62mm Housing ID Bearings

Smoother than smooth—the balls inside these bearings roll nearly friction-free. You’ll often find them on rapidly rotating parts, from the whirring chuck on a power drill to the spinning shaft on an electric motor.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Shielded—The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

Corrosion-Resistant 440C Stainless Steel—Combine the strength of steel with the corrosion resistance of stainless steel. These bearings won't degrade from water or mild chemicals, such as the ammonia in cleaning solutions. However, they'll weaken when exposed to salt water and harsh chemicals, such as bleach.

Highly Corrosion-Resistant 316 Stainless Steel—The most corrosion-resistant metal bearings we offer. They won't pit or weaken from salt water or harsh chemicals, such as bleach and chlorine found in cleaning solutions.

ABEC Rating—Bearings with an ABEC rating meet industry tolerance standards established by the Annular Bearing Engineers Committee (ABEC). They're rated on a scale from 1 to 9. The higher the rating, the tighter the tolerance. Bearings rated ABEC 1 or 3 are precise enough for most applications. If your application consistently runs at high speeds or requires high accuracy, consider bearings rated ABEC 5 or higher, since they generate less friction and heat.

							Temp. Range, ° F
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Inner Ring Type	Bearing Trade No.		Each
Open







				Steel

				17	62	17	1	5,350	16,000	-20	230	Standard	6403	5972K198	000000


				25	62	17	1	5,000	16,200	-20	230	Standard	6305	5972K121	00000
				30	62	16	1	4,300	14,000	-20	230	Standard	6206	5972K316	00000
				35	62	14	1	3,550	16,100	-20	230	Standard	6007	5972K312	00000
				40	62	12	1	3,050	11,000	-20	230	Standard	6908	5972K249	00000




						Corrosion-Resistant 440C Stainless Steel

						30	62	16	1	2,950	11,000	-40	240	Standard	6206	6153K124	00000




								Highly Corrosion-Resistant 316 Stainless Steel

								25	62	17	Not Rated	270	720	-40	140	Standard	6305	5908K742	00000


								Shielded







												Steel

												25	62	17	1	5,000	11,000	-20	230	Standard	6305-2Z	5972K352	00000


												25	62	17	3	5,250	13,000	-20	230	Standard	6305-2Z	6661K66	00000
												30	62	16	1	4,300	11,000	-20	230	Standard	6206-2Z	5972K342	00000
												30	62	16	3	4,550	12,000	-20	230	Standard	6206-2Z	6661K47	00000
												35	62	14	1	3,000	11,000	-20	230	Standard	6007-2Z	5972K365	00000
												35	62	14	3	3,750	12,000	-20	230	Standard	6007-2Z	4481N16	00000
												40	62	12	1	3,050	11,000	-20	230	Standard	6908-2Z	5972K173	00000




														Corrosion-Resistant 440C Stainless Steel

														25	62	17	1	3,900	12,000	-40	240	Standard	6305-2Z	6153K163	000000


														30	62	16	1	2,950	11,000	-40	240	Standard	6206-2Z	6153K61	00000
														35	62	14	1	3,050	11,000	-40	240	Standard	6007-2Z	6153K166	000000


Sealed







														Steel

														17	62	17	1	5,350	16,000	-20	230	Standard	6403-2RS	5972K226	00000


														25	62	17	1	5,950	11,300	-20	230	Standard	6305-2RS	5972K518	00000
														25	62	17	3	5,250	7,500	-30	210	Standard	6305-2RS	6661K126	00000
														30	62	16	1	4,900	10,200	-20	230	Standard	6206-2RS	5972K608	00000
														30	62	16	3	4,550	7,500	-30	210	Standard	6206-2RS	6661K107	00000
														35	62	14	1	3,900	9,300	-20	230	Standard	6007-2RS	5972K658	00000
														35	62	14	3	3,750	14,000	-30	210	Standard	6007-2RS	4481N63	00000
				40										62	12	1	3,050	11,000	-20	230	Standard	6908-2RS	5972K295	00000




														Corrosion-Resistant 440C Stainless Steel

						30								62	16	1	3,700	11,000	-40	240	Standard	6206-2RS	6153K81	00000

Angular Contact Ball Bearings


Single Row Open	Single Row Sealed	Double Row Open	Double Row Shielded	Double Row Sealed

Support radial and thrust loads at the same time. These bearings are often found inside equipment such as gearboxes and pumps. For example, a bearing inside a gearbox withstands a radial load when the gear is engaged and a momentary thrust load when you shift to a new one. While they don't handle as much force from radial loads as standard bearings, you can pair them with a cylindrical roller bearing to increase their load capacity.

Single Row—Single-row bearings withstand thrust loads from one direction.

Double Row—Double-row bearings handle thrust loads from both directions.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Shielded—The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

										Temp. Range, ° F
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Material	Dynamic Combined Load Cap., lbf	Max. Rotation Speed, rpm	Lubrication	Contact Angle	Min.	Max.	Bearing Trade No.		Each
Single Row







				Open

				25	62	17	3	Steel	5,400	14,000	Required	40°	-40	300	7305	6680K27	0000000


				30	62	16	3	Steel	5,050	13,000	Required	40°	-40	300	7206	6680K17	000000
				35	62	14	5	Steel	4,500	24,200	Required	15°	-40	250	7007	2385K103	000000




						Sealed

						25	62	17	1	Steel	6,250	7,000	Lubricated	40°	-20	230	7305-2RS	6680K47	000000


						30	62	16	1	Steel	4,850	6,300	Lubricated	40°	-20	230	7206-2RS	6680K41	000000


						Double Row







										Open

										25	62	25.4	3	Steel	7,150	11,000	Required	30°	-40	250	3305	8828T124	000000


										30	62	23.8	3	Steel	6,700	10,000	Required	30°	-40	250	3206	8828T117	000000




												Shielded

												25	62	25.4	3	Steel	7,150	11,000	Lubricated	30°	-40	300	3305-2Z	8828T224	000000


												30	62	23.8	3	Steel	6,700	10,000	Lubricated	30°	-40	250	3206-2Z	8828T217	000000




														Sealed

														25	62	25.4	3	Steel	7,150	7,500	Lubricated	30°	-40	210	3305-2RS	8828T324	000000


														30	62	23.8	3	Steel	6,700	7,500	Lubricated	30°	-40	210	3206-2RS	8828T317	000000

Permanently Lubricated Ball Bearings

Install and forget these self-lubricating bearings. Their lubricant is a solid material that fills the space between the balls and releases oil over time, so you'll never need to add more.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

							Temp. Range, ° F
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Inner Ring Type	Bearing Trade No.		Each
Open







				Steel

				25	62	17	1	3,650	6,700	10	200	Standard	6305	2349K716	000000


				30	62	16	1	3,700	6,500	10	200	Standard	6206	2349K225	00000
				35	62	14	1	2,750	6,000	10	200	Standard	6007	2349K704	00000
				40	62	12	1	3,050	5,700	10	200	Standard	6908	2349K742	00000




						Corrosion-Resistant 440C Stainless Steel

						25	62	17	1	3,650	7,000	-10	200	Standard	6305	4668K327	000000


						30	62	16	1	3,350	6,000	-10	200	Standard	6206	4668K199	000000
						35	62	14	1	2,750	6,000	-10	200	Standard	6007	4668K188	000000


						Sealed







										Steel

										25	62	17	1	3,650	6,700	10	200	Standard	6305-2RS	2349K772	00000


										30	62	16	1	3,700	6,500	10	200	Standard	6206-2RS	2349K425	00000
										35	62	14	1	2,750	6,000	10	200	Standard	6007-2RS	2349K749	00000
										40	62	12	1	3,070	5,700	10	200	Standard	6908-2RS	2349K797	00000




												Corrosion-Resistant 440C Stainless Steel

												25	62	17	1	3,650	7,000	-10	200	Standard	6305-2RS	4668K318	000000


												30	62	16	1	3,350	6,000	-10	200	Standard	6206-2RS	4668K307	000000
												35	62	14	1	2,750	6,000	-10	200	Standard	6007-2RS	4668K296	000000
												40	62	12	1	3,050	6,000	-10	200	Standard	6908-2RS	4668K282	000000

Self-Aligning Ball Bearings

Open

Sealed

Misalignments correct themselves on the fly in these bearings. Two rows of balls have separate raceways in the inner ring and a shared raceway in the outer ring, so the balls rock back and forth to compensate for misalignment. This construction also reduces noise and vibration.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

								Temp. Range, ° F
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Misalignment Capability	Min.	Max.	Inner Ring Type	Bearing Trade No.		Each
Open







				Steel

				25	62	17	1	4,050	10,000	4°	Not Rated	210	Standard	1305	6660K328	000000


				25	62	24	1	6,050	16,000	3°	-30	210	Standard	2305	6660K54	000000
				30	62	16	1	3,550	10,000	4°	Not Rated	210	Standard	1206	6660K329	00000
				30	62	20	1	5,350	15,000	2.5°	-30	210	Standard	2206	6660K18	000000


				Sealed







								Steel

								25	62	24	1	4,250	7,500	1.5°	-30	210	Standard	2305-2RS	6660K74	000000


								30	62	20	1	3,500	7,500	1.5°	-30	210	Standard	2206-2RS	6660K67	000000

Tapered-Roller Bearings

Found anywhere from machine tool spindles to conveyor rollers, these bearings have a two-piece design that allows for adjustment.

					Radial Load Cap., lb.		Thrust Load Cap., lb.
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Bearing Trade No.	Dynamic	Static	Dynamic	Static	Max. Rotation Speed, rpm	Lubrication	Temp. Range, ° F		Each
For Combined Radial and Thrust Load—Open with Steel Ring



		30	62	14	30206	2,350	9,850	1,500	12,700	3,400	Required	-60 to 200	6677K59	000000


		30	62	14	30206	10,200	11,350	6,450	Not Rated	6,300	Required	-50 to 300	6677K91	00000
		35	62	14	32007	2,550	12,900	2,000	17,100	3,000	Required	-60 to 200	6677K61	00000
		35	62	14	32007	9,400	12,550	7,400	Not Rated	6,000	Required	-50 to 300	6677K92	00000

High-Load Dry-Running Ball Bearings

Double the balls for double the load capacity—these bearings carry twice as much weight as standard dry-running ball bearings. Made of naturally slippery plastic, there's no lubricant to maintain. No lubricant means no oil that could drip off, wash out, or collect dust, so they're ideal for spic-and-span spaces. They stand up to thorough cleanings since they won't rust or warp from moisture.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, reducing wear and extending the life of the bearing.

Acetal—The most common choice for plastic bearings, acetal is economical yet still stands up to daily wear and tear.

316 Stainless Steel Balls—Won't corrode from salt water or harsh chemicals, such as bleach and chlorine found in cleaning solutions.

						Temp. Range, ° F				316 Stainless Steel Balls
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	ABEC Rating	Bearing Trade No.		Each
Open







				Acetal

				30	62	23	150	500	-40	180	Not Rated	A5206-6	5951N146	000000

Spherical-Roller Bearings

Two rows of rollers give these bearings dynamic radial load capacities over five times higher than comparably sized tapered-roller bearings. Also known as rock crusher bearings, they handle heavy shock loads and are used for metal milling machinery, mining and oil field equipment, and in paper mills.

						Combined Load Cap., lbf
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Bearing Trade No.	Ring Material	Dynamic	Static	Max. Rotation Speed, rpm	Lubrication	Max. Temp., ° F		Each
Open Bearing



		30	62	20	22206	Steel	11,200	11,200	6,000	Required	390	2721T2	0000000

Ball Bearings for Food and Beverage

Sealed

Food production rolls along smoothly on these bearings. Greased with FDA-compliant lubricant, they’re safe to install on food-processing equipment, such as conveyor belts, so long as they don’t directly touch the food. The lubricant is a solid material that fills the space between the balls and releases oil over time, so you'll never need to add more.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

							Temp. Range, ° F
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Inner Ring Type	Food Industry Std.	Bearing Trade No.		Each
Sealed







				Corrosion-Resistant 440C Stainless Steel

				25	62	17	1	3,900	7,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6305-2RS	4648K224	0000000


				30	62	16	1	3,700	6,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6206-2RS	4648K217	000000
				35	62	14	1	3,050	6,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6007-2RS	4648K208	000000

Electrically Insulating Ball Bearings

Shielded

Sealed

Protect bearings from stray currents. The ceramic balls insulate bearings from electrical charges in electric motors and power generators that can damage the inner ring over time. The balls also generate less heat than metal ones, so you don’t have to lubricate them as often to keep bearings running smoothly.

Shielded—The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

							Temp. Range, ° F			Ceramic Balls
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Bearing Trade No.		Each
Shielded







				Steel

				30	62	16	1	4,350	16,500	-20	250	6206-2Z	1389N34	0000000


				Sealed







								Steel

								30	62	16	1	4,550	15,000	-40	210	6206-2RZ	1389N23	000000

Ball Bearings with Retaining Ring

Shielded

Sealed

No need for complicated tools—install these bearings by hand inside a housing. The ring stops the bearing from being jostled out of place when it experiences sudden forces parallel to the shaft (thrust loads).

Shielded—The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

				Retaining Ring, mm					Temp. Range, ° F
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	OD	Thk.	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Inner Ring Type	Bearing Trade No.		Each
Shielded







				Steel

				25	62	17	67.7	1.7	1	5,250	13,000	-20	230	Standard	6305-2Z	6661K39	000000


				30	62	16	67.7	1.7	1	4,550	12,000	-20	230	Standard	6206-2Z	6661K77	00000


				Sealed







								Steel

								25	62	17	67.7	1.7	1	5,250	7,500	-40	210	Standard	6305-2RS	6661K29	00000


								30	62	16	67.7	1.7	1	4,550	7,500	-40	210	Standard	6206-2RS	6661K57	00000

Cylindrical Roller Bearings

With cylindrical rollers to distribute load over a large surface area, these bearings are often used to support heavy loads at high speeds in applications such as power generation and metal recycling. A cage prevents the rollers from touching each other, reducing friction for high-speed use. All of these bearings have an inner ring that's flanged on one side, so they only allow heat expansion in one direction. The bearings can be taken apart, so you can install them with precision and quickly dismantle them for maintenance or replacement.

				Radial Load Cap., lb.		Thrust Load Cap.
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Dynamic	Static	Dynamic	Static	Max. Rotation Speed, rpm	Lubrication	For Shaft Surface Smoothness, Ra, μm	Temp. Range, ° F	Specs. Met		Each
For Combined Radial and Thrust Load—Open with Steel Ring



		30	62	16	10,300	8,400	Not Rated	Not Rated	14,200	Required	0.8	-20 to 245	DIN 5412-1	3635N112	0000000

Dry-Running Ball Bearings

Made of naturally slippery plastic so there's no lubricant to maintain or make a mess. These bearings are ideal for spic-and-span spaces since oil won't drip off, wash out, or collect dust over time. They won't rust or warp from moisture, so they stand up to thorough cleanings.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, reducing wear and extending the life of the bearing.

Acetal—The most common choice for plastic bearings, acetal is economical yet still stands up to daily wear and tear.

316 Stainless Steel Balls—Won't corrode from salt water or harsh chemicals, such as bleach and chlorine found in cleaning solutions.

Glass Balls—Nonmagnetic, so they won't interfere with sensors and other sensitive electronics.

						Temp. Range, ° F				316 Stainless Steel Balls		Glass Balls
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	ABEC Rating	Bearing Trade No.		Each		Each
Open







				Acetal

				25	62	17	90	700	-40	180	Not Rated	6305	6455K171	000000	———	0


				35	62	9	110	600	-40	180	Not Rated	16007	———	0	6455K197	000000

High-Precision Angular Contact Ball Bearings

Open

Sealed

Our most precise bearings for tackling radial and thrust loads at once, with tolerances tighter than a speck of dust. Rated ABEC 7 out of 9, they meet strict tolerance standards established by the Annular Bearing Engineers Committee (ABEC). Choose them for equipment that requires both high speed and pinpoint accuracy, such as machine tool spindles. For example, a bearing on a spindle withstands a radial load as it spins at high speeds and a thrust load when the cutting tool touches the workpiece. These bearings don’t handle as much force from radial loads as standard ones, but you can pair them with a cylindrical roller bearing to increase their load capacity.

Single Row—Single-row bearings withstand thrust loads from one direction.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

										Temp. Range, ° F
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Material	Dynamic Combined Load Cap., lbf	Max. Rotation Speed, rpm	Lubrication	Contact Angle	Min.	Max.	Bearing Trade No.		Each
Single Row







				Open

				30	62	16	7	Steel	5,400	25,000	Required	15°	-40	245	7206	4487N26	0000000


				35	62	14	7	Steel	3,500	24,000	Required	15°	-30	140	7007	2385K47	000000




						Sealed

						35	62	14	7	Steel	4,500	23,800	Lubricated	15°	0	230	7007	4487N12	000000

Quick-Mount Ball Bearings

Set-Screw

Shaft Mount

Clamp-On Shaft

Mount

Slip onto a shaft and secure with the turn of a screw. You don't need any special tools to mount these bearings.

Set-Screw Shaft Mount—Tighten the screws against the shaft to hold the bearing in place. For high-speed applications, consider clamp-on shaft mounts, which are less likely to slip.

Clamp-On Shaft Mount—The clamp tightens around the shaft for a strong 360° grip. These mounts attach more securely than set screws to reduce vibration. Plus, there aren't any screws pressing into the shaft, so it stays free from damage. Also known as a concentric lock.

Black-Oxide Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

Shielded—The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

				Retaining Ring, mm						Temp. Range, ° F
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	OD	Thk.	Bearing Seal Type	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Bearing Trade No.		Each
Set-Screw Shaft Mount







				Black-Oxide Steel

				30	62	22.2	67.5	1.6	Sealed	1	4,350	5,450	-20	220	ER206	5629N13	0000000


				Clamp-On Shaft Mount







								Black-Oxide Steel

								30	62	22	68	1.6	Shielded	1	4,350	5,450	-20	220	ER206	6821N53	000000

One-Way-Locking Ball Bearings

Shielded

Sealed

Prevent shafts from reversing direction. These bearings have internal components (sprags) that lock against the outer ring to transmit torque one way but spin freely in the other. They're often found in backstopping, indexing, and overrunning applications. For example, they're used to prevent conveyors from reversing.

Shielded—The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

								Temp. Range, ° F
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Max. Torque, ft·lbf	Min.	Max.	Inner Ring Type	Bearing Trade No.		Each
Shielded







				Steel

				30	62	16	1	1,730	4,000	165	-40	170	Standard	FZ 6206	4752N72	0000000


				Sealed







								Steel

								30	62	21	1	1,730	4,200	165	-40	170	Standard	FZ 6206 2RS	4752N28	000000

Combination Ball/Needle-Roller Bearings

A built-in thrust ball bearing reduces wear from adjacent shaft components, while the needle rollers support high radial loads. Install anywhere you would use separate bearings for radial and thrust loads.

						Radial Load Cap., lb.		Thrust Load Cap., lb.
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Ball Bearing OD, mm	Ball Bearing Wd., mm	Dynamic	Static	Dynamic	Static	Max. Rotation Speed, rpm	Lubrication	For Shaft Surface Smoothness, Ra, μin	Temp. Range, ° F	Features		Each
For Combined Radial and Thrust Load—Open with Steel Ring



		50	62	35	71.5	14	6,750	15,400	6,450	13,510	4,300	Required	8	-20 to 230	Lubrication Groove, Lubrication Hole	1418N111	0000000

High-Temperature Graphite-Lubricated Ball Bearings

Keep parts spinning in industrial ovens and other places as hot as 660° F. Greased with graphite lubricant, these bearings stay slippery where oil would burn off or solidify. You can install and forget them since the lubricant lasts forever.

Shielded—The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

							Temp. Range, ° F
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Inner Ring Type	Bearing Trade No.		Each
Shielded







				Steel

				30	62	16	1	4,550	150	-70	660	Standard	6206-2Z	1258N33	0000000

Tapered-Bore Ball Bearings

Mount these bearings on tapered shafts. Or, pair with an adapter sleeve to install them on round shafts without needing to press fit. The two rows of balls have separate raceways in the inner ring and a shared raceway in the outer ring, so the balls rock back and forth to compensate for misalignment. This construction also reduces noise and vibration.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

	Bearings														Adapter Sleeves
									Temp. Range
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Misalignment Capability	Rate of Taper	Min.	Max., ° F	Inner Ring Type	Bearing Trade No.		Each	For Shaft Dia., mm		Each
Open







				Steel

				30	62	16	1	3,550	10,000	4°	1:12	Not Rated	240	Standard	1206K	7755N19	000000	25	4449N18	000000