Filter by
System of Measurement
Bearing Seal Type
Shaft Type
Bearing Type
For Load Direction
Bearing Construction
Bearing Trade Number
Inner Ring Type
Material
Cage Material
DFARS Specialty Metals
Dynamic Radial Load Capacity
Export Control Classification Number (ECCN)
Lubrication
Maximum Temperature
Minimum Temperature
Misalignment Capability
Performance
Radial Clearance
REACH
RoHS
U.S.–Mexico–Canada Agreement (USMCA) Qualifying
Tapered-Bore Ball Bearings
 |
Mount these bearings on tapered shafts. Or, pair with an adapter sleeve to install them on round shafts without needing to press fit. The two rows of balls have separate raceways in the inner ring and a shared raceway in the outer ring, so the balls rock back and forth to compensate for misalignment. This construction also reduces noise and vibration.
Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.
Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.
ABEC Rating—Bearings with an ABEC rating meet industry tolerance standards established by the Annular Bearing Engineers Committee (ABEC). They're rated on a scale from 1 to 9. The higher the rating, the tighter the tolerance. Bearings rated ABEC 1 or 3 are precise enough for most applications. If your application consistently runs at high speeds or requires high accuracy, consider bearings rated ABEC 5 or higher, since they generate less friction and heat.
Bearings | Adapter Sleeves | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Temp. Range | ||||||||||||||||||
For Shaft Dia., mm | For Housing ID, mm | Wd., mm | ABEC Rating | Dynamic Radial Load Cap., lb. | Max. Rotation Speed, rpm | Misalignment Capability | Rate of Taper | Min. | Max., ° F | Inner Ring Type | Bearing Trade No. | Each | For Shaft Dia., mm | Each | ||||
Open | ||||||||||||||||||
Steel | ||||||||||||||||||
| 30 | 62 | 16 | 1 | 3,550 | 10,000 | 4° | 1:12 | Not Rated | 240 | Standard | 1206K | 7755N19 | 000000 | 25 | 4449N18 | 000000 | ||
