80mm Bearings | McMaster-Carr

Filter by

System of Measurement

Shaft Diameter

Width

Bearing Seal Type

Bearing Trade Number

Bearing Type

For Load Direction

Combined Radial and Thrust

Combined Radial, Thrust, and Moment

For Housing ID

Material

Bearing Construction

Ball Bearing Profile

Cage Material

Roller Bearing Type

Inner Ring Type

Shaft Mount Type

Maximum Rotation Speed

Dynamic Radial Load Capacity

Less than 10,000 lb.

10,000 lb. to 19,999 lb.

20,000 lb. to 29,999 lb.

Shaft Type

Round

Rotation Speed

Less than 10,000 rpm

10,000 rpm to 19,999 rpm

Maximum Temperature

REACH

RoHS

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

22 Products

Ball Bearings

Shielded

Sealed

Smoother than smooth—the balls inside these bearings roll nearly friction-free. You’ll often find them on rapidly rotating parts, from the whirring chuck on a power drill to the spinning shaft on an electric motor.

Shielded—The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

ABEC Rating—Bearings with an ABEC rating meet industry tolerance standards established by the Annular Bearing Engineers Committee (ABEC). They're rated on a scale from 1 to 9. The higher the rating, the tighter the tolerance. Bearings rated ABEC 1 or 3 are precise enough for most applications. If your application consistently runs at high speeds or requires high accuracy, consider bearings rated ABEC 5 or higher, since they generate less friction and heat.

							Temp. Range, ° F
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Inner Ring Type	Bearing Trade No.		Each
Shielded







				Steel

				80	100	10	1	2,850	12,700	-40	150	Standard	6816-2Z	00000000	0000000


				80	125	22	1	11,400	6,300	-20	230	Standard	6016-2Z	00000000	000000
				80	125	22	3	11,100	5,600	-20	230	Standard	6016-2Z	0000000	000000
				80	140	26	3	16,350	4,800	-20	230	Standard	6216-2Z	0000000	000000
				80	170	39	3	29,200	4,300	-20	230	Standard	6316-2Z	0000000	000000


				Sealed







								Steel

								80	125	22	1	11,400	2,800	-20	230	Standard	6016-2RS	00000000	000000


								80	125	22	3	11,100	3,400	-30	210	Standard	6016-2RS	0000000	000000
								80	140	26	3	16,350	3,000	-30	210	Standard	6216-2RS	0000000	000000
								80	170	39	3	29,200	2,600	-30	210	Standard	6316-2RS	0000000	000000

Tapered-Roller Bearings

Found anywhere from machine tool spindles to conveyor rollers, these bearings have a two-piece design that allows for adjustment.

					Radial Load Cap., lb.		Thrust Load Cap., lb.
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Bearing Trade No.	Dynamic	Static	Dynamic	Static	Max. Rotation Speed, rpm	Lubrication	Temp. Range, ° F		Each
For Combined Radial and Thrust Load—Open with Steel Ring



		80	125	22	32016	9,650	53,500	7,000	55,500	1,400	Required	-60 to 200	0000000	0000000

Thin-Profile Crossed-Roller Bearings

For a more compact machine, these bearings have thinner inner and outer rings than high-load crossed-roller bearings. Route hydraulic lines, electrical wiring, and other components through the inside of the bearing. The rollers face in alternating directions to allow for rigid, accurate motion under any combination of radial, thrust, and moment (twisting) loads. Use in applications where highly accurate motion is necessary, such as machine tools and industrial robots.

Open Bearing—Open bearings dissipate heat more efficiently than sealed bearings.

Sealed Bearing—Sealed bearings block out dust and other contaminants better than open bearings, but retain more heat.

				Combined Load Cap., lbf
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Dynamic	Static	Max. Rotation Speed, rpm	Lubrication	Temp. Range, ° F	Features		Each
For Combined Radial, Thrust, and Moment Load—Open with Steel Ring



		80	91	5	680	1,200	900	Required	0 to 175	Lubrication Hole	0000000	0000000


		For Combined Radial, Thrust, and Moment Load—Sealed with Steel Ring



				80	96	8	1,400	2,500	460	Lubricated	0 to 175	Four Lubrication Holes	0000000	000000

High-Load Face-Mount Crossed-Roller Bearings

With thicker inner and outer raceways, these bearings can handle heavier loads than thin-profile crossed roller bearings. Mounting holes on the inner and outer rings allow for fastening onto hollow joints and shafts. The rollers face in alternating directions to allow for rigid, accurate motion under any combination of radial, thrust, and moment (twisting) loads. Use in applications where highly accurate motion is necessary, such as machine tools and industrial robots.

Open Bearing—Open bearings dissipate heat more efficiently than sealed bearings.

Sealed Bearing—Sealed bearings block out dust and other contaminants better than open bearings, but retain more heat.

				Combined Load Cap., lbf
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Dynamic	Static	Max. Rotation Speed, rpm	Lubrication	Temp. Range, ° F	Features		Each
For Combined Radial, Thrust, and Moment Load—Open with Steel Ring



		80	165	22	11,400	16,100	600	Required	0 to 230	Lubrication Groove, Two Lubrication Holes	0000000	0000000


		For Combined Radial, Thrust, and Moment Load—Sealed with Steel Ring



				80	165	22	11,400	16,100	450	Lubricated	0 to 210	Lubrication Groove, Two Lubrication Holes	0000000	000000

Spherical-Roller Bearings

Two rows of rollers give these bearings dynamic radial load capacities over five times higher than comparably sized tapered-roller bearings. Also known as rock crusher bearings, they handle heavy shock loads and are used for metal milling machinery, mining and oil field equipment, and in paper mills.

						Combined Load Cap., lbf
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Bearing Trade No.	Ring Material	Dynamic	Static	Max. Rotation Speed, rpm	Lubrication	Max. Temp., ° F		Each
Open Bearing



		80	140	33	22216	Steel	59,250	61,750	3,600	Required	390	0000000	0000000

Permanently Lubricated Ball Bearings

Install and forget these self-lubricating bearings. Their lubricant is a solid material that fills the space between the balls and releases oil over time, so you'll never need to add more.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

							Temp. Range, ° F
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Inner Ring Type	Bearing Trade No.		Each
Sealed







				Steel

				80	125	22	1	8,200	2,900	10	200	Standard	6016-2RS	00000000	0000000

Thrust Ball Bearings

For silky-smooth motion, the balls inside these bearings roll nearly friction-free. You'll often find them at the end of a shaft or between a stationary and rotating surface, such as on a propeller or rotary table.

These bearings come as three separate pieces—one cage and two washers. The cage holds the balls in place, while the washers create a surface for the balls to roll on. This design is easy to lubricate, but the oil will attract dust and grime since it's exposed.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

	OD, mm	Thk., mm	Cage Material	Dynamic Thrust Load Cap., lb.	Max. Rotation Speed, rpm	Temp. Range, ° F	Includes		Each
Steel



	80	105	19	Steel	10,000	3,100	-40 to 250	Two Washers	00000000	0000000

High-Load Crossed-Roller Bearings

The thicker inner and outer raceways on these bearings can handle heavier loads than the thin-profile crossed-roller bearings. The rollers face in alternating directions to allow for rigid, accurate motion under any combination of radial, thrust, and moment (twisting) loads. Use in applications where highly accurate motion is necessary, such as machine tools and industrial robots.

Open Bearing—Open bearings dissipate heat more efficiently than sealed bearings.

Sealed Bearing—Sealed bearings block out dust and other contaminants better than open bearings, but retain more heat.

				Combined Load Cap., lbf
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Dynamic	Static	Max. Rotation Speed, rpm	Lubrication	Temp. Range, ° F	Features		Each
For Combined Radial, Thrust, and Moment Load—Open with Steel Ring



		80	120	16	7,200	9,700	750	Required	0 to 230	Lubrication Groove, Two Lubrication Holes	0000000	0000000


		For Combined Radial, Thrust, and Moment Load—Sealed with Steel Ring



				80	120	16	7,200	9,700	600	Lubricated	0 to 210	Lubrication Groove, Two Lubrication Holes	0000000	000000

Washers for Needle-Roller Thrust Bearings

Adapt needle-roller thrust bearings to use on unhardened, unground surfaces.

For Shaft Dia., mm	OD, mm	Thk., mm	Washer Material	Specs. Met		Each
80	105	1	Steel	DIN 5405-3, ISO 303	00000000	000000
80	105	5.75	Steel	—	00000000	00000

Needle-Roller Thrust Bearings


Bearings	Washers

Small but mighty, our thinnest rolling thrust bearings slot into tight spaces and spin at whirring speeds. Their long, slender rollers support thrust loads and reduce friction in everything from machine tool spindles to gearboxes.

A cage holds the rollers in place. You can install these bearings without washers between hardened, ground surfaces for the thinnest profile. If you’re working with unhardened, unground surfaces, you’ll need two washers for the rollers to run on. This three-piece design is easy to lubricate, but the oil will attract dust and grime since it’s exposed.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

	Thrust Bearings										Thin Washers			Thick Washers
	For Shaft Dia., mm	OD, mm	Thk., mm	Cage Material	Dynamic Thrust Load Cap., lb.	Max. Rotation Speed, rpm	Temp. Range, ° F	Specs. Met		Each	Thk., mm		Each	Thk., mm		Each
Steel



		80	105	4	Steel	12,500	3,100	0 to 240	DIN 5405-2	000000	000000	1	00000000	000000	5.75	00000000	000000