion resistance in temperatures up to 250° F.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: Not Rated
- Hardness: Rockwell C55 (Very Hard)
- Heat Treatment: Hardened
- Specifications Met: SAE AMS-QQ-S-763
| Dia. | Dia. Tolerance | Mechanical Finish | Magnetic Properties | Each | |
Mirror-Like | |||||
|---|---|---|---|---|---|
| 1" | -0.005" to 0.005" | Tumbled | Magnetic | 0000000 | 000000 |
Corrosion-Resistant 316 Stainless Steel
The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications. It maintains its corrosion resistance up to the maximum temperature.
Balls have a reflective, mirror-like finish.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: Not Rated
- Hardness:
Inch Sizes: Rockwell B90 (Medium)
Metric Sizes: Rockwell C25 (Hard) - Heat Treatment: Not Rated
- Heat Treatable: No
- Specifications Met: Not Rated
| Dia. | Dia. Tolerance | Mechanical Finish | Appearance | Max. Temp., °F | Pkg. Qty. | Pkg. | |
316 Stainless Steel | |||||||
|---|---|---|---|---|---|---|---|
Inch | |||||||
| 1" | -0.001" to 0.001" | Tumbled | Mirror-Like | 1500° | 1 | 00000000 | 000000 |
Tight-Tolerance Multipurpose 304 Stainless Steel
This material has tighter tolerances than standard 304 stainless steel. From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications. It maintains its corrosion resistance in temperatures up to 1500° F.
Balls have a reflective, mirror-like finish.
Steel that meets ASTM or SAE specifications complies with standards for materials.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: Not Rated
- Hardness: Rockwell C25 (Hard)
- Heat Treatable: No
| Dia. | Dia. Tolerance | Fabrication | Specifications Met | Pkg. Qty. | Pkg. | |
Mirror-Like | ||||||
|---|---|---|---|---|---|---|
| 1" | -0.0005" to 0.0005" | Cold Worked | ASTM A240, ISO 3290, SAE J405 | 1 | 0000000 | 000000 |
Hard Wear-Resistant 52100 Alloy Steel Balls
- Yield Strength: 295,000 psi
- Hardness: Rockwell C60 (Very Hard)
- Specifications Met: See table
Also known as chrome steel, 52100 is an extremely hard and wear-resistant material. These balls are often used in bearings.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Dia. | Dia. Tolerance | Heat Treatment | Pkg. Qty. | Pkg. | |
Mirror-Like | |||||
|---|---|---|---|---|---|
| 1" | -0.0001" to 0.0001" | Hardened | 5 | 0000000 | 000000 |
Low-Carbon Steel Balls
- Yield Strength: 44,000 psi
- Hardness: Rockwell C60 (Very Hard)
Low-carbon steel offers excellent weldability. It's widely used for parts that don’t require high strength, such as spacers.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Dia. | Dia. Tolerance | Heat Treatment | Mechanical Finish | Pkg. Qty. | Pkg. | |
Mirror-Like | ||||||
|---|---|---|---|---|---|---|
| 1" | -0.005" to 0.005" | Case Hardened | Tumbled | 10 | 00000000 | 00000 |
Ultra-Hard C2 Tungsten Carbide Balls
- Yield Strength: Not Rated
- Hardness: Rockwell C75 (Very Hard)
- Temper Rating: Not Rated
Tungsten carbide, sometimes called carbide, is harder than Corrosion-Resistant Tungsten with excellent wear resistance. Use it to machine long-lasting tools, such as end mills and inserts.
For technical drawings and 3-D models, click on a part number.
| Dia. | Dia. Tolerance | Mechanical Finish | Pkg. Qty. | Pkg. | |
| 1" | -0.0001" to 0.0001" | Polished | 1 | 0000000 | 000000 |
Hardened Shock-Resistant S2 Tool Steel
- Yield Strength: 290,000 psi
- Hardness: Rockwell C55 (Very Hard)
- Specifications Met: ASTM A681
This S2 tool steel has been hardened for excellent strength and impact resistance. It has a tough core that resists breaking under shock loads.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Dia. | Dia. Tolerance | Mechanical Finish | Pkg. Qty. | Pkg. | |
Mirror-Like | |||||
|---|---|---|---|---|---|
| 1" | -0.001" to 0.001" | Ground and Polished | 5 | 0000000 | 000000 |
Wear-Resistant Easy-to-Machine Delrin® Acetal Resin Balls
- Color: White
- Temperature Range: -20° to 180° F
- Tensile Strength: 10,000-11,000 psi (Good)
- Impact Strength: 1-1.5 ft.-lbs./in. (Poor)
- Hardness: Rockwell R120-R122 (Hard)
- For Use Outdoors: No
- Specifications Met: FDA Compliant 21 CFR 177.2480
Able to hold tight tolerances, these balls resist expanding when exposed to heat and moisture. They have a naturally slippery, wear-resistant surface. Use them for bearings and low-load rolling applications. Delrin® acetal resin is also known as acetal homopolymer.
For technical drawings and 3-D models, click on a part number.
| Dia. | Dia. Tolerance | Pkg. Qty. | Pkg. | |
Inch | ||||
|---|---|---|---|---|
| 1" | -0.001" to 0.001" | 10 | 0000000 | 000000 |
Wear-Resistant Nylon Balls
- Color: Off-White
- Temperature Range: Not Rated
- Tensile Strength: 11,200-12,300 psi (Good)
- Impact Strength: 0.6-1.4 ft.-lbs./in. (Poor)
- Hardness: Rockwell R108-R121 (Hard)
- For Use Outdoors: No
Use these nylon 6/6 balls as bearings and in sealing applications. They have a slippery surface that reduces wear caused by friction.
For technical drawings and 3-D models, click on a part number.
| Dia. | Dia. Tolerance | Pkg. Qty. | Pkg. | |
Inch | ||||
|---|---|---|---|---|
| 1 " | -0.001" to 0.001" | 5 | 0000000 | 00000 |
Polypropylene Balls
- Color: Semi-Clear White
- Max. Temperature:
Solid Balls: 180° F
Hollow Balls: 220° F - Tensile Strength: 2,900-5,070 psi (Poor)
- Impact Strength: 0.9 ft.-lbs./in. (Poor)
- Hardness: Rockwell R99 (Hard)
- For Use Outdoors: No
- Specifications Met: See table
Resistant to swelling when exposed to water, these balls are often used in laboratory applications.
Hollow balls float. Use them in tanks to slow evaporation and reduce heat loss.
For technical drawings and 3-D models, click on a part number.
Chemical-Resistant Slippery PTFE Balls
- Color: White
- Max. Temperature: 500° F
- Tensile Strength: See Table (Poor)
- Impact Strength: 3.5 ft.-lbs./in. (Good)
- Hardness: Durometer 50D-65D (Medium Soft)
- For Use Outdoors: Yes
Offering a nonstick, slippery surface, these PTFE balls are often used as bearings and in ball valves. They offer superior chemical resistance and perform well in extreme temperatures. These balls are also excellent electrical insulators.
For technical drawings and 3-D models, click on a part number.
| Dia. | Dia. Tolerance | Tensile Strength | Pkg.Qty. | Pkg. | |
| 1" | -0.002" to 0.002" | 2,000-3,480 psi | 1 | 0000000 | 00000 |
Scratch- and UV-Resistant Acrylic Balls
- Color: Clear
- Max. Temperature: See table
- Tensile Strength: See table
- Impact Strength: 0.040 ft.-lbs./in. (Poor)
- Hardness: See table
- For Use Outdoors: Yes
- Specifications Met: UL 94 HB
A lightweight alternative to glass balls, acrylic balls maintain clarity over time. They are scratch and UV resistant, so they stand up to outdoor use better than polycarbonate.
For technical drawings and 3-D models, click on a part number.
Clear Impact-Resistant Polycarbonate Balls
- Color: Clear
- Temperature Range: 0° to 240° F
- Tensile Strength: 8,900-9,500 psi (Good)
- Impact Strength: 12-18 ft.-lbs./in. (Excellent)
- Hardness: Rockwell R118 (Hard)
- For Use Outdoors: No
Offering excellent impact resistance across a wide temperature range, these polycarbonate balls are only half the weight of glass. This material is comparable to Lexan, Hyzod, Tuffak, and Makrolon.
For technical drawings and 3-D models, click on a part number.
| Dia. | Dia. Tolerance | Pkg. Qty. | Pkg. | |
| 1" | -0.001" to 0.001" | 1 | 0000000 | 000000 |
Abrasion-Resistant Polyurethane Rubber Balls
Use these polyurethane balls as seals in pumps and check valves or let them bounce inside of vibrating sifters for an effective screen cleaner. They are made of polyurethane, which combines the shock absorbing qualities of rubber with the strength of plastic.
For technical drawings and 3-D models, click on a part number.
Food Industry Abrasion-Resistant Natural Rubber Balls
FDA compliant for direct contact with food, these balls are often used to clean screens in vibrating sifters in food, beverage, and other sanitary environments. You can also use them as seals in pumps and check valves. All are made of natural rubber, which is also known as gum rubber and latex rubber.
For technical drawings and 3-D models, click on a part number.
- Color: White
- Temperature Range: 0° to 180° F
- Tensile Strength: 3,000 psi
- For Use Outdoors: No
| Dia. | Dia. Tolerance | Durometer | Specifications Met | Pkg. Qty. | Pkg. | |
| 1" | -0.115" to +0.125" | 45A (Medium Soft) | FDA Compliant 21 CFR 177.2600 | 10 | 00000000 | 000000 |
High-Strength Multipurpose Neoprene Rubber Balls
- Color: Black
- Temperature Range: 55A balls: 0° to 212° F; 70A balls: -15° to 200° F
- Tensile Strength: 55A balls: 2,000 psi; 70A balls: 3/16" dia. balls: 1,450 psi, all other sizes: 2,100 psi
- For Use Outdoors: Yes
Let these balls bounce inside of vibrating sifters for an effective screen cleaner or use them as seals in pumps and check valves. Neoprene is also called chloroprene. It offers good oil and abrasion resistance.
For technical drawings and 3-D models, click on a part number.
| Dia. | Dia. Tolerance | Durometer | Pkg. Qty. | Pkg. | |
| 1" | -0.115" to +0.125" | 55A (Medium) | 5 | 0000000 | 000000 |
Food Industry Multipurpose Neoprene Rubber Balls
- Color: White
- Temperature Range: 0° to 212° F
- Tensile Strength: 2,000 psi
- For Use Outdoors: Yes
Loosen fine particles from the grip of vibrating-sifter screens with the bounce of rubber balls. Also use them as seals in pumps and check valves. They’re made from FDA-listed materials for use with food and beverage. Neoprene is also known as chloroprene.
For technical drawings and 3-D models, click on a part number.
| Dia. | Dia. Tolerance | Durometer | Specifications Met | Pkg. Qty. | Pkg. | |
| 1" | -0.115" to +0.125" | 55A (Medium) | FDA Compliant 21 CFR 177.2600 | 10 | 00000000 | 000000 |
High-Temperature Silicone Rubber Balls
- Color: White (semi-clear)
- Temperature Range: 0° to 400° F
- Tensile Strength: 2,000 psi
- For Use Outdoors: No
Use these balls as seals in pumps and check valves, or let them bounce inside of vibrating sifters as an effective screen cleaner. Silicone, commonly called polysiloxane, offers good resistance to ozone and salt water.
For technical drawings and 3-D models, click on a part number.
| Dia. | Dia. Tolerance | Durometer | Specifications Met | Pkg. Qty. | Pkg. | |
| 1" | -0.115" to +0.125" | 35A (Soft) | FDA Compliant 21 CFR 177.2600 | 5 | 0000000 | 000000 |
Nonporous Alumina Ceramic Balls
- Color: White
- Max. Temperature: 2000° F
- Fabrication: Fired
- Porosity: 0%
- Compressive Strength: 300,000 psi
Seal out air and gas in high-temperature and high-wear applications. This ultrahard ceramic can also be used in applications that require superior strength.
For technical drawings and 3-D models, click on a part number.
| Dia. | Dia. Tolerance | Sphericity | Each | |
| 1" | -0.0010" to 0.0010" | 99.99% | 0000000 | 000000 |
High-Strength Fracture- and Wear-Resistant Zirconia Ceramic Balls
- Color: White
- Temperature Range: See table
- Fabrication: Sintered
- Porosity: See table
- Compressive Strength: See table
Often used instead of metal in bearings and rollers, these balls are ideal for applications where strength under heavy loads and wear resistance is needed. It's the addition of yttria that gives this zirconia more strength and lowers the chances of cracking from impact than standard zirconia, alumina, and silicon nitride ceramic. If cracks do occur, they will not spread, extending the life and reliability of the material. It also means this zirconia blend resists wearing down from rubbing against another part or abrasion from chemical slurries.
These balls do not withstand rapid temperature changes or high temperatures as well as other high-performance ceramics such as alumina and silicon nitride ceramic.
For technical drawings and 3-D models, click on a part number.
| Diameter | Diameter Tolerance | Minimum Temperature | Maximum Temperature | Compressive Strength, psi | Porosity | Pkg. Qty. | Pkg. | |
| 1" | -0.10000" to 0.10000" | Not Rated | 1000° F | 300,000 | Not Rated | 1 | 0000000 | 000000 |
Flange-Mount Ball Transfers
Steel balls are durable.
Ball transfers with an angled working orientation can be used to form stock stands.
For technical drawings and 3-D models, click on a part number.
Flange | Mounting Hole | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ball Dia. | Cap., lbs. | Ht. | Dia. | Working Orientation | Lg. | Wd. | No.of Mounting Holes | Dia. | Ctr.-to-Ctr. | Temperature Range, °F | Each | ||
Steel Ball | |||||||||||||
Black-Oxide Steel Housing | |||||||||||||
| D | 11/16" | 90 | 1" | 1" | Ball Up, Ball Down, Angle | 2 7/16" | 1 11/16" | 2 | 5/32" | 2" | Not Rated to 400° | 0000000 | 000000 |
Heavy Duty Flange-Mount Ball Transfers
Steel balls are durable.
Ball transfers with an angled working orientation can be used to form stock stands.
For technical drawings and 3-D models, click on a part number.
Flange | Mounting Hole | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ball Dia. | Cap., lbs. | Ht. | Dia. | Working Orientation | Lg. | Wd. | No.of Mounting Holes | Dia. | Ctr.-to-Ctr. | Each | ||
Steel Ball | ||||||||||||
Black-Oxide Steel Housing | ||||||||||||
| A | 1/2" | 100 | 7/8" | 1" | Ball Up, Ball Down, Angle | 1 7/8" | 1 1/4" | 2 | 5/32" | 1 3/8" | 0000000 | 000000 |
Press-Fit Ball Transfers
Drop-in design makes for easy installation.
Steel balls are durable. Acetal balls are abrasion resistant.
For technical drawings and 3-D models, click on a part number.
Wood Balls
For technical drawings and 3-D models, click on a part number.
| Dia. | Dia. Tolerance | Pkg. Qty. | Pkg. | |
Birch | ||||
|---|---|---|---|---|
| 1" | -0.031" to 0.031" | 25 | 0000000 | 000000 |