3202-2RS Bearings | McMaster-Carr

Support radial and thrust loads at the same time. These bearings are often found inside equipment such as gearboxes and pumps. For example, a bearing inside a gearbox withstands a radial load when the gear is engaged and a momentary thrust load when you shift to a new one. While they don't handle as much force from radial loads as standard bearings, you can pair them with a cylindrical roller bearing to increase their load capacity.

Double Row—Double-row bearings handle thrust loads from both directions.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

ABEC Rating—Bearings with an ABEC rating meet industry tolerance standards established by the Annular Bearing Engineers Committee (ABEC). They're rated on a scale from 1 to 9. The higher the rating, the tighter the tolerance. Bearings rated ABEC 1 or 3 are precise enough for most applications. If your application consistently runs at high speeds or requires high accuracy, consider bearings rated ABEC 5 or higher, since they generate less friction and heat.

										Temp. Range, ° F
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Material	Dynamic Combined Load Cap., lbf	Max. Rotation Speed, rpm	Lubrication	Contact Angle	Min.	Max.	Bearing Trade No.		Each
Double Row







				Sealed

				15	35	15.9	1	Steel	2,500	14,000	Lubricated	30°	-40	210	3202-2RS	8828T313	0000000
				Angular-Contact Double Row Ball Bearing, Sealed, Trade No. 3202-2RS, for 15mm Shaft Diameter Product Detail QuantityEachIn stock Select a compatible file type: Parasolid Compatible Products for This Ball Bearing

Angular Contact Ball Bearings

Compatible Products for This Ball Bearing