Choose-a-Color Lockout Hasps with Label
Lockouts come in different colors for easy identification and to help meet OSHA standards. The label is permanently attached to record employee name and department. Use these lockouts to lock out a single energy control on machinery and electrical equipment so it can't be used.
For technical drawings and 3-D models, click on a part number.
Low-Profile Lockout Hasps with Label
Same as our other low-profile lockout hasps, but with an attached label to record employee name and department. Use this lockout hasp to lock out a single energy control on machinery and electrical equipment so it can't be used. It helps you comply with OSHA 29 CFR 1910.147 procedures for the control of energy sources that could injure workers. Hasps that meet OSHA 29 CFR 1910.145 adhere to safety color standards for indicating hazards.
For technical drawings and 3-D models, click on a part number.
Hasp Clearance | Overall | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Vertical | Horizontal | Hasp Thick. | For Max. No. of Padlocks | For Max. Padlock Shackle Dia. | Lg. | Wd. | Message | Specifications Met | Each | |
Nickel-Plated Steel | ||||||||||
| 1" | 1 1/4" | 1/4" | 7 | 3/8" | 3" | 3" | Danger—Do Not Operate | OSHA Compliant 29 CFR 1910.145, OSHA Compliant 29 CFR 1910.147 | 00000000 | 000000 |
Low-Profile Lockout Hasps
With a smaller overall length, these lockout hasps fit in tighter spaces than other lockout hasps yet still hold a similar number of locks. Use them to lock out a single energy control on machinery and electrical equipment so it can't be used. They help you comply with OSHA 29 CFR 1910.147 procedures for the control of energy sources that could injure workers.
For technical drawings and 3-D models, click on a part number.
Lockout Hasps with Chain
These have a chain to attach to equipment so they won't get lost. Use them to lock out a single energy control on machinery and electrical equipment so it can't be used. Lockouts are vinyl coated so they won't mar surfaces. They help you comply with OSHA 1910.147 procedures for the control of energy sources that could injure workers.
For technical drawings and 3-D models, click on a part number.
Hasp Clearance | Overall | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Vertical | Horizontal | Hasp Thick. | For Max. No. of Padlocks | For Max. Padlock Shackle Dia. | Lg. | Wd. | Color | Specifications Met | Each | |
Vinyl-Coated Aluminum | ||||||||||
| 1" | 1" | 1/4" | 6 | 7/16" | 4 3/8" | 1 1/2" | Red | OSHA Compliant 29 CFR 1910.147 | 00000000 | 000000 |
| 1 1/2" | 1 1/2" | 1/4" | 6 | 7/16" | 4 7/8" | 1 1/2" | Red | OSHA Compliant 29 CFR 1910.147 | 00000000 | 00000 |
Dual-Jaw Lockout Hasps
Like two lockout hasps in one, there's a jaw at each end with different clearances for added versatility. Use these lockout hasps to lock out a single energy control on machinery and electrical equipment so it can't be used. They help you comply with OSHA 29 CFR 1910.147 procedures for the control of energy sources that could injure workers.
For technical drawings and 3-D models, click on a part number.
Hasp Clearance | Overall | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Vertical | Horizontal | Hasp Thick. | For Max. No. of Padlocks | For Max. Padlock Shackle Dia. | Lg. | Wd. | Specifications Met | Each | |
Zinc-Plated Steel | |||||||||
| 1/2" × 1" | 1/2" × 1" | 5/16" × 5/16" | 6 | 5/16" | 7 3/4" | 1 3/8" | OSHA Compliant 29 CFR 1910.147 | 00000000 | 000000 |
Aluminum | |||||||||
| 1" × 1 1/2" | 1" × 1 1/2" | 1/4" × 1/4" | 8 | 9/32" | 5 7/8" | 2" | OSHA Compliant 29 CFR 1910.147 | 00000000 | 00000 |
Battery Cable Connector Lockouts
Padlock these lockouts over the ends of battery cables to keep forklifts, pallet jacks, and other machinery powered off during maintenance. They signal that equipment is being serviced, preventing accidental startups. These lockouts have space for two padlocks, so teams can safely perform two maintenance tasks at once.
Made from nonconductive plastic, they insulate battery terminals and protect workers from accidental shocks, helping you comply with OSHA 29 CFR 1910.147 requirements for the control of electricity. These lockouts are also rated UL 94 HB, which means they have been tested in a horizontal position for flame resistance; the slow-burning plastic keeps flames from spreading.
Hinged lockouts fully enclose battery cable ends and inline connections. Fit battery connectors, such as lugs and terminal clamps, over the internal post to hold cables in place.
Slide-on lockouts are best for large battery connectors.
For Max. Connector | Cable Opening | Overall | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. | For No. of Battery Cables | Wd. | Ht. | Post Dia. | Lg. | Wd. | Ht. | For Max. No. of Padlocks | For Max. Padlock Shackle Dia. | Temp. Range, °F | Color | Specifications Met | Each | |
Hinged | ||||||||||||||||
Plastic | ||||||||||||||||
| 2 5/8" | 1 1/2" | 1 1/4" | 1 | 1" | 1" | 1/4" | 3 3/4" | 2 7/8" | 1 3/8" | 2 | 5/16" | -40° to 212° | Red | OSHA Compliant 29 CFR 1910.147, UL 94 HB | 0000000 | 000000 |
| 2 5/8" | 2 3/4" | 1 5/8" | 2 | 2" | 1 3/8" | 1/4" | 5 3/4" | 4 1/8" | 1 3/4" | 2 | 5/16" | -40° to 212° | Red | OSHA Compliant 29 CFR 1910.147, UL 94 HB | 0000000 | 00000 |
Slide On | ||||||||||||||||
Plastic | ||||||||||||||||
| 4 1/2" | 2 7/8" | 1 3/8" | __ | __ | __ | __ | 5 1/4" | 3 1/8" | 2 1/2" | 2 | 5/16" | -40° to 212° | Red | OSHA Compliant 29 CFR 1910.147, UL 94 HB | 0000000 | 00000 |