100 mm Bearings | McMaster-Carr

Filter by

System of Measurement

Shaft Diameter

Bearing Seal Type

Width

Bearing Type

For Load Direction

Combined Radial and Thrust

Combined Radial, Thrust, and Moment

Bearing Construction

For Housing ID

Bearing Trade Number

Shaft Mount Type

Lubrication

Thickness

Shaft Type

Maximum Rotation Speed

Dynamic Combined Load Capacity

Less than 10,000 lbf

10,000 lbf to 19,999 lbf

100,000 lbf or greater

Dynamic Thrust Load Capacity

10,000 lb. to 19,999 lb.

20,000 lb. to 99,999 lb.

Ball Bearing Profile

Maximum Temperature

REACH

RoHS

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

Rotation Speed

Material

8 Products

Thin-Profile Crossed-Roller Bearings

For a more compact machine, these bearings have thinner inner and outer rings than high-load crossed-roller bearings. Route hydraulic lines, electrical wiring, and other components through the inside of the bearing. The rollers face in alternating directions to allow for rigid, accurate motion under any combination of radial, thrust, and moment (twisting) loads. Use in applications where highly accurate motion is necessary, such as machine tools and industrial robots.

Open Bearing—Open bearings dissipate heat more efficiently than sealed bearings.

Sealed Bearing—Sealed bearings block out dust and other contaminants better than open bearings, but retain more heat.

				Combined Load Cap., lbf
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Dynamic	Static	Max. Rotation Speed, rpm	Lubrication	Temp. Range, ° F	Features		Each
For Combined Radial, Thrust, and Moment Load—Open with Steel Ring



		100	111	5	750	1,450	750	Required	0 to 175	Lubrication Hole	0000000	0000000


		For Combined Radial, Thrust, and Moment Load—Sealed with Steel Ring



				100	116	8	1,600	3,100	350	Lubricated	0 to 175	Lubrication Groove, Lubrication Hole	0000000	000000

Spherical-Roller Bearings

Two rows of rollers give these bearings dynamic radial load capacities over five times higher than comparably sized tapered-roller bearings. Also known as rock crusher bearings, they handle heavy shock loads and are used for metal milling machinery, mining and oil field equipment, and in paper mills.

						Combined Load Cap., lbf
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Bearing Trade No.	Ring Material	Dynamic	Static	Max. Rotation Speed, rpm	Lubrication	Max. Temp., ° F		Each
Open Bearing



		100	180	46	22220	Steel	102,000	110,000	2,800	Required	390	0000000	0000000

High-Load Crossed-Roller Bearings

The thicker inner and outer raceways on these bearings can handle heavier loads than the thin-profile crossed-roller bearings. The rollers face in alternating directions to allow for rigid, accurate motion under any combination of radial, thrust, and moment (twisting) loads. Use in applications where highly accurate motion is necessary, such as machine tools and industrial robots.

Open Bearing—Open bearings dissipate heat more efficiently than sealed bearings.

Sealed Bearing—Sealed bearings block out dust and other contaminants better than open bearings, but retain more heat.

				Combined Load Cap., lbf
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Dynamic	Static	Max. Rotation Speed, rpm	Lubrication	Temp. Range, ° F	Features		Each
For Combined Radial, Thrust, and Moment Load—Open with Steel Ring



		100	150	20	11,400	16,200	600	Required	0 to 245	—	0000000	0000000


		For Combined Radial, Thrust, and Moment Load—Sealed with Steel Ring



				100	150	20	11,400	16,200	480	Lubricated	0 to 245	Lubrication Groove, Two Lubrication Holes	0000000	000000

Thrust Ball Bearings

For silky-smooth motion, the balls inside these bearings roll nearly friction-free. You'll often find them at the end of a shaft or between a stationary and rotating surface, such as on a propeller or rotary table.

These bearings come as three separate pieces—one cage and two washers. The cage holds the balls in place, while the washers create a surface for the balls to roll on. This design is easy to lubricate, but the oil will attract dust and grime since it's exposed.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

	OD, mm	Thk., mm	Cage Material	Dynamic Thrust Load Cap., lb.	Max. Rotation Speed, rpm	Temp. Range, ° F	Includes		Each
Steel



	100	135	25	Steel	19,100	2,400	-40 to 250	Two Washers	00000000	0000000

Needle-Roller Thrust Bearings


Bearings	Washers

Small but mighty, our thinnest rolling thrust bearings slot into tight spaces and spin at whirring speeds. Their long, slender rollers support thrust loads and reduce friction in everything from machine tool spindles to gearboxes.

A cage holds the rollers in place. You can install these bearings without washers between hardened, ground surfaces for the thinnest profile. If you’re working with unhardened, unground surfaces, you’ll need two washers for the rollers to run on. This three-piece design is easy to lubricate, but the oil will attract dust and grime since it’s exposed.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

	Thrust Bearings										Thin Washers
	For Shaft Dia., mm	OD, mm	Thk., mm	Cage Material	Dynamic Thrust Load Cap., lb.	Max. Rotation Speed, rpm	Temp. Range, ° F	Specs. Met		Each	Thk., mm		Each
Steel



		100	135	4	Steel	20,400	2,420	0 to 240	DIN 5405-3, ISO 303	00000000	000000	1	00000000	000000

Washers for Needle-Roller Thrust Bearings

Adapt needle-roller thrust bearings to use on unhardened, unground surfaces.

For Shaft Dia., mm	OD, mm	Thk., mm	Washer Material	Specs. Met		Each
100	135	1	Steel	DIN 5405-3, ISO 303	00000000	000000