Filter by
System of Measurement
Bearing Type
Bearing Seal Type
Cage Material
Ring Material
Shaft Type
Inner Ring Type
Bearing Trade Number
Bearing Construction
Ball Material
For Load Direction
Lubrication
Dynamic Radial Load Capacity
DFARS Specialty Metals
Export Control Classification Number (ECCN)
About Ball and Roller Bearings
More
Stainless Steel Ball Bearings
Bearings are 440C stainless steel for good corrosion resistance.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Shielded

Shielded
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
105-2Z | 5mm | 10mm | 4mm | 440C Stainless Steel | 95 | 30 | 60,000 | Lubricated | -40° to 240° | ABEC-5 | 00000000 | 00000 |
Flanged Ball Bearings
The flange ensures proper positioning inside a tube or housing.
440C stainless steel bearings are more corrosion resistant than steel bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Shielded

Shielded

Flanged Bearing
Flange | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
105-2Z | 5mm | 10mm | 4mm | 11.2mm | 0.8mm | 440C Stainless Steel | 70 | 30 | 60,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 000000 |
105-2Z | 5mm | 10mm | 4mm | 11.2mm | 0.8mm | Steel | 90 | 35 | 60,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 00000 |
105-2Z | 5mm | 10mm | 4mm | 11.6mm | 0.8mm | 440C Stainless Steel | 95 | 30 | 60,000 | Lubricated | -20° to 250° | ABEC-5 | 00000000 | 0000 |