Electric Combination Tensioner/Sealers for Plastic Strapping
Capable of securing 15 polypropylene straps per minute, this mobile tensioner/sealer saves you time and energy. Manually pull strapping over the package and feed it into the strapping inlet. The tensioner/sealer tensions the strapping around the package, makes a sealless weld, and then feeds out strapping for the next package. Use with Plastic Strapping for Strapping Machines.
For Coil | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Strapping Wd. | Wd. | ID | Lg. | Wd. | Ht. | Voltage | Current, A | Frequency, Hz | Plug Type | Power Cord Lg., ft. | Caster Type | Each | |
| 3/8", 1/2" | 8" | 8" | 35" | 23" | 30" | 120V AC | 4.6 | 50/60 | Three Prong | 15 | Four Swivel Casters (Two with Brakes) | 000000 | 000000000 |
Battery-Powered Combination
Tensioner/Friction-Weld Sealers for Plastic Strapping
These tools use heat to secure strapping without crimping on a seal. They automatically apply tension, weld strapping onto itself, and cut off the excess strapping.
Note: To match with compatible strapping, choose items with the same strapping material, width, and thickness or material and strapping group number.
| For Strapping Group No. | For Strapping Wd. | For Strapping Thick. | For Use With | Voltage | No. of Batteries Included | Battery Charger Included | Each | |
| 10, 11, 12, 14 | 3/8", 1/2" | 0.019"-0.031" | Embossed Polypropylene Strapping, Smooth Polyester Strapping, Smooth Polypropylene Strapping | 18V DC | 1 | Yes | 0000000 | 000000000 |
| 11, 12, 13, 14, 15, 16 | 1/2", 5/8" | 0.019"-0.040" | Embossed Polypropylene Strapping, Smooth Polyester Strapping, Smooth Polypropylene Strapping | 18V DC | 1 | Yes | 0000000 | 00000000 |
| 16, 17 | 5/8", 3/4" | 0.031"-0.051" | Embossed Polypropylene Strapping, Smooth Polyester Strapping, Smooth Polypropylene Strapping | 18V DC | 1 | Yes | 0000000 | 00000000 |
| Chargers for 18V Batteries | 0000000 | Each | 000000 |
Manual Combination Tensioner/Crimp-Tight Sealers for Plastic Strapping
These tools do double duty, pulling plastic strapping tight and then fastening it with a seal (sold separately). They have multiple levers for tensioning and sealing.
Note: To match with compatible strapping, choose items with the same strapping material, width, and thickness or material and strapping group number.
High-Tension Tensioners for Plastic Strapping
These tensioners apply extreme tension on plastic strapping to hold it tight around packages. They hold the bottom strap and tension the top strap by winding it around a take-up wheel. They have a built-in cutter for removing excess strapping.
Note: To match with compatible strapping, choose items with the same strapping material, width, and thickness or material and strapping group number.
| For Strapping Group No. | For Strapping Wd. | For Strapping Thick. | For Use With | Features | Each | ||
| A | 11, 12, 13, 16, 17 | 1/2"-3/4" | 0.020"-0.035" | Embossed Polypropylene Strapping, Smooth Polypropylene Strapping | Built-In Cutter | 00000000 | 000000 |
| B | 11, 12, 13, 14, 15, 16, 17, 18, 19 | 1/2"-3/4" | 0.015"-0.050" | Embossed Polypropylene Strapping, Smooth Polyester Strapping, Bonded Polyester Strapping, Woven Polyester Strapping, Basket Weave Polyester Strapping, Smooth Polypropylene Strapping | Built-In Cutter | 000000000 | 000000 |
| C | 13, 15, 16, 17, 18, 19, 20 | 5/8"-1 1/4" | 0.025"-0.050" | Embossed Polypropylene Strapping, Smooth Polyester Strapping, Bonded Polyester Strapping, Woven Polyester Strapping, Basket Weave Polyester Strapping | Built-In Cutter | 00000000 | 000000 |
Tensioners for Plastic Strapping
Use these tensioners with buckles in low-tension applications to draw plastic strapping tight around packages.
Style A tensioner lets you tighten strapping while threading plastic or wire buckles. It has a built-in cutter for removing excess strapping. Style B tensioner uses leverage to pull strapping tight.
Note: To match with compatible strapping, choose items with the same strapping material, width, and thickness or material and strapping group number.
Sealers for Plastic Strapping
| For Strapping Group No. | For Seal Type | For Strapping Wd. | For Strapping Thick. | For Use With | Handle Lg. | Each | |
| 11 | Smooth | 1/2" | 0.010"-0.027" | Embossed Polypropylene Strapping | 13" | 00000000 | 000000 |
| 11 | Smooth | 1/2" | 0.010"-0.027" | Embossed Polypropylene Strapping | 17" | 00000000 | 00000 |
| 12 | Smooth | 1/2" | 0.015"-0.031" | Embossed Polypropylene Strapping | 17" | 00000000 | 000000 |
| 13 | Smooth | 5/8" | 0.010"-0.027" | Embossed Polypropylene Strapping | 17" | 00000000 | 00000 |
| 14 | Serrated | 1/2" | 0.015"-0.040" | Smooth Polyester Strapping | 17" | 00000000 | 000000 |
| 15, 16 | Serrated | 5/8" | 0.020"-0.050" | Smooth Polyester Strapping | 17" | 00000000 | 000000 |
| 17 | Serrated | 3/4" | 0.020"-0.050" | Smooth Polyester Strapping | 17" | 00000000 | 000000 |
| 17 | Smooth | 3/4" | 0.015"-0.040" | Embossed Polypropylene Strapping | 17" | 00000000 | 000000 |
Sealers for Metal Strapping
Also known as crimpers, these sealers secure seals (sold separately) onto metal strapping.
Sealers for open seals cut two notches on each side of the seal with one operation. Sealers for closed seals cut a single notch on each side of the seal with one operation. For best results, apply two notches per seal.
Note: To match with compatible strapping, choose items with the same strapping material, width, and thickness or material and strapping group number.
| For Strapping Group No. | For Strapping Wd. | For Strapping Thick. | For Use With | Each | ||
For Open Seals | ||||||
|---|---|---|---|---|---|---|
| A | 1 | 3/8" | 0.015"-0.025" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 0000000 |
| A | 2, 3 | 1/2" | 0.015"-0.023" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 000000 |
| A | 4, 5 | 5/8" | 0.015"-0.023" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 000000 |
| A | 6, 7 | 3/4" | 0.015"-0.023" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 000000 |
| B | 3 | 1/2" | 0.023"-0.031" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 000000 |
| B | 5 | 5/8" | 0.023"-0.031" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 000000 |
| B | 7, 8 | 3/4" | 0.023"-0.031" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 000000 |
| C | 8 | 3/4" | 0.025"-0.035" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 000000 |
| C | 9 | 1 1/4" | 0.025"-0.035" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 000000 |
For Closed Seals | ||||||
| A | 1 | 3/8" | 0.015"-0.025" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 000000000 | 000000 |
| A | 2, 3 | 1/2" | 0.015"-0.023" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 000000000 | 000000 |
| A | 4, 5 | 5/8" | 0.015"-0.023" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 000000000 | 000000 |
| A | 6, 7 | 3/4" | 0.015"-0.023" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 000000000 | 000000 |
| C | 8 | 3/4" | 0.025"-0.035" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 000000 |
| C | 9 | 1 1/4" | 0.025"-0.035" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 000000 |
Tensioners for Metal Strapping
Use these tensioners to draw metal strapping tight around packages. They have ratchet action for unlimited take-up. The tensioner holds the bottom strap while a feedwheel bites into the strap and tightens it.
Tensioners for open seals are for use on flat surfaces. Strapping is wrapped around the package and overlapped on top. Tensioners for closed seals are for use on irregular surfaces as well as rounded objects. Place the seal on one end and fold strapping back to form a hook, and then slide the other end of the strapping through the seal. Tensioners push against the seal as they tighten strapping.
Note: To match with compatible metal strapping, choose items with the same strapping material, width, and thickness or material and strapping group number.
Tensioners | Replacement Feedwheels | Replacement Ratchet Gears | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Strapping Group No. | For Strapping Wd. | For Strapping Thick. | For Use With | Each | Each | Each | ||||
For Open Seals | ||||||||||
| A | 1, 2, 3, 4, 5, 6, 7 | 3/8"-3/4" | 0.015"-0.023" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 0000000 | 00000000 | 000000 | 00000000 | 000000 |
| A | 8, 9 | 3/4"-1 1/4" | 0.025"-0.035" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
For Closed Seals | ||||||||||
| B | 1, 2, 3, 4, 5, 6, 7 | 3/8"-3/4" | 0.015"-0.031" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
| B | 5, 7, 8, 9 | 5/8"-1 1/4" | 0.023"-0.035" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
High-Tension Tensioners for Metal Strapping
These tensioners apply maximum tension to pull strapping more tightly around packages than standard tensioners for metal strapping. They work on irregular surfaces as well as rounded objects. Place the seal on one end and fold strapping back to form a hook, and then slide the other end of the strapping through the seal. Tensioners push against the seal as they tighten strapping, creating high tension without slip. Pull strapping tight manually before applying tension.
Note: To match with compatible strapping, choose items with the same strapping material, width, and thickness or material and strapping group number.
| Style | For Strapping Group No. | For Strapping Wd. | For Strapping Thick. | For Use With | Each | |
For Closed Seals | ||||||
|---|---|---|---|---|---|---|
| A | 5, 7, 8, 9 | 5/8"-1 1/4" | 0.023"-0.031" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 0000000 |
| B | 1, 2, 3, 4, 5, 6, 7, 21, 22 | 3/8"-3/4" | 0.015"-0.023" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 000000 |
Combination Tensioner/Sealers for Metal Strapping
These tools do double duty, pulling metal strapping tight and then fastening it, without the use of a separate seal. They create a joint by crimping interlocking notches into the strapping and cutting off the excess.
Note: To match with compatible strapping, choose items with the same strapping material, width, and thickness or material and strapping group number.
| For Strapping Group No. | For Strapping Wd. | For Strapping Thick. | For Use With | Each | |
| 2, 3 | 1/2" | 0.015"-0.025" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 000000000 |
| 4, 5 | 5/8" | 0.015"-0.025" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 00000000 |
| 6, 7 | 3/4" | 0.015"-0.025" | Low-Carbon Steel Strapping, High-Carbon Steel Strapping, 302 Stainless Steel Strapping | 00000000 | 00000000 |
Ratchet-Handle Installation Tools for Build-Your-Own
Low-Profile Band Clamps for Firm Hose
Use with banding and buckles to build your own low-profile band clamps. Tool has a ratchet-action handle to tighten the band.
Handle | ||||||
|---|---|---|---|---|---|---|
| For Band Wd. | Lg. | Material | Finish | Type | Each | |
| 1/4", 3/8" | 8" | Zinc-Plated Steel | Vinyl Coated | Ratchet | 000000 | 0000000 |
Vise-Mount Installation Tools for Build-Your-Own
Low-Profile Band Clamps for Firm Hose
Use with banding and buckles to build your own low-profile band clamps.
| For Band Wd. | Lg. | Pull Strength, psi | Material | Each | |
| 3/4", 1", 1 1/4" | 16 1/2" | 6,000 | Zinc-Plated Steel | 0000000 | 0000000 |
Wing-Handle Installation Tools for Extra-Strength
Low-Profile Band Clamps for Firm Hose
Use to install Extra-Strength Low-Profile Band Clamps for Firm Hose.
| For Band Wd. | Material | Handle Type | Each | |
| 1/4", 3/8", 1/2", 5/8", 3/4" | Zinc-Plated Steel | Wing | 0000000 | 0000000 |
Heavy Duty Installation Tools for Low-Profile Band Clamps for Firm Hose
With the most leverage of any of our installation tools, this tool has a ball handle that makes it easier to ratchet.
Use to tighten Low-Profile Band Clamps for Firm Hose, then break off the excess banding.
| For Band Wd. | Lg. | Ht. | Wd. | Material | Handle Type | Each | |
| 3/8", 5/8" | 11" | 4" | 4" | Steel | Ratchet | 0000000 | 0000000 |
Wing-Handle Installation Tools for Build-Your-Own
Low-Profile Band Clamps for Firm Hose
Tool comes with a built-in cutter and a tension wing handle, as well as a tension nut that can be used instead of the handle in confined spaces. Use with banding and buckles to build your own low-profile band clamps.
You can also use this tool to install our Extra-Strength Low-Profile Band Clamps for Firm Hose—just fit a cutting adapter (sold separately) over the tool. The press-cut adapter cuts the banding when you press down the handle. The screw-cut adapter cuts the banding when you turn a screw with the included ratchet handle.
Medium Duty Installation Tools for Low-Profile Band Clamps for Firm Hose
This tool is longer than the light duty tool for increased leverage.
Use to tighten Low-Profile Band Clamps for Firm Hose, then break off the excess banding.
| For Band Wd. | Lg. | Ht. | Wd. | Material | Handle Type | Each | |
| 3/8", 5/8" | 11" | 1 1/2" | 1 1/2" | Steel | Ratchet | 0000000 | 0000000 |
Light Duty Installation Tools for Low-Profile Band Clamps for Firm Hose
Use to tighten Low-Profile Band Clamps for Firm Hose, then break off the excess banding. Tool has a punch lever on each end.
| For Band Wd. | Lg. | Ht. | Wd. | Material | Handle Type | Each | |
| 3/8", 5/8" | 10" | 1" | 2" | Steel | Ratchet | 0000000 | 000000 |