About Plain Bearings
More
About Ball and Roller Bearings
More
Needle-Roller Bearings
Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together. Bearings take on the shape of their housing and may be oblong prior to installation.
Open bearings dissipate heat more efficiently than sealed bearings.
Sealed bearings block out dust better than open bearings, but retain more heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | For Shaft Surface Smoothness (Ra), microinch | Temp. Range, °F | Specifications Met | Each | |
Open | ||||||||||||
1/4" | 7/16" | 1/4" | Steel | 360 | 260 | 35,000 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 000000 |
1/4" | 7/16" | 5/16" | Steel | 570 | 470 | 35,000 | Required | 8 | -40° to 280° | __ | 0000000 | 0000 |
1/4" | 7/16" | 7/16" | Steel | 920 | 870 | 35,000 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 0000 |
Sealed—Both Sides | ||||||||||||
1/4" | 7/16" | 7/16" | Steel | 570 | 470 | 21,000 | Lubricated | 8 | -20° to 210° | __ | 00000000 | 00000 |
One-Way Locking Needle-Roller Bearing Clutches
The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed. Also known as drawn-cup roller clutches. An arrow on the lip indicates the rotational direction that locks the bearings.
Single-row bearings do not support loads from any direction. To support radial loads, use with our Needle-Roller Bearings.
Bearings with 301 stainless steel springs handle higher temperatures than bearings with acetal springs.
For technical drawings and 3-D models, click on a part number.
For Shaft Dia. | For Housing ID | Wd. | Ring Material | Max. Speed, rpm | Max. Torque, ft.-lbs. | Lubrication | For Shaft Surface Smoothness (Ra), microinch | Temp. Range, °F | Each | |
Single Row | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Acetal Plastic Springs | ||||||||||
1/4" | 7/16" | 1/2" | Steel | 20,000 | 1.5 | Required | 16 | -20° to 200° | 0000000 | 000000 |
301 Stainless Steel Springs | ||||||||||
1/4" | 7/16" | 1/2" | Steel | 20,000 | 1.5 | Required | 16 | -20° to 250° | 0000000 | 00000 |
Oil-Embedded Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 7/32" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
7/16" | 1/2" | 215 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
7/16" | 3/4" | 320 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
For 1/4" Shaft Dia. | |||||||
7/16" | 3/8" | 185 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
7/16" | 1/2" | 250 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
7/16" | 5/8" | 310 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
7/16" | 3/4" | 370 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
7/16" | 7/8" | 430 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
7/16" | 1" | 500 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For 5/16" Shaft Dia. | |||||||
7/16" | 1/4" | 155 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
7/16" | 5/16" | 195 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
7/16" | 3/8" | 230 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
7/16" | 7/16" | 270 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
7/16" | 1/2" | 310 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
7/16" | 5/8" | 390 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
7/16" | 11/16" | 420 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
7/16" | 3/4" | 460 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
7/16" | 1" | 620 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
7/16" | 1 1/8" | 700 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
7/16" | 1 1/4" | 780 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
7/16" | 1 3/8" | 850 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For 3/8" Shaft Dia. | |||||||
7/16" | 1/4" | 185 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
7/16" | 3/8" | 280 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
7/16" | 1/2" | 370 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
7/16" | 3/4" | 560 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
High-Load Oil-Embedded Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 5/16" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
7/16" | 1/4" | 270 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 00000 |
7/16" | 3/8" | 410 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 000 |
7/16" | 1/2" | 550 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 000 |
7/16" | 5/8" | 690 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 000 |
7/16" | 3/4" | 830 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
7/16" | 1" | 1,100 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
Light Duty Dry-Running Sleeve Bearings
Use where high loads and speeds are not required.
MDS-filled nylon bearings create less friction than standard nylon bearings, making them more wear resistant.
Acetal bearings have low moisture absorption and are more chemical resistant than nylon and MDS-filled nylon bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
Nylon Bearings | ||||||
---|---|---|---|---|---|---|
For 5/16" Shaft Dia. | ||||||
7/16" | 1/2" | 47 lbs. @ 120 rpm | White | -10° to 220° | 000000 | 00000 |
7/16" | 5/8" | 55 lbs. @ 120 rpm | White | -10° to 220° | 00000000 | 000 |
MDS-Filled Nylon Bearings | ||||||
For 5/16" Shaft Dia. | ||||||
7/16" | 1/2" | 50 lbs. @ 120 rpm | Black | -40° to 170° | 00000000 | 0000 |
7/16" | 5/8" | 65 lbs. @ 120 rpm | Black | -40° to 170° | 00000000 | 0000 |
Acetal Bearings | ||||||
For 5/16" Shaft Dia. | ||||||
7/16" | 1/2" | 42 lbs. @ 120 rpm | White | -20° to 180° | 000000 | 0000 |
7/16" | 5/8" | 50 lbs. @ 120 rpm | White | -20° to 180° | 000000 | 0000 |
Ultra-Low-Friction Dry-Running Sleeve Bearings
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
PTFE bearings have good chemical resistance.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
High-Temperature Dry-Running Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
841 bearing bronze bearings are porous and embedded with graphite for continuous lubrication.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication Method | Temperature Range, °F | Each | |
841 Bearing Bronze | ||||||
---|---|---|---|---|---|---|
For 5/16" Shaft Dia. | ||||||
7/16" | 1/4" | 125 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
7/16" | 3/8" | 185 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
7/16" | 1/2" | 250 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
7/16" | 5/8" | 310 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
7/16" | 3/4" | 370 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
7/16" | 1" | 500 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
Food Industry Dry-Running Sleeve Bearings
Made of FDA-listed materials or FDA compliant, these bearings are for use in food applications. They also withstand caustic and washdown environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
UHMW Plastic Bearings | |||||||
---|---|---|---|---|---|---|---|
For 5/16" Shaft Dia. | |||||||
7/16" | 1/2" | 31 lbs. @ 120 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 00000000 | 00000 |
7/16" | 5/8" | 39 lbs. @ 120 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 00000000 | 0000 |
Multipurpose Sleeve Bearings
These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 5/16" Shaft Dia. | ||||||
7/16" | 1/4" | 310 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
7/16" | 3/8" | 460 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
7/16" | 1/2" | 620 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
7/16" | 3/4" | 930 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
7/16" | 1" | 1,250 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
Oil-Embedded Flanged Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | ||||||||||
7/16" | 1/2" | 1/2" | 1/16" | 250 lbs. @ 120 rpm | 290 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
For 5/16" Shaft Dia. | ||||||||||
7/16" | 3/8" | 9/16" | 1/16" | 230 lbs. @ 120 rpm | 340 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
7/16" | 1/2" | 9/16" | 1/16" | 310 lbs. @ 120 rpm | 340 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
7/16" | 3/4" | 9/16" | 1/16" | 460 lbs. @ 120 rpm | 340 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
High-Load Oil-Embedded Flanged Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes these bearings to release a thin layer of oil onto their surface. Color is silver because of the iron.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | ||||||||||
7/16" | 1/2" | 1/2" | 1/16" | 500 lbs. @ 120 rpm | 320 lbs. @ 120 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 00000 |
For 5/16" Shaft Dia. | ||||||||||
7/16" | 3/8" | 9/16" | 1/16" | 410 lbs. @ 120 rpm | 340 lbs. @ 120 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 000000 | 000 |
7/16" | 1/2" | 9/16" | 1/16" | 550 lbs. @ 120 rpm | 340 lbs. @ 120 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 0000000 | 000 |
7/16" | 3/4" | 9/16" | 1/16" | 830 lbs. @ 120 rpm | 340 lbs. @ 120 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 0000000 | 0000 |
7/16" | 7/8" | 9/16" | 1/16" | 970 lbs. @ 120 rpm | 330 lbs. @ 120 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 0000 |
Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 5/16" Shaft Dia. | ||||||||||
7/16" | 3/8" | 9/16" | 1/16" | 230 lbs. @ 120 rpm | 340 lbs. @ 120 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 00000 |
7/16" | 1/2" | 9/16" | 1/16" | 310 lbs. @ 120 rpm | 340 lbs. @ 120 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 0000 |
7/16" | 3/4" | 9/16" | 1/16" | 460 lbs. @ 120 rpm | 340 lbs. @ 120 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 0000 |
Food Industry Oil-Embedded Flanged Sleeve Bearings
The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
841 Bronze Bearings | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For 5/16" Shaft Dia. | |||||||||||
7/16" | 3/8" | 9/16" | 1/16" | 230 lbs. @ 120 rpm | 340 lbs. @ 120 rpm | Lubricated | ISO 100 Oil | -75° to 300° | NSF Registered H1 | 000000 | 00000 |
High-Load Food Industry Oil-Embedded Flanged Sleeve Bearings
Support heavy loads that are often found in bottling and filling lines in food plants—these bearings contain extra iron and FDA-compliant oil. The oil is safe to touch food, though it shouldn’t regularly come in contact. Startup friction causes these bearings to release a thin layer of oil onto their surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft.
863 iron-copper bearings contain more iron than 841 bearing bronze bearings, so they’re stronger and resist failing if their load suddenly and drastically increases. They’re also known as Super Oilite® bearings.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Length | Flange OD | Flange Thickness | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
863 Iron-Copper Bearings | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For 5/16" Shaft Dia. | |||||||||||
7/16" | 3/8" | 9/16" | 1/16" | 410 lbs. @ 120 rpm | 340 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | FDA Compliant 21 CFR 178.3570 | 000000 | 00000 |
Oil-Embedded Flanged Sleeve Bearings with Certification
These bearings come with a traceable lot number and material test report. They are also known as Oilite® bearings; startup friction causes them to release a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 5/16" Shaft Dia. | ||||||||||
7/16" | 3/8" | 9/16" | 1/16" | 230 lbs. @ 120 rpm | 340 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 00000 |
Light Duty Dry-Running Flanged Sleeve Bearings
Use where high loads and speeds are not required.
MDS-filled nylon bearings create less friction than standard nylon bearings, making them more wear resistant.
Acetal bearings have low moisture absorption and are more chemical resistant than nylon and MDS-filled nylon bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Nylon Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 5/16" Shaft Dia. | |||||||||
7/16" | 3/8" | 9/16" | 3/64" | 35 lbs. @ 120 rpm | 29 lbs. @ 120 rpm | White | -20° to 250° | 00000000 | 00000 |
7/16" | 7/16" | 9/16" | 1/16" | 41 lbs. @ 120 rpm | 29 lbs. @ 120 rpm | White | -20° to 250° | 00000000 | 0000 |
7/16" | 1/2" | 9/16" | 1/16" | 47 lbs. @ 120 rpm | 29 lbs. @ 120 rpm | White | -20° to 250° | 00000000 | 0000 |
7/16" | 5/8" | 9/16" | 1/16" | 55 lbs. @ 120 rpm | 29 lbs. @ 120 rpm | White | -20° to 210° | 00000000 | 0000 |
MDS-Filled Nylon Bearings | |||||||||
For 5/16" Shaft Dia. | |||||||||
7/16" | 3/8" | 9/16" | 1/16" | 40 lbs. @ 120 rpm | 33 lbs. @ 120 rpm | Black | -40° to 170° | 00000000 | 0000 |
7/16" | 7/16" | 9/16" | 1/16" | 41 lbs. @ 120 rpm | 29 lbs. @ 120 rpm | Black | -40° to 170° | 00000000 | 0000 |
7/16" | 1/2" | 9/16" | 1/16" | 50 lbs. @ 120 rpm | 33 lbs. @ 120 rpm | Black | -40° to 170° | 00000000 | 0000 |
7/16" | 5/8" | 0.56" | 0.06" | 65 lbs. @ 120 rpm | 32 lbs. @ 120 rpm | Black | -40° to 175° | 00000000 | 0000 |
Acetal Bearings | |||||||||
For 5/16" Shaft Dia. | |||||||||
7/16" | 3/8" | 9/16" | 3/64" | 32 lbs. @ 120 rpm | 26 lbs. @ 120 rpm | White | -40° to 180° | 0000000 | 0000 |
7/16" | 7/16" | 9/16" | 1/16" | 37 lbs. @ 120 rpm | 26 lbs. @ 120 rpm | White | -40° to 180° | 0000000 | 0000 |
7/16" | 1/2" | 9/16" | 1/16" | 42 lbs. @ 120 rpm | 26 lbs. @ 120 rpm | White | -20° to 180° | 0000000 | 0000 |
Easy-Install Dry-Running Flanged Sleeve Bearings
A slit running along the length of these bearings allows you to quickly slip them into a housing—no tools required.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Nylon Plastic Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 3/8" Shaft Dia. | |||||||||
7/16" | 13/32" | 19/32" | 1/32" | 45 lbs. @ 40 rpm | 49 lbs. @ 40 rpm | White | 0° to 200° | 0000000 | 00000 |
Ultra-Low-Friction Dry-Running Flanged Sleeve Bearings
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
PTFE bearings have good chemical resistance.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
PTFE Plastic Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 5/16" Shaft Dia. | ||||||||||
7/16" | 1/2" | 9/16" | 1/16" | 15 lbs. @ 120 rpm | 9.5 lbs. @ 120 rpm | White | -350° to 500° | ASTM D1710, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
Food Industry Dry-Running Flanged Sleeve Bearings
Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
UHMW Plastic Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 5/16" Shaft Dia. | ||||||||||
7/16" | 3/8" | 9/16" | 3/64" | 23 lbs. @ 120 rpm | 19 lbs. @ 120 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 000000000 | 00000 |
7/16" | 7/16" | 9/16" | 1/16" | 27 lbs. @ 120 rpm | 19 lbs. @ 120 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 000000000 | 0000 |
7/16" | 1/2" | 9/16" | 1/16" | 31 lbs. @ 120 rpm | 19 lbs. @ 120 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 000000000 | 0000 |
High-Temperature Dry-Running Flanged Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
841 bearing bronze bearings are porous and embedded with graphite for continuous lubrication. They handle higher temperatures than 932 bearing bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Temperature Range, °F | Each | |
841 Bearing Bronze | ||||||||
---|---|---|---|---|---|---|---|---|
For 5/16" Shaft Dia. | ||||||||
7/16" | 3/8" | 9/16" | 1/16" | 185 lbs. @ 120 rpm | 270 lbs. @ 120 rpm | -50° to 700° | 0000000 | 00000 |
7/16" | 1/2" | 9/16" | 1/16" | 250 lbs. @ 120 rpm | 270 lbs. @ 120 rpm | -50° to 700° | 0000000 | 0000 |
7/16" | 3/4" | 9/16" | 1/16" | 370 lbs. @ 120 rpm | 270 lbs. @ 120 rpm | -50° to 700° | 0000000 | 0000 |
Multipurpose Flanged Sleeve Bearings
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | PV Max. | Each | |
932 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | ||||||||||
7/16" | 1/2" | 1/2" | 1/16" | 500 lbs. @ 120 rpm | 580 lbs. @ 120 rpm | Required | -350° to 450° | __ | 00000000 | 00000 |
For 5/16" Shaft Dia. | ||||||||||
7/16" | 3/8" | 9/16" | 1/16" | 460 lbs. @ 120 rpm | 680 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 0000000 | 0000 |
7/16" | 1/2" | 9/16" | 1/16" | 620 lbs. @ 120 rpm | 680 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 0000000 | 0000 |
7/16" | 3/4" | 9/16" | 1/16" | 930 lbs. @ 120 rpm | 680 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 0000000 | 0000 |
Corrosion-Resistant Flanged Sleeve Bearings
The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
954 Aluminum-Bronze Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 5/16" Shaft Dia. | |||||||||
7/16" | 3/8" | 9/16" | 1/16" | 520 lbs. @ 120 rpm | 770 lbs. @ 120 rpm | Required | -350° to 500° | 000000 | 00000 |
7/16" | 1/2" | 9/16" | 1/16" | 700 lbs. @ 120 rpm | 770 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 00000 |
7/16" | 3/4" | 9/16" | 1/16" | 1,050 lbs. @ 120 rpm | 770 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 00000 |
Multipurpose Flanged Sleeve Bearings with Certification
Furnished with a traceable lot number and material test report, these 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 5/16" Shaft Dia. | |||||||||
7/16" | 3/8" | 9/16" | 1/16" | 460 lbs. @ 120 rpm | 680 lbs. @ 120 rpm | Required | -70° to 450° | 000000000 | 000000 |