95 mm Housing ID Bearings

Filter by

Bearing Construction

Bearing Seal Type

Bearing Type

DFARS Compliance

System of Measurement

For Housing ID

For Load Direction

Lubrication

Maximum Temperature

Minimum Temperature

Ring Material

RoHS Compliance

Shaft Diameter

Shaft Mount Type

Shaft Type

Width

Cage Material

REACH Compliance

Dynamic Radial Load Capacity

Static Radial Load Capacity

Bearing Trade Number

Forward

How can we improve?

11 Products

About Ball and Roller Bearings

Ball Bearings

Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.

Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.

For technical drawings and 3-D models, click on a part number.

Shielded

					Radial Load Cap., lbs.
Bearing Trade Number	For Shaft Dia.	For Housing ID	Wd.	Ring Material	Dynamic	Static	Max. Speed, rpm	Lubrication	Temp. Range, °F	ABEC Rating	Specifications Met		Each
6012-2Z	60mm	95mm	18mm	Steel	7,050	5,200	8,500	Lubricated	-20° to 230°	ABEC-1	DIN 625-1	00000000	0000000

Sealed

					Radial Load Cap., lbs.
Bearing Trade Number	For Shaft Dia.	For Housing ID	Wd.	Ring Material	Dynamic	Static	Max. Speed, rpm	Lubrication	Temp. Range, °F	ABEC Rating	Specifications Met		Each
6012-2RS	60mm	95mm	18mm	Steel	7,050	5,200	3,700	Lubricated	-20° to 230°	ABEC-1	DIN 625-1	00000000	0000000

Permanently Lubricated Ball Bearings

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.

Sealed bearings have even better resistance to dust and contaminants than open bearings.

For technical drawings and 3-D models, click on a part number.

					Radial Load Cap., lbs.
Bearing Trade Number	For Shaft Dia.	For Housing ID	Wd.	Ring Material	Dynamic	Static	Max. Speed, rpm	Lubrication	Temp. Range, °F	ABEC Rating		Each
Sealed
6012-2RS	60mm	95mm	18mm	Steel	5,100	4,400	3,700	Lubricated	10° to 200°	ABEC-1	00000000	0000000

Precision Ball Bearings

Shielded

Sealed

For greater accuracy and higher speeds, these bearings are made to tighter tolerances than standard ball bearings.

Shielded bearings dissipate heat more efficiently than sealed bearings.

Sealed bearings block out dust and other contaminants better than shielded bearings.

For technical drawings and 3-D models, click on a part number.

					Radial Load Cap., lbs.
Bearing Trade Number	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Ring Material	Dynamic	Static	Max. Speed, rpm	Lubrication	Temp. Range, °F	ABEC Rating		Each
Shielded
6012-2Z	60	95	18	Steel	6,900	5,200	7,500	Lubricated	-20° to 230°	ABEC-3	0000000	0000000
Sealed
6012-2RS	60	95	18	Steel	6,900	5,200	4,500	Lubricated	-30° to 210°	ABEC-3	0000000	000000

Stainless Steel Ball Bearings

Bearings are 440C stainless steel for good corrosion resistance.

Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.

For technical drawings and 3-D models, click on a part number.

Sealed

					Radial Load Cap., lbs.
Bearing Trade Number	For Shaft Dia.	For Housing ID	Wd.	Ring Material	Dynamic	Static	Max. Speed, rpm	Lubrication	Temp. Range, °F	ABEC Rating		Each
6012-2RS	60mm	95mm	18mm	440C Stainless Steel	6,600	5,200	4,000	Lubricated	-20° to 210°	ABEC-1	00000000	0000000

Ultra-Thin Ball Bearings

Shielded

These bearings have twice as many contact points as angular-contact ball bearings. Fit onto large-diameter hollow shafts to run air and hydraulic lines, electrical wiring, and other components through moving parts in assemblies such as index and rotary tables, packaging equipment, and robotics.

Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.

For technical drawings and 3-D models, click on a part number.

			Radial Load Cap., lbs.		Thrust Load Cap., lbs.		Moment Load Cap., ft.-lbs.
For Shaft Dia.	For Housing ID	Wd.	Dynamic	Static	Dynamic	Static	Dynamic	Static	Max. Speed, rpm	Lubrication	Temp. Range, °F	ABEC Rating		Each
Steel Ring
Shielded
75mm	95mm	10mm	2,800	2,900	Not Rated	Not Rated	Not Rated	Not Rated	12,500	Lubricated	-40° to 150°	ABEC-1	00000000	0000000

High-Speed Angular-Contact Thrust Ball Bearings

Sealed

An ABEC-7 rating means these bearings are made to some of the tightest tolerances, so they operate at the highest speeds.

Sealed bearings block out dust and other contaminants better than open bearings, but retain the most heat.

For technical drawings and 3-D models, click on a part number.

					Combined Load Cap., lbs.
Bearing Trade Number	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Ring Material	Dynamic	Static	Max. Speed, rpm	Lubrication	Contact Angle	Temp. Range, °F	ABEC Rating		Each
Single Row
Sealed
7012	60	95	18	Steel	8,300	6,850	14,900	Lubricated	15°	0° to 230°	ABEC-7	0000000	000000000

Tapered-Roller Bearings

Found anywhere from machine tool spindles to conveyor rollers, these bearings have a two-piece design that allows for adjustment.

For technical drawings and 3-D models, click on a part number.

				Radial Load Cap., lbs.		Thrust Load Cap., lbs.
For Shaft Dia.	For Housing ID	Wd.	Bearing Trade Number	Dynamic	Static	Dynamic	Static	Max. Speed, rpm	Lubrication	Temp. Range, °F		Each
Steel Ring
Open
60mm	95mm	17.5mm	32012	5,600	29,500	4,100	37,000	1,800	Required	-60° to 200°	0000000	000000

High-Load Face-Mount Crossed-Roller Bearings

Open bearings dissipate heat more efficiently than sealed bearings.

Sealed bearings block out dust and other contaminants better than open bearings, but retain more heat.

For technical drawings and 3-D models, click on a part number.

				Combined Load Cap., lbs.
For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Ring Material	Dynamic	Static	Max. Speed, rpm	Lubrication	Temp. Range, °F	Features		Each
Open
35	95	15	Steel	3,850	4,650	1,100	Required	0° to 230°	Lubrication Groove, Two Lubrication Holes	0000000	0000000
Sealed
35	95	15	Steel	3,850	4,650	900	Lubricated	0° to 210°	Lubrication Groove, Two Lubrication Holes	0000000	000000