Barrel Lifters | McMaster-Carr

Filter by

Drum Orientation

Drum Material

Drum Capacity

Sling Type

For Container Capacity

Weight Capacity

Drum Attachment Location

Container Material

Drum Diameter

Gripping Method

Material

Drum Style

Length

Hook Opening Width

Overall Weight Capacity

Diameter

Finish

RoHS

REACH

Overall Height

Height

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

Weight

Full Drum Weight Capacity

99 Products

Drum Lifters


Style A	Style B	Style C

Style D	Style E	Style F

Style G	Style H	Style J

Style K

Move and transport drums with the hook of a crane or a hoist.

Warning: Never use to lift people or items over people.

For Vertical Drum Orientation— With Pads


Style A	Style B	Style C

Lifters with pads grip the drum with equal pressure for a secure, even lift.

Style B—Style B automatically release the drum once it’s fully set down, so you don’t need to manually reset it.

Style C—Style C lifters have three arms that spread the load evenly to prevent deforming the drum. With the lowest height of all styles, they’re helpful in areas with limited headroom.

Stainless Steel—Stainless steel lifters are more corrosion resistant than steel lifters. Use them where they may be exposed to moisture or chemicals.

	For Drum						Overall					Bolt
Style	Cap., gal.	Dia.	Style	Material	Wt. Cap., lb.	Drum Attachment Location	Lg.	Ht.	Material	Color	Eye Dia.	Dia.	Lg.		Each
A	55	24"	Closed Head	Steel	1,000	Rim	24 1/2"	15"	Powder-Coated Steel	Orange	—	3/4"	2"	3695T113	0000000
A	85	28"	Closed Head	Steel	1,000	Rim	28 1/2"	15"	Powder-Coated Steel	Orange	—	3/4"	2"	36945T72	000000
B	55	22 1/2"	Closed Head, Open Head	Steel	1,000	Rim	32 1/2"	18 3/8"	Painted Steel	Blue	3"	—	—	3695T12	000000
C	30, 55	18" to 23"	Closed Head, Open Head	Plastic, Steel	1,000	Rim	24 1/4"	6"	Stainless Steel	—	1 3/8"	—	—	3695T114	000000
C	30, 55	19 1/2" to 24"	Closed Head, Open Head	Plastic, Steel	1,000	Rim	29 1/2"	5 1/2"	Powder-Coated Steel	Red	1 3/8"	—	—	3695T111	000000

For Vertical Drum Orientation— With Pads and Guide Handles

Style D

Lifters with pads grip the drum with equal pressure for a secure, even lift.

Style D—Style D lifters have guide handles to help you safely position the lifter and maintain control as you attach and lift.

Stainless Steel—Stainless steel lifters are more corrosion resistant than steel lifters. Use them where they may be exposed to moisture or chemicals.

	For Drum						Overall				Bolt
Style	Cap., gal.	Dia.	Style	Material	Wt. Cap., lb.	Drum Attachment Location	Lg.	Ht.	Material	Color	Dia.	Lg.		Each
D	30, 55	18" to 23"	Closed Head, Open Head	Plastic, Steel	1,000	Rim	28 1/2"	11 1/2"	Stainless Steel	—	5/8"	4"	3695T116	0000000
D	30, 55	18" to 26"	Closed Head, Open Head	Fiber, Plastic, Steel	1,000	Rim	31"	14"	Painted Steel	Blue	3/4"	1 1/2"	36945T73	000000

For Vertical Drum Orientation— With Clamps


Style E	Style F

Lifters with clamps have high-strength jaws that provide a vise-like grip on drum rims up to 1" deep without damaging them. The gripping action is unaffected by greasy and oily surfaces.

Style E—Style E have clamps with a dual-lever design and are connected by chain.

Style F—Style F lifters have a single arm that clamps onto one edge of the drum. Use them when access is limited to one side and a lifter that spans the entire drum won’t fit. These lifters also have a fork pocket with a divot, so drums can be lifted with a forklift, overhead chain, or hoist. A safety strap fastens them to the forklift carriage.

	For Drum						For Max. Fork		Overall					Eye
Style	Cap., gal.	Dia.	Style	Material	Wt. Cap., lb.	Drum Attachment Location	Wd.	Ht.	Lg.	Ht.	Forklift Attachment Type	Material	Color	Lg.	Wd.		Each
E	20, 30, 55	16" to 24"	Closed Head, Open Head	Steel	750	Rim	—	—	27"	16"	—	Painted Steel	Gray	5"	2 1/2"	3389T1	0000000
E	20, 30, 55	18" to 24"	Closed Head, Open Head	Steel	2,000	Rim	—	—	29 1/2"	20"	—	Painted Steel	Gray	4"	2 1/2"	3389T3	00000000
F	30, 55	—	Closed Head, Open Head	Steel	1,500	Rim	5 1/2"	2"	20 3/4"	22 15/16"	Hook and Strap	Powder-Coated Steel	Blue	—	—	3695T118	000000

For Vertical Drum Orientation— With Clamps and Locking Handle

Style G

Lifters with clamps have high-strength jaws that provide a vise-like grip on drum rims up to 1" deep without damaging them. The gripping action is unaffected by greasy and oily surfaces.

Style G—Style G lifters have a single arm that clamps onto one edge of the drum and a handle that locks it in place. Use them when access is limited to one side and a lifter that spans the entire drum won’t fit.

	For Drum					Overall
Style	Cap., gal.	Style	Material	Wt. Cap., lb.	Drum Attachment Location	Lg.	Ht.	Material	Color	Eye Dia.		Each
G	30, 55	Closed Head, Open Head	Steel	1,000	Rim	17 1/4"	29 7/8"	Powder-Coated Steel	Blue	1 1/4"	3695T117	0000000

For Vertical Drum Orientation— With Straps and Guide Handles

Style H

Style H—Style H lifters have a ratchet strap to hold the drum. Pockets at the top of the lifter allow you to use them with a forklift. A safety strap fastens them to the forklift carriage.

	For Drum							For Max. Fork		Overall
Style	Cap., gal.	Dia.	Max. Ht.	Style	Material	Wt. Cap., lb.	Drum Attachment Location	Wd.	Ht.	Lg.	Ht.	Forklift Attachment Type	Material	Color	Eye Dia.		Each
H	30, 55	24 5/8"	42"	Closed Head, Open Head	Fiber, Plastic, Steel	1,000	Base	6 1/2"	2"	28 1/2"	49 1/2"	Hook and Strap	Powder-Coated Steel	Yellow	5/8"	3389T5	0000000

For Vertical Drum Orientation— With Bands and Locking Pin

Style J

Style J—Style J lifters have a metal band that wraps around the entire drum just below the upper rim, evenly distributing weight to prevent deforming the drum. A locking pin secures the lifter in place, so there’s no need to reattach or readjust between lifts.

	For Drum						Overall
Style	Cap., gal.	Dia.	Style	Material	Wt. Cap., lb.	Drum Attachment Location	Lg.	Ht.	Material	Color	Eye Dia.		Each
J	55	24"	Closed Head	Steel	700	Rim	25 1/2"	12 1/2"	Powder-Coated Steel	Orange	1 3/8"	3695T112	0000000

For Horizontal Drum Orientation— With Pads and Locking Lever

Style K

Lifters with pads grip the drum with equal pressure for a secure, even lift.

Style K—Style K lifters have an extra-wide grip to lift drums horizontally. A locking lever holds the drum in place.

	For Drum						Overall				Eye
Style	Cap., gal.	Max. Ht.	Style	Material	Wt. Cap., lb.	Drum Attachment Location	Lg.	Ht.	Material	Color	Lg.	Wd.		Each
K	55	35"	Closed Head, Open Head	Fiber, Steel	1,000	Rim	41 1/4"	29 1/2"	Painted Steel	Yellow	3"	2"	3695T115	0000000

Drum Slings


Style A	Style B	Style C

Style D	Style E	Style F

Image of Specification. Front orientation. Contains Annotated. Near-Vertical Drum.

Lift heavy drums without risking injuries and chemical spills. These slings are cost-effective compared to drum lifters, but you may need an extra person to guide loads since drums can sway.

Vertical Lift


Style A	Style B	Style C

Move upright drums on and off pallets and trucks.

Steel Hooks—Your go-to for most jobs, the steel hooks lift drums by their rims.

Steel Clamps—Two spring-loaded clamps snap onto the drum rim and hold tight, so your drum won’t slip from jolts and sudden stops. Although they're more secure than hook grips, they can dent your drums.

Polyester Straps—Wrap around drums to move them without causing dents. These slings also lift damaged drums that hooks won’t grip tight.

		For Drum						Eye
	Style	Cap., gal.	Max. Dia.	Wt. Cap., lb.	Drum Attachment Location	Body Material	Hook Opening Wd.	Lg.	Wd.	Specs. Met		Each
Steel Hooks



		A	20, 30, 55	24"	1,000	Rim	Nylon Fabric	1 1/8"	—	—	—	8843T49	0000000


		Steel Clamps



				B	30, 55	25"	2,000	Rim	Steel	1"	3 1/2"	2 1/2"	ASME B30.26	3389T6	000000


				Polyester Straps



						C	55	24"	850	Body	Polyester Fabric	—	—	—	ASME B30.9	8843T41	00000

Horizontal Lift


Style A	Style D

Load and unload drums onto stackable drum racks, drum dispensing stands, and drum mixers.

Steel Hooks—Your go-to for most jobs, the steel hooks lift drums by their rims.

Aluminum-Bronze Hooks—Prevent sparks when hooks scrape against metal drums in locations with combustible vapors or residues. With 304 stainless steel legs, they won’t rust in damp and humid locations.

Iron Hooks—These hooks are reliable for most applications but are less corrosion-resistant than steel.

		For Drum							Eye
	Style	Cap., gal.	Max. Ht.	Wt. Cap., lb.	Drum Attachment Location	Body Material	Bar Dia.	Hook Opening Wd.	Lg.	Wd.	Specs. Met		Each
Steel Hooks



		A	20, 30, 55	36"	1,000	Rim	Nylon Fabric	—	1 1/8"	—	—	—	8843T52	0000000


		Aluminum-Bronze Hooks



				D	55	36"	1,000	Rim	304 Stainless Steel	1/2"	3/4"	3"	2 3/4"	—	3401T6	000000


				Iron Hooks



						D	30, 55	36"	1,000	Rim	Steel	1/2"	2 1/8"	4"	4 1/2"	ASME B30.26	3401T8	00000

Horizontal and Near Vertical Lift


Style E	Style F

Load and unload drums onto stackable drum racks, drum dispensing stands, and drum mixers.

Lift drums at a slight tilt and lower them one edge at a time for smooth vertical and horizontal stacking. They also position drums at the optimal angle to drain contents. Use the end ring for near-vertical lifts, and switch to the center ring for horizontal handling.

Steel Hooks—Your go-to for most jobs, the steel hooks lift drums by their rims.

		For Drum
	Style	Cap., gal.	Max. Ht.	Wt. Cap., lb.	Drum Attachment Location	Body Material	Bar Dia.	Hook Opening Wd.	Eye Dia.	Specs. Met		Each
Steel Hooks



		E	55	38"	1,100	Rim	Steel	—	13/16"	2 1/2", 3 1/2"	—	3615T14	0000000


		F	55, 85	41"	2,000	Rim	Steel	5/8"	1 1/4"	3"	ASME B30.9	3615T21	000000

Side-Grip Fork-Mount Drum Grabbers


Style A	Style B

Style C	Style D

Style E

Convert a forklift to lift and transport drums. The arms on these drum grabbers automatically close and lock around the side of a drum when lifted with a forklift and release when the drum is set down. Locking screws clamp down on the forks to secure the grabbers to your forklift.

Warning: Never use to lift people or items over people.

Style A—Style A are for use with plastic drums.

Style C—Style C have a single locking screw for faster tightening.

Style D—Style D have rubber-lined gripping arms that provide a nonslip contact surface to better grip drums.

Style E—Style E hold two drums.

			For Container					For Max. Fork
	Style	For Max. No. of Containers	Material	Cap., gal.	Dia.	Overall Wt. Cap., lb.	Wt. Cap. per Drum, lb.	Wd.	Ht.	Fork Pocket Spacing Ctr.-to-Ctr.	For Min. Rim Dp.		Each
Steel Body



		A	1	Plastic	30, 55	18" to 22 1/2"	1,000	—	5 3/8"	1 1/2"	19 3/4" to 23 5/8"	3/16"	36755T2	0000000


		B	1	Steel	30, 55	18", 22"	1,500	—	5 1/2"	2"	22"	—	3421T17	000000
		B	1	Steel	55	22"	1,500	—	5 1/2"	2"	22"	—	3421T14	000000
		C	1	Steel	15, 30, 55	13", 17 1/4", 22 1/2"	1,500	—	22 1/2"	3 1/2"	22 1/2"	—	3421T21	00000000
		D	1	Steel	30, 55, 85	18" to 28"	1,500	—	5 5/8"	1 5/8"	21 3/4" to 30"	—	3421T22	00000000
		E	2	Steel	55	22"	—	1,500	7"	2 1/4"	25 5/8"	—	3421T16	00000000

Tilting Drum Lifters


Style A	Style B

Style C	Style D

Raise, transport, tilt, and drain full drums using the hook of a crane or hoist. A lock on each side of the frame keeps the drum vertical or horizontal during transport.

Drum adapters fit inside the saddle to hold 30-gallon drums.

Tilt brakes hold your drum in place if chain is released.

Fork pockets allow these lifters to be moved with a forklift.

Bracket kits for fiber and plastic drums bolt onto the side of the drum saddle and clamp to the top and bottom of the drum. They give the lifter enough stability to be used with rimless plastic and fiber drums.

Note: In half-full drums contents shift, which reduces capacity.

Warning: Never use to lift people or items over people.

Chain Grip—Lifters with chain have a ratchet tightener to secure the drum.

Pad Grip—Lifters with pads have adjustment screws to secure the drum.

	Lifters													30-Gal. Drum Adapters		Tilt Brakes		Fork Pockets				Bracket Kits for Fiber and Plastic Drums
		For Drum			Drum Wt. Cap., lb.					Lifting Eye								For Max. Fork
	Style	Cap., gal.	Dia.	Material	Full	Half-Full	Tilt Mechanism	Movement	Material	Lg.	Wd.		Each		Each		Each	Wd.	Ht.		Each		Each
Chain Grip



		A	55	21" to 23"	Fiber, Steel	800	500	Hand	360° Swivel	Painted Steel	2 3/8"	2"	3669T3	0000000	———	0	———	0	4 3/4"	2 1/2"	9575N111	0000000	9575N113	0000000


		A	55	22 1/2" to 23"	Fiber, Steel	800	500	Hand	360° Swivel	Painted Steel	2 3/8"	2"	3669T18	000000	3407T52	0000000	———	0	4 3/4"	2 1/2"	9575N111	000000	9575N113	000000
		B	55	22 1/2"	Steel	1,500	800	Chain Hand Wheel	360° Swivel	Painted Steel	2 3/8"	2"	3666T16	00000000	3407T52	000000	3669T15	0000000	4 3/4"	2 1/2"	9575N111	000000	9575N113	000000
		B	55	22 1/2"	Steel	2,000	1,000	Chain Hand Wheel	360° Swivel	Painted Steel	2 3/8"	3"	3666T42	00000000	———	0	———	0	4 3/4"	2 1/2"	9575N112	000000	———	0
		B	55	22" to 23 1/2"	Fiber, Steel	800	500	Chain Hand Wheel	360° Swivel	Painted Steel	2 3/8"	2"	3666T13	00000000	3407T52	000000	3669T15	000000	4 3/4"	2 1/2"	9575N111	000000	9575N113	000000
		C	55	22" to 23 1/2"	Plastic, Steel	1,500	800	Chain Hand Wheel	360° Swivel	Painted Steel	2 3/8"	2"	3666T43	00000000	3407T52	000000	3669T15	000000	4 3/4"	2 1/2"	9575N111	000000	———	0


		Pad Grip



				D	20, 30, 55	15" to 23"	Fiber, Steel	500	250	Chain Hand Wheel	360° Swivel	Painted Steel	2 3/8"	2"	3666T44	00000000	———	0	3669T15	000000	4 3/4"	2 1/2"	9575N111	000000	———	0

Drum Upenders


Drum Plug Wrench	Twist Prongs

Gain the extra leverage needed to lift heavy drums from horizontal to upright without straining your back. These upenders help you maneuver drums into the right spot for storage or get them onto a pallet. Use the two end prongs to twist the drum into your preferred position. A drum plug wrench on the back eliminates the need for a second tool.

			Overall
	For Drum Material	Overall Wt. Cap., lb.	Lg.	Wd.	Color	Features		Each
Powder-Coated Steel



		Fiber, Plastic, Steel	600	41"	5 7/8"	Blue	Drum Plug Wrench, Twist Prongs	9931N11	000000

Tilting Pail Lifters

Hook these lifters to a crane or hoist to pick up 5-gallon pails and pour out their contents. A hand wheel rotates the pail 360° in either direction, so you can easily dump adhesives, paint, or chemicals into containers without spilling or splashing. You can lock the wheel at any angle—in 45° increments—to control the flow of material. A bracket fits over the top of the pail to keep it from falling when it’s upended. These lifters also have a ratcheting strap to secure the center of the pail.

These lifters work with straight- or tapered-wall pails. Measure diameter at the pail’s midpoint.

Warning: Never use to lift people or items over people.

For Pail							Lifting Eye
Cap., gal.	Dia.	Material	Wt. Cap., lb.	Tilt Mechanism	Movement	Material	Lg.	Wd.	Features	Specs. Met		Each
5	11" to 12"	Steel, Plastic	200	Hand	360° Swivel	Powder-Coated Steel	2 1/4"	1 1/2"	Locking Pin, Top Bracket	ASME B30.20	9957N101	0000000

Manual Drum Lift Trucks

Lift, transport, and place drums without a forklift. Roll these trucks right to the edge of your pallet or platform to load and unload drums. Back swivel casters make them simple to steer.

V-Style Base—Gas-Spring Pump Handle

Trucks with a gas-spring pump handle raise your drum as you pump down the handle. The leverage of the handle and the power of the gas spring alleviate the weight of the load. Built to prevent tipping, a ratchet mechanism keeps your movements controlled. Three hooks securely hold the drum below the rim.

Polypropylene Wheel—Polypropylene wheels are lightweight and work on smooth surfaces.

	For Container					Overall
	Material	Cap., gal.	Dia.	Ht.	Overall Wt. Cap., lb.	Lg.	Wd.	Ht.	Body Color	Handle Ht.	Max. Lift	Brake Type	Holding Mechanism	Wheel Type		Each
Painted Steel Body with Polypropylene Wheels



		Fiber Plastic Steel	55	22" to 23 1/2"	34" to 36"	800	43"	49"	47"	Blue	21" to 74 1/2"	6 1/2"	Without Brake	Rim Catch	Solid	22375T61	000000000

V-Style Base—Hydraulic Pump Handle

Trucks with a hydraulic pump require less manual effort to lift and position heavy drums than lift trucks with a gas-spring pump handle. Control up and down movement by activating either a hand or foot lever. A claw-style gripper attaches at one point on the rim of your drum—similar to an electric can opener latching onto a can.

Polypropylene Wheel—Polypropylene wheels are lightweight and work on smooth surfaces.

Phenolic Wheel—Phenolic wheels are nonmarking and roll best on smooth surfaces.

	For Container					Overall
	Material	Cap., gal.	Dia.	Ht.	Overall Wt. Cap., lb.	Lg.	Wd.	Ht.	Body Color	Handle Ht.	Max. Lift	Brake Type	Holding Mechanism	Wheel Type		Each
Painted Steel Body with Front Polypropylene Wheels and Back Phenolic Wheels



		Steel	30, 55, 85	18" to 26"	26 1/4" to 32 1/4"	800	35"	49 7/8"	61 3/4"	Green	45"	20 1/2"	Wheel Brake	Rim Catch	Solid	22375T4	000000000

V-Style Base—Hydraulic Foot Pump

Phenolic Wheel—Phenolic wheels are nonmarking and roll best on smooth surfaces.

650 lb. Capacity with Retracted Legs—Trucks with retractable legs collapse into a smaller footprint for transportation across tight facilities. Extend the legs before lifting.

	For Container						Overall								Wheel
	Material	Cap., gal.	Dia.	Ht.	Overall Wt. Cap., lb.	Cap. with Retracted Legs, lb.	Lg.	Wd.	Ht.	Body Color	Handle Ht.	Max. Lift	Brake Type	Holding Mechanism	Dia.	Type		Each
Painted Steel Body with Phenolic Wheels



		Fiber Plastic Steel	30, 55, 85	18" to 26"	25 1/2" to 40"	1,100	650	36"	36 1/4" to 41"	48 1/4" to 79 1/2"	Orange	41 1/2"	20"	Floor Lock	Rim Catch	5"	Solid	22375T5	000000000

Counterbalanced Base—Hydraulic Pump Handle

Trucks with a counterbalanced base have no front legs, so you can roll them right next to tight cabinets or shelving structures to load or unload your drum.

Polyurethane Plastic Wheel—Polyurethane wheels are nonmarking, abrasion resistant, and shock absorbent.

	For Container					Overall
	Material	Cap., gal.	Dia.	Ht.	Overall Wt. Cap., lb.	Lg.	Wd.	Ht.	Body Color	Handle Ht.	Max. Lift	Brake Type	Holding Mechanism	Wheel Type		Each
Powder-Coated Steel Body with Polyurethane Plastic Wheels



		Plastic Steel	30, 55, 85	18" to 27"	29" to 45"	700	58"	26"	58"	Black, Yellow	49"	20"	Wheel Brake	Rim Catch	Solid	22375T121	000000000

Manual Fork-Mount Drum Dispensers

These dispensers mount to the forks of a forklift for lifting and transport, plus they pivot for manual tilting so dispensing is easy. The band clamps around the drum and is secured with a latch.

Warning: Never use to lift people or items over people.

	For Container				For Max. Fork
	Material	Cap., gal.	Dia.	Overall Wt. Cap., lb.	Wd.	Ht.	Fork Pocket Spacing Ctr.-to-Ctr.		Each
Steel Body



		Steel	30	18" to 18 1/2"	1,000	5"	3"	26"	3419T32	0000000


		Steel	55	22" to 22 1/2"	1,000	5"	3"	30"	3419T21	000000

Top-Grip Fork-Mount Drum Grabbers


For Maximum of 1 Container	For Maximum of 2 Containers

The jaws automatically grip the top of the drum when lifted with a forklift—great for areas with limited side clearance. The jaws release when the drum is set down. Grabbers have locking screws that clamp down on the forks to secure the grabbers to your forklift. Use with closed- and open-head drums.

Warning: Never use to lift people or items over people.

Protectors—Drum grabber protectors (sold separately) bolt to the base of the grabber to cushion and protect the drum from wear (mounting hardware included). Drum grabbers for two containers require two protectors.

	Drum Grabbers											Protectors		Replacement Grips
		For Container					For Max. Fork
	For Max. No. of Containers	Material	Cap., gal.	Dia.	Overall Wt. Cap., lb.	Wt. Cap. per Drum, lb.	Wd.	Ht.	Fork Pocket Spacing Ctr.-to-Ctr.		Each		Each		Each
Steel Body



		1	Fiber, Plastic, Steel	30, 55, 85	18" to 26"	1,000	—	5 1/2"	2"	22"	3399T11	000000000	———	0	3399T77	0000000


		1	Fiber, Plastic, Steel	30, 55, 85	18" to 26"	1,600	—	7"	2 1/4"	20 3/8"	3399T7	00000000	3399T9	0000000	3399T77	000000
		2	Fiber, Plastic, Steel	30, 55, 85	18" to 26"	—	1,000	7"	2 1/4"	25 5/8"	3399T12	00000000	———	0	3399T77	000000
		2	Fiber, Plastic, Steel	30, 55, 85	18" to 26"	—	1,600	7"	2 1/4"	20 3/8"	3399T8	00000000	3399T9	000000	3399T77	000000

Weighing and Counting Drum Dolly Scales

To quickly check inventory, roll these dollies wherever you need them to weigh and count the contents of drums. Their built-in scale measures weight and has an accurate piece-count mode—even while adding or removing contents from your drum. Dollies have three sensors for reliable readings on uneven floors. For loading heavy drums, they have a low-profile platform. The scale has a rechargeable battery with a USB charging cable.

					Platform				Overall				Batteries		Wheel
	For Container Cap., gal.	Wt. Cap.	Accuracy	Graduations	Dp.	Shape	Dia.	Material	Ht.	Wd.	Dp.	Housing Material	Included	No. Req.	Configuration	Material	No. of	No. of Brakes		Each
Pounds, Kilograms



		55	1,000 lb. (450 kg)	±0.2 lb. (±0.1 kg)	0.2 lb. (0.1 kg)	24"	Round	24"	Steel	50"	31"	43"	Powder-Coated Steel	Yes	1	Two Axle-Mounted Wheels and One Swivel Caster	Plastic	3	1	3503N11	000000000

Hydraulic Drum Handlers


Style A	Style B

Style C

A hydraulic lift raises the drum to the required height, and a manual tilt mechanism positions the drum at the proper angle for emptying. Handlers can rotate the drums 360° in either direction. A drum saddle with a chain and ratchet-style tightener secures the drum, and a floor lock keeps these handlers stationary.

Drum adapters fit inside the saddle to hold 30-gallon drums.

Bracket kits for fiber and plastic drums bolt onto the side of the drum saddle and clamp to the top and bottom. They give the handler enough stability to be used with rimless plastic and fiber drums.

Note: In half-full drums contents shift, which reduces capacity.

Warning: Never use to lift people or items over people.

Hand-Crank Tilt Mechanism—Handlers with a hand-crank tilt mechanism are best for dispensing at lower heights.

Chain-Hand-Wheel Tilt Mechanism—Handles with a chain-hand-wheel tilt mechanism are easier to use at higher dispensing heights.

Styles A and B—Styles A and B have a hand-operated hydraulic lift to position the drum at the required height. They require minimal assembly.

Style C—Style C have an electric hydraulic lift that raises the drum with the push of a button and positions the drum at the required height.

	Handlers																				30-Gal. Drum Adapters		Bracket Kits for Fiber and Plastic Drums
		For Container			Overall Wt. Cap., lb.			Base Leg		Overall				Front Wheel		Back Wheel
	Style	Material	Cap., gal.	Dia.	Full Drum	Half-Full Drum	Dispensing Ht.	Inside Spread	Outside Spread	Wd.	Ht.	Retracted Ht.	Body Color	Dia.	Material	Dia.	Material	Wheel Type		Each		Each		Each
Painted Steel Body







				Hand-Crank Tilt Mechanism

				A	Steel	55	22 1/2"	800	500	60"	37"	44"	44"	96"	55"	Blue	8"	Polypropylene	4"	Polyethylene	Solid	3692T12	000000000	3407T52	0000000	9575N113	0000000




						Chain-Hand-Wheel Tilt Mechanism

						B	Steel	55	22 1/2"	800	500	72"	37"	44"	44"	96"	55"	Blue	8"	Polypropylene	4"	Polyethylene	Solid	3692T13	00000000	3407T52	000000	9575N113	000000


						C	Steel	55	22 1/2"	800	500	72"	37"	44"	44"	96"	55"	Blue	8"	Polypropylene	4"	Polypropylene	Solid	3692T15	00000000	3407T52	000000	9575N113	000000

Pull-Chain Fork-Mount Drum Dispensers

Style A

Style B

Slide these dispensers onto the forks of a forklift to raise a drum, then use the hand chain to tilt and drain it from up to 10 feet away. Drums can rotate 360° in either direction. Chains or straps with ratchet-style tighteners secure the drums. Note: In half-full drums contents shift, which reduces capacity.

Drum adapters fit inside the saddle to hold 30-gallon drums.

Tilt brakes prevent the drum from tilting when not in use.

Bracket kits for fiber and plastic drums retrofit Style A dispensers to have the same capabilities as Style B dispensers. They bolt onto the side of the drum saddle and clamp to the top and bottom of the drum to give the dispenser enough stability to be used with rimless plastic and fiber drums.

Warning: Never use to lift people or items over people.

Style B—Style B dispensers have a built-in bracket assembly that grips the drum from the top and bottom, allowing them to lift rimless fiber, plastic, or steel drums.

	Dispensers													30-Gal. Drum Adapters		Drum Lifter Tilt Brakes		Bracket Kits for Fiber and Plastic Drums
		For Container			Overall Wt. Cap., lb.		For Max. Fork
	Style	Material	Cap., gal.	Dia.	Full Drum	Half-Full Drum	Wd.	Ht.	Fork Pocket Spacing Ctr.-to-Ctr.	Tilt Mechanism	Holding Mechanism (No. of)		Each		Each		Each		Each
Steel Body



		A	Fiber, Steel	55	22" to 23 1/2"	800	500	6 1/2"	2 1/2"	31"	Chain Hand Wheel	Chain (1)	3407T91	000000000	3407T52	0000000	3669T15	0000000	9575N113	0000000


		A	Steel	55	22" to 23 1/2"	1,500	800	6 1/2"	2 1/2"	31"	Chain Hand Wheel	Chain (1)	3407T16	00000000	3407T52	000000	3669T15	000000	9575N113	000000
		A	Steel	55	22 1/2"	2,000	1,000	6 1/2"	2 1/2"	31"	Chain Hand Wheel	Strap (2)	3407T21	00000000	3407T52	000000	———	0	———	0
		B	Fiber, Plastic, Steel	55	22" to 23 1/2"	1,500	800	6 1/2"	2 1/2"	31"	Chain Hand Wheel	Chain (1)	3407T19	00000000	3407T52	000000	3669T15	000000	———	0

Drum Trucks


Style A	Style B	Style C	Style D

These two-wheeled trucks are good for moving drums short distances. Trucks cradle the drum during transport. They have load wedges that slide under the drum for lifting.

Style A

Style A and B trucks have a kickstand to keep them upright when not in use.

Rim Catch—Trucks with a rim catch clamp to the top of the drum to secure it.

Polypropylene Wheel—Polypropylene wheels are lightweight and work on smooth surfaces.

	For Container					O'all		Wheel
	Material	Cap., gal.	Dia.	Ht.	Overall Wt. Cap., lb.	Wd.	Ht.	Dia.	Material	Type	Features		Each
Orange Painted Steel







				Adjustable Rim Catch Holding Mechanism

				Steel	30, 55	18" to 24"	30" to 42"	1,000	25 1/2"	59"	10"	Polypropylene	Solid	Handle Grips, Kickstand	2776T91	0000000

Style B

Style A and B trucks have a kickstand to keep them upright when not in use.

Rim Catch—Trucks with a rim catch clamp to the top of the drum to secure it.

Polypropylene Wheel—Polypropylene wheels are lightweight and work on smooth surfaces.

Rubber Wheel—Rubber tread-on-core wheels have a hard core for strength surrounded by a shock- and sound-absorbing tread for a cushioned ride on all surfaces.

Spring-Loaded Axle—Spring-loaded axles make it easier to tilt the trucks and get them rolling.

	For Container					O'all		Wheel
	Material	Cap., gal.	Dia.	Ht.	Overall Wt. Cap., lb.	Wd.	Ht.	Dia.	Material	Type	Features		Each
Orange Painted Steel







				Adjustable Rim Catch Holding Mechanism

				Steel	30, 55, 85	17" to 23"	20" to 41"	1,000	23 3/4"	61"	10"	Polypropylene	Solid	Handle Grips, Kickstand, Spring-Loaded Axle	2311T13	0000000


				Steel	30, 55, 85	17" to 23"	20" to 41"	1,000	23 3/4"	61"	10"	Rubber	Tread on Core	Handle Grips, Kickstand, Spring-Loaded Axle	2311T14	000000

Replacement Wheels

Style C

Style C trucks have load rollers for easy loading and unloading of drums from pallets.

Rim Catch—Trucks with a rim catch clamp to the top of the drum to secure it.

Polypropylene Wheel—Polypropylene wheels are lightweight and work on smooth surfaces.

Rubber Wheel—Rubber tread-on-core wheels have a hard core for strength surrounded by a shock- and sound-absorbing tread for a cushioned ride on all surfaces.

Steel Wheel—Steel wheels are rugged but noisy and can damage floors. They roll best on smooth surfaces.

	For Container					O'all		Wheel
	Material	Cap., gal.	Dia.	Ht.	Overall Wt. Cap., lb.	Wd.	Ht.	Dia.	Material	Type	Features		Each
Orange Painted Steel







				Adjustable Rim Catch Holding Mechanism

				Fiber, Steel	30, 55, 85	18" to 34"	25" to 48"	1,000	24 1/2"	59"	10"	Polypropylene	Solid	Load Rollers	2865T2	0000000


				Fiber, Steel	30, 55, 85	18" to 34"	25" to 48"	1,000	24 1/2"	59"	10"	Rubber	Tread on Core	Load Rollers	2865T4	000000
				Fiber, Steel	30, 55, 85	18" to 34"	25" to 48"	1,000	24 1/2"	59"	10"	Steel	Solid	Load Rollers	2865T3	000000

Style D

Style D trucks have a strap with spring-loaded cinching buckle to secure drums. They stand upright on their own.

Rubber Wheel—Rubber tread-on-core wheels have a hard core for strength surrounded by a shock- and sound-absorbing tread for a cushioned ride on all surfaces.

Spring-Loaded Axle—Spring-loaded axles make it easier to tilt the trucks and get them rolling.

	For Container					O'all		Wheel
	Material	Cap., gal.	Dia.	Ht.	Overall Wt. Cap., lb.	Wd.	Ht.	Dia.	Material	Type	Features		Each
Orange Painted Steel







				Strap and Buckle Holding Mechanism

				Fiber, Plastic, Steel	30, 55	18" to 24"	28 1/2" to 50"	1,000	23 1/2"	59 1/2"	10"	Rubber	Tread on Core	Handle Grips, Spring-Loaded Axle	23615T3	0000000


				Fiber, Plastic, Steel	30, 55, 85	18" to 34"	28 1/2" to 50"	1,000	23 1/2"	59 1/2"	10"	Rubber	Tread on Core	Handle Grips, Spring-Loaded Axle	23615T4	000000

Replacements for Drum Trucks

Steel Drum Dispensing Trucks


Shown in Dispensing Position	Style A	Style B

Because these trucks tilt and roll like a hand truck they are easier to move than mobile drum dispensing stands. They are suited for long distance moves. Tilt them flat to dispense. Handle grips make the handles more comfortable.

Style A

Style A have a hook-style grabber that attaches to the rim of the drum for a secure hold and wedges that slide under the drum for easy loading. When in the dispensing position, rollers on the frame allow you to rotate the drum for mixing. For use with steel drums.

Polypropylene Wheel—Use trucks with polypropylene wheels on smooth surfaces.

Rubber Wheel—Trucks with rubber wheels absorb shock to roll over smooth or rough surfaces.

Steel Wheel—Trucks with steel wheels are rugged, but noisy and can damage floors. They work best on smooth surfaces.

	For Container						O'all		Wheel
	Material	Cap., gal.	Dia.	Ht.	Overall Wt. Cap., lb.	Dispensing Ht.	Wd.	Ht.	Front Dia.	Front Material	Front Type	Rear Dia.	Rear Material	Rear Type	Features		Each
Orange Painted Steel







				Fixed Rim Catch Holding Mechanism

				Steel	55, 85	18" to 26"	30" to 40"	1,000	14"	25"	62"	10"	Polypropylene	Solid	6"	Polypropylene	Solid	Frame Rollers, Handle Grips	2493T13	0000000


				Steel	55, 85	18" to 26"	30" to 40"	1,000	14"	25"	62"	10"	Rubber	Tread on Core	6"	Rubber	Tread on Core	Frame Rollers, Handle Grips	2493T11	000000
				Steel	55, 85	18" to 26"	30" to 40"	1,000	14"	25"	62"	10"	Steel	Solid	6"	Steel	Solid	Frame Rollers, Handle Grips	2493T12	000000

Style B


	Kickstand

Style B has a polyester strap with spring-loaded cinching buckle to secure the drum, extra-wide load wedges for easy loading, and a kickstand to keep the truck standing. They can be used with fiber, plastic, and steel drums.

Rubber Wheel—Trucks with rubber wheels absorb shock to roll over smooth or rough surfaces.

	For Container						O'all		Wheel
	Material	Cap., gal.	Dia.	Ht.	Overall Wt. Cap., lb.	Dispensing Ht.	Wd.	Ht.	Front Dia.	Front Material	Front Type	Rear Dia.	Rear Material	Rear Type	Features		Each
Orange Painted Steel







				Strap and Buckle Holding Mechanism

				Fiber, Plastic, Steel	30, 55	17" to 23"	34" to 38"	1,000	15"	23 3/4"	58"	10"	Rubber	Tread on Core	6"	Rubber	Tread on Core	Handle Grips, Kickstand	23615T5	0000000


				Fiber, Plastic, Steel	30, 55, 85	19" to 28"	33" to 40"	1,000	16 1/2"	24"	57 1/2"	10"	Polyolefin	Tread on Core	6"	Polyolefin	—	Frame Rollers, Handle Grips, Kickstand	23615T111	000000

Replacements for Drum Trucks

Hydraulic Drum Handlers with Chute

With the push of a button, the electric hydraulic lift raises the drum and a chute controls the flow of the material being dispensed to prevent splashes and spills. A clamp on each side of the chute secures the drum. Handlers have a handheld pendant switch and operate only when the push-buttons are engaged. A limit switch turns off the motor when the drum reaches the maximum height. Load will not drop in the event of a power failure. Screw-down floor locks keep handlers stationary during operation.

Warning: Never use to lift people or items over people.

	For Container							Overall							Wheel
	Material	Cap., gal.	Dia.	Ht.	Overall Wt. Cap., lb.	Tilt Mechanism	Dispensing Ht.	Lg.	Wd.	Ht.	Body Color	Brake Type	Holding Mechanism	Voltage, V AC	Dia.	Type		Each
Painted Steel Body with Phenolic Wheels



		Fiber Plastic Steel	30, 55	19" to 24"	28" to 35"	1,000	Push Button	60"	80"	36"	137 1/4"	Blue	Floor Lock	Rim Catch	120	8"	Solid	8911T55	000000000

Spill-Control Drum Dispensing Trucks


Shown in Dispensing Position

Spills while dispensing drums are contained in an internal sump, so you can transport the drum even after a spill occurs. A U-shaped platform with a recessed step and molded handles makes loading, unloading, and tipping to dispense easy. A strap secures the drum. In the dispensing position, the drum is held at a slight downward angle for better flow. The sump has two openings with garden hose threads for drainage.

Meets EPA 40 CFR 264.175 for secondary containment of hazardous waste.

Polypropylene Wheel—Use trucks with polypropylene wheels on smooth surfaces.

Rubber Wheel—Trucks with rubber wheels absorb shock to roll on smooth and rough surfaces.

	For Container							O'all			Wheel
	Material	Cap., gal.	Dia.	Ht.	Spill Cap., gal.	Overall Wt. Cap., lb.	Dispensing Ht.	Lg	Wd.	Ht.	Dia.	Material	Type	Features		Each
Polyethylene







				Strap Holding Mechanism

				Fiber, Plastic, Steel	55	24"	34"	80	600	15"	26 1/2"	32 1/2"	69"	10"	Polypropylene	Solid	Two Openings with 3/4" Garden Hose Thread	25315T14	0000000


				Fiber, Plastic, Steel	55	24"	34"	80	600	15"	26 1/2"	34 1/2"	69"	10"	Rubber	Solid	Two Openings with 3/4" Garden Hose Thread	25315T24	000000

Stable-Ride Drum Trucks


Style A	Style B

Style C	Style D

A second set of axle-mounted wheels offers better load support and stability to handle heavy loads over longer distances. Trucks cradle the drum during transport and are designed to stand upright on their own. Load wedges slide under the drum for easy loading. All trucks have a rim catch that clamps to the top of the drum to secure it.

Spring-Loaded Rim Catch—Spring-loaded rim catches automatically clamp to the drum as it's tilted.

Painted Steel Body and Powder-Coated Steel Body—Steel trucks are durable.

Aluminum—Aluminum trucks are strong, spark resistant, and lighter in weight than steel trucks.

Styles A and C—Styles A and C have standard handles with grips as well as a loop handle for better control.

Style B—Style B have a heavy duty cradle and an easy-tilt axis that makes it easier to tilt the trucks and get them rolling.

Style D—Style D have a hand brake for more control on ramps and inclines. They have standard handles with grips as well as a loop handle for better control.

Phenolic Wheel—Phenolic wheels are nonmarking and roll best on smooth surfaces, but can be noisy.

Polypropylene Wheel—Polypropylene wheels are lightweight and work on smooth surfaces.

Rubber Wheel—Rubber wheels absorb shock, are quiet, and roll over smooth or rough surfaces.

Steel Wheel—Steel wheels are rugged but noisy and can damage floors. They roll best on smooth surfaces.

Pneumatic Wheel—Pneumatic rubber wheels provide a cushioned ride over the roughest surfaces, such as gravel.

		For Container					O'all		Wheel
	Style	Cap., gal.	Dia.	Ht.	Material	Overall Wt. Cap., lb.	Wd.	Ht.	Front Dia.	Front Material	Front Type	Rear Dia.	Rear Material	Rear Type		Each
Adjustable Rim Catch Holding Mechanism







				Orange Painted Steel

				A	30, 55	18" to 24"	28" to 40"	Fiber, Steel	1,000	24 1/2"	62"	10"	Polypropylene	Solid	6"	Polypropylene	Solid	2637T2	0000000


				A	30, 55	18" to 24"	28" to 40"	Fiber, Steel	1,000	24 1/2"	62"	10"	Rubber	Tread on Core	6"	Rubber	Tread on Core	2637T4	000000
				A	30, 55	18" to 24"	28" to 40"	Fiber, Steel	1,000	24 1/2"	62"	10"	Steel	Solid	6"	Steel	Solid	2637T3	000000




						Red Powder-Coated Steel

						B	30, 55, 85	13" to 27"	24 1/2" to 48"	Fiber, Plastic, Steel	1,000	24"	61"	4"	Phenolic	Solid	10"	Phenolic	Solid	2514T3	000000


						B	30, 55, 85	13" to 27"	24 1/2" to 48"	Fiber, Plastic, Steel	1,000	25 1/4"	61"	4"	Rubber	Tread on Core	10"	Rubber	Tread on Core	2514T4	000000


						Spring Loaded Rim Catch Holding Mechanism







										Green Painted Steel

										C	30, 55	19 1/4" to 23 1/2"	23" to 37"	Fiber, Plastic, Steel	1,000	24 1/2"	59"	10"	Rubber	Solid	6"	Polyurethane Rubber	Solid	2850T15	000000


										C	30, 55	19 1/4" to 23 1/2"	23" to 37"	Fiber, Plastic, Steel	1,000	26"	59"	12 1/2"	Rubber	Pneumatic	6"	Polyurethane Rubber	Solid	2850T16	000000
										D	30, 55	19 1/4" to 23 1/2"	23" to 37"	Fiber, Plastic, Steel	1,000	24 1/2"	59"	10"	Rubber	Solid	6"	Polyurethane Rubber	Solid	2850T11	00000000




												Aluminum

												C	30, 55	18" to 24"	23" to 37"	Fiber, Plastic, Steel	1,000	24 1/2"	59"	10"	Rubber	Solid	6"	Polyurethane Rubber	Solid	2850T17	000000


												C	30, 55	18" to 24"	23" to 37"	Fiber, Plastic, Steel	1,000	26"	59"	12 1/2"	Rubber	Pneumatic	6"	Polyurethane Rubber	Solid	2850T18	000000
												D	30, 55	18" to 24"	23" to 37"	Fiber, Plastic, Steel	1,000	24 1/2"	59"	10"	Rubber	Solid	6"	Polyurethane Rubber	Solid	2850T13	00000000

Battery-Operated Drum Lift Trucks

Lift heavy drums in seconds—without ever touching them. Powered by a battery-operated hydraulic pump, these trucks grip, lift, lower, and release drums with the push of a button. No manual pumping required. The claw-style grabber won’t release the drum until it’s fully set down. With a lift height over 3 ft., these trucks can stack two drums or load them into most pickup trucks. A V-style base makes it easy to load and unload drums from pallets and platforms. Plug these trucks into any standard wall outlet to charge the battery.

Retractable legs let you maneuver in tight spaces, and two swivel casters at the back of the truck make steering and pivoting easy. Once the truck is in place, engage the floor lock to keep it stable while you lift and lower loads. The wheels are phenolic, so they’re nonmarking and roll best on smooth surfaces.

V-Style Base—Hydraulic Push Button

Push Button

	For Container						Overall											Wheel
	Material	Cap., gal.	Dia.	Ht.	Overall Wt. Cap., lb.	Cap. with Retracted Legs, lb.	Lg.	Wd.	Ht.	Body Color	Handle Ht.	Max. Lift	Elevation Speed, in/sec	Batteries Included	Brake Type	Holding Mechanism	Voltage, V DC	Dia.	Type		Each
Painted Steel Body with Phenolic Wheels



		Fiber Plastic Steel	30, 55, 85	19" to 24"	34" to 71"	1,100	650	34" to 37"	36" to 41"	66" to 73"	Red	38"	37"	8 1/2	Yes	Floor Lock	Rim Catch	12	5"	Solid	9927N121	000000000

Stainless Steel Drum Dispensing Trucks


		Kickstand

These corrosion-resistant stainless steel trucks withstand harsh environments and frequent washdowns. Load wedges slide under the drum for easy loading and unloading, and a spring-loaded kickstand keeps the truck standing and adds stability during dispensing. The four polypropylene wheels are suitable for long distance moves on smooth surfaces.

	For Container						O'all		Wheel
	Material	Cap., gal.	Dia.	Ht.	Overall Wt. Cap., lb.	Dispensing Ht.	Wd.	Ht.	Dia.	Material	Type	Features		Each
304 Stainless Steel



		Fiber, Plastic, Steel	30, 55, 85	14" to 28"	31" to 41"	1,000	12 3/4"	19 3/4"	62 11/16"	8"	Polypropylene	Solid	Kickstand	2493T37	000000000

Easy-Move Steel Drum Dispensing Trucks


Shown in Dispensing Position

Instead of tilting these trucks during transport, push on the handle to lift a drum straight off the ground and move it easily over obstacles. Push the handle down to tilt the drum and dispense. They are suited for long distance moves and are easier to move than mobile drum dispensing stands. Trucks have a drum saddle with a chain and ratchet-style tightener to secure the drum. A handle lock prevents unintentional lowering and a tilt lock keeps the drum vertical. Release the tilt lock for mixing. The rear swivel caster makes them easy to steer. Their lightweight polypropylene wheels roll best on smooth surfaces.

	For Container						Lift		O'all		Wheel
	Material	Cap., gal.	Dia.	Ht.	Overall Wt. Cap., lb.	Dispensing Ht.	Min.	Max.	Wd.	Ht.	Front Dia.	Front Material	Front Type	Rear Dia.	Rear Material	Rear Type		Each
Blue Painted Steel



		Plastic, Steel	55	22 1/2" to 24"	34" to 36"	800	17"	5 1/8"	11"	35 1/4"	66"	8"	Polypropylene	Solid	4"	Polypropylene	Solid	2646T17	0000000


		Steel	55	22 1/2"	36"	800	17"	5 1/8"	11"	35 1/4"	66"	8"	Polypropylene	Solid	4"	Polypropylene	Solid	2646T15	000000

Battery-Operated Fork-Mount Drum Dispensers


Dispenser	Push Button Tilt Mechanism

From the comfort of your forklift, just push a button to dispense heavy drums into large containers, vats, and hoppers. The battery-powered tilt offers greater precision than a manual tilt for a smoother, more controlled pour. You can rotate drums 180° in either direction. It takes about 15 seconds to fully invert them. On a single charge, you’ll be able to empty about 70 drums. These dispensers slide onto your forklift forks and secure with thumb screws. A chain with a ratchet-style tightener holds the drum in place.

Drum adapters fit inside the saddle to hold 30-gallon drums.

Bracket kits for fiber and plastic drums bolt onto the side of the drum saddle and clamp to the top and bottom of the drum. They give the dispenser enough stability to be used with rimless plastic and fiber drums.

Note: Contents shift in half-full drums, which reduces capacity.

Warning: Never use to lift people or items over people.

	Dispensers															30-Gal. Drum Adapters		Bracket Kits for Fiber and Plastic Drums
	For Container			Overall Wt. Cap., lb.		For Max. Fork
	Material	Cap., gal.	Dia.	Full Drum	Half-Full Drum	Wd.	Ht.	Fork Pocket Spacing Ctr.-to-Ctr.	Load Center	Tilt Mechanism	Holding Mechanism (No. of)	Voltage, V DC	Batteries Included		Each		Each		Each
Steel Body



		Steel	55	22" to 23 1/2"	1,500	800	6 1/2"	2 1/2"	31 1/2"	24"	Push Button	Chain (1)	12	Yes	9556N111	000000000	3407T52	0000000	9575N113	0000000

Wheel Dia.	Wheel Material	Wheel Type		Each
10"	Polyolefin	Solid	23615T112	000000
10"	Rubber	Tread on Core	23615T52	000000

Wheel Dia.	Wheel Material	Wheel Type		Each
6"	Polyolefin	Solid	23615T113	000000
6"	Rubber	Tread on Core	23615T55	00000
10"	Polyolefin	Solid	23615T112	00000
10"	Rubber	Tread on Core	23615T52	000000