6.5mm Housing ID Bearings | McMaster-Carr

Filter by

System of Measurement

Shaft Diameter

OD

Width

Cage Material

Bearing Type

ID

For Load Direction

Combined Radial and Thrust

Shaft Type

Length

Bearing Construction

Bearing Seal Type

Material

841 Bearing Bronze

863 Iron Copper

Maximum Rotation Speed

For Housing ID

0.3124" to 0.3130"

0.3749" to 0.3755"

0.3750" to 0.3755"

0.3755" to 0.3764"

0.3760" to 0.3770"

0.4999" to 0.5005"

0.5000" to 0.5005"

0.5000" to 0.5007"

0.5000" to 0.5010"

0.5006" to 0.5017"

0.6250" to 0.6255"

0.6250" to 0.6257"

0.6256" to 0.6267"

0.8740" to 0.8760"

0.8750" to 0.8755"

0.8750" to 0.8758"

0.8758" to 0.8771"

1.1250" to 1.1255"

1.1250" to 1.1258"

1.1258" to 1.1271"

1.2490" to 1.2510"

1.2500" to 1.2505"

1.2500" to 1.2510"

1.2510" to 1.2525"

1.5615" to 1.5635"

1.5625" to 1.5630"

1.5625" to 1.5635"

1.5635" to 1.5650"

2.0000" to 2.0008"

2.0000" to 2.0010"

2.0000" to 2.0012"

2.0012" to 2.0030"

2.3750" to 2.3760"

2.3750" to 2.3762"

2.3762" to 2.3780"

3.0000" to 3.0010"

3.0000" to 3.0012"

3.0012" to 3.0030"

3.7500" to 3.7510"

7.000 mm to 7.015 mm

8.000 mm to 8.015 mm

10.000 mm to 10.018 mm

12.000 mm to 12.018 mm

12.016 mm to 12.043 mm

15.000 mm to 15.018 mm

16.000 mm to 16.015 mm

16.000 mm to 16.018 mm

16.000 mm to 16.035 mm

16.016 mm to 16.043 mm

17.000 mm to 17.018 mm

19.000 mm to 19.021 mm

21.000 mm to 21.021 mm

22.000 mm to 22.021 mm

22.000 mm to 22.018 mm

22.000 mm to 22.026 mm

22.020 mm to 22.053 mm

23.000 mm to 23.021 mm

24.000 mm to 24.021 mm

26.000 mm to 26.021 mm

26.000 mm to 26.018 mm

26.000 mm to 26.026 mm

26.003 mm to 26.033 mm

26.020 mm to 26.053 mm

28.000 mm to 28.021 mm

32.000 mm to 32.025 mm

32.000 mm to 32.030 mm

32.004 mm to 32.037 mm

32.025 mm to 32.064 mm

35.000 mm to 35.025 mm

40.000 mm to 40.025 mm

40.000 mm to 40.021 mm

40.000 mm to 40.030 mm

40.004 mm to 40.037 mm

40.025 mm to 40.064 mm

45.000 mm to 45.025 mm

47.000 mm to 47.021 mm

47.000 mm to 47.025 mm

47.000 mm to 47.030 mm

47.004 mm to 47.037 mm

47.025 mm to 47.064 mm

52.000 mm to 52.030 mm

60.000 mm to 60.030 mm

62.000 mm to 62.023 mm

62.000 mm to 62.025 mm

62.000 mm to 62.030 mm

62.005 mm to 62.044 mm

75.000 mm to 75.030 mm

90.000 mm to 90.035 mm

Dynamic Radial Load Capacity

Less than 10,000 lb.

Shaft Mount Type

Static Radial Load Capacity

Less than 10,000 lb.

Plain Bearing Type

Lubrication

Roller Bearing Type

RoHS

DFARS Specialty Metals

Export Control Classification Number (ECCN)

REACH

Minimum Temperature

-99° F to -1° F

Greater than 0° F

How can we improve?

4 Products

Needle-Roller Bearings

Image of Product. Front orientation. Roller Bearings. Needle-Roller Bearings.

Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together. Bearings take on the shape of their housing and may be oblong prior to installation.

Open Bearing—Open bearings dissipate heat more efficiently than sealed bearings.

				Radial Load Cap., lb.
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Dynamic	Static	Max. Rotation Speed, rpm	Lubrication	For Shaft Surface Smoothness, Ra, μin	Temp. Range, ° F	Specs. Met		Each
For Radial Load—Open with Steel Ring



		3	6.5	6	270	180	48,000	Required	8	0 to 240	DIN 618, ISO 3245	00000000	00000

Oil-Embedded Flanged Sleeve Bearings

Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Oil-Embedded Flanged Sleeve Bearings.

Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.

Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.

Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.

	For Shaft Dia., mm	For Housing ID, mm	Lg., mm	Flange OD, mm	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze



		2.5	6.5	4	8.5	2	31 lb. @ 120 rpm	160 lb. @ 120 rpm	Synthetic Oil	-35 to 300	0000000	000000


		High-Load 863 Iron Copper



				2.5	6.5	4	8.5	2	60 lb. @ 120 rpm	260 lb. @ 120 rpm	Synthetic Oil	-15 to 300	00000000	00000

Oil-Embedded Sleeve Bearings

Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.

	For Shaft Dia., mm	For Housing ID, mm	Lg., mm	Dynamic Radial Load Cap. @ Speed	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze



		2.5	6.5	4	31 lb. @ 120 rpm	Synthetic Oil	-35 to 300	0000000	000000

back to top

The quick brown fox jumped over the lazy dog. Pedestal (35" Ht. x 4" Wd. x 4" Dp.)